Upload
lenhan
View
215
Download
1
Embed Size (px)
Citation preview
treecare prodUcts
CONTENTS
2 INTRODUCTION
3 IMPACT BLOCKS
4 HITCH CLIMBERS
5 PINTO’S
6 HUBS
7 ANCHOR RINGS
8 THIMBLES
9 ANSI CARABINERS
11 LOCKSAfE CARABINERS
14 SPECIALISED CARABINERS
15 DEVICES
19 NEW PRODUCTS
INTRODUCTION
2
Tree work sites can be demanding places: work at
height within complex 3D structures, heavy rigging
with impact loads and exposure to the elements.
Arborists need to be strong, ingenious and waterproof
to be productive! DMM continue to develop their
product range to help meet the requirements of this
fast moving, hard working industry. Working in close
cooperation with industry partners Treemagineers
Ltd, we have brought new concepts and advances
in product performance to tree care, by focusing on
the best of design, top quality materials and ground-
breaking manufacturing techniques.
DMM performance critical products are proudly made
in North Wales.
PhOTOgRaPh © TREEMagINEERS
Treemagineer Josephine hedgers, International TCC Women’s Champion.
GENERICFEATURES
> Rounded edges to cheekplates maintain low rope abrasion when rope is fed ‘unfair’
> fairlead flares help maintain high working efficiency
> Thrust surfaces increase tolerance to external loading of spindle and anchor pin
> Lightweight attachment sling facilitates hauling of block, sling and rope to the climber and helps with handling, in tree stowage and workshop storage
> Direct connection to cordage, the anchor slings helps ensure correct neighbour component compatibility
> High efficiency oilite bushings to reduce friction
> Colouring follows EU WLL protocol
> Individual serial marking
> Made in Wales, UK
33
ImpACTblOCkS
TECHNICAlSpECIFICATIONS
> CE certification to European Machinery Directive 2005
> Hot forged cheek plates in 6082-T6 aluminium for high strength to weight ratio
> CNC machined from 6082-T6
> Anodised to EN-12373-1:2001 Class I0EI sealed for corrosion protection
> Stainless Steel 303 hollow spindle [IMB-L]
> Stainless Steel anchor pin [IMB - S: 303, IMB - L: 17-4ph]
> Efficient and robust bronze self lubricating oilite bushings
> 6082-T6 aluminium alloy sheaves
SUGGESTEDAREASOFApplICATION
> Tree care – dismantling operations
> forestry – winching operations
> Rescue
Guidance specific to tree ‘dismantling operations’ can be found at www.treemagineers.com
SmAllImpACTblOCk
MINIMUM BREAKING STRENGTH (MBS) 200 kN
WORKING LOAD LIMIT (WLL) 40 kN
MAX ROPE DIAMETER 16 mm
CATALOGUE NO. IMB-S
MINIMUM BREAKING STRENGTH (MBS) 300 kN
WORKING LOAD LIMIT (WLL) 60 kN
MAX ROPE DIAMETER 20 mm
lARGEImpACTblOCk
CATALOGUE NO. IMB-L
Designed for use in the tree care industry when loads may be dropped into rigging with considerable impact forces.
The combination of high quality materials and advanced production processes has ensured a rope friendly, durable and robust product. During development, Impact Blocks have passed demanding dynamic, torsion and static testing regimes. The end result is a highly functional product with an impressive strength to weight ratio.
4
GENERICFEATURES
> ‘Textile friendly’ curves, high strength, low weight
> Rigging plate helps organise single or multiple attachments
> fairlead flares help maintain high working efficiency
> Rounded side plate edges maintain low rope abrasion when rope is fed ‘unfair’
> Compatible with most carabiner shapes and many textile connecting elements including rope and webbing
> Size of attachment holes reduce probability of unwanted rotation of locking carabiners
> Direct connection to textile components at the round edged attachment holes, to reduce system costs, increase lift height, minimise space required and enhance tolerance to torsion
> Side plate shape allows an autoblock knot to function when the rope approaches the sides as well as at the bottom of the pulley
> Tamperproof construction
>Individual serial marking
> Made in Wales, UK
DMM combined a small rigging plate with a pulley and produced a highly efficient Triple Attachment Pulley.
The hot forged attachment points enable creative configurations whilst allowing direct connection to textile components to save on weight and space.
