Embed Size (px)
Citation preview
GB
User manual●Washing machine
HW80-B14876●HW100-B14876
●HW120-B14876
Thank You
2
Legend●
Warning – Important Safety information
General information and tips
Envi●
ronmental information
Disposal ●Help protect the environment and human health. Put the●
packaging in applicable containers to recycle it. Help to recycle waste of electrical and electronic ap-pliances. Do not dispose appliances marked with this symbol with the household waste. Return the product to your local recycling facility or contact your municipal office.
Thank you for purchasing this product.
Please read these instructions carefully before using this appliance. The instructions contain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance.
Keep this manual in a convenient place so you can always refer to it for the safe and proper use of the appliance.
If you sell the appliance, give it away, or leave it behind when you move house, make sure you also pass this manual so that the new owner can become familiar with the appliance and safety warnings.
WARNING!
Disconnect the appliance from the mains supply. Cut off the mains cable and dispose of it. Remove
●
the door catch to prevent children and pets to get closed in the appliance.
Content
3
1-Safety information 4
2-Product description●
7
3-Control panel 8
4-Programmes 12●
135-Daily use
6-Eco-friendly washing 18
7-Care and cleaning 19
8-Troublesho●
oting 22
9-Installation 26
10-Technical data●
30
1-Safety information
4
-ing safety hints!
WARNING!●
Make sure there is no transport damage. Make sure all t
●
ransport bolts are removed.Remove all packaging and keep it out of children’s reach.Handle the appliance always with at least two persons because it is heavy.
Daily use
This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities
●
or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Keep away children under 3 years of age from the appliance unless they are constantly sup
●
ervised. Children shall not play with the appliance.Do not let children or pets come close to the appliance when the door is open. Store washing agents out of reach of children. Pull up zips, fix loose threads and take care of small item to
Do not touch or use the appliance when barefoot or with wet or damp hands or feet.Do not cover or encase the appliance during operation or after-wards to allow a
●
ny moisture or dampness to evaporate.Do not place heavy objects or sources of heat or damp on top of the appliance.Do not use or store detergent or dry cleaning agent in close vicinity to the appliance.Do not use any sprays in close vicinity to the appliance.Do not wash any garments treated with solvents in the appliance without having dried them previously in the air.
prevent laundry from being entangled. If necessary, use an appro- priate bag or net.
1-Safety information
5
WARNING!
Daily use
Maintenance / cleaning
●
Installation
Do not remove or insert the plug in the presence of flammable gas. Do not hot wash foam rubber or sponge-like materials. Do not wash any laundry which is polluted with flour.Do not open detergent drawer during any washing cycle.Do not press the door during the washing process,it gets hot.Do not open the door if the water level is visibly over the porthole.Do not force the door to open.The door is fitted with a self-lockdevice and will open shortly after the washing procedure is ended.Switch off the appliance after each washing programme and be-fore undertaking any routine maintenance and disconnect the ap-pliance from the electrical supply to save electricity and for safety. Hold the plug,not the cable,when unplugging the appliance.
Make sure children are supervised if they carry out cleaning andmaintenance.Disconnect the appliance from the electrical supply before under-taking any routine maintenance.Keep the lower part of the porthole clean and door and detergentdrawer open if appliance is not in use, to prevent odours.Do not use water spray or steam to clean the appliance.Replace a damaged supply cord only by the manufacturer,its ser-vice agent or similarly qualified persons in order to avoid a hazard.Do not try to repair the appliance by yourself.In case of repair is needed please contact our customer service.
The appliance should be placed●
in a well-ventilated place.Ensurea location where allows to ope
●
n the door fully.Never install the appliance outdoors in a damp place or in an areawhich may be prone to water leaks, such as under or near a sinkunit.In the event of a water leak, cut off power supply and let themachine dry naturally.
1-Safety information
6
This appliance is intended for was●
hing machine-washable laun-dry only.Anytime the instru
●
ctions given on the label of each garmentlabel should be followed.It is designed exclusively for domestic useinside the house.It is not intended for commercial or industrial use.
WARNING!
Installation
Install or use the appliance only in where the temperatuer isabove 5 °C.
Do not place the appliance directly on a carpet or close to awall or furniture.
