Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
TradingGlobal solutions made easy
KEAS Control Systems India Private Limitedwww.keascontrols.com
Your come true “DREAMS”
About KEAS
KEAS CONTROL SYSTEMS INDIA PRIVATE LIMITED(KCSIPL) was established in the early years of 21st Century, as a Private Limited Company to provide Quality Engineering and Automation Solutions to major Process and other Industries in core sectors like Oil and Gas, Power, Sugar, Steel, Cement etc. KCSIPL is a technology-driven company that infuses Engineering with imagination. We offer, in Electrical & Instrumentation, a wide range of advanced solutions, services and products. Head quartered at Coimbatore (India), KCSIPL has Regional offices at Chennai, Hyderabad,Mumbai, Kolkata, Delhi, Bangalore, Ahmedabad and Pune. Branch offices at Tiruchirapalli, Hosur, Madurai, Pondicherry and Representative Office at Malaysia.
We are an ISO 9001:2008 certified Company and our QMS has been certified by Det Norske Veritas (DNV). We are certified by theElectrical Licensing Board of India, with an ESA Grade Contractor License to carry out Electrical works with no limitations on Voltage or Capacity.
Our Strategic Business Units :
Engineering Services - “Forefront of Technology”
Engineering Procurement and Construction - “Energising Growth Naturally”
Control Panel and E-House Manufacturing - “Technology Customized”Control Panel : KCSIPL meets the varying needs of customer with a wide range of products maintaining high and Consistent Quality Standards. PCC, MCC, DCS / PLC Panels, AMF Panels, VFD Panels, APFC Panels, Junction Boxes, F&G Panels.
E-House :Design Engineering, Manufacturing, Construction, Installation and Commissioning.
Startup
As Built
O&M Manual
Site Survey
Conceptional Design
FEED
Detailed Design
3D Modeling
Pre-Commissioning
Commissioning
Our Procurement Services
Creating Functional Specifications, Technical Data Sheets, Issuing RFQs, Vendor Identification and Evaluation, and Preparing Techno-Commercial Analysis.
Our Engineering Services
Site Survey, Conceptual Design, FEED, Detailed Design, Pre-commissioning, Commissioning, Startup, As Built, O&M Manual.
Complete turnkey Solutions for Electrical, Instrumentation and Automation with allied Civil, Structural and Mechanical work in core sectors, Switchyard, Substation, Power Distribution, Calibration, Testing & Commissioning, Site work, O&M, AMC.
Our Construction services
Start-up procedures, Start-up and commissioning services, Troubleshooting,Operation and maintenance Manual, Operator training - classroom/field.
Our Commissioning services
sales@ keascontrols.com | [email protected]
Profile
Your “ ” come trueDREAMS
sales@ keascontrols.com | [email protected]
MyFriend - “ we care”Service Division of KEAS
MyFriend is a dependable one stop 24x7 on call service provider for breakdowns as well as Preventive maintenance of all your home necessities like Electrical Faults, Air Conditioners, Plumbing and Consumer Electronics. We provide Fast, Dependable, Economical and Professional Repair, Services and also undertake Regular Annual Maintenance. Our Service Professionals will conduct study and recommend you with preventive measures to avoid recurring problems, Energy wastage etc., and ensure you a highly peaceful home living.
Employability SkillsSoftskills and Personality Development for InstitutionsCorporate and Management TrainingTechnical Skills Training (PLC/SCADA/DCS/VFD)Conducting Technical workshop in colleges
Training’s Offered :
KCSCL - Training - “Transformation of knowledge to skills”Training division of KEAS
Trading - “Global solutions made easy”
Automation - “Your DREAMS come true”
• Multipole Industrial Connectors
- Flexible Control Cables- Solar Cables- Data Cables- BUS, LAN, Coaxial Cables- Energy Drag Chain Cables- Rubber Cables- Heat Resistance Cables
• Special Cables • Variable Frequency Drives
• Die-cast Aluminum Boxes
• Remote Controllers
• Terminals
• Cable Accessories
• Cable Glands
• Conduits
• Split Conduits
• Energy Drag Chain
• Cable Trolley System
MyFriendMyFriendwe care
MyFriend
MyFriend
EMP
TM
gE nl ie bc mtr ui lc Pa , ,l M lanc ie cha
OrbitRouter
• Industrial Process Automation
• Industrial Machine Automation
Security and Observation System
Time and Attendance systems
Under-Vehicle Surveillance systems
Burglar Alarms
Proximity Card, Biometric, RFID and other access control systems
-
-
-
-
-
• Security Solutions
Asset monitoring systems
Fire Detection and Automated Fire Fighting Systems
Boom Barriers
-
-
-
• Vehicle Tracking System
• Personnel Tracking System
• Mobile Tracking System
• Asset Monitoring
• VOIP
• Grid Monitoring
Field Services - “ Better than you wish, Before you feel a need”• Diesel Generator Sales and Services
• Installation and Commissioning
• Annual Maintenance Contract
• Comprehensive Annual Maintenance Contract
• Overhauling of Diesel Generators
• Spares for Diesel Generators
• 24/7 Service Support
Mahindra AuthorizedSales, Service and
Spares Dealer
Range : 5 KVA to 500 KVA
• CCTV Surveillance Systems
• Other IT enabled solutions
1) A wide range of accessories comprising of: cable glands, fittings for flexible conduits, blanking plugs, enlargers, reducers and lock units.
2) Threaded cable passage in various Pg and metricthread (in accordance with EN 60423) available, for cable entry devices in accordance with EN 50262,as option located vertically, horizontally or at the front. NPT threads on request.
3) Heavy duty enclosures in die-cast aluminium alloyor self-extin- guishing thermoplastic. Surface mounting or bulkhead housings and hoods are available, with or without fixed covers or with mobile pro- tection covers. The enclosures for the use at a voltage of 500Vhave two tabs that prevents the insertion of inserts for the use with 830V. Those for the use with a rated voltage of 830V do not have any tabs and supplementary insulating strips are applied.
4) Metal enclosures powder coated with high resistance to mechanical stress and external agents, Enclosures used for harsh environments are treated with special epoxy powder coating. Certified UL/CSA.
5) Insert in self-extinguishing thermoplastic material reinforced with glass fibers, UL approved, with a limit working temperature from 40°C to + 125°C.
6) Inserts with asymmetric guide rails for preventing incorrect coupling, The inserts have a mechanical duration equal to or over 500 mating/unmating cycles.
7) Inserts manufactured to conform with EN 61984, VDE 0110, VDE 0627, EN 175301-801, UL 1977 standards. They are certified and la- belled with the UL and CSA marks.
8) Special seal gaskets in anti-ageing, oil-resistant and fuel resistant vinyl nitrile elastomer or fluoro elastomer (for use in harsh environments) together with the joints provide an IP66 degree of protection for coupled connectors.
