User guide - dl.owneriq.netdl.owneriq.net/3/36cb5eff-695e-46e0-be51-0762044e07b0.pdf · LEA CUIDADOSAMENTE ESTE INSTRUCTIVO ANTES DE USAR SU APARATO. AVISO IMPORTANTE Philips Mexicana,S.A.de

1

S M A R T . V E R Y S M A R T .

User guide

DVD VIDEO DIGITAL SUROUND SYSTEMMRD120

2

MéxicoEs necesario que lea cuidadosamente su instructivo demanejo.

No abrir, riesgo de choque eléctrico

Verifique que el voltaje de alimentaciónsea el requerido para su aparato

ATENCIÓN

Para evitar el riesgo de choque eléctrico, no quite la tapa.En caso de requerir servicio, dirijase al personal calificado.

PRECAUCIÓN - ADVERTENCIA

Descripción: Reproductor de Disco de Video DigitalModelo : MRD120/78Alimentación: 110–127 / 220–240V~; 50–60 HzConsumo: 120 WImportador : Philips Mexicana, S.A. de C.V.Domicilio: Av. La Palma No. 6

Col. San Fernando La HerraduraHuixquilucan

Localidad y Tel: Edo. de México C.P. 52784Tel. 52 69 90 00

Exportador : Philips Electronics HK, Ltd.País de Origen: ChinaNº de Serie: ______________________________

LEA CUIDADOSAMENTE ESTE INSTRUCTIVOANTES DE USAR SU APARATO.

AVISO IMPORTANTEPhilips Mexicana, S.A. de C.V. no se hace

responsable por daños o desperfectos causados por:– Maltrato, descuido o mal uso, presencia de

insectos o roedores (cucarachas, ratones etc.).– Cuando el aparato no haya sido operarado

de acuerdo con el instructivo del uso, fuera de los valores nominales y tolerancias de lastensiones (voltaje), frecuencia (ciclaje) dealimentación eléctrica y las características que deben reunir las instalaciones auxiliares.

– Por fenómenos naturales tales como:temblores, inundaciones, incendios, descargaseléctricas, rayos etc. o delitos causados porterceros (choques asaltos, riñas, etc.).

CAUTIONUse of controls or adjustmentsor performance of proceduresother than herein may result inhazardous radiation exposure orother unsafe operation.

ATENCIÓNEl uso de mando o ajustes o laejecucción de métodos que nosean los aquí descritos puedeocasionar peligro de exposicióna radiación.

En

gli

s hE

spa

ño

lPo

rtu

guês

3

Index

English ------------------------------------------------ 8

Español --------------------------------------------- 36

Português ------------------------------------------ 68

Environmental informationAll unnecessary packaging has been omitted.We have tried to make the packaging easyto separate into three materials: cardboard(box), polystyrene foam (buffer) andpolyethylene (bags, protective foam sheet).

Your system consists of materials which canbe recycled and reused if disassembled by aspecialised company. Please observe the localregulations regarding the disposal of packagingmaterials, exhausted batteries and oldequipment.

Manufactured under license from DolbyLaboratories. “Dolby”, “Pro-Logic” and thedouble-D symbol are trademarks ofDolby Laboratories. Confidential

This product incorporates copyrightprotection technology that is protected bymethod claims of certain U.S. patents andother intellectual property rights owned byMacrovision Corporation and other rightsowners. Use of this copyright protectiontechnology must be authorized byMacrovision Corporation, and is intendedfor home and other limited viewing usesonly unless otherwise authorized byMacrovision Corporation. Reverseengineering or disassembly is prohibited.

‘CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 525p AND 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTRE’.

IMPORTANT NOTEDue to the numerous versions of newCD-Audio copy protection orenhanced CD-Audio protectionrecently available on certain discs,Magnavox is unable to guaranteethat this DVD system is fullycompatible with such new discs.Should you have difficulty playingsuch CD-Audio discs, kindly referthem to yourCD-Audio disc retailer.

En

glish

4

General InformationSupplied accessories ............................................ 5Care and safety information .............................. 5

ConnectionsStep 1: Placing the speakers and subwoofer . 6Step 2: Connecting speakers and subwoofer 7Step 3: Connecting TV ....................................... 8

Using Composite Video jack ........................ 8Using Component Video jack(Pr/Cr Pb/Cb Y) ............................................. 8Using S-Video jack .......................................... 9Using an accessory RF modulator .............. 9

Step 4: Connecting FM/MW antennas .......... 10Step 5: Connecting the power cord ............... 10

Connections (optional)Connecting a VCR or Cable/Satellite Box ... 11

Viewing and listening to the playback ...... 11Using the VCR for recording DVDplayback ........................................................... 11

Connecting digital audio equipment .............. 11Digital Recording .......................................... 11

Functional OverviewMain unit and remote control ......................... 12

Control buttons available on theremote only ................................................... 13

Getting StartedStep 1: Inserting batteries into theremote control ................................................... 14

Using the remote control to operatethe system ...................................................... 14

Step 2: Setting the TV ........................................ 14Selecting the colour system thatcorresponds to your TV .............................. 15Setting the TV shape .................................... 15

Step 3: Setting the speakers ............................. 16Test Tone – turning on/off.......................................................................... 16Adjusting the delay time .............................. 16Adjusting the speaker output levels ......... 16

Step 4: Setting language preferences .............. 17On-screen display (OSD) language ........... 17Audio, Subtitle and Disc Menu language .. 17

Disc OperationsPlayable discs ....................................................... 18Playing discs ......................................................... 18Using the Disc Menu ......................................... 19Basic playback controls ..................................... 19

Resuming playback from the laststopped point (DVD/VCD/CD) .............. 19

Selecting various repeat functions .................. 20Repeat play mode ......................................... 20Repeating a section within achapter/track ................................................ 20

Programme favourite tracks(audio CDs and VCDs) ..................................... 20

Clearing the programme ............................. 20Using the menu bar to programme ............... 21Playing MP3/Picture disc (Kodak, JPEG) ....... 21

DVD Setup Menu OptionsUsing the menu bar ........................................... 22Using the Setup Menu ....................................... 23

Setting the video output ............................. 23Screen saver – turning on/off .................... 24Setting the digital output ............................ 24Night mode – turning on/off ..................... 25Restoring the original settings ................... 25Restricting playback by parental control . 26Changing the password ............................... 27

Tuner OperationsTuning to radio stations .................................... 28Presetting radio stations ................................... 28

Automatic presetting ................................... 28Manual presetting ......................................... 28

Selecting a preset radio station ....................... 28Deleting a preset radio station .................. 28

Changing tuning grid .......................................... 29

Other FunctionsSetting the Sleep timer ..................................... 29Sound Control .................................................... 30

Selecting surround sound ........................... 30Selecting digital sound effects .................... 30

Volume Control .................................................. 30Dimming system’s display screen .................... 30Using the remote to operate ‘Philips’television ............................................................... 30

Specifications .......................................................... 31

Troubleshooting ........................................... 32–33

Glossary ................................................................. 34–35

Contents

En

gli

s h

5

General Information

Composite videocable (yellow)

Audio cable(white, red)

FM wire antenna

MW loop antenna

Remote Controland two AAbatteries(12nc: 3139 228 61131)

AC power cord

VOL

Supplied accessories Care and safety information

Avoid high temperatures, moisture,water and dust– Do not expose the system, batteriesor discs to humidity, rain, sand orexcessive heat (caused by heatingequipment or direct sunlight). Alwayskeep the disc tray closed to avoid gettingdust on the lens.

Avoid condensation problem– The lens may cloud over when theplayer is suddenly moved from cold towarm surroundings, making it impossibleto play a disc. Leave the player in thewarm environment until the moistureevaporates.

Do not block the vents– Do not operate the DVD system in anenclosed cabinet and allow about 10 cm(4 inches) of free space all around theplayer for adequate ventilation.

10 cm(4 inches)

5 cm(2 inches)

5cm(2 inches)DVD Home Cinema System

PHILIPS

Care of disc– To clean a CD, wipe itin a straight line from thecentre toward the edgeusing a soft, lint-freecloth. Do not usecleaning agents, as theymay damage the disc.– Write only on the printed side of aCD-R/CD-RW and only with a soft felt-tipped pen.– Handle the disc by its edge, do nottouch the surface.

Care of the cabinet– Use a soft cloth slightly moistenedwith a mild detergent solution. Do notuse a solution containing alcohol, spirits,ammonia or abrasives.

Finding a suitable location– Place the player on a flat, hard, stablesurface.

En

glish

6

Connections

Step 1: Placing the speakersand subwoofer

Centre speaker

Front Speaker(Left)

Front Speaker(Right)

Rear Speaker(Left)

Rear Speaker(Right)

PassiveSubwoofer

For best possible surround sound, all thespeakers (except subwoofer) should beplaced at the same distance from thelistening position.