TECHNICAlSpECIFICATIONS
> Certified to EN795B:1997 [Transportable temporary anchor devices]. EN12278:1998 [Pulleys]. NfPA 1983 [06Ed] Class L rating
> Side plates hot forged in 2014 T6 aluminium alloy for high strength to weight ratio
> Heat treated 17-4 PH stainless steel spindle
> Oilite bushing as standard or 6000-2RS series ball bearing in Rapide version
> Anodised to EN12373-1:2001 Class 10E1 for corrosion protection
TRIplEATTACHmENTpUllEyS
CATALOGUE NO. PUL100BLT (BRIGHT LIGHT TITANIUM) CATALOGUE NO. PUL100RD (RED)
STRENGTH 30 kN
DIMENSIONS (mm) 94 X 68 X 33
WEIGHT 118 g
FLARED TRIPLE ATTACHMENT PULLEY
TRIplEATTACHmENTpUllEy
TRIplEATTACHmENT(RApIDE)pUllEy
CATALOGUE NO. PUL100RAPIDE
STRENGTH 30 kN
DIMENSIONS (mm) 94 X 68 X 33
WEIGHT 120 g
RAPIDE TRIPLE ATTACHMENT PULLEY (BALLRACED)
SUGGESTEDAREASOFApplICATION
> Rescue
> fall Protection
> Tree care
> Lightweight rigging
> Stretcher suspension
> Temporary horizontal lifeline
Guidance specific to tree climbing applications can be found in ‘The Hitch Climber’s Guide to the Canopy’ at www.treemagineers.com/downloads.php
5
GENERICFEATURES
> fairlead flares and rounded cheek plate edges that help maintain high working efficiency
> Size of attachment holes reduce probability of locking carabiner rotation
> Direct connection to textile components at the rounded cross section of anchor holes and curved becket
> Textile connections can reduce system costs, increase lift height in mechanical advantage systems, and increase tolerance to torsion
> Compatible with DMM Ultra O and Boa carabiners
> Tamper proof construction
> Individual serial marking
> Made in Wales, UK
TECHNICAlSpECIFICATIONS
> CE Certified to EN795B:1997 [Transportable temporary anchor device] and EN12278:2007 [Pulley]. NfPA G rating
> Hot forged frame 7075 T6 aluminium for exceptional strength to weight ratio
> Heat treated 17-4 PH stainless steel spindle
> Oilite bushing [Pinto] or 6000-2RS series ball bearings [Pinto Rig]
> Anodised to EN12373-1:2001 Class 10E1
SUGGESTEDAREASOFApplICATION
> Rescue
> fall Protection
> Rigging
> Pre-assembled mechanical advantage systems
> Tree care
With hardly a straight line in sight, the hot forged curves make for a ‘textile friendly’ environment. Attachment points can be used for webbing, cordage and carabiners.
Spliced or stitched terminations can be made directly to the rounded cross section of the attachment holes or the curved becket. All sorts of wonderful configurations become possible!
STRENGTH 44 kN
DIMENSIONS (mm) 100 X 48 X 37
WEIGHT 124 g
pINTORIGpUllEy
pINTOpUllEyS
pINTOpUllEy
STRENGTH 36 kN
DIMENSIONS (mm) 90 X 43 X 32
WEIGHT 111 g
SpACERS
> An essential component for Pinto applications where textile connecting elements tend to compress the side plates
> Hole diameters 15mm
> Two widths 12mm and 14mm
CATALOGUE NO. PUL110
CATALOGUE NO. PUL120
CATALOGUE NO. PUL110-SPA
CATALOGUE NO. PUL120-SPA
6
GENERICFEATURES
> Helps organise single or multiple anchor systems
> Compatible with a wide range of hardware and textile connecting components
> ‘Textile friendly’ surfaces with large radii
> Inner ring is compatible with running rope[s] allowing hauling systems and backups to be very simply configured
> Outer bar is dimensioned for optimum carabiner configuration
> Slots allow carabiners to be ‘opposite and opposed’
> CNC machined from 7075 T6 aluminium for high strength to weight ratio
> Anodised to EN12373-1:2001 Class10E1 for corrosion protection
> CE certified to EN795B:1997 [Transportable temporary anchor devices] for use as PPE
> Individual serial marking
> Made in Wales, UK
AREASOFApplICATION
> Rescue
> fall Protection
> 2D and 3D rigging
> Stretcher suspension systems
>Tree care – dismantling operations
pERFORmANCE
> HUB108
> MBS: Slots 50kN: Inner Ring 80kN
> WLL: Slots 10kN: Inner Ring 16kN
> HUB175
> MBS: Slots 50kN: Inner Ring 150kN
> WLL: Slots 10kN: Inner Ring 30kN
DMM’s Rigging Hubs have a wide range of uses beyond carabiners. Designed to be textile friendly, webbing and rope will feel equally at home with our hubs.