9) Monoblock galvanized steel or stainless steel or self-extinguishing glass filled thermoplastic material locking levers guarantee a perfect closure and sealing.
10) Locking device available in two versions, simple (with one lever) or double (with two levers).
11) Captive insert fastening screws, with anti-loosening flexible wa- sher.
12) Contacts position identified with numbers on both sides of each insert, laser printed or moulded.
13) Contacts in silver or gold-plated copper alloy with connection to the conductors made via captive screws, crimping terminals, spring terminals or screws with incorporated terminal block.
14) Earth terminal with wide contact surface.
15) Stainless steel pegs that facilitate the locking and eliminate da- mages.
16) Captive contact screws, stainless steel wire protector.
17) CE marking attesting the conformity to the requirements of the Directive Low Voltage Device(LVD) 2006/95/EC and of the Di- rective EMC 2004/108/EC for the products developed for industrial applications that require Electromagnetic Compatibility (EMC).
Multipole Industrial Connectors from
Technical features
Global solutions made easy
sales@ keascontrols.com | [email protected]
-S-A series, size A «21x21», 10A - 230V/400V / 4kV / 3, 3-4 poles inserts, screw terminals
-S-A series inserts, 16A - 250V / 4kV / 3,10 ÷ 32p - screw and crimp terminals
-S-D series, inserts, 10A - 250V / 4kV / 3, 7-128 poles - crimp terminals
-S-D series, size 3A«21x21», 10A - 50V / 0,8kV / 3, 8 poles - inserts with crimp terminals
-S-DD series, 10A - 250V / 4kV / 3, 24-216 poles inserts - crimp terminals
-S-E series, 16A - 500V / 6kV / 3, 6-48 poles inserts - screw and crimp terminals
-S-EE series, 16A - 500V / 6kV / 3, 10-92 poles inserts - high density, crimp terminals
-S-ES series, 16A - 500V / 6kV / 3, 6-48 poles inserts - with spring terminals
-S-EP series, 16A - 500V / 6kV / 3, 6-48 poles inserts - Push in terminals
-S-EAV series, 16A - 500V inserts, 6-24 poles - with screw terminals block
-S-EHV series, 16A - 830V inserts - screw and crimp terminals
-S-ESHV series, 16A - 830V / 8 kV / 3 inserts - with spring terminals
-S-HSB series, 35A - 830V / 6kV / 3 inserts - screw terminals
-S-K series, inserts with combined 80A power and 16A signal contacts
-S-Q series inserts, size 3A «21x21»
* S-Q 5/0 16A 230/400V / 4kV / 3-5p + * S-Q 12 10A 400V / 6kV / 3-12p +
-S-QD series inserts, size «32x13»
* S-QD 8/0, 16A 500V / 6kV / 3-8p + * S-QD 17, 10A 250V / 4kV / 3- 17p + * S-QD 4/2, 4x40A 400/690V power + 2x10A 250V signal contacts * Contacts for S-Q / S-QD series
-Enclosures (hoods/housings). Technical characteristics and applications
-Enclosures (hoods/housings). Size 3A «21x21» STD and HE type
-Hoods/housings STD type size 10A «49x16», 16A «66x16», 32A «66x40»
-Hoods/housings STD and STD-HV types sizes 6B,10B, 16B, 24B, 32B, 48B single locking system (1 lever)
-Housings STD and STD-HV types sizes 6B,10B, 16B, 24B, with automatic cover
-Hoods/housings STD type, sizes 6B, reversed single locking system (1 lever)
-Hoods/housings STD and STD-HV with central locking lever
-Hoods/housings STD and STD-HV types sizes 10B, 16B, 24B, 32B double locking system (2 levers)
-Hoods/housings STD and STD-HV types sizes 10B, 16B, 24B, with double cable entry with 4 pegs for 2 levers
-Hoods/housings STD and STD-HV types sizes 10B, 16B, 24B, reversed double locking system (2 levers)
-Hoods/housings HE type, for harsh environmental requirements, size 10A, 16A, 32A
-Hoods/housings HE type, for harsh environmental requirements, size 6B,10B, 16B, 24B, 32B, 48B single locking system (1 lever)
-Hoods/housings HE and HE-HV type, for harsh environmental, with central locking lever, size 10B, 16B, 24B
-Hoods/housings HE and HE-HV type, for harsh environmental requirements, 2 levers, size 10B, 16B, 24B, 32B
-Hoods/housings HE and HE-HV type, for harsh environmental, with reversed double locking system, 2 levers, size 10B, 16B, 24B, 32B
-Hoods/housings EMC type, for EMC applications
-Hoods/housings, STD, HE, EMC type for S-QD inserts, size 32x13
Advantages : Range Available :
ROHS Compliance :
1) Designed and tested in accordance with the latestinternational standards
2) Suitable for the worldwide market it conforms withboth European and American Standard Systems
3) Innovative Italian Design with ergonomic round shape
4) Captive screws
5) Wire protectors in stainless steel. Contact screws in steel or stainless steel on request.
6) For metal enclosures we use only monoblock metal levers for anti-ageing and no breaks.
7) Riveted pegs in stainless steel on hoods, housingsand covers to avoid corrosion, breaking and losing ofIP protection(I)
8) High construction hoods for IP66 cable glands anddedicated type for IP68 cable glands for space saving.
9) Wide range of cable glands and accessories for better performances, easy assembling & cost reduction.
10) Fully compatible(II)
11) RoHS compliant
12) Special versions on demand
13) Enclosures for harsh environmental requirements with special resistance at industrial washing
14) EMC enclosures with special finishing
(I) Integrated pegs in the casting of the enclosures may become a source of weakness due to the material itself(aluminum alloy) and to corrosion when lockedby the levers made with different materials. In fact the coating applied on the enclosures and on the integratedpegs easily disappears due to the high pressure applied during the locking and unlocking operations. With humidity, water and other liquids present in the industrial environment, the direct contact between metals with different electrochemical potential will cause corrosion, breaking, malfunctions and the losingof the IP protection degree.
(II) We guarantee the best performance and the precise conformity with the standards when westec inserts, enclosures and cable glands are used.
