VIVLIA ANTALLAKTIKWN 5.6130-6930 serie Prem

Issue 05-2009 (EAME) ATTACHMENTS - FACTORY AND FIELD INSTALLED 6030 Series Premium Tractors-1

ATTACHMENTS - FACTORY AND FIELD INSTALLEDA short description and recommendation of some ofthe various factory and field installations is given.Please note that the information, codes bundlenumbers are given for reference only, the currentprice list must be the only official orderingdocument.

Where factory installation codes or field installationbundle numbers were not available, they will be madeavailable as soon as possible.

1 Drive System

1.1 CREEPER KITS

Models: 6230 - 6630 PremiumNote:This software related field installation kit

must be ordered with indication of tractorserial number!

Note:Depending on the options of the tractor, additional spare parts may be required.

Code Bundle Description

AL173288Creeper kit, PowrQuad Plus or AutoQuad Plus transmission,40 km/h (25 mph), 6 ranges

Bundle Description Remark QTY

AL160792 Creeper housingwith dowel pins 1

AL173654Field installation kitwith cab componentsfor creeper lever

1

AL172602 Suction line for 4 cyl. tractors 1AL168627 U-joint, drive shaft for 4 cyl. tractors 1

L168349 Shape hose(coolant inlet) for 4 cyl. tractors 1

L168350 Shape hose(coolant return) for 4 cyl. tractors 1

AL172604 Suction line for 6 cyl. tractors 1AL166275 U-joint, drive shaft for 6 cyl. tractors 1

L168357 Shape hose(coolant inlet) for 6 cyl. tractors 1

L168358 Shape hose(coolant return) for 6 cyl. tractors 1

6030 Series Premium Tractors-2 ATTACHMENTS - FACTORY AND FIELD INSTALLED Issue 05-2009 (EAME)






Note: Depending on the options of the tractor, additional spare parts may be required.

Models: 6830 PremiumNote: This software related field installation kit




AL173290Creeper kit, PowrQuad Plus transmission, 40 km/h (25 mph) ECO or AutoQuad Plus transmission,50 km/h (31 mph), 6 ranges


AL160792 Creeper housingwith dowel pins 1


1

AL172602 Suction line 1AL168627 U-joint, drive shaft 1

L168349 Shape hose(coolant inlet) 1

L168350 Shape hose(coolant return) 1


AL173291Creeper kit, PowrQuad Plus transmission, 40 km/h (25 mph),4 ranges



1

AL172602 Suction line 1AL168627 U-joint, drive shaft

AL155069 Oil line assembly for tractors with2-wheel drive 1

AL155071 Oil line assembly for tractors with4-wheel drive 1

L168349 Shape hose(coolant inlet) 1

L168350 Shape hose(coolant return) 1


AL173422

Creeper kit,PowrQuad Plus transmission, 40 km/h (25 mph) orAutoQuad Plus transmission,40 km/h (25 mph) or 50 km/h (31 mph)



1

RE201075 Transmission outputshaft with bushing 1

L64500 Loctite 574 1


Models: 6930 PremiumNote:This software related field installation kit



Models: 6230 - 6930 Premium

1.2 COVERSThese covers are recommended when driving underadverse working conditions like scrub and woodland.



AL173423

Creeper kit,PowrQuad Plus transmission, 40 km/h (25 mph) orAutoQuad Plus transmission,40 km/h (25 mph) or 50 km/h (31 mph)



1

RE201075 Transmission outputshaft with bushing 1

L64500 Loctite 574 1


AL173654 Field installation kit with cab components for creeper lever


AL163214 Covers for electro-magneticshift valves


2 HYDRAULICS

2.1 MECHANICALLY-ACTUATED SELECTIVE CONTROL VALVES -

M-SCV

The M-SCVs provide a full range of features whichgives the flexibility to operate all hydraulic equipmenton the farm. The M-SCVs are located at the rear of thetractor. The selective control valves may be used inany of the available positions.Three different M-SCV versions are available: 100 Series, 200 Series or 300 Series. These M-SCVscan only be used with PFC hydraulic system withaxial piston pump.The M-SCV field kit contains as well thecorresponding quick couplers. The below listedactuating parts have to be ordered separately accordingto the mounting position of the M-SCV and this partsinclude the new color-coded dust protection housings.

100 Series M-SCV

Models: 6230 - 6930 Premium, 7430 and 7530 Premium

Note: This selective control valve at position 3 or 4 may be operated by a separat control lever or by a multi-function lever.

Actuating partsFor M-SCV installation on Position III

For M-SCV installation on Position IV


7221 AL180369 M-SCV Series 100 withstandard quick couplers


AL176243Control parts andcolor-coded dust protectionhousing in brown

controls SCV at position III 1

AL176245

Multi-function lever with 2 functions and HI-LO shifting and color-coded dust protection housing inbrown and black

controls SCV at position III and IV

1


AL176244Control parts andcolor-coded dust protectionhousing in black

controls SCV at position IV 1

AL176245



1


200 Series M-SCV


Note:This selective control valve at position 3 or 4 may be operated by a separat control lever or by a multi-function lever.



350 Series M-SCVwith low leakage functionIn addition to the low leakage function the 350 SeriesSCVs offer the same hydraulic functions as the 300Series SCVs like e.g. three selectable hydraulicfunctions (no detent, continuous detent, „kickout“detent).Benefits of low leakage function:

• Provides better retaining of implements inintended position, if selective control valve is inneutral position.

• Reduce internal oil leakage to minimum.• Ensures that the tractor’s hydraulic supply works

almost free from leakage.


Note:This selective control valve at position 3 or 4 may be operated by a separat control lever or by a multi-function lever.




7230 AL180370 M-SCV Series 200 withDeLuxe quick couplers




AL176245



1




AL176245



1


AL181054 M-SCV Series 350 withDeLuxe quick couplers




AL176245



1




AL176245



1


Power Beyond CouplerThe couplers can be used only when paired as shownbelow.

Models: 6230 - 6930 Premium, 7430 and 7530 Premium, 7430 E and 7530 E Premium

Note: if needed please order in addition:



2.2 M-ICV AND E-ICV

Mechanical IndependentControl Valve (M-ICV)




AL176296 12.5 mm (1/2 in.) couplersfor tractors


AL176806 12.5 mm (1/2 in.) couplers for implements 1


AL176297 20 mm (3/4 in.) couplersfor tractors


AL176807 20 mm (3/4 in.) couplersfor implements 1

Code Bundle Description8810 AL179315 M-ICV field kit (2 functions)


AL174935 ICV lines 6230 - 6630 Premium 1

AL174937 ICV lines 6830 and 6930 Premium 1


AL175020 Joystick for M-ICV control(2 functions)

6230 - 6930 Premium 1


7430 and 7530 Premium 1

AL175022Joystick for M-ICV control with diverter switchesand HI-LO shifting(2 functions)

6230 - 6930 Premium 1






Electrical IndependentControl Valve (E-ICV)





Code Bundle DescriptionAL179316 M-ICV field kit (3 functions)






6230 - 6930 Premium 1



Code Bundle Description8802 AL174933 E-ICV field kit (2 functions)




AL174938 ICV lines7430 and 7530 Premium,7430 E and 7530 E Premium

1

AL175230 Electrical parts for tractors with M-SCV

This software related field installation kitmust be ordered with indication of tractor serial number!

1

AL175231 Electrical parts for tractors with E-SCV


1

AL174410 Joystick for E-ICV with CommandArm 1

AL174227 Joystick for E-ICV without CommandArm 1

Code Bundle Description8803 AL174934 E-ICV field kit (3 functions)




AL174938 ICV lines7430 and 7530 Premium,7430 E and 7530 E Premium

1

AL175230 Electrical parts for tractors with M-SCV


1

AL175231 Electrical parts for tractors with E-SCV


1

AL174410 Joystick for E-ICV with CommandArm 1

AL174227 Joystick for E-ICV without CommandArm 1



2.3 ELECTRICALLY-ACTUATED SELECTIVE CONTROL VALVE -

(E-SCV)For E-SCV installation on Position III a E-SCV onPosition I and II is required. For E-SCV installation onPosition IV a E-SCV on Position I, II and III isrequired.

350 Series E-SCVwith low leakage function


Note:This software related field installation kitmust be ordered with indication of tractorserial number!