DMM’s Hubs can manage multiple anchor systems. The textile friendly slots allow opposed connectors such as carabiners, prusik loops, webbing slings, and girth hitches to sit comfortably while the central hole accommodates a running rope and facilitates 3D rigging.
RIGGINGHUbS
lARGEHUb
DIMENSIONS (mm) 175 mm
WEIGHT 761 g
CATALOGUE NO. HUB175
DIMENSIONS (mm) 108 mm
WEIGHT 207 g
SmAllHUb
CATALOGUE NO. HUB108
ANCHORRINGS
7
GENERICFEATURES
> Helps organise single or multiple attachments
> Compatible with a wide range of hardware and textile connecting components
> four sizes – 26, 28, 34, 40 mm internal diameter
> 12 mm circular cross section is the optimum contact dimension for many carabiners
> Combines beautifully with DMM Revolver Locksafe carabiner to create a ‘swinging captive eye’
> Certified static and dynamic strengths
> Solid construction for good abrasion resistance
> Individual serial marking
> Made in Wales, UK
TECHNICAlSpECIFICATIONS
> CE Certified to EN795B:1997 [Transportable temporary anchor devices]
> CNC machined from 7075 T6 aluminium for high strength to weight ratio
> Anodised to EN12373-1:2001 Class 10E1
for corrosion protection
SUGGESTEDAREASOFApplICATION
> fall Protection
> Temporary Horizontal Lifelines
> Complex lightweight rigging
> Rescue
> Universal connection point
> Stretcher suspension systems
> Tree care
Certified anchor elements – simple and functional! DMM Anchor Rings are junctions which can accommodate a number of textile elements or up to four carabiners. A ‘must have’ bit of kit for anyone who works at height.
PRODUCT STRENGTH INTERNAL DIAMETER (mm) CATALOGUE NO.
26 mm RING 30 kN 26 mm R500-26
28 mm RING 30 kN 28 mm R500-28
34mm RING 30 kN 34 mm R500-34
40 mm RING 30 kN 40 mm R500-40
8
GENERICFEATURES
> Compatible with wire or textile ropes
> Textile friendly outer surfaces, entrance flares and rope channels
> Protects ropes and terminations against abrasion and tight bend radii
> Open sided rope channels permit inspection of cordage
> Low surface friction allows textile ropes to move efficiently
> Enables compact and simple mechanical advantage systems
> Helps equalize loads on both sides of the thimble
> Sized to allow rotation of most carabiner securing mechanisms
> Corrosion resistant
> 8mm thimble with tab doubles up as an emergency bottle opener!
SUGGESTEDAREASOFApplICATION
> Abrasion protection for rope and terminations
> Horizontal lifelines – torsion resistant supports and sliding attachment points
> Rigging and rescue - compact hauling systems
> Tree care - retrievable anchor systems
TECHNICAlSpECIFICATIONS
> Investment cast in 17-4 PH stainless steel combines high strength and hardness with excellent corrosion resistance
> Hand finished
> Electro polished
The humble thimble has evolved into a high strength, stylish, corrosion resistant, closed anchor component for rope of all types. Investment cast in the best of stainless steels, DMM Equalizing Thimbles have smooth surfaces throughout which are sought out by the most discerning cordage! for more information visit our website www.dmmprofessional.com
EqUAlIzINGTHImblES
S2900 - 6mm Weight 56 g
S2908 – 8mm Weight 86 g
S2908T – 8mm WITH TAB Weight 92 g
EqUALIzING THIMBLES
pERFORmANCE
> Minimum breaking strength for an equalizing thimble is dependent on the wire or textile rope connected to the thimble and termination strength. As an indication of potential strength, thimbles configured with high performance synthetic fibre rope have withstood 35kN (6mm) and 40kN (8mm) with only minor surface deformation.
