TraverseEdge 2020 System Documentation Ordering TraverseEdge 2020 System Documentation ... time without obligation on the part of Turin Networks to provide notification of such revision

Turin Networks Inc.

TraverseEdge 2020 System Documentation

Software Release 5.0.xPublication Date: April 2007

Document Number: 800-0016-50 Rev. A

Ordering Guide

Copyright © 2007 Turin Networks, Inc.

All rights reserved. This document contains proprietary and confidential information of Turin Networks, Inc., and may not be used, reproduced, or distributed except as authorized by Turin Networks. No part of this publication may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation or adaptation) without written permission from Turin Networks, Inc.

Turin Networks reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Turin Networks to provide notification of such revision or change. Turin Networks may make improvements or changes in the product(s) described in this manual at any time.

Turin Networks Trademarks

Turin Networks, the Turin Networks logo, Traverse, TraverseEdge, Traverse PacketEdge, TransAccess, TransNav, Traverse PacketEdge, TPE-1200, TE-2020, TE-206, TN-Xpert, TN-Xsight, TN-Xconnect, TN-Xtend, TN-Xrelay, and Creating The Broadband Edge are trademarks of Turin Networks, Inc. or its affiliates in the United States and other countries. All other trademarks, service marks, product names, or brand names mentioned in this document are the property of their respective owners. Inquiries concerning such products, services, or marks should be made directly to those companies.

Product Use

The TraverseEdge 2020 is part of a family of products designed and manufactured by Turin Networks for the telecommunications industry.

Government Use

Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in FAR 12.212 (Commercial Computer Software-Restricted Rights) and DFAR 227.7202 (Rights in Technical Data and Computer Software), as applicable.

Release 5.0.x Turin Networks Page iii

PREFACEPREFACEPREFACEPREFACE

Revision History The following lists the sections of this document affected by any informational changes:

Section Issue Date Reason For Change

All 01 4/2007 First Release 5.0 Version (Preliminary)

Related Documents The following documents pertain to Turin’s TraverseEdge 2020 (TE-2020) optical transport equipment. For online documentation, go to www.force10networks.com.

Table 1 TE-2020™ Document List

Document Title Description

TE-2020 Ordering Guide Provides a brief description of each module available for the TE-2020 system, part numbers, compatibility information, and the contact information required to order them.

TE-2020 Users Guide Provides information vital for proper operation and maintenance of Turin Networks TE-2020 system. Information provided deals with processes and procedures for turn-up, test, maintenance duties, input command sequences, valid parameters, and expected responses in TL-1 and TN-Sight.

TE-2020 Applications Engineering Guide

Provides information vital for the proper deployment of a Turin Networks TE-2020 system. Information provided deals with environmental requirements, specifications, and applications.

TE-2020 Hardware Installation Guide

Provides information vital for proper installation of Turin Networks TE-2020 equipment. Information provided deals with site layout, required hardware, power connections, cable connections, and interfaces that must be hardwired.

TE-2020 TL-1 Reference Guide

Provides information vital for proper communication with Turin Networks TE-2020 system. Information provided deals with all TL-1 command structures, valid parameters, and expected responses, and error codes.

TE-2020 Hardware Description Guide

Provides detailed information for each card, shelf and accessory for a Turin Networks TE-2020 system. Information provided includes card level diagrams, operational requirements, specifications, and applications.

Table 2 TN-Xpert™ Document List


TN-Xpert Installation Guide Provides information required to properly install and maintain TN-Xpert Client and Server for both Solaris and Windows Environments. Information provided deals with Operation System configuration, database installation, user account configuration, TN-Xpert software installation and Network Element IP connectivity

http://www.turinnetworks.com/infocenter2/user_reg.asp

Page iv Turin Networks Release 5.0.x

PrecautionsThroughout this document, there are important precautionary statements used to warn of possible hazards to persons or equipment. A precaution identifies a possible hazard and then explains what may happen if the hazard is not avoided. The Danger, Warning, and Caution statements should be followed at all times to ensure safe and proper installation, operation, and reliability of the product. When multiple precautions are present, they are listed in order of severity as follows:

Danger! Indicates that a certain risk is associated with the task that will cause severe per-sonal injury, death, or substantial property damage if the procedure is not adhered to as written.

Warning! Indicates that a certain risk is associated with the task that can cause personal injury, death, or substantial property damage if the procedure is not adhered to as written.

Caution! Indicates that a certain risk is associated with the task that can or will cause per-sonal injury or property damage if the procedure is not adhered to as written.

General Safety PrecautionsThese precautions will be found throughout the document whenever the optical cards or other system components are being discussed.

Danger! Never look into the end of an optical fiber. Exposure to invisible LASER radiation can cause serious and/or permanent damage to the eye or even blindness. Verify the optical source is disabled through the use of an optical power meter before handling optical fibers. Use of controls, adjustments, or procedures other than those specified within this document may result in hazardous laser radiation expo-sure.

Caution! Electrostatic Discharge (ESD) sensitive devices. ESD can cause catastrophic fail-ure or degraded life and performance of a device. Use an anti-static wrist strap connected to a properly grounded source before contacting any electronic devices.

Standards ComplianceNEBS Level 3 per SR-3580 (ref. GR-63 & GR-1089)

UL 60950, 3rd Edition

CDRH Laser Certification

FCC Part 15 Class B

ANSI Z136.1 - 1993 - American National Standard for the Safe Use of Lasers

TN-Xpert Users Guide Provides information vital for proper operation and maintenance of Turin Networks TE-2020 and TE-206 systems. Information provided deals with processes and procedures for turn-up, test, maintenance duties, input command sequences, valid parameters, and expected responses using TN-Xpert™.

Table 2 TN-Xpert™ Document List


Release 5.0.x Turin Networks Page v

FCC WarningThe TE-2020 system has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when this equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio and television communications. Operation of this equipment in a residential area is likely to cause interference, in which case the user will be required to correct the interference at his or her own expense. Shielded cables must be used with this unit to ensure compliance with the Class A FCC limits.

Contact Information

This section contains the addresses and phone numbers of Turin Networks offices. For sales and technical assistance, go to www.force10networks.com.

Query and Contact Information Matrix

Query Contact Group

Contact Information

• Warranty Issues

• Part Issues

• Repair Service

• Upgrades

• Installation and Test

• Training

Technical Assistance Center (TAC)

Inside the U.S., toll-free 1-888-887-4638Outside the U.S. 707-665-4335E-mail [email protected]

http://www.turinnetworks.com/html/support_assistance.htm

http://www.turinnetworks.com/html/support_assistance.htm

Page vi Turin Networks Release 5.0.x

If You Need Assistance

If you need assistance while working with the TE-1200 product, contact the Technical Assistance Center (TAC). See the “Query and Contact Information Matrix” table above. TAC is available 24 hours a day, 7 days a week. E-mail support (24-hour response) is also available through: [email protected].

Calling for Repairs

If repair is necessary, call Technical Assistance at 1-866-948-7625 for a Return Material Authorization (RMA) number before sending the unit. The RMA number must be prominently displayed on all equipment cartons.

When calling outside the United States, use the appropriate international access code, and then call 707-665-4355 to contact the Repair Facility.

When shipping equipment for repair, follow these steps:1. Pack the unit securely.

2. Enclose a note describing the exact problem.

3. Enclose a copy of the invoice that verifies the warranty status.

4. Ship the unit PREPAID to the following address:

Force10 Networks, Inc.Attn: RMA # ________700 N. Glenville Dr.Richardson, TX 75081 USA

Acronyms

ACO Alarm Cut-offADM Add/Drop MultiplexerBITS Building Integrated Timing SupplyBLSR Bi-directional Line Switched RingCCT Common Control and TimingCDRH Center for Devices and Radiological HealthCLI Command Line InterfaceCO Central OfficeD&C Drop and ContiunueDCC Data Communications ChannelDS3 Digital Signal Level 3 at 45 MbpsDWDM Dense Wave Division MultiplexingEC1 Electrical Carrier Level 1EMS Element Management SystemEoS Ethernet Over SONETFCC Federal Communications Commission

Release 5.0.x Turin Networks Page vii

FTP File Transfer ProtocolGbE Giga-bit EthernetGFP Generic Framing ProcedureGMPLS Generalized Multi-Protocol Label Switching GNE Gateway Network ElementGUI Graphical User InterfaceHTTP Hyper-text Transfer ProtocolIR Intermediate ReachLAN Local Area NetworkLDCC Line Data Communications ChannelLDF Lightwave Distribution FrameLEI Local Equipment InterconnectLR Long ReachLSP Label Switched PathLTE Line Terminating EquipmentMAC Media Access ControlMMF Multi-mode FiberNEBS Network Equipment - Building SystemsNE Network ElementNTP Network Time ProtocolNUT Non-Preemptable Unprotected TrafficO-ADM Optical Add Drop MultiplexerOAM&P Operations, Administration, Maintenance and ProvisioningOC Optical CarrierOC-12 Optical Carrier Level 12 at 622 MbpsOC-192 Optical Carrier Level 192 at 9.6 GbpsOC-3 Optical Carrier Level 3 at 155 MbpsOC-48 Optical Carrier Level 48 at 2.4 GbpsOS Operating SystemOSPF Open Shortest Path FirstOSS Operation Support SystemPCA Protected Channel AccessPLM Physical Layer ModulePOH Path OverheadRST ResetRU Rack Unit (1 RU = 1.75”)RX ReceiveSONET Synchronous Optical NetworkSLA Service Level AgreementSMF Single Mode FiberSR Short ReachSTAT StatusSTS Concatenated Synchronous Transport SignalSTS-1c Concatenated Synchronous Transport Signal Level 1 at 52 MbpsSTS-12c Concatenated Synchronous Transport Signal Level 12 at 622 MbpsSTS-3c Concatenated Synchronous Transport Signal Level 3 at 155 MbpsSTS-48c Concatenated Synchronous Transport Signal Level 48 at 2.4 Gbps

Page viii Turin Networks Release 5.0.x

TBD To Be DeterminedTCP/IP Transport Control Protocol/Internet ProtocolTID Target IdentifierTL-1 Transaction Language Level 1TX TransmitUL Underwriters LaboratoriesUPSR Unidirectional Path Switched RingVC Virtual ConcatenationVdc Voltage - Direct CurrentVLAN Virtual LanVPN Virtual Private NetworkVR Very Long ReachWDM Wave Division Multiplexing