2.4 MISCELLANEOUS

Additional hydraulic oil reservoir 14 litresMore and more applications require the use ofhydraulic components. Big trailers with telescopiccylinders, for example, easily require 30 litres or moreof hydraulic oil to dump the trailer’s platform.To increase the amount of hydraulic oil at yourdisposal for such applications, John Deere offers anadditional hydraulic oil reservoir for easy fieldinstallation on 6030 Series Premium tractors. Thesereservoir provide additional 14 litres of hydraulic oil toincrease the withdrawal capacity of your hydraulicsystem.


Models: 6830 and 6930 Premium, 7430 and 7530 Premium, 7430 E and 7530 E Premium


AL181056Kit of parts for E-SCV’s Series 350 at position III includes valvesand control parts


AL181055Kit of parts for E-SCV’s Series 350at position IV includes valvesand control parts


8897 AL172591 Additional hydraulic oil reservoir,14 litres


8897 AL172593 Additional hydraulic oil reservoir,14 litres


3 ENGINE

Bottom guard for fuel tanksRecommended in adverse conditions, like scrub,woodland or land reclamation.




Models: 6930 Premium


8875 AL156243 Base guard for fuel tank (160 l, 165 l, 185 l)

Code Bundle DescriptionAL118241 Base guard for fuel tank, 207 l




Always be prepared in winter time -with John Deere heating systems!Have you also struggled with this situation? It iswinter, it is cold and you need your tractor urgently!And then… starting problems! You can save yourself from this situation! Here is thesolution John Deere offers you: a genuine fuel pre-heater, cold start packages and a coolant pre-heater -for reliable starts during the cold season!

Fuel pre-heaterParticularly important in the cold season, fuel pre-heaters prevent fuel waxing and subsequent filterblockage by automatically actuating a heater elementin the filter at low temperatures.


Cold start packagesWith a cold start package your tractor is fully preparedfor cold weather conditions. All required mountingparts are included in the field installation kit.


Note: not for tractors with AutoPowr transmissionNote: if the tractor is not already equipped with a

coolant pre-heater please order in addition 1 x AL173954 coolant pre-heater, 230 V


Note: for tractors with AutoPowr transmissionNote: if the tractor is not already equipped with a

coolant pre-heater please order in addition 1 x AL173954 coolant pre-heater, 230 V

Coolant pre-heaterA cold start - defined as a start with an enginetemperature lower than 10°C - places stress on theengine. Due to the quick and unbalanced heating of theengine, parts wear out more rapidly. With the help of acoolant heater the engine block is warmed andtherefore provides an easier start and reduces wear.Furthermore, it is important that the engine reaches it’soptimum operating temperature as fast as possible.This reduces fuel consumption and reduces exhaustemissions. Result: lower operating costs and lessenvironmental pollution.

Code Bundle Description9025 AL158520 Fuel pre-heater


9020 AL173953Cold start package, 230 V(charge pump pre-heater and transmission pre-heater)


9020 AL173952 Cold start package, 230 V(charge pump pre-heater)



Engine Oil SeparatorThe engine oil separator re-extracts the oil particlesfrom the crankcase ventilation system and feeds itback into the engine oil sump.Benefits of the engine oil separator:

• Tractors can to be operated in sensitive areas suchas municipal operations, grassland etc.

• Prevention of oil dripping from the crankcaseventilation system.

• Engine oil consumption is reduced.• The oil separator is maintenance free.


Code Bundle Description9030 AL173954 Coolant pre-heater, 230 V

Code Bundle Description9170 AL173596 Engine Oil Separator


4 ELECTRICAL - ELECTRONICAL COMPONENTS

4.1 LIGHTS

Headlights H4, beltline-mountedThese adjustable head lamps are fitted left and right tothe beltline of the cab. The halogen-type H4 bulbsprovide excellent illumination to the front and arestrongly recommended if front mounted equipment isto be used, especially e.g. for highway use when aloader or front linkage mounted implements obscurethe beam of the normal head lamps.


Note:please order in addition 1 x AL179915 service kit for easy adjustment of the headlights if required


Note: please order in addition 1 x AL179915 service kit for easy adjustment of the headlights if required

Working Lights H3, beltline-mountedThese adjustable working lights are fitted left and rightto beltline of the cab and offer outstandingillumination to the front working area as well as formounted implements (could be installed upright orhanging).


Note: can also be installed on rear fender(see corresponding catalog page)


9070 AL174332 2 beltline-mounted headlights H4, for right hand traffic


9070 AL174344 2 beltline-mounted headlights H4, for left hand traffic


9071 AL1743412 Working Lights H3,beltline-mounted on cab frame(upright or hanging)


Xenon Working Lights, beltline-mounted


Front Corner Working Lights H3

Sideways integrated in the front grille next to the frontheadlights, may be switched off for road travel.Provide superior illumination of the front working areaas the corner work lights are directed downward andoutward to light up the area immediately inside andahead of the front wheels. This will help operatorsfollowing a plough furrow or drill marker furrow atnight - for better working conditions and increasedproductivity.




9072 AL175583 2 Xenon (HID) Working Lights,beltline-mounted on cab frame

Code Bundle DescriptionAL179095 Front Corner Working Lights H3

Bundle Description Remark QTYAL171958 Wiring harness, hood for 4 cyl. tractors only 1AL171893 Wiring harness, hood for 6 cyl. tractors only 1AL114046 Rocker switch 1


Additional Working Lights H3,cab-roof mounted


Xenon Working Lights,cab-roof mounted rear

Xenon headlights are firmly established within theautomobile industry, for giving the driver increasedvisibility. Xenon lights offer more advantages when used in thefield and John Deere gives the operator the opportunityto use them to their fullest potential.


Note: please order in addition 1 x L173600 double-faced adhesive tape if requiredCode Bundle Description

AL1743452 additional Working Lights H3,cab-roof mounted,FRONT and/or REAR


AL174229 2 Xenon (HID) Working Lights,cab-roof mounted rear


Working Light H3,fender-mounted rear



Note:can also be installed on beltline(see corresponding catalog page)

Beacon light



AL174329 1 Working Lightfender-mounted rear


AL1743412 Working Lightsfender-mounted rear(without licence plate)

Code Bundle Description9080 AL174214 Field installation kit for beacon light


4.2 MISCELLANEOUS

Multiple power outlet socketJohn Deere offers an auxiliary power strip kit to hookup electrical accessories to the tractor. It allows you toexpand your outlet needs while providing quick andconvenient hookup. The installation is flexible andeasy.Six additional electrical outlets give either permanentor ignition key controlled power for such items as:Computers, portable telephone charges, implementmonitor.


Powerstrip AdaptersPowerstrip adapters allow electrical connection formonitors and equipment not fitting the tractor’sstandard powerstrip or 3-pin outlets. Availableadapters include:

• 1 m (39.37 inch) cable for custom hard-wiring tocomponents

• Cigarette lighter-style outlet• North American-style flat 3-pin adapter• European-style round 3-pin adapter

Powerstrip adapters can also be used with the FieldOffice.






9146 AL174215 Field installation kit formultiple power outlet socket


RE67013Adapter standard connector(with 1 m / 39.37 inch cable for hard-wiring electrical components)

Code Bundle DescriptionRE67014 Adapter cigarette lighter outlet

Code Bundle DescriptionRE67015 Adapter 3-pin North American

Code Bundle DescriptionRE67016 Adapter 3-pin European


Sockets on the right rear cab post(C-Post)1) The 3-pin socket provides 12V with up to 25 amp.2) The 7-pin signal interface socket allows

implementsto communicate with the tractor withinthe ISO standard 11786 (please order in additionAL174997).

3) In case of electro-hydraulic pick-up hitchapplication the control switch can be locatedinto this socket as well.


Signal interface socket


Note:can be added to 3-terminal socket AL174348

Battery cut-off switch



Code Bundle Description9145 AL174348 3-terminal socket

Code Bundle Description9140 AL174997 Signal interface socket

Code Bundle Description9015 AL174696 Battery cut-off switch (4 cyl.)

Code Bundle Description9015 AL174697 Battery cut-off switch (6 cyl.)


