TRAK Capabilities – C4I

To succeed in this strategy, TRAK has structured itself specifically to provide our military customers with:

• Close technical support from program definition to integration

• Fast product development and prototype lead time

• Reliable cost effective solutions built in volume

• A commitment to reducing lead times and on-time delivery

In addition, TRAK maintains the following certifications and registrations:

• ISO 9001:2000 Quality System

• AS9100:2004

• ISO 14001:1996 – Since 2005

• ISO 14001:2004

• DOD Internal Security – Since 1983

• IPC – Since 2000

• Numerous Major Customer Certifications

TRAK Compliant – Government/Industry Standards

• MIL-PRF-38534

• ANSI/J-STD-001

• NASA-STD-8739.3

TRAK Capabilities – C4I

TRAK Microwave is a world class supplier of high reliability microwave and RF sub-systems and components for the world's most demanding applications and environments. Our 40 years of experience in supporting C4I programs allows us to bea significant partner within the global military market. Our products consist ofoscillators, synthesizers, frequency converters, multipliers, comb generators, switches,switched filters, isolators and circulators, as well as complex integrated assemblies basedon these products. Builders of C4I systems view TRAK as the logical partner to meettoday’s demanding delivery schedules and to provide tomorrow’s technical solutions.We continue our commitment to investment in our people, equipment and manufacturing processes, but the evolution of TRAK is a direct result of continuousreturn customers…all major military equipment OEMs. Turn to the back cover ofthis brochure for a program heritage list. At the center of TRAK’s strategy, is the goal to exceed your expectations with the levels of service the industry requires.

ELECTRICAL SPECIFICATIONS

Integral SAASM Based GPS Receiver

Precise Time and Frequency Processing

Wide Variety of Plug – In Modules

RS-232, IEEE-488, Network Interfaces

GPS SAASM Modular Time Code Processor


Frequency Range: 1.65 – 2.9 GHz, Primary70 – 100 MHz, Secondary

Step Size: 100 Hz, Primary10 Hz, Secondary

Switching Speed: < 500µs, typical

19" Rack Mount

Seven Output Local Oscillator Assembly

CALIBRATIONSYNTHESIZER

CALIBRATIONSYNTHESIZER

3 MHz

.01-30 MHz10 Hz STEPS

70-100 MHz10 Hz STEPS

20-1200 MHz100 Hz STEPS

1.7-2.9 GHz100 Hz STEPS

5 MHz

15 MHz70 MHz175 MHz

3 GHz

SYNTHESIZER

SYNTHESIZER

5 MHz

REFERENCESIGNAL

DISTRIBUTION

XO

XO

XO

XO

XO


Input Frequency: 6.1 – 6.5 GHz

Dual IF Outputs: 70 MHz and 970 MHz

VME Bus Interface

Low Noise Design (With Full Digital Gain Control)

Multi-Rate Dual Down Converter


QUAD L.O. .70 – 1.0 GHz

Techniques Generator C-Band

Low/Phase Noise 1 kHz –110dBc/Hz

Man Machine Interface

Standard ATR Chassis

Multi-Function Source Assembly


RF Input Dual Outputs

Operating Frequency: 1740 MHz 12.18 GHz

Spurious: –70 dBc, typical

Phase Noise Enhancement: 20dB, maximum

50 dB Port to Port Isolation

X7 Multiplier


Frequency Range: 9.5 – 10.9 GHz

Step Size: 125 kHz

Spurious: –65 dBc

SSB Phase Noise: 100 kHz –115 dBc/Hz

Dual Module Synthesizer

TRAK Compliant - Government/Industry Standards

� MIL-PRF-38534

� ANSI/J-STD-001

� NASA-STD-8739.3

� ANSI/IPC-A-610 Class 2 and 3

� Various In-House Workmanship Standards thatComply with MIL-STN 2000 & 454

TRAK Certifications

� AS9100-2003

� ISO-9001:1994 Quality System – Since 1997

� ISO-9001:2000 Quality System – 2003

� DOD Internal Security – Since 1983

� IPC – Since 2000

� Numerous Major Customer Certifications

Partnering with TRAK may startwith design and layout through the

prototype and production phases oranywhere in between.