UlTRADlOCkSAFEANSI
bENEFITS
> Klettersteig shape provides extra large internal volume and gate clearance
> Cold forged and fully heat treated aluminium for lightness and maximum strength
> Anodised to BS12373-2001 Class 10E1 Sealed for corrosion protection
> Particularly suitable for clipping safety lines and anchor points
> Individually marked for traceability
> Made in Wales, UK
all aNSI certified carabiners are also then certified to the requirements of CaN/CSa Z259.12-01(Class 7211-30)
9
ANSICARAbINERS
bENEFITS
> Perfect for use at the end of Lanyards
> Symmetrical body makes it the ideal biner for use with Belay Devices
> D shaped body maximises gate clearance
> Kelock nose for snag free connection
> I-Beam construction maximises strength to weight ratio
> Individually marked for traceability
> Made in Wales, UK
STRENGTH 28 kN
WEIGHT 99 g
CAPTIVE BAR OPTION YES
CATALOGUE NO. A337ANSI
En362:2004b/ EN362:2004/T ANSI z359.1(2007)
klETTERSTEIGlOCkSAFEANSI
STRENGTH 30 kN
WEIGHT 107 g
CAPTIVE BAR OPTION YES
CATALOGUE NO. A847ANSI
En362:2004b/ EN362:2004/T ANSI z359.1(2007)
bENEFITS
> Large HMS shape provides increased internal volume and gate clearance
> I Beam section for increased strength to weight ratio
> Patented Taperlock clean nose for increased gate push in and side resistance
> Hot forged and fully heat treated aluminium for lightness and maximum strength
> Anodised to BS12373-2001 Class 10E1 Sealed for corrosion protection
> Made in Wales, UK
bOAHmS30kNlOCkSAFEANSI
STRENGTH 30 kN
WEIGHT 115 g
CAPTIVE BAR OPTION YES
CATALOGUE NO. A907ANSI
En362:2004b/ EN362:2004/T ANSI z359.1(2007)
bENEFITS
> Captive eye provides predictable direction of load
> Patented Taperlock clean nose for increased gate push in and side resistance
> Hot forged and fully heat treated aluminium for lightness and maximum strength
> Anodised to BS12373-2001 Class 10E1 Sealed for corrosion protection
> Ideal for use as the end connector on a lanyard
> Individually marked for traceability
> Made in Wales, UK
10
CApTIvEEyElOCkSAFEANSI
STRENGTH 25 kN
WEIGHT 122 g
CATALOGUE NO. A917ANSI
EN362:2004/T ANSI z359.1(2007)
UlTImASCAFFOlDANSI
STRENGTH 38 kN
WEIGHT 443 g
CATALOGUE NO. A734ANSI
EN362:2004/T ANSI z359.1(2007)
SIDEwINDERlOCkSAFEANSI
bENEFITS
> Directional connector incorporating a swivel feature
> Patented Taperlock clean nose for increased gate push in and side resistance
> Hot forged and fully heat treated aluminium for lightness and maximum strength
> Anodised to BS12373-2001 Class 10E1 Sealed for corrosion protection
> Ideal for use as the end connector on a lanyard where twisting is a problem
> Recommended for use when connecting to a guided type fall arrestor
> Individually marked for traceability
> Made in Wales, UK
bENEFITS
> Very large overall dimensions provide maximum internal dimensions
> Hot forged and fully heat treated aluminium for ightness and maximum strength
> Anodised to BS12373-2001 Class 10E1 Sealed for corrosion protection
> Recommended for connecting to large anchor sections such as scaffolding
> Individually marked for traceability
> Made in Wales, UK
STRENGTH 30 kN
WEIGHT 235 g
CATALOGUE NO. A98K71ANSI
EN362:2004/T ANSI z359.1(2007)
bENEFITS
> Perfect for use at the end of Lanyards
> Symmetrical body makes it the ideal biner for use with belay devices
> D Shaped body maximises gate clearance
> Patented Taperlock clean nose for increased gate push in and side resistance
> I-Beam construction maximises strength to weight ratio
> Individually marked for traceability
> Made in Wales, UK
11
lOCkSAFECARAbINERS
bENEFITS
> Small Offset D shape provides a very lightweight but strong connector
> I Beam section for increased strength to weight ratio
> Keylock clean nose for snag free connection
> Hot forged and fully heat treated aluminium for lightness and maximum strength
> Anodised to BS12373-2001 Class 10E1 Sealed for corrosion protection
> Ideal for general use when weight saving is important