TraverseEdge 2020 Ordering Guide

Release 5.0.x Turin Networks Page ix

Table of Contents

Item Page

Chapter 1 Introduction ............................................................................................................................................ 1-11.1 Overview ..................................................................................................................................................... 1-11.2 TE-2020 Description .................................................................................................................................... 1-1

1.3 TE-206 .......................................................................................................................................................... 1-1Chapter 2 Rack Configuration ................................................................................................................................ 2-1

2.1 Rack Description .......................................................................................................................................... 2-1

2.2 TE-2020 Shelves .......................................................................................................................................... 2-12.3 Equipment Layout ........................................................................................................................................ 2-1

Chapter 3 Compatibility .......................................................................................................................................... 3-13.1 Release 05.00.00 ......................................................................................................................................... 3-1

3.1.1 Shelves ............................................................................................................................................... 3-13.1.2 Plug-in Units........................................................................................................................................ 3-1

Chapter 4 Unit Details ............................................................................................................................................ 4-14.1 TE-2020 Shelves .......................................................................................................................................... 4-1

4.1.1 TE-2020 Main Shelf ........................................................................................................................... 4-14.1.2 OTS2................................................................................................................................................... 4-34.1.3 DS3/EC1 Tributary Shelf (ETS1)......................................................................................................... 4-44.1.4 ETS2 Shelf .......................................................................................................................................... 4-5

4.2 Shelf Plug-in Units ........................................................................................................................................ 4-6

4.2.1 Fan Trays ............................................................................................................................................ 4-64.2.2 Common Control and Timing Cards.................................................................................................... 4-94.2.3 Blank Cover Panels........................................................................................................................... 4-144.2.4 Fan Filters ......................................................................................................................................... 4-194.2.5 Chassis Filters................................................................................................................................... 4-21

4.3 Physical Layer Modules (PLMs) ................................................................................................................. 4-234.3.1 OC-192 PLMs ................................................................................................................................... 4-234.3.2 OC-48 PLMs .................................................................................................................................... 4-254.3.3 OC-12 PLMs ..................................................................................................................................... 4-324.3.4 OC-3 PLMs ....................................................................................................................................... 4-334.3.5 GbE PLMs......................................................................................................................................... 4-344.3.6 DS3/EC1 PLMs ................................................................................................................................. 4-354.3.7 DS1 PLMs......................................................................................................................................... 4-364.3.8 FastE PLM ........................................................................................................................................ 4-37

4.4 Cable and Fiber Assemblies ...................................................................................................................... 4-384.4.1 LEI Cables......................................................................................................................................... 4-384.4.2 Coax Cable ....................................................................................................................................... 4-394.4.3 Fiber Cable........................................................................................................................................ 4-404.4.4 DS1 Cables ...................................................................................................................................... 4-434.4.5 FastE Cable ..................................................................................................................................... 4-44

4.5 Kits ............................................................................................................................................................. 4-46

4.5.1 Fiber Cleaning Kit............................................................................................................................. 4-464.6 Documentation ........................................................................................................................................... 4-47

4.7 TE-2020 System Software ......................................................................................................................... 4-494.8 TN-Xpert Element Management System Software .................................................................................... 4-49

Chapter 5 Ancillary Equipment .............................................................................................................................. 5-15.1 Fiber Storage Tray ........................................................................................................................................ 5-15.2 DS1 Patch Panel .......................................................................................................................................... 5-25.3 FastE Patch Panel...................................................................................................................................... s 5-3

Chapter 6 System Design Worksheets .................................................................................................................. 6-1


Page x Turin Networks Release 5.0.x


Release 5.0.x Turin Networks Page xi

List of Figures

Item Page

Chapter 1 IntroductionChapter 2 Rack Configuration

Figure 2-1 Typical 23" Shelf Installation Example .............................................................................................. 2-2

Chapter 3 CompatibilityChapter 4 Unit Details

Figure 4-1 TE-2020 Main Shelf - 19” .................................................................................................................. 4-1

Figure 4-2 OTS2 Shelf - 19” ............................................................................................................................... 4-3Figure 4-3 DS3/EC1 Tributary Shelf - 19”........................................................................................................... 4-4Figure 4-4 ETS2 Shelf - 19”................................................................................................................................ 4-5

Figure 4-5 TE-2020 Main Fan Tray .................................................................................................................... 4-6Figure 4-6 OTS2 Fan Tray.................................................................................................................................. 4-7Figure 4-7 ETS Fan Tray .................................................................................................................................... 4-8

Figure 4-8 TE-2020 Main CCT ........................................................................................................................... 4-9Figure 4-9 OTS2 CCT....................................................................................................................................... 4-11Figure 4-10 DS3/EC1 Tributary CCT.................................................................................................................. 4-12

Figure 4-11 ETS2 CCT....................................................................................................................................... 4-13Figure 4-12 OC-192 PLM Blank Cover Panel..................................................................................................... 4-14Figure 4-13 OC-192 PLM Blank ......................................................................................................................... 4-15

Figure 4-14 Optical PLM Blank........................................................................................................................... 4-16Figure 4-15 DS3/EC1 PLM Blank ....................................................................................................................... 4-17Figure 4-16 DS1/FE PLM Blank ......................................................................................................................... 4-18

Figure 4-17 2 RU Fan Filter ................................................................................................................................ 4-19Figure 4-18 3 RU Fan Filter ................................................................................................................................ 4-20Figure 4-19 2 RU Chassis Filter ......................................................................................................................... 4-21

Figure 4-20 3 RU Chassis Filter ......................................................................................................................... 4-22Figure 4-21 OC-192 x1 PLM............................................................................................................................... 4-24Figure 4-22 OC-48 x1 PLM................................................................................................................................. 4-29

Figure 4-23 OC-48 x2 PLM................................................................................................................................. 4-29Figure 4-24 OC-48 x4 PLM................................................................................................................................. 4-30Figure 4-25 OC-48 x1 SFP Base PLM ............................................................................................................... 4-30

Figure 4-26 SFP Module..................................................................................................................................... 4-31Figure 4-27 OC-12 x4 PLM................................................................................................................................. 4-32Figure 4-28 OC-3 x4 PLM................................................................................................................................... 4-33

Figure 4-29 GbE x2 PLM.................................................................................................................................... 4-34Figure 4-30 DS3/EC1 x12 PLM .......................................................................................................................... 4-35Figure 4-31 DS1 x84 PLM .................................................................................................................................. 4-36

Figure 4-32 FastE x12 PLM................................................................................................................................ 4-37Figure 4-33 LEI Cable Pair ................................................................................................................................. 4-38Figure 4-34 Type 735 12-Pack BNC-BNC Cable Bundle ................................................................................... 4-39

Figure 4-35 Type 735 24-Pack BNC-BNC Cable Bundle ................................................................................... 4-39Figure 4-36 Optical PLM MPO Adapter Cables.................................................................................................. 4-40Figure 4-37 Optical LC Adapter Cable................................................................................................................ 4-41

Figure 4-38 Optical PLM SC Adapter Cable....................................................................................................... 4-42Figure 4-39 Unterminated DS1 Cable ................................................................................................................ 4-43Figure 4-40 Terminated DS1 Cable.................................................................................................................... 4-43

Figure 4-41 FastE Cable..................................................................................................................................... 4-44Figure 4-42 Serial User Port Cable..................................................................................................................... 4-45


Page xii Turin Networks Release 5.0.x

Figure 4-43 Fiber Cleaning Kit............................................................................................................................ 4-46Chapter 5 Ancillary Equipment

Figure 5-1 Fiber Storage Tray ............................................................................................................................ 5-1

Figure 5-2 DS1 Patch Panel ............................................................................................................................... 5-2Figure 5-3 FastE Patch Panels........................................................................................................................... 5-3

Chapter 6 System Design Worksheets


Release 5.0.x Turin Networks Page xiii

List of Tables

Item Page

Chapter 1 IntroductionChapter 2 Rack ConfigurationChapter 3 Compatibility

Table 3-1 Release 05.00.00 Shelf Compatibility.................................................................................................. 3-1Table 3-2 TE-2020 Release 05.00.00 Compatible Plug-in Units ......................................................................... 3-1

Chapter 4 Unit DetailsTable 4-1 TE-2020 Document List..................................................................................................................... 4-47Table 4-2 TN-Xpert Document List .................................................................................................................... 4-48Table 4-3 TE-206 Document List....................................................................................................................... 4-48Table 4-4 . Master CD Additional Products List................................................................................................. 4-48Table 4-5 . TN-Xpert Software and Licenses..................................................................................................... 4-49

Chapter 5 Ancillary EquipmentChapter 6 System Design Worksheets

Table 6-1 Example 1 - Stand-alone TE-2020 with OC-192 Interfaces and 4 OC-48 Tributary Drops ................. 6-1Table 6-2 Example 2 - Four Node OC-192 Network with Two Protected OC-48 Tributary Drops per Node....... 6-2Table 6-3 Example 3 - Stand-alone TE-2020 with OC-192 Interfaces and 192 DS3 Tributary Drops................. 6-2Table 6-4 Example 4 - Six Node OC-48 Ring with 12 DS3 Drops at Each Site .................................................. 6-3Table 6-5 Example 5 - Stand-alone TE-2020 with OC-192 Interface and 8 GbE Interfaces ............................... 6-3Table 6-6 Example 6 - Stand-alone TE-2020 with OC-48 Interfaces and 48 DS3 Drops.................................... 6-4Table 6-7 Example 7 - Stand-alone TE-2020 with OC-192 Interfaces,672 DS1 Drops, and 48 DS3 Drops ....... 6-5Table 6-8 Example 8 - Stand-alone TE-2020 with OC-48 Interfaces, 84 DS1 Drops, and 12 FastE Drops........ 6-6


Page xiv Turin Networks Release 5.0.x

Release 5.0.x Turin Networks Page 1-1

Chapter 1Chapter 1Chapter 1Chapter 1 Introduction Introduction Introduction Introduction

1.1 OverviewThis Ordering Guide outlines standard configurations and provides Release 5.0.0 ordering information for the TE-2020 system.

