Upload
ravi-kant
View
227
Download
0
Embed Size (px)
Citation preview
8/18/2019 Training Pd Blowers [Compatibility Mode]
1/69
TRAINING ON PD BLOWERSTRAINING ON PD BLOWERS
8/18/2019 Training Pd Blowers [Compatibility Mode]
2/69
HISTORY OF HIBON
Since October 2006 the Hibon brand is part of Ingersol lRand Industrial technologies2008-IR INDIA starts manufacture of air blowers
PD Blowers2
-
8/18/2019 Training Pd Blowers [Compatibility Mode]
3/69
What is a Blower?What is a Blower?
, ,
displacing gas (mainly air)
Standard air blower range
• Typically operate between – 500 mbar gauge and1 bar gauge pressure
• Typically delivers air/gas directly to process (no
PD Blowers3
8/18/2019 Training Pd Blowers [Compatibility Mode]
4/69
Screw compressor
PD Blower Multistage centrifugal
PD Blowers4
8/18/2019 Training Pd Blowers [Compatibility Mode]
5/69
LobeLobe--style PD Blowerstyle PD Blower
Principle of Operation
Two profiled rotors counter-rotate in a machined housing with close-tolerances.Each rotation of the rotor set displaces a fixed volume of air from inlet to outlet.
PD Blowers5
,
from) the process to which it is connected.
8/18/2019 Training Pd Blowers [Compatibility Mode]
6/69
Operating principle
The top rotor confines a volume of gas on the suction side
PD Blowers6
8/18/2019 Training Pd Blowers [Compatibility Mode]
7/69
Operating principle
The top rotor confines a volume of gas which is isolated from the suction and delivery
PD Blowers7
8/18/2019 Training Pd Blowers [Compatibility Mode]
8/69
Operating principle
This is a VOLUMETRIC machine with no internal compression
PD Blowers8
8/18/2019 Training Pd Blowers [Compatibility Mode]
9/69
Operating principle
The rotors, synchronized by the pinions, turn in the opposite direction:
1. without any contact between them
2. without any contact with the fixed parts
.
PD Blowers9
8/18/2019 Training Pd Blowers [Compatibility Mode]
10/69
Driven Rotorrunning in anticlockwise
direction dueto timinggears.
InletDischarge
Driver Rotor runningin Clockwisedirection
PD Blowers10
8/18/2019 Training Pd Blowers [Compatibility Mode]
11/69
Driven Rotor
trapping the Volume“ B” betweenhousing & i tself
Driver RotorDelivering theVolume “ A”gas to Driver Rotor
PD Blowers11
Discharge
8/18/2019 Training Pd Blowers [Compatibility Mode]
12/69
Operating Principle
off volume “ B”between Inlet &Discharge. Volume“ ”Condition
PD Blowers12
8/18/2019 Training Pd Blowers [Compatibility Mode]
13/69
Volume “ B” isdischarged by driven
Operating Principle
.
Driver rotor is
trapping the Volume“A”
PD Blowers13
8/18/2019 Training Pd Blowers [Compatibility Mode]
14/69
8/18/2019 Training Pd Blowers [Compatibility Mode]
15/69
Characteristics
Cubic capacity: This is expressed in l/revolution (litres per revolution)
This volume, for 1 revolution of the Blower drive shaft, is equal to
the following:
For the bi-lobes : to the green surface x length of the Stator x 4
For the tri-lobes : to the green surface x length of the Stator x 6
PD Blowers15
8/18/2019 Training Pd Blowers [Compatibility Mode]
16/69
Characteristics
Volume generated : Qve expressed in m3/min.
Qve in m3/min. = Cubic capacity in m3 x Speed in rpm.
The speed to be taken into consideration is the exact speed of the
shaft end under operating conditions.
The cubic capacity has to be converted from litres to m3.
PD Blowers16
8/18/2019 Training Pd Blowers [Compatibility Mode]
17/69
Characteristics
Power absorbed: Pabs is expressed in kW.
This is the product of the volume generated withwhich is the difference in pressure between the suction and delivery flanges.
p∆
Pabs in kW = Qve x p∆
Torque = Power / Speed
For a Blower:
=ve
Torque = Cubic capacity x Speed xSpeed
p∆
PD Blowers17Torque = Cubic capacity x p∆
8/18/2019 Training Pd Blowers [Compatibility Mode]
18/69
Characteristics
Heating : is expressed in °C.