TRAK Experience

TRAK Microwave’s experience as a world class supplier ofhigh reliability microwave and RF subsystems andcomponents positions them as an ideal supplier for Build-to-Print manufacturing and test services. For morethan forty years, TRAK has been a major supplier for standard and custom designed products for the world’smost demanding defense, space and commercial applications and environments.

As a result of TRAK’s extensive experience their assemblyprocesses, materials controls, advanced testing proceduresand quality assurance processes are exceedingly well established. TRAK has a strong and broad product base, customer base and program heritage. In addition, TRAK isable to build and maintain product quality and excellencewhile consistently meeting or exceeding customer expectations.

2

TRAK Capabilities

TRAK is located in Tampa, Florida USA, on ten acres of land adjacent to the TampaInternational Airport and operates within a newly renovated 125,000 square footmanufacturing facility. TRAK Microwave’s philosophy supports consistent control ofthe manufacturing process, which guarantees excellent performance, cost efficiencies and timely deliveries to meet the critical demands of Build-to-Print customers. TRAK’s operational capacity enables the efficient manufacture and delivery of high mix, low to medium volume assemblies. Their philosophy provides a controlled evolution of applied RF technology from which all TRAK customers benefit.

TRAK is a financially strong company whose position is to fully understand the customer’s requirements with total commitment to meet or exceed them. TRAKaccomplishes customer goals by drawing on their extensive in-house capabilitiesand processes. Each assembly line has access to all in-house resources, whichuniquely positions TRAK to offer an extraordinary variety of production and testservices.

TRAK teams with their customers to meet cost goals by mutually investing in costsaving designs, entering into long term business relationships, identifying optimumrun rates and by using material purchasing agreements.

TRAK’s legacy centers on the design and fabrication of complex microwave assemblies and related products for defense, space and commercial applications.Major subsystems currently produced include oscillators, multipliers, comb generators, frequency converters, receivers, synthesizers and a variety of

multi-function assembles. TRAK produces various types ofmicrowave subsystems as well as many of the components

for such assemblies. This vertical integration benefitsTRAK’s customers with size, cost and delivery and is a

perfect match for Build-to-Print services, technicalexpertise and operational efficiencies.

Markets and Applications

TRAK Microwave Build-to-Print products are found in military aircraft, shipborne, missiles. and ground basedplatforms. Space applications include components forcommunications, meteorological and intelligence gathering satellites. TRAK commercial products are usedin point-to-point radio, wireless base stations, privateradio systems, collision avoidance systems, distance measuring equipment and airborne weather radar.These are the primary applications; however TRAK’s standard and custom product portfolio is very broadbased and maybe used in a myriad of high-tech electronic applications.

3

Manufacturing Technologies

Printed Circuit Board Assembly

� All Phases of Production for Surface MountPCB Assembly

� Pick and Place Equipment with Fine Pitch Down to10 mil and Components as Small as the 0402 Package (4000 parts/hr.)

� In-Line Convection Reflow Oven using NitrogenEnvironment

� Solder Deposition via Screenprinting

� New Generation, Non-Ozone DepletingCleaning System

� Adhesive Dispensing for Chip Bonding

� Automatic Optical Inspection - 2D Optical

� Component Placement (Chips/Fine PitchAFP/CGA)

Hybrid Assembly

� Established Assembly Processes Compliant to MIL-PRF-38534 Class K

� Class 10,000 and 100,000 Clean Rooms

� Ribbon Bonding from 2 to 80 mil, Thermosonic Wedge Bond

� Wire Bonding from .7 to 3 mil ThermosonicWedge Bond and Ball Bonding

� Gap Welding

� Ultraviolet Cleaning

� Plasma Cleaning

4

RF & Microwave Test

� HP3048 Phase Noise Test Sets

� Full Range of Network Scalar and Spectrum Analyzers

� Test Capability Up to 50 GHz

� On Site Calibration of Test Equipment

Test Engineering

� Test Process Development

� Design for Test (DFT)

