User Guides-N&G&W

8/8/2019 User Guides-N&G&W

1/36

1

Bluetooth Proximity Marketing

--User Guides(N/G/W series)


2/36

2

CONTENTS How it works

Specification & Feature

Knowing the hardware operation

Running the system

Step1. Ready the software

Step2. Upload advertisement

Step3. Create advertiser information

Step4. Create a campaign

Step5. Update campaign to the device

A. Update via USB

B. Update via Internet

C. Update via LAN

D. Read Sending Report

Step6. Set and Update Group Devices(For group devices user)


3/36

3

How it worksDevice detection: System scans for Bluetooth-enabled device located in a range up to 100meters (330

feet) depending on the interior conditions and a target mobile phone type.

Permission request: for every device, system sends request for permission of sending files (it lookslike Do you want to connect with Blueone)

c. Content download. Once user has accepted request, system sends files. The number ofactual simultaneous connections depends on the type of device you have purchased. (Thanksto multithread software architecture and multiple Bluetooth radios installed, sending files toone customer will not stop detection of new mobile phones around)


4/36

4

Specifications& Feature

Point to multi-points, maximum 14-28 simultaneous connections 100KB data rate (depending on Bluetooth of mobile phone) Support all formats file transferring, eg.image,animation, text,audio,video,game.

Support Udisk updating Support Ethernet, WIFI, GPRS, CDMA,WCDMA.TDS-CDMA.3G updating (request wireless

accessories) 10M/100M adaptive network Support Bluetooth security certification Support Bluetooth data encryption Embed LINUX OS 400M high performance processor Built-in 128MB/1G flash memory 12V/1A 100-250Voltage DC/AC power input Dimension: 16.5*12.3*3.9cm (excluding antenna)

Bluetooth Bluetooth 2.0 + EDR (enhanced data rate) Bluetooth Class 1, up to 100meters

2.402G~2.480GHz Frequency Bluetooth stack LC, LM, L2CAP, SDP, RFCOMM, OBEX Bluetooth profiles Obex Push profile File Transport protocol USB standard: FAT32


5/36

5

Knowing how the hardware operates

1,Secure the antenna on the device, power it on with switching power supply, thepower indicator lights up in red, later the system indicator twinkles in green.

2,Device is now ready for use.


6/36

6

Running the system

Step1.Ready the software

Insert the software disk into PC, go to my computer to find the software icon as is shownbelow, create a new folder on the desktop to put the software in (statistics will be generated

during system running )

Paste software into

Creat folder on desktop


7/36

7

Double-click the icon to open software as is shown below, Eight main menus are available in theinterface as: advertisement /advertisers/campaign/ Udisk/LAN/Net/Group

Double -Click to Start Software


8/36


9/36

9

Step3: Create Advertiser InformationGo to Advertiser page, click Add, a dialog box pops out, fill in the advertisers information.

Click OK to save. Follow the same way to add more advertisers information.

Click delete to delete, edit to revise advertiser infos


10/36

10

Step4: Create A Campaign

Move to Campaign Interface, there are three Sections.

Step I. Define the device name/mail address/sending policy

Step II. Set Campaign name/workmode for the device

Step III. Select and savecampaign content to the device.


11/36

11

Step I. Device List Setting

Click Advanced to configure each column indicated below

Sending policy configuring

Device/server mail configuring

Campaigns updated via net as attached

order are sent from Server mail to devicemail and statistics are accessed fromdevice to server. User can selectcompany email or others such as Gmail(Company email is stronglyrecommended). If Gmail, please enablePOP to all email by setting POP on

www.gmail.com

The Lower right two sections are for G/W series ONLY.