The products are in accordance with the European
Directive 2002/95/EC and its amendments Directive
2008/35/EC on the use of certain hazardous
substances in electrical and electronic equipments
(ROHS)
Multipole Industrial Connectors from
Global solutions made easy
sales@ keascontrols.com | [email protected]
Cables, systems and more... from
Flexible Control Cables
Electronic cables,telecommunication cables
and wiresfor intrinsically safe systems
Electronic cablesELITRONIC LIYY, ELITRONIC-CY LIYCY
® ®PAARTRONIC LIYY (TP), PAARTRONIC -CY LIYCY (TP) ®PAARTRONIC -CY-CY LIYCY-CY (TP) pair and overall
shielded
Halogen-free electronic and computer cables ELITRONIC-H LIHH, ELITRONIC-CH LIHCH
®PAARTRONIC -H LIHH (TP),®PAARTRONIC -CH LIHCH (TP)
Electronic and control cables for intrinsically safe systemsELITRONIC-OZ LIYY-OZ EB ELITRONIC-OZ-CY LIYCY-OZ EB
Approved electronic cablesELITRONIC LIYY UL/CSA, ELITRONIC-CY LIYCY UL/CSA
® PAARTRONIC LIYY (TP) UL/CSA,® ®PAARTRONIC -CY LIYCY (TP) UL/CSA DATATRONIC -CY UL
Low-capacitance data cablesDATEX-CY Li2YCY (TP), DATEX-CYv + UV Li2YCYv (TP), DATEX-PIMF-CY Li2YCY-PIMF
Hook up and installation cablesJE-Y(ST)Y Bd, JE-LIYCY Bd, RD-Y(ST)Y Bd
Halogen-free installation cablesJE-H(ST)H Bd, JE-H(ST)H Bd FE180 E30-E90, JE-H(ST)HRH Bd FE180 E30-E90 BMK,JE-LIHCH Bd, RD-H(ST)H Bd
Instrumentation cablesRE-2X(ST)Yv PV-af, RE-2X(ST)Yv PIMF PV-2afRE-2X(ST)2Y(Z)Y PPOV-af, RE-2X(ST)2Y(Z)Y PIMF PPOV-2af,RE-2X(ST)2YbY PPDV-af, RE-2X(ST)2YbY PIMF PPDV-2afRE-2X(ST)2YMYbY PIMF PPLVDV-2af
Telecommunication cablesJ-YY Bd, J-Y(St)Y Lg, J-2Y(St)Y St III Bd, J-H(ST)H BdA-2Y(L)2Y St III Bd, A-2YF(L)2Y St III Bd
BUS-, LAN-, Koax-, Video-cablesand system flat ribbon cables
Cables for INTERBUS systemsINTERBUS and INTERBUS HYBRID (RBC) / /NBC) fornormal requirements, for laying underground and drag chain applications
® Cables for PROFIBUS systems® ® ®(e.g. SUCOnet P , Modulink P , VariNET-P ,
® Siemens L2-DP, F.I.P. -Feldbus)® ® PROFIBUS L2-D 100 120 Ω, PROFIBUS PVC 150 Ω, ® ® PROFIBUS 2462 C-PE 150 Ω, PROFIBUS 2474 C-PVC
100 Ω for flexible applications, fixed laying, laying under- ground,for drag chain applications and for intrinsically systems
Cables for other BUS-systemsSAFETY-BUS C-H triple cores, AS-Interface TPE/G -
® single pair, ETHERNET H CAT5 100 MBit/s 2 and 4 pairs,
CAN-Bus for normal requirements an drag chainapplications DeviceNet H/PVC/PUR Trunk & Drop CableHybrid, for fixed laying and for drag chain applications EIB ST-PVC two pairs / Hybrid for fixed laying
LANLAN-Cable CAT.5, CAT.6, CAT.7
Coaxial cables(also available as multiple coaxial cables)RG Coaxial-Cable 50/75/95 Ω, HF Koaxial-Cable 50 Ω,Video Coaxial-Cable 75 Ω, Special Coaxial-Cable 50/75/95/120 Ω, RGB Coaxial-Cable
System flat ribbon cables with UL approvalSystem flat ribbon cable FBL UL grey with marking and coloured, Rounded system flat ribbon cable, UL
PVC-control cablesÖPVC-JB/OB, ÖPVC-JZ/OZUnshielded, shielded or steel wire braidedÖPVC-JZ/OZ 0,6/1KV black, also shielded2YSL(St)CY-J 0,6/1KV EMV2YSL(St)CY-J 0,6/1KV EMV-3 PLUSboth types also UV-resistant
Harmonised control cables H05VV5-F, H05VVC4V5-K Multinorm H05VV5-F HAR/UL/CSA,Multinorm-CY H05VVC4V5-K HAR/UL/CSA2-Norm (H)05VV5-F UL/CSA2-Norm-CY (H)05VVC4V5-K UL/CSA
Halogen-free control cablesFLAME-JZ/OZ-H FRNC, FLAME-JZ/OZ-CH FRNC FLAME-JZ/OZ-Hö FRNC oil-resistantFLAME-JZ/OZ-CHö FRNC oil-resistant
PUR-control cables, cables for hand-held machineryPUR (N)YMH11YÖ GREY/YELLOW, H05BQ-F, H07BQ-F
Special single coresHighflex LiFY, ESUY
Cables for photovoltaicsSOLAIRFLEX-150H FRNC+UV 0,6/1 kV
Data transmission cables,
resistant to oil and petrol
A-Y(ST)YÖ
Cables for probes and limiting value transmitters,
resistant to oil and petrol
Coaxial-Cable RG 59 blue
LIYCYÖ, LI2YCYVÖ-OBX,
LIY(ST)YÖ, LI2Y(ST)YÖ, RE-2Y(ST)YÖ
High voltage cables, resistant to oil and petrol(N)YYÖ
Cables for usein petrol stations
Global solutions made easy
sales@ keascontrols.com | [email protected]
Cables, systems and more... from
System Oriented Cables
Cables for servo-drives 0,6/1 kV® KAWEFLEX 4210 SK for drag chain applications, for
normal requirements® KAWEFLEX 4270 for fixed and flexible laying
Cables for servo-drives 0,6/1 kV with UL/CSA-approval according to SIEMENS or Bosch Rexroth standard
® KAWEFLEX 5221 5225, 5251, 5255, 5281, 5285,5290 SK 4 supply cores, resp. 4 supply cores + shieldedcores or pairs for brake and temperature also low capacitance types. All types for drag chain applications,for high requirements5290 SK for extreme speed and acceleration
Electronic-, Video- and Signal cables, shielded® KAWEFLEX 43xx
For flexible and fixed laying® KAWEFLEX 44xx SK
For drag chain applications, for high requirements
Electronic-, Video- and Signal cables,shielded with UL/CSA approval
® KAWEFLEX 54xx SK-C-PUR-cUL also according to SIEMENS Standard, for drag chain applications, forhigh requirements
Crane, conveyor and lift cables
PVC flat cablesH05VVH6-F, (H)05VVH6-F, H07VVH6-F, (H)07VVH6-F
PVC special flat cables, unshielded and shielded YFLY, KYFLY, YCFLY, YFLCY, KYCFLY, KYFLCY (EMC) H05VVD3H6-F, KYFLTY, KYFLTFY, KYCFLTY, KYFLTCY (EMC)
Polychloropren (Neoprene®) Flat cablesNGFLGÖU, (N)GFLGÖU, M(StD)HÖU, MCHÖU (EMC)