1 Place the front left and right speakers atequal distances from the TV and at anangle of approximately 45 degrees fromthe listening position.

2 Place the centre speaker above the TV orthe DVD system so that the centerchannel’s sound is localized.

3 Place the rear speakers at normallistening ear level facing each other orhang on the wall.

4 Place the subwoofer on the floor nearthe TV.

Helpful Hints:– To avoid magnetic interference, do notposition the front speakers too close toyour TV.– Allow adequate ventilation around theDVD system.

1 1

33 4

2

En

gli

s h

7

Step 2: Connecting speakersand subwoofer

Connections

FRONTRIGHT

FRONTLEFT

REARRIGHT

REARLEFT

SUBWOOFERFRONT CENTER

Front Speaker(Right)

Front Speaker(Left)

Rear Speaker(Right)

Rear Speaker(Left)

PassiveSubwoofer

CentreSpeaker

Connect the supplied speaker systemsusing the fixed speaker cables bymatching the colours of the jacks andspeaker cables.

Helpful Hint:– Ensure that the speaker cables arecorrectly connected. Improper connectionsmay damage the system due to short-circuit.

En

glish

8

Connections

Step 3: Connecting TV

32

1

OOFER MW

MW

32 1

OOFER

IMPORTANT!– You only need to make one videoconnection from the followingoptions, depending on thecapabilities of your TV.– Connect the DVD system directlyto the TV.

Using Composite Video jack

1 Use the supplied composite video cable(yellow) to connect the DVD system’sVIDEO OUT jack to the video inputjack (or labelled as A/V In, Video In,CVBS, Composite or Baseband) on theTV.

2 To hear the TV channels through thisDVD system, use the supplied audiocables (white/red) to connect AUDIOIN-TV jacks to the correspondingAUDIO OUT jacks on the TV.

3 Set the P-SCAN switch to ‘OFF’.

IMPORTANT!The progressive scan video quality isonly possible when using Pr/Cr Pb/Cb Y,and a progressive scan TV is required.

Using Component Video jack(Pr/Cr Pb /Cb Y)

1 Use a component video cables (red/blue/green - not supplied) to connect theDVD system’s Pr/Cr Pb/Cb Y jacks tothe corresponding Component videoinput jacks (or labelled as Pr Pb Y orYUV) on the TV.

2 To hear the TV channels through thisDVD system, use the supplied audiocables (white/red) to connect AUDIOIN-TV jacks to the correspondingAUDIO OUT jacks on the TV.

3 If you are using a Progressive Scan TV(TV must indicate Progressive Scan orProScan capability ), set the P-SCANswitch to ‘ON’. Otherwise, set it to ‘OFF’.

Helpful Hint:– You have to power off the DVD system orswitch to standby mode before changing theP-SCAN switch setting.

Option 1 Option 2

En

gli

s h

9

Connections

4

3

1

2

REARLEFT

SUBWOOFER

AUDIO INR L

VIDEOIN

TO TVINT IN

CH3 CH4

ANT IN

32 1

OOFER

RF coaxial cable to TV

IMPORTANT!If S-Video is used for DVD playback,the system’s VIDEO OUT setting willneed to be changed accordingly.Details are on page 23.

Using S-Video jack

1 Use an S-video cable (not supplied) toconnect the DVD system’s S-VIDEOOUT jack to the S-Video input jack(or labelled as Y/C or S-VHS) on the TV.

2 To hear the TV channels through thisDVD system, use the supplied audiocables (white/red) to connect AUDIOIN-TV) jacks to the correspondingAUDIO OUT jacks on the TV.


IMPORTANT!If your TV only has a single Antenna Injack (labelled as 75 ohm or RF In),you will need an RF modulator inorder to view DVD playback on theTV. See your electronics retailer orcontact Magnavox for details on RFmodulator availability and operations.

Using an accessory RF modulator

1 Use the supplied composite video cable(yellow) to connect the DVD system’sVIDEO OUT jack to the video inputjack on the RF modulator.

2 Use an RF coaxial cable (not supplied) toconnect ANTENNA OUT or TO TV jackon the RF modulator to the ANTENNAIN jack on the TV.

3 Connect the Antenna or Cable TVservice signal to the ANTENNA IN orRF IN jack on the RF modulator. (It mayhave been connected to your TVpreviously. Disconnect it from the TV).


Option 3 Option 4

Back of RF Modulator(example only)

Antenna orCable TV signal

En

glish

10

Connections

Step 4: Connecting FM/MWantennas

Step 5: Connecting thepower cord

1

2

FMantenna

MWantenna

fix the claw intothe slot

~ AC MAINS

FRONTRIGHT

FRONTLEFT

REARRIGHT

REARLEFT

SUBWOOFERFRONT CENTER

2

1

Power Outlet

1 Connect the supplied MW loop antennato the MW jack. Place the MW loopantenna on a shelf or attach it to a standor wall.

2 Connect the supplied FM antenna to theFM (75Ω) jack. Extend the FM antennaand fix its ends to the wall.

For better FM stereo reception, connectan external FM antenna (not supplied).

Helpful Hints:– Adjust the position of the antennas foroptimal reception.– Position the antennas as far as possiblefrom your TV, VCR or other radiation sourceto prevent unwanted interference.

After everything is connectedproperly,

1 Set the VOLTAGE SELECTOR to thelocal power line voltage.

2 Plug in the AC power cord to the poweroutlet.Never make or change any connectionswith the power switched on.

Helpful Hint:– Refer to the type plate on the rear orbottom of the system for identification andsupply ratings.

En

gli

s h

11

Connections (optional)

Connecting a VCR orCable/Satellite Box

Connecting digital audioequipment

FRONTRIGHT

FRONTLEFT

REARRIGHT

REARLEFT

SUBWOOFERFRONTCENTER

DIGITAL IN

(for example)CD Recorder

FRONTRIGHT

FRONTLEFT

REARRIGHT

REARLEFT


TO TVVIDEO

OUT IN

AUDIO

S-VIDEOIN

1

2 43

VCR or Cable/Satellite Box

Viewing and listening to the playback

1 Connect the VCR or Cable/Satellite Boxto the TV as shown.

2 Connect the DVD system’s AUDIO IN-AUX jacks to the AUDIO OUT jacks onthe VCR or cable/satellite box.

Before starting operation, press AUX onthe remote to select “AUX” in order toactivate the input source.

Using the VCR for recording DVDplayback

3 Connect the DVD system’s VIDEO OUTjack to the VIDEO IN jack on the VCR.

4 Connect the DVD system’s LINE OUTjacks to the AUDIO IN jacks on the VCR.This will allow you to make analogue stereo(two channel, right and left) recordings.

To view DVD playback whilerecording, you must connect the DVDsystem to your TV using S-VIDEO (asshown above) or Component(Pr/Cr Pb/Cb Y) video connection.

Digital Recording

1 Connect the DVD system’s DIGITALOUT-COAXIAL jack to the DIGITALCOAXIAL IN jack on a digital recordingdevice (such as Dolby Digital decoder,CD recorder).

Before starting operation, set theDIGITAL OUTPUT according to theaudio connection. (See page 24 “Settingthe digital output”).

Helpful Hints:– Some DVDs are copy-protected. Youcannot record the disc through a VCR ordigital recording device.– Always refer to the owner’s manual of theother equipment for complete connectionand usage details.

En

glish

12

Functional Overview

* = Press and hold the button for more than two seconds.

SOURCE

PLAY/PAUSE STOP PROG

PREV NEXT

VOLUME

PHONES

OPEN/CLOSESTANDBY-ON

1 89 0 !765432

Main unit and remote control

1 STANDBY ON– Switches to standby mode or turns on

the system.

2 Disc tray

3 OPEN/CLOSE 0 (DISC mode only)– Opens/Closes the disc tray.

4 System display panel

5 ÉÅ PLAY/PAUSE– DISC: starts/pauses playback.

6 S PREV / T NEXT– DISC: *searches backward/ forward or

selects a track.– TUNER: tunes the radio frequency

up/down.– TV: selects previous/next channel on

Philips TV (on remote only).

7 Ç STOP– Exits an operation.– DISC: stops playback or clears a

programme.– TUNER: *erases a preset radio station.

8 SOURCE– Selects the relevant active mode : TV/AV,

DISC, TUNER (FM/MW) or AUX.

9 PROG– DISC: starts programming.– TUNER: starts manual preset

programming.

0 VOLUME (VOL +-)– Adjusts the volume level.

! PHONES– Plugging in the headphones jack.

The speakers output will be cancelled.

En

gli

s h

13

* = Press and hold the button for more than two seconds.

