Embed Size (px)
DESCRIPTION
Using the Projector to Enhance Instruction Get Going with iProject - Out of the Box. iProject Session 1. Focusing Questions. How can we set up the projectors in our classrooms? What are the different parts of the projector?. Instruction. Framing The Session. - PowerPoint PPT Presentation
Citation preview
Using the Projector to Enhance Instruction
Get Going with iProject - Out of the Box
iProject
Session 1
Focusing Questions
How can we set up the projectors in our classrooms?
What are the different parts of the projector?
Instruction
Framing The Session
Today we will learn how to set up our projectors so that we can use them for effective enhancement of our library instruction.
We will label the different parts of the projector and attach them to our mobile device.
Teaching
Lets first begin by labeling all items contained inside the smaller box:> Power Cable> VGA Cable> S-Video Cable> USB Cable> Composite Cable> VGA to Component Cable> RCA to Audio Cable> Mini pin to Mini pin Cable
Cables
Additional items to be Labeled
Remote (place batteries inside)
Documentation
Guided Practice
Steps for setting up the Projector to the Laptop> Connect VGA to Projector> Connect USB to projector (only if you want to use your remote> Connect power cable to projector> Connect VGA to Laptop> Connect USB to Laptop> Connect power plug to power source> Turn on projector> Turn on Laptop> Wait until you see DELL logo and press either button located to the left of
the Q bar or FN F8> Adjust height and zoom
Connected to a Laptop
Work Time
Getting Started
You have just completed the steps to set up your projector with the instructor, now it is time to reconnect and follow the steps. The steps will be displayed for you through my projector.
Work Time
Reconnect and display
Shut down and put away
Work in groups or independently
Steps to Connect
> Connect VGA to Projector> Connect USB to projector (only if you want to use your remote> Connect power cable to projector> Connect VGA to Laptop> Connect USB to Laptop> Connect power plug to power source> Turn on projector> Turn on Laptop> Wait until you see DELL logo and press either button located to the left of
the Q bar or FN F8> Adjust height and zoom
Share
Today we learned how to set up our projectors. There were many steps that needed to be completed, some easy and some difficult. Lets share some difficult steps and share ideas to remember how to complete those steps.
Share