Pabs°
Cp x xQv ω
abs
Qv = Flow rate drawn in, in m3/min.
= Specific weight of the gas on suction
Cp = Specific heat of the gas on suction (0.24 for air)
ω
is the heating between the suction and delivery flanges.t ∆
,
added to the .t ∆
PD Blowers18
8/18/2019 Training Pd Blowers [Compatibility Mode]
19/69
Consequences on behaviour
SNH
If the pressure remains constant and the speed changes:
.ambient air at 20 C.
At a speed of: 1500 rpm 3000 rpm
Actual flow rate: 7 20 m3/min. 17 m3/min.
Abs. power: 12.75 kW. 25.5 kW.Heating: 47°C. 40°C.
Delivery temperature: 67 C. 60 C.
PD Blowers19
8/18/2019 Training Pd Blowers [Compatibility Mode]
20/69
8/18/2019 Training Pd Blowers [Compatibility Mode]
21/69
Consequences on behaviour
When the Blower creates a VACUUM or PRESSURE:
Example: an SNH 6 that operates at a of 0.4 bars, at a speed of 1500 rpm and that sucks in airat 20°C
Under: Pressure Vacuum
p∆
Actual flow rate: 7.20 m3/min. 6.46 m3/min. Abs. power: 12.75 kW. 12.75 kW.Heating: 47°C. 87°C.Deliver tem erature: 67 C. 107 C.
PD Blowers21
8/18/2019 Training Pd Blowers [Compatibility Mode]
22/69
Consequences on behaviour
SNH
The difference in temperature between operation under VACUUM and operation under PRESSUREis due to:
The lower the weight, the greater the heating.
PD Blowers22
8/18/2019 Training Pd Blowers [Compatibility Mode]
23/69
Consequences on behaviour
SNH
The Blower has a suction filter that clogs up:
Exam le: an SNH 6 that o erates at a deliver ressure of 1 bar at a s eed of 2500 r m and that sucks in ambient air at 20 C
With a: Clean filter (no vacuum) Dirty filter (0.1b vacuum) Actual flow rate: 12.33 m3/min. 11.80 m3/min.
. . . . .Heating: 116°C 147°C.Delivery temperature: 136°C. 167 C.
PD Blowers23
.
8/18/2019 Training Pd Blowers [Compatibility Mode]
24/69
Consequences on behaviour
SNH
The soiling or clogging-up of a filter may cause the complete destruction of a Blower.
PD Blowers24
8/18/2019 Training Pd Blowers [Compatibility Mode]
25/69
Operating clearances
THE 3 TYPES OF CLEARANCES
Clearances between stator and rotors
1 Lateral clearances2
Clearances between rotors3
PD Blowers25
8/18/2019 Training Pd Blowers [Compatibility Mode]
26/69
Characteristics
There is no internal compression but a simple transfer of gas from suction to delivery.
The Blower does not make any pressure or any vacuum.
It is the load losses (restriction to flow) that create the pressure or
.
As there is no contact in the com ression chamber, there is no lubrication
needed in that chamber
Therefore this type of Blower has no traces of oil or lubricant in the
com ression chamber.
PD Blowers26
8/18/2019 Training Pd Blowers [Compatibility Mode]
27/69
LobeLobe--style PD Blower style PD Blower
•Constant Volume - Variable Pressure
S2H bi lobe SNV/SNH three lobe
PD Blowers27
8/18/2019 Training Pd Blowers [Compatibility Mode]
28/69
LobeLobe--style PD Blower style PD Blower
The ROTORS can be:
2 lobes 3 lobes
PD Blowers28
8/18/2019 Training Pd Blowers [Compatibility Mode]
29/69
S2H TwoS2H Two--Lobe PD Blower Lobe PD Blower
• 6 types available
• Pressure to 700 mbar Gauge maxi• Vacuum to – 500 mbar Gauge
PD Blowers29
8/18/2019 Training Pd Blowers [Compatibility Mode]
30/69
S2H TwoS2H Two--Lobe PD Blower Lobe PD Blower
PD Blowers30
8/18/2019 Training Pd Blowers [Compatibility Mode]
31/69
SN ThreeSN Three--Lobe PD Blower Lobe PD Blower
• ypes ava a e• Flow up to 11 000 m3/h
• Pressure to 1.1 barg
• acuum o – m arg
• Dedicated to pressure > 600 mbarg(any flow) and flow above 800 m3/h
any pressure
• Combination of three lobes and pulsation
damper reduce the noise
SNV = vertical mounting, horizontal flow
SNH = Horizontal mounting, vertical flow
PD Blowers31
8/18/2019 Training Pd Blowers [Compatibility Mode]
32/69
SN ThreeSN Three--Lobe PD Blower Lobe PD Blower
PD Blowers32
8/18/2019 Training Pd Blowers [Compatibility Mode]
33/69
COMPONENTS
A Stator in which rotors turn, comprising of connecting flanges that often has fasteningplugs or positions to fix them.