Do not install the appliance in direct sunlight or near heat sources(e.g. sloves,heaters).Make sure that the electrical information on the rating plateagrees with the power supply.If it does not,contact an electrician.Do not use multi-plug adapters and extension cables.Make sure only the delivered electric cable and hose set areused.Make sure the electric cable and plug are not damaged.Ifdamaged,have it replaced by an electrician.Use a separate earthed socket for the power supply which iseasily accessible after installation.The appliance must be earthed.Make sure the hose joints and connections are firm andwithout leakage.
Intended use
Changes or modifications to the dev●
ice are not allowed.Unintendeduse may cause hazards and loss of all warranty and liability claims.
HW120-B14876●
De lay I- tim e Temp . Speed Rins e Water leve l Star t/Pause
R
Mix
Wool
Shirts
Duvet
Sanitize
Underwear
Kids Wear
Casual Wears
Rinse+Spin
Spin
Hygienic
Quick 15 Bedding
rpm
1400Capacit y
12kgABT99%
Intense
Self Clean
Delicate
2-Product description
7
2.1 Picture of appliance
Front (Fig. 2-1): Rear side (Fig. 2-2):
2.2 Accessories●Check the accessories and li
●
terature in accordance with this list (Fig.2-3):
Inlet hoseassembly
6 Blanking plugs and 2 Bolts
Drain hose bracket
User manualWarranty-card
Note:
2-3
21 3 4 5 6 7
1 Detergent / Softener drawer
2 Worktop
3 Display
4 Programme selector
5 Panel
6
7 Sevice flap
8 Adjustable feet
Door handle
(Picture is schematic, please refer to actual product)
R5R6
Bottom plate
R7R8 R9 R10
1 Iron bar (I1-I2)2 Transportation bolts (T1 -T4)
3 Rearward reinforcement
4 Power cord5 Water inlet valve6 Drain hose7 Rearward reinforcement
(The 8kg model has only one rearward reinforcement below)
HW120-B14876●
Delay I-time Temp. Speed Rinse Water level Start/Pause
R
Mix
Wool
Shirts
Duvet
Sanitize
Underwear
Kids Wear
Casual Wears
Rinse+Spin
Spin
Hygienic
Quick 15 Bedding
rpm
1400Capacity
12kgABT99%
Intense
Self Clean
Delicate
3-Control panel
8
3.1 Dete●
rgent drawer
Open the drawer, three compartments can be seen ●(Fig. 3-2).
1 Compartment : Disinfector for programme
2 Compartment : Liquid detergent for programme
3 Compartment : Softener, Conditioning agent etc.
4●
Compartment : Powder detergent for programme
The recommendation on the type of detergents is suitable for the various washing temperatures, please refer to the manual of detergent.
Note : Acoustic signal
In following cases an acoustic signal sounds:
when pressing a button
when turning the programme selectorat the end of programme
in case of failures
The acoustic signal can be deselected if necessary; see DAILY USE.
1 Detergent / Softener drawer
2 Display
3 Programme selector
4
5
“Start/Pause” button
6
Water level
7
Rinse
8
Speed
9
Temp.
10
I-time
11 Child lock (Delay+I-time)
12 Delay
3.2 Displ●
ay
If the appliance is on Display will light up the actual-
washing time, spin speed, temperature, etc will appear (Fig. 3-3).
Function buttons:
“On/Off” button
status on different sections. The information includingDelay I-time Temp. Speed Rinse Water level Start/Pause
3-Control panel
9
Display symbols:
Programme status indication Programme cycle indication
Control panel is locked
Door is locked (in ope
●
ration)
Displ●
ay for washing time, end time delay as well as error codes and servi●
ce information.
Remaining operation time
Remaining delay time
Rinse c●
ycleNo water supply Door is open Wash cycle Spin/drainage cycle
3.5 “Start/Pause” but●
tonPress this or interrupt the currently displayed programme. During programme run the colon in the displayed washing time is blinking. During a pause also the time display is blinking.
3.3 Programme selector
By turning the knob (Fig. 3-4) one of 16 programmes can be selected, related LED will light up, and its corresponding settings will be displayed.
3-4
Press this button (Fig. 3-5) to switch on,
if no panel element or programme is activated after
a while machine will shut down automatically.
