Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
TTHHÖÖ VVIIEEÄÄNN ÑÑAAÏÏII HHOOÏÏCC CCOOÂÂNNGG NNGGHHIIEEÄÄPP TTPP.. HHCCMM
--------------------
TTRRÍÍCCHH BBAAÙÙOO TTAAÏÏPP CCHHÍÍ
KKHHOOAA HHOOÏÏCC && CCOOÂÂNNGG NNGGHHEEÄÄ
TTIIEEÂÂUU CCHHUUAAÅÅNN
VVIIEEÄÄTT NNAAMM && TTHHEEÁÁ GGIIÔÔÙÙII
TTHHAAÙÙNNGG 0022//22001100
hhttttpp::////lliibb..hhuuii..eedduu..vvnn
2
Tiêu chuẩn Việt Nam- TCVN
TT Số hiệu
Tiêu chuẩn Tên tiêu chuẩn A4
1
TCVN 3890:2009
Thay thế: TCVN
3890:1984
Phương tiện phòng cháy và chữa cháy cho nhà và
công trình. Trang bị, bố trí, kiểm tra, bảo dưỡng.
35
2 TCVN 192:2009
Năng lượng hạt nhân. Vật liệu phân hạch. Nguyên
lý an toàn tới hạn trong lưu giữ, xử lý và chế biến.
10
3 TCVN 8021-3:2009
Công nghệ thông tin. Mã phân định đơn nhất. Phần
3: Quy tắc chung đối với các mã phân định đơn
nhất.
10
4 TCVN 8191:2009
Công nghệ nhiên liệu hạt nhân. Tiêu chí quản lý
liên quan tới an toàn tới hạn hạt nhân.
11
5 TCVN 8156:2009
Bơ. Xác định hàm lượng muối. Phương pháp đo
điện thế.
12
6 TCVN 8021-4:2009
Công nghệ thông tin. Mã phân định đơn nhất. Phần
4: Vật phẩm riêng.
12
7
TCVN 8155:2009
Bơ, sữa lên men và phomat tươi. Định lượng các vi
sinh vật nhiễm bẩn. Kỹ thuật đếm khuẩn lạc ở 30
độ C.
13
8
TCVN 8021-5:2009
Công nghệ thông tin. Mã phân định đơn nhất. Phần
3: Mã phân định đơn nhất đối với vật phẩm là đơn
vị vận tải có thể quay vòng.
13
9
TCVN 8021-6:2009
Công nghệ thông tin. Mã phân định đơn nhất. Phần
6: Mã phân định đơn nhất đối với đơn vị nhóm sản
phẩm.
14
3
10
TCVN 8154:2009
Bơ, nhũ tương dầu thực phẩm và chất béo dạng
phết. Xác định hàm lượng chất béo (Phương pháp
chuẩn).
16
11 TCVN 8154:2009
An toàn bức xạ. Thiết bị chiếu xạ công nghiệp sử
dụng nguồn đồng vị gamma. Yêu cầu chung.
20
12
TCVN 4069:2009
Thay thế: TCVN
4069:1985
Kẹo. Xác định độ ẩm Candy. 11
13
TCVN 4070:2009
Thay thế: TCVN
4070:1985
Kẹo. Xác định hàm lượng tro tổng số Candy. 5
14
TCVN 4071:2009
Thay thế: TCVN
4071:1985
Kẹo. Xác định tro không tan trong axit clohydric
Candy.
8
15 TCVN 4072:2009
TCVN 4072:1985
Kẹo. Xác định hàm lượng chất béo Candy. 8
16
TCVN 4073:2009
Thay thế: TCVN
4073:1985
Kẹo. Xác định hàm lượng axit Candy. 10
17
TCVN 4074:2009
Thay thế: TCVN
4074:1985
Kẹo. Xác định hàm lượng đường tổng số Candy. 11
18 TCVN 4075:2009
TCVN 4075:1985
Kẹo. Xác định hàm lượng đường khử Candy. 10
19 TCVN 4837:2009
TCVN 4837:1989
Đường. Lấy mẫu Sugar. 8
4
20
TCVN 8209:2009
Thay thế: TCVN
5168:1990, TCVN
5110:1990, TCVN
6162:1996
Quy phạm thực hành vệ sinh đối với thịt. 76
21
TCVN 5908:2009
Thay thế: TCVN
5908:1995
Kẹo Candy. 7
22
TCVN 7322:2009
Thay thế: TCVN
7322:2003
Công nghệ thông tin. Kỹ thuật phân định và thu
nhận dữ liệu tự động. Yêu cầu kỹ thuật đối với mã
hình QR code 2005 Information technology.