Control buttons available on theremote only

@8

§

#

6

$

7

0

%^&* (

)¡™£≤

∞

≥

5

@ MUTE– Mutes or restores the volume.

# DISC MENU– Enters disc contents menu.

$ 1 2 3 4

– Selects movement direction in the menu.– Use 1 2 to select a preset radio station.

% SURROUND– Selects multichannel surround (Dolby

Digital, Dolby Pro Logic or Dolby ProLogic II) or stereo mode.

^ SOUND– Selects a sound effect.

Functional Overview

& REPEAT– Selects various repeat modes.

* REPEAT A-B– Repeats a specific section on a disc.

( SUBW +-– Adjusts subwoofer’s sound level.

REAR +-– Adjusts rear speakers’ sound level.

CENTER +-– Adjusts center speaker’s sound level.

TV VOL +-– Adjusts TV volume (Philips TV only).

) SLEEP– Sets the sleep timer function.

¡ DIM– Selects different levels of brightness for

display panel.

™ RESUME– Continues disc playback after an

interruption.

£ NIGHT (DVD mode only)– Optimises the dynamic of the sound

output

≤ OK– Confirms a selection.

∞ SYSTEM MENU (DISC mode only)– Enters or exits system setup menu.

§ Numeric Keypad (0-9)– Enters a track/title number of the disc.– Enters a number of a preset radio station.

≥ B– Switches to standby mode.– In TV mode, switches Philips TV on/off.

En

glish

14

Step 1: Inserting batteries intothe remote control

1 Open the battery compartment.

2 Insert two batteries type R06 or AA,following the indications (+-) insidethe compartment.

3 Close the cover.

Using the remote control tooperate the system

1 Aim the remote controldirectly at the remotesensor (iR) on the frontpanel.

2 Select the source youwish to control bypressing one of thesource select buttons onthe remote control (forexample TV/AV, TUNER.)

3 Then select the desiredfunction (for exampleÉÅ, S, T).

CAUTION!– Remove batteries if they areexhausted or if the remote is not tobe used for a long time.– Do not use old and new ordifferent types of batteries incombination.– Batteries contain chemicalsubstances, so they should bedisposed of properly.

Step 2: Setting the TV

IMPORTANT!Make sure you have completed allthe necessary connections. (See pages8–9 “Connecting TV”).

1 Press SOURCE control until “DISC”appears on the display panel (or pressDISC on the remote).

2 Turn on the TV and set to the correctvideo-in channel. You should see the blueDVD background screen on the TV. Usually this channel is between thelowest and highest channels and may becalled FRONT, A/V IN, or VIDEO. Seeyour TV manual for more details. Or, you may go to channel 1 on yourTV, then press the Channel down buttonrepeatedly until you see the Video Inchannel. Or, the TV remote control may have abutton or switch that chooses differentvideo modes. Or, set the TV to channel 3 or 4 if youare using an RF modulator.

Getting Started

SOURCE


PREV NEXT

VOLU

En

gli

s h

15

Selecting the colour system thatcorresponds to your TV

In order for a DVD to play on this DVDsystem, the colour system of the DVD,the TV and the DVD player should match.Before changing the TV system, determinethe colour system of your TV.

1 In disc mode, press SYSTEM MENU. Use the 1 2 3 4 keys on the remoteto navigate in the menu.

2 Highlight icon and press 4.

Move to and press 2.Move to TV SYSTEM and press 2.

AUTONTSCPAL

SET TV STANDARD

TV SHAPE

TV SYSTEMVIDEO OUT

SCR SAVER

AUTO – Select this if the connected TVis compatible with both NTSC and PAL(multi-system). The output format will bein accordance with the video signal of thedisc.

NTSC – Select this if the connected TVhas the NTSC system. It will change thevideo signal of a PAL disc (VCD only) andoutput it to NTSC format.

PAL – Select this if the connected TV hasthe PAL system. It will change the videosignal of an NTSC disc and output it toPAL format.

3 Press 34 to select a setting and pressOK to confirm. Follow the instructions show on theTV to confirm the selection (if any). If a blank/distorted TV screen appears,wait for 15 seconds for auto recovery.

Setting the TV shape

Set the aspect ratio of the DVD Playeraccording to the TV you have connected.The format you select must be availableon the disc. If it is not, the setting for TVdisplay will not affect the picture duringplayback.



Move to and press 2.Move to TV SHAPE and press 2.

4:3 PS4:3LB16:9

SET TV DISPLAY MODE

TV SHAPETV SYSTEM

VIDEO OUT

SCR SAVER

4:3 PS (PanScan) –Select this if you havea conventional TV andwant both sides of thepicture to be trimmedor formatted to fit your TV screen.

4:3 LB (letterbox) –Select this if you have aconventional TV. In thiscase, a wide picture withblack bands on the upperand lower portions of the TV screen willbe displayed.

16:9 – Select this ifyou have a wide-screen TV.

3 Press 34 to select asetting and press OK to confirm.

Getting Started

TIPS: To return to the previous menu, press 1.To remove the menu, press SYSTEM MENU.

En

glish

16

Step 3: Setting the speakers

You can adjust the delay time (centre andrear speakers only) and volume level forindividual speakers. These adjustments letyou optimise the sound according to yoursurroundings and setup.

Test Tone - Turning on/off

If you have turned on the test tone, thetest signal will be automatically generatedto help you judge the sound level of eachspeaker.



Move to and press 2.Move to TEST TONE and press 2.

OFFON

DIGITAL OUT

CNTR DELAY

NIGHT MODE

REAR DELAY

TEST TONE

TEST TONE

3 Press 34 to select a setting.

Adjusting the delay time

4 Press 34 to highlight one of the optionsbelow at a time, then press 2.

DIGITAL OUT

CNTR DELAYNIGHT MODE

REAR DELAYTEST TONE

SET CENTER DELAY

OFF 5ms

CNTR DELAY – Select this to set thedelay time in relation to the listeningposition/distance for the center speaker(5ms, 3ms, 2ms, 1ms or OFF).

REAR DELAY – Select this to set thedelay time in relation to the listeningposition/distance for rear speakers (15ms,12ms, 9ms, 6ms, 3ms or OFF).

5 Press 1 2 to adjust the settings thatbest suit your surround sound needs.

6 Press OK to confirm.

Helpful Hint:– Use longer delay time settings when therear speakers are closer to the listener thanthe front speakers.

Adjusting the speaker output levels

You can adjust the rear speakers, centrespeaker and subwoofer output levels bycomparing the sound from the frontspeakers.

Press the respective buttons on theremote (REAR +-, CENTER +-and SUBW +-) to adjust the outputlevel between -15dB ~ 10dB.

Helpful Hint:– If you have selected Stereo mode,adjusting the center and rear speakers’volume level will have no effect.

Getting Started


En

gli

s h

17

Step 4: Setting languagepreferences

You can select your preferred languagesettings so that this DVD system willautomatically switch to the language for youwhenever you load a disc. If the languageselected is not available on the disc, thedisc’s default setting language will be usedinstead. The OSD (on-screen display)language for the system menu will remainas you set it, regardless of various disclanguages.

On-screen display (OSD) language



Move to and press 2.Move to MENU LANG and press 2.

ENGLISHFRENCHSPANISH

PARENTAL

PASSWORD

DEFAULTS

MENU LANG

SET OSD LANGUAGE

3 Press 34 to select a language and pressOK to confirm.

Audio, Subtitle and Disc menulanguages

1 In disc mode, stop playback and pressSYSTEM MENU. Use the 1 2 3 4 keys on the remoteto navigate in the menu.


Move to and press 2.Move to highlight one of the optionsbelow at a time, then press 2.– AUDIO (disc’s soundtrack)– SUBTITLE (disc’s subtitles)– DISC MENU (disc’s menu)

AUDIOSUBTITLEDISC MENU

ENGLISH

ENGLISH

ENGLISH

GOTO LANGUAGE SETUP PAGE

3 Press 34 to select a language and pressOK to confirm.

4 Repeat steps 2~3 for other settings.

Getting Started


En

glish

18

Disc Operations

IMPORTANT!– If the inhibit icon (or X) appearson the TV screen when a button ispressed, it means the function is notavailable on the current disc or atthe current time.– DVD discs and players aredesigned with regional restrictions.Before playing a disc, make sure thedisc is for the same zone as yourplayer.– Do not push on the disc tray orput any objects other than discs onthe disc tray. Doing so may causethe disc player to malfunction.