3-6
3-5
Press it again for about 2 seconds to switch off,
3.4 “On/Off” button
Start/Pause
HW120-B14876
Mix
Wool
Shirts
Duvet
Sanitize
Underwear
Kids Wear
Casual Wears
Rinse+Spin
Spin
Hygienic
Quick 15 Bedding
Intense
Self Clean
Delicate
3-Control panel
10
Note: Liquid detergent
If using liquid detergent, it is not recommended to activate the end time delay.
3.6.1 Function “Dela●
y”
P●
ress this button (Fig. 3-8) to start the programme with
●
a delay. End time delay could be increased in a st-
means●
end of programme cycle will be in 6 hours and 30 minutes. Press “Start/Pause” button to activate the time delay.
The time delay must be longer than the programme run time. Otherwise the programme will start immediately.
For deactivating the time delay; rotate programme selec●
tor.
3.6 Function buttons
The function buttons (Fig. 3-7) enable additional op- tions in the selected programme before programme start. The related indicators are displayed.
all options are disabled.
If a button has multiple options, the desired option can be selected by pressing the button sequentially.
To delete the setting or cancel the setting process,press the function button until the desired LED lights
Not all functions are available for all programmes (see“Programmes”).
Note: Factory settings
settings. If there is no special requirement, default settings are recommended.
By switching off the appliance or a programme running
or -in case of only one option- the LED switches off
ep of 30 minutes from 0.5-24h. For example, display off
To get best results in each programme we have well defined specific default
3.6.2 Function “I-time”
Press the“I-time” button (Fig. 3-9) to select or cancel“I-time” function,washing time can be increased or reduced by pressing the button sequentially.Not all functions are available for all programmes (see “Programmes”).
Delay I-time Temp. Speed Rinse Water level
Delay
I-time
-
Temp.
3-14●
3-Control panel
11
3.6.3 Function “Child lock”
This option blocks all panel elements against activation. After programme start press button “ Delay” and “I-time” (Fig. 3-10) simultaneously
for 3 seconds; child lock symbol is displayed. For unlocking, press again the two buttons.
3.6.5 Function “Speed”
Press this button (Fig. 3-12) to change or deselect the spin of the programme. If no value is illuminated the laundry will not spin.
3.6.4 Function “Temp.”
Press this button (Fig. 3-11) to change the washing temperature of the programme. If no value is illuminated water will not heated.
3-10
3-11
3-12
3.6.6 Function “Rinse” 3-13
3.6.7 Function “Water level”
Press this button (Fig. 3-13) to change or deselectrinse time. By pressing the button several times one to three cycles can be selected.
Press this button (Fig. 3-14) to change or deselectwater level. By pressing the button sev
●
eral times L1 to L3 cycles can be selected.
Delay I-time
Speed
Rinse
Water level
4-Programmes
12
*: Water is not heated up. Choose 90 wash temperature only for special hygienic requirements. Reduce detergent amount because programme duration is short.
Max. load●
in kg
Tempera-ture
Preset Spin
speed
in rpm
Function
in °CProgramme Recommended
clothing type
max●
Preset
8/10/12
8/10/12
8/10/12
8/10/12
8/10/12
4/5/6
4/5/6
4/5/6
4/5/6
60 30 º º 1000 ºMix
40 * º
Mixed-laundry of cotton and synthetic
1000 º
º /Machine-washable
800
Shirts 40 40 º / º Suitable for shirts 1000
Duvet 40 40 º /Machine-washableduvet
800
60 ºDisinfection for theclothes suitable
1000
Underwear
90 30 º Cotton 1000
Hygienic
/ 90 90 / 600 /
30 30 º /
Lightly soiled cotton
600 º
Sanitize
60 30 º / Suitable for bedding 1000
Self Clean
60 40 º / Underwear 1000
90 40 º / 1000
Delicate
40 30 º Casual wear 1000
Intense
90 90 º / Cotton 1000
/ / / / 1000 /
Rinse+Spin / / / / / all fabrics 1000 / /
1)
2)2)
2)
Detergent compartment for:
1 Disinfector
Liquid detergent
Softener, Conditioning agent etc.