138
Tiêu chuẩn ISO
TT Số hiệu
Tiêu chuẩn Tên tiêu chuẩn A4
1 ISO 13739:2010 Petroleum products - Procedures for transfer of
bunkers to vessels.
42
2
ISO 6182-12:2010 Fire protection - Automatic sprinkler systems - Part
12: Requirements and test methods for grooved-
end components for steel pipe systems.
15
3
ISO 10936-2:2010 Optics and photonics - Operation microscopes -
Part 2: Light hazard from operation microscopes
used in ocular surgery.
4
4 ISO 16853:2010 Textile machinery - Sliver cans, rectangular - Main
dimensions and tolerances.
3
5
ISO 22369-2:2010 Crop protection equipment - Drift classification of
spraying equipment - Part 2: Classification of field
crop sprayers by field measurements.
5
6 ISO 105-A01:2010 Textiles - Tests for colour fastness - Part A01:
General principles of testing.
10
5
7
ISO 12625-12:2010 Tissue paper and tissue products - Part 12:
Determination of tensile strength of perforated
lines - Calculation of perforation efficiency.
14
8
ISO 7396-
1:2007/Amd 1:2010
Requirements for terminal units for vacuum fitted
on medical supply units with operator-adjustable
portions and connected to the pipeline through
flexible hoses.
1
9 ISO 17874-1:2010 Remote handling devices for radioactive materials -
Part 1: General requirements.
27
10
ISO 15752:2010 Ophthalmic instruments - Endoilluminators -
Fundamental requirements and test methods for
optical radiation safety.
7
11 ISO 19719:2010 Machine tools - Work holding chucks -
Vocabulary.
70
12 ISO 9539:2010 Gas welding equipment - Materials for equipment
used in gas welding, cutting and allied processes.
4
13
ISO 29803:2010 Thermal insulation products for building
applications - Determination of the resistance to
impact of external thermal insulation composite
systems (ETICS).
7
14 ISO/IEC 23002-
4:2010
Information technology - MPEG video
technologies - Part 4: Video tool library.
57
15 ISO 10961:2010 Gas cylinders - Cylinder bundles - Design,
manufacture, testing and inspection.
20
16
ISO 12968:2010 Thermal insulation products for building
applications - Determination of the pull-off
resistance of external thermal insulation composite
systems (ETICS) (foam block test).
6
6
17
ISO 25178-6:2010 Geometrical product specifications (GPS) - Surface
texture: Areal - Part 6: Classification of methods
for measuring surface texture.
11
18
ISO/TR 9241-
100:2010
Ergonomics of human-system interaction - Part
100: Introduction to standards related to software
ergonomics.
19
19
ISO 7507-4:2010 Petroleum and liquid petroleum products --
Calibration of vertical cylindrical tanks - Part 4:
Internal electro-optical distance-ranging method.
20
20 ISO 10679:2010 Steel - Cast tool steel. 4
21 ISO 15242-
2:2004/Cor 1:2010
Media and price. 2
22 ISO 8729-1:2010 Ships and marine technology - Marine radar
reflectors - Part 1: Passive type.
13
23 ISO 17201-5:2010 Acoustics - Noise from shooting ranges -- Part 5:
Noise management.
25
24 ISO 17201-3:2010 Acoustics - Noise from shooting ranges - Part 3:
Guidelines for sound propagation calculations.