Click New to set a device name
http://www.gmail.com/http://www.gmail.com/


12/36

12

Detailed mail settingClick Gmail selectoption if use Gmail asdevice and server mails

ClickGPRS 3G start ifG14/G28;Insert with nameand passwords provided bytelecom operator

Click to enable WIFI Updatingwith correct infomation

Email: [email protected]: 123456POP3: mail.blueone.cnSMTP: mail.blueone.cn

Email: [email protected]: 123456POP3: mail.blueone.cnSMTP: mail.blueone.cn

P.S.:The above two email addresses are used for Bluetooth marketing devices testingonly. All other emails will be deleted if they are not recognized by the system.

Move to Gmail Setting

2 Email accounts offered for test:
mailto:[email protected]:[email protected]:[email protected]:[email protected]:[email protected]


13/36

13

1

For Gmail users, besides settings in the software, configuring following settings in Gmail setting is needed

Delete Gmails copy

5

4

3

2


14/36


15/36

15

Finish Device List Setting

Click OK on the Advanced Setting, then click "OK" on the Device Name Setting.The device is configured as shown in the Device List Box(Upper Left)


16/36

16

Short-cut to define a new device/batch devices

Click with right key of mouse--choose copy devicepastename

it with a different nameclick OK tofinish. Follow the same pattern tobatch configure device names

Next step: set campaign List


17/36

17

Step. Campaign List Setting Click New to open campaign name dialogbox, fill in the campaign name/pairingcode and select work mode.Five modesavailable:sequence/random/schedule/period everyday/period every week. Chose one thenclick OK

Note: please set only one campaign in a device.

Click okto save

This name will be displayed onreceiving mobile phone once itreceives message.

Pairing code is defaulted as0000.

(a paring code is only usedwhen the handset is set at ahigh security level,likeBlackberry,and it will ask forinsert a pairing code to getpermission)

Refer to page 18 About

Working Modes


18/36

18

Schedule: campaign will be sent within set time.

Sequence: all files of the campaign will be sent out together

Random: campaigns will be sent in Random to different cell phones (one cell phone canreceive only one campaign).

Period Per Day:campaigns sent according to your set period in a specific day;

Period Per Week:campaigns sent according to your set period in a specific week

Note: Random mode is especially useful in lottery sending!

About Work Modes


19/36

19

More about Campaign List Setting

Click "New" to set Campaign name. click "ok" to finish campaign List making

"New" to Add New Campaign

"Edit" to Revise Campaign

"Delete" to Remove Campaign

Always Remember click "OK" to save campaign


20/36

20

Step Campaign Context Setting

1. Click the pull-down menufor more files & advertisers

2. Click "Add" for a new file;

Click "Delete" to Remove afile;

Click "Edit" to Revise a file

3. Always click " Save" to finish

Campaigh Context making


21/36

21

Step 5. Update the finished campaign to device

1. Go to "Udisk" interface,highlight the wanted campaign name in the campaign listcolumn. Go to order list area to select update campaign, update date/time. Then click

save to Udisk to save it to Udisk.AND unplug Udisk.

A. Update by USB

sending report percents in chart


22/36

22

2.Connect the Udisk to the terminal device, USB indicator turns blue during the autoaccessing of the data, and several seconds later, turns off as the accessing is completed.(At the same time the device gets its own name, which means users can use internet toupdate the system from then on).

3.Unplug the Udisk, system indicator starts to twinkle in green light (indicating the auto

searching for Bluetooth terminal)

Upgrade ProgramIn order to make Bluetooth marketing device more compatible, program will beupgraded if needed. Select the wanted device from campaign list, and clickUpgrade program, then dialog pop-up. Click browse to select file bmain forprogram column. Click browse to select libbluex.so file for DLL column. Click

Save to Udisk to save to Removable disk. Plug USB flash disk into USB port ofBluetooth marketing device, Blue indicator turns on, and system will upgradeprogram automatically. Once it is finished, the blue indicator turns off, pleaseunplug the USB.