Powder detergent
2
3
4 Yes º Optional, /No
0.8/1/1.2
0.8/1/1.2
1.6/2/2.4
1.6/2/2.4
5.6/7/8.4
1.6/2/2.4
40 *
*
Quick 15
Bedding
Casual Wears
Spin
2)
2)
and synthetic
woolens fabric
all fabrics
/
/ º
º
º
º
º
º
/
/
º
º º
º º
º º
º º
º º/
º º
º ºº º
º º
º º2) 2)
Delicate laundry andsilk
º1)
º
º
º
º
Do not use detergent instead of use a special machine cleaner.
º
º
º
º
º
º
º/
º
º
ºº
º
º
º
//
/
/
/
º
Child laundry
HW80-B14876/HW100-B14876/HW120-B14876
Kids Wear
Co
5-Daily use
13
5.3 P●
reparing laundry
Sort out clothes according to fabric (cotton, syn-thetics, wool or silk) and how dirty they are (Fig. 5-3). Pay attention to the care labelling of wash-ing labels.
●S●
eparate white clothes from coloured ones.
they fade or run.
Empty pockets (keys, coins, etc.) and remove harder decorative objects (e.g. brooches).
a wash bag to care for this delicate laundry (hand or dry cleaning would be better).
Close zippers, velco fastener and hooks, make sure the buttons are sewn on tightly.
hem, delicate underwear (Dessous) and small items such as socks, belts, bras, etc. in a wash bag.
Unfold large pieces of fabrics such as bed sheets, bedspreads etc.
pick out jeans and printed, decorated or colorintensive textiles; possibly wash separately.
5-3
5.1 Power supply
Connect the washing machine to a power supply (220V /50Hz; Fig. 5-1). Please refer also to section “Installation”.
5.2 Water connection
Before connecting check the cleanliness and clar-ity of the water inlet.
Turn on the tap (Fig.5-2).
5-1 5-2
Note: TightnessBefore use check for leakage in the joints between the tap and the inlet hose by turning on the tap.
CAUTION!●Non-textile, as well as small, loose or sharp-edged items may cause malfunctions
and damage of clothes and appliance.
Wash coloured textiles first by hand to check if
Place sensitive items like laundry without firm
Garments without hems,delicates and finely wowentextile such as fine curtains are to be put into
5-Dai y use
14
Care chart
Washing
Washable up to 95°C normal process
Washable up to 60°C normal process
Washable up to 60°Cmild process
normal processWashable up to 40°Cmild process
Washable up to 40°Cvery mild process
Washable up to 30°C normal process
Washable up to 30°Cmild process
Washable up to 30°Cvery mild process
Wash by hand max. 40°C
Do not wash
Bleaching
Any bleaching all●
owed Only oxygen/non -chlorine
Do not bleach
Drying
Tumble drying possiblenormal temperature
Tumble drying possiblelower temperature
Do not tumble dry
Line drying Flat drying
Ironing
ron at a maximum temperature up to 200 °C
ron at a medial tem-perature up to 150°C
Iron at a low temper-ature up to 110 °C; without steam (steam ironing may cause irre-versible damage)
Do not iron
Professional Textile Care
Dry cleaning in tetra-chloroethene
●
Dry cleaning in hy-drocarbons
Do not dry clean
Professional wet clean Do not professional wet clean
5.4 Loading the appliance
Put in the laundry pie●
ce by piece
of thumb for maximum load: Keep six inches between load and drum top.
Close the door ca●
refully. Make sure that no pieces of laundry are pinched.
Washable up to 40°C
Don’t overload.Note the different maximum load according to programmes!Rule
5-Daily use5.5 Selecting detergent
Use only machine wash approved detergent.
Always follow detergent manufacturer’s recommendations.Do not use dry cleaning agents such as trichloroethylene and similar products.
Choose the best detergent
Programme
Kind of detergent
Universal Colour Delicate Special Softener
L/P●
L/P oMix
L o
L L o
Shirts L/P L/P L o
Sanitize
L/P L/P o
Wool
L/P L/P L o
Under wear L o
Hygienic L/P L/P o
Intense L/P L/P o
Quick 15
L/P L/P L o
L o
oDelicate L/P L/P L
oCasual Wears L/P L/P L
Duvet
L = gel-/liquid detergent P = powder detergent O = optional
If using liquid deterge●
nt, it is not recommended to activate the time delay.