55
25 ISO 8566-3:2010 Cranes - Cabins and control stations - Part 3:
Tower cranes
4
26
ISO 29981:2010 Milk products - Enumeration of presumptive
bifidobacteria - Colony count technique at 37
degrees C.
17
27 ISO 8566-1:2010 Cranes - Cabins and control stations - Part 1:
General.
6
28 ISO 12439:2010 Mixing water for concrete. 14
29
ISO
16409:2006/Amd
1:2010
Media and price. 1
7
30 ISO 22394:2010 Hardmetals - Knoop hardness test. 16
31
ISO 15223-2:2010 Medical devices - Symbols to be used with medical
device labels, labelling, and information to be
supplied - Part 2: Symbol development, selection
and validation.
16
32 ISO/TS 27469:2010 Petroleum, petrochemical and natural gas industries
- Method of test for fire dampers.
17
33 ISO 27892:2010 Vacuum technology - Turbomolecular pumps -
Measurement of rapid shutdown torque.
16
34 ISO 15798:2010 Ophthalmic implants - Ophthalmic viscosurgical
devices.
16
35
ISO 10243:2010 Tools for pressing - Compression springs with
rectangular section - Housing dimensions and
colour coding.
18
36 ISO 7396-
1:2007/Amd 2:2010
Media and price. 1
Tiêu chuẩn Mỹ - ASTM
TT Số hiệu
Tiêu chuẩn Tên tiêu chuẩn A4
1 ASTM A101 -
04(2009)
Standard Specification for Ferrochromium. 3
2 ASTM A102 -
04(2009)
Standard Specification for Ferrovanadium. 2
3 ASTM A132 -
04(2009)
Standard Specification for Ferromolybdenum. 3
4 ASTM A144 -
04(2009)
Specification for Ferrotungsten. 2
5 ASTM A146 -
04(2009)
Standard Specification for Molybdenum Oxide
Products.
2
8
6 ASTM A483 -
04(2009)
Standard Specification for Silicomanganese. 2
7 ASTM A610 -
79(2009)
Standard Test Methods for Sampling and Testing
Ferroalloys for Determination of Size.
2
8
ASTM A799 /
A799M - 04(2009)
Standard Practice for Steel Castings, Stainless,
Instrument Calibration, for Estimating Ferrite
Content.
4
9 ASTM A941 - 09a Terminology Relating to Steel, Stainless Steel,
Related Alloys, and Ferroalloys.
7
10
ASTM A1065 /
A1065M – 09
Standard Specification for Cold-Formed Electric-
Fusion (Arc) Welded High-Strength Low–Alloy
Structural Tubing in Shapes, with 50 ksi [345 MPa]
Minimum Yield Point.
6
11 ASTM B22 - 09e1 Standard Specification for Bronze Castings for
Bridges and Turntables.
4
12 ASTM B201 -
80(2009)e1
Standard Practice for Testing Chromate Coatings
on Zinc and Cadmium Surfaces.
3
13
ASTM B904 -
00(2009)
Standard Specification for Autocatalytic Nickel
over Autocatalytic Copper for Electromagnetic
Interference Shielding.
4
14 ASTM B940 -
05(2009)e1
Standard Practice for Testing Non-Chromate
Coatings on Zinc and Cadmium Surfaces.
3
15 ASTM C114 - 09a Standard Test Methods for Chemical Analysis of
Hydraulic Cement.
31
16 ASTM C125 – 09 Standard Terminology Relating to Concrete and
Concrete Aggregates.
5
17 ASTM C286 -
99(2009)
Standard Terminology Relating to Porcelain
Enamel and Ceramic-Metal Systems.
8
9
18
ASTM C490 /
C490M – 09
Standard Practice for Use of Apparatus for the
Determination of Length Change of Hardened
Cement Paste, Mortar, and Concrete.
5
19
ASTM C928 /
C928M – 09
Standard Specification for Packaged, Dry, Rapid-
Hardening Cementitious Materials for Concrete
Repairs.
5
20
ASTM C1702 - 09a Standard Test Method for Measurementof Heat of
Hydration of Hydraulic Cementitious Materials
Using Isothermal Conduction Calorimetry.
