3. Place the faucet on the countertop. 4. If the countertop is thin or the faucet is being mounted on the sink itself, place the countertop extender (#12) from underneath the countertop and tighten it onto the tailpiece (#4). **OPTIONAL** 5. Place the rubber washer (#6) and then the metal washer (#7) onto the tailpiece (#4) from underneath the countertop. 6. Place the fixing set (#8) onto tailpiece (#4) underneath the countertop and tighten it. 7. Connect pullout hose (#11) to copper tube. see details on page 2 8. Place the weight (#9) onto pullout hose (#11). 9. Screw in the hot and cold waterlines (#10) and attach them to the water supply.

Untitled-2 [content.haycdn.com] · 2014-02-18 · Connect pullout hose (#11) to copper tube. see details on page 2 8. Place the weight (#9) onto pullout hose (#11). 9. Screw in the

Download PDF Report

Upload
others
View
0
Download
0

Embed Size (px)

Citation preview

Page 1: Untitled-2 [content.haycdn.com] · 2014-02-18 · Connect pullout hose (#11) to copper tube. see details on page 2 8. Place the weight (#9) onto pullout hose (#11). 9. Screw in the

3. Place the faucet on the countertop.4. If the countertop is thin or the faucet is being mounted on the sink itself, place the countertop extender (#12) from underneath the countertop and tighten it onto the tailpiece (#4). **OPTIONAL**5. Place the rubber washer (#6) and then the metal washer (#7) onto the tailpiece (#4) from underneath the countertop.6. Place the fixing set (#8) onto tailpiece (#4) underneath the countertop and tighten it. 7. Connect pullout hose (#11) to copper tube. see details on page 28. Place the weight (#9) onto pullout hose (#11).9. Screw in the hot and cold waterlines (#10) and attach them to the water supply.