Halogen-free flat cablesLSOH, (H)05Z1Z1H6-F
PVC lift cablesKYSTY, KYSTUY, YSSTY, YSSTCY, YSSTVCY KYSSTUY, KYSTCY, KYSTCUY, KYSTFUY
Halogen-free lift cablesKHSTUH, K12YSTU11Y, K12YSTCU11Y, K2YSTU11Y, K12YSTFU11Y
PVC control cables with and without supporting elementYMHY-KT, YMHY-KST, YMHY-K, YMHYCY-KT (EMV), FYMYTW
Polychloropren (Neoprene®) control cables with supporting elementsFLGÖU, STN, STCN (EMC)
Reelable cablesTROMMELFLEX PUR-HF, TROMMELFLEX (K) NSHTÖU-J,
® (N)SHTÖU-J CORDAFLEX (SMK) (N)SHTÖU-J,TROMMELFLEX (N)SHTÖU-J UL
Cables for basket use® ®SPREADERFLEX YSLTÖ, BASKETHEAVYFLEX
Trailing cables 1-30 kV(N)TSCGEWÖU (SMK), (N)TSKCGEWÖU (SMK)LWL (N)TSCGECWÖU, (N)TSCGECWÖU LWL
Round Rubber cables for cable trolley systems ®FESTOONFLEX PUR-HF (N)GRDGÖU RONDOFLEX ,
® (N)GRDGCGÖU RONDOFLEX (C)-FC
Battery charge cableWYBLYK
Cables for use in drag chains, robot cables
(also with UL/CSA approval)
Control cables for use in drag chains® KAWEFLEX 3110, 3120, 3130, 3210, 3220, 3225,
3230 SK shielded and unshielded,for normal, increased and high requirements
Control cables for use in drag chains with UL/CSA-approval
® KAWEFLEX 5110, 5115, 5130, 5210, 5215, 5230 SK shielded and unshielded, for normal, increased and high requirements
Robot cables for use under torsional stress® KAWEFLEX 3510 und 3520 ROB
shielded and unshielded for torsional stress
Drag chain electronic cables® KAWEFLEX 3310, 3320, 3330, 3335, 3340, 3325 SK
shielded and unshielded, for normal, increased and high requirements
Drag chain electronic cables with UL/CSA approval® KAWEFLEX 5330, 5340 SK shielded and unshielded,
for normal and high requirements
Cables for Cleanrooms® KAWEFLEX 3131, 3231, 3321, 3341 CLEANLINE
shielded and unshielded, for high requirements
Fiber optic cablesTwenopto Glass fiber and fiber optic cables
Global solutions made easy
sales@ keascontrols.com | [email protected]
Cables, systems and more... from
Shaft lighting,Fastening material,AccessoriesShaft lighting / Fastening material / Accessoires
Suspension clamps and fastening material for flat and round cables
Mounting plates, Fastening material, Shaft lighting
Spiral cables and ready made cable assemblies ® KAWEFLEX Spiral cable PVC, Neoprene, PUR,
unshielded, shielded
Railroad cablesTwenkarailRailroad, communications and signaling cables
Cables and wiresfor fixed installation
Rubber-Sheathed cables
PVC-insulated wiresLIYvz, H05V-U/-K, H07V-U/-K/-R
PVC-insulated wires with UL/CSA approvalMultinorm H05V-K, H07V-K HAR/UL/CSA, wire UL/CSA
Halogen-free single coresLIHvz, H05Z-U/-K, H07Z-U/-K/-R
Shielded single coresELITRONIC-CY LIYCY
Installation cableNYM
Halogen-free installation cablesNHXMH
High voltage cablesNYY 0,6/1 kV, NYCY 0,6/1 kV, NYCWY 0,6/1 kV
Heat resistant cables and compensating cables
Spiral cables and ready made
cable assemblies
Heat resistant PVC cablesfor temperatures up to +105°CTHERM-105-EA, THERM-105, THERM-105+C
EVA-insulated cablesfor temperatures up to +120°CH05/07G-K
®TEFZEL -insulated cablesfor temperatures up to +150°CTHERM-145-EA, THERM-145, THERM-145+C
Silicone-insulated cablesfor temperatures up to +180°CSiD; SiD/GL; SiF; SiF/GL; SiFF; SiFv; SiZZKSi ignition cable, HZLSi high voltage ignition cable,SiL neon cableSIHF-J, SIHF-J+C, SIHF-J/GLP, H05SS-F, H05SST-F
TEFLON®-insulated cablesfor temperatures up to +205°C/ +260°CTHERM-205-FEP-EA, THERM-205-FEP, THERM-205-FEP+C, THERM-205-FEP/GL, THERM-205-FEP/GLP, THERM-260-PTFE-EA, THERM-260-PTFE, THERM-260-PTFE+CTHERM-260-PTFE/GL, THERM-260-PTFE/GLP
Special-insulated cablesfor temperatures over +260°CTHERM-350-GLI/GL-EA, THERM-350-GLH/GL, THERM-350-GLH/GLPTHERM-1250-GLI/GA-EA, THERM-1250-GLIGAHGLI/GAP THERM-1550-FLAME
Light and middle rubber-sheathed flexible cablesH05RR-F/H05RN-F
Heavy rubber-sheathed cablesH07RN-F, A07RN-F, H07ZZ-F, NSSHÖU
Welding cablesH01N2-D, H01N2-E
Special rubber coresNSGAFÖU
Cables for permanent use in water TML N-RD for industrial water, round, TML N-F for industrial water, flatTML T-RD for drinking water, round,TML T-F for drinking water, flat
Ship and marine cablesTwenkashipTKF halogen-free marine cables
Global solutions made easy
sales@ keascontrols.com | [email protected]
Cable Trolley System from
Cable trolley system for carrying electric cables
Cable trolley system for track K-100
Cable Holders
Product Range :
Cable Trolleys for both flat cables and round cables.
Cable trolley without cable holder KVLP-100I End clamp KVLK-100
Towing trolley KV-100 Cable trolley metal body KVL-40
Cable holder, hose 8 – 15 mm, model A
Cable holder, hose 16 – 24 mm, model B
Cable holder, hose 25 - 35 mm, model C
Track K-100
Global solutions made easy
sales@ keascontrols.com | [email protected]
Kolibri
PKK
PLE
SLE
Energy Drag Chain from
Dimensionsbending radii: 15 to 300 mminner height: 7 to 50 mminner width: 7 to 205 mmweight: 0,06 to 2,7 kg/m
Special variantsELTOLA ... silent runningALLROUND ... all movementsATEX ... EX-protectionESD ... antistaticV-0 ... self extinguishing
Temperatue : -20°C to +100°C.
DimensionsBending radii: 40 to 500 mmInner height: 16 to 80 mmInner width: 30 to 300 mmEnergy chain weight: 0.6 to 3.4 kg / m
Temperature : -20 ° C to + 100 ° C.