Playable discsYour DVD home cinema system willplay:– Digital Versatile Discs (DVDs)– Video CDs (VCDs)– Super Video CDs (SVCDs)– Audio Compact Discs (CDs)– MP3 discs, picture (Kodak, JPEG) files

on CD-R(W)– JPEG/ISO 9660 format– Maximum 12 characters display– Supported sampling frequencies :

32 kHz, 44.1 kHz, 48 kHz– Supported Bit-rates : 32~256 (kbps),

variable bit rates

Region CodesDVDs must be labelled for ALLregions or for Region 4 in orderto play on this DVD system. Youcannot play discs that are labelledfor other regions.

Helpful Hints:– It may not be possible to play CD-R/RW inall cases due to the type of disc or conditionof the recording.– If you are having trouble playing a certaindisc, remove the disc and try a different one.Improperly formatted discs will not play onthis DVD system.

Playing discs

1 Press SOURCE control until “DISC”appears on the display panel (or pressDISC on the remote).

2 Turn on the TV power and set to thecorrect Video In channel. (See page 14“Setting the TV”). You should see the blue DVDbackground screen on the TV.

3 Press the OPEN/CLOSE 0 to open thedisc tray and load a disc, then press thebutton again to close the disc tray. Make sure the disc label is facing up.For double-sided discs, load the side youwant to play face up.

4 Press ÉÅ to start playback. If a disc menu shows on the TV, seenext page on “Using the Disc Menu”. If the disc is locked by parental control,you must enter your four-digit password(see page 26–27).

ALL

4

TIPS: The operating features described here might not be possible for certain discs. Always referto the instructions supplied with the discs.

En

gli

s h

19

Disc Operations

Using the Disc MenuDepending on the disc, a menu mayappear on the TV screen once you load inthe disc.

To select a playback feature or item Use the 1 2 3 4 keys or numeric

keypad (0-9) on the remote, then pressOK to start playback.

To access the menu Press DISC MENU on the remote.

For VCDs with Playback Control(PBC) feature (version 2.0 only)

During playback, pressing DISC MENUwill return to the menu screen (if PBC ison). Use S / T to select a playoption and press OK to confirm or usethe numeric keypad (0-9).

Basic playback controls

Pausing playback Press ÉÅ.

To resume normal playback, pressÉÅ again.

Selecting another track/chapter Press S / T or use the numeric

keypad (0-9) to key in a track/chapternumber. If repeat mode is active, pressing S/ T will replay the same track/chapter.

Searching backward/forward Press and hold S / T, then pressÉÅ to resume normal playback. While searching, pressing and holding S / T again will increase thesearch speed.

Stopping playback Press Ç.

Resuming playback from the laststopped point (DVD/VCD/CD)

When play is stopped and the disc hasnot been ejected, press RESUME.

To cancel the resume mode When play is stopped, press Ç again.

Helpful Hints:– Open the disc tray or disconnect the DVDsystem from the power supply will cancel theresume option.– For VCD disc, pressing RESUME button willturn off the PBC mode and playback willstart from the beginning.


En

glish

20

Disc Operations

Selecting various repeatfunctions

Repeat play mode

While playing a disc, press REPEAT toselect various repeat mode. "REPEAT” icon will appear on the display,except REPEAT OFF mode.

DVDCHAPTER REPEAT ON ™TITLE REPEAT ON ™ REPEAT-OFF

VCD/SVCD/CDREPEAT-ONE (repeat the currenttrack) ™ REPEAT-ALL ™

REPEAT-OFF

MP3REPEAT-ONE ™ REPEAT-ALBUM ™REPEAT-ALL ™ REPEAT-OFF

Helpful Hint:– For VCD, repeat playback is not possible ifthe PBC mode is switched on.

Repeating a section within achapter/track

1 While playing a disc, press REPEAT A-Bat the starting point.

2 Press REPEAT A-B again at the point toend the section. The section A and B can be set onlywithin the same chapter/track. The section will now repeatcontinuously.

3 Press REPEAT A-B again to resumenormal playback.

Programme favourite tracks(audio CDs and VCDs)You can play the contents of the disc inthe order you want by programming theorder of the tracks to be played. Up to 99tracks can be stored.

1 Stop playback, then press PROG on thefront panel to enter programme mode.

2 Use the numeric keypad (0-9) to entera valid track number. "FULL" will appear if you haveprogrammed 99 tracks.

3 Press OK to store the track.

4 Repeat steps 2~3 to select othertracks.

5 Press ÉÅ to start programme playback.

6 Press Ç to stop playback or exitprogramme mode.

Clearing the programme

Stop playback, then press the Ç again. "PROG CLR" appears.

Helpful Hints:– If the DVD system is disconnected fromthe power supply, it will erase theprogramme.– For VCD, the programme option is onlypossible if the PBC mode is turned off.


En

gli

s h

21

Disc Operations

Using the menu bar toprogramme

IMPORTANT!You have to turn on your TV and setto the correct Video In channel. (Seepage 14 “Setting the TV”).

1 Stop playback, then press SYSTEMMENU. The menu bar will appear across thetop of the TV screen.

2 Press 1 2 to select and press 4 toenter the programme menu.

PROGRAM P 00 : 00

3 Use the numeric keypad (0-9) to enterthe track number to be programmed. "FULL" will appear if you haveprogrammed 99 tracks.

4 Press ÉÅ to start programme playback.

To clear the programme Stop playback, then press Çagain.

Playing MP3/Picture disc(Kodak, JPEG)

IMPORTANT!You have to turn on your TV and setto the correct Video In channel. (Seepage 14 “Setting the TV”.)

1 Load an MP3/Picture (Kodak, JPEG) disc. The disc reading time may exceed30 seconds due to the complexity ofthe directory/ file configuration.

2 Playback will start automatically. The album/picture menu appears onthe TV screen. If not, press DISC MENUon the remote.

3 Use 1 2 3 4 keys to select a desiredalbum, then press OK to open the folder(for MP3 disc only). The title menu appears on the TVscreen.

4 Use 1 2 3 4 keys to select a desiredtitle, then press OK to start playback.

You can also use the numeric keypad(0-9) to enter your choice.

During playback, you can; Press S / T to select another title/

picture in the current folder.

Use 1 2 3 4 keys to rotate/ flip thepicture files.

Press ÉÅ to pause/resume playback.

5 To stop playback, press Ç.

Helpful Hints:– Due to the recording nature of Digital AudioMP3 (DAM), only digital audio music will play.– It is normal to experience an occasional“skip” while listening to your MP3 discs.– It may not be possible to play certain MP3or JPEG disc due to the configuration andcharacteristics of the disc or condition of therecording.– For multi-session discs with differentformats, only the first session will be available.


En

glish

22

DVD Setup Menu Options

Using the menu barYou can continue a number of operationsdirectly via the multiple menu bars on theTV screen without interrupting the discplayback. The exception is when youenter (SETUP MENU), after which theplayback will pause.

,

1 In disc mode, press SYSTEM MENU. The menu bar will appear across thetop of the TV screen.

2 Use 1 2 3 4 keys on the remote tonavigate in the menu. Press 1 2 to move through the menu bar. Press 4 to enter the selection. Ifthere are multiple choices available,press 4 repeatedly to select.

3 Press SYSTEM MENU again to removethe menu.

IMPORTANT!– Some operations may be differentor restricted, depending on the discformat. Refer to the jacket or caseof the disc you are playing.– Changing the Subtitle Languageand Audio Language from the menubar will only apply to the currentdisc, it will not change the defaultpreset.

SUBTITLESelect a subtitle language available on the DVD.

AUDIODVD : Select an audio soundtrack language available on the DVD. VCD : Select audio channels : LEFT VOCAL, RIGHT VOCAL, MONO LEFT, MONO RIGHT or STEREO.

SLOW MOTIONSelect a slow playback speed. The volume will be muted. To resume normal playback, press ÉÅ.DVD : SF x1/2, SF x1/4, SF x1/8, SR x1/2, SR x1/4, SR x1/8, OFF.VCD : SF x1/1, SF x1/2, SF x1/3, OFF. (SF - Slow Forward, SR- Slow Rerverse)

FAST REVERSE (FR)DVD / MP3 : FR x2, FR x4, FR x6, FR x8, OFF.VCD /CD : FR x1, FR x2, FR x3, FR x4, OFF.

FAST FORWARD (FF) DVD / MP3 : FF x2, FF x4, FF x6, FF x8, OFF.VCD / CD : FF x1, FF x2, FF x3, FF x4, OFF.

Select a search speed (FR - backward, FF - forward). The volume will be muted. To resume normal playback, press ÉÅ.

STATUSAllows viewing of the current status of the disc. The information will vary depending on the disc format.

Available on DVD onlyTITLE SEARCH (TITLE XX:YY")Select a Title for playback to begin. CHAPTER SEARCH (CHAPTER XX:YY) Select a Chapter for playback to begin.