We recomment by using: Laundry powder: 20°C to 90°C* (best use:: 40-60°C)
Color detergent: 20°C to 60°C (best use: 30-60°C)
Wool/delicate detergent:20°C to 30°C (= best use:)
* Choose 90 °C wash ●
temperature only for special hygienic requirements.
15
Washing efficiency and performance is determined by the using detergent quality.
If needed use specific detergents,e.g. for synthetic and woolen fabric.
* It is better to use less or free suds detergent powder.
It is better to use less or free suds detergent powder.
5-Daily use
16
5.7 Switch on the appliance●
on the appliance (Fig. 5-5).
5.6 Adding detergent
Slide out the detergent drawer.
Put the required chemicals into corresponding compartments (Fig. 5-4), refer to section 3.1 De-tergent drawer.
Push back the drawer gently.
Note :Remove detergent residues before next wash cycle from the detergent drawer.
Do not overuse detergent or softener.
Please follow the instruction on the detergent package.
Concentrated liquid detergent should be diluted before adding.
Do not use liquid detergent if function “Delay” is selected.
Carefully choose the programme settings according to the care symbols on all laundry labels and according to the programme table.
5.8 Select a programme
To get the best washing results, select a programme
type.
Turn the programme knob (Fig. 5-6) to select the right programme. Related programme LED lights up and the default settings a
●
re displayed.
5.9 Add individual selections●Select required options
●
and settings (Fig. 5-7);refer to CONTROL PANEL.
●
Note: Self Clean
Press the “Power” button for two seconds to switch
Always fill the detergent just before the beginning of the wash cycle.
which fits the degree of soiling and sort of laundry
For regular maintenance we recommend to run programme Self Clean with noload in order to remove possible corruptive residues from time to time. Add aspecial machine cleaner.
HW120-B14876
Delay I-time Temp. Speed Rinse Water level Start/Pause
5-Daily use
17
5.12 After washing●At programme cycle end “End” is displayed.
Remove laundry as soon as possible to go easy on it and to prevent more wrinkling.
Unplug the power cord.
Open the door to p●
revent formation of moisture and odours. Let it open while not used.
5.13 Activate or deactivate the b●
uzzerThe acoustic signal can be deselec
●
ted if necessary:
Switch on the appliance.
Select the Spin pr●
ogramme.
Press the “I-time” button and “Speed” button at the same time for about three seconds. “ bEEP OFF ”
“ bEEP On ” will be displayed and the buzzer will be deactivated.
For activating the buzzer press these two buttons at the same time again.
will be displayed.
5.11 Interrupt - cancel wash programmeTo interrupt a running programme press gently “Start/Pause”. Programme run-time is flashing. Press it again to resume operation.
To cancel a running programme and all its individual settings:
Press “Start/Pause” button to interrupt the running programme.
Run programme Spin to drain the water.
Select a new programme and start it.
Note: Door lock
For safety reasons the door is locked partially during the washing cycle. It is only possible to open the door at the end of the programme or after the programme was cancelled correctly (see description above); “door is open”-symbol is displayed.
In case of high water level, high water temperature and during spinning it is not possible to open the door; the “door lock”-symbol is displayed.
Note: Standby mode / energy-saving mode
The switched on appliance will go into standby mode if it will not be activated within two minutes before starting the programme or at the end of programme. The display
5.10 Start wash programmePress “Start/Pause” button (Fig. 5-8) to start; appli-ance operates according to present settings. Changes are only possible by cancelling the programme.
Press “Power” button for about three seconds to switch the appliance off.
The appliance switches off automatically.
Turn off the water supply.
switches off.This saves energy.To interrupt the standby-mode push “Power” button.
Start/Pause
6-Eco-friendly washing
18
Environmental●
ly responsible useTo achieve best use of energy, water, detergent and time you should use the recommended maximum load size.
Do not overload (hand width clearance above laundry).
For slightly soiled laundry select the●
Quick Wash programme.
Apply exact dosages of each washing agent.
ciently cleaning below 60°C.
Raise default settings only due to heavy staining.
Select max. spinning speed if a domestic dryer is used.