� In-Circuit Test Fixture Development

� Functional Test Fixture Development

Environmental

� Vibration (Sine and Random)

� Mechanical Shock

� Thermal Cycle and Shock

� Temperature/Altitude

� Thermal Vacuum

� Humidity

� Constant acceleration

� X-Ray

� PIND (Particle Impact Noise Detection)

Special Process Lab

� Laser Sealing (inert atmosphere)

� Seam Sealing (inert atmosphere)

� Laser Marking

� Fine and Gross Leak Detection

Electrical Test, Design and Manufacturing

TRAK’s assembly techniques have been developed andperfected over many years and are continually monitored,revised and upgraded to remain current with applicationdemands. Assembly and test techniques include pick andplace automation, hybrid “chip and wire” assembly, as wellas, hand placement of parts. TRAK uses the most current testing methods and equipment available in the industry.

TRAK’s in-house design and fabrication capability for assembly and test fixtures provide our customers with convenience as well as cost benefits. Each assembly is tested and visually inspected to ensure it was manufacturedin accordance with applicable standards. The manufacturingprocess has an employee involved SPC program whererecords are collected and analyzed on a regular basis toidentify variations in processes. This provides valuable feedback to the manufacturing staff for TRAK’s continuousimprovement plans. TRAK’s versatile design software allowscustom units to be produced with a high confidence factor.

Processes

Program management is involved from the conception including the negotiation process thus ensuring thoroughcommunication at the earliest stages. All of the contractrequirements are reviewed at pre-order entry. Next, a salesorder containing all of the pertinent information is generatedin TRAK’s enterprise system to create necessary productionand inspection criteria.

TRAK’s policy is to competitively bid material purchases.For common materials utilized on various programs, pricing agreements are established to reduce material costs.Purchasing is constantly evaluating material costs and investigating alternate sources.

TRAK consistently exceeds expectations for continuousimprovement with sustained positive trends with resultslinked to specific process improvements. TRAK’s approachprovides flexible processes and anticipates future customerrequirements.

Material Control

As part of their enterprise system, TRAK has a fully functional ERP system for scheduling, tracking and controlof material. Lot and serial control is available whenrequired. TRAK maintains documentation controls consistent with industry standards, or as required on individual contracts.

Standards include procedures for Engineering ChangeNotices (ECNs), changes to customer controlled drawingsand general configuration management Customer reviewand approval of modifications are supported.

Performance and Repeatability

All RF parameters, such as phase noise, isolation andintermodulation are routinely tested on automated teststations within the facility, allowing quick analysis oflarge amounts of data. It is TRAK’s objective to provideassemblies that meet or exceed the customer specifications for electrical performance over the fullrange of environmental conditions. Electrical performance and repeatability are demonstrated throughqualification testing, LRIP (low rate initial production) and100% electrical test of critical parameters in production.TRAK uses automated or manual testing in accordancewith standardized or custom written test procedures and software. Most equipment is calibrated in accordancewith MIL-STD-45662A, ANSI/NCSL and Z540-1-1994.

5

6

Quality Assurance

TRAK’s Quality Assurance System is based on ISO-9001and meets the requirements of MIL-Q-9858A and MIL-I-45208A. TRAK facilities are registered to ISO 9001:2000 and AS9100 and continue to successfullypass semiannual audits. Quality Assurance operationsaddress incoming inspections, in-process inspections,final inspections, including data analysis and correctiveaction programs to ensure high quality products.

Quality control is actively involved with manufacturingoperations to monitor SPC trends and determine effectivecorrective actions, facilitate the material review boards, engineering change boards and new product releaseboards. Quality Assurance provides the failure analysisand trends tracking for customer returns.

