16
Using the Projector to Enhance Instruction Get Going with iProject - Out of the Box iProject Session 1

Using the Projector to Enhance Instruction Get Going with iProject - Out of the Box iProject Session 1

Embed Size (px)

Citation preview

Page 1: Using the Projector to Enhance Instruction Get Going with iProject - Out of the Box iProject Session 1

Using the Projector to Enhance Instruction

Get Going with iProject - Out of the Box

iProject

Session 1

Page 2: Using the Projector to Enhance Instruction Get Going with iProject - Out of the Box iProject Session 1

Focusing Questions

How can we set up the projectors in our classrooms?

What are the different parts of the projector?

Page 3: Using the Projector to Enhance Instruction Get Going with iProject - Out of the Box iProject Session 1

Instruction

Page 4: Using the Projector to Enhance Instruction Get Going with iProject - Out of the Box iProject Session 1

Framing The Session

Today we will learn how to set up our projectors so that we can use them for effective enhancement of our library instruction.

We will label the different parts of the projector and attach them to our mobile device.

Page 5: Using the Projector to Enhance Instruction Get Going with iProject - Out of the Box iProject Session 1

Teaching

Lets first begin by labeling all items contained inside the smaller box:> Power Cable> VGA Cable> S-Video Cable> USB Cable> Composite Cable> VGA to Component Cable> RCA to Audio Cable> Mini pin to Mini pin Cable

Page 6: Using the Projector to Enhance Instruction Get Going with iProject - Out of the Box iProject Session 1

Cables

Page 7: Using the Projector to Enhance Instruction Get Going with iProject - Out of the Box iProject Session 1

Additional items to be Labeled

Remote (place batteries inside)

Documentation

Page 8: Using the Projector to Enhance Instruction Get Going with iProject - Out of the Box iProject Session 1

Guided Practice

Steps for setting up the Projector to the Laptop> Connect VGA to Projector> Connect USB to projector (only if you want to use your remote> Connect power cable to projector> Connect VGA to Laptop> Connect USB to Laptop> Connect power plug to power source> Turn on projector> Turn on Laptop> Wait until you see DELL logo and press either button located to the left of

the Q bar or FN F8> Adjust height and zoom

Page 9: Using the Projector to Enhance Instruction Get Going with iProject - Out of the Box iProject Session 1

Connected to a Laptop

Page 10: Using the Projector to Enhance Instruction Get Going with iProject - Out of the Box iProject Session 1

Work Time

Page 11: Using the Projector to Enhance Instruction Get Going with iProject - Out of the Box iProject Session 1

Getting Started

You have just completed the steps to set up your projector with the instructor, now it is time to reconnect and follow the steps. The steps will be displayed for you through my projector.

Page 12: Using the Projector to Enhance Instruction Get Going with iProject - Out of the Box iProject Session 1

Work Time

Reconnect and display

Shut down and put away

Work in groups or independently

Page 13: Using the Projector to Enhance Instruction Get Going with iProject - Out of the Box iProject Session 1

Steps to Connect

> Connect VGA to Projector> Connect USB to projector (only if you want to use your remote> Connect power cable to projector> Connect VGA to Laptop> Connect USB to Laptop> Connect power plug to power source> Turn on projector> Turn on Laptop> Wait until you see DELL logo and press either button located to the left of

the Q bar or FN F8> Adjust height and zoom

Page 14: Using the Projector to Enhance Instruction Get Going with iProject - Out of the Box iProject Session 1

Share

Page 15: Using the Projector to Enhance Instruction Get Going with iProject - Out of the Box iProject Session 1

Today we learned how to set up our projectors. There were many steps that needed to be completed, some easy and some difficult. Lets share some difficult steps and share ideas to remember how to complete those steps.

Share

Page 16: Using the Projector to Enhance Instruction Get Going with iProject - Out of the Box iProject Session 1

For more information

Office of Instructional Technology

[email protected]

www.nyc.gov/schools