1.2 TE-2020 DescriptionThe TE-2020 system is a multi-service SONET platform capable of supporting optical SONET and various electrical interfaces. A flexible cross-connect allows the shelf to provide multiple connection types down to STS-1 level granularity. Traffic of all types, including FastE and GbE, can be merged onto a single fiber network with the TE-2020 system, all in a smaller form factor than other products on the market. For more information on Turin Networks TE-2020 features, see the TE-2020 Applications and Engineering Guide.

1.3 TE-206The TE-206 is a small multi-service platform based on the TE-2020 design to provide low-capacity drop capabilities (GbE, FastE, DS1, DS3) in an access environment. Since the TE-206 can function with other types of NEs and does not require a TE-2020, its ordering and product information is provided in seperate documents.For more information on Turin Networks TE-206 features, see the TE-206 Applications and Engineering Guide.

TraverseEdge 2020 Ordering Guide, Chapter 1: Introduction

Page 1-2 Turin Networks Release 5.0.x


Chapter 2Chapter 2Chapter 2Chapter 2 Rack Configuration Rack Configuration Rack Configuration Rack ConfigurationThis chapter describes the standard rack configuration for the TE-2020 network element, including the TE-2020 Main Shelf, OTS2, ETS1, and ETS2.

2.1 Rack DescriptionA standard 19" or 23" compliant rack is typically seven feet high and is used to house equipment stacked in standard configurations for testing and operations. The 19" rack has an inside mounting width of 17.72", and the 23" rack has an inside mounting width of 21.5". A typical rack may contain:

• Circuit Breaker / Alarm Panel (customer supplied)• TE-2020 Main Shelves (19” or 23”)• OTS2 Shelves (optional; 19” or 23”)• DS3/EC1 Tributary (ETS1) Shelves (optional; 19” or 23”)• ETS2 Shelves (optional; 19” or 23”)• Fiber Storage Trays (optional; 19” or 23”)

2.2 TE-2020 ShelvesThe TE-2020 Main Shelf is 3.47” tall requiring 2 RUs (rack unit = 1.75") in a standard 19" or 23" rack mount. The TE-2020 is the main shelf with the tributary shelves typically being located beneath it. The OTS2 Shelf is 3.47” tall requiring 2 RUs of rack space. The ETS1 and ETS2 are each 5.2” tall requiring 3 RUs of rack space. Each shelf is available in either 19" or 23" configurations from the factory.

2.3 Equipment LayoutThis section describes a typical configuration for a TE-2020 system in a central office rack. The rack lay-out for a 23" system consisting of a TE-2020 Main Shelf, an OTS2, an ETS1, and an ETS2 is shown in Figure 2-1

TraverseEdge 2020 Ordering Guide, Chapter 2: Rack Configuration


Figure 2-1 Typical 23" Shelf Installation Example

TraverseEdge 2020 Ordering Guide, Chapter 3: Compatibility


Chapter 3Chapter 3Chapter 3Chapter 3 Compatibility Compatibility Compatibility CompatibilityThis chapter defines the compatibility between Release 5.00.00 software and plug-in units available for the shelves.

3.1 Release 05.00.00

3.1.1 Shelves

The software Release 05.00.00 supports the shelves defined in Table 3-1 below.

3.1.2 Plug-in Units

The software Release 05.00.00 supports the plug-in units defined in Table 3-2 below.

Table 3-1 Release 05.00.00 Shelf Compatibility

Unit Name Catalog Number

TE-2020 Main Shelf - 19" WR-M2020-001-00000

TE-2020 Main Shelf - 23” WR-M2020-002-00000

OTS2 - 19” WR-TOPT2-001-00000

OTS2 - 23” WR-TOPT2-002-00000

DS3/EC1 Tributary Shelf - 19” WR-TDS30-001-00000

DS3/EC1 Tributary Shelf - 23” WR-TDS30-002-00000

ETS2 - 19” WR-TETS2-001-00000

ETS2 - 23” WR-TETS2-002-00000

Table 3-2 TE-2020 Release 05.00.00 Compatible Plug-in Units

Unit Name Catalog Number Issue

Common Control and Timing Cards

TE-2020 Main CCT WR-PCCT0-004-00000 02, 03

TE-2020 Main CCT WR-PCCT0-0A4-00000 01

TE-2020 Enhanced CCT WR-PCCTV-004-00000 0q, 02, 03, 04, 05, 06, 07, 08, 09

TE-2020 Main CCT w/2.5G VT Fabric WR-PCCTV-024-00000 01, 02, 03, 04, 05, 06, 07, 08, 09

TE-2020 Main CCT w/5G VT Fabric WR-PCCTV-054-00000 01, 02, 03, 04, 05, 06, 07, 08, 09

TE-2020 Main CCT w/5G VT Fabric WR-PCCTV-056-00000 01

TE-2020 Main CCT w/10G VT Fabric WR-PCCTV-106-00000 01



OTS2 CCT WR-PCCT0-005-00000 01

OTS2 CCT WR-PCCT0-0A5-00000 01

OTS2 Enhanced CCT WR-PCCTV-005-00000 02, 03, 04, 05, 06, 07, 08, 09

OTS2 CCT w/2.5G VT Fabric WR-PCCTV-025-00000 02, 03, 04, 05, 06, 07, 08, 09

OTS2 CCT w/5G VT Fabric WR-PCCTV-057-00000 01

DS3/EC1 Tributary CCT WR-PCCT0-002-00000 03

DS3/EC1 Tributary CCT WR-PCCT0-012-00000 01, 02, 03

ETS2 CCT WR-PCCT0-006-00000 01, 02, 03

Optical PLMs

OC-192 x1 LR 1550 PLM WR-19201-L01-55000 01, 02

OC-192 x1 IR 1550 PLM WR-19201-I01-55000 01, 02

OC-192 x1 SR 1310 PLM WR-19201-S01-31000 01, 02

OC-192 x1 25GHz Widely Tunable PLM WR-19201-T0W-52877 01, 02, 03

OC-192 x1 25GHz Widely Tunable ULR PLM WR-19201-T1W-52877 01, 02, 03

OC-48 x1 LR 1310 PLM WR-04801-L01-31000 01

OC-48 x1 IR 1310 PLM WR-04801-I01-31000 01, 02, 03, 04

OC-48 x1 LR 1550 PLM WR-04801-L01-55000 01

OC-48 x1 VR 1310 PLM WR-04801-V01-31000 01

OC-48 x2 IR 1310 PLM WR-04802-I01-31000 01

OC-48 x2 LR 1310 PLM WR-04802-L01-31000 01

OC-48 x1 SFP Base PLM WR-04801-SFP-00000 01

OC-48 x2 SFP Base PLM WR-04802-SFP-00000 01

OC-48 x1 DWDM 1528.77 SFP Stnd. Temp. WR-P048S-D01-52877 01




















































OC-48 x4 IR 1310 PLM WR-04804-I01-31000 01

OC-48 x4 LR 1310 PLM WR-04804-L01-31000 01

OC-48 x4 LR 1550 PLM WR-04804-L01-55000 01

OC-12 x2 IR 1310 PLM WR-01202-I01-31000 01, 02

OC-12 x2 LR 1310 PLM WR-01202-L01-31000 01

OC-12 x2 LR 1550 PLM WR-01202-L01-55000 01

OC-12 x4 IR 1310 PLM WR-01204-I01-31000 01, 02

OC-12 x4 LR 1310 PLM WR-01204-L01-31000 01

OC-12 x4 LR 1550 PLM WR-01204-L01-55000 01

OC-3 x4 SR MMF 1310 PLM WR-00304-M01-31000 01

OC-3 x4 IR 1310 PLM WR-00304-I01-31000 01, 02

OC-3 x4 LR 1310 PLM WR-00304-L01-31000 01

OC-3 x4 LR 1550 PLM WR-00304-L01-55000 01

1000Base-SX x2 MMF 850 PLM WR-GBE02-S01-85000 01

1000Base-LX x2 SMF 1310 PLM WR-GBE02-L01-31000 01

1000Base-ZX x2 SMF 1550 PLM WR-GBE02-Z01-55000 01

1000Base-SX x2 MMF 850 Enhanced PLM WR-GBE02-S11-85000 01

1000Base-LX x2 SMF 1310 Enhanced PLM WR-GBE02-L11-31000 01

1000Base-ZX x2 SMF 1550 Enhanced PLM WR-GBE02-Z11-55000 01

Electrical PLM

DS3/EC1 x12 PLM WR-DS312-001-00000 03

DS3/EC1 x12 PLM with Test Access WR-DS312-011-00000 01

DS3/EC1 x12 Transmux PLM WR-DS312-T11-00000 01, 02

DS1 x28 PLM WR-DS128-001-00000 01, 02, 03

DS1 x84 PLM WR-DS184-001-00000 01, 02, 03

FastE x12 PLM WR-FE012-001-00000 01, 02, 03

Fan Trays

TE-2020 Fan Tray WR-PFAN0-004-00000 01

OTS2 Fan Tray WR-PFAN0-005-00000 01





ETS Fan Tray WR-PFAN0-002-00000 03, 04

Fan Filters

2 RU Fan Filter WR-PFLTR-002-00000 01

2 RU Fan Filter x10 (10-pack) WR-PFLTR-X02-00000 01

3 RU Fan Filter WR-PFLTR-006-00000 01

3 RU Fan Filter x10 (10-pack) WR-PFLTR-X03-00000 01

User Interface Cable

Serial User Port Cable WR-CUSPT-002-00000 01

Blanks

Optical CCT Blank WR-PBLNK-001-00000 01

Optical PLM Blank WR-PBLNK-002-00000 01

DS3/EC1 PLM Blank WR-PBLNK-004-00000 02

OC-192 PLM Blank WR-PBLNK-005-00000 01

OC-192 x2 PLM Blank WR-PBLNK-007-00000 01

DS1/FE PLM Blank WR-PBLNK-006-00000 01

23” Chassis Filters

2 RU Chassis Filter WR-PFLTR-005-00000 01

3 RU Chassis Filter WR-PFLTR-006-00000 01

2 RU Chassis Filter x10 WR-PFLTR-X05-00000 01

3 RU Chassis Filter x10 WR-PFLTR-X06-00000 01

2 RU - 23" Chassis Filter Kit WR-KFLTR-2RU-00000 01

3 RU - 23" Chassis Filter Kit WR-KFLTR-3RU-00000 01






Chapter 4Chapter 4Chapter 4Chapter 4 Unit Details Unit Details Unit Details Unit DetailsThis chapter includes helpful descriptive information for use when determining the meaning of Turin Net-works part numbers and unit names.