"XX" - current title/chapter number."YY" - total number of title/chapter.Use the numeric keypad (0-9) to change the "XX" number, then press OK.

TIME SEARCH (TIME __:__:__) Use the numeric keypad (0-9) to enter the time (hours, minutes and seconds) at which you want playback to begin (for DVD or VCD with PBC-OFF only).

ZOOM Select an enlarge picture ratio : x1.5, x2 or x4, thenpress OK to confirm. You can use 1 2 3 4 keys to move within the enlarged picture on the TV. To resume normal playback, select 'ZOOM OFF' from the menu.

ANGLE (for DVD only)Select to view the same scene from different anglesif the DVD is recorded with multiple angles.

STEP FORWARDSelect to advance the still picture one frameforward. To resume normal playback, press ÉÅ.

PBC ON/OFF (for VCD 2.0 with PBC feature)Select between PBC On and Off.'PBC OFF' - the playback will start automatically.

PROGRAM Stop playback, then select this to enter the program menu (see page 21 "Using the menu bar to programme").

'PBC ON' - the disc menu (if available) will appear on the TV. Use the numeric keypad (0-9) to enter your choice.

En

gli

s h

23


Using the Setup MenuThis DVD setup is carried out via the TV,enabling you to customise the DVDsystem to suit your particularrequirements.

4

,

1 In disc mode, press SYSTEM MENU. Playback will pause.

2 Highlight icon and press 4 to enterthe setup menu. Then press 3 4 toselect one of the setup menu options andpress 2 to enter the menu.

SETUP MENU

Picture Setup

Sound Setup

Language Setup

Feature Setup

3 Use 1 2 3 4 keys on the remote tonavigate in the menu.

4 Press OK to confirm your selection.

NOTE:Some of the features in the SetupMenu are described in “GettingStarted”.

Setting the video output

Choose the type of video output thatmatches the video connection betweenthe DVD system and your TV.

Stop playback, then follow the steps of“Using the Setup Menu” and select :

> VIDEO OUT

S-VIDEOPR PB Y / SCART

SET VIDEO OUTPUT

TV SHAPE

TV SYSTEM

VIDEO OUTSCR SAVER

S-VIDEOSelect this if you have connected theDVD system to your TV using theS-Video jack.

PR PB Y / SCARTSelect this if you have connected theDVD system to your TV using componentvideo jacks. (SCART – this feature is notavailable for this model).

Helpful Hint:– You do not need to adjust the video outputsetting if you are using CVBS jack (yellow) toconnect the DVD system to your TV.


En

glish

24


Screen Saver – turning on/off

The screen saver will help to preventyour TV display device from becomingdamaged.

Follow the steps of “Using the SetupMenu” and select :

> SCR SAVER

OFFON

SCREEN SAVER SETTING

TV SHAPE

TV SYSTEM

VIDOT OUT

SCR SAVER

OFFSelect this to disable the screen saverfunction.

ONSelect this if you wish to turn off the TVscreen when play is stopped or pausedfor more than five (5) minutes.

Setting the digital output

Set Digital Output according to theoptional audio equipment you connected.


> DIGITAL OUT

ALLPCM 96KPCM 48KOFF

SELECT AUDIO OUTPUT

DIGITAL OUT

CNTR DELAY

NIGHT MODE

REAR DELAY

TEST TONE

ALLSelect this if you have connected thedigital output to an optional piece ofaudio equipment that has a multichanneldecoder.

PCM 96 kHzSelect this if the optional audioequipment is capable of processing digitalsignal input with sampling rates of 96 kHz.However, if the sound output is distortedor there is no sound, select ‘48 kHz’instead.

PCM 48 kHzSelect this if the optional audioequipment is incapable of processing96 kHz digital signal input. The signal willthen be converted to a standard signalwith sampling rates of 48 kHz.

OFFSelect this to deactivate the digitaloutput.

Helpful Hint:– Analogue signal will also be availablethrough the digital output.


En

gli

s h

25


Night mode – turning on/off

When activated the night mode, the highvolume outputs will be softened and lowvolume outputs will be brought upwardto an audible level. It is useful forwatching your favourite action moviewithout disturbing others at night.This function can also be accessed via theNIGHT button on the remote.


> NIGHT MODE

SET NIGHT MODE

CNTR DELAY

REAR DELAY

TEST TONE

OFFON

DIGITAL OUT

NIGHT MODE

OFFSelect this when you want to enjoy thefull dynamic of surround sound.

ONSelect this to level out the volume.This feature is only available for movieswith Dolby Digital mode.

Restoring to original settings

Setting the DEFAULT function will resetall options and your personal settings tothe factory defaults, except yourpassword for Parental Control.


> DEFAULTS

RESET

LOAD FACTORY SETTINGS

PARENTAL

PASSWORD

DEFAULTSMENU LANG

RESETPressing 2 to select RESET, all settingswill now reset to factory defaults.


En

glish

26


Restricting playback by ParentalControl

Some DVDs may have a parental levelassigned to the complete disc or tocertain scenes on the disc. This featurelets you set a playback limitation level.The rating levels are from 1 to 8 and arecountry dependent. You can prohibit theplaying of certain discs that are notsuitable for your children or have certaindiscs played with alternative scenes.


2 Select icon and press 4.

Move to and press 2.Move to PARENTAL and press 2.

__ __ __ __ Enter code

ENTER PARENTAL PASSWORD

PARENTALPASSWORD

MENU LANG

DEFAULTS

3 Use the numeric keypad (0-9) to enter‘1234’ (default password) when you areasked to enter the four-digit password.You will have to enter the same code,exactly, twice. To change the password, see page 27“Changing the password”.

4 Select a rating level and press OK. DVDs that are rated above the levelyou selected will not play unless youenter your four-digit password andchoose a higher level rating. To disable Parental Controls and haveall discs play, choose ‘NO PARENTAL’.

SET PARENTAL CONTROL

PARENTALPASSWORD

MENU LANG

DEFAULTS

1 G3 PG4 PG 136 PG-R7 NC-178 ADULTNo PARENTAL


Rating explanationsNO PARENTAL – All discs will play.

8 ADULT – Mature material; should be viewedonly by adults due to graphic sexualmaterial, violence, or language.

7 NC-17 – No children under age 17; notrecommended viewing for childrenunder age 17.

6 PG-R – Parental Guidance - Restricted;recommended that parents restrictchildren under 17 from viewing orallow to view only when supervised bya parent or adult guardian.

4 PG13 – Material is unsuitable for childrenunder age 13.

3 PG – Parental Guidance suggested.1 G – General Audience; recommended as

acceptable for viewers of all ages.

Helpful Hints:– VCD, SVCD, CD have no level indication, soparental control has no effect on these typeof discs. This also applies to most illegalDVDs.– Some DVDs are not encoded with a ratingthough the movie rating may be printed onthe Disc cover. The rating level feature doesnot prohibit play of such Discs.


En

gli

s h

27


Changing the password

You can change the four-digit passwordused for Parental Control. Enter yourfour-digit password to play a prohibiteddisc or if prompted for a password. Thedefault password is ‘1234.’


2 Select icon and press 4.

Move to and press 2.Move to PASSWORD and press 2.

__ __ __ __Enter old code

PLEASE ENTER OLD PASSWORD

PARENTAL

PASSWORDMENU LANG

DEFAULTS

3 Use the numeric keypad (0-9) to enteryour original four-digit password at “Enterold code”. If you are asked to enter the code forthe first time, key in ‘1234’. If you forget your password, press Çfour times to restore to the defaultpassword (1234).

4 Enter your new four-digit password.

__ __ __ __Enter new code

PLEASE ENTER NEW PASSWORD

PARENTAL

PASSWORDMENU LANG

DEFAULTS

5 Enter the same new four-digit passwordagain.

__ __ __ __Confirm code

Confirm :

PARENTAL

PASSWORDMENU LANG

DEFAULTS



En

glish

28

Tuner Operations

IMPORTANT!Make sure the FM and MWantennas are connected.

Tuning to radio stations

1 Press TUNER on the remote (or pressSOURCE control on front panel) toselect “FM” or “MW”.

2 Press and hold S / T on theremote until the frequency indicationstarts to change, then release. The next radio station will tuneautomatically.

3 To tune a weak station, press S / Tbriefly and repeatedly until an optimalreception is found.

Presetting radio stationsYou can store up to 40 preset radiostations in the memory, starting from FMand followed by MW bands.

Automatic presetting

You can store all available radio stationsautomatically.

In tuner mode, press and hold PROGuntil "AUTO PROG" appears. All the available radio stations withstrong transmission signal will be stored. Automatic preset will begin frompreset (1) and all your former presets willbe overridden. If it has reached 40 presets, “PROGFULL” appears. Once completed, “PROG END”appears.