Special versionsELTOLA ... silent runningALLROUND ... all movementsATEX ... EX-protectionESD ... antistaticV-0 ... self extinguishing
Applications : robotics, handling equipment, machine tools,textile machinery
Applications : robotics, handling, transportation, paper production,textile industries, water plants
DimensionsBend radii: 75 to 750 mmInner height: 31 to 115 mmInner width: 50 to 1000 mmEnergy chain weight: 1,9 to 7,2 kg / m
Temperature : -20 ° C to +100 ° C.
Special versionsALLROUND ... all movementsATEX ... EX-protectionESD ... antistaticV-0 ... self extinguishing
Applications : Machine tools, Handling technology, Conveying and lifting equipment
DimensionsBending radius : 60 to 600 mmInterior height : 19 to 118 mmInterior width : 20 to 1000 mmEnergy chain weight : 2,2 to 25 kg / m
Temperature : -20 °C to + 600 °C(-40 ° C stainless steel to + 600 ° C).
Special typesStainless SteelCarburated (hardened)
Applications : machine tools, mills, special machinery, wood processing industry, conveying and lifting equipment
Global solutions made easy
sales@ keascontrols.com | [email protected]
Energy Drag Chain from
GKA
SFK
PFR
TROUGHS
DimensionsBend radius: 200 Inner height: 118 to 468 mmInner width: 100 to 1000 mmEnergy chain weight: 25 to 85 kg / m
DimensionsBend radius: 100 to 300Energy chain weight: 3,0 to 6,6 kg / m
DimensionsBend radius: 75 to 300Energy chain weight: 0,7 to 4,6 kg / m
Dimensionsweight: 3,5 to 0,004 kg / m
Temperature : -20 ° C to + 600 ° C ( stainlesssteel -40 ° C to + 600 ° C).
Applications : steel plant, water power plant, mechanical engineering
PKK 328trough angle height 200 mmconnector angle height 160 mm
Global solutions made easy
sales@ keascontrols.com | [email protected]
Cable Glands, Conduits... from
Cable Glands
PG Thread Cable Glands
Metric Thread Cable Glands
Spiral Cable Glands
Flat Type Cable Glands
Metal Cable Glands
Material : Polyamide 6Colour : RAL 7001 (Gray), RAL 7035 (L. Gray), RAL 9005 (Black)Protection Class : IP 68Permanent operational temp. : - 40 C to + 100 CShort term max. Operational temp. : +150 CSeal : Thermoplastic Rubber
° °°
Material : Polyamide 6Colour : RAL 7001 (Gray), RAL 7035 (L. Gray), RAL 9005 (Black)Protection Class : IP 68Permanent operational temp. : - 40 C to + 100 CShort term max. Operational temp. : +150 CSeal : Thermoplastic Rubber
° °°
Material : Polyamide 6Colour : RAL 7001 (Gray), RAL 7035 (L. Gray), RAL 9005 (Black)Protection Class : IP 68Permanent operational temp. : - 40 C to + 100 CShort term max. Operational temp. : +150 CSeal : Thermoplastic Rubber
° °°
Material : Polyamide 6Colour : RAL 7001 (Gray), RAL 7035 (L. Gray), RAL 9005 (Black)Protection Class : IP 68Permanent operational temp. : - 40 C to + 100 CShort term max. Operational temp. : +150 CSeal : Thermoplastic Rubber
° °°
Conduits
PG Spiral Polyamide Conduits
Metal Conduits
Split Conduits
Material : Polyamide Size : 7x10mm, 8.5x12mm, 10x13mm, 12x15.8mm,14.2x18.4mm, 16.5x21.2mm, 23.5x28.4mm, 29x 34.5mm,36x42.5mm, 48x54.5mmColour : Gray, Black Permanent operational temp. : - 40 C to + 120 CHalogen free
° °
Material : Polyamide Size : 7x12mm, 10x15.8mm, 14.2x21.2mm, 23.5x34.5mm,36x54.5mmColour : Gray, Black Permanent operational temp. : - 40 C to + 120 CHalogen free
° °
Material : GALVANIZE, SteelCover : PVC (POLYAVINIL CHLORIDE) HOLOGEN FREE & FLAME RESISTANTProtection Class : IP54 / IP65Permanent Operational Temp . : (-)10 C (+)70 CUsage Places : biulding's ceiling floor, plasterpan,underflooring systems,office applications, food and chemical sector instrument connections,securty systems, all industry foundations, all construction industry protection of machine, electric, electronic,instrument system, electric illumination systems
° °
Material : Brass, Nickel PlatedClamping Insert : Polyamide 6Seal : Thermoplastic RubberProtection Class : IP 68Temp. range : - 40 C to + 100 CO-ring : NBR
° °
Reducers
Metal Reducers
Material : BRASSCover : NICKEL PLATEDProtection Class : Ip55
Global solutions made easy
sales@ keascontrols.com | [email protected]
Conduit Glands
PG Thread Conduit Glands
Material : Polyamide 6Colour : RAL 7001 (Gray), RAL 7035 (L. Gray), RAL 9005 (Black)Permanent operational temp. : - 40 C to + 100 CShort term max. Operational temp. : +150 C
° °°
Conduit Glands
PG Thread Spiral Connectors
Metric Thread Spiral Connectors
Special Metric Thread Spiral Connectors
Cable Glands, Conduits... from
Material : Polyamide 6Colour : RAL 7001 (Gray),RAL 7035 (L. Gray),RAL 9005 (Black)Permanent operational temp. : - 40 C to + 100 CShort term max. Operational temp. : +150 C
° °°
Blind Stops
Metal Blind Stop
PG & Metric Blind Stop
Material : BRASS, NICKEL PLATEDAvailable from : PG 7 to PG 48
Lock Nuts
Metal Lock Nuts
Lock Nuts
Material : Brass, Nickel PlatedAvailable from : PG 7 to PG 48
Material : Polyamide 6+%30 Glass Fibre reinforcedColour : RAL 7001 (Gray), RAL 7035 (L. Gray), RAL 9005 (Black)Permanent operational temp. : - 40 C to + 120 CShort term max. Operational temp. : +150 C
° °°
Protection Class : Ip 67Colour : Gray, BlackHalogen free
Protection Class : Ip 67Colour : Gray, BlackHalogen free
Protection Class : Ip 67Colour : Gray, BlackHalogen free
sales@ keascontrols.com | [email protected]
Global solutions made easy
Terminals from
Front-entry rail-mounted terminal Blocks
Miniature rail-mounted terminal blocks
Rail-Mounted Terminal Blocks (Side-Entry)
WAGO X-COM® SYSTEM
®Rail-mounted terminal blocks with CAGE CLAMP connection. Whetther they are through,
ground (earth) conductor and shield (screen) terminal blocks, angled and horizontal type;
distribution, high-current and multilevel terminal blocks - we have the ideal terminal block
with front-entry wiring for any field.
CAGE CLAMP connection for DIN 15 and DIN 35 rails - ideal for tight spaces.