PD Blowers33
8/18/2019 Training Pd Blowers [Compatibility Mode]
34/69
COMPONENTS
The Stator is generally made of grey cast ironBut it can be made of:
.
2. Different shades of stainless steel
3. Bronze
4. aluminium or aluminium bronze. , ,
epoxy polyurethane, kanigen
PD Blowers34
8/18/2019 Training Pd Blowers [Compatibility Mode]
35/69
COMPONENTS
PLATES
That close the sides o the stator.
That take the sealing systems.
at ta e t e shaft guide bearings .
PD Blowers35
8/18/2019 Training Pd Blowers [Compatibility Mode]
36/69
COMPONENTS
The Plates are generally made of grey cast iron
But it can be made of:1. GS or alloyed iron
2. Different shades of stainless steel
3. Bronze
4. Aluminium or aluminium bronze
5. For special applications, coated in molybdenum,
epoxy polyurethane, kanigen
PD Blowers36
8/18/2019 Training Pd Blowers [Compatibility Mode]
37/69
COMPONENTS
a e o
the rotors
PD Blowers37
CO O S
8/18/2019 Training Pd Blowers [Compatibility Mode]
38/69
COMPONENTS
The gears or pinions are made of:
1. high-resistance steel with hardened and
-
sized ones;
2. cast iron, with toothing lapped on the machine
during assembly, so as to give an even bearing
mainly used on large blowers.
PD Blowers38
8/18/2019 Training Pd Blowers [Compatibility Mode]
39/69
Differences S2H vs SNV/SNHDifferences S2H vs SNV/SNH
S2H blowers 2 lobes
Lubrication: oil / grease
Gears on opposite to drive side
SNV/SNH blowers 3 lobes
Lubrication: oil/oil
Gears on dr ive side
PD Blowers39
Pulsation damper for less vibrations and pulsations
8/18/2019 Training Pd Blowers [Compatibility Mode]
40/69
Presentation of the curvesPresentation of the curves
Outlet temperature
Out ut ower
Differential pressure
Flow rate
Speed
PD Blowers40
8/18/2019 Training Pd Blowers [Compatibility Mode]
41/69
Noise Characteristics
• Gears•
• Flowing gas
• Vibration generated noise
PD Blowers41
SF M di i
8/18/2019 Training Pd Blowers [Compatibility Mode]
42/69
SF Medium pressure series
4
2 6
58
10
911
PD Blowers42
PERFORMANCE OF NARODA BUILT TWIN LOBE
8/18/2019 Training Pd Blowers [Compatibility Mode]
43/69
PERFORMANCE OF NARODA BUILT TWIN LOBEPD BLOWERS.
MODEL MAXIMUM CAPACITY MAXIMUM DISCHARGE
M3/ HR
PRESSURE
PSIGS2H22 100 11
S2H23 152 6
S2H31 205 14
S2H32 300 11S2H33 506 6
S2H41 329 15
S2H42 579 9
S2H43 864 6S2H51 443 15
S2H52 884 7
PD Blowers43
S2H53 1059 6
PERFORMANCE OF WASQUHEL BUILT TRI LOBE
8/18/2019 Training Pd Blowers [Compatibility Mode]
44/69
PERFORMANCE OF WASQUHEL BUILT TRI LOBEPD BLOWERS.