Choose the lowest adequate washing temperature - modern detergents are effi-
7-Care and cleaning
19
7.1 Cleaning the detergent drawer
T●
ake always care there are no detergent residues. Clean the drawer regular ly (Fig. 7-1):
1. Pull out the drawer until it stops.
2. Press the release button and remove the drawer.
3.●
Flush the drawer with water until it is clean and insert the drawer back in the appliance.
7.2 Cleaning the machine
Unplug the machine during cleaning and mainte-nance.
Use a soft cloth with soap liquid to clean the machine case (Fig. 7-2) and rubber components.
Do not use organic chemicals or corrosive solvents.
Note: Self Clean●For regular maintenance we recommend to run programme Self Clean with no
load in order to remove possible corruptive residues from time to time. Add aspecial machine cleaner.Each 50 working cycles, the Self Clean LED will blink instandby statue, after running Self Clean programme, the LED will turn off.
To prevent blockage of water supply by solid substanc-
supply.
Unscrew the water inlet hose at the back (Fig. 7-3).
7.4 Cleaning the drumRemove accidentally washed metal parts such as pins, coins, etc. from the drum (Fig. 7-5) because they cause rust stains and damage.
Use a non-chloride cleaner for removing rust stains. Observe the warning hints of the cleaning agent manufacturer.
Do not use any hard objects or steel wool for clean-ing.
7.3 Water inlet valve and inlet valve filter
es like lime clean regularly the inlet valve filter.Unplug the power cord and turn off the water
Flush the filters with water and a brush(Fig.7-4).
Insert the filter and install the inlet hose.
Mix Delicate
HW1 20-B14876
Dela y I- time Temp. Spee d Rinse Water le vel Star t/Pause
R
Mix
Wool
Shirts
Duvet
Sanitize
Underwear
Kid s Wear
Casual Wears
Rinse+Spin
Spin
Hygienic
Quick 15 Bedding
rpm
1400C apacit y
12kgABT99%
Inten se
Self Clea n
Delicate
7-Care and cleaning
20
O●
pen service flap at the right corner of appliance front (Fig. 7-9).
Provide a flat container to catch leach water (Fig. 7-10). There could be a big amounts!
Pull the drain hose out and hold its end above the container (Fig. 7-10).
●T●
ake the sealing plug out of the drain hose (Fig. 7-10).
After complete drainage close drain hose and push it back into the machine (Fig. 7-11).
Unscrew and remove counter anticlockwise
Remove contaminants and dirts (Fig. 7-13).
7.5 Long periods of disuse
If the appliance is left idle for a long period:
1. Pull out the electrical plug (Fig. 7-6).2. 3. Open the door to prevent formation of moisture
and odours. Let door open while not used.
Before next usage check carefully power cord, water inlet and drain hose. Make sure everything is properly installed and without leackage.
WARNING!
hot! Before any action please ensure water has cooled down.
Note: Self Clean
After long periods of disuse we recommended to run programme Self Clean with no load and special machine cleaner to remove possibly corruptive residues.
filter for instance if the appliance:
doesn´t drain the water.
doesn´t spin.
cause unusual noise while running.
7
Turn off water supply (Fig. 7-7).
Clean the filter once a month and check the pump
Scadling Risk!Water in the pump filter can be very
Turn off and unplug the machine (Fig. 7-8).
the pump filter (Fig. 7-12).●
7-Care and cleaning
21
C●
AUTION!
can escape.
(Fig. 7-14).
Close service flap.
Carefully clean pump filter,e.g. using running water
Refix it thoroughly (Fig. 7-15).
Pump filter sealing has to be clean and unhurt.If the lid is not full tightened,water
The filter must b●
e in place, or it may lead to leakage.
8-Troubleshooting
22
of a p●
roblem please check all shown possibilities and follow below instructions before you contact an af
●
ter sales service. See “Customer service”.
WARNING!●Before maintenance, deactivate the appliance and disconnect the mains plug
from the mains socket.
A damaged power cable should only be replaced by the manufacturer, its
8.1 Information codes
Following codes are displayed only for information referring to the washing cycle. No measures must be performed.
service agent or similarly qualified persons in order to avoid a hazard.
Many occuring problems could be solved by yourself without specific expertise.In case
Electrical equipment should be serviced only by qualified electrical experts,because improper repairs can cause considerable consequential damages.