Back-up alarm

Models: 6230 - 6930 Premium, 7430 Premium, 7430 E Premium


HMS PlusReduce with HMS Plus (Headland ManagementSystem) the number of manual tasks by sequencingmultiple tractor functions into one button and thereforeoperator fatigue, especially at headlands. It can helpgain you time in the field and ensure your headlandoperations are as precise at the end of the day as theywere when your started your work. For example, withone push of a switch, you can raise the hitch, adjust ahydraulically driven implement, shut off the PTO,disengage the MFWD and turn off the differentiallock. All this is done in the sequence you set and thesystem can repeat the manoeuvres according to aprogrammed distance. Touch the button again to returnto the previous setting - field work has never been thateasy or productive!


Note: This software related field installation kitmust be ordered with indication of tractorserial number!


AutoQuad PlusIt offers all the features of PowrQuad Plus with theadditional benefits of automatic shifting, infinitelyadjustable shift point, forward/reverse ratio setting anda programmable maximum gear. The advancedelectronic control unit (ECU) measures engine loadand rpm to shift up or down automatically among thefour powershiftable speeds within each range.


Note: This software related field installation kitmust be ordered with indication of tractorserial number!

Code Bundle DescriptionAL174225 Field installation kit for back-up alarm

Code Bundle Description9125 AL179613 Field installation kit for HMS Plus


AL177389 Linear hitch controlfor RH console

for tractors without CommandArm 1

RE223554 Rocker switch, HMS Plus for tractors with Command Arm 1

AL165494 Reed contact switchfor tractors without AutoPowr and without AutoTrac

1

Code Bundle DescriptionAL176040 Field installation kit for AutoQuad Plus


Converting the clutch function on the range-shift lever and activating the AutoQuad Plus functionThe field installation kit provide for the retro-fit of arange-shift lever with hand clutch for the AutoQuadPlus transmission.The existing range-shift lever (with or without handclutch) for PowrQuad Plus transmission is replaced bya range-shift lever (with hand clutch) for AutoQuadPlus transmission.A new shift-lever with bridge is included in therelevant field kit.

Models: 6230 - 6930 PremiumNote: from tractor serial number 559105Note:The tractor must be equipped with (PowrQuad

transmission) shifter wiring harness AL178633.Note:This software related field installation kit


Models: 6230 - 6930 PremiumNote: from tractor serial number 559105Note:The tractor must be equipped with (PowrQuad

transmission) shifter wiring harness AL178633.Note:This software related field installation kit



AL177667

ACTUAL condition:PowrQuad Plus with hand clutchINTENDED condition:AutoQuad Plus with hand clutch

This field installation kitinvolves changing the grip.


AL177668

ACTUAL condition:PowrQuad Plus without hand clutchINTENDED condition:AutoQuad Plus with hand clutch

This field installation kitinvolves changing the grip andthe shift lever.


5 MISCELLANEOUS

5.1 OPERATOR´S STATION

New Cab AccessoriesJohn Deere offers new accessories for the highest inoperator comfort and convenience! Personalize yourtractor cab and underline the high-quality appearanceof your tractor with the following new accessories.

Leather cusions with seat heatingThe dark brown leather seat cushion kit includes seatand backrest cushions as well as a backrest extension.The new leather trims provide the ultimate in operatorcomfort; especially the extra thick seat cushion and thebackrest extension help to reduce operator fatigue formore productivity even on long working days. Inaddition, the integrated seat heating provides optimumcomfort on cold winter days.As an additional eye-catcher the name John Deere isembroidered on the backrest extension. The robust andlongevity leather is easy to clean and abrasion-proof.


Note:Leather seat cushion is only compatible with MSG95 seats with adjustable seat cushion inclination and seat pan depth adjustment (see picture below).

Note:For seats without seat heating please order in addition AL151005 wiring harness and AL151010 switch.

Leather steering wheelThe new dark-brown leather steering wheel is elegantin appearance and provides a comfortable grip evenduring long working days! It is produced in the high-standard John Deere qualityand features the same adjustability as the standardsteering wheel.


Stainless steel heat protectionfor exhaust pipeFor an individual and elegant look John Deere offersthe new stainless steel heat protection for the exhaustpipe. It is produced in the high-standard John Deere qualitywhich ensures durability and a long service life.


AL174350Dark brown leather cushions and backrest with preparation for seat heating for MSG95 seats

Code Bundle DescriptionAL173828 Dark brown leather steering wheel



Wood-look trimsPersonalize your tractor cab with the new wood-looktrims. The kit includes decorative covers for the radioconsole as well as the rear and front part of theheadlining - one with preparation for sunshade. The new interior parts are easy to install and give yourJohn Deere tractor an elegant and extraordinary look!



AL175376 Stainless steel heat protection for exhaust pipe

Code Bundle DescriptionAL176910 Wood-look trims


Super Air Comfort seat - MSG95

Air suspended seat features:• Air suspension with low frequency technology is

specially designed for tractors with axle and cabsuspension. Absorbs jolts and vibrations andreduces unpleasant shocks to spinal column.Makes driving a calm, relaxed experience,especially at higher speeds.

• Horizontal adjustment 210 mm (8.27 inch) foreasy positioning in the cab.

• 100 mm (3.94 inch) vertical suspension travel toabsorb even the hardest shocks.

• Backrest angle adjustment: Individual backrestinclination supports the drivers back to preventpostural anomaly and reach an optimal seatingposition for a relaxed driving in all time.

• Integrated telescopic backrest extension from 475-645 mm (25.39 inch) for optimum back support.

• Weight adjustment: The adjustment to the correctweight of the driver is very important to assureoptimum functionality of the whole seatsuspension - for greater ergonomics and safety.

• Height adjustment (80 mm / 3.15 inch) for an idealseat position for every body size.

• Pneumatic lumbar support allows a quick andexact adjustment of the lumbar support to preventback problems. This comfort feature feels goodand prevents spinal injuries by ideally supportingthe back. It can quickly and precisely be adjustedto the individual contour of driver’s back.

• Horizontal suspension (45 mm / 1.77 inch) todamp oscillations of implements, trailers at highspeed or in difficult terrain. Minimizes horizontalvibrations when travelling fast, pullingimplements or trailers and when working on roughterrain to prevent harmful shocks from the driver’sback.

• Lateral suspension (+/- 25 mm / 0.98 inch) absorbsvibrations and shocks coming crosswise to thedriving direction to protect the diver’s back,especially the lumbar area for more comfortablesitting even when driving at slopes.

• The seat pan depth adjustment for quickadjustment of seat cushion to de driver’s bodysize. Optimally supports thighs of different length.

• Seat cushion inclination in 4 steps to reliefpressure from the knees.

• An active carbon layer is located under the seatcover removes body moisture and the discomfortof sweating. Features a special pore structurewhich absorbs millions of water molecules - 1cm2/0.16 inch2 of cover material has an innersurface nearly as big as a soccer field! Moreoperator’s comfort through a dry and pleasant seatclimate.

• Seat heating provides pleasant seat comfort evenduring cold days.

• Foldable armrest with height and angleadjustment: Wide and ergonomically contouredarmrests can be individually adjusted. Ensureperfect posture in the seat and relaxed armposition. Important: Armrests that are positionedtoo low promote an asymmetrical posture andarmrests that are positioned too high lead toshoulder or neck pain.

• Operator’s manual holder: always on hand and in atidy appearance.

• Seat switch• Adjustable swivel +/-15° for easy access in and

out of the seat as well as easier control of rearimplements.

• Optional CommandArm


Note: includes:- pneumatic lumbar support- seat cushion with heating- activated carbon layer- extra-thick seat cushion (101,6 mm /4 inch)

Note: order in addition seat belt AL117366


Note: includes:- pneumatic lumbar support- seat cushion with heating- activated carbon layer- extra-thick seat cushion (101,6 mm /4 inch)



AL175597Super Air Comfort seat MSG95, air suspended with operatorpresence switch(without CommandArm)


AL175596Super Air Comfort seat MSG95, air suspended with operatorpresence switch(with CommandArm)



Note: includes:- mechanical lumbar support- standard seat cushion (76,2 mm / 3 inch)

Note:order in addition seat belt AL117366 and telescopic backrest extension AL174234

Super Comfort seat - MSG85

Mechanical suspended seat features: • Mechanical seat suspension• Horizontal adjustment 210 mm (8.27 inch) for

easy positioning of the seat within the tractor cab• 100 mm (3.94 inch) vertical suspension travel to

absorb even the hardest shocks• Backrest angle adjustment: Individual backrest

inclination supports the drivers back to preventpostural anomaly and reach an optimal seatingposition for a relaxed driving in all time.

