VibTrans - Dual ChannelDigital Vibration Monitor and Transmitter

Forbes Marshall is a leader in the area of process efficiency and energy conservation for the process industry. We have sixty years of experience building steam engineering and control instrumentation solutions with focussed investments in manufacturing and research and development. We deliver quality solutions in 18 countries. Forbes Marshall is unique in having extensive expertise in both steam and control instrumentation. This dual expertise has allowed us to engineer industry specific systems that focus on energy efficiency, environment and process efficiency for diverse sectors.

Our teams are peopled by some of the finest engineers in the land. These highly trained professionals have developed innovative solutions and saved millions of rupees in process costs for our clients. Our business practices and processes have combined into a singular philosophy of being trusted partners who provide innovative solutions. It's a philosophy we are proud to live up to.

We have long standing partnerships with some of the best names in the control instrumentation industry such as Arca, Codel, Krohne and Shinkawa, to develop, design and supply innovative solutions for measurement and monitoring of process parameters. With a combination of specialist knowledge and the latest technology, we provide products and solutions to achieve optimum efficiency. Our products are a unique combination of hardware and software that make them reliable and accurate.

VibTrans, is the latest technology for maintaining safety in large industrial rotating machines. Until now, plant maintenance was performed according to the Time Based Maintenance system (TBM), that is, preventive maintenance. The schedule was set up, based on OEM manuals, or time-based on MTBF or analysing data based on past failures.

However, based on examinations after shutdown for replacements, we see that we can extend life if we monitor machines online in a cost effective way. VibTrans is a simple, cost effective solution to protect machines by giving on-line information which you will be able to connect to the PLC or DCS of a plant and take a shut down whenever required through proper planning.This will:1. Improve plant maintenance and profit.2. Enhance safety of machines / people.3. Increase the lifespan of the machine.4. Reduce inventory cost.5. Reduce manpower cost to get data at regular intervals.6. Reduce energy cost.

VibTrans can take data from any Accelerometer (100 mv /g), velocity sensor (4 mv/mm/sec) and give a digital display in the form of velocity or displacements. It also gives 4-20mA , buffer and relay outputs.

It’s a perfect solution for your industry to keep your machine running......

VibTrans is the Right Size …Right Price …Right Quality Product with all the features for your Vibration Monitoring need.

Two channel microprocessor based digital vibration monitor and transmitter… Panel mount or Field mount

IbTrans - Vibration Monitor/Transmitter

JB

Piezo-Velocity Sensor/Accelerometer

mountedon bearing housing

with the help of mounting pad

Layout for Panel mount Vibtrans

Example 1 : Horizontal pump coupled with motor

10 m SS Conduit cable with sensor

CONTROL ROOM

SignalCable

Wall Mounted Panel to House VibTrans

4-20mADC output per channel

Relay output per channel

Modbus / Isolated output - as optional

Example 2 : Blower and fans

Example 3 : Coal crusher

JB

FIELD

JB

Layout for Field mount Vibtrans

Example 1 : CT fan

Example 2 : HT motors

Piezo-Velocity Sensor/Accelerometer

mountedon bearing housing

with the help of mounting pad on gear

box and Motor

10 m SS Conduit cable with sensor Field Mouted VibTrans

Example 3 : Vertical pump

4-20mADC output per channel

Relay output per channel

Modbus / Isolated output - as optional

Technical specifications

Power supply0 110VAC1 230VAC

Isolated output 0 Required 1 Not required

Modbus output0 Required1 Not required

MountingP Panel mountF Field mount

Input typeA AccelerationV Velocity

FM VIB TransOrder

Velocity0 0.1-101 0.25-252 0.5-509 Customised

Displacement0 1-100 1 2.5-200 2 5-500 9 Customised

I Single channelII Dual channel

Measured parameter V Velocity D Displacement

0 mm/sec1 inch/sec0 microns1 mills

Ordering information

Parameters measured:

Input sensors options:

Electrical specifications:

Mounting andDimensional Details:

I Velocity• Values measured : Peak Or RMS value• Units : mm/sec or in/sec (*1Factory Set)• Range : Please refer ordering info. table below

II Displacement• Values measured : Peak to peak• Units : microns or mils (*1Factory Set)• Range : Please refer ordering info. table below

I Accelerometer : 100mv/g II Velocity sensor : 4 mv/mm/sec I Frequency ranges : Factory preset (±3dB)II Display

• Output display : 5 seven-segment displaysa. Right most 3 digits for numerical valueb. All 5 digits to indicate message strings

• Measured parameters : Velocity / Displacement (*1Factory Set)Please refer ordering info. table below

• Indicators : 1 Bi colour LED Pk/RMS/Pk-Pk,Ch1 - Safe/Alert/Danger, Ch2 - Safe/Alert/Danger1 Bi colour LED - Velocity/Displacement, in/sec/mils, mm/sec/micron (*1Factory Set)

III Key pad : Keypad with integrated LEDs • 4 tactile keys• LEDs for channel selected for display i.e.

Velocity for displacementUnits : mm/sec or in/sec, microns or mills

• channel statusIV Output : 4-20 mA – for each channel

• Through rear panel terminals : Buffered output for Ch1 and Ch2 on rear terminal blocks• Relay output : Relay contact - 2 No.s For Alert and Danger

Relay contact details - 1A, 240VAC / 220VDC• Sensor failure On Display Modbus/RTU with RS485• Communication port (optional) a. MODBUS over RS485

b. Modes: RTU and ASCII (*1Factory Set)V Monitor accuracy : ±2% of FSDVI Operating voltage : 230V/115V ±10% @ 50HzVII Operating conditions

• Temperature range : 0 to 70ºC upto 95% humidity (non condensing)I Panel mounted : Size: 144(H) x 72(W) x 180(D) mm

• Front Bezel : 144 (H) X 72 (W) mm• Cutout : 138 (H) X 68 (W) mm

II Field mounted:• Enclosure size : 330 (H) x 165 (W) x 95 (D)• Construction : Aluminium die-cast with IP65 Keypad• Protection : IP65• Cable entry : 7 nos PG9 suitable for 4 to 8 mm OD cable Compliance test : a. EMC - EN 61000

b. EMI - EN 61000c. Bump: IEC-60068-2-29 (Annexure-ll)d. Vibration: IEC-60068-2-6 (Annexure-l)e. Ingress protectionf. TUV India Approved.

www.forbesmarshall.com

Forbes Marshall Pvt. Ltd.A-34/35, MIDC, Industrial Estate, ‘H’ Block, Pimpri, Pune - 411 018. India.Tel.: 91(0)20 - 27442020Fax: 91(0)20 - 27442040 E-mail: mvyas@forbesmarshall.com

Domestic:Ahmedabad, Alibag, Bangalore, Bhopal / Indore, Chandigarh, Chennai, Coimbatore, Delhi, Hyderabad, Jamshedpur, Kolkata, Mumbai, Nagpur, Navi Mumbai, Surat, Trichy, Vadodara, Visakhapatanam

International Operations: exp@forbesmarshall.comBangladesh, Bolivia, Canada, Chile, Columbia, Egypt, Indonesia, Kenya, Malaysia, Nepal, Peru, Singapore, Sri Lanka, Thailand, U.A.E., USA, Venezuela

Doc#

CIG

/121

2/25

8/V1

.R1