Clear statistics-to clear the sending recording of the selected device Clear blacklist-to erase the list of rejected sending Upgrade program-to upgrade through internetUpdate campaign-to replace the previous advertisement (this operation will cover the contentsof the previous advertisement)

Note: system will collect the sending statistics and save them once a hour, if a power breakdownhappens, the sending report for the present hour will be lost(make sure power supplied)

Technical Terms in this interface:


23/36

23

B. Update Campaign via Internet

Note: To utilise this function, system must haveAdvanced Setting done and an initialconfiguration Uploaded via USB Flash Driver.

Familiarize yourself with sectons in Internet interface

Campaigns are listed for your choosing

Campaign sending report displayed here

sending report percents in chart

Campaign content shown here

Device Configuration

Command List

Sending & Receiving Status


24/36

24

1. Updating Campaign

(1). Highlight the wanted campaign in the campaign list column. (at the same time, system willautomatically check the terminal on line status)NOTE: please make sure that the selected campaign has a device name, and the correspondingcontent is shown in the right Campaign content column.

Go to Command List to select the needed Commands (please refer to P12 for function of each order).

Click send to device to send out the order by email.

Note: before sending out the order, please check the device configure information the emailshould follow the below form:


25/36

25

Once sending finished system will show as follows:

Note: system will warn if the email accounts are inproper, please check email accounts setting:


26/36

26

C. Update Campaign via LAN

Familiarize yourself with LAN interface

Campaign List

Commanding Lists

Contents of Left Campaign

Sending Report Lists

sending report percents in Chart


27/36

27

1.Connect the device with properly set and workable LAN

2.Device Searching

Click "Search" in LAN interface and system will automatically findterminals in the LAN


28/36

28

3. Update Campaign

Select the wanted campaign item, then select change for other campaign to chose the campaignfor update and update campaign update date time in operation list. Then click operate.


29/36

29

D. Read Sending Reports

a.Via USB1. Highlight a campaign, select access statistics and access blacklist, and save to Udisk tosave to the Udisk.

2. Unplug the Udisk and connect it to device, device will automatically execute the orders.3. After minutes, connect the Udisk to the device and data will be updated automatically.4. Unplug the Udisk and Plug it into PC and Find getstat folder then statistics.text to read.

b. View on software Net InterfaceSending statistics is also available through software. Move to Net Interface. Click the

campaign file and click Receive from Device2 minutes after clicking "send to device", .

Single click the campaign file again, report will be listed on the left below blank.

c. Export Sending ReportHighlight the campaign, then click rightmouse button to export the sendingreport to Excel file and save to read.


30/36

30

d. Via LANSelect the wanted campaign item, then select access statistics access black list inoperation list. Then click operate. Single click the campaign file again, thecorresponding sending report will be listed in the right side sending report column

Sending Report

Sending Report percents in Chart


31/36

31

Step6.Group Setting and Updating( For Group Devices)

Move to "Group" interface. Four Sections as bellow:

Step I. Define Group Name/device name/workmode Step III. Select Device Name for Group

Device List from All Device List

Commanding Lists Step III. Select and savecampaign file to the device.


32/36

32

I. Gruop List Setting

Click New to set a Group Name/Campaign Name/work mode

Click "OK" to save

Highligh a file, click Editto Revise;click Delete to Remove


33/36

33

. Group Device List Selection

Highlight a device from "All DeviceList" and click , then thedevice will appear in the " GroupDevice List"

Highlight a device from" Group Device

List" and click , and then thedevice will be removed from the"Group Device List"


34/36

34

Guoup Campaign Context Setting

1. Click the pull-down menu formore files & advertisers

2. Click "Add" for a new file;

Click "Delete" to Remove a file;

IV. Group Updating

Highlight a Group file andclick "Update to Device" then

the campaign will be updatedautomaticlly.


35/36

36

V. Receiving and reading sending report

1.Receiving Sending ReportHighlight a group file and click " Receive from device",then the sending statistics will be received


36/36

37

2. Reading sending reportDouble-click the device in the " Group Device List", then it will pop out asending report form as the right one

Documents

User Guides-N&G&W