4.1 TE-2020 ShelvesThe following tables provide names, descriptions, part numbers, and configuration requirements for each TE-2020 shelf. For additional information refer to the TE-2020 Applications and Engineering Guide (WR-D2020-APP-040000).

4.1.1 TE-2020 Main Shelf

TE-2020 Main Shelf - 19" and TE-2020 Main Shelf - 23"

Part Name TE-2020 Main Shelf

Description The 19" or 23" TE-2020 Main Shelf drives the functionality of the TE-2020 system. It houses a fan plug-in unit, Common Control and Timing (CCT) cards, an interconnect panel, user interfaces, OC-192 and other PLMs.

Requirement Required for all applications.

Catalog Numbers WR-M2020-001-00000 (TE-2020 Main Shelf - 19") includes cover door and mounting hardware (shown below).WR-M2020-002-00000 (TE-2020 Main Shelf - 23") includes cover door and mounting hardware.

Figure 4-1 TE-2020 Main Shelf - 19”

Required Plug-in Units TE-2020 Main Fan Tray

TE-2020 Main CCT

TraverseEdge 2020 Ordering Guide, Chapter 4: Unit Details


Optional Plug-in Units Optical PLMs(see Section 5.3 for details and part numbers)

OC-192 x1OC-48 x1OC-48 x2OC-48 x4OC-12 x2OC-12 x4OC-3 x4GbE x2OC-192 PLM BlankOC-192 x2 PLM BlankOptical PLM Blank

TE-2020 Main Shelf - 19" and TE-2020 Main Shelf - 23"



4.1.2 OTS2

OTS2 - 19" and OTS2 - 23”

Part Name OTS2

Description The 19" or 23" OTS2 provides additional optical add and drop access to the TE-2020 Main Shelf. It houses a fan plug-in unit, Common Control and Timing (CCT) cards, and PLMs.

Requirement Required for all applications utilizing optical ports in excess of the capabilities of the TE-2020 Main Shelf.

Catalog Number WR-TOPT2-001-00000 (OTS2 - 19”) includes cover door and mounting hardware (shown below). WR-TOPT2-002-00000 (OTS2 - 23”) includes cover door and mounting hardware.

Figure 4-2 OTS2 Shelf - 19”

Required Plug-in Units OTS2 Fan Tray

OTS2 CCT

LEI Cable Pair

OC-192 x2 PLM Blank

Optional Plug-in Units Optical PLMs(see section 5.3 for details and part numbers)

OC-48 x2OC-48 x1OC-12 x2OC-12 x4OC-3 x4GbE x2Optical PLM Blank



4.1.3 DS3/EC1 Tributary Shelf (ETS1)

DS3/EC1 Tributary Shelf - 19” and DS3/EC1 Tributary Shelf - 23”

Part Name DS3/EC1 Tributary Shelf (ETS1)

Description 19" or 23" ETS1, for TE-2020 with electrical tributaries (DS3/EC-1).

Requirement Required for all TE-2020 Main Shelves requiring electrical tributary interfaces.

Catalog Number WR-TDS30-001-00000 (DS3/EC1 Tributary Shelf -19") includes cover door and mounting hardware (shown below).WR-TDS30-002-00000 (DS3/EC1 Tributary Shelf - 23") includes cover door and mounting hardware.

Figure 4-3 DS3/EC1 Tributary Shelf - 19”

Required Plug-in Units DS3/EC1 Tributary CCT

ETS Fan Tray

LEI Cable Pair

Optional Plug-in Units DS3/EC1 x12 PLM

DS3/EC1 x12 PLM with Test Access

DS3/EC1 x12 Transmux PLM

DS3/EC1 PLM Blank



4.1.4 ETS2 Shelf

ETS2 - 19” and ETS2 - 23”

Part Name ETS2 Tributary Shelf

Description 19" or 23" ETS2, for TE-2020 with electrical tributaries (DS3/DS1/FastE).

Requirement Required for all TE-2020 Main Shelves requiring DS1 or FastE electrical tributary inter-faces.

Catalog Number WR-TETS2-001-00000 (ETS2 -19") includes cover door and mounting hardware (shown below).WR-TETS2-002-00000 (ETS2 - 23") includes cover door and mounting hardware.

Figure 4-4 ETS2 Shelf - 19”

Required Plug-in Units ETS2 CCT

ETS Fan Tray

LEI Cable Pair

Optional Plug-in Units DS3/EC1 x12 PLM with Test AccessDS3/EC1 x12 Transmux PLMDS1 x28 PLMDS1 x84 PLMFastE x12 PLMDS3/EC1 PLM BlankDS1/FE PLM Blank



4.2 Shelf Plug-in UnitsThe following tables provide names, descriptions, and part numbers for each plug-in unit available for the TE-2020 system. For additional information refer to the TE-2020 Applications and Engineering Guide (WR-D2020-APP-040000).

Caution: Electrostatic Discharge (ESD) sensitive devices. ESD can cause catastrophic fail-ure or degraded life and performance of a device. Use an anti-static wrist strap connected to a properly grounded source before contacting any electronic devices.

4.2.1 Fan Trays

The following tables provide information and part numbers for the fan trays utilized in each shelf.

TE-2020 Main Fan Tray

Part Name TE-2020 Main Fan Tray

Description The Fan Tray for the TE-2020 maintains the proper shelf operating temperature. It provides a front Ethernet port for a user interface, as well as visual system alarm indicators, and a field replaceable filter unit.

Requirement One per TE-2020 Main Shelf

Catalog Number WR-PFAN0-004-00000

Figure 4-5 TE-2020 Main Fan Tray

Required Plug-in Units 2 RU Fan Filter (one included with fan tray)



OTS2 Fan Tray

Part Name OTS2 Fan Tray

Description The Fan Tray for the OTS2 maintains the proper shelf operating temperature. It provides a front visual shelf alarm indication, and a field replaceable filter unit.

Requirement One per OTS2


Figure 4-6 OTS2 Fan Tray




ETS Fan Tray

Part Name ETS Fan Tray

Description Fan tray for ETS1 and ETS2 to maintain the proper shelf operating temperature. No user interfaces are provided on this fan assembly. A visual shelf indicator LED is provided on the faceplate.

Requirement One per ETS1 or ETS2


Figure 4-7 ETS Fan Tray




4.2.2 Common Control and Timing Cards

The following tables provide names, descriptions, and part numbers for Common Control and Timing (CCT) plug-in units available for the TE-2020 system. For additional information refer to the TE-2020 Appli-cations and Engineering Guide (WR-D2020-APP-040000).

Caution: Electrostatic Discharge (ESD) sensitive devices. ESD can cause catastrophic fail-ure or degraded life and performance of a device. Use an anti-static wrist strap connected to a properly grounded source before coming in contact with any elec-tronic devices.

TE-2020 Main CCTs

Part Name TE-2020 Main CCTs

Description Provides switch fabric, 2 plug-in slots for optical PLMs, shelf control, and timing recovery and distribution for the TE-2020 Main Shelf.

Requirement One for each TE-2020 Main Shelf. Two cards are required to provide protection.

Catalog Number WR-PCCTV-004-00000 TE-2020 Enhanced CCTWR-PCCTV-024-00000 TE-2020 Main CCT w/2.5G VT FabricWR-PCCTV-054-00000 TE-2020 Main CCT w/5G VT FabricWR-PCCTV-056-00000 TE-2020 Main CCT w/5G VT FabricWR-PCCTV-106-00000 TE-2020 Main CCT w/10G VT Fabric

Figure 4-8 TE-2020 Main CCT

Optional Plug-ins OC-48 x1OC-48 x2OC-12 x2OC-12 x4OC-3 x4GbE x2Optical PLM Blank





OTS2 CCTs

Part Name OTS2 CCTs

Description Provides switch fabric, shelf control, timing recovery and distribution, communica-tion with the main shelf, and 2 plug-in slots for the optical PLMs.

Requirement One for each OTS2 shelf. Two cards are required to provide protection.

Catalog Number WR-PCCTV-005-00000 OTS2 Enhanced CCTWR-PCCTV-025-00000 OTS2 Main CCT w/2.5G VT FabricWR-PCCTV-057-00000 OTS2 Main CCT w/5G VT Fabric

Figure 4-9 OTS2 CCT

Optional Plug-ins OC-48 x1OC-48 x2OC-12 x2OC-12 x4OC-3 x4GbE x2Optical PLM Blank



DS3/EC1 Tributary CCT

Part Name DS3/EC1 Tributary CCT

Description Controller card for DS3/EC1 Tributary Shelf (ETS1), provides the configuration and status interface to the TE-2020 Main Shelf.

Requirement Two per DS3/EC1 Tributary Shelf for redundancy.

Catalog Number WR-PCCT0-012-00000

Figure 4-10 DS3/EC1 Tributary CCT



ETS2 CCT

Part Name ETS2 CCT

Description Controller card for ETS2 shelf, provides the configuration and status interface to the TE-2020 Main Shelf.

Requirement Two per ETS2 shelf for redundancy.

Catalog Number WR-PCCT0-006-00000

Figure 4-11 ETS2 CCT



4.2.3 Blank Cover Panels

Blank cover panels are used to populate PLM slots that are not equipped with real PLMs. These are required to be placed in any blank slots to maintain proper system temperature and air flow. Refer to the following tables for descriptions and part numbers for each blank panel available for the TE-2020 shelves.

OC-192 PLM Blank

Part Name OC-192 PLM Blank

Description A cover panel used to close the front of the shelf to maintain proper air flow for tem-perature control. This panel covers one OC-192 PLM slot (right or left) in the lower section of the TE-2020 Main Shelf or an OTS2. An example of an OC-192 PLM Blank is shown below.

