Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
Phoenix Audio Technologies | 16 Goodyear #120, Irvine, CA 92618 | 818-937-4774
The CM-01 and CM-02 ceiling microphones utilize a special pressure sensitive, tensionless low-mass element enhanced with an integrated FET low noise amplifier. These characteristics result in ultra-smooth frequency response providing excellent feedback stability for voice reinforcement and teleconferencing applications. Ideal microphone for boardrooms, classrooms and training rooms.
The microphone will need to be connected to one of the “microphone input” ports of the Stingray MT700 using the +, -, and ground connectors.
Setting the Stingray
The Stingray’s mixer should be assigned to the mic input. The setting can be selected either via the device front panel or through the Stingray’s setup GUI. Follow instructions below.
Using the CTG CM-01 and CM-02 Ceiling Microphone with the Stingray MT700 DSP
Recommended Mic Sensitivity Ceiling: 32-38 dB
* Depending on room acoustics
Configuring the Stingray DSP using the Front Panel
1) Click the "Enter" to access the menu
2) Scroll down to the second menu item and click on “automatic mixer selection”.3) Select “mix microphone input”.4) Navigate to the previous menu and select "Microphone Input Setting" to adjust microphone
sensitivity. The Recommended setting is 32-38 db.
Configuring the Stingray DSP using the GUI1) Select the primary unit and then click on “Edit Primary Parameters”.
Phoenix Audio Technologies | 16 Goodyear #120, Irvine, CA 92618 | 818-937-4779
2) In the next screen select "MIC MIXER".
3) Click the Microphone icon to adjust microphone sensitivity. The Recommended setting is 32-38 db.
Phoenix Audio Technologies | 16 Goodyear #120, Irvine, CA 92618 | 818-937-4779
For setup assistance or any additional technical questions, contact Phoenix Audio Technical Support at(818) 937-4779 or email us at [email protected].