Staff

TRAK staff has a complete understanding of their organization and how this supports the overall missionof the company and its customers. Customers are givendirect points of contact in program management andcontracts administration, which yields outstandingcommunication and timely problem resolution.

Production employees receive a variety of in-house training applicable to their jobs including courses in J-STD soldering, NASA soldering, ESD, Hazmat, documentation use, rework processes and OJT. TRAKensures that employees are cross trained for criticalneeds and support. TRAK’s turn over rate consistentlyranks significantly lower than industry and location standards reported.

TRAK maintains a first and second shift that is capable ofrapid expansion, which would significantly increasecapacity. In addition, TRAK has the ability to operate athird shift when needed to meet increasing demand.

TRAK’s quality philosophy conforms to a 6 Sigma program.Production data is collected, analyzed, acted on and monitored for improvement to complete the program. Inspection stations in the process, SPC teams and certified operators make up the program.

TRAK’s Continuous Improvement Program (CIP) goals are measured by the results of the following keyperformance indicators.

QualityFirst Pass Yield in %

On-Time Delivery in %Component dpmo

TimeWO Cycle Time in days/units

MDR Cycle Time in DaysI/Q/C Cycle in days

CostSupplier Management in %

Scrap X $1000Warranty Returns %

TRAK Microwave Corporation4726 Eisenhower Blvd.Tampa, FL 33634-6391 USAPhone: 813-901-7200 Fax: 813-901-7491

Email : [email protected] : www.trak.com

© TRAK Microwave Corp. Doc #FL315 05/04

TRAK Microwave Control Product Capabilities

TRAK Microwave has designed and produced control devices as internaluse microwave assembly designs for over 20 years. Responding tocustomer demands, TRAK now supplies our innovative control devicesdirect to OEM’s. Our control devices are used in a variety of applicationsincluding electronic warfare, electronic counter measure, radar, missile,communication, space and automated test equipment.

The TRAK control device product line includes switches, limiters, analog ordigitally controlled phase shifters and integrated assemblies. The typicaloperation frequencies are through 18 GHz with a mix of narrow-band,broad band and high power applications. The base switch technology issolid state using PIN diodes and GaAs FET devices.

General Switch Capabilities:u Military Level Quality Assurance

u Military Level Screening and Testing

u High Power Designs

u Custom Designs

u Integration of Multiple TRAK Products

u ISO 9001 Registered Company

General Switch Features:u Integrated Drivers

u Reflective and Non-Reflective Designs

u Laser Welded Hermetic Sealing

u Extended Frequency Ranges Up to 40 GHz

u Blind Mate, Drop-In, Coaxial, SMA, and TNC Connectors

u Silicon, GaAs PIN Diodes or GaAs FET’s

SPST

SP3T

For electrical and thermal design, TRAK usesstate-of-the-art simulation tools such as linearand non-linear simulators, 3D electromagnetic,FEA software and IR camera validation thatensures the highest product reliability. Ourautomatic "pick and place" assembly capabilitiesleverage price, volume and delivery schedulingadvantages.

TRAK offers custom and integrated design for all control products.

6.00

5.00

4.00

3.00

2.00

1.00

VS

WR

SPST SWITCH LOSS & VSWR

0.0

-1.0

-2.0

-3.0

-4.0

-5.0

-6.0

-7.0

-8.0

-9.0

-10.020181614121086420

Frequency [GHz]

Inse

rtio

n Lo

ss[d

B]

0.0

-20.0

-40.0

-60.0

-80.0

-100.0

Isol

aton

[dB

]

SPST SWITCH ISOLATION

0 2 4 6 8 10 12 14 16 18 20

Frequency [GHz]

Notes:*1.0 µ-Sec 0.1% dutySPST: User Configurable Non-Inverting or Inverting ControlsSP2T: Dual Independent Control or Single Complementary ControlSP3T & SP4T: Independent or BCD Control (Non-Inverting or Inverting Options)