For more than 20 years, the WAGO rail-mounted side-entry terminal blocks
(as well as WAGO disconnect terminal blocks for test and measurement) ®with CAGE CLAMP connection technology, have been providing safe connections.
®Our possibilities - your benefits. The WAGO X-COM system ®The WAGO X-COM -SYSTEM, a fusion of connectors and rail-mounted terminal blocks, has grown to become a building block
for universal system wiring since being introduced onto the market in 1997. This system makes all current rail-mounted terminal block functionalities suitable for plug and play applications. Even components that are not mounted on a TS 35 carrier rail can be easily incorporated into existing system wiring using the X-COM-SYSTEM®.
There are X good reasons to use the WAGO X-COM®-SYSTEM: 3) More cost effective replacements of durable plugs. For all applications up to 500 V / 32 A / 4 mm². Using WAGO X-COM® can save you up to 60%!4) Simple planning and testing using a 1-pole female connector.5) Electronic groups can be directly integrated into the system wiring.6) Economize control cabinet production. Having pluggable connections in all application areas means saving costs through the use of pre-assembled components!7) Pluggable potential distribution for up to 6 potentials.8) Double deck terminal blocks save space.
Benefits: 1) 100 % protection against mismating and2) touch protection even when not assembled.
sales@ keascontrols.com | [email protected]
Global solutions made easy
Spring clamp termination systems
CAGE CLAMP is a unique, patented, stainless steel clamping mechanism designed to automatically connect solid or stranded wires. Various CAGE CLAMP sizes are available to accommodate wire sizes from 0.08 mm 2 35 mm. Other than stripping the wire, no special wire preparation such as crimps, ferrules or tinning is necessary. Most screwless systems offered by other manufacturers are based on the leaf-spring principle. This type of connection is found in the back of many electrical outlets. Leaf-spring is only recommended for larger, solid wire since it has no sides to contain the strands and because of the sharp angle in which the wire is contacted. Suitable for all copper conductors
1. Solid, 2. Stranded, 3. Flexible 4. Flexible with ferrule
Terminals from
WAGO - I/O - System
Automation Technology
Connectors - Multi Connection System
PCB Terminal Blocks
Installation technology
sales@ keascontrols.com | [email protected]
Global solutions made easy
PROFIBUSINTERBUSETHERNET TCP/IPDeviceNetCANopen
MODBUSLONWORKSII / O-LIGHTBUSCC - Link
Push-wire connectors for junction boxes, lighting connectorsWINSTA® connectors for building installation
Multi Connection System Micro - 100% Protected against Mismatching, Headers with Solder Pins; Male and Female Connectors with CAGE CLAMP, Pin Spacing 2,5 mm / 0.098
PCB Terminal Strips with CAGE CLAMP®Series 218, 233 and 234, pin spacing 2.5 mm5.08 mm and 7.5 mm
Rail-mounted terminal blocks withovervoltage protection
Rail-mounted terminal blocks withcoupler functions
COMPACT Rail-Mounted Terminal Blocks
Compact and versatile:
WAGO front-entry rail-mounted terminal blocks of series 870 ® with CAGE CLAMP DIN 15 and DIN 35 rails.
Remote Controllers from
Remote Controllers
67 Series Single Speed Wireless Controller
66 Series Dual Speed Wireless Controller
Features :Available from 24V to 230V ACSingle speed and Dual speed variants availableSimultaneous operation of up to 50 Devices without interferenceEasy plug-in interface provides quick and easy installation on existing cranesRugged industry design to provide precise operation, degree of protection Ip65Remote available in 8 and 12 buttons variant with key-lock and Emergency Push button
Highlights : Operating temperature -25 C - + 70 CImpact and temperature resistant housingLockable switch to prevent un-Authorized useImproved safety due to extended range, typically 150MHassle free operation, Resistant to Dust, Water, Oil, acids, alkaline, heat, and sunlightLess power consumption, 150 hours of continuous operation with just two “AA” Alkaline Cells
Features:
- Accurate in transmitting, receiving, decoding and controlling of all output relays.
- More than 150 hours of continuous operation with just two off-the-shelf “AA” alkaline batteries.
- Can cover up to 150 Meters distance between transmitter and receiver.
- Upto 50 wireless controllers can be installed in a single location.
- Light weight.
Features:
- Accurate in transmitting, receiving, decoding and controlling of all output relays.
- More than 150 hours of continuous operation with just two off-the-shelf “AA” alkaline batteries.
- Can cover up to 150 Meters distance between transmitter and receiver.
- Upto 50 wireless controllers can be installed in a single location.
- Light weight.
Specifications - Transmitter
Specifications - Transmitter
Specifications - Receiver
Specifications - Receiver
Frequency Range
Channel Spacing
Transmitting Range
Hamming Distance
Frequency Control
Transmitting Power
Operating Temperature
Source Voltage
Current Drain
Weight(approx.)
Degree of Protection
Frequency Range
Channel Spacing
Transmitting Range
Hamming Distance
Frequency Control
Transmitting Power
Operating Temperature
Source Voltage
Current Drain
Weight(approx.)
Degree of Protection
Modulation
Decoding Reference
Frequency Control
Sensitivity
Responding Time
Output Contact
Operating Temperature
Source Voltage
Power Consumption
Weight (approx.)
Degree of Protection
Modulation
Decoding Reference
Frequency Control
Sensitivity
Responding Time
Output Contact
Operating Temperature
Source Voltage
Power Consumption
Weight (approx.)
Degree of Protection
422 to 438 MHZ
25KHz
150 Meters
6
Quartz Crystal
0.3mW
-25°C ~ +70°C
3.0V (“AA” x 2)
10~18mA
220g.
IP 65
422 to 438 MHZ
25KHz
150 Meters
6
Quartz Crystal
0.3mW
-25°C ~ +70°C
3.0V (“AA” x 2)
10~18mA
300~320g.
IP 65
Narrow Band FM
Quartz Crystal
Synthesizer (PLL)
-120dBm
40mS
250V @ 10A
-25°C ~ +70°C
AC 24V ~ 230V available
7.7 Watts
835g.
IP 65
Narrow Band FM
Quartz Crystal
Synthesizer (PLL)
-120dBm
40mS
250V @ 10A
-25°C ~ +70°C
AC 24V ~ 230V available
7.7 Watts
835g.
IP 65
sales@ keascontrols.com | [email protected]
Global solutions made easy
Aluminum Boxes from
Aluminium enclosures with external mounting flanges
Aluminium enclosures for Industrial purpose
General technical characteristics and applications :
General technical characteristics and applications :
Metal enclosures for installation, circuit breaking, connection control of electric and electronic equipments.
