Embed Size (px)
Citation preview
Control & Monitoring
TrinoVibration Monitoring System
Gearboxes
Alternators
Turbochargers
Pumps
Fans
For rotating machinery
TrinoALERT TrinoREMOTE
TrinoDETECT
TrinoSENSOR
2 3
Trino BENEFITS Continuous and permanent
condition monitoring
Simple on-board system initiating two-stage alarms for multiple failure conditions
Automatically adapts to varying machinery speed
Automatic transmission of alarm and performance data via cloud transfer
Low maintenance
Optional analysis & reporting service
Assists with critical asset management and CBM program integration
Industry 4.0 ready
Maximises availability of assets
Optimises maintenance intervals
Helps to reduce overall costs
TrinoVibration monitoring systemDesigned to continuously monitor the
vibration signatures of rotating machinery,
the vibration monitoring system Trino targets
applications where vibration analysis experts
are not generally on hand to determine
the condition of the machinery from early
indications of wear.
Trino presents two-stage alarm information in
a simple and clear format to local operators.
The system features a simple and informative
local alarm screen (TrinoALERT) for the local
engineers or operators, providing an initial
diagnosis of a developing problem. This
enables appropriate preventative action to be
taken to avoid the often and very substantial
consequential costs of an unexpected in-
service machinery failure.
REGULATEURS EUROPA (RE) also offers
a remote analysis and support service
(TrinoREMOTE) to customers who do not
have the expertise to interpret the data trend
analysis issued by the system.
OVERVIEWTrino can be readily integrated into condition monitoring on a path to Industry 4.0.
Its flexibility and modular approach ensures it can support many types of rotating machinery in both marine and industrial environments.
Stakeholder
MaintenanceTeam
RE Analysis& Report
TRINO System
AlarmAlertAsset
DataCloud
4 5
TrinoALERTTrinoALERT is typically mounted in a machinery control room and provides a centralised presentation of pre and main alarms from one or more TrinoDETECT units. Each alarm entry clearly indicates the machine and sensor reference, date/time log and a short diagnosis as to the most likely cause of the fault.
TrinoALERT uses a traffic light display code to indicate the condition of the system.
If no alarms are initiated, TrinoALERT will show its default colouring of the alert bar at the top of the screen.
If a pre-alarm is initiated it will be listed in the table and the alert bar at the top of the screen will indicate flashing amber. Following acknowledgment, this changes to solid amber.
If a main alarm is initiated it will be listed in the table and the alert bar at the top of the screen will indicate flashing red. Following acknowledgment, this changes to solid red.
TrinoALERT also presents alarm information from multiple TrinoDETECT units on the same screen, centralising the display of alarm and diagnostic information.
TrinoALERT also manages transfer of vibration data to remote offices (via the cloud) if broadband connection is available. This data can then be analysed by REGULATEURS EUROPA‘s TrinoREMOTE service (for example).
TrinoALERT supports multiple displays for larger sites.
Clearindicationofalarmstatus
Isanexpertonsiteforinitialfaultdiagnostics
Marineandindustrialversionsavailable
TrinoALERT
No alarms
Pre-alarm active
Main alarm active
SYSTEM COMPONENTS TrinoREMOTERegular and automatic transmission of detailed alarm and performance data to remote offices via internet connection and the cloud is available for vibration analysts to assess the condition of the rotating machinery and to advise on the appropriate course of action.
TrinoREMOTE is a vibration analysis service offered by REGULATEURS EUROPA. Following receipt of alarm and performance data from the application, vibration engineers at REGULATEURS EUROPA ensures that any alarms are alerted to the customers‘ senior engineers (e.g. superintendents) to ensure they are also made aware of the failure alerts and diagnosis information even though they may be located away from site.
In addition the TrinoREMOTE service provides both monthly and yearly asset health reports including condition trends based on the data received.
Vibrationanalysisservice
Alarmanddiagnosissupport
Monthlyandyearlyhealthreports
ISO10816certifiedvibrationengineers
TrinoREMOTE
Extract from typical monthly health report
TrinoDETECTThe TrinoDETECT unit continuously collects and monitors vibration frequency data received from a number of machinery sensors (typically accelerometers). Using spectrum analysis and moving band pass filter techniques, the condition signature contained within the sensor data is assessed to diagnose common machinery faults.
Alarm frequencies and amplitude levels automatically track and adapt themselves to the operating speed of the machinery, helping to ensure that Trino reliably senses any deviation from normal. Tracking is particularly useful for the successful monitoring of variable speed assets.
Monitoring options
■ Vibration
■ Speed
■ Temperature
■ Pressure
Compactconstruction
Suitedtobothengineroomandmachinerycontrolroomenvironments
Plug&socketconnection
TrinoDETECT
TrinoDETECT Unit
Head office Subsidiaries Subsidiaries with production facilities Distributors and dealers
HEINZMANNGroup
Quality & Precision since 1897
The Group started in 1897 with
Heinzmann GmbH & Co. KG,
and now includes
HEINZMANN UK,
HEINZMANN China,
HEINZMANN Korea,
HEINZMANN India,
HEINZMANN Australia,
HEINZMANN AUTOMATION,
REGULATEURS EUROPA,
and CPK Automotive as
member companies.
The HEINZMANN Group
operates numerous global
subsidiaries, including eight
production sites and an
international distributor
network.
Our product portfolio
comprises engine
management system
solutions, as well as exhaust
gas aftertreatment solutions,
for industrial combustion
engines and turbines. It also
encompasses automation
systems, primarily for the
shipping industry
Worldwide representations: www.regulateurseuropa.com/representations
REGULATEURS EUROPA – Specialist for Governing, Control & MonitoringWith two production and development sites, REGULATEURS EUROPA has been part of the HEINZMANN Group since 2005. The Netherlands facility Regulateurs Europa B.V. producing a comprehensive range of governors and actuators, and the UK facility Regulateurs Europa Ltd. producing governors and actuators; marine, industrial and traction controls and vibration monitoring systems.
www.regulateurseuropa .com
RE UKRegulateurs Europa Ltd.Port Lane, Colchester, Essex CO1 2NX United KingdomPhone: +44 (0)1206 799 556 Fax: +44 (0)1206 792 685Email: [email protected]
RE NetherlandsRegulateurs Europa B.V.Ekkelkamp 3, 9301 ZZ Roden The NetherlandsPhone: +31 (0)50 5019888 Fax: +31 (0)50 5013618Email: [email protected]
Head OfficeHeinzmann GmbH & Co. KGAm Haselbach 1 D-79677 SchönauGermanyPhone: +49 7673 8208 [email protected]
RE_T
rino_
001_
17_1
0_e_
1_20
17