Type Frequency Insertion VSWR Isolation Switching RF Power RF Power DC PackageRange Loss Speed CW Peak Power Code(GHz) (dB) MAX MAX (dB) MIN (nS) MAX (dBm) MAX W(MAX)* (VDC)

SPST 2-6 1.40 1.6:1 55 20 +33 100 +5/-12 S1

6-12 1.60 1.8:1 60 20 +33 100 +5/-12 S1

12-18 2.20 2.0:1 60 20 +33 100 +5/-12 S1

2-18 2.20 2.0:1 55 20 +33 100 +5/-12 S1

SP2T 0.5-2 1.20 1.5:1 70 25 +23 75 +5/-12 S2

2-6 1.80 1.6:1 70 25 +23 75 +5/-12 S2

6-12 2.30 1.8:1 65 25 +23 75 +5/-12 S2

12-18 2.80 2.0:1 60 25 +23 75 +5/-12 S2

2-18 3.00 2.2:1 60 25 +23 75 +5/-12 S2

SP3T 0.5-2 1.30 1.5:1 70 40 +23 75 +5/-5 S3

2-6 2.00 1.6:1 70 40 +23 75 +5/-5 S3

6-12 2.50 1.8:1 65 40 +23 75 +5/-5 S3

12-18 3.00 2.0:1 60 40 +23 75 +5/-5 S3

2-18 3.20 2.2:1 60 40 +23 75 +5/-5 S3

SP4T 0.5-2 1.50 1.5:1 70 40 +23 75 +5/-5 S4

2-6 2.20 1.6:1 70 40 +23 75 +5/-5 S4

6-12 2.80 1.8:1 65 40 +23 75 +5/-5 S4

12-18 3.20 2.0:1 60 40 +23 75 +5/-5 S4

2-18 3.50 2.2:1 60 40 +23 75 +5/-5 S4

Switch Capabilities

Features:u Standard Designs from 0.5 to 18 GHz

u Integrated TTL Compatible Switch Drivers

u High Speed Drivers

u Reflective Designs

u EMI Filtered Power Lines

u Reverse Voltage Protection

u Environmentally Sealed

u Operating Temperature: -40C to + 85C

Options:u Alternate Operating Voltages

u Amplitude and Phase Matching

u Video Filters

u Non-Reflective Designs


u Custom Packaging

u Custom and Field Replaceable Connectors

u Custom Screening and Test Plans

u Alternate Control Logic: Non-Inverting, Inverting, BCD

SP2T

SP4T

Integrated Control Device Assemblies

TRAK Microwave’s general capabilities include custom-designed assemblies, multifunction assemblies, control devices, sources, andsubsystems. In addition to our portfolio of control devices, TRAK specializes in the design and manufacture of integrated MicrowaveAssemblies (IMAs) for defense, space and commercial applications.

Offering distinct advantages over multiple, interconnected and discrete functions, IMAs take advantage of the latest advances inperformance and functionality to offer a form, fit and function upgrade path from existing outdated technology as well asproviding the best value for new designs. In doing so, IMAs also offer overall improved performance, reliability and are ideallysuited to applications where electrical performance and mechanical constraints are often the prime considerations. TRAKintegrated assemblies provide cost and time savings associated with the elimination of multiple interconnects and individualcomponent testing.

TRAK Integrated assemblies may include Switches, Limiters,Attenuators, Filters, Ferrites, Oscillators, Synthesizers, Multipliers,Couplers and Phase Shifters. Features and specifications shownhere are examples of TRAK control device integrated designs.