• Weight adjustment: The adjustment to the correctweight of the driver is very important to assureoptimum functionality of the whole seatsuspension - for greater ergonomics and safety

• Height adjustment (80 mm / 3.15 inch) for an idealseat position for every body size

• Mechanical lumbar support• Horizontal suspension (45 mm / 1.77 inch) to

damp oscillations of implements, trailers at highspeed or in difficult terrain. Minimizes horizontalvibrations when travelling fast, pullingimplements or trailers and when working on roughterrain to prevent harmful shocks from the driver’sback.

• Foldable armrest• Seat switch



Backrest extensionFor customers who require greater upper back supportfor MSG85 and MSG95 seats.


External swivelThe seat can be swiveled 180 degrees which allows aneasy operation of rear mounted equipment.


Note: for Super Comfort seat MSG85 and Super Air Comfort seats MSG95 without CommandArm


AL175598Super Air Comfort seat MSG95, air suspended with operatorpresence switch(without CommandArm)


7622 AL175599 Super Comfort seat - MSG85, mechanical suspended

Code Bundle DescriptionAL174234 Backrest extension

Code Bundle DescriptionAL119292 External adapter, 180° swivel


Instructional seat


Suspension for Instructional seat


Safety belt for instructional seat


Inner rear view mirror


Additional inside rear view mirrorThe additional rear view mirror is installed on theright-hand side of the rear window (in direction oftravel). It provides an excellent view on swingingdrawbar and rear-end attachments.


Code Bundle Description9230 AL173569 Instructional seat (not suspended)

Code Bundle DescriptionAL173570 Suspension for Instructional seat

Code Bundle Description9235 AL117734 Safety belt for instructional seat

Code Bundle Description9205 AL175679 Inner rear view mirror


AL151224 Additional inside rear view mirror,rear installation


External MirrorsLarge external mirrors provide increased trafficawareness for improved road safety and aid trailerreversing.

Telescopic rear view mirrorsTelescopic mirrors offer manually adjustabletelescopic arms with manually adjustable mirrors. Themirror mounts are offset on the stem to allow forfurther adjustment and better head clearance whenentering the cab.



Electrical, telescopic and heatedexternal mirrorsYou can keep track of your daily work in a much moreconvenient and comfortable way. The electricallyadjustable mirrors allow one man to set and adjust anexact positioning of the external mirrors whilechecking the view without leaving the driver’s seat.The mirrors feature electrically adjustable telescopicarms, electrically adjustable mirror heads as well asheating to remove condensation and frost.


Code Bundle Description7706 AL80126 Left hand telescopic rear view mirror

Code Bundle Description7706 AL80127 Right hand telescopic rear view mirror


AL157751 Electrical, telescopic and heated external mirrors


Rear windscreen wiperA large rear windscreen wiper, with intermittentswitching, maintain good vision in bad weatherconditions. Micro-switches are used to isolate wipermotor when the windscreen is open.


Rear windshield washerThe reservoir for the rear windshield washer isinstalled under the right-hand step. It can be reachedeasily, allows quick refilling.


Radio antenna in inner cab roofFor installation on the left-hand side of the inner cabroof (viewed in direction of travel).


Dual Beam Radar Sensor

Make sure your wheel slip is optimal - between 8% to12% for tractors with MFWD and 10% to 15% fortractors with two-wheel drive. Monitor your wheel slipaccurately with a dual beam radar sensor - save fuel,avoid soil compaction, increase your tractiveperformance, improve your efficiency.Benefits of NEW dual beam design:

• Assures a powerful and accurate signal - Dualbeam output makes radar less susceptible to hardsurface tall/wavy grass interferences.

• Accuracy is aided by a heavy-gauge mountingbracket and rubber isolators that reduce chancesthat vibration can effect the radio signal.

• Has a fast update rate - when the tractor comes tostop, accelerates or varies speed indicated groundspeed on the tractor display will closely match theactual ground speed.

• Dual beam radar sensors are self-calibrating, nosetup time is needed anymore.

The radar sensor may be installed only on tractorsequipped with a Basic Control Unit (BCU).

Code Bundle Description9100 AL174219 Rear windscreen wiper

Code Bundle DescriptionAL158767 Rear windshield washer

Code Bundle DescriptionAL173267 Radio antenna in inner cab roof



Note:please order in addition AL171547 field installation kit with mounting parts







Field office

The field office for the 6030 Series Premium tractors isa large portfolio pouch where papers, operatormanuals, music cassettes, personal notes andimplements information, or even a laptop computercan be stored.The entire unit is removable to be carried like a briefcase. Its base is also pre-wired to accommodateelectronic devices like mobile telephones, or laptopcomputers. The lid provides a flat writing surface.


Note: for tractors without electrical cooling compartment installed


Note: for tractors with electrical coolingcompartment already installed



RE278982 Ground speed radar sensor unitfor Europe only


RE278984 Ground speed radar sensor unitfor UK and Ireland only


RE278986 Ground speed radar sensor unitfor Australia only


AL171547 Field installation kit with mounting parts for ground speed radar sensor

Code Bundle Description9220 AL174262 Field Office

Code Bundle Description9220 AL174265 Field Office


9220 AL174264 Field Office and ElectricalCooling Compartment


Electrical Cooling Compartment - Fridge


Beverage coolerSpecifically designed for the operator’s station thebeverage cooler can be securely stored and easilyremoved. Especially on hot days the operator willappreciate the insulating capacity keeping food anddrinks cool.


Note: the cool box cannot be installed on tractors equipped with cup-holder AL163826

AshtrayThe ashtray is offered with hinged lid and made ofnon-flammable materials. The design conforms to therequirements of the accustomed John Deere design.The installation is easy because the ashtray fits to theexisting recess.


Sun visor

Fold down sun visor to keep that low level sun out ofthe operator’s eyes, from dawn to dusk.


Code Bundle Description9217 AL174263 Electrical Cooling Compartment


9215 AL112070 Cool box (incl. fastening straps, bracket and hardware)

Code Bundle DescriptionAL164673 Ashtray

Code Bundle DescriptionAL157620 Sun visor installation


Sunshade front or rearThe John Deere pull-down sunshade improveoperator’s comfort on sunny days by blocking directlight and reducing glare. In addition, they eliminateheat build-up in the cab. Due to an independentvertical adjustment the shades can be lowered andraised to any desired position - for highest operator’scomfort. This kit can be mounted to the front or rearwindow and include all needed hardware for fieldconversion - for an easy and convenient installation.


Bottle holderJohn Deere offers a bottle holder for convenient andsafe storage of bottles in 6030 Series Premium cabs.Rugged plastic provides the accustomed John Deerequality. The bottle holder is installed underneath theoperator’s seat in the corner between the step in thefloor and the console.


Note: not in combination withsuspended instructional seat

Cup-holder

Models: 6230 - 6930 PremiumNote: the cup-holder cannot be installed on tractors

equipped with cool box AL112070

Chock Block



Code Bundle DescriptionAL174359 Sunshade front or rear

Code Bundle Description9216 AL156731 Bottle holder, left hand

Code Bundle Description9218 AL163826 Cup-holder on front right post

Code Bundle DescriptionLG102426 Chock Block


AL156154 Bracket for installation on the left hand side 1

AL167955 Bracket for installation on the right hand side 1


Floor-mat


Multi-function control lever for M-ICV(2 functions)


Models: 7430 and 7530 Premium



Multi-function control lever for M-ICV(3 functions)



Joysticks for E-ICV control


Code Bundle DescriptionAL168015 Rear floor-mat






AL175022Joystick for M-ICV control withdiverter switches and HI-LO shifting(2 functions)








AL174410 Joystick for E-ICV withCommandArm



Air conditioning systemThe 6030 air conditioning system is powerful enoughto keep a comfortable in-cab temperature, whatever theoutside conditions are.