Th●
e remaining wash cycle time will be 1 hour and 25 minutes.
Automatic load detection is working; only in some programs.
Door is closed because of high water level, high water temperature or spinning cy
●
cle.
The buzzer is activated.
The buzzer is deactivated.
The washing cycle is finished.The appliance shuts off automatically.
8 Toubleshooting
23
8.2 Troubleshooting with display code
E1 Check d●
rain hose installation.
Heating er●
ror.
Water level sensor error. Contact the After sales service.
Abnormal communication error.
Clean pump filter.
8-Troubleshooting
24
8.3 Troubleshooting without display code
Washing machine ●fails to operate.
Programme is not yet started. D●
oor is not properly closed.
Power failure. Child lock is activated.
Check programme and start it.Close the door properly.Switch the machine on.Check power supply.Deactivate child lock.
Washing machine
with water.
No water.Inlet hose is kinked.
MPa.Door is not properly closed.Water supply failure.
Check water tap. Check inlet hose.
Check water pressure.
Close the door properly.Ensure the water supply.
Machine is draining cm.
water.
properly installed.
in water.
Drainage failure. Drain hose is blocked.
cm above oor level.
Unblock drain hose.
Strong vibration while spinning.
Not all transportation bolts have been removed.Appliance has no solid position.Machine load is not correct.
Remove all transportation bolts.Ensure solid ground and a evelled position.
Operation stops before completing wash cycle.
Water or electric failure.
Operation stops for a period of time.
●
Appliance displays error code.Problem due to load pattern.Programme performs soaking cycle
Consider display codes.Reduce or adjust load.
Excessive foam floats drum and/or detergent drawer.
●
Detergent is not a appropriate.
Excessive use of detergent.
Check detergent recommendations.Reduce amount of detergent.
Automatic adjust●ment of washing
time.
Washing programme duration willbe adjusted.
This is normal and doesn‘t affect functionality.
Spinning fails. Unbalance of laundry. Check machine load and laundry and run a spinning programme again.
will not be filledInlet hose filter is blocked. Unblock inlet hose filter.
Pump filter is blocked. Clean pump filter.
while being filled.
8-Troubleshooting
25
Unsatisfactory washing result. with selec
●
ted programme. D●
etergent quantitiy was not suf
in the drum.
Select another programme
Choose the detergent acc.to
Reduce loading.Loose the laundry.
Washing powderresidues are on the laundry.
remain as white spots on the laundry.
Perform extra rinse.
dry laundry.Choose an other detergent.
Laundry has grey patches. or ointments
Pretreat the laundry with a special cleaner.
8.4 In case of power outage
The current programme and its setting will be saved. When power supply is restored, previous operation will be resumed.
If a power failure cuts an operating wash programme, door opening is mechanically blocked. To get out any laundry water level should not be seen in the glassy porthole of the door. Not till then pull lever (A) beneath
servi●
ce flap (Fig. 8-1) until door is unlocked by a gentle click. Afterwards refix all parts
ficient.to manufacturer specifications.
If error codes are still displayed after these measures, switch off the appliance, disconnectthe power supply and contact the customer service.
26
9.1 Preparation
Take the applian●
ce out of the packaging.
9.3 Dismantle the t●
ransport protection
The transport protection on the rear side is designed for clamping anti-vibration components inside the appliance during transportation to prevent inner damage. All elements(I,R,S and
●
T,fig.9-4)must be removed be
●
fore use:
Note: Packaging disposal
Keep all packaging materials out of children´s reach and dispose them in an environmentally friendly manner.
9.2 Bottom plate installation
1. Prepare Bottom plate 1EA and bolts 2EA (Fig. 9-1).
2. Lay the washing machine down to its side, window upwards, bottom side towards operator
3. Insert the Bottom plate into the cabinet ,Then fixed with 2 screws to the cabinet on the window side(Fig. 9-3). Finally set the machine upright again.
9-1 9-2
9-4
T1
T4T3
T2
9-5Remove all 4 bolts (T1-T4) (Fig. 9-5).
When opening the package, you will find a bottom plate. It is used for preventing rats or foreign objects
into the washing machine after covering the bottom
of the cabinet .