> Individually marked for traceability
> Made in Wales, UK
SHADOwlOCkSAFE
bENEFITS
> Offset D shape maximises gate clearance
> I Beam section for increased strength to weight ratio
> Keylock clean nose for snag free connection
> Hot forged and fully heat treated aluminium for lightness and maximum strength
> Anodised to BS12373-2001 Class 10E1 Sealed for corrosion protection
> Recommended for general use where weight saving and strength are important
> Individually marked for traceability
> Made in Wales, UK
zODIAC12mmlOCkSAFE
bENEFITS
> Klettersteig shape provides extra large internal volume and gate clearance
> fully heat treated aluminium for lightness and maximum strength
> Anodised to BS12373-2001 Class 10E1 Sealed for corrosion protection
> Patented Taperlock clean nose for increased gate push in and side resistance
> Particularly suitable for clipping safety lines and anchor points
> Individually marked for traceability
> Made in Wales, UK
klETTERSTEIGlOCkSAFE
UlTRADlOCkSAFE
STRENGTH 24 kN
WEIGHT 57 g
CATALOGUE NO. A307
EN362:2004/B
STRENGTH 28 kN
WEIGHT 84 g
CAPTIVE BAR YES
CATALOGUE NO. A337
EN362:2004/B / EN362:2004T
STRENGTH 32 kN
WEIGHT 84 g
CAPTIVE BAR YES
CATALOGUE NO. A827
EN362:2004/B / EN362:2004T
STRENGTH 27 kN
WEIGHT 100 g
CAPTIVE BAR YES
CATALOGUE NO. A847
EN362:2004/B / EN362:2004T
bENEFITS
> HMS shape provides large internal volume and gate clearance
> I Beam section for increased strength to weight ratio
> Patented Taperlock clean nose for increased gate push in and side resistance
> Hot forged and fully heat treated aluminium for lightness and maximum strength
> Anodised to BS12373-2001 Class 10E1 Sealed for corrosion protection
> Individually marked for traceability
> Made in Wales, UK
AEROHmSlOCkSAFE
12
bENEFITS
> Large HMS shape provides increased internal volume and gate clearance
> I Beam section for increased strength to weight ratio
> Keylock clean nose for snag free connection
> Hot forged and fully heat treated aluminium for lightness and maximum strength
> Anodised to BS12373-2001 Class 10E1 Sealed for corrosion protection
> Individually marked for traceability
> Made in Wales, UK
bOAHmS25kNlOCkSAFE
SENTINEllOCkSAFE
bENEFITS
> Small ergonomic shape gives wide gate clearance for a compact connector
> I Beam section for increased strength to weight ratio
> Patented Taperlock clean nose for increased gate push in and side resistance
> Hot forged and fully heat treated aluminium for lightness and maximum strength
> Anodised to BS12373-2001 Class 10E1 Sealed for corrosion protection
> Recommended for general use
> Individually marked for traceability
> Made in Wales, UK
bENEFITS
> Oval shape allows central positioning of devices
> I Beam section for increased strength to weight ratio
> Keylock clean nose for snag free connection
> Hot forged and fully heat treated aluminium for lightness and maximum strength
> Anodised to BS12373-2001 Class 10E1 Sealed for corrosion protection
> Recommended for use with pulleys and as a general connector
> Individually marked for traceability
> Made in Wales, UK
UlTRAOlOCkSAFE
STRENGTH 25 kN
WEIGHT 87 g
CAPTIVE BAR YES
CATALOGUE NO. A897
EN362:2004/B / EN362:2004T
STRENGTH 25 kN
WEIGHT 71 g
CAPTIVE BAR YES
CATALOGUE NO. A327
EN362:2004/B / EN362:2004T
STRENGTH 24 kN
WEIGHT 60 g
CATALOGUE NO. A267
EN362:2004/B
STRENGTH 24 kN
WEIGHT 91 g
CATALOGUE NO. A367
EN362:2004/B
bENEFITS
> Large HMS shape provides increased internal volume and gate clearance
> I Beam section for increased strength to weight ratio
> Patented Taperlock clean nose for increased gate push in and side resistance
> Hot forged and fully heat treated aluminium for lightness and maximum strength
> Anodised to BS12373-2001 Class 10E1 Sealed for corrosion protection
> Individually marked for traceability
> Made in Wales, UK
bENEFITS