Requirement Required for all applications not utilizing a PLM in the OC-192 PLM slot.

Catalog Number WR-PBLNK-005-00000

Figure 4-12 OC-192 PLM Blank Cover Panel



OC-192 x2 PLM Blank

Part Name OC-192 x2 PLM Blank

Description A cover panel used to close the front of the shelf to maintain proper air flow for tem-perature control. This panel covers two OC-192 PLM slots (right and left) in the lower section of the TE-2020 Main Shelf or an OTS2. It has an air dam that redirects the airflow to the upper section of the shelf. This blank panel is used in TE-2020 shelves or OTS2s that do not require OC-192 PLMs, and must be used when the upper slots are equipped with DWDM PLMs. An example of an OC-192 x2 PLM Blank is shown below.

Requirement Required for all applications not utilizing a PLM in both OC-192 PLM slots.


Figure 4-13 OC-192 PLM Blank



Optical PLM Blank

Part Name Optical PLM Blank

Description A cover panel used to close the front of the shelf to maintain proper air flow for tem-perature control. This panel covers one PLM slot (right or left). An example of an Optical PLM Blank installed in a CCT PLM slot is shown below.

Requirement Required for all applications not utilizing a PLM in any optical PLM slot.


Figure 4-14 Optical PLM Blank



DS3/EC1 PLM Blank

Part Name DS3/EC1 PLM Blank

Description A cover panel used to close the front of the DS3/EC1 PLM slots in the ETS1 or ETS2 shelf to maintain proper air flow for temperature control. This panel covers one DS3/EC1 PLM slot.

Requirement Required for all applications not utilizing a DS3/EC1 PLM in a PLM slot.


Figure 4-15 DS3/EC1 PLM Blank



DS1/FE PLM Blank

Part Name DS1/FE PLM Blank

Description A cover panel used to close the front of the DS1/FastE PLM slots in the ETS2 shelf to maintain proper air flow for temperature control. This panel covers one DS1 or FastE PLM slot.

Requirement Required for all applications not utilizing a DS1 or FastE PLM in a PLM slot.


Figure 4-16 DS1/FE PLM Blank



4.2.4 Fan Filters

Each fan tray available for the various TE-2020 shelves requires a fan filter that must be replaced periodi-cally. Refer to the following tables for descriptions and part numbers of the filters available for the fan trays.

2 RU Fan Filter

Part Name 2 RU Fan Filter

Description A field replaceable filter for air intake located in the fan tray of the TE-2020 Main Shelf. The filter is marked for proper air flow direction. A kit of 10 filters is also available.

Requirement The fan filter should be replaced every six months under normal central office operating conditions.

Catalog Number WR-PFLTR-002-00000WR-PFLTR-X02-00000 (kit of 10 2-RU fan filters)

Figure 4-17 2 RU Fan Filter



3 RU Fan Filter

Part Name 3 RU Fan Filter

Description A field replaceable filter for air intake located in the fan tray of the ETS1 or ETS2. The filter is marked for proper air flow direction. A kit of 10 filters is also available.

Requirement The fan filter should be replaced every six months under normal central office operating conditions.

Catalog Number WR-PFLTR-003-00000WR-PFLTR-X03-00000 (kit of 10 3-RU fan filters)

Figure 4-18 3 RU Fan Filter



4.2.5 Chassis Filters

TE-2020 shelves configured for 23” rack installations in an environment with high (exceeding GR-63 speci-fications for environmentally controlled spaces) air contaminant levels require a chassis filter for each shelf. The chassis filter is installed on the left side (from the front) of the shelf expansion chamber. Refer to the following tables for descriptions and part numbers of the chassis filters available for the 23” rack con-figurations.

2 RU Chassis Filter

Part Name 2 RU Chassis Filter

Description A field replaceable filter assembly for air intake located on the left side of the TE-2020 Main Shelf or OTS2 shelf. The filter assembly snaps into place through the slots on the side of the 23” expansion. The filter may be replaced individually, retaining the filter housing. A kit of 10 filters is also available.

Requirement The chassis filter should be replaced every six months under normal central office operating conditions.

Catalog Number WR-KFLTR-2RU-00000 (2-RU chassis filter assembly with housing)WR-PFLTR-005-00000 (replacable 2-RU chassis filter only)WR-PFLTR-X05-00000 (kit of 10 2-RU chassis filters)

Figure 4-19 2 RU Chassis Filter



3 RU Chassis Filter

Part Name 3 RU Chassis Filter

Description A field replaceable filter assembly for air intake located on the left side of the ETS1 or ETS2. The filter assembly snaps into place through the slots on the side of the 23” expansion. The filter may be replaced individually, retaining the filter housing. A kit of 10 filters is also available

Requirement The chassis filter should be replaced every six months under normal central office operating conditions.

Catalog Number WR-KFLTR-3RU-00000 (3-RU chassis filter assembly with housing)WR-PFLTR-006-00000 (replacable 3-RU chassis filter only)WR-PFLTR-X06-00000 (kit of 10 3-RU chassis filters)

Figure 4-20 3 RU Chassis Filter



4.3 Physical Layer Modules (PLMs)The following tables provide names, descriptions, and configuration requirements of each PLM for the TE-

2020 system.

Danger: Invisible laser radiation in use. Avoid direct exposure to the beam. Never look into the end of an optical fiber. Serious and/or permanent damage to the eye or blind-ness can occur. Use of controls, adjustments, or procedures other than those spec-ified within this document may result in hazardous laser radiation exposure.

Caution: Electrostatic Discharge (ESD) sensitive devices. ESD can cause catastrophic fail-ure or degraded life and performance of a device. Use an anti-static wrist strap connected to a properly grounded source before contacting any electronic devices.

Caution! Care should be taken when inserting optical fibers into the optical PLMs. Ensure that optical power level input levels do not exceed the maximum input levels spec-ified for the PLM (See the TE-2020 Applications Engineering Guide (WR-D2020-APS-00000) for details). Input optical measurements must be taken and attenua-tion adjustments must be made before inserting the fibers, otherwise permanent damage could occur to the optical receivers. Damaged optical receivers due to application of power levels in excess of those defined in Turin Networks' specifica-tions are not covered by Turin Networks' product warranty.

NOTE: For short optical spans between nodes, an optical attenuator may be needed to reduce the power input to the IR modules.

4.3.1 OC-192 PLMs

Fixed Wavelength OC-192 PLMs

Unit Name Description Catalog Number Configuration

OC-192 x1 LR 1550 PLM Provides a single OC-192 Long Reach port with 1550nm laser.

WR-19201-L01-55000 Can utilize up to two per TE-2020 Main Shelf only. Single port, Single-Mode Fiber (SMF), -5° to 55° C (23° to 131° F), two SC connectors (TX/RX).

OC-192 x1 IR 1550 PLM Provides a single OC-192 Intermediate Reach port with 1550nm laser.

WR-19201-I01-55000

OC-192 x1 SR 1310 PLM Provides a single OC-192 Short Reach port with 1310nm laser.

WR-19201-S01-31000

Tunable OC-192 PLMs

Used to transmit one of 88 user selectable wavelengths on the ITU 50GHz grid per PLM. Can utilize up to two per TE-2020 Main Shelf only. Single port, Single-Mode Fiber (SMF), -5° to 40° C (23° to 104° F), two SC connectors (TX/RX).

OC-192 x1 25GHz Widely Tunable PLM

OC-192 1 Port PLM 88 Channel Tunable Transmitter (1528.77nm to 1563.45nm)

WR-19201-T0W-52877



OC-192 x1 25GHz Widely Tunable ULR PLM

OC-192 1 Port PLM 88 Channel Tunable Ultra Long Reach Transmitter (1528.77nm to 1563.45nm), intended for amplified multi-span systems

WR-19201-T1W-52877

Figure 4-21 OC-192 x1 PLM



4.3.2 OC-48 PLMs

OC-48 PLMs

Unit Name Description Catalog Number

Can utilize up to four per TE-2020 Main Shelf or OTS2. Single-Mode Fiber (SMF); -5° to +55° C (23° to +131° F), LC connectors for single-port cards, MPO connector for two-port cards.

OC-48 x2 IR 1310 PLM Provides two OC-48 Intermediate Reach ports with 1310nm laser.

WR-04802-I01-31000

OC-48 x2 LR 1310 PLM Provides two OC-48 Long Reach ports with 1310nm laser. WR-04802-L01-31000

OC-48 x4 IR 1310 PLM Provides four OC-48 Intermediate Reach ports with 1310nm laser.

WR-04804-I01-31000

OC-48 x4 LR 1310 PLM Provides four OC-48 Long Reach ports with 1310nm laser. WR-04804-L01-31000

OC-48 x4 LR 1550 PLM Provides four OC-48 Long Reach ports with 1550nm laser. WR-04804-L01-55000

OC-48 SFP Base PLMs


Can utilize up to four per TE-2020 Main Shelf or OTS2. Single-Mode Fiber (SMF); -5° to +55° C (23° to 131° F) for standard operating temperature SFP modules (except DWDMs which are 0-+40), -40° to +65° C (23° to 131° F) for extended temperature SFP modules, LC connectors for single-port cards. Utilizes SFP modules for optics. Refer to all SFPs listed below.

OC-48 x1 SFP Base PLM

Provides one OC-48 port with user selectable/field chang-able optical SFP module.

WR-04801-SFP-00000

OC-48 x2 SFP Base PLM

Provides two OC-48 ports with user selectable/field chang-able optical SFP module.

WR-04802-SFP-00000

OC-48 x1 IR 1310 SFP Provides one OC-48 port with 1310nm laser in extended temperature environments.

WR-P048E-I01-31000

OC-48 x1 LR-1 1310 SFP

Provides one OC-48 port with 1310nm laser in extended temperature environments.

WR-P048E-L01-31000

OC-48 x1 LR-2 1550 SFP Extnd Temp

Provides one OC-48 port with 1550nm laser in extended temperature environments.

WR-P048E-L01-55000

OC-48 x1 DWDM 1528.77 SFP Stnd. Temp.

A Small Form-factor Pluggable (SFP) module for the SFP Base PLM. One SFP used per card, provides a TX and RX port utilizing LC connections, 1528.77nm wavelength.