AL174227 Joystick for E-ICV without CommandArm

Code Bundle DescriptionAL181222 Air conditioning


AL174230 Bundle forair conditioning system 1

AL174402 Refrigerant hoseEvaporator to compressor, suction side, with air-brakes

1

AL174403 Refrigerant hoseEvaporator to compressor, suction side, without air-brakes

1

AL163559 Receiver dryer 1

L167673 Console, airconditioning compressor without air-brakes 1

AL157596 Deflexion roll without air-brakes 1AL180760 Refrigerant hose with air-brakes 1AL176192 Refrigerant hose without air-brakes 1

L114468 Poly-v-belt,2515 mm length

6230 Premiumwith air-brakes 1


6230 Premiumwithout air-brakes 1





L114292 Poly-v-belt,2500 mm length 6430 Premium 1

R128660 Pulley for fan 6230 Premium 1

R128659 Pulley for fan 6330 and 6430 Premium 1

FKM10446 Refrigerant 0,09

Code Bundle DescriptionAL181223 Air conditioning


AL174230 Bundle forair conditioning system 1

AL179098 Refrigerant hose

6530 - 6930 Premium;evaporator to compressor, suction side, without air-brakes

1


6530 - 6930 Premium;evaporator to compressor, suction side, with air-brakes

1


7430 and 7530 Premium;evaporator to compressor, suction side, without air-brakes

1


7430 and 7530 Premium;evaporator to compressor, suction side, with air-brakes

1

AL163559 Receiver dryer 1



Activated Carbon Air FilterThe activated carbon air filter provides extra comfortand protection against most airborne particles for thedriver of a 6030 Series Premium tractor under heavyduty conditions. It is equipped with a synthetic pre-filter, a pleated filter element and an activated carboncell.


L167673 Console, airconditioning compressor without air-brakes 1

AL157596 Deflexion roll without air-brakes 1AL180760 Refrigerant hose with air-brakes 1AL176192 Refrigerant hose without air-brakes 1














6930 Premium, 7430 and 7530 Premium withair-brakes

1


6930 Premium, 7430 and 7530 Premium withoutair-brakes

1


6930 Premium, 7430 and 7530 Premium

1

R128660 Pulley for fan 6530 Premium and 6630 Premium 1

R128659 Pulley for fan 6830 Premium 1

L169970 Pulley for fan6930 Premium, 7430 and 7530 Premium

1

FKM10446 Refrigerant 0,09


Code Bundle DescriptionAL158986 Activated Carbon Air Filter


5.2 WEIGHTSPlease note that the weights displayed in this catalogueare available through EPDC (DNS-System/JDPoint).

Front base weights

Models: 6230 - 6630 PremiumNote:not compatible with front PTO

Models: 6230 PremiumNote:not compatible with front PTONote: if tractor is equipped with a 551 Series front

loader only this front weight support can be installed (as it is dimensionally smaller than AL176563 front weight support, 60 kg)


Note:not compatible with front PTO

Quick-tatch weights


Note: includes 10 x 50 kg left (L38449) and 10 x 50 kg right (L38450)

Front weight stop kitThe attachment kit includes two special couplingweights weighing 50 kg each that can be used within afront weight package to create a trailer coupling. Thetotal kit weighs 100 kg.



AL176563 Front weight support, 60 kg(for max. 14 quick-tatch weights)


8770 AL176564 Front weight support, 70 kg(for max. 14 quick-tatch weights)


8771 AL176565 Front weight support, 110 kg(for max. 18 quick-tatch weights)


AL71258 Set of 20 quick-tatch weights,50 kg each

Code Bundle DescriptionAL119964 Front weight stop kit, 2 x 50 kg


Mounting kitsFor 6 - 18 quick-tatch weights




Pick-up weight - 1150 kg

Models: 7430 and 7530 Premium, 7430 E and 7530 E Premium

Note: for tractors with MFWD only


AL119967 Mounting parts for 6, 8, 10quick-tatch weights


AL119968 Mounting parts for 12 & 14quick-tatch weights


AL82932 Mounting parts for 16 & 18quick-tatch weights

Code Bundle Description9510 AL172542 Pick-up weight, 1150 kg


Pick-up weight - 900 kgFits on all 6030 Series Premium base weights and maybe installed on tractors with a three-point hitchinstalled either at the fornt or the rear.


Note: for tractors with MFWD only, cannot be installed in combination with front weights

Center link bracketRequired, if pick-up weight is used on the rear or front3-point hitch. Includes two spacer bushings, if 400 kgcentre pick-up weight section only is used in the 3-point hitch.


Horicon weight Package8 x 20 kg front weights with 20 kg carrier attached tothe front of frame behind a front weight.

Models: 6230 - 6930 PremiumNote: install only with 110 kg base weight


Front shields



Code Bundle Description9508 AL112166 Pick-up weight, 900 kg


9515 AL113121 Center link bracket for pick-up weight (with distance tubes)


AL160627Horicon weight package, 180 kg(8 x 20 kg front weights,1 x 20 kg beam)

Code Bundle DescriptionAL71269 2 x 20 kg front weights

Code Bundle DescriptionAL157299 Front shield, 4 cyl.

Code Bundle DescriptionAL157298 Front shield, 6 cyl.


REAR WHEEL WEIGHTS

Rear wheel weight - 38,5 kg


Note: Includes first set of parts bolted to the rim(base mounting parts).

Note:cannot be installed on tractors equipped with Titan wheels AL178765 (DW20Bx42) with bolt circle measuring 655 mm in dia.,in this case please order R167153 via COMPLETE GOODS instead


Note: Includes additional set of parts (if basemounting parts included in AL119955 are installed).


Rear wheel weight - 55 kg


Note: Includes first set of parts bolted to the rim(base mounting parts).

Note: cannot be installed on tractors equipped with Titan wheels AL178765 (DW20Bx42) with bolt circle measuring 655 mm in dia.,in this case please order R167153 via COMPLETE GOODS instead


Note: Includes additional set of parts (if base mounting parts included in AR56636 are installed).



Note: Please order in addition mounting parts according to parts catalog.



AL119955 Rear wheel weight set, 77 kg (2 x 38,5 kg)


AR56632 Rear wheel weight set, 77 kg (2 x 38,5 kg)


9525 AR56636 Rear wheel weight set, 110 kg(2 x 55 kg)


9525 AL119956 Rear wheel weight set, 110 kg(2 x 55 kg)


AL176898 Rear wheel weight set on palette,(20 x 55 kg)


5.3 CHASSIS PARTS

Rigid front fendersFor safer high speed road transport and reduced tractorsoiling. Large, full-coverage flexible front fenderswith wide range of adjustments to adapt to thedifferent tread settings to protect the cab from mud anddebris.






Conversion from rigid front fenders to turnable front fenders



Turnable front fendersA single arm fender for MFWD axles offers a greatersteering angle. It stops at the frame and turns while thetires move further until the maximum steering angle isreached. The turning circle now is the same as ontractors without fenders.

Code Bundle Description8841 AL180095 Rigid front fender, 370 mm width






AL175211 Conversion kit from rigid frontfenders to turnable front fenders


L165857 Strapfor tractors with front fenders of 355, 410 and 470 mm width

2

L170462 Strapfor tractors with front fenders of 520 and 600 mm width

2

L158118 Bumper 2

37M7199 Special hex headscrew M6X25 2

AL165335 Fender stop panelfor 6230 - 6430 Premium tractors with front loader application

1

AL165336 Fender stop panelfor 6530 - 6830 Premium tractors with front loader aplication

1


Models: 6230 - 6530 PremiumNote: for front loader application an additional fender

stop panel AL165335 (6230 - 6430 Premium) or AL165336 (6530 Premium) has to be ordered separately

For tire sizes:• 11.2R28• 12.4R24• 12.4R28• 280/85R28• 320/85R24• 320/85R28

Models: 6230 - 6830 PremiumNote: for front loader application an additional fender

stop panel AL165335 (6230 - 6430 Premium) or AL165336 (6530 - 6830 Premium) has to be ordered separately

Note:not for APL 2060For tire sizes:

• 13.6R24• 13.6R28• 14.9R24• 14.9R28• 340/85R24• 340/85R28• 380/70R24• 380/70R28• 380/85R24• 380/85R28


Note: for front loader application an additional fender stop panel AL165335 (6230 - 6430 Premium) or AL165336 (6530 - 6830 Premium) has to be ordered separately; for 6930 Premium, 7430 and 7530 Premium with front loader application no stop panel is needed

Note: not for APL 2060For tire sizes:

• 16.9R24• 16.9R28• 16.9R30• 420/70R24• 420/70R28• 420/85R24• 420/85R28• 420/85R30• 440/65R24



Note: not for APL 2060For tire sizes:

• 480/65R24• 480/65R28• 480/70R24• 480/70R28• 480/70R30

Code Bundle Description8842 AL180096 Turnable front fender, 370 mm width







Note:not for APL 2060For tire sizes:

• 540/65R24• 540/65R28• 540/65R30• 600/65R28

Fender side extensions

The fender extensions are a one piece design. They arecompatible for use with snow chains on the rearwheels, for example for forestry applications. Coverlarge tires and significantly reduce soiling of tractorand cab.