MODEL MAXIMUM CAPACITY
M3/ HR
MAXIMUM DISCHARGE PRESSURE
PSIG
SN801 300 15
SN802 450 15
SN803 650 16
SN804 850 15
SN806 1250 16
SN809 2000 13
SN811 2300 15
SN822 4300 12
SN825 3200 16
SN842 5000 13
SN855 7000 16
SN870 8000 13
SN890 9000 13
PD Blowers44
A li ti d I t ll ti
8/18/2019 Training Pd Blowers [Compatibility Mode]
45/69
Applications and Installations
WWTP: Water purification (aeration)Pneumatic conveying - under pressure and under vacuum
Filtration
Plastics-Blowing granules into molding machine; inert gas conveying to
prevent contamination of polyurethane; hopper drying of materialgo ng o mac nes; opper ng; pneuma c convey ng.
Cement-Air supply to homogenize bulk cement going into storage bins;
fluidizing cement for conveying in batch plant; conveying from truck to
ready-mixed concrete batch plant to trucks.Paper mill , sugar plants,glass industry ,metal industry
PD Blowers45
Environment Water Treatment
8/18/2019 Training Pd Blowers [Compatibility Mode]
46/69
Environment - Water Treatment
Municipals Industrials
as e wa er as e wa er
- Air Scour => Sand removal or filter cleanin - Diffused air system (Oxygenation)
- Ozonization
-
PD Blowers46
Application: WWT
8/18/2019 Training Pd Blowers [Compatibility Mode]
47/69
Application: WWT Aeration
PD Blowers47
Environment Water Treatment
8/18/2019 Training Pd Blowers [Compatibility Mode]
48/69
Environment - Water Treatment
era on
• Technology used: – SF Plus
SN series
S2H series
– Multistage centrifugalWater level – Screw compressor
PD Blowers48
Environment - Water Treatment
8/18/2019 Training Pd Blowers [Compatibility Mode]
49/69
Environment - Water Treatment
era on
• Example of diffusers
PD Blowers49
Pneumatic conveying
8/18/2019 Training Pd Blowers [Compatibility Mode]
50/69
Pneumatic conveying
under pressure orvacuum
– emen
– Dry bulk
– Polystyrene – Powder
– Vacuum centralcleaning
Pneumatic conveying under vacuum
PD Blowers50
8/18/2019 Training Pd Blowers [Compatibility Mode]
51/69
Application: Chemical,Food, Paper
8/18/2019 Training Pd Blowers [Compatibility Mode]
52/69
Pneumatic Conveying (In plant)
PD Blowers52
Application: Food, Cement, Plastic, Pressurel di (T k T k )
8/18/2019 Training Pd Blowers [Compatibility Mode]
53/69
loading (Tanker Trucks)
PD Blowers53
Applications & Activities
8/18/2019 Training Pd Blowers [Compatibility Mode]
54/69
pp
• Industrial
– Stationery pneumatic conveying systems
– Pool oxygenation – Centralized vacuum cleaning
– Pneumatic handling systems
• emen o ys us, awasa , a emen y, a arge…
– Air for burners
– Gas desulphurization
–
– Pneumatic conveying systems – Air fluidisation
PD Blowers54
A li ti & A ti iti
8/18/2019 Training Pd Blowers [Compatibility Mode]
55/69
Applications & Activities
• Energy ( Alstom, Praxair, Air liquid …)
– Fly ash handling systems
– Coal power stations (air for burners)
– Fluidisation of coal powder for furnacefeeding
– Rapid cooling of turbines
• Paper Industry
– Drying systems & vapor recompression
–
handling Notebook
Envelopes
PD Blowers55
Applications & Activities
8/18/2019 Training Pd Blowers [Compatibility Mode]
56/69
pp
• Food industr – Pneumatic conveying (flour, sugar, wheat…)
– Aeration for fish farm and pneumatic conveying – Drying (ex tobacco…)
– acuum sys em gare e an ng an pac ng
• Chemical Industry
– Gas burner feedin – Gas transfer
– Gas recovery
– Mechanical steam recompression
–
– Plastics granulates manufacturing – Raw material feeding for extruders
PD Blowers56
Applications and Installations
8/18/2019 Training Pd Blowers [Compatibility Mode]
57/69
pp ca o s a d s a a o s
• Wet FGD system (Flux GasDesulphurization)
– oxidation air blower (PD or
centrifugal)
• Cement Plant
Pneumatic conveying blowers
(Polysius, Kawasaki…)
• Oxygen VPSA
Ox en Booster. HH or SN
(Praxair, Air liquid …)
PD Blowers57
Applications and Installations
8/18/2019 Training Pd Blowers [Compatibility Mode]
58/69
pp
PETROCHEMICALS
,BLOC II silencer) used for the
pneumatic conveying of polyethylene-,
Indonesia.(process by BP Chemical)
Special unit SNH 4 used for handling ofgases mixture (98% for nitrogen, 2% of
PD Blowers58
("Degasing").
