TTC Timmler Technology DRAINAGE · Linear gratings as covers | Detailed information in the »Homogeneous Gratings Design« brochure TTC KST TTC KSM-V Material: Aluminium Bar layout:

DRAINAGE

FAÇADE/DRAINAGE CHANNELSSolutions for external useWith or without LED-illumination and linear gratings

TTC Timmler Technology

Design integrity, down to the finest detailModern architecture thrives on aesthetically integrating individual construction elements into a uniform appearance. Modern glass façades, in particular, benefit from TTC’s Grating Design and allow you to harmoniously design the transition between interior and exterior areas.

TTC drainage channels ensure reliable, invisible drainage and can be combined with a variety of individually modifiable comb gratings.

TTC drainage channels can be combined in a variety of ways – as façade channels with homogeneous grating covers, with illumi nation, with mats for entrance areas.

CHANNELS AND GRATING

DRAINAGEDesign-oriented innovationsfor a homogeneous façade design

2

Subj

ect t

o te

chni

cal c

hang

es ·

Issu

ed 1

1/20

15

TTC KSF

Linear gratings as covers | Detailed information in the »Homogeneous Gratings Design« brochure

TTC KST TTC KSM-V

Material: Aluminium

Bar layout: Lengthwise direction

Bar spacing: 5, 10 or 15 mm

Finishes: E6/EV1 anodised or RAL coated (standard RAL 9010, RAL 7035)

Safe to walk on | Safe to drive over: See channels

Radial design upon request

Material: Aluminium, stainless steel or steel

Bar layout: Lengthwise or cross direction

Bar spacing: 5, 10 or 15 mm

Finishes: Aluminium: E6/EV1 anodised or RAL coated (standard RAL 9010, RAL 7035) V2A: raw, stained, electropolished or grain polished, burnished black



Material: Stainless steel or steel

Bar layout: Lengthwise or cross direction

Bar spacing 5, 7 or 10 mm

Finishes: Stained, grain polished or polished, burnished black, galvanized




WE UNDERSTAND ARCHITECTS

DRAINAGECustom-fit, precise,affordable

3

Good design you can affordGood Design does not have to be expensive – sometimes it is enough to use a different material to realize a good design idea at an affordable price.

We develop objectspecific, customfit solutions together with the architect and the client; precise production of channels and gratings made for a specific application guarantees troublefree use in the daily construction work. Producing in axial dimensions and identical bar spacing of the gratings down to the channel edge comes as standard for us.

For a detailed description of the gratings please see our »Homogeneous Gratings Design« brochure.


Subj

ect t

o te

chni

cal c

hang

es ·

Issu

ed 1

2/20

18

4

FAÇADE CHANNELSStainless steel or iron galvanized

DRAINAGEDrainage channels for façades,public areas and roof terraces

TTC FR 10/K TTC FR 10/U TTC FR 10/B

Material: Stainless steel or galvanized steel

Design: Slotted or closed

Drain outlet: In the closed design on the side or at the bottom, depending on the channel size

Application: Façade drainage and others

Safe to walk on

Safe to drive over: B125–D400



Drain outlet: DN 70/100, in the closed design on the side or at the bottom, depending on the channel size


Safe to walk on




Drain outlet: DN 70/100, in the closed design on the side or at the bottom, depending on the channel size

Application: Façade drainage, car park drainage and others

Safe to walk on


Widthmm

Height*mm

Standard length**mm

100/150 120 490/980/1960100/150 80–120 490/980/1960

Widthmm

Height*mm

Standard length**mm

100/150 120 490/980/1960100/150 80–120 490/980/1960

Widthmm

Height*mm

Standard length**mm

100/150 120 490/980/1960100/150 80–120 490/980/1960

Drainage channel with folded edge grating supports; configured to match the load and height requirements of the grating; riveted reinforcements, joining and end plates

**Different lengths, e.g. axial dimension of façade profiles available on request



*Heights of60–80 mmavailableon request



Drainage channel with folded edge grating supports; configured to match load and height requirements, angle bracket supported