> Captive eye provides predictable direction of load> Patented Taperlock clean nose for increased gate push in and side resistance> Hot forged and fully heat treated aluminium for lightness and maximum strength > Anodised to BS12373-2001 Class 10E1 Sealed for corrosion protection> Ideal for use as the end connector on a lanyard
> Individually marked for traceability> Made in Wales, UK
bOAHmS30kNlOCkSAFE
13
STRENGTH 25 kN
WEIGHT 104 g
CATALOGUE NO. A917
EN362:2004/T
CApTIvEEyElOCkSAFE
SIDEwINDERlOCkSAFE
bENEFITS
> Directional connector incorporating a swivel feature
> Patented Taperlock clean nose for increased gate push in and side resistance
> Hot forged and fully heat treated aluminium for lightness and maximum strength
> Anodised to BS12373-2001 Class 10E1 Sealed for corrosion protection
> Ideal for use as the end connector on a lanyard where twisting is a problem
> Recommended also for use when connecting to a guided type fall arrestor
> Individually marked for traceability
> Made in Wales, UK
bENEFITS
> Unique and legendary connector incorporates low friction roller system
> I Beam section for increased strength to weight ratio
> Keylock clean nose for snag free connection
> Hot forged and fully heat treated aluminium for lightness and maximum strength
> Anodised to BS12373-2001 Class 10E1 Sealed for corrosion protection
> Recommended for special applications including rescue and hoisting
> Individually marked for traceability
> Made in Wales, UK
REvOlvERlOCkSAFE
STRENGTH 24 kN
WEIGHT 70 g
CATALOGUE NO. A277
EN362:2004/B
STRENGTH 30 kN
WEIGHT 97 g
CAPTIVE BAR YES
CATALOGUE NO. A907
EN362:2004/B / EN362:2004T
STRENGTH 30 kN
WEIGHT 235 g
CATALOGUE NO. A98K71
EN362:2004/T
bENEFITS
> HMS shape provides large internal volume and gate clearance
> I Beam section for increased strength to weight ratio
> Patented Taperlock clean nose for increased gate push in and side resistance
> Hot forged and fully heat treated aluminium for lightness and maximum strength
> Anodised to BS12373-2001 Class 10E1 Sealed for corrosion protection
> Recommended as a belaying carabiner in conjunction with dynamic nylon ropes
> Patented Belay Master prevents any cross loading possibility
> Individually marked for traceability
> Made in Wales, UK
bENEFITS
> Cold forged and fully heat treated carbon steel for high strength and durability
> Zinc plated to EN ISO 2081:2008 fE/ZN5C standard for corrosion protection
> Recommended for connecting to large anchor sections such as scaffolding
> Individually marked for traceability
> Made in Wales, UK
bENEFITS
> Klettersteig shape provides extra large internal volume and gate clearance
> 12 mm bar section for maximum strength
> Cold forged and fully heat treated carbon steel for high strength and durability
> Zinc plated to EN ISO 2081:2008 fE/ZN5C standard for corrosion protection
> Particularly suitable for clipping safety lines and anchor points
> Individually marked for traceability
> Made in Wales, UK
bElAymASTER
klETTERSTEIG12mmlOCkSAFE
14
SmAllSCAFFOlDkwIklOCk
STRENGTH 45 kN
WEIGHT 652 g
CAPTIVE BAR OPTION YES
CATALOGUE NO. C113
EN362:2004/T
EN362:2004/T
STRENGTH 25 kN
WEIGHT 92 g
CATALOGUE NO. A872
SpECIAlISEDCARAbINERS
REvOlvERwIREGATE
bENEFITS
> Unique and legendary connector incorporates low friction roller system
> I Beam section for increased strength to weight ratio
> Hot forged and fully heat treated aluminium for lightness and maximum strength
> Anodised to BS12373-2001 Class 10E1 Sealed for corrosion protection
> Recommended for special applications including rescue and hoisting
> Individually marked for traceability
> Made in Wales, UK
STRENGTH 45 kN
WEIGHT 282 g
CAPTIVE BAR YES
CATALOGUE NO. C847
EN362:2004/B / EN362:2004T
EN12275:1998 / UIAA121:2009
STRENGTH 24 kN
WEIGHT 51 g
CATALOGUE NO. A238
bENEFITS
> Stainless steel cam> Durable> Use on ropes with a diameter of more than 8.5mm> Ideal self rescue
bENEFITS
> Can be used on both nylon slings and ropes> New shaped cam and new forged side plates> Use on ropes with a diameter of more than 7.7mm> Ideal self rescue
15
ANkADESCENDER
CATALOGUE NO. DSD30/25
COLOURS BLACK