Switch Triplexer

Features:

u Integrated Switch Driver and Control Logic

u Amplitude and Phase Matched Switch Channels

u Reverse and Over-Voltage Protection

u Field Replaceable SMA Connectors

u Military Screening

Frequency 800-2100 MHzInsertion Loss 0.8 dBVSWR 1.5:1Loss Balance +/- 0.2 dBPhase Balance +/- 5 degreesSwitch Isolation 50 dB

Switch-Switch Isolation 90 dBRF Power 1 WattSwitching Speed 1.0 uSecControl TTL CompatibleRF Connectors GPO Blind MateOperating Temp -40C to + 85CDimensions 1.00" x 3.00" x 0.40"

Switch Triplexer

Switch Network AssemblyFrequency 6-18 GHzInsertion Loss 12.5 dBVSWR 2.5:1Isolation 50 dBRF Power +20 dBmSwitching Speed 50 nSecRF Connectors SMAOperating Temp -54C to +95CDimensions 4.00" x 2.25" x 0.70"

Switch Network Assembly

Features:

u Switch-Switch Isolation 90 dB

u Integrated Driver and Decoder

u Amplitude and Phase Matched Switch Channels

u Reverse Voltage and Over-Voltage Protection

u GPO Blind Mate Connectors


General Custom Switch Features:

u Phased Arrays, Combining Control Deviceswith Microstrip Isolators

u TR Limiters, Combining Ferrite Circulators with PIN Limiter

u Switch Filter Banks

u Linear and Digitally Controlled Attenuators

u Digitally Controlled Phase Shifters

u Standard Screening and Test Plans 6-18 GHz SWITCHED TRIPLEXER

10-14 GHzBRF

SP3T

SP3T

SP3T

SP3T

SP3T

SP3T

RF INPUT6-18 GHz

RF OUTPUTCHANNELIZED6-10 GHz or10-14 GHz or14-18 GHz

10 GHz LPF

14 GHz LPF

14 GHz HPF

10 GHz HPF

10-14 GHzBPF

Specifications:

Specifications:

TRAK is an ISO 9001 registered company that has designed and manufactured high reliability RF and microwavecomponents and integrated assemblies for military, space and commercial markets for over 40 years.

Insertion LossTX – ANT 0.6 dB MaxANT – RX (through Limiter) 1.2 dB Max

Isolation ANT – TX 36 dB MinReturn Loss (all ports) 20 dB MinLimiter Leakage (ANT-RX) +36 dBm

Frequency X-Band (5%)Insertion Loss 0.8 dBVSWR 1.5:1Flat Leakage 10 dBm MaxRF Power (CW) 2 Watts RF Power (Peak) 10 Watts @ 1.0 u-Sec @ .1%Recovery Time 2.0 uSecFormat Microstrip Drop-InI/O 0.015" Wide Microstrip TabsOperating Temp -40C to + 85CDimensions 0.50" x 0.25" x 0.15"

Frequency 1530-1660 MHzInsertion Loss 1.6 dBVSWR 1.5:1Loss Balance 1.0 dBPhase Accuracy 45 degrees: +/- 6 degrees

90 degrees: +/- 8 degrees180 degrees: +/-10 degrees

RF Power 2 WattsSwitching Speed 10 uSecRF Connectors Blind Mate OSPOperating Temp -40C to +85CDimensions 2.75" x 3.20" x 0.50"

Microstrip Duplexer with Limiter

PIN Limiter

Digitally Controlled Phase Shifter

Microstrip Duplexer with Limiter

Features:

u Highly Integrated Structure

u Magnetically Shielded

u Small Footprint

u Integrated Limiter

u Space Qualified

PIN Limiter

Features:

u Frequency Ranges from 0.5 to 18 GHz

u Short Pulse Limiters 100 – 1000 Watt Peak

u CW Limiters – 50 Watt

u Male-Female RF Connector Options

Digitally Controlled Phase Shifter

Features:

u L Band 3 Bit

u Integrated Switch Drivers

u Internal BIT Logic Circuits

u Blind Mate RF Connectors

u Reverse Voltage Protection

u Over-Voltage Protection

Specifications subject to change without notice.