Note:6530 and 6630 Premium with suspended cabFor tire sizes:

• 18.4R38• 460/85R38


For tire sizes:• 13.6R38• 14.9R38• 16.9R34• 16.9R38• 18.4R34• 18.4R38• 420/85R38• 460/85R38• 480/70R34• 480/70R38• 520/70R38• 540/65R38


Note:7430 and 7530 Premium with suspended cabFor tire sizes:

• 20.R38• 520/70R38• 520/85R38• 580/70R38• 600/65R38• 650/65R38


For tire sizes:• 20.R38• 520/70R34• 520/70R38• 520/85R38• 540/65R38• 600/65R38• 650/65R38



AL174767 Fender side extension, 110 x 15 mm(4.33 x 0.59 inch)


8900 AL174768 Fender side extension, 110 x 60 mm (4.33 x 2.36 inch)


AL174769 Fender side extension, 200 x 20 mm(7.87 x 0.79 inch)


8900 AL174770 Fender side extension, 190 x 65 mm (7.48 x 2.56 inch)


Fender extensionFor heavy duty work and bad weather conditionsJohn Deere offers a mud flap kit for 6030 SeriesPremium tractors. The mud flap provides an additionalprotection to avoid dirt on your tractor and followingvehicles. It is made of rugged and flexible rubber, thatbears up against worst application conditions. The kitfits to all 6030 Series Premium tractors with a 190 mmwidth fender extensions.


Note:Can only be installed if the tractor already has a 190 x 65 mm side-extension on its fenders.

Mud Guards


Note: with suspended cab

Models: 6230 - 6430 PremiumNote: without suspended cab

Code Bundle DescriptionAL159975 Fender extension

Code Bundle DescriptionAL174142 Mud guard for step

Code Bundle DescriptionAL174141 Mud guard for step


5.4 AXLES

Extensions Rear axleRear axle extensions are available to match differenttread settings.

Models: 6230 and 6330 PremiumNote: In combination with rear wheels with bolt circle

measuring 203 mm in dia.Note: Increased tread setting from 1912 mm-1976 mm

Models: 6230 and 6330 PremiumNote: In combination with rear wheels with bolt circle

measuring 203 mm in dia.Note: Increased tread setting from 1916 mm-2004 mm

Models: 6230 and 6330 PremiumNote:order addionally: 1 x L116668

reinforcement ringNote: Increased tread setting from 1912 mm-2138 mm

Front axle


Note: In combination with front wheels with bolt circle measuring 275 mm in dia.

Note: Increased tread setting from 2016 mm-2134 mm

Track extension front and rear axleThe extended track and extra-wide vehicle lighting areintended only for 6-cylinder tractors with a 335 mm(13.19 inch) hole-circle diameter on front wheels andwith a 275 mm (10.83 inch) hole-circle diameter onrear wheels.In order to work as efficient as possible, progress inrow planting and the use of wider attachments demandflexible track widths. To meet these demands JohnDeere offers track extensions for 6030 Series Premium6-cylinder tractor models.With the help of the extended track, it is possible tocover more rows at once and to ride within the rowswithout affecting cultivations or banks. For sprayerapplications the new field installation kits provideanother advantage: the extended track of the tractorallows a superior support and balance adjustment ofthe sprayer.Two different extensions are available:

• Extension 2 x 94 mm provides a track extension to2000 mm. Depending on the overall tractor width,additional lighting kits for extra-wide vehicles areavailable.

• Extension 2 x 219 mm provides a track extensionto 2250 mm. Due to the resultant overall tractorwidth the kit also includes extra-wide vehiclelighting and a warning sign.


AL156776 Distance hub, 30 mm, for rear axle extension


8921 AL156779 Distance hub, 44 mm, for rear axle extension


8922 AL156777 Distance hub, 111mm, for rear axle, treadadjusting


8925 AL156778 Distance hub, 60mm, for centering the front wheels



Note:Maximum overall width of 2550 mm (100.4 inch)Note:For maximum overall width of 2550 - 2750 mm

(100.4 - 108.3 inch) extra-wide vehicle lighting is needed, please order in addition 1 x AL169786

Note:After installing the track extension please check position of front fenders and adjust if needed

Note:After installing the track extension please check steering angle and adjust if needed

Note:Must NOT be installed on tractors with dual wheels

Note: Important when extending the track of the rear axle and rear wheels are attached by studs and wheel nuts: length of studs has to be 120 mm (4.72 inch) and wheel nuts has to be M20 x 1.5. If required, please order 16 x L150648 (stud) and 16 x 14M7499 (wheel nut) separately.

Note: Important when extending the track of the rear axle and rear wheels are attached by wheel bolts: wheel bolts has to be M20 x 1.5 x 95 cap screws. If required, please order 16 x L152520 (wheel bolt) separately.


Note: Maximum overall width of 2750 - 3000 mm (108.3 - 118.11 inch)

Note: For maximum overall width of 2750 - 3000 mm (108.3 - 118.11 inch) extra-wide vehicle lighting and warning sign is needed, please order in addition 1 x AL164386

Note: After installing the track extension please check position of front fenders and adjust if needed

Note: After installing the track extension please check steering angle and adjust if needed

Note: Must NOT be installed on tractors with dual wheels

Note: Important when extending the track of the rear axle and rear wheels are attached by studs and wheel nuts: length of studs has to be 120 mm (4.72 inch) and wheel nuts has to be M20 x 1.5. If required, please order 16 x L150648 (stud) and 16 x 14M7499 (wheel nut) separately.

Note: Important when extending the track of the rear axle and rear wheels are attached by wheel bolts: wheel bolts has to be M20 x 1.5 x 95 cap screws. If required, please order 16 x L152520 (wheel bolt) separately.


AL162738 Track extended to 2000 mm(78.74 inch)


AL179433 Track extended to 2250 mm(88.58 inch)



Note:Maximum overall width of 2750 - 3000 mm (108.3 - 118.11 inch)


Note:Maximum overall width of 2750 mm (108.3 inch)

Reinforcement of rear wheelsFor heavy-duty operations in the field, the rear wheels(on flanged rear axle with fine thread) can be re-inforced with this kit.

Models: 6530 - 6930 PremiumNote:On tractors not equipped with a second spacer

ring, follwing parts must be ordered in addition:

Wheel disc reinforcementfor fixed-track rear wheels


Note: for the following fixed-track rear wheels AL176843 (DW18Lx42), AL176842 (DW20Ax42) and AL176841 (DW23Ax38)



AL164386 Extra-wide vehicle lighting and warning sign

Code Bundle DescriptionAL169786 Extra-wide vehicle lighting


AL155035 Rear wheel reinforcement for heavy duty operations in the field


L152520 M20 x 1.5 x 95 cap screw

for tractors with 80 mm long wheel bolts 16

24M7242 Washer for tractors with 80 mm long wheel bolts 16

L150648 M20 x 1.5 x 120 stud for tractors with 105 mm long studs 16


AL181265 Wheel disc reinforcementfor fixed-track rear wheels


5.5 BRAKES AND STEERING

Hydraulic trailer brakeThe hydraulic trailer brake system gives a powerful,safe braking function. The tractor brake-pedal operatedsystem gives a trailer braking function proportional tothe pressure applied to the pedal.The field kits below permit the tractor to be retro-fittedwith an hydraulic trailer brake.

Models: 6230 - 6630 PremiumNote: Depending on the options of the tractor,

additional spare parts may be required.