AUTO PROG

Manual presetting

You can choose to store only yourfavourite radio stations.

1 Tune to your desired radio station (see“Tuning to a radio station”).

2 Press PROG. “PROGRAM” icon appears.

3 Use the numeric keypad (0-9) toselect a preset number. If “PROGRAM” icon goes off before youselect the desired preset number, pressPROG again.

4 Press PROG again to store.

5 Repeat steps 1~4 to store other radiostations.

Helpful Hints:– If you attempt to programme more than40 preset radio stations, “PROG FULL”appears.– The system will exit presetting mode if nobutton is pressed within five seconds.

Selecting a preset radiostation

Press 1 2 or use the numeric keypad(0-9) to select a preset number. The preset number, radio frequency,and waveband will appear.

Deleting a preset radio station

Press and hold Ç until “PXX CLR”appears. The current preset radio station willbe deleted.

En

gli

s h

29

Changing tuning grid(not available for all versions)

In some countries, the frequency stepbetween adjacent channels in the MWband is 9 kHz (10 kHz in some areas).The preset frequency step in the factoryis 9 kHz.

IMPORTANT!Changing the tuning grid will eraseall previously stored preset radiostations.

Press and hold down PLAY/PAUSE ÉÅbutton on front panel for more than fiveseconds. The display will show "GRID 9" or"GRID 10".

Helpful Hints:– GRID 9 and GRID 10 indicate that thetuning grid is in step of 9 kHz and 10 kHzrespectively.– The FM tuning grid also will be changedfrom 50 kHz to 100 kHz or vice versa.

Setting the Sleep TimerThe sleep timer enables the system toswitch to standby mode automatically at apreset time.

Press SLEEP repeatedly until it reachesthe desired preset turn-off time. The selections are as follows (time inminutes):

15 ™ 30 ™ 45 ™ 60 ™ 90 ™ 120™ OFF ™ 15 …

“SLEEP” icon will show on the display,except if "OFF" is selected.

To check or change the setting Press SLEEP once to show the

remaining time before switching off.If you continue pressing the SLEEPbutton, the next Sleep Timer option willappear.

To cancel the sleep timer Press SLEEP repeatedly until "OFF"

appears or press the STANDBY ONbutton.

Tuner Operations Other Functions

En

glish

30

Sound Control

IMPORTANT!For proper surround sound, makesure the speakers and subwoofer areconnected (see page 7).

Selecting surround sound

Press SURROUND to selectmultichannel surround or stereo mode. The availability of the various surroundsound modes depends on the number ofspeakers used and the sound available onthe disc. The centre and surround speakersoperate only in Multi-channel surroundmode. The available output modes for multi-channel include: Dolby Digital, Dolby ProLogic or Dolby Pro Logic II surroundsound. Stereo broadcasts or recordings willproduce some surround channel effectswhen played in a surround mode.However, mono (single channel sound)sources will not produce any sound fromthe rear speakers.

Selecting digital sound effects

Select a preset digital sound effects thatmatches your disc’s content or thatoptimises the sound of the musical styleyou are playing.

Press SOUND to select the availablesound effect.

When playing movie discs, you can select:CONCERT, DRAMA, ACTION or SCI-FI.

When playing music discs or while inTV/AV, TUNER or AUX mode, you canselect: ROCK, DIGITAL, CLASSIC orJAZZ.

Helpful Hint:– For flat sound output, select CONCERT orCLASSIC.

Volume control Adjust VOLUME control (or press

VOL +/-on the remote) to increaseor decrease the volume level. "VOL XX" appears. “XX” denotes thevolume level.

To listen through the headphones Connect the headphones plug to the

PHONES socket at the front of theDVD system. The speakers will be mute.

To turn off the volume temporarily Press MUTE.

Playback will continue without soundand "MUTE" appears. To restore the volume, press MUTEagain or increase the volume level.

Dimming system’s displayscreen

In any active mode, press DIM to selectdesired brightness : HIGH, MID or LOW.

Using the remote to operate‘Philips’ television

1 Press TV/AV.

2 Press S / T or use the numerickeypad (0-9) to select the TV’s channel.

3 Press TV VOL +/- to adjust the TV’svolume level.

4 Press B to turn off your TV.

Helpful Hint:– When listening to TV/AV or AUXprogrammes, press the respective TV/AV orAUX button on the remote in order for thesound to be heard.

Other Functions

En

gli

s h

31

AMPLIFIER SECTIONOutput power 3000 W PMPO- Front 30 W RMS / channel- Rear 30 W RMS / channel- Centre 30 W RMS- Subwoofer 50W RMSFrequency Response 180 Hz – 14 kHz / ±3 dBSignal-to-Noise Ratio > 60 dB (A-weighted)Input Sensitivity- AUX In 400 mV- TV In 400 mV1 8ohm, 1 kHz, 10% THD

TUNER SECTIONTuning Range FM 87.5 – 108 MHz

MW 531 – 1602 kHz(9 kHz)MW 530 – 1710 kHz(10 kHz)

26 dB Quieting Sensitivity FM 20 dBf26 dB Quieting Sensitivity MW 5000 µV/mImage Rejection Radio FM 25 dB

MW 28 dBIF Rejection Ratio FM 60 dB

MW 24 dBSignal-to-Noise Ratio FM 55 dB

MW 40 dBMW Suppression Ratio FM 30 dBHarmonic Distortion FM Mono 3%

FM Stereo 3%MW 5%

Frequency Response FM 180 Hz – 10 kHz /±6 dB

Stereo Separation FM 26 dB (1 kHz)Stereo Threshold FM 23.5 dB

DISC SECTIONLaser Type SemiconductorDisc Diametre 12cm / 8cmVideo Decoding MPEG-2 / MPEG-1Video DAC 10 BitsSignal System PAL / NTSCVideo Format 4:3 / 16:9Video S/N 56 dB (minimum)Composite Video Output 1.0 Vp-p, 75 ΩS-Video Output Y - 1.0 Vp-p, 75 Ω

C - 0.286 Vp-p, 75 ΩAudio DAC 24 Bits / 96 kHzFrequency Response 4 Hz – 20 kHz (44.1 kHz)

4 Hz – 22 kHz (48 kHz)4 Hz – 44 kHz (96 kHz)

Digital Output SPDIF (Sony Philipsdigital interface) Coaxial

- PCM IEC 60958- Dolby Digital IEC 60958, IEC 61937

MAIN UNITPower Supply Rating 110–127 / 220–240V;

50/600 Hz SwitchablePower Consumption 120 WDimensions (w x h x d) 435 x 48 x 360 (mm)Weight 4.07 kg

SPEAKERSFront/Rear speakersSystem 2-way, Bass Reflex systemImpedance 8 ΩSpeaker drivers 2 x 3” FR, 1 3/4” piezoFrequency response 120 Hz – 20 kHzDimensions (w x h x d) 90 x 90 x 87 (mm)Weight 0.53 kg each

CENTRE SPEAKERSystem 3-way, Bass Reflex systemImpedance 8 ΩSpeaker drivers 2 x 3” FR, 1 3/4” piezoFrequency response 120 Hz – 20 kHzDimensions (w x h x d) 90 x 90 x 87 (mm)Weight 0.53 kg

PASSIVE SUBWOOFERImpedance 4 ΩSpeaker drivers 6 1/2” wooferFrequency response 30 Hz – 120 HzDimensions (w x h x d) 210 x 220 x 350 (mm)Weight 3.57 kg

Specifications subject to change without priornotice

Specifications

En

glish

32

WARNINGUnder no circumstances should you try to repair the system yourself, as thiswill invalidate the warranty. Do not open the system as there is a risk ofelectric shock.

If a fault occurs, first check the points listed below before taking the system forrepair. If you are unable to remedy a problem by following these hints, pleaseconsult your dealer or Magnavox for help.

Troubleshooting

Problem Solution

– Check if the AC power cord is properlyconnected.

– Press the STANDBY ON on the front of theDVD system to turn on the power.

– Refer to your TV’s manual for correct Video Inchannel selection. Change the TV channel untilyou see the DVD screen.

– Press DISC on the remote.– Switch the P-SCAN at the back panel to “OFF”

position if you are not using a Progressive ScanTV.

– If this happens when you changing the settingof the ‘TV SYSTEM’, wait for 15 seconds forauto recovery.

– Check the video connection.– Sometimes a small amount of picture distortion

may appear. This is not a malfunction.– Clean the disc.

– The aspect ratio is fixed on the DVD disc.– Depending on the TV, it may not be possible to

change the aspect ratio.

– Adjust the volume.– Check the speaker connections and settings.– Disconnect the headphones.– Press the correct source button on the

remote (TV/AV or AUX, for example) tochoose the equipment that you want to hearthrough the DVD system.