WR-P048S-D01-52877

OC-48 x1 SFP Modules (continued)




WR-P048S-D01-52955



WR-P048S-D01-53033





WR-P048S-D01-53112



WR-P048S-D01-53190



WR-P048S-D01-53268



WR-P048S-D01-53347



WR-P048S-D01-53425



WR-P048S-D01-53504



WR-P048S-D01-53582



WR-P048S-D01-53661



WR-P048S-D01-53740



WR-P048S-D01-53819



WR-P048S-D01-53898



WR-P048S-D01-53977



WR-P048S-D01-54056





WR-P048S-D01-54135





WR-P048S-D01-54214



WR-P048S-D01-54294



WR-P048S-D01-54373



WR-P048S-D01-54453



WR-P048S-D01-54532



WR-P048S-D01-54612



WR-P048S-D01-54692



WR-P048S-D01-54772



WR-P048S-D01-54851



WR-P048S-D01-54932



WR-P048S-D01-55012



WR-P048S-D01-55092



WR-P048S-D01-55172



WR-P048S-D01-55252







WR-P048S-D01-55333



WR-P048S-D01-55413



WR-P048S-D01-55494



WR-P048S-D01-55575



WR-P048S-D01-55655



WR-P048S-D01-55736



WR-P048S-D01-55817



WR-P048S-D01-55898



WR-P048S-D01-55979



WR-P048S-D01-56061



WR-P048S-D01-56142



WR-P048S-D01-56223

OC-48 x1 SFP Extended Temperature DWDMs

OC-48 x1 DWDM 1563.05 SFP


WR-P048S-D01-56305

OC-48 x1 DWDM 1528.77 SFP Extnd Temp


WR-P048E-D01-52877








Figure 4-25 OC-48 x1 SFP Base PLM



Figure 4-26 SFP Module



4.3.3 OC-12 PLMs

OC-12 PLMs


OC-12 x2 IR 1310 PLM Provides two OC-12 Inter-mediate Reach ports with 1310nm lasers.

WR-01202-I01-31000 Can utilize up to four per TE-2020 Main Shelf, or OTS2. UPSR or 1+1, Sin-gle-Mode Fiber (SMF), -5° to 55° C (23° to 131° F), Multi-path Push-On (MPO) connector.(Four-port card shown below.)

OC-12 x2 LR 1310 PLM Provides two OC-12 Long Reach ports with 1310nm lasers

WR-01202-L01-31000

OC-12 x2 LR 1550 PLM Provides two OC-12 Long Reach ports with 1550nm lasers

WR-01202-L01-55000

OC-12 x4 IR 1310 PLM Provides four OC-12 Inter-mediate Reach ports with 1310nm lasers.

WR-01204-I01-31000

OC-12 x4 LR 1310 PLM Provides four OC-12 Long Reach ports with 1310nm lasers.

WR-01204-L01-31000

OC-12 x4 LR 1550 PLM Provides four OC-12 Long Reach ports with 1550nm lasers

WR-01204-L01-55000




4.3.4 OC-3 PLMs

OC-3 PLMs


OC-3 x4 IR 1310 PLM Provides four OC-3 Interme-diate Reach ports with 1310nm lasers.

WR-00304-I01-31000 Can utilize up to 4 per TE-2020 Main Shelf or OTS2. UPSR or 1+1, Single-Mode Fiber (SMF), -5° to 55° C (23° to 131° F) operating range, Multi-path Push-On (MPO) con-nector.


WR-00304-L01-31000


WR-00304-L01-55000

OC-3 x4 SR MMF 1310 PLM

Provides four OC-3 Short Reach ports with Multi-mode 1310nm lasers.

WR-00304-M01-31000




4.3.5 GbE PLMs

GbE PLMs


1000Base-SX x2 MMF 850 PLM

1000Base-SX 2 Port PLM, MMF 850nm

WR-GbE02-S01-85000 Can utilize up to four per TE-2020 Main Shelf or OTS2. Provides two Giga-bit Ethernet ports over Single-Mode Fiber (SMF) or Multi-mode fiber (MMF), -5° to 55° C (23° to 131° F), Multi-path Push-On (MPO) connec-tor. Available in three reach variations.

1000Base-LX x2 SMF 1310 PLM

1000Base-LX 2 Port PLM, SMF 10Km 1310nm

WR-GbE02-L01-31000

1000Base-ZX x2 SMF 1550 PLM

1000Base-ZX 2 Port PLM, SMF 70Km 1550nm

WR-GbE02-Z01-55000

1000Base-SX x2 MMF 850 Enhanced PLM

1000Base-SX 2 Port VLAN enabled PLM, SMF 850nm

WR-GbE02-S11-85000

1000Base-LX x2 SMF 1310 Enhanced PLM

1000Base-ZX 2 Port VLAN enabled PLM, SMF 10Km 1310nm

WR-GbE02-L11-31000

1000Base-ZX x2 SMF 1550 Enhanced PLM

1000Base-ZX 2 Port VLAN enabled PLM, SMF 70Km 1550nm

WR-GbE02-Z11-55000

Figure 4-29 GbE x2 PLM



4.3.6 DS3/EC1 PLMs

DS3/EC1 PLM


DS3/EC1 x12 PLM Provides twelve DS3/EC-1 ports per card with monitor ports.

WR-DS312-001-00000 Can utilize up to 4 work-ing cards and one protect in each ETS1 for 1: N pro-tection (N <= 4), or 1 working and 1 protect in an ETS2 shelf. Refer to the TE-2020 Hardware Description Guide for more information.

DS3/EC1 x12 PLM with Test Access

Provides twelve DS3/EC-1 ports per card with intrusive test access ports.

WR-DS312-011-00000

DS3/EC1 x12 Transmux PLM

Provides twelve DS3/EC-1 ports per card with intrusive test access ports and supports multiplexing for VT cross connects.

WR-DS312-T11-00000 Can utilize up to 4 work-ing cards and one protect in each ETS1 for 1: N pro-tection (N <= 4), or 1 working and 1 protect in an ETS2 shelf. Refer to the TE-2020 Hardware Description Guide for more information.

Figure 4-30 DS3/EC1 x12 PLM



4.3.7 DS1 PLMs

DS1 PLMs


DS1 x28 PLM Provides 28 DS1 ports per card with test access ports.

WR-DS128-001-00000 Can utilize up to 2 work-ing cards and 2 protect cards in each ETS2 shelf with 1:1 protection. Refer to the TE-2020 Hardware Description Guide for more information.

DS1 x84 PLM Provides 84 DS1 ports per card with test access ports. (shown)

WR-DS184-001-00000 Can utilize up to 2 work-ing cards and 2 protect cards in each ETS2 shelf with 1:1 protection. Refer to the TE-2020 Hardware Description Guide for more information.

Figure 4-31 DS1 x84 PLM



4.3.8 FastE PLM

FastE PLM


FastE x12 PLM Provides 12 Fast Ethernet (10/100Mb/s) ports per card.

WR-FE012-001-00000 Can utilize up to 4 work-ing cards in each ETS2 Shelf depending on DS3 PLM equipment installed. Refer to the TE-2020 Hardware Description Guide for more informa-tion.

Figure 4-32 FastE x12 PLM



4.4 Cable and Fiber AssembliesThe following sections provide information regarding standard and custom cables that may be ordered for use with the TE-2020 system.

4.4.1 LEI Cables

The following tables provide descriptions and part numbers for Local Equipment Interface (LEI) cables, which are required for the installation of a tributary shelf. For additional information refer to the TE-2020 Applications and Engineering Guide (WR-D2020-APP-040000).

Local Equipment Interconnect (LEI) Cables

Part Name LEI Cable Pair

Description Local Equipment Interconnect cables used to connect the OTS2, ETS1, or ETS2 tributary shelves to the TE-2020 Main Shelf.

Requirement Required for all applications utilizing OTS2, ETS1, or ETS2 tributary shelves. One kit includes one Male-Male and one Female-Female cable. Different lengths are available to meet custom installation requirements. Listed below are the three standard lengths available. Cus-tom lengths may be ordered as required by inserting the desired length in place of the XXX in the part number WR-C0LEI-XXX-00000 (where XXX = XX.X meters in length, min 0.1m, max 10m).

Cable Name Catalog Number Description

LEI Cable Pair WR-C0LEI-015-00000 LEI Male-Male cable and Female-Female cable 1.5 meter length

WR-C0LEI-030-00000 LEI Male-Male cable and Female-Female cable 3.0 meter length

WR-C0LEI-100-00000 LEI Male-Male cable and Female-Female cable 10.0 meter length

Figure 4-33 LEI Cable Pair



4.4.2 Coax Cable


12x BNC-BNC Cable - XXm

BNC to BNC 735 Coax Cable w/ 12 conductors, 1 meter long. Provides 12 BNC equipped cables in one bundle.

WR-COAX1-0XX-00000 Customer defines cable length. Length in meters replaces the XX in the part number. See figure below for routing exam-ple ( 2, 5, 10, 20, 30m).

Figure 4-34 Type 735 12-Pack BNC-BNC Cable Bundle

24x BNC-BNC Cable - XXm

BNC to BNC 735 Coax Cable w/ 24 conductors, 1 meter long. Provides 24 BNC equipped cables in one bundle.

WR-COAX2-0XX-00000 Customer defines cable length. Length in meters replaces the XX in the part number. See figure below for routing exam-ple ( 2, 5, 10, 20, 30m).

Figure 4-35 Type 735 24-Pack BNC-BNC Cable Bundle



4.4.3 Fiber Cable

MPO Fiber Cables


2 Port PLM MPO Adapter Cables

Interconnects 2-port PLMs equipped with MPO type connectors to a fiber distri-bution panel. Standard lengths are 2 (002) ,5 (005), 10 (010), 20 (020), or 30 (030) meters. For custom lengths, replace XXX with the desired length in meters (min = 1m). Single Mode Fiber unless specified otherwise.

