Virio 05 Vertical Balancing Machine for rotors up to 500 g • Precise unbalance measurement also for small, light rotors • Balancing in one or two planes • No time-consuming calibration runs through permanent calibration • Compact machine design, small space requirement and simple assembly • PC measuring unit with extensive operator prompting and direct display of unbalance or correction weight Working principle Manually load rotor in the balancing unit, center the work- piece with an interface adapter and close the protective shroud Start the automatic measuring run. Accelerate, measure and display the unbalance on the measuring unit, automatically index to the correction position. The measured value display is retained after each measuring run. Open the protective shroud, unload and, if necessary, correct the unbalance. Check the result of correction (achievement of tolerance is displayed by the measuring unit) and unload the rotor from the balancing unit. Measuring units CAB 700 is a compact basic instrument for all standard balancing tasks: Simple, menu-driven operation, clear display and high accuracy allow perfect balancing of rotors by less experienced operators. Measuring unit CAB 920 as a high end solution - with regard to operation and versatility, as well as accuracy Range of application Measurement and correction of unbalance in rotors without their own shaft, in one or two planes. Typical examples of rotors are blank CDs, small blowers without self-propulsion, centrifuges, deflection pulleys, clutch components and rotating paint spray nozzles. A shorter spindle distance and protective shroud provide faster, safer and more accurate balancing. Design • Force-measuring, vertical balancing machine with permanent calibration and automatic operation • Designed for table-top placement, suitable for a seated operator • Balancing unit, measuring unit and control cabinet are mounted on a common base plate. • The dynamometer-mounted precision balancing spindle supports a removable adapter for centering the rotors and is driven by a flange-mounted electric motor. • The protective enclosure designed according to ISO 21940-23 is part of the standard equipment. • Measuring unit CAB 820 with coloured, graphics capable LCD-Display. Cache memory for 99 rotor data and extensive basic configuration for the different correction methods. Optional: CAB 920 with Windows operating system, TFT colour display with touchscreen function and vector view of the unbalance. Designed as network compatible Schenck RoTec GmbH Landwehrstrasse 55 D-64293 Darmstadt Telefon (0 61 51) 32 23 11 Telefax (0 61 51) 32 23 15 http://www.schenck-rotec.de E-Mail [email protected]

Virio 05 - Schenck worldwide · 2014. 12. 8. · Vertical Balancing Machine for rotors up to 500 g. •Precise unbalance measurement also for small, light rotors. •Balancing in

Download PDF Report

Upload
others
View
6
Download
0

Embed Size (px)

Citation preview

Page 1: Virio 05 - Schenck worldwide · 2014. 12. 8. · Vertical Balancing Machine for rotors up to 500 g. •Precise unbalance measurement also for small, light rotors. •Balancing in

Virio 05Vertical Balancing Machine for rotors up to 500 g

• Precise unbalance measurement alsofor small, light rotors

• Balancing in one or two planes

• No time-consuming calibration runsthrough permanent calibration

• Compact machine design, small spacerequirement and simple assembly

• PC measuring unit with extensiveoperator prompting and direct displayof unbalance or correction weight

Working principleManually load rotor in the balancing unit, center the work-piece with an interface adapter and close the protectiveshroud

Start the automatic measuring run. Accelerate, measure anddisplay the unbalance on the measuring unit, automaticallyindex to the correction position. The measured value displayis retained after each measuring run.

Open the protective shroud, unload and, if necessary, correctthe unbalance.

Check the result of correction (achievement of tolerance isdisplayed by the measuring unit) and unload the rotor fromthe balancing unit.Measuring unitsCAB 700 is a compact basic instrument for all standardbalancing tasks: Simple, menu-driven operation, clear display and highaccuracy allow perfect balancing of rotors by lessexperienced operators.

Measuring unit CAB 920 as a high end solution - with regardto operation and versatility, as well as accuracy

Range of application Measurement and correction of unbalance in rotors withouttheir own shaft, in one or two planes. Typical examples of

rotors are blank CDs, small blowers without self-propulsion,centrifuges, deflection pulleys, clutch components androtating paint spray nozzles. A shorter spindle distance andprotective shroud provide faster, safer and more accuratebalancing.Design

• Force-measuring, vertical balancing machine withpermanent calibration and automatic operation

• Designed for table-top placement, suitable for a seatedoperator

• Balancing unit, measuring unit and control cabinet aremounted on a common base plate.

• The dynamometer-mounted precision balancing spindlesupports a removable adapter for centering the rotors andis driven by a flange-mounted electric motor.

• The protective enclosure designed according to ISO21940-23 is part of the standard equipment.

• Measuring unit CAB 820 with coloured, graphics capableLCD-Display. Cache memory for 99 rotor data andextensive basic configuration for the different correctionmethods.Optional: CAB 920 with Windows operating system, TFTcolour display with touchscreen function and vector viewof the unbalance. Designed as network compatible

Schenck RoTec GmbHLandwehrstrasse 55D-64293 Darmstadt

Telefon (0 61 51) 32 23 11Telefax (0 61 51) 32 23 15

http://www.schenck-rotec.deE-Mail [email protected]