MORPHOACCESS™ J SERIES TWICSLEEK FINGERPRINT IDENTIFICATION

FOR TWIC IMPLEMENTATIONS

TWIC BIOMETRIC READER

Supports TWIC Operating Modes for all MARSEC Levels by using TWIC Privacy Keys to securely

decrypt the encrypted biometric across the contactless interface

1.5 seconds to complete full operation:

– 1/ TWIC card presentation, 2/ Biometric Authentication, 3/ Access granted

IP65 rating yet compact aesthetic design

Comms. options: Ethernet, POE, WIFI, RS-485, RS-422, & Wiegand-out

FIPS 201 approved template generator & matcher

Morpho fingerprint image enhancement

– Filters, corrects for dirt, grease, scars

MORPHOACCESS™ J SERIES TWICSLEEK FINGERPRINT IDENTIFICATION

FOR TWIC IMPLEMENTATIONS

TWIC BIOMETRIC READER

MorphoAccess J-Series TWIC is a sleek low-cost biometric

access control reader for TWIC implementations. This elegant

reader is equally well-suited for use in business offices or

outdoors (IP65-rated). Supporting TWIC Operating Modes

for all MARSEC Levels, the reader uses TWIC Privacy Keys

to decrypt the encrypted biometric across the contactless

interface. Excellent performance comes from the dual-core

ARM9 microprocessor and MorphoTrak’s trusted FIPS201

template generator and matcher. Versatile communication

options include Ethernet, POE, WIFI, RS-485, RS-422, and

Wiegand-out.

Processor: 2 ARM9

Physical Characteristics

- Dimensions: 3.15” x 5.0” x 2.42” (80x127x61.5mm)

- Weight: 6.8oz

Software Development Kit (SDK)

- TWIC card registration to PAC enrollment database

Environment

- Standard operating temperature: 14 F to 122 F (-10 C to +50 C)

- Electrical Supply Voltage: 9V, 16V (250mA typical @ 12 V)

- IP65 (once wall-mounted)

Power Supply

- Power-Over-Ethernet (POE) or External 9V-16V (250mA typical @12V)

Communication Interface Capabilities

- Port for ID card management

- Customizable Wiegand IN & OUT, RS-485, RS-422, Data & Clock IN & OUT

- Ports for terminal communications

- Ethernet 10/100 BaseT with DHCP via RJ45 connector or interface board

- Wireless LAN (WIFI)

- USB Host connector on motherboard

- Relay: Low voltage N.O. or N.C. configurable Regulatory Approvals

- Complies with EN60950, EN55022, FCC part 15 and EN55024, EN300330-1 and 2, CE, UL 60950

- Able to interface with any Wiegand format PACS system

Technical Characteristics

Fingerprint Sensor

- 500 dpi CBM Optical sensor 0.55 in. x 0.87 in. (14 x 22 mm)

- FIPS 201 approved biometric algorithms

- Template extractor and template matcher MINEX certified

- 1:1 verification time < 1sec

- Identification time (1,000 records) < 1sec

- Morpho fingerprint image enhancement – Filters, corrects for dirt, grease, scars

- Handles 180 degree fingerprint rotation

- Most accurate and interoperable fingerprint technology on GSA FIPS 201 APL

Security

- SSL on TCP/IP network, Wireless Protected Access (WPA)

- Secure screws, anti-tamper & anti- pulling switches

MorphoTrakContact us: (800) 601-6790 - www.morphotrak.com113 South Columbus Street 4th FloorAlexandria, Virginia U.S.A. 22314 © 2011 MorphoTrak - REV.081111