7
21 ASTM D1139 /
D1139M – 09
Standard Specification for Aggregate for Single or
Multiple Bituminous Surface Treatments.
3
22 ASTM D1334 -
05(2009)
Standard Test Method for Wool Content of Raw
Wool-Commercial Scale.
3
23 ASTM D2013 /
D2013M – 09
Standard Practice for Preparing Coal Samples for
Analysis
11
24 ASTM D2493 /
D2493M – 09
Standard Viscosity-Temperature Chart for
Asphalts.
5
25 ASTM D2513 - 09a Standard Specification for Thermoplastic Gas
Pressure Pipe, Tubing, and Fittings.
16
26 ASTM D2728 -
98(2009)
Standard Practice for Paving Uses and Application
Temperatures for Road Tars.
2
27 ASTM D3332 -
99(2010)
Standard Test Methods for Mechanical-Shock
Fragility of Products, Using Shock Machines.
8
28 ASTM D3580 -
95(2010)
Standard Test Methods for Vibration (Vertical
Linear Motion) Test of Products.
4
29
ASTM D4460 -
97(2009)
Standard Practice for Calculating Precision Limits
Where Values are Calculated from Other Test
Methods.
3
10
30 ASTM D4510 -
05(2009)
Standard Test Method for Counting Partial
Cleavages in Wool and Other Animal Fibers.
7
31 ASTM D5340 - 09a Test Method for Airport Pavement Condition Index
Surveys
53
32
ASTM D5713 – 09 Standard Test Method for Analysis of High Purity
Benzene for Cyclohexane Feedstock by Capillary
Gas Chromatography.
4
33 ASTM D5891 -
02(2009)
Standard Test Method for Fluid Loss of Clay
Component of Geosynthetic Clay Liners.
3
34 ASTM D5993 -
99(2009)
Standard Test Method for Measuring Mass Per
Unit of Geosynthetic Clay Liners.
4
35
ASTM D6140 -
00(2009)
Standard Test Method to Determine Asphalt
Retention of Paving Fabrics Used in Asphalt
Paving for Full-Width Applications.
3
36
ASTM D6496 -
04a(2009)
Standard Test Method for Determining Average
Bonding Peel Strength Between the Top and
Bottom Layers of Needle-Punched Geosynthetic
Clay Liners.
4
37 ASTM D6607 -
00(2009)
Standard Practice for Inclusion of Precision
Statement Variation in Specification Limits.
3
38 ASTM D6768 -
04(2009)
Standard Test Method for Tensile Strength of
Geosynthetic Clay Liners.
3
39
ASTM D6826 -
05(2009)
Standard Specification for Sprayed Slurries, Foams
and Indigenous Materials Used As Alternative
Daily Cover for Municipal Solid Waste Landfills.
3
40 ASTM D7180 -
05(2009)
Standard Guide for Use of Expanded Polystyrene
(EPS) Geofoam in Geotechnical Projects.
3
11
41
ASTM D7427 - 08e1 Standard Test Method for Immunological
Measurement of Four Principal Allergenic Proteins
(Hev b 1, 3, 5 and 6.02) in Natural Rubber and Its
Products Derived from Latex.
16
42
ASTM D7565 /
D7565M – 09
Standard Test Method for Determining Tensile
Properties of Fiber Reinforced Polymer Matrix
Composites Used for Strengthening of Civil
Structures.
5
43 ASTM E681 – 09 Standard Test Method for Concentration Limits of
Flammability of Chemicals (Vapors and Gases).
12
44 ASTM E1338 – 09 Guide for Identification of Metals and Alloys in
Computerized Material Property Databases.
9
45
ASTM E1748 -
95(2009)
Standard Test Method for Evaluating the
Engagement Between Windows and Insect Screens
as an Integral System.
3
46 2010 ASTM E1986 –
09
Standard Guide for Information Access Privileges
to Health Information
13
47 ASTM E2128 -
01a(2009)
Standard Guide for Evaluating Water Leakage of
Building Walls.