Drainage channel for extreme loads with welded on flat bar supports

TTC FR 10/K Zinc TTC FR 10/K Stainless steel TTC FR 10/K Burnished stainless steel


5

SLOTTED CHANNELSFor almost seamless transistions between two surfaces, e.g. cobble stones or stone slabs

DRAINAGESlotted channels/stainless steel covers for public areas

TTC SR 15/1

FITTINGS

TTC SR 15/2 TTC SU/100


Design: Slotted, closed at the bottom

Drain outlet: Inspection box with drain outlet as requiredDimension 270 x 270 mm, can be customized to match the height of the slabs


Safe to walk on



Design: Slotted, closed at the bottom

Drain outlet: Inspection box with drain outlet as requiredDimension 270 x 270 mm, can be customized to match the height of the slabs

Application: Façade drainage, public areas and others

Custom design: Other heights and load classes available on request

Safe to walk on


Material: Stainless steel or K240 smooth ground surface

Design: Ushape, welded with sharp edges; sunken drill holes every 500 mm for fixing in the floor surface

Application: Public areas

Safe to walk on


Slot heightmm

Slot spacingmm

Slot posistion Channelheightmm

Lengthmm

75 10/15 Flush on both sides 200/250 980/1960/2450100 10/15 Flush on both sides 200/250 980/1960/2450

Widthmm

Heightmm

Lengthmm

70/100 30 980/1960/2450

Slotted drainage channel as an almost seamless transition between to surfaces; outstanding for draining façades and highquality outdoor surfaces

Connectors, end plates, drain outlets and feet to adjust the height are available for all channels as required.

Each channel shape can be produced in custom dimensions and in a curved design, with openings and bevel cuts.

Slotted drainage channel as an almost seamless transition between to surfaces; outstanding for draining façades and highquality outdoor surfaces

Sharpedged stainless steel Ucover as a design element for the transition between two floor surfaces


Subj

ect t

o te

chni

cal c

hang

es ·

Issu

ed 1

1/20

15

6

FAÇADE CHANNELS PLUS LED

DRAINAGEDrainlight – LEDs integratedinto drainage channels

Channels, gratings + light = DrainlightDrainlight is a combination of LED illumination, highquality stainless steel drainage channels and linear/cross grids or glass covers; to achieve the desired effect high brightness LEDLightLines with lens technology in various radiation angles are integrated into façade channels and covered with TTC gratings to illuminate façades.

Dependent on the desired effect, a variety of LED products can be used:

→ LEDWallWasher – high brightness and upward radiation up →→ to 10 m

→ LEDAround – soft light with a »floating« effect

→ LEDHayat – accent lighting and route marking

→ LEDLightLine – accent lighting and route marking

→ Light colours: warm to cool white, RGB multicolor, RGBW


7

SLOTTED CHANNELS PLUS LED

DRAINAGESlotted channelswith LED-LightLines

Accent lightingLEDLightLines can be used to emphasize interior and exterior features on façades and in entrance areas, on water basins or public squares.

Lightlines can be used to delicately edge entrance mats and dirt trapping zones and to accentuate wall and floor gratings. When recessed in the floor, route markings can be discreetly created.

The fully sealed recessed luminaire provides homogeneous illumination without visible LED points and full water integrity (IP68).

→ Straight or curved designs

→ Light colours: monochrome or RGB/multicolor


CHANNELS, GRATINGS, FLOOR MATS

A variety of optionsTTC channels can also be used for transistions between interior and exterior spaces, e.g. for dirt trapping zones and entrance areas.