For industries, automation, railways, navy, tunnels, parkings,industrial buildings
The enclosures are in conformance with the Low Voltage Directive 2006/95/EC, with EMC Directive 2004/108/EC where applicable and with the Standards:
EN 60670-1Boxes and enclosures for electrical accessories for household and similar fixed electrical insatllations. EN 60670-22Particular requirements for connecting boxes and enclosures.EN 62208Empty enclosures for low voltage switchgear and controlgear assemblies.NEMA 250National (USA) Electrical Manufacturers Association. Class (Type) of protection.
6 series are available :
1 - Standard with polyester powder coating grey RAL90062 - Standard with polyester powder coating grey RAL70353 - Standard with polyester powder coating grey RAL70374 - Sandblasted without coating5 - EMC series. Sandblasted without coating. Pls refer to note of page 18.066 - HE type for harsh environmental and for high temperature up to 230°C.Black RAL9005 with polyester powder coating
8 Sizes are available :from 90 x 90 x 53 mm, size 1 (S1) to 392 x 298 x 144 mm,size 7 (S7) Size S-3 with high cap (HC)
Protection degree according to EN 60529 : Ip66
Protection degree according to NEMA 250 : Type 4,4x,12,13Type 4x, with coated surfaces only
Working temperature : - 40°C to + 125°C
High mechanical strength and vibration resistance.
Captive screws
High protection against magnetic interferences
Anti-ageing materials, water resistant, oil resistant, grease resistant and fuel resistant.
Materials
- Body and Cover : Die Cast aluminium alloy- Colors : Type STD Grey RAL 9006,Type STD Grey RAL 7035, Type STD Grey RAL 7037, Type HE Black RAL 9005, Type sandblasted Al naural color EMC : Al naural color- Coating :- Polyester powder- Gaskets :- In anti-ageing, oils, greases and fuel resistant silicone- Screws :- Steel with Geomet® treatment to prevent corrosi on especially with aluminium parts- Steel zinc plated for screws used internally- Metal plates :- Steel zinc plated
Metal enclosures for installation, circuit breaking, connection and control of electric and electronic equipments.
For mechanical and electro mechanical industries, industrial automation, automotive, railways, navy, tunnels, parkings, industrial buildings
The enclosures are in conformance with the Low Voltage Directive 2006/95/EC, with EMC Directive 2004/108/EC where applicable and with the Standards:
EN 62208 : Empty enclosures for low voltage switchgear and controlgear assemblies
NEMA 250 : National (USA) Electrical Manufacturers Association. Class (Type) of protection.
DIN 40050-9 / ISO 20653 : Electrical equipments in road vehicles.Enclosures. Water test with high pressure. IP69K.
NEMA ICS5 : Food and beverage industries. High pressure power wash test procedure for self contained control-circuit devices.
High mechanical strength and vibration resistance.
Captive screws
High protection against magnetic interferences
Anti-ageing materials, water resistant, oil resistant, grease resistant and fuel resistant.
The enclosures can be mounted internally through holes
Inside the boxes the DIN rail or the metal plate can be assembled for mounting terminal blocks, breakers, fuse holders, control devices, transformers, electronic circuits, connectors, etc.
5 series are available:
1 - Standard with polyester powder coating grey RAL 70012 - Standard with polyester powder coating grey RAL 70353 - Standard sandblasted without coating.4 - EMC series. Sandblasted without coating. Pls refer to note of page 18.065 - HE type for harsh environmental and for high temperature up to 230°C.Black RAL 9005 with polyester powder coating
The enclosures HE series have the best performances of the enclosures HE series for the MICconnectors: These performances are listed on pages 18.05, 18.15 and 18.16 of this catalogue.
Protection degree according NEMA 250 : Type 4, 4x,12,13Type 4x, with coated surfaces only
Impact resistance EN 62262: IK 09
Working temperature: - 40°C to + 125°C
Max ambient temperature : 75°CAmbient temperature average value over 24h:60°C
Max relative humidity at 25°C : 100%Max relative humidity at 40°C: 50%
With ground terminal on box and on cover
Materials
- Metal body and cover: Die-cast aluminium alloy
- Coating : - Polyester powder coating- Gaskets:in anti-ageing, oil resistant and fuel resistant silicone- Screws:- Stainless steel
Global solutions made easy
sales@ keascontrols.com | [email protected] sales@ keascontrols.com | [email protected]
Accessories from
The bush terminals are convenient for connecting stranded wires to connector inserts and terminal blocks with screw terminals. They are in accordance with DIN 46228/4
Materials:Copper tin plated (insulation - PP)Colors in accordance DIN STD and French standard
For Single Conductor For Double Conductor
- Special hand tools for crimping of turned male and female contacts for wire size 0,14 to 6,0 mm (26-10AWG)- 4 concentric crimps by synchronized driven jaws.- micro setting up to 0,01 mm tolerance- Enclosed gauge ensures accurate calibration- Locator for exact positioning of 12 different contact types
Eight (4+4) indent crimping tool for crimping
in accordance with MIL - C - 225 20/1
Precision 8 indent crimping tool
Press Sleeves & Cable lugs Special Tools for conductors and cable assembly
Removal tool for inserts assembled onDIN rail (top support)
Economical crimping tool for turned contacts with ratchet:
For wire section 0,5 ÷ 6,0 mm²For contactDia 1.6 (10A)
- -
Insertion and removal tools for contacts die 1,6 and 2,5 mm
For crimp contacts Dia 1,6 mm (10A)
For inserts series S-D, S-DD, etc.
For crimp contacts Dia 2,5 mm (16A)
For inserts S-E, S-EE
Insertion tool for contacts dia 1,6 mm (10A)
For wires 0,14 - 1,5 mm² (26 - 16 AWG)
- For bush terminals- Automatic self adjustment- Hexagonal crimp profile with six serrated crimp surfaces made by 6 synchronously driven crimp jaws- Cross-section range from 0,08 to 6,0 mm- Ergonomic design
- For bush terminals- Automatic self adjustment- Square crimp profile resulting from synchronously driven crimp jaws- To be used for ranges of 0,08 to 10,0 mm²
- For bush terminals- Automatic self adjustment- For convenient handling in areas difficult to reach- Square crimp profile showing four serrated crimp surfaces- Cross-section range from 0,08 to 16,0 mm- With ratchet
Profesional crimping tool
Crimping toggle press
Features -- For small-lot production - Designed to match all series of crimping dies, locators and wire stops used with manual tool (please see previous pages). - Operational height and working stroke same as with manual crimping tool - Fine adjustment of crimping height by 0,01 mm by means of an adjusting nut at the press ram - Forced locking system for reliable crimping (emergency release provided) - Crimping dies and accessories easily exchangeable - Size 150 x x256 mm - Weight 24 Kg
Feature -- Small but robust pneumatic crimping machine with a crimping force of 25kN - Also particularly suitable for small series production due to easy resetting of machine - Parallel movement of crimping jaws - Guarantee exact crimped connections - Compatible with all crimping dies and locators of the crimp system of manual crimping tools (please see previous pages) - Vast variety of applications due to the possibility of adjusting different working strokes (< 6 mm. and > 6 to 14 mm.) - Observing the relevant safety standards - Convenient hadling by 360° rotating die accomodation system for both left- and right handed users - Optimal repeatable crimping results by a special driving mechanism - Maintenance-free operation - Crimping applications: 0,08 to 50 mm² (35 and 50 mm² for ferrules only) - Operating pressure: 5 ÷ 10 bar - Compressed air requirements: 0,75 l/ working stroke - Crimp force: 25 kN - Size 325 x 500 x280 mm - Weight 30 Kg
MODEL GW25KN
MODEL GW12KN
sales@ keascontrols.com | [email protected] sales@ keascontrols.com | [email protected]
Global solutions made easy
sales@ keascontrols.com | [email protected] sales@ keascontrols.com | [email protected]
Global solutions made easy
Cable gland for ribbon cable from
IP67 Plastic cable gland for ribbon cable
Westec cable glands allow therefore the use, the locking and the IP66 / IP69K protection of ribbon cables in the
assembly with waterproof housings and junction boxes or in other applications with same demands.