Models: 6830 and 6930 PremiumNote: Depending on the options of the tractor,




Code Bundle Description9350 AL173904 Hydraulic trailer brake


AL181348 Hydraulic trailer brake valve (I = 6)

not for UK

for 6330 and 6430 Premium tractors with MFWD

6530 and 6630 Premium tractors with or without MFWD

1

AL181374 Hydraulic trailer brake valve (I = 9,2)

6230 Premium with or without MFWD

for 6330 and 6430 Premium without MFWD

for UK: 6230 - 6630 Premium with or without MFWD

1

AL170827 Inlet valve forPrio 2 options

if tractor is not equipped with a suspended cab,a TLS-axle or a electro-hydraulic controlledpick-up hitch or a hydraulic stabilizer bar control valve

1



AL181348Hydraulic trailer brake valve (I = 6) 1



1



AL181348Hydraulic trailer brake valve (I = 6) 1



1


Pneumatic trailer brakeThe pneumatic trailer brake system consists basicallyof a two line system. This is the same as used today oncommercial vehicles.Pre-braking function:

• short brake pedal travel allows braking of thetrailer without braking the tractor. This feature isrequired to control the trailer and prevent jackknifing.

• A quick release valve opens the trailer brakeimmediately after release of the brake pedal forbetter acceleration.

Single line systems for pneumatic trailer brakes areavailable as well. These kits are supplementary to thedual-line systems, they can not be used stand alone.The dual-line system has to be installed first before thesingle line system should be ordered.The field kits below permit the tractor to be retro-fittedwith a pneumatic trailer brake system. The pneumatictrailer brake system may be installed only on tractorsequipped with a handbrake.



Models: 6230 - 6630 PremiumNote:without front axle brakeNote: Depending on the options of the tractor,


Models: 6230 - 6630 PremiumNote:with front axle brakeNote: Depending on the options of the tractor,



AL171459 Pneumatic trailer brake,single-line system


L101118 20 m (787.40 in.)compressed-air line (12 x 1.5) 1



9356 AL171451 Pneumatic trailer brake,dual-line system


AL171455 Additional partsfor air supply 1

AL171488Additional parts for enginewith air-conditioning(dual-line system)

6230 - 6430 Premium 1


6530 and 6630 Premium

1

AL171490Additional parts for engine without air-conditioning(dual-line system)

1

AL160421 Yellow coupler for UK only 1AL160422 Red coupler for UK only 1







AL171488Additional parts for enginewith air-conditioning (dual-line system)

6230 - 6430 Premium 1



1


1






Note:without front axle brakeNote: Depending on the options of the tractor,



Note: with front axle brakeNote: Depending on the options of the tractor,








1


7430 and 7530 Premium,7430 E and 7530 E Premium

1


1










1


7430 and 7530 Premium, 7430 E and 7530 E Premium

1


1





5.6 STORAGE Tool boxAn external detachable and lockable tool box withconvenient carrying handle is located in front of thecab. It has the capacity to hold tools and a selection oflinkage balls, hitch pins and linchpins for implementattachment.

Models: 6230 - 6930 PremiumNote:The toolbox is secured to the left hand-grip

of the cab using a strap.


Note:The bracket for the toolbox is installedbelow the cab.

Additional storage container - 45l

With a capacity of 45 l and a 45 kg maximum payloadthis sheet metal storage container offers additionalspace, e.g. for rubber boots, oil cans, bulky tools,grease guns etc.Equipped with 2 handles at the side it can easily becarried. With the help of the included quick lock pinthe container can be closed rapidly.The fastening on the back allows a quick installation toall existing front weights: base weights, front weightsand the 900 kg / 1150 kg pick-up weights.


8850 AL175285 Sheet metal tool box, mounted at the front of the cab on the left hand side


8850 AL175286 Sheet metal tool box, mounted at the front of the cab on the left hand side



Note:45 kg maximal payload; only for front installation: attachable to base weights, front weights and 900 kg / 1150 kg pick-up weight.

Code Bundle DescriptionAL120005 Storage container, 45 l


5.7 HITCHES AND ASSOCIATED EQUIPMENT

Release cablesFor upper and lower link hooks including hardware(screws, clamps, holder etc.)


Remote control switch unit (Mini-Flap)


Note:only needed if a remote control forthe E-SCVs should be installed


Note:only needed if a remote control forthe E-SCVs should be installed

E-SCV remote control switch



Note: include one switch, could be installed on the left hand side or on the right hand side of the remote control switch unit, if required please order 2 x AL174741 for installation on both sides

Note: if remote control switch unit is not installed please order in addition

PTO remote control switch



Note: include two switches for installation on the left hand side and on the right hand side


AL81619 Cables for controlling the center link and draft links


AL174742 Remote control switch unit (Mini-Flap)for left hand side


AL174743 Remote control switch unit (Mini-Flap)for right hand side

Code Bundle Description9325 AL174741 E-SCV remote control switch

Code Bundle DescriptionAL174740 PTO remote control switch


Stabilizer bar “Economy” For use only with cat. II and cat. III flat bar draft links.These provide manual adjustment of lateral hitchmovement.



Automatic stabilizer barAutomatic stabilzer bars offer for the respectiveimplements the possiblity to have:

• lateral sway over a self defined lower rangeand no sway above, or

• no sway over the whole range



Code Bundle DescriptionAL117961 Stabilizer bar “Economy”

Code Bundle DescriptionAL151119 Stabilizer bar “Economy”


AL176759

Automatic stabilizer bar

(include automatic stabilizer barfor one side and shock absorberfor the other side)


AL176760

Automatic stabilizer bar

(include automatic stabilizer barfor one side and shock absorberfor the other side)


Hydraulic Stabilizer BarsOperation through the CommandCenter: The hydraulicstabilizer bars can conveniently be adjusted from thedriver’s seat via the CommandCenter. They automatecoupling and working procedures of attached or semi-mounted implements with the following benefits:

• Automatic, height-independent centering andstabilization

• Infinitely variable, load-independent centering andstabilization

• Reduced wear due to play-free stabilization• Shock-free tractor ride for more comfort, e.g.

during headland turns when ploughing on slopes• Time saving• Convenient operation from inside the cab via

CommandCenter




Models: 6830 and 6930 PremiumNote:This software related field installation kit







7406 AL174568 2 Hydraulic stabilizer bars(RH and LH)


AL174516 Control block forpriority circuit 2

if tractor is not equipped with a hydraulic cab suspension and/or electro-hydraulic pick-up hitch

1

L167101 Endcover 1

L167830 Spacer block, 58 mm without hydraulic cab suspension 1

AL171917 Transmission wiring harness adapter

without hydraulic cab suspension 1


with hydrauliccab suspension 1






1

L167101 Endcover 1











1

L167101 Endcover 1







Stabilizer chains with sway control blocksFor almost universal implement control.

Models: 6230 - 6630 PremiumNote: for tractors with telescopic lift link or flat steel

lift link order in addition:

Lock for draft link hooksWhen implements with asymmetrical load areattached, or when driving through high-growingbushes and trees, the draft links must be securedagainst opening accidentally.


Swinging drawbar

Drawbars are adjustable in length and the swingingfeature can also be locked out.

Models: 6530 - 6930 Premium, 7430 Premium, 7430 E Premium


Note: not used with Powrshift transmission

Code Bundle DescriptionAL80849 Stabilizer chains

Bundle Description QTYL79378 Console for cat. II or cat. III 219M7489 Screw M16x45 for cat. II 419M7409 Screw M16x50 for cat. III 4

Code Bundle DescriptionAL165485 Lock for draft link hooks

Code Bundle Description9441 AL80054 Swinging drawbar with hammer strap


9441 AL81349 Swinging drawbar with hammer strap, includes swinging drawbar L115073



Note:used with Powrshift transmission

Load control shaft, support


Guide Ball HolderTo store the guide balls for hook type 3 point hitch andtop link quick couplers just where they are needed.

Models: 6230 Premium


Hitch Holder for upper wagon hitchChanging the implement from trailer to three-pointhitch in the field and not knowing where to put theupper trailer hitch.John Deere offers the solution - the hitch holder for theupper wagon hitch. The holder is a convenient solutionthat can easily be mounted within minutes onto allkinds of front weights with coupling recess.The wagon hitch can easily be affixed and is stored ina convenient height you can reach without stooping.The holder is adjusted with two fixing screws thatagain can be adjusted in two widths depending on theweight the holder has been mounted onto.



9441 AL119419 Swinging drawbar, includes swinging drawbar AL151017

Code Bundle DescriptionAL160835 Load control shaft support

Code Bundle Description9463 AL179161 Guide Ball Holder Cat.II

Code Bundle Description9463 AL180047 Guide Ball Holder Cat. III

Code Bundle DescriptionAL165650 Hitch holder for upper trailer hitch


Center link





Hydraulic Center LinkThe length of the hydraulic center link can be adjustedfrom the driver’s seat using the 3rd selective controlvalve. In addition, the center link can be actuated fromthe remote control switches on the fender.