– Disconnect the power cord from the poweroutlet for a few minutes. Reconnect thepower cord and try to operate again as usual.

– Press and hold SOURCE button on the frontpanel for more than two seconds, then pressPLAY button.

No power.

No picture.

Completely distorted picture orblack/white picture.

The aspect ratio of the screen cannotbe changed even though you have setthe TV display.

No sound or distorted sound.

The DVD system does not work.

The disc tray cannot open and “TRAYLOCKED” is displayed.

En

gli

s h

33

Troubleshooting

Problem Solution

– Insert a readable disc with the playback sidefacing down. The DVD+R/CD-R must befinalised.

– Check the disc type, colour system and regioncode.

– Check for any scratches or smudges on the disc.– Press SYSTEM SETUP to turn off the setup

menu screen.– You may need to enter the password in order

to change the parental control rating level orto unlock the disc for playback.

– Moisture has condensed inside the system.Remove the disc and leave the system turnedon for about an hour.

– The features may not be available on the DVD.– Changing the language for the sound or subtitle

is prohibited on the DVD.

– Press CENTER +- or REAR +- to adjustthe volume level.

– Make sure the centre and rear speakers areconnected correctly.

– Press SURROUND button to select a correctsurround sound setting.

– Make sure the source you are playing isrecorded or broadcast in surround sound(DPL II, Dolby Digital, etc.)

– If the signal is too weak, adjust the antenna orconnect an external antenna for better reception.

– Increase the distance between the system andyour TV or VCR.

– Tune in to the correct frequency.– Place the antenna farther away from any

equipment that may be causing the noise.

– Select the source (DISC or TUNER, forexample) before pressing the function button(ÉÅ, S, T).

– Reduce the distance between the remotecontrol and the system.

– Replace the batteries with new ones.– Point the remote control directly toward the

IR sensor.– Check that the batteries are loaded correctly.

– Press DIM again.

– Place the DVD system as far away as possiblefrom electrical devices that may be causinginterference.

The DVD player does not start playback.

Cannot activate some features, such asAngles, Subtitles, or multi-languageAudio.

There is no sound from the centre andrear speakers.

Radio reception is poor.

The remote control does not functionproperly.

The display panel is dark.

Low hum or buzz sound.

En

glish

34

Analogue: Sound that has not been turnedinto numbers. Analogue sound varies, whiledigital sound has specific numerical values.These jacks send audio through two channels,the left and right.

Aspect ratio: The ratio of vertical andhorizontal sizes of a displayed image. Thehorizontal vs. vertical ratio of conventional TVs.is 4:3, and that of wide-screens is 16:9.

AUDIO OUT Jacks: Red and white jacks onthe back of the DVD System that send audioto another system (TV, Stereo, etc.)

Bit Rate: The amount of data used to hold agiven length of music; measured in kilobits persecond, or kbps. Or, the speed at which yourecord. Generally, the higher the bit rate, orthe higher the recording speed, the better thesound quality. However, higher bit rates usemore space on a Disc.

Chapter: Sections of a picture or a musicpiece on a DVD that are smaller than titles.A title is composed of several chapters. Eachchapter is assigned a chapter number enablingyou to locate the chapter you want.

Component Video Out Jacks: Red, blue,and green jacks on the back of the DVDSystem that send high-quality video to a TVthat has Component Video In jacks (R/G/B,Y/Pb/Pr, YUV, etc.)

Disc menu: A screen display prepared forallowing selection of images, sounds, subtitles,multi-angles, etc recorded on a DVD.

Digital: Sound that has been converted intonumerical values. Digital sound is availablewhen you use the DIGITAL AUDIO OUTCOAXIAL or OPTICAL jacks. These jackssend audio through multiple channels, insteadof just two channels as analogue does.

Dolby Digital: A surround sound systemdeveloped by Dolby Laboratories containingup to six channels of digital audio (front leftand right, surround left and right, centre andsubwoofer).

Dolby Pro Logic II: It creates five full-bandwidth output channels from two-channelsources. Decode only systems that derive 5.1channels instead of the conventional fourchannels of Dolby Pro Logic surround sound.

JPEG: A very common digital still pictureformat. A still-picture data compression systemproposed by the Joint Photographic ExpertGroup, which features small decrease in imagequality in spite of its high compression ratio.

MP3: A file format with a sound datacompression system. “MP3” is the abbreviationof Motion Picture Experts Group 1 (orMPEG-1) Audio Layer 3. By using the MP3format. One CD-R or CD-RW can containabout 10 times more data then a regular CD.

Parental control: Limits Disc play accordingto the age of the users or the limitation level ineach country. The limitation varies from discto disc; when it is activated, playback will beprohibited if the software’s level is higher thanthe user-set level.

PCM (Pulse Code Modulation): A systemfor converting analog sound signal to digitalsignal for later processing, with no datacompression used in conversion.

Playback control (PBC): Refers to thesignal recorded on video CDs or SVCDs forcontrolling playback. By using menu screensrecorded on a Video CD or SVCD thatsupports PBC, you can enjoy interactiveplayback and searching.

Progressive Scan: It displays all thehorizontal lines of a picture at one time, as asingle frame. This system can convert theinterlaced video from DVD into progressiveformat when the DVD Player is connected to aProgressive Scan TV. It dramatically increasesthe vertical resolution and provides the bestpicture.

Region code: A system allowing discs to beplayed only in the region designated. This unitwill only play discs that have compatible regioncodes. You can find the region code of yourunit by looking on the product label. Somediscs are compatible with more than oneregion (or ALL regions).

Glossary

En

gli

s h

35

Glossary

S-Video: Produces a clear picture by sendingseparate signals for the luminance and thecolour. You can use S-Video only if your TV hasan S-Video In jack.

Sampling Frequency: Frequency ofsampling data when analog data is converted todigital data Sampling frequency numericallyrepresents how many time the originalanalogue signal is sampled per second.

Surround: A system for creating realisticthree-dimensional sound fields full of realismby arranging multiple speakers around thelistener.

Title: The longest section of a movie or musicfeature on DVD. Each title is assigned a titlenumber, enabling you to locate the title youwant.

VIDEO OUT jack: Yellow jack on the backof the DVD system that sends the DVDpicture video to a TV.

MWFRONTRIGHT

FRONTLEFT

REARRIGHT

REARLEFT


MAGNAVOXS M A R T . V E R Y S M A R T .

MRD120

Pr/Cr

Pb/Cb

Y

First connect ...

... then play(see next page)

Front Speaker(left)

Rear Speaker(right)

Rear Speaker(left)

CentreSpeaker

MW loop antenna

FM antenna

Compositevideo cable

12nc : 8239 300 31331

Front Speaker(right)

PassiveSubwoofer

D

Helpful HintsTo obtain a better picture quality effect, you canchoose to connect an extra video connection ifyour TV has the same input connector: A or B.

If your TV hasthis video input jack(s)

A

B

Use this video cable (not supplied)

S-VIDEOIN

COMPONENT VIDEO IN

ANTENNA IN

Do not switch the P-SCAN to ‘ON’ position, unless you haveconnected the DVD system to a Progressive Scan TV using theComponent (Pr/Cr Pb/Pb Y) video jacks.

When listening to TV programmes, press TV/AV button on the remoteto set the DVD system to TV/AV mode in order for the sound to be heard.

For connecting to a VCR, see page 11 in the owner’s manual for moredetails.

P-SCAN

OFF ON

If your TV has onlya single Antenna Injack, you will need anaccessory RF

modulator. The RF modulatorconverts the video from theDVD system so it can playthrough the TV’s Antennaconnector. Refer to yourowner’s manual for properconnection (refer to page 9 inthe owner’s manual).

A B C

D

EF

HJG

G BH C A J

Adan

Adan

Adan

Adan

Adan

Adan

Adan

Adan

Adan

Adan

SOURCE


PREV NEXT

VOLUME

PHONES


AV IN

VOL

1

4

5

4 CHANNEL 3

23

4 ALL

Detailed playback features and additional functions are described in theaccompanying owner’s manual.

Playing a disc

1 Press DISC on the remote control.You can also press the SOURCE button on the front paneluntil “DISC” appears on the display panel.

2 Turn on the TV and select the correct VideoIn mode.You should see the blue DVD background screen on the TV(if no disc in the DVD system).

3 Press OPEN/CLOSE 0 on the front of theDVD system and load a disc, then pressOPEN/CLOSE 0 again to close the disc tray.Make sure the disc label is facing up. For double-sided discs,load the side you want to play face up.

4 Press ÉÅ to start playback.If a disc menu appears, use 3 4 1 2 buttons on the remoteto make the necessary selection, then press OK to confirm.Or, use the numeric keypad on the remote to select features.Follow the instructions given in the disc menu.