The special design of the clamping die, of the sealing and of the rubber gasket, ensure the performance of this
product that is waterproof, dustproof and has a high resitance to salt, acid, alkali, alcohol, grease and general
solvents. The use of Westec cable gland for ribbon cables gives an optimal protection of the assembly and
extends the cable life.
Different cable glands are available to fit a range of dimensions of the ribbon cables that goes from 3.8 mm to
5.7 mm of thickess and from 18 mm to 76 mm width.The cable glands for ribbon cable represent a news on the market as no other product with similar
characteristics is currently available. Westec patented this product.
For the applications requiring the connection of ribbon cables to the Heavy Duty Connectors of Westec range,
the hoods in STD, HE and EMC version, complete of cable glands are now available.
Applications with Plastic or metal enclosures
On hoods for MIC connectors
Applications with multipole connectors MIC hood / housing
sales@ keascontrols.com | [email protected] sales@ keascontrols.com | [email protected]
Global solutions made easy
Power and data interfaces from
The Westec interfaces allow an easy connection of the machine or of the equipment to external devices such as
notebooks, diagnosis units, etc and also offer, in the case of need, a power supply socket for the same devices. The
interfaces are sutable for standard industrial application (STD), for harsh environment application (HE), and for
electromagnetic compatibility application (EMC). Offer a protection degree IP66/IP69K with cover duly locked by its
lever.
Our interfaces are composed of a diecast Aluminium hood/housing with cover of the same series used for Westec heavy duty connectors, that assure the mechanical strength necessary for the industrial application. Are available with one or two closing levers and are composed of a frame that contains a series of modules with the different power sockets or a wide range of data transmission connectors. The data transmission interfaces use a series of couplers that allow the connection with cables already assembled on both sides: any soldering, crimping or any other assembly operation is therefore not necessary for the connection of the external devices through Westec interface system. In our catalogue you can find the most common international power supply sockets and the most used data transmission couplers such as the USB, the RJ45, the D-Sub, etc.A blank frame for the assembly of different kind of connectors or power supply sockets is also available. Westec offers on demand, the interfaces hood/housing in grey colour RAL 7035, often used for the cabinets and control boards for machines and industrial installation.We also recommend the purchase of the connection cables manufactured by Westec, due to the particular technical characteristics for the industrial and professional use.
Power interface GERMANY (VDE) 2p+
Power interface USA / JAPAN 2P+ x 2
Power interface ITALY 2P+ x 2
Power interface FRANCE 2P+
Power interface GREAT BRITAIN 2P+
Power interface AUSTRALIA / CHINA 2P+
Power interface SWITZERLAND 2P+ x 2
Power interface EURO / USA 2P+ x 2
Power interface GERMANY + ITALY 10/16A 2P+ x 2
Data interface D-SUB 9 F-F
Data interface D-SUB 25 F-M
Data interface D-SUB 9 F-M x 2
Data interface D-SUB 25 F-M x 2
Data interface D-SUB 25 F-M + D-SUB 9 F-M
Data interface USB A 2.0 F-F x 2
Data interface RJ45 shielded F-F x 2
Data interface RJ45 F-F, D-SUB 9 F-F, D-SUB 9 M-M
Data interface RJ45 F-F, D-SUB 9 F-M, USB A 2.0 F-F
Data interface RJ45 F-F, D-SUB 25 F-M, USB A 2.0 F-F
Data interface RJ45 F-F, D-SUB 25 F-M, D-SUB 9 F-M
Modular Power and data connecting interfaces
sales@ keascontrols.com | [email protected] sales@ keascontrols.com | [email protected]
Global solutions made easy
Top Support Assembly
DIN rail support for inserts size B from
Base support assembly
Complete set assembly
This mounting rail system allows you to mount the multipolarconnectors inserts on the rail inside the control cabinets.
- No tools are needed and contact inserts are simply snapped in place as well as the support on the rail.
- Labelling surfaces on the product allow for clear equipment identification.
- For assembling on rail 35x7,5 and 35x15 in accordance with DIN En60715.
- The support enables users to arrange a maximum number of connections in a minimum area within the control cabniet.
- Quick locking of the male with female inserts through levers.
- Fully compatible: it allows to accept inserts with same sizes notmanufactured by Westec.
- The inserts can be assembled also with code pins, Part No. 7000.6875.0/7000.6875.3 male code pin.
Advantages
Application : For all inserts, size : 6B <<44x27>> 10B <<57x27>> 16B <<77x27>> 24B <<104x27>>
For inserts series : S-D, S-DD, S-E, S-EE, S-EHV, S-ES, S-EP, S-ESHV, S-HSB, S-K, S-M
Material : Polycarbonate
Color : Grey - RAL 7044
Flammability : UL-94 V0
DIN rail mounted connectors
fast assembly
label (optional)
label (optional)
click in assembly
click in assembly cable tie fastening
Delighted Customers Worldwide
Regional Offices Branch Offices
KEAS Control Systems India Private Limited3rd Floor, Singapore Plaza, 333, Cross Cut Road,Gandhipuram, Coimbatore - 641 012.
Phone : +91 422 4297601 - 610(10 Lines), Fax : 91 422 4297611E-mail : [email protected], website :www.keascontrols.com
Corporate and Head Office
Ahmedabad -
Bangalore -
Chennai -
Hyderabad -
Mobile No: +91 9925036875
Mobile No: +91 9620777719
Mobile No: +91 9600990218
Mobile No: +91 8106765093
Kolkata -
Mumbai -
Pune -
Mobile No: +91 9804169185
Mobile No: +91 9167063560
Mobile No: +91 8956711388
Hosur -
Trichy -
Mobile No: +91 9952410192
Mobile No: +91 9952433492
Note: The logos featured above are the logos of the respective companies and KEAS is involved with thesecompanies by providing services either directly or indirectly.