Trelleborg Queensland Rubber Pty Ltd PO Box 484, Virginia, QLD 4014, Australia. Street address: 515 Zillmere Rd, Zillmere, QLD 4034

Phone: +61 7 3866 7444 Fax: +61 7 3263 4912 Email: info@qldrubber.com.au A.C.N: 009 674 195

ENGINEERED SYSTEMS

LAMINATES PRODUCT INFORMATION SHEET

VITON

Description

FKM or VITON® or Fluorcarbonate rubber. This is a hexafluoropropylene vinylidene fluoride.

Properties

• Extraordinary resistance to heat ,in continuous heat of up to 250ºC and intermittent heat of up to 300ºC. • Satisfactory resistance to low temperatures (-30ºC / –50ºC) • Self-extinguishing and resistance to ozone and the elements is practically unlimited. • Excellent compression set in compression at high temperatures. • Resistance to chemicals; of all the other synthetic rubbers these are the most resistant to hydrocarbons, aliphatic as well as aromatics and chlorinated. Extremely resistant to alkalies, including oxidants. On the other hand ethers and cetones cause considerable swelling.

FKM rubber (VITON ® ): BLACK

Dens. Hardness Tens.Stren. Elong. Compres. Set.

Ref. g/cm3 Sh.A kg/cm2 % C h %

Working Temperature.

V725 1.80 70 85 200 180 70 40 -30/250

V737 2.03 70 70 220 175 70 62 -30/250

V733 1.98 72 50 250 180 70 90 -10/250

V726 1.78 75 80 190 180 70 44 -30/250 V736 2.24 80 50 190 180 70 90 -30/250

V025 1.80 70 85 200 180 70 40 -30/250

V037 2.03 70 70 220 175 70 62 -30/250

V033 1.98 72 50 250 180 70 90 -10/250 V026 1.78 75 80 190 180 70 44 -30/250

V036 2.24 80 50 190 180 70 90 -30/250

® Trademark registered by Dupont Dow Elastomer