35
48
ASTM E2140 -
01(2009)
Standard Test Method for Water Penetration of
Metal Roof Panel Systems by Static Water Pressure
Head.
4
49 ASTM E2254 – 09 Standard Test Method for Storage Modulus
Calibration of Dynamic Mechanical Analyzers.
3
50
ASTM E2652 - 09a Standard Test Method for Behavior of Materials in
a Tube Furnace with a Cone-shaped Airflow
Stabilizer, at 750°C.
12
51 ASTM E2691 – 09 Standard Practice for Job Productivity
Measurement.
14
12
52 ASTM E2729 – 09 Standard Practice for Rectification of
Spectrophotometric Bandpass Differences.
3
53 ASTM F746 -
04(2009)e1
Standard Test Method for Pitting or Crevice
Corrosion of Metallic Surgical Implant Materials.
6
54 ASTM F1801 -
97(2009)e1
Standard Practice for Corrosion Fatigue Testing of
Metallic Implant Materials.
6
55
ASTM F1869 – 09 Standard Test Method for Measuring Moisture
Vapor Emission Rate of Concrete Subfloor Using
Anhydrous Calcium Chloride.
3
56
ASTM F1942 -
98(2010)
Standard Practice for Creating Test Targets for
Determining the Ink Yield of the Imaging Supplies
Used in Ink Jet Printers.
3
Tiêu chuẩn Nhật- JIS
TT Số hiệu
Tiêu chuẩn Tên tiêu chuẩn A4
1 JIS B 1018:2009 Fasteners. Thread undercuts for external metric ISO
threads.
2
2 JIS B 1562:2009 Rolling bearings. Damage and failures. Terms,
characteristics and causes.
42
3 JIS C 5064:2009 Fixed inductors for use in electronic and
telecommunication equipment. Marking codes.
6
4 JIS C
5901:2009/AMD 1
Test methods of passive devices for fibre optic
transmission (Amendment 1).
6
5
JIS C 8121-2-2:2009 Miscellaneous lampholders. Part 2-2: Particular
requirements. Connectors for printed circuit board
based LED-modules.
6
6
JIS T 8024:2009 Clothing for protection against heat and flame.
Determination of heat transmission on exposure to
both flame and radiant heat.
24
13
7
JIS A 5525:2009
Thay thế: JIS A
5525:2004
Steel pipe piles. 25
8
JIS B 1551:2009
Thay thế: JIS B
1551:1995
Rolling bearings. Plummer block housings. 29
9
JIS B 9706-1:2009
Thay thế: JIS B
9706-1:2001
Safety of machinery. Indication, marking and
actuation. Part 1: Requirements for visual, acoustic
and tactile signals
17
10
JIS B 9706-2:2009
Thay thế: JIS B
9706-2:2001
Safety of machinery. Indication, marking and
actuation. Part 2: Requirements for marking.
10
11
JIS B 9706-3:2009
Thay thế: JIS B
9706-3:2001
Safety of machinery. Indication, marking and
actuation. Part 3: Requirements for the location and
operation of actuators.
10
12
JIS G 2402:2009
Thay thế: JIS G
2402:2005
Aluminium dross for iron and steel making. 29
13
JIS S 3024:2009
Thay thế: JIS S
3024:2007
Oil burning water heaters for domestic use. 26
14
JIS Z 8722:2009
Thay thế: JIS Z
8722:2000
Methods of colour measurement. Reflecting and
transmitting objects.
65
Tiêu chuẩn IEC
TT Số hiệu
Tiêu chuẩn Tên tiêu chuẩn A4
1 IEC 60071-1-am1
ed8.0
Amendment 1 - Insulation co-ordination - Part 1:
Definitions, principles and rules.
13
14
2
IEC 60079-20-1
ed1.0
Explosive atmospheres - Part 20-1: Material
characteristics for gas and vapour classification -
Test methods and data
152
3
IEC 60191-6-18
ed1.0
Mechanical standardization of semiconductor
devices - Part 6-18: General rules for the
preparation of outline drawings of surface mounted
semiconductor device packages - Design guide for
ball grid array (BGA).