WR-MM1SC-XXX-00000 Male MPO to SC connector (Multi-mode fiber)

WR-MM1RJ-XXX-00000 Male MPO to MT-RJ connec-tor (Multi-mode fiber)

WR-MM1LC-XXX-00000 Male MPO to LC connector (Multi-mode fiber)

WR-MP1SC-XXX-00000 Male MPO to SC connector

WR-MP1FC-XXX-00000 Male MPO to FC connector

WR-MP1ST-XXX-00000 Male MPO to ST connector

WR-MP1LC-XXX-00000 Male MPO to LC connector

4 Port PLM MPO Adapter Cables

Interconnects 4-port PLMs equipped with an MPO type connector to a fiber distribution panel. Stan-dard lengths are 2 (002) ,5 (005), 10 (010), 20 (020), or 30 (030) meters. For custom lengths, replace XXX with the desired length in meters (min = 1m). For Single Mode Fiber.

WR-MP2SC-XXX-00000 Male MPO to SC connector

WR-MP2FC-XXX-00000 Male MPO to FC connector

WR-MP2ST-XXX-00000 Male MPO to ST connector

WR-MP2LC-XXX-00000 Male MPO to LC connector

Figure 4-36 Optical PLM MPO Adapter Cables



LC Fiber Cables


1 Port PLM LC Cables Interconnects PLMs or SFP modules equipped with LC or MT-RJ type connectors to a fiber distribution panel. Stan-dard lengths are 2 (002) ,5 (005), 10 (010), 20 (020), or 30 (030) meters. For custom lengths, replace XXX with the desired length in meters (min = 1m). For single mode fiber unless specified otherwise.

WR-LC0SC-XXX-00000 LC to SC cable adapter

WR-LC0FC-XXX-00000 LC to FC cable adapter

WR-LC0ST-XXX-00000 LC to ST cable adapter

WR-LC0LC-XXX-00000 LC to LC cable adapter

WR-LC0SC-XXX-00000 LC to SC cable adapter (Multi-mode fiber)

WR-LC0LC-XXX-00000 LC to FC cable adapter (Multi-mode fiber)

WR-LC0RJ-XXX-00000 LC to ST cable adapter(Multi-mode fiber)

Figure 4-37 Optical LC Adapter Cable

LC

CUSTOMER DEFINED

CONNECTOR ENDS

FC / LC / SC / ST

CUSTOMER DEFINED LENGTH

FIXED 6-INCH

1-PORT LCMX

MX

FIXED 24-INCH

SYS-0148-C



SC Fiber Cables


1 Port PLM SC Cables Interconnects PLMs equipped with SC type connectors to a fiber distribution panel. Stan-dard lengths are 2 (002) ,5 (005), 10 (010), 20 (020), or 30 (030) meters. For custom lengths, replace XXX with the desired length in meters (min = 1m). For single mode fiber.

WR-SC0SC-XXX-00000 SC to SC cable adapter.

WR-SC0FC-XXX-00000 SC to FC cable adapter

WR-SC0ST-XXX-00000 SC to ST cable adapter

WR-SC0LC-XXX-00000 SC to LC cable adapter

Figure 4-38 Optical PLM SC Adapter Cable



4.4.4 DS1 Cables


Unterminated DS1 Cable

Male Champ-64 to Wire-wrap DS1 cable.

WR-CDS1U-0xx-00000 Customer defines cable length. Length in meters replaces the XXX in the part number. See figure below for example (2, 5, 10, 20, 30 meters).

Figure 4-39 Unterminated DS1 Cable

Male Champ-64 to Male Champ-64 DS1 Cable

Male Champ-64 to Male Champ-64 DS1 cable.

WR-CDS1A-0xx-00000 Customer defines cable length. Length in meters replaces the XX in the part number. See figure below for example (2, 5, 10, 20, 30 meters.

Figure 4-40 Terminated DS1 Cable



4.4.5 FastE Cable


FastE Cable - Pan-duit Panel

Mini-Champ-50 to Champ-50 cable.

WR-CFE0P-0xx-00000 Customer defines cable length. Length in meters replaces the XXX in the part number. See figure below for example (min =1m, max = 10m).

Figure 4-41 FastE Cable



Serial User Port Cable


Serial User Port Commu-nication Cable

Provides a serial user con-nection to plug into the rear DB-9 connector on the TE-2020 Main Shelf, and a DB-9 (straight through) serial port at the opposite end for user devices. Cable is 10 feet long.

WR-CUSPT-002-00000 DB-9 female to DB-9 male

Figure 4-42 Serial User Port Cable



4.5 Kits The following kit is available for the TE-2020 system.

4.5.1 Fiber Cleaning Kit

Unit Name Description Catalog Number Contents

Fiber Cleaning Kit Kit containing all approved cleaning supplies for opti-cal connectors.

WR-KFIBR-001-00000 Kit includes 50 Cletop cleaning swabs and a single Universal Connector Cleaning Cassette.

Figure 4-43 Fiber Cleaning Kit



4.6 DocumentationThe following defines the part numbers and overviews for the document set available for the TE-2020 sys-tem.

TE-2020 Paper Document Set WR-D2020-PAP-00000A two binder volume set containing paper copies of all of the documents listed in Table 4-1 TE-2020 Document List below.

TE-206 Paper Document Set WR-D2006-PAP-00000A two binder volume set containing paper copies of all of the documents listed in Table 4-1 below.

TN-Xpert Paper Document Set WR-DXPRT-PAP-00000A a single binder containing paper copy of all of the documents listed in Table 4-2 below.

Turin Networks Product Documentation Master CD WR-DMSTR-CDR-00000A compact disc containing .pdf copies of all of the documents listed in Table 4-1 and Table 4-2 plus the other products listed in Table 4-3 and Table 4-4 below.

Table 4-1 TE-2020 Document List



TE-2020 Users Guide Provides information vital for proper operation and maintenance of Turin Net-works TE-2020 system. Information provided deals with processes and procedures for turn-up, test, maintenance duties, input command sequences, valid parameters, and expected responses in TL-1 and TN-Sight.

TE-2020 Applications and Engineering Guide

Provides information vital for proper deployment of a Turin Networks TE-2020 system. Information provided deals with environmental requirements, specifica-tions, and applications.

TE-2020 Hardware Installa-tion Guide

Provides information vital for proper installation of Turin Networks TE-2020 equipment. Information provided deals with site layout, required hardware, power connections, cable connections, and interfaces that must be hardwired.

TE-2020 TL-1 Reference Guide

Provides information vital for proper communication with Turin Networks TE-2020 system. Information provided deals with all TL-1 command structures, valid parameters, and expected responses, and error codes.

TE-2020 Hardware Descrip-tion Guide

Provides detailed information for each card, shelf and accessory for a Turin Net-works TE-2020 system. Information provided includes card level diagrams, opera-tional requirements, specifications, and applications.

TN-Sight Reference Guide Provides reference information for proper communication with the Turin Networks TE-2020 system using TN-Sight. Information provided familiarizes the user with all software menus, valid parameters, and screen snapshots.



Table 4-2 TN-Xpert Document List


TN-Xpert Installation and Administration Guide

Provides information required to properly install and maintain TN-Xpert Client and Server for both Solaris and Windows Environments. Information provided deals with Operation System configuration, database installation, user account con-figuration, TN-Xpert software installation and Network Element IP connectivity

TN-Xpert Users Guide Provides information vital for proper operation and maintenance of Turin Net-works TE-2020 system using TN-Xpert. Information provided deals with pro-cesses and procedures for turn-up, test, maintenance duties, input command sequences, and valid parameters.

Table 4-3 TE-206 Document List



TE-206 Users Guide Provides information vital for proper operation and maintenance of Turin Net-works TE-206 system. Information provided deals with processes and procedures for turn-up, test, maintenance duties, input command sequences, valid parameters, and expected responses using TN-Sight.

TE-206 Applications Engineering Guide

Provides information vital for the proper deployment of a Turin Networks TE-206 system. Information provided deals with environmental requirements, specifica-tions, and applications.

TE-206 Hardware Installation Guide

Provides information vital for proper installation of Turin Networks TE-206 equip-ment. Information provided deals with site layout, required hardware, power con-nections, cable connections, and interfaces that must be hardwired.

TE-206 TL-1 Reference Guide Provides information vital for proper communication with Turin Networks TE-206 system. Information provided deals with all TL-1 command structures, valid parameters, and expected responses, and error codes.

TE-206 Hardware Descrip-tion Guide

Provides detailed information for each card, shelf and accessory for a Turin Net-works TE-206 system. Information provided includes card level diagrams, opera-tional requirements, specifications, and applications.

TN-Sight Reference Guide Provides reference information vital for Turin Networks TE-206 system onboard web based GUI. Information provided deals with all software menus, valid param-eters, expected responses, and screen snapshots.

Table 4-4 . Master CD Additional Products List

Product Description

VLX1010 Documentation Set Turin Networks VLX1010 product documentation set.



4.7 TE-2020 System Software The software CD, WR-S2020-CDR-00000 R04.00.00 of the TE-2020 system, contains the following soft-ware files (refer to software Release Notes for any updated information):

• MAIN_R04.00.00 • OTS2_R04.00.00• DS3EC1TRIB_R04.00.00• ETS2_R04.00.00• Install.bin\Install.exe

4.8 TN-Xpert Element Management System SoftwareThe following table denotes the catalog numbers of the available software and license packages for the UNIX and PC based TN-Xpert element management system.

For the PC version of TN-Xpert, customers must first purchase the media WR-SXPRT-PC0-00000. Cus-tomers must then also order one of the following licenses to utilize the TN-Xpert software:

• WR-LXPRT-TTU-00000 - Temporary 90-day license to manage a single node• WR-LXPRT-032-00000 - License for managing up to 32 TE-2020 nodes• WR-LXPRT-PCM-00000 - Multi Client PC Licenses for up to 4 total Clients

Table 4-5 . TN-Xpert Software and Licenses

Unit Name Catalog Number Description

TN-Xpert PC Software WR-SXPRT-PC0-00000 TN-Xpert PC software on CDROM without license

TN-Xpert UNIX Software WR-SXPRT-UN0-00000 TN-Xpert UNIX software server and client on CDROM without license

TN-Xpert UNIX Base License WR-LXPRT-UNB-00000 TN-Xpert UNIX base license for zero nodes

TN-Xpert PC 90-day Temporary License

WR-LXPRT-TTU-00000 TN-Xpert PC 90-day license only

TN-Xpert PC License for 32 Nodes WR-LXPRT-032-00000 TN-Xpert PC license for 32 nodes

Multi Client PC Licenses WR-LXPRT-PCM-00000 Up to 4 total Clients

TN-Xpert UNIX License for 10 Nodes

WR-LXPRT-010-00000 TN-Xpert UNIX Add-on license for 10 nodes











For the UNIX versions of TN-Xpert, customers must first purchase the media WR-SXPRT-UN0-00000 and a base license described below.