WEIGHT 340 g
CE0123 EN567COLOURS BLACK/SILVER
STRENGTH 30 kN
WEIGHT 118 g
CATALOGUE NO. A1100
COLOURS SILVER
STRENGTH 30 kN
WEIGHT 118 g
CATALOGUE NO. DSD30/25
CE0123 EN567
DEvICES
bENEFITS
> Classic figure of 8 shape provides smooth controllable descent> Anodised to BS12373-2001 Class 10E1 Sealed for corrosion protection
DOUblESTOpSINGlEROpEDESCENDER
bENEFITS
> Anthron Double Stop Single rope descender features panic function suitable for suspended work positioning, self evacuation and rescue operations> Anodised to BS12373-2001 Class 10E1 Sealed for corrosion protection
FIGUREOFEIGHT
bENEFITS
> Anka version with 90° connection point and ‘horns’ allows preferred > Anodised to BS12373-2001 Class 10E1 Sealed for corrosion protection
ROpEmAN
COLOUR GUN METAL
ROPE 10/11 mm
WEIGHT 62 g
STRENGTH 15 kN
ROPEMAN 1
CE EN UIAA standard : 567/126
bENEFITS
> alloy cam> Light and easy to use> Use on ropes with a diameter of more than 10mm> Ideal self rescue
COLOUR GOLD
ROPE 8.5/11 mm
WEIGHT 85 g
STRENGTH 15 kN
ROPEMAN 2
CE EN UIAA standard : 567/126
COLOUR RED
ROPE 7.7/11 mm
WEIGHT 70 g
STRENGTH 15 kN
ROPEMAN 3
CE EN UIAA standard : 567/126
bENEFITS
> Anthron Handled ascenders provide comfortable gloved hand operation
> The chest ascender is used as a link between the sit and chest harnesses. Geometry of the ascender ensures good jamming and loosening of the rope.
> Operate on dynamic and static ropes from 8 mm-13 mm diameter
16
bENEFITS
> Anthron Handled ascenders provide comfortable gloved hand operation
> Available in left and right hand units
> Operate on dynamic and static ropes from 8 mm-13 mm diameter
HANDlEDASCENDERS
RIGHTHANDGRIpASCENDER
DIMENSIONS (mm) 197 x 93 x 23
WEIGHT 205 g
CATALOGUE NO. AD-10
EN567
DIMENSIONS (mm) 197 x 93 x 23
WEIGHT 205 g
CATALOGUE NO. AL-15
EN567
bENEFITS
> free following for protection both and up and down a safety line
> Hot forged 6082 T6 aluminium side plates provide strength and durability
> Constant cam angle provides smooth and reliable operation
> Simple ergonomic shape is easily maintainable
> Anodised to BS12373-2001 Class 10E1 Sealed for corrosion protection
> Recommended for applications requiring a back up device
> Designed to operate on nylon rope conforming to EN1891:1998
> Individually marked for traceability
> Made in Wales, UK
bUDDy
bUDDy100
DIMENSIONS (mm) 95 x 78 x 28.5
WEIGHT 192 g
CATALOGUE NO. BUD100
EN353:2002 SUITABLE FOR 10 - 11 mm
DIMENSIONS (mm) 95 x 78 x 28.5
WEIGHT 192 g
CATALOGUE NO. BUD200
EN353:2002 ANSI z359.1(07) SUITABLE FOR 11 - 13 mm
bUDDy200
lEFTHANDGRIpASCENDER
CHESTASCENDERS
DIMENSIONS (mm) 118 x 77 x 27
WEIGHT 141 g
CATALOGUE NO. AC-30
EN567
ROpEpROTECTOR
STRENGTH 30 kN
DIMENSIONS (mm) 94 X 52.5 X 35
WEIGHT 144 g
CATALOGUE NO. PUL210
SINGlEATTACHmENTSINGlESHEAvE
17
pUllEyS
SINGlEATTACHmENTDOUblESHEAvE
STRENGTH 30 kN
DIMENSIONS (mm) 94 X 52.5 X 57.5
WEIGHT 249 g
CATALOGUE NO. PUL211
DOUblEATTACHmENTSINGlESHEAvE
STRENGTH 30 kN
DIMENSIONS (mm) 127 X 52.5 X 35
WEIGHT 169 g
CATALOGUE NO. PUL220
DOUblEATTACHmENTDOUblESHEAvE
STRENGTH 30 kN
DIMENSIONS (mm) 127 X 52.5 X 57.5
WEIGHT 281 g
CATALOGUE NO. PUL221
bENEFITS
> 4 mm 2014 T6 aluminium side plates provide strength and durability
> Heat treated 174PH stainless steel spindles for high strength and corrosion resistance
> Pre lubricated sintered bronze bearings for ultra smooth operation
> Riveted and tamperproof assembly
> Anodised to BS12373-2001 Class 10E1 Sealed for corrosion protection
> Recommended for general pulley applications
> Individually marked for traceability
> Made in Wales, UK
wIRElANyARD
CATALOGUE NO. SPWS010
EN 354
LENGTH 1 METRE
CATALOGUE NO. SPWS015
EN 795:1997
LENGTH 1.5 METRES
CATALOGUE NO. SPWS020
EN 795:1997
LENGTH 2 METRES
> Alternative lengths also available
> for more information please visit our website www.dmmprofessional.com
18
NylONSlINGS
DyNEEmASlINGS
SlINGSANDTApES
DAISyCHAINS
TOOlbAGS
> The Trad and Strone come in a variety of contemporary colours and fabrics.