40
4 IEC 60268-7 ed3.0 Sound system equipment - Part 7: Headphones and
earphones.
46
5
IEC 60728-1-1 ed1.0 Cable networks for television signals, sound signals
and interactive services - Part 1-1: RF cabling for
two way home networks.
57
6
IEC 60728-2 ed2.0 Cable networks for television signals, sound signals
and interactive services - Part 2: Electromagnetic
compatibility for equipment.
53
7
IEC 60728-13 ed1.0 Cable networks for television signals, sound signals
and interactive services - Part 13: Optical systems
for broadcast signal transmissions.
69
8 IEC 60747-14-1
ed2.0
Semiconductor devices - Part 14-1: Semiconductor
sensors - Generic specification for sensors.
42
9 IEC 60974-9 ed1.0 Arc welding equipment - Part 9: Installation and
use.
27
10
IEC 61156-6 ed3.0 Multicore and symmetrical pair/quad cables for
digital communications - Part 6: Symmetrical
pair/quad cables with transmission characteristics
up to 1 000 MHz - Work area wiring - Sectional
specification.
20
15
11
IEC 61191-6 ed1.0 Printed board assemblies - Part 6: Evaluation
criteria for voids in soldered joints of BGA and
LGA and measurement method.
76
12 IEC 61231 ed1.0 International lamp coding system (ILCOS). 48
13 IEC 61340-4-6 ed1.0 Electrostatics - Part 4-6: Standard test methods for
specific applications - Wrist straps.
19
14 IEC 61340-4-7 ed1.0 Electrostatics - Part 4-7: Standard test methods for
specific applications – Ionization.
30
15 IEC 61340-4-8 ed1.0 Electrostatics - Part 4-8: Standard test methods for
specific applications - Discharge shielding – Bags.
13
16 IEC 61340-4-9 ed1.0 Electrostatics - Part 4-9: Standard test methods for
specific applications – Garments.
11
17
IEC 61391-2 ed1.0 Ultrasonics - Pulse-echo scanners - Part 2:
Measurement of maximum depth of penetration
and local dynamic range.
37
18
IEC/TR 61491 ed1.0 Electrical equipment of industrial machines - Serial
data link for real-time communication between
controls and drives.
17
19
IEC 62333-3 ed1.0 Noise suppression sheet for digital devices and
equipment - Part 3: Characterization of parameters
of noise suppression sheet.
22
20
IEC 62368-1 ed1.0 Audio/video, information and communication
technology equipment - Part 1: Safety
requirements.
313
21 ISO/IEC 23002-4
ed1.0
Information technology - MPEG video
technologies - Part 4: Video tool library.
57
Thư viện Đại học Công Nghiệp TP.HCM đã ký hợp đồng cung cấp thông tin trọn gói với Trung tâm thông tin khoa học và công nghệ TP.HCM, toàn thể sinh viên, giảng viên và cán bộ nhân viên trong trường có nhu cầu tra cứu thông tin xin liên hệ trực tiếp: Phòng đảm bảo thông tin của trung tâm thông tin khoa học và công nghệ TP.HCM
16
Địa chỉ: 79 Trương Định - Q1 - TP.HCM ĐT: (08)38243826: (08)38297040 Ext: 202-203-216) Fax: 38291957 Website: www.sesti.gov.vn Email: [email protected] Lưu ý 1/: Cung cấp thông tin miễn phí (chỉ thanh toán tiền photocopy và giấy in) khi đến gửi yêu cầu thông tin, nhớ mang theo thẻ sinh viên và thẻ giảng viên. 2/ Nếu bạn đọc không thể đến Trung tâm thông tin khoa học và công nghệ TP.HCM - hãy gửi yêu cầu thông tin cho Thư viện Đại học Công Nghiệp TP.HCM. Liên hệ: Thủ thư Phòng Đa phương tiện. Mọi chi tiết xin liên hê Thư viện ĐHCN TP.HCM. ĐT: (08)38940390 (130 - 131 -132) Email: [email protected] - [email protected]
.