• WR-LXPRT-UNB-00000 - Base license to use TN-Xpert (limited use, no nodes supported). Permits user to install the media onto their device.

Customers must then also order at least one of the following licenses to utilize the TN-Xpert interface:

• WR-LXPRT-XXX-00000 - Add-on to the base license. Supports 10, 25, 50, 100, or 200 nodes depending on the part number ordered. The XXX in the part number is replaced by a 3 digit num-ber representing the number of nodes needing support (i.e., XXX = 010 for 10 nodes, 025 for 25 nodes, etc.). Refer to Table 4-5 above.

Customers may then order additional add-on licenses to accommodate network growth. The total number of nodes that may be supported in a network is the sum of the licenses purchased.


Chapter 5Chapter 5Chapter 5Chapter 5 Ancillary Equipment Ancillary Equipment Ancillary Equipment Ancillary EquipmentThis section describes ancillary equipment that may be ordered from Turin Networks and utilized with the TE-2020 system.

5.1 Fiber Storage TrayTurin Networks strives to provide a total solution for each customers need. In doing this, we have selected a fiber storage and distribution panel that is only one RU tall and provides a user accessible pull out tray to easily access and route fibers from the equipment to the fiber distribution panel. One fiber storage panel is recommended for each optical shelf ordered.

Unit Name

Description Catalog Number Configuration

Fiber Storage Tray

Provides a storage solu-tion for excess fiber routed to the shelf. One tray is recommended for each optical shelf that requires fiber con-nections. Available for both 19" and 23" racks.

FMT-DRT07A00-C32P Equipped with SC/SC fiber connections, and designed to fit in a 19” rack space.

FMT-DRT02A00C-C32P Equipped with FC/FC fiber connections, and designed to fit in a 19” rack space.

FMT-DRT04A00C-C32P Equipped with ST/ST fiber connections, and designed to fit in a 19” rack space.

FMT-DRT07AA00H-D32P Equipped with SC/SC fiber connections, and designed to fit in a 23” rack space.

FMT-DRT02AA00H-D32P Equipped with FC/FC fiber connections, and designed to fit in a 23” rack space.

FMT-DRT04AA00H-D32P Equipped with ST/ST fiber connections, and designed to fit in a 23” rack space.

Figure 5-1 Fiber Storage Tray

TraverseEdge 2020 Ordering Guide, Chapter 5: Ancillary Equipment


5.2 DS1 Patch PanelOne DS1 patch panel is recommended for every 168 DS1 ports equipped in the ETS2.

Unit Name

Description Catalog Number Configuration

DS1 Patch Panel

Patch panel for DS1 interfaces

269759 One panel suggested for every 168 DS1 ports configured on an ETS2 equipped system. Bantam connections in the front and 64-pin Champ connections on the rear. The Champ-64 to Champ-64 DS1 cable should be used to connect the ETS2 to this patch panel.

Figure 5-2 DS1 Patch Panel

FRONT VIEW

REAR VIEW



5.3 FastE Patch PanelsOne FastE patch panel is recommended for each ETS2 ordered with FastE PLMs.


Configuration

24-port Ethernet patch panel

Provides 24 RJ-45 jacks.

269002 Use one 24-port panel for every two (2) FastE cards equipped in an ETS2 shelf.

48-port Ethernet patch panel

Provides 48 RJ-45 jacks.

269004 Use one 48-port panel for every four (4) FastE cards equipped in an ETS2 shelf.

Figure 5-3 FastE Patch Panels




Chapter 6Chapter 6Chapter 6Chapter 6 System Design Worksheets System Design Worksheets System Design Worksheets System Design WorksheetsThis chapter aids the user in identifying network configuration hardware requirements. The simple tables have a column for standard equipment needed for each shelf in a node. The user will specify what shelves are required and how many nodes are used in the network to determine a total count of all shelves, cards, and cables.

The following worksheets provide examples of eight standard 19” shelf configurations as listed here:

• Example 1 - Stand-alone TE-2020 with OC-192 Interfaces and 4 OC-48 Tributary Drops

• Example 2 - Four Node OC-192 Network with Two Protected OC-48 Tributary Drops per Node

• Example 3 - Stand-alone TE-2020 with OC-192 Interfaces and 192 DS3 Tributary Drops

• Example 4 - Six Node OC-48 Ring with 12 DS3 Drops at Each Site

•• Example 6 - Stand-alone TE-2020 with OC-48 Interfaces and 48 DS3 Drops

• Example 7 - Stand-alone TE-2020 with OC-192 Interfaces,672 DS1 Drops, and 48 DS3 Drops

• Example 8 - Stand-alone TE-2020 with OC-48 Interfaces, 84 DS1 Drops, and 12 FastE Drops

Table 6-1 Example 1 - Stand-alone TE-2020 with OC-192 Interfaces and 4 OC-48 Tributary Drops

Qty / Node

Part Catalog Number x Number of Identical Nodes

TotalQuantity

1 TE-2020 Main Shelf WR-M2020-001-00000

1

1

2 TE-2020 Main CCT WR-PCCT0-004-00000 2

1 TE-2020 Main Fan Tray WR-PFAN0-004-00000 1

2 OC-192 x1 SR 1310 PLM WR-19201-S01-31000 2

4 OC-48 x2 IR 1310 PLM WR-04802-I01-31000 4

TraverseEdge 2020 Ordering Guide, Chapter 6: System Design Worksheets


Table 6-2 Example 2 - Four Node OC-192 Network with Two Protected OC-48 Tributary Drops per Node

Qty / Node


TotalQuantity

1 TE-2020 Main Shelf WR-M2020-001-00000

4

4

2 TE-2020 Main CCT WR-PCCTv-004-00000 8


2 OC-192 x1 SR 1310 PLM WR-19201-S01-31000 8

2 OC-48 x2 IR 1310 PLM WR-04802-I01-31000 8

2 Optical PLM Blank WR-PBLNK-002-00000 8

Table 6-3 Example 3 - Stand-alone TE-2020 with OC-192 Interfaces and 192 DS3 Tributary Drops

Qty / Node

Part Catalog Number x Number of Nodes

Total Quantity

1 TE-2020 Main Shelf WR-M2020-001-00000

1

1



2 OC-192 x1 SR 1310 PLM WR-19201-S01-31000 2

4 DS3/EC1 Tributary Shelf WR-TDS30-001-00000 4

8 DS3/EC1 Tributary CCT WR-PCCT0-002-00000 8

4 ETS Fan Tray WR-PFAN0-002-00000 4

4 Local Equipment Interconnect (LEI) Cable Pair

WR-C0LEI-xxx-00000(xxx = 015 for 1.5 meter030 for 3 meters100 for 10 meters)

4

20 DS3/EC1 x12 PLM WR-DS312-001-00000 20



Table 6-4 Example 4 - Six Node OC-48 Ring with 12 DS3 Drops at Each Site

Qty / Node


Total Quantity

1 TE-2020 Main Shelf WR-M2020-001-00000

6

6



2 OC-48 x1 SFP Base PLM WR-04801-SFP-31000 12




1 Local Equipment Interconnect (LEI) Cable Pair


6

2 DS3/EC1 x12 PLM WR-DS312-001-00000 12

1 OC-192 x2 PLM Blank WR-PBLNK-007-00000 6


3 DS3/EC1 PLM Blank WR-PBLNK-004-00000 18

Table 6-5 Example 5 - Stand-alone TE-2020 with OC-192 Interface and 8 GbE Interfaces

Qty / Node


TotalQuantity

1 TE-2020 Main Shelf WR-M2020-001-00000

1

1

2 TE-2020 Main CCT WR-PCCTV-004-00000 2


2 OC-192 x1 SR 1310 PLM WR-19201-S01-31000 2

4 1000Base-LX x2 SMF 1310 PLM

WR-GBE02-L01-31000 4



Table 6-6 Example 6 - Stand-alone TE-2020 with OC-48 Interfaces and 48 DS3 Drops

Qty / Node


Total Quantity

1 TE-2020 Main Shelf WR-M2020-001-00000

1

1




2 Optical PLM Blank WR-PBLNK-002-00000

2 OC-48 x1 IR 1310 PLM WR-04801-I01-31000 2




1 Local Equipment Inter-connect (LEI) Cable Pair


1

5 DS3/EC1 x12 PLM WR-DS312-001-00000 5



Table 6-7 Example 7 - Stand-alone TE-2020 with OC-192 Interfaces,672 DS1 Drops, and 48 DS3 Drops

Qty / Node


Total Quantity

1 TE-2020 Main Shelf WR-M2020-001-00000

1

1



4 ETS2 - 19” WR-TETS2-001-00000 4

8 ETS2 CCT WR-PCCT0-006-00000 8





4

2 OC-192 x1 SR 1310 PLM WR-19201-S01-31000 2

8 DS3/EC1 x12 PLM WR-DS312-011-00000 8

16 DS1 x84 PLM WR-DS184-001-00000 16



Table 6-8 Example 8 - Stand-alone TE-2020 with OC-48 Interfaces, 84 DS1 Drops, and 12 FastE Drops

Qty / Node


Total Quantity

1 TE-2020 Main Shelf WR-M2020-001-00000

1

1



1 ETS2 - 19” WR-TETS2-001-00000 1

2 ETS2 CCT WR-PCCT0-006-00000 2




1


2 DS3/EC1 PLM Blank WR-PBLNK-004-00000 2


1 DS1/FE PLM Blank WR-PBLNK-006-00000 1

2 OC-48 x1 IR 1310 PLM WR-04801-I01-31000 2

2 DS1 x84 PLM WR-DS184-001-00000 2

1 FastE x12 PLM WR-FE012-001-00000 1

Visit our website at:www.turinnetworks.com

Release 5.0.x

TraverseEdge 2020 System Documentation

800-0016-50