33
Vantablack Coatings for use in Automotive Applications Created by: Gwenaël Moysan | Ansys Application Engineer Excerpt from Ansys September 2020 Webinar: https://www.ansys.com/resource-library/webinar/ansys-2020-r2- materials-and-measurements

Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

Vantablack Coatings for use in Automotive Applications

Created by: Gwenaël Moysan | Ansys Application Engineer

Excerpt from Ansys September 2020 Webinar:

https://www.ansys.com/resource-library/webinar/ansys-2020-r2-materials-and-measurements

Page 2: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

Headlamp Projector Module

Page 3: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

3

Headlamp Projector Module

Shield

Shield : 0deg Shield : 50deg Shield : 300deg Shield : 150deg Shield : 210deg

Page 4: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

4

Intensity Sensor with Regulation Template

• Measurement point, line or zones defined in the template

• Each measure is tested against a regulation value

Green = pass

Red = fail

Measurement zones difined by regulationMeasurement values .

Page 5: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

5

Regulation Fail

Tolerance rotation introduced in shieldRegulation not fulfilled in HV_2 (too much light in this point)Max allowed: 625 cdMeasured: 717 cd

Page 6: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

6

Identification of the surface reflecting to much light

Shield surface highlighted in orange is reflecting light on the HV point (of the regulation)

Page 7: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

7

Apply Vantablack on the problematic surface

In this example, we are too late in the production process to do geometrical changes

Vantablack material property applied on these faces

Vantablack material measured by Ansys:BRDF as simulation input

Page 8: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

8

Simulation result with Vantablack: Regulation pass

Page 9: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

Head-Up Display Housing

Page 10: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

10

4 Materials Tested for HUD Housing

• Black Matt 1‐ (~17% Reflection @ Incidence 70° & 600nm)

• Black Soft‐ (~4.2% Reflection @ Incidence 70° & 600nm)

• Vantablack VBx2‐ (~1.2% Reflection @ Incidence 70° & 600nm)

• Vantablack S-VIS‐ (~0.6% Reflection @ Incidence 70° & 600nm)

HUD Housing

Page 11: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

11

Head-Up Display Optical Design

HUD Optical Design helps generates mirrors and combiners to achieve the best virtual image quality

Page 12: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

12

Critical Sun Position Identified with Light Expert

Page 13: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

13

Black Matt 1 on HUD Housing

Page 14: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

14

Black Soft on HUD Housing

Page 15: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

15

Vantablack VBx2 on HUD Housing

Page 16: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

16

Vantablack S-VIS on HUD Housing

Page 17: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

17

Black Matt 1 on HUD Housing

Page 18: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

18

Black Soft on HUD Housing

Page 19: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

19

Vantablack VBx2 on HUD Housing

Page 20: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

20

Vantablack S-VIS on HUD Housing

Page 21: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

Windshield Camera Light Trap

Page 22: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

22

Windshield Camera Light Trap

Page 23: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

23

Sun in a Critical Position

~45°

Critical position of the sun identified in a preliminary study:

• (Reverse simulation with source at the camera position and intensity sensor on sky)

Page 24: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

24

4 Materials Tested for the Light Trap

• Black Matt 1‐ (~17% Reflection @ Incidence 70° & 600nm)

• Black Matt 2‐ (~ 6.3% Reflection @ Incidence 70° & 600nm)

• Vantablack VBx2‐ (~1.2% Reflection @ Incidence 70° & 600nm)

• Vantablack S-VIS‐ (~0.6% Reflection @ Incidence 70° & 600nm)

Page 25: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

26

Black Matt 1 on Windshield Camera Light Trap

Page 26: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

27

Black Matt 2 on Windshield Camera Light Trap

Page 27: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

28

Vantablack VBx2 on Windshield Camera Light Trap

Page 28: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

29

Vantablack S-VIS on Windshield Camera Light Trap

Page 29: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

30

Black Matt 1 on Windshield Camera Light Trap

Page 30: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

31

Black Matt 2 on Windshield Camera Light Trap

Page 31: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

32

Vantablack VBx2 on Windshield Camera Light Trap

Page 32: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

33

Vantablack S-VIS on Windshield Camera Light Trap

Page 33: Vantablack Coatings for use in Automotive Applications · production process to do geometrical changes Vantablack material property applied on these faces Vantablack material measured

Surrey NanoSystemsContact Details:

Michael Stellmacher:

[email protected]

Business Development Director

AnsysContact Details:

Gwenaël Moysan :

[email protected]

Ansys Applications Engineer