Applications and Installations
8/18/2019 Training Pd Blowers [Compatibility Mode]
59/69
pp
PAPER & PRINTING MACHINERY
• Envelo e Manufacturin
PD blowers & screw compressor
used as central vacuum source.
• Paper Machinery
owers or a er recovery un erVacuum (HOLTZMAAN…)
• Printing ink treatment
Mechanical Vapor recompression
PD Blowers59
Application: Paper IndustryAir Knife
8/18/2019 Training Pd Blowers [Compatibility Mode]
60/69
Air Knife
PD Blowers60
Application: Power, Petro-ChemicalCombustion Air
8/18/2019 Training Pd Blowers [Compatibility Mode]
61/69
Combustion Air
PD Blowers61
Application: Chemical / MiningFiltration
8/18/2019 Training Pd Blowers [Compatibility Mode]
62/69
Filtration
PD Blowers62
Application: NuclearVacuum on nuclear waste cells
8/18/2019 Training Pd Blowers [Compatibility Mode]
63/69
Vacuum on nuclear waste cells
PD Blowers63
Application: Ice Breaker (CDN special)Prevent ice formation
8/18/2019 Training Pd Blowers [Compatibility Mode]
64/69
Prevent ice formation
PD Blowers64
Competition in India
8/18/2019 Training Pd Blowers [Compatibility Mode]
65/69
• Kay • Beta Maschienfaberik• PPI PUMPS• Aerzener • Kaeser •
• Air Equipments
• Shri Ram Industrial• Airex
• Usha• Flakt• Triveni Maneklal
• a s u• HM Blowers• Ricon
• Shree Gurunanak Dev• wam Industries• Unitech Air Engg
PD Blowers65
INDIAN MARKET FOR PD BLOWERS
8/18/2019 Training Pd Blowers [Compatibility Mode]
66/69
50,000 units,Value: $ 100M
• Target (AOP2009)
150 units,Value: $ 225K
PD Blowers66
IR Pricing v/s Competition
8/18/2019 Training Pd Blowers [Compatibility Mode]
67/69
• We are currently manufacturing the following blower bares at Naroda forthe global requirements :TS07,TS010,
S2H22,S2H23,S2H31,S2H32,S2H33,S2H41,S2H42,S3H43,S2H51,S2H52,S2H53
• We have already exported around 500 PD blowers from Naroda & thesehave been validated & are running very well across the world.
• e pac ages we ma e a aro a us ng ese aro a u ares wbe competitive in the Indian market.
• In case we have to offer imported packages (range other than made ataro a , we w e prem um pr ce compare o compe on.
• As we go along we can increase our manufacturing footprint at Narodato include more models.
PD Blowers67
Market Plan
8/18/2019 Training Pd Blowers [Compatibility Mode]
68/69
Market Covera e:• Existing IR dealers will market this product as a complimentary
product offering to T30 & LIS & MIS range since the customerprofiles are similar.•
personnel directly .Key Accounts list already circulated to IR salesforce.Same wil l also be circulated to all dealers.
• Initially dealers wil l give back to back orders to IR,at a later date
basis their comfort level the could stock orders for fast movinmodels.• We are creating three service specialits for PD blowers,who in
turn will t rain IR & distributor sales . These service specialists wil lbe trained in June.
• Basis the init ial sales traction IR to stock parts at Naroda taking
guidance from global team for established norms & stockingrecommendations.
• At a later stage, dealers would stock spares.
PD Blowers68
8/18/2019 Training Pd Blowers [Compatibility Mode]
69/69
PD Blowers69