5 To stop playback, press STOPÇ.

Make sure your DVD system and

TV are connected and turned on!

SOURCE


PREV NEXT

VOLUME

PHONES


1 Press to remove the menu.

2

TV SHAPETV SYSTEMVIDEO OUTSCR SAVER

DIGITAL OUT

CNTR DELAYNIGHT MODE

REAR DELAYTEST TONE

AUDIOSUBTITLEDISC MENU

PARENTALPASSWORD

DEFAULTSMENU LANG

Using the DVD setup menu

Check the AV (Audio/Video)mode on your TV.

* Usually this channel is between thelowest and highest channels and maybe called FRONT, A/V IN, or VIDEO.

* Or, you may go to channel 1 on yourTV, then press the Channel downbutton repeatedly until you see theVideo In channel.

* Or, your TV remote control mayhave a button or switch that choosesdifferent video modes.

* Do not use channel 3 or 4 on the TVunless you are using an RF modulator.

* See your TV manual for more details.

No picture?

Adan

En primer lugar conecte ...

A Altavoz delantero (derecho)

B Altavoz delantero (izquierdo)

C Altavoz central

D Cable de vídeo compuesto

E Antena de cuadro MW

F Antena de alambre FM

G Subwoofer

H Altavoz trasero (izquierdo)

J Altavoz trasero (derecho)

...y después reproduzca

Reproducción de un discoAsegúrese de que su sistema de DVD y su televisor estén conectados y

encendidos!

1 Pulse DISC en el control remoto.También puede pulse SOURCE en el panel delantero hasta que en el panel de visualizaciónaparezca “DISC”.

2 Encienda el televisor y seleccione el modo de entrada de video correcto.Debería ver la pantalla de fondo azul de DVD (si no hay disco en el sistema DVD).

3 Pulse OPEN/CLOSE 0 en la parte delantera del sistema DVD y coloqueun disco, y vuelva pulsar el botón OPEN/CLOSE 0 correspondiente paracerrar la bandeja de discos.Asegúrese de que la etiqueta del disco esté cara arriba. En el caso de discos de dos caras,coloque el disco con la cara que quiere reproducir hacia arriba.

4 Pulse ÉÅ para iniciar la reproducción.Si aparece un menú de disco, utilice los botones 3 4 1 2 del control remoto para realizar laselección necesaria y después pulse OK para confirmarla. O utilice el teclado numérico delcontrol remoto para seleccionar funciones. Siga las instrucciones dadas en el menú del disco.

5 Para detener la reproducción, pulse STOP Ç.

Utilización del menú de configuración de DVD

En el manual del propietario adjunto se describen funciones de reproduccióndetalladas y funciones adicionales.

¿No imagen!!

Compruebe el modo (AV/Audio/Video) ensu televisor.

* Normalmente, estos canales se encuentran entre loscanales más altos y más bajos y pueden llamarseFRONT, A/V IN o VIDEO.

* O, puede ir al canal 1 de su televisor y pulsar el botónde reducción de número de canal hasta que vea elcanal de entrada de vídeo.

* O, el control remoto de su televisor puede tener unbotón o interruptor que seleccione diferentes modosde video.

* No utilice el canal 3 o 4 de su televisor a menos quese utilice un modulador de RF.

* Para más detalles, consulte el manual de su televisor.

Guía de utilización rápida

Pulse para acceder al submenú.

Pulse para resaltar la selección.

Pulse para confirmarla.

Pulse regresar al nivel anterior.

Pulse para retirar el menú.

Si su televisor solamentetiene un conector deentrada de antena, necesitaráun modulador de RF accesorio.

El modulador de RF convierte el vídeodel sistema DVD de forma que puedareproducirse a través del conector deantena del televisor. Para una conexióncorrecta, consulte su manual delpropietario (Consulte la página 41).

No ponga P-SCAN a la posición ‘ON’, a menos que haya conectado elsistema DVD a un televisor de exploración progresiva utilizando los conectoresde vídeo Componente (Pr/Cr Pb/Cb Y).

Cuando escuche programas de televisión, pulse el botón TV/AV en el controlremoto para ajustar el sistema DVD al modo de TV/AV para que se oiga el sonido.

Si desea conectar su VCR, véase la página 43 del manual del usuario para más detalles.

P-SCANON OFF

Consejo útilesPuede hacer una conexión de vídeo extra conuna de las opciones siguientes si su televisortiene el mismo conector de entrada : A o B.

A

B S-VIDEOIN

COMPONENT VIDEO IN

Utilice este/estoscable(s) de video(no suministrado)

Si su televisor tiene este/estos conector(es) deentrada de video

ANTENNA IN

Primeiro, conecte ...

A Caixa acústica frontal (direita)

B Caixa acústica frontal (esquerda)

C Caixa acústica central

D Cabo de vídeo composto

E Antena de quadro MW

F Antena de fio FM

G Subwoofer passivo

H Caixa acústica traseira (esquerda)

J Caixa acústica traseira (direita)

...depois divirta-se!

Reprodução de um disco

Certifique-se de que o sistema de DVD e TV estejam conectados e ligados!

1 Pressione DISC (DISCO) no controle remoto.Também é possível pressionar o botão SOURCE (FONTE) do painel frontal até aparecer “DISC”no painel do visor.

2 Ligue a TV e selecione o modo Video In correto.Deverá aparecer na TV a tela de fundo azul do DVD (se não houver nenhum disco no sistema deDVD).

3 Pressione OPEN/CLOSE 0 (ABRIR/FECHAR) na parte frontal dosistema de DVD e coloque um disco. Depois pressione OPEN/CLOSE 0novamente para fechar a bandeja do disco.Certifique-se de que a etiqueta do disco esteja voltada para cima. Nos casos de discos de duplaface, coloque o lado que deseja reproduzir voltado para cima.

4 Pressione ÉÅ para iniciar a reprodução.Se aparecer um menu do disco, use os botões 3 4 1 2 do controle remoto para fazer a seleçãonecessária. Depois pressione OK para confirmar. Também é possível usar o teclado numérico docontrole remoto para selecionar recursos. Siga as instruções fornecidas no menu do disco.

5 Para parar a reprodução, pressione STOP Ç.

Reprodução de um disco

Os detalhes sobre os recursos de reprodução e as funções adicionais são descritos no manual doproprietário que acompanha o produto.

Se sua TV tiver somenteuma tomada Antenna In,será necessário um moduladorde RF acessório. O modulador

de RF converte o vídeo do sistema deDVD, para que possa ser reproduzidopor meio do conector Antenna da TV.Consulte o manual do proprietáriopara obter informações sobre o modoadequado de conexão (ver a página 73do manual do proprietário).

Não mude a chave P-SCAN para a posição ‘ON’, a não ser que tenhaconectado o sistema de DVD a uma TV com recurso Progressive Scan usando astomadas de Video Component (Pr/Cr Pb/Pb Y).

Ao ouvir programas na TV, pressione o botão TV/AV do controle remoto paraajustar o sistema de DVD ao modo TV/AV, para que o som seja ouvido.

Para conexão a um VCR, ver página 75 do manual do proprietário para mais detalhes.

P-SCANON OFF

ANTENNA IN

A imagem não aparece?

Verifique o modo AV (Áudio/Vídeo) na TV.

* Normalmente, este canal está entre os canais maisbaixo e mais alto e pode chamar-se FRONT, A/V IN ouVIDEO. Consulte o manual da TV para obter maisdetalhes.

* Você também pode ir ao canal 1 da TV e pressionar obotão Channel para baixo repetidamente até aparecero canal Video In.

* O controle remoto da TV também pode ter um botãoou comutador para a escolha dos diferentes modos devídeo.

* Você também pode ajustar a TV para o canal 3 ou 4 seestiver usando o modulador de RF.

Guía rápido Para Uso

Pressione para acessar o submenu.

Pressione para realçar a seleção.

Pressione para confirmar.

Pressione para retornar ao menu anterior.

Pressione para remover o menu.

Printed In China

Dicas úteisPara obter um efeito melhor de qualidade deimagem, você pode optar por uma conexãoextra de vídeo, caso sua TV possua o mesmoconector de entrada: A ou B.

A

B S-VIDEOIN

COMPONENT VIDEO IN

Use este cabo devídeo (nãofornecido)

Se sua TV tiver estastomadas de entrada de

vídeo

Documents

User guide - dl.owneriq.netdl.owneriq.net/3/36cb5eff-695e-46e0-be51-0762044e07b0.pdf · LEA CUIDADOSAMENTE ESTE INSTRUCTIVO ANTES DE USAR SU APARATO. AVISO IMPORTANTE Philips Mexicana,S.A.de