→ Drain trays can be combined with LEDLightLines

→ Gratings with the same look as façade gratings

DRAINAGEEntrance areas anddirt trapping zones

8

Mat: TTC/ADODiplomat/Public

Linear gratingKSF or KSMVFlow

TTC well


9

REFERENCE PROJECTS

DRAINAGEReference projects

GAP 15, DüsseldorfArchitect: JSK, Düsseldorf

→ Type FR 10/K, SU/100, SR/15 channels with type KSF comb →→ grating for high load resistance, made from 6 mm steel plate →→ braced with round cross connections and metal strips

→ Folded base construction for anchoring in the concrete bed

→ Safe to drive over for cars and fire engines

Museum Folkwang, EssenArchitect: David Chipperfield, London/Berlin

→ Type FR 10/K channels, slotted on on side with KSF comb grating

→ Grating support on folded channel


REFERENCE PROJECTS


Kö-Bogen, DüsseldorfClient: die developer, Düsseldorf; Architect: Daniel Libeskind, New York/Zurich; Light planner: Lichtvision, Berlin/Munich

→ Slotted drainage channels, straight and curved designs, in part →→ with LEDLightLines

→ Stainless steel façade channels with aluminium linear gratings →→ with uniform spacing from the channel for a clean joint

→ Stainless steel entrance gratings in the same look as the façade →→ gratings

10


REFERENCE PROJECTS


Mitsubishi Electric, RatingenLandscape architects: RMP Stephan Lenzen, Bonn

→ Type FR/10U façade channels, slotted on one side with type KSMV →→ linear grating, 7 mm bar spacing, and galvanized finish

→ Filigree grating design with uniform bar spacing to each other →→ and to the channel edge

→ Grating length aligned to axial dimension, grating joints always →→ mid axis

→ Channels and gratings in front of revolving door radially en →→ gineered

Kopenhagen Concert HallArchitect: Jean Nouvel; Client: Danish Radio

→ Linear gratings made from brushed stainless steel with a support →→ structure, in the interior and exterior areas

→ Partially curved, partially straight linear gratings made from →→ brushed stainless steel with 5 mm bar spacing and a load →→ carrying capacity of 4 KN per 100 x 100 mm, for the interior/ →→ exterior transitions on revolving, wing, and twowing sliding →→ doors

11


Designing innovative solutionsfor new buildings and redevelopmenttogether with architects and plannersDeveloping object specific solutions together with architects and specialist planners already during the planning phase is the strength of TTC Timmler Technology.TTC provides smart building technology for contemporary living and working environments: LED light design, innovative airconditioning systems, designoriented façade elements and grating systems for interior and exterior areas.With our extensive knowhow we can balance modern design, energy efficiency, and economic efficiency. We design customized complete solutions in accordance with technical specifications, either made from standard components or made to your individual requirements.

Green and economicalPeople and environment are at the heart of all our endeavours. We develop natural airconditioning systems to go easy on resources and to save costs.

Multi-functionalityOur know-how for your planningMultifunctionality is a special strength of TTC building technology. Below a few examples:

• LED Light Design – TTC lighting elements can be combined with channels and gratings as well as maintenance platforms, using striking illuminations to show your architecture in the best light. TTC light design offers a variety of options: From façade illumination with SpaceLights, high brightness LEDs, LED light lines and light tiles to wall washers – with our large choice of materials and individual design we can provide a customized solution for your project.

• TTC GraviVent® can be used to provide a consistent climate within a building. Energyefficient, making use of natural gravity.

• TTC Chilled Beams ensure comfortable, silent ventilation in a wide variety of working environments. In consultation with architects and planners they can be individually fitted into the ceiling design.

• TTC Floorunits with a variety of functions such as heating, cooling, ventilation combine design with functionality and energy efficiency without disturbing the look of, for example, room height glass façades.

• Homogeneous grating systems create seamless transitions from the interior to the exterior on glass façades. TTC Floorunits provide heating, cooling and ventilation for interior areas and complement the TTC façade draining systems for exterior areas.

TTC Timmler Technology GmbH

ChristianSchäferStr. 8 | D53881 FlamersheimTel +49 2255 9210 | Fax +49 2255 921500info@ttctechnology.eu | www.ttctechnology.eu


Documents

TTC Timmler Technology DRAINAGE · Linear gratings as covers | Detailed information in the »Homogeneous Gratings Design« brochure TTC KST TTC KSM-V Material: Aluminium Bar layout: