VEHICLE ELECTRONIC COURSES from LOCKMASTER Group

- 1 -

ABOUT COURSES We can provide you with specials course about Key Programming and Immobilizer Bypassing, Immobilizer Pin code reading, autodiagnostic, car electronic modules programming and adaptation, eeprom reading with disoldering and soldering, transponder generating and also special courses for our Commander Softwares for VAG, BMW, Renault, OPEL, TOYOTA, MERCEDES, FIAT/ALFA ROMEO/LANCIA, NISSAN and PEUGEOT/CITROEN, usage of our special programmers like OMEGA - ORANGE eeprom reader and R260 Motorola In circuit Programmer , TANGO Programmer and Hi Tag 2 Programmer and working with our special device for Keyless entry and start the car! Copy of electronic hotel cards and tags with fixed transponder! Courses are given after discussion with the customers about their interests in the different car models which are only covered by our devices, programmers and software and can be held at our locations or the customer’s headquarters if this will be preferred! The main aim of the courses is to give you an idea and then teach you how to do the Key Programming, Immobilizer Pin code reading, autodiagnostic, car electronic modules programming and adaptation, eeprom reading with disoldering and soldering, transponder generating with the help our special devices, programmers like OMEGA - ORANGE eeprom reader and R260 Motorola In circuit Programmer , TANGO Programmer and Hi Tag 2 Programmer and Commander Softwares for VAG, BMW, Renault, OPEL, TOYOTA, MERCEDES, FIAT/ALFA ROMEO/LANCIA, NISSAN and PEUGEOT/CITROEN! This following list itemizes various questions that we need to be answered before any course can be arranged:

• Have your students received any prior instructions of this subject before? If so what level they have been trained?

• How many students do you wish us to train? • If foreign will you be able to provide an interpreter (English language)? • Do you wish the course to be run at your location or you wish to come to us for instruction?

For the basics it is better to come to us as we have more possibilities in our completely installed educational center!

• What kind of course do you intend to carry out? • What kind of targets (mentioned above) do you intend to attack? • Do you wish to purchase any specialized equipment on conclusion of the course?

All of these questions need to be answered before we can arrange a course to meet the client’s requirements. They are also relevant to the overall cost of the course! COURSES Even so a good operator requires at least one year of good practice before he can become a good diagnostic engineer who he will be able to do correct Key Programming, Immobilizer Pin code reading, autodiagnostic, car electronic modules programming and adaptation, eeprom reading with disoldering and soldering, transponder generating with the help our special devices, programmers like OMEGA - ORANGE eeprom reader and R260 Motorola In circuit Programmer, TANGO Programmer and Hi Tag 2 Programmer and Commander Softwares for VAG, BMW, Renault, OPEL, TOYOTA, MERCEDES, FIAT/ALFA ROMEO/LANCIA, NISSAN and PEUGEOT/CITROEN! The effectiveness of a team depends on the individual skills of its members. Each man will develop specific skill that makes him an essential part of the team. Once the member is removed the effectiveness of the overall team will be reduced until a replacement will be found and trained.

VEHICLE ELECTRONIC COURSES from LOCKMASTER Group

- 2 -

TYPE OF COURSES For the first level of education we recommend the following courses:

� Immobilizer Key Programming and Immobilizer Bypassing.

� Immobilizer Pin Code Reading.

� Auto diagnostic and car electronic modules programming and adaptation.

� Eeprom reading with disoldering and soldering processors and chips and decrypting of the HEX Data with our special equipment.

� Transponder generating with our special TANGO Programmer and Hi Tag 2 Programmer.

� Introducing and showing how to work with our special Commander Softwares for VAG, BMW, Renault, OPEL, TOYOTA, MERCEDES, FIAT/ALFA ROMEO/LANCIA, NISSAN and PEUGEOT/CITROEN via the diagnostic connector OBD II of the car.

The courses listed here show a very general list of subjects covered. Items featured in the advanced courses can be taught on a basic course and vice versa but the general list of contents is more or less consistent.

Immobilizer Key Programming and Immobilizer Bypassing This course is available to students who have no prior training or knowledge of Immobilizer Key Programming and Immobilizer Bypassing. It is an intensive course and covers all the necessary subjects to enable a student to successfully complete and understand the basic entry operations. The purpose of this course is giving an insight into the immobilizer Key Programming and Immobilizer Bypassing and executing it to the different vehicles. Subjects covered on a basic course include:

• Introduction of the basic Key Programming and Immobilizer Bypassing.

• Introduction of the special Key Programming Devices and Software.

o How to operate with the devices and software.

o How to copy key from key with fixed transponders.

o How to program a new key and remote control with crypto/rolling code.

o How to make Immobilizer Bypass and then restore the Immobilizer function.

o How to precode a transponder to the VIN number of the car and make it ready for programming.

We work with:

• Software and Devices produced by EDILOCK Ltd, SILCA and Key Line for LOCKMASTER Group

VEHICLE ELECTRONIC COURSES from LOCKMASTER Group

- 3 -

Immobilizer Pin Code Reading This course is available to students who have no prior training or knowledge of Immobilizer Pin Code Reading. It is an intensive course and covers all the necessary subjects to enable a student to successfully complete and understand the basic entry operations. The purpose of this course is giving an insight into the immobilizer Pin Code Reading and executing it to the different vehicles. The Pin Code reading can be done in two ways via OBD II and from the Eeprom memory of the electronic unit of the car.

VEHICLE ELECTRONIC COURSES from LOCKMASTER Group

- 4 -

Subjects covered on a basic course include:

• Introduction of the Immobilizer Pin Code Reading methods.

• Introduction of the different ways of extracting and calculating the immobilizer pin code.

o Reading and extracting the immobilizer pin code of the car via the diagnostic socket OBD II.

o Calculating the pin code from Eeprom memory dump of the electronic unit.

We work with:

• Software and Devices produced by EDILOCK Ltd. for LOCKMASTER Group

VEHICLE ELECTRONIC COURSES from LOCKMASTER Group

- 5 -

Auto diagnostic and car electronic modules programming and adaptation

This course is available to students who have no prior training or knowledge of Auto diagnostic and car electronic modules programming and adaptation. It is an intensive course and covers all the necessary subjects to enable a student to successfully complete and understand the basic entry operations. The purpose of this course is giving an insight into the Auto diagnostic and car electronic modules programming and adaptation and executing it to the different vehicles. The Auto diagnostic and car electronic modules programming and adaptation can be done with different diagnostic software and also with the original diagnostic software produced by the vehicle manufactures. In order to make this we have to teach you in some important techniques in the vehicle diagnostic and adaptation. Subjects covered on a basic course include:

• Introduction in the Auto diagnostic and car electronic modules programming and adaptation.

• Basic techniques and using of different software for module adaptation for the different vehicle brands.

• Requirements for the car electronic modules programming and adaptation. We work with:

• Software produced by EDILOCK Ltd. for LOCKMASTER Group and original Dealer software.

VEHICLE ELECTRONIC COURSES from LOCKMASTER Group

- 6 -

Eeprom reading with disoldering and soldering processors and chips and decrypting of the HEX Data with our special equipment This course is available to students who have no prior training or knowledge of Eeprom reading with disoldering and soldering processors and chips and decrypting of the HEX Data. It is an intensive course and covers all the necessary subjects to enable a student to successfully complete and understand the basic entry operations. The purpose of this course is giving an insight into the Eeprom reading with disoldering and soldering processors and chips and decrypting of the HEX Data. The Eeprom reading with disoldering and soldering processors and chips and decrypting of the HEX Data can be done with different serial eeprom and microprocessor. In order to make this we have to teach you in some important techniques in the Eeprom reading with disoldering and soldering processors and chips and decrypting of the HEX Data. The important thing is to be able to recognize the correct serial Eeprom chip or micro processor in order to read its memory correct and then decrypt the HEX Data into normal way in which you will be able to read the pin code, VIN number, Component Security and secret key cutting code of the car and other security information.

VEHICLE ELECTRONIC COURSES from LOCKMASTER Group

- 7 -

Subjects covered on a basic course include:

• Introduction of the Eeprom reading with disoldering and soldering processors and chips and decrypting of the HEX Data.

• Introduction of the special programmers needed fro the reading of the HEX Data from the serial eeprom and microprocessors.

• Showing how to solder and disolder serial eeprom and microprocessors.

• Decrypting of the HEX Data and extracting the security information from it. We work with:

• Programmers and software produced by EDILOCK Ltd. for LOCKMASTER Group.

VEHICLE ELECTRONIC COURSES from LOCKMASTER Group

- 8 -

Transponder generating with our special TANGO Programmer and Hi Tag 2 Programmer

This course is available to students who have no prior training or knowledge of Transponder generating. This is done with our special TANGO Programmer and Hi Tag 2 Programmer. It is an intensive course and covers all the necessary subjects to enable a student to successfully complete and understand the basic entry operations. The purpose of this course is giving an insight into Transponder generating. The Transponder generating is a very strict process and in order to go on with it, first you have to cover the course for Eeprom reading with disoldering and soldering processors and chips and decrypting of HEX Data as it is needed the Hex data to be loaded to our special TANGO Programmer and Hi Tag 2 Programmer. Tango Programmer and Hi Tag 2 Programmer are new generation of transponder programmers which are developed to cover, read, write and generate the latest transponders used in the latest vehicle immobilizer technologies

Subjects covered on a basic course include:

• Introduction into the TRANSPONDER GENERATING.

• Introduction into the work of the TANGO Programmer and Hi Tag 2 Programmer.

o How to load the HEX Data from the serial eeprom or microprocessor

o How to read/write transponders with the TANGO and Hi Tag 2 programmers

• Generating transponder data in order to start the vehicle We work with:

• Programmers and software produced by EDILOCK Ltd. for LOCKMASTER Group.

VEHICLE ELECTRONIC COURSES from LOCKMASTER Group

- 9 -

Introducing and showing how to work with our special Commander

Softwares for VAG, BMW, Renault, OPEL, TOYOTA, MERCEDES, FIAT/ALFA ROMEO/LANCIA, NISSAN and PEUGEOT/CITROEN via

the diagnostic connector OBD II of the car This course is available to students who have no prior training or knowledge of our COMMANDER Software for the different car brands. It is an intensive course and covers all the necessary subjects to enable a student to successfully complete and understand the basic entry operations. The purpose of this course is giving an insight into the work with our special Commander Softwares for VAG, BMW, Renault, OPEL, TOYOTA, MERCEDES, FIAT/ALFA ROMEO/LANCIA, NISSAN and PEUGEOT/CITROEN via the diagnostic connector OBD II of the car. With this special course we are going to show you how you can do diagnostic, key programming, eeprom reading, adaptation and electronic module programming, precoding of transponders by Component Security for VAG Group Cars and etc. and this is done via the diagnostic socket of the car.

Subjects covered on a basic course include:

• Introducing the Commanders Software for the different vehicle models.

• Showing how to read security data from the vehicles via OBD II.

•

VEHICLE ELECTRONIC COURSES from LOCKMASTER Group

- 10 -

• Introducing the common work of the Commander Software with the TANGO and Hi Tag

2 programmers.

• Showing how to prepare dealer keys and programming them to the vehicles.

• Showing how to Bypass the immobilizer and then restore the immobilizer function We work with:

• Software produced by EDILOCK Ltd. for LOCKMASTER Group.