2
1
(Fig. 9-2)
Remove all packaging material including protecting film on cabinet,polystyrenebase,keep them out of childrens reach. While opening the package, water dropsmay be seen on plastic bag and porthole. This normal phenonmenon resultsfrom water tests in the factory.
9-Installation
9-Installation
27
9.5 Adjusting the ●
feet
Install the appliance on solid ground. Adjust all feet (Fig.
●
9-9) to achieve a complete level position. This will minimize vibrations and thus noise during use. It will also reduce wear and tear. We recommend to use a●
spirit level for adjustment. Floor should be as stable at as possible.
9.4 Moving the appliance
If the machine is to be moved to a distant location, replace the transport protection beforinstallation to prevent damage. The assemply takes place in reserve order.
Note: Keep in safe place
Keep all parts of the transport protection in a safe place for later use. Whenever the
3. Pull out the 2 iron bars I1 and I2 (Fig. 9-7).
4. Fill the 6 left holes with blanking plugs
R1-R4
9-6
I1 I2
9-7
9-8
appliance is to be moved at first reinstall the protection parts.
R5-R10
2. Remove 10screws (R1-R10) from back reinforcement
(Fig. 9-6) and put aside and the 8kg model has only one rearward reinforcement below.
9-Installation
28
Foll●
owing connections are possible:
9.6.1 Drain hose ●
to sink
Hang the drain hose with the U-support over the edge of a sink with adequate size (Fig. 9-10).
ping.
9.6.2 Drain hose ●
to waste water connection
The internal diameter of the stand pipe with vent-hole must be minimum 40 mm.
Put the drain●
hose for approx. 80 mm in the wastewater pipe.
(Fig. 9-11).
9-10 9-11
CAUTION!●
Drain hose is not to be extended. If necessary contact after sales service.
9.6.3 Drain hose to sink connection
The junction must lie above the siphon
A spigot connection is usually closed by a padThat must be removed to prevent any disfunction (Fig. 9-12).
Secure the drain hose with a clamp.
9-12
9.6 Drain Water Connection
WARNING!
Use only the supplied hose set for the connection.
Never reuse old hose sets!
Only connect to cold water supply.
Before connection, check whether the water is clean and clear.
Protect the U-support sufficiently againsy slip-
Attach the U-support and secure it sufficiently
The drain hose should not be submerged in water and should be securely fixedand leak-free.If the drain hose is placed on the ground or if the pipe is at a hei-ght of less than 80cm, the washing machine will continuously drain while beingfilled(self siphoning).
9-Installation
29
9.8 Electrical ●
Connection
Before each connection check if:● p
●
ower supply, socket and fusing are appropriate to
the rating plate.
the power plug and socket are strictly according.●Put the plug into the socket(Fig. 9-18).
9-18
WARNING!
Take care these parts are never to be crushed,kinked,or twisted.
Note: Self Clean
Ensure always that all connections(power supply,drain and fresh water hose)are firm,dry and leack free!
If the supply cord is damaged,it must be replaced by the service agent (see warranty card) in order to avoid a hazard.
After each installation or long periods of disuse,before first use and for regularmaintenance run programme Self Clean with no load and special machinecleaner to remove possibly corruptive residues.
9.7 Fresh Water Connection
Connect the nut on the inlet hose to the connector on the water valve(Fig.9-13).
Use the hose-set supplied with the appliance.
Old hose-sets should not be reused.
water inlet joint on the faucet, Make sure the screws is in
water inlet joint
lock pole
SliderWater pipe
9-13
9-14
screw
9-15
9-16 9-17
a. Hold down the lower end of the lock pole,Then hold the inlet pipe, press on the slider, and remove the water inletjoint (Fig. 9-14).
c. Press the slider and insert the water pipe into the water inlet joint, hang the water inlet joint with a lock pole and re-lease the slider until a “snap” is heard(picture Fig.9-6 andFig.9-7).
(Fig. 9-15).
10-Technical data
30
Dimension (HxWxD in mm)●
850x595x600
Power supply 220V/50Hz ●
Current in A 10
Model HW120-B14876
Max power in W 1850
Water pressure in MPa
Net weight in kg 80
Technical data
850x595x460 850x595x530
220V/50Hz
10
HW80-B14876 HW100-B14876
1900 1900
220V/50Hz
10
72 77
0020506943LD