7352 AL176534Center Link with hook and ball bushing, Cat. 2(rear hitch lift capacity 20 - 27 kN)


AL176533Center Link with hook and ball bushing, Cat. 3(rear hitch lift capacity 31 - 41 kN)


AL176532Center Link with hook and ball bushing, Cat. 3(rear hitch lift capacity 43 kN)


AL176535Center Link with hook and ball bushing, Cat. 3(rear hitch lift capacity 49 kN)


AL174550 Hydraulic Center Link(Cat. 3/70)






Hydraulic pick-up hitch (SCV controlled)


Models: 6230 - 6630 PremiumNote:Depending on the options of the tractor,

additional spare parts may be required:


Models: 6830 and 6930 PremiumNote:Depending on the options of the tractor,

additional spare parts may be required:



Note:Depending on the options of the tractor, additional spare parts may be required:


AL174109Field installation kit forhydraulic pick-up hitch(manually actuated)


AL174443Control components for upgrading AL174109 to electro-hydraulic controlled pick-up hitch


AL174516 Inlet valve forPrio 2 option

if tractor is not equipped with a suspended cab or hydraulic stabilizer barcontrol valve

1

AL174348 3-terminal socketat C-Post 1

L167830 Spacer, 58 mmif tractor is not equipped with a suspended cabcontrol valve

1

L167831 Spacer, 44 mmif tractor is not equipped with a hydraulic stabilizer barcontrol valve

1







if tractor is not equipped with a suspended cabor hydraulic stabilizer bar control valve

1



1

L167831 Spacer, 44 mmif tractor is not equipped with a hydraulic stabilizer barcontrol valve

1







if tractor is not equipped with a suspended cab or hydraulic stabilizer barcontrol valve

1


Drawbar


Wagon hitch release



Note: Depending on the options of the tractor, additional spare parts may be required:

Low position hitcheswith 3-in-1 wagon hitch




1

L167831 Spacer, 44 mm 1


9447 AL157346 Drawbar with storage for JD pick-up hitch

Code Bundle DescriptionAL174221 Wagon hitch release, fixed


Code Bundle DescriptionAL174220 Wagon hitch release, 9-position


AL171246 Push-pull cablewith height-adjustable trailer hitch and without suspended cab

1

AL171269 Push-pull cablewith height-adjustable trailer hitch and with suspended cab

1

AL171267 Push-pull cable for 7430 and 7530 Premium 1

Code Bundle Description9419 AL177172 Rail with piton fix insert slider





Low position wagon hitchesfor 9-position rail


Note: for 9-position rail only


Note: for 9-position rail only

Code Bundle DescriptionAL177174 Piton fix insert slider

Code Bundle Description9405 AL177173 Rail with ball type insert slider

Code Bundle DescriptionAL177175 Ball type insert slider


AL176731 Wagon hitch height-adjustable,piton fix


AL176726 Wagon hitch height-adjustable,ball


Forced steering systemfor wagon hitch height-adjustable(ball type)



Forced steering systemfor insert slider (ball type)



Yoke for draft link supportHinged to the left and right hand side rear axle, itprotects the draft sensor pins from shock loads underextreme draft work.



AL176727Forced steering system (two sides)for wagon hitch height-adjustable,ball type


AL176728Forced steering system (one side)for wagon hitch height-adjustable,ball type


AL176729 Forced steering system (two sides)for ball typ insert slider


AL176730 Forced steering system (one side)for ball typ insert slider

Code Bundle DescriptionAL78129 Yoke for draft link support


5.8 VANDALISM PROTECTION KITS

Latch for oil filler neck


Lockable fuel tank cap


Vandalism protection




AL110170 Field kit, latch for oil filler neck, transmission - vandalism protection

Code Bundle DescriptionAL113087 Lockable fuel tank cap


AL175117


(include lock for side panel and hood, latch for transmission oil filler neck and lockable fuel tank cap)


AL175118


(include lock for side panel and hood, latch for transmission oil filler neck and lockable fuel tank cap)


Security door lock kitLocking the cab with an individual key, different fromthe standard ignition key, is helpful for many differentapplications of the tractor. John Deere therefore offersthe Security door lock field installation kit. It featuresan individual key system that prevents misuse of thestandard ignition key. This field kit provides individualsecurity by individual keys for all equipment keptinside the cab. The kit comes with four keys, in case ofdamage or loss a blank key can be ordered.



Code Bundle DescriptionAL71345 Security door lock kit

Bundle Description QTYAL71350 Blank key 1


Numerical Index

Bundle No. Page Bundle No. PageAL71258 33 AL160835 53AL71269 35 AL162738 42AL71345 60 AL163214 3AL78129 58 AL163513 9AL80054 52 AL163826 29AL80126 25 AL164386 43AL80127 25 AL164673 28AL80849 52 AL165335 37AL81349 52 AL165336 37AL81619 49 AL165485 52AL82932 34 AL165650 53AL110170 59 AL168015 30AL112070 28 AL169786 43AL112166 35 AL171451 45AL113087 59 AL171452 45AL113121 35 AL171453 46AL117734 24 AL171454 46AL117961 50 AL171459 45AL118241 9 AL171547 27AL119292 23 AL172542 34AL119419 53 AL172591 8AL119955 36 AL172593 8AL119956 36 AL173267 26AL119964 33 AL173288 1AL119967 34 AL173290 2AL119968 34 AL173291 2AL120005 48 AL173422 2AL151119 50 AL173423 3AL151224 24 AL173569 24AL155035 43 AL173570 24AL156243 9 AL173596 11AL156731 29 AL173654 3AL156776 41 AL173828 20AL156777 41 AL173904 44AL156778 41 AL173905 44AL156779 41 AL173906 44AL157298 35 AL173952 10AL157299 35 AL173953 10AL157346 56 AL173954 11AL157620 28 AL174109 55AL157751 25 AL174110 55AL158520 10 AL174111 55AL158767 26 AL174141 40AL158986 32 AL174142 40AL159939 9 AL174214 15AL159975 40 AL174215 16AL160627 35 AL174219 26

Bundle No. Page Bundle No. PageAL174220 56 AL175117 59AL174221 56 AL175118 59AL174225 19 AL175211 37AL174227 31 AL175285 47AL174229 14 AL175286 47AL174234 23 AL175376 21AL174262 27 AL175583 13AL174263 28 AL175596 22AL174264 27 AL175597 22AL174265 27 AL175598 23AL174329 15 AL175599 23AL174332 12 AL175679 24AL174341 12 AL176040 18AL174341 15 AL176296 6AL174344 12 AL176297 6AL174345 14 AL176532 54AL174348 17 AL176533 54AL174350 20 AL176534 54AL174359 29 AL176535 54AL174410 30 AL176563 33AL174443 55 AL176564 33AL174444 55 AL176565 33AL174445 55 AL176726 57AL174550 54 AL176727 58AL174551 54 AL176728 58AL174568 51 AL176729 58AL174569 51 AL176730 58AL174570 51 AL176731 57AL174696 17 AL176759 50AL174697 17 AL176760 50AL174740 49 AL176806 6AL174741 49 AL176807 6AL174742 49 AL176898 36AL174743 49 AL176910 21AL174767 39 AL177081 54AL174768 39 AL177172 56AL174769 39 AL177173 57AL174770 39 AL177174 57AL174933 7 AL177175 57AL174934 7 AL177667 19AL174997 17 AL177668 19AL175020 30 AL179095 13AL175021 30 AL179161 53AL175022 30 AL179315 6AL175023 30 AL179316 7AL175024 30 AL179433 42AL175025 30 AL179613 18


Numerical Index

Bundle No. Page Bundle No. PageAL180047 53AL180095 37AL180096 38AL180097 37AL180098 38AL180099 37AL180100 38AL180101 37AL180102 38AL180103 37AL180104 39AL180369 4AL180370 5AL181054 5AL181055 8AL181056 8AL181222 31AL181223 31AL181265 43AR56632 36AR56636 36LG102426 29RE67013 16RE67014 16RE67015 16RE67016 16RE278982 27RE278984 27RE278986 27

Documents

VIVLIA ANTALLAKTIKWN 5.6130-6930 serie Prem