Specifications:

Specifications:

Specifications:





• A commitment to reducing lead times and on time delivery

In addition, TRAK maintains the following certifications and registrations:• ISO 9001:2000 Quality System

• AS9100:2004

• ISO 14001:1996 – Since 2005

• ISO 14001:2004





• MIL-PRF-38534

• ANSI/J-STD-001

• NASA-STD-8739.3

TRAK Capabilities – Electronic Warfare

TRAK Microwave is a world class supplier of high reliability microwave and RF sub-systemsand components for the world's most demanding applications and environments. Our40 years of experience in supplying products for Electronic Warfare applications hasallowed us to be a significant partner within the global military market. Our productsconsist of oscillators, synthesizers, frequency converters, multipliers, comb generators,switches, switched filters, isolators and circulators, as well as complex integrated assemblies based on these products. Builders of Electronic Warfare systems view TRAKas the logical partner to meet today’s demanding delivery schedules and to providetomorrow’s technical solutions. We continue our commitment to investment in ourpeople, equipment and manufacturing processes, but the evolution of TRAK is a directresult of continuous return customers…all major military equipment OEMs. Turn tothe back cover of this brochure for a program heritage list. At the center of TRAK’s strategy,is the goal to exceed your expectations with the levels of service the industry requires.


Operating Frequency: 1020 MHz 5100 MHz

Output Power: +5dBm±2dB +13dBm±2dB

SSB Phase Noise (dBc/Hz, typical):Offset 1020 MHz 5100 MHz10 kHz –118 –105100 kHz –133 –120

Spurious: –70dBc, max

Dual Output Oscillator


Frequency: C-Band

Pass Band Frequencies: Every 500 MHz

Pass Band Insertion Loss: 6-10 dB

Switching Speed: 100 nSec, max

Five Channel Switched


Frequency Range: 3.25 – 4.75 GHz

Step Size: 500 MHz

Switching Speed: 1µs, max

SSB Phase Noise (dBc/Hz, typical):

Offset10 kHz –108100 kHz –113

3.25 to 4.75 GHz Direct Synthesizer

REG

X5

RF ENABLE

+14V+5V

DC ENABLE

1020 MHz

5100 MHz

X8


Frequency Range: 5 – 10 GHz, approximate

Step Size: 500 kHz

Output Power: 17 dBm ±3 dB typical

SSB Phase Noise (dBc/Hz, typical)

Offset100 kHz –85 @10 GHz1 MHz –125 @10 GHz

5 to 10 GHz YIG Synthesizer

Filter ELECTRICAL SPECIFICATIONS

Operating Frequency: 5.2 GHz

Reference Input: 100 MHz @ 0 dBm ± 3 dB

Output Power: + 16 dBm ± 1 dB

SSB Phase Noise (dBc/Hz, typical):

Offset1 kHz -9520 kHz -113

5.2 GHz Phase Locked Oscillator


Band 1 Band 2 Band 3

Freq. Passband: 10 – 12.6 GHz 12.6 – 16 GHz 16 – 20 GHz

60 dB Rejection: DC – 7 GHz DC – 8 GHz DC – 10 GHz15 – 26 GHz 19 – 26 GHz 24 – 26 GHz

Insertion Loss: 6dB, typical

Switching Speed: 20 nSec

10-20 GHz Switched Filter


Frequency Range: 9.25 – 19 GHz

Step Size: ≤ 1 kHz

Switching Speed: < 500 nsec

SSB Phase Noise (dBc/Hz @ 19 GHz):

Offset1 kHz –9510 kHz –113

9.25 to 19 GHz High Speed Direct Synthesizer

TRAK Microwave CorporationA Smiths Group Company

4726 Eisenhower Blvd.Tampa, FL 33634-6391 USAPhone: 813-901-7200Fax: 813-901-7491

Email: [email protected]: www.trak.com


ALR-67

JSF

F-22

EFA

ALR-56C

ALR-56M

E-2C

AN/ASQ-213

ALQ-135

ALQ-131

IDF-PHOENIX

ALQ-165

PLAID

F161

F16J





• A commitment to reducing lead times and on time delivery

In addition, TRAK maintains the following certifications and registrations:

• ISO 9001:2000 Quality System

• AS9100:2004

• ISO 14001:1966 – Since 2005

• ISO 14001:2004





• MIL-PRF-38534

• ANSI/J-STD-001

• NASA-STD-8739.3

TRAK Capabilities – Missiles/Radar

TRAK Microwave is a world class supplier of high reliability microwave and RF sub-systems and components for the world’s most demanding applications and environments. Our 40 years of experience in Missile and Radar products has allowed usto be a significant partner within the global military market. Our products consist ofoscillators, synthesizers, frequency converters, multipliers, comb generators, switches,switched filters, isolators and circulators, as well as complex integrated assemblies basedon these products. Builders of Missile and Radar systems view TRAK as the logical partner to meet today’s demanding delivery schedules and to provide tomorrow’s technical solutions. We continue our commitment to investment in our people,equipment and manufacturing processes, but the evolution of TRAK is a direct resultof continuous return customers…all major military equipment OEMs. Turn to theback cover of this brochure for a program heritage list. At the center of TRAK’s strategy,is the goal to exceed your expectations with the levels of service the industry requires.


Frequency: C-Band ± 50 MHz

Power Output: + 30 dBm

Power Control Range: 60 dB min

Noise Figure: 5 dB max, 3 dB typical

Radar Altimeter


Frequency Range: Ku-Band

Gain: 8 dB

Switch Isolation: 40 dB

Gain and Phase Tracking

Ku-Band Phase Matched Switched Module

AMP VIDEO OUTRx IN BLANKING AGC MIXERVIDEO SWITCHEDAGC FILTER/AMP

VIDEOOUTPUT

Tx OUTPOWER

AMPFILTER

ON/OFFCONTROL CONTROL

POWERSPLITTER VCO

CAL

STC AGCVIDEOAGC

BWSELECT

VCCPULSE

GATE POWERCONTROL CONTROL

FREQ

4


Input Frequency: 100 to 250 MHz

Output Frequency: 200 to 500 MHz

Conversion Loss:Fin = 100 to 250 MHz 9.3 dB (typical)

–54ºC to +85ºC 10.8 dB (maximum)

Low Residual Phase Noise–182dBc/Hz@10 kHz

X2 Multiplier


Operating Frequency: Ku-Band

Stability: ±50 ppm over temperature Note

Output Power: ± 13 dBm ± 1.5 dB, maximum

SSB Phase Noise: –115 dBc/Hz & 10 kHz

Spurious (.01-22 GHz): –70 dBc, typical

Note: Instant turn on, low vibration sensitivity SC-Cut XO

Low Vibration Sensitivity Oscillator


LO 1 LO 2 LO 3

Freq. Range: X-Band L-Band 60 MHz

Step Size: 36 28 MHz

Switching Speed: 10 10 µs, max

Output Power: +16 +16 +3 dBm

SSB Phase Noise10 kHz –110 –120 –140

Multi Output Stalo Synthesizer


Operating Frequency: 60 – 125 MHz customer specified

Accuracy: ± 25 ppm, typical

Output Power: + 23 dBm ± 2 dB

SSB Phase Noise:Note 1

10 kHz –178 dBc/Hz, typical

Note 1: Static conditions only. See plot.

Ultra Low Noise Crystal Oscillator

-70

-80

-90

-100

-110

-120

-130

-140

-150

-160

-170

-180

-190 10 100 1K 10K 100K 1M 10M

Carrier = 100 MHz

(f ) [dBc/Hz] vs f [Hz]

TRAK Microwave CorporationA Smiths Group Company

4726 Eisenhower Blvd.Tampa, FL 33634-6391 USAPhone: 813-901-7200Fax: 813-901-7491

Email: [email protected]: www.trak.com


AIM-7

AMRAAM

AMX

APAR

ATACMS

BAT

COSMO

EFA Eurofighter

ESSM

Flying Tiger

Grifo

Longbow

Microwave Seeker

PAC-3

Patriot

Penguin

RadarSat

SM-2

SPY-1D/E

THAAD

Documents

TRAK Capabilities – C4I