PRODUCT NAME STRENGTH PRODUCT NO. COLOURS
Q/D set Dyneema 11mm - 12 cm
Q/D SET NYLON 16MM - 12 cm
DYNEEMA SLING 11 mm x 30 cm 22 kN SP1130 MIXED
DYNEEMA SLING 11 mm x 60 cm 22 kN SP1160 MIXED
DYNEEMA SLING 11 mm x 120 cm 22 kN SP11120 MIXED
NYLON SLING 16 mm x 30 cm 22 kN MA1660 GOLD + GREY EDGE/ GREY + GOLD EDGE
NYLON SLING 16 mm x 60 cm 22 kN MA1690 GOLD + GREY EDGE/ GREY + GOLD EDGE
NYLON SLING 16 mm x 120 cm 22 kN MA16120 GOLD + GREY EDGE/ GREY + GOLD EDGE
NYLON SLING 16 mm x 240 cm 22 kN MA16240 GOLD + GREY EDGE/ GREY + GOLD EDGE
NYLON SLING 26 mm x 60 cm 30 kN MA2660 BLUE
NYLON SLING 26 mm x 120 cm 30 kN MA26120 BLUE
NYLON SLING 26 mm x 240 cm 30 kN MA26240 BLUE
RIPSTOP 22 kN 25RSDLL19
DAISY CHAIN 135 cm RED 22 kN DC135RD RED
DAISY CHAIN 135 cm BLUE 22 kN DC135BL BLUE
11mmWHITE
16mmGOLD
26mmBLUE
RIpSTOp
DMM makes every effort to ensure the information in this catalogue is correct and up to date. However we reserve the right to change product specification when or if deemed necessary.
Whilst every effort is made to ensure the information held within this brochure is accurate, DMM International cannot be held responsible for any inaccuracies or omissions.
© 2011 DMM ENGINEERING / INTERNATIONAL LTD
19
DmmClImbING
The Rock Climbing Products Catalogue 2011 details DMM’s comprehensive collection of climbing and mountaineering hardware and software, including aluminium carabiners and quickdraws, passive and active protection, abseil and belay devices as well as a selection of sewn and soft goods. There are obviously areas of overlap between the two parts of the company, as well as areas of specialism, but the end result is a comprehensive range of specialist equipment to cover every eventuality.
If you would like a copy of the DMM Climbing Products Brochure please contact Chris or Kat at DMM or you can download a pdf from www.dmmwales.com.
NEwpRODUCTS
RATED STRENGTH kN RATED STRENGTH lbs
22 4932
23 5157
24 5381
25 5605
26 5829
27 6053
28 6278
29 6502
30 6726
32 7174
38 8520
40 8968
45 10089
50 11210
200 44840
300 67260
CONvERSION TABLE: kN - Ibs
Printed on Greencoat Velvet, produced with 80% recovered fibre and 20% virgin fibre sourced from sustainable forests. Laminated using fully biodegradable, cellulose based laminate.
General enquiries: +44 [0]1286 873 502Fax: +44 [0]1286 872 090email: [email protected]
DMM InternatIonaL
LLanberis, Gwynedd
waLes, United KinGdom
LL55 4eL
Designed by Fathom Creative, Manchester.
treecare prodUcts
www.dmmwales.cOm
treemaGineers Ltd
daLL store
rannoch station
ph17 2Qh
scotLand Gb