Volume-III Price Bid

AHMEDABAD MUNICIPAL CORPORATION

(HOUSING PROJECT DEPARTMENT)

TENDER

FOR

CONSTRUCTION OF NEW BUILDING OF NURSING SCHOOL AND HOSTEL AT SHETH V S HOSPITAL CAMPUS

VOLUME – III PRICE BID

Municipal Commissioner Ahmedabad Municipal Corporation. Sardar Patel Bhavan, Dana pith, Ahmedabad – 380 001

Sr. No. Items Total Quoted Amount

Rs.

A CIVIL WORK 90,997,052.09

B ELECTRICAL WORK 13,674,779.00

C FIREFIGHITING 3,640,685.00

TOTAL 108,312,516.09

Estimated Amount put to tender Rs.10,83,12,516.09Add_____% above Rs __________ TotaRs___________ In words______________________________ ______________________________________

Estimated Amount put to tender Rs. 108,312,516.09Deduct_____% below Rs __________ Net Rs__________ In words______________________________ ______________________________________

SUMMARY OF PRICE SCHEDULE COST

PROPOSED CONSTRUCTION OF NEW BUILDING OF NURSING SCHOOL & HOSTEL AT SHETH V.S. GENERAL HOSPITAL CAMPUS AT ELLISBRIDGE, AHMEDABAD.

I/We am/are willing to carry out work at __________% above/below (should be written in figures and words) the estimated amount mentioned above. Amount of my/our tender works out as under

Page 1

BILL OF QUANTITY FOR PROPOSED CONSTRUCTION OF NURSING SCHOOL & HOSTEL BUILDING AT

SHETH V.S. HOSPITAL CAMPUS AT ELLISBRIDGE. AHMEDABAD.

S U M M A R Y (CIVIL)

Sr. No. Items Total Quoted Amount Rs.

1 EARTH WORK 2,301,422.64

2 CONCRETE 48,649,585.00

3 MASONRY WORK 3,422,796.00

4 WALL FINISHING 5,462,467.50

5 TRIMIX CONCRETE AND EXPANSION JOINTS. 1,875,000.00

6 WATER PROOFING 1,561,809.00

7 STRUCTURAL STEEL 308,700.00

8 FLOORING 11,483,726.00

9 DOORS AND WINDOWS 6,439,600.00

10 PAINTING 1,727,230.50

11 MISCELLANEOUS 1,070,492.85

12 WATER SUPPLY, DRAINAGE AND SANITARY 6,694,222.60

Total in (Rs.) 90,997,052.09

Sr. No. Quantity Unit Description of Item Rate per

Unit Amount

1.00 EARTH WORK1.01 Excavation in all sorts of Hard Soil including soft murram, for

any activity but not limited for, foundation of wall, columns,Ground beams, raft, ducts, pipe trenches, U.G. Tank,Compound walls, steps, drains and all other miscellaneousexcavation etc. as per specifications including shoringshuttering, bailing out surface water, pumping of water,including backfilling in all types foundation trenches,compacting and consolidating etc complete, rate includesconveyance charges of remaining surplus earth from site asdirected with the any lead in the city as directed by Clerk-of-Work.

a) 6062.00 Cmt Up to 1.5 Mt. Depth 106.50 645,603.00b) 5760.00 Cmt From 1.5 Mt to 3.0 Mt depth 111.42 641,779.20c) 5357.00 Cmt From 3.0 Mt to 5.0 Mt depth 116.02 621,519.14d) 790.00 Cmt Above 5.0 Mt. 120.82 95,447.80

1.02 570.00 Cmt Filling the river sand in plinth / Trenches or where necessarywith, in layers of 15 cms to 20 cms including watering,ramming and compacting-consolidating to achieve MDD atOMC., etc. complete as directed including cost oftransportation etc complete as directyed by Clerk-Of-Work.with For levels and leads.

212.75 121,267.50

1.03 190.00 Cmt ....DO.... as per item no. 1.02 but with selected earth broughtfrom outside site incl. Freight transportation, loadingunloading royalty, screening, etc. Complete as perspecifications and as per directions of Clerk-of-Work. For alllevels and leads.(only for landscape purpose).

192.10 36,499.00

1.04 2843.00 SMt Providing and laying pre-construction Anti termite treatmentas per IS-6313 (Part-II) 1971 from standard and specifiedagency approved by Clerk-Of- Works with ten yearsguarantee in foundation, under floors and periphery as perthe special agency's specifications and as per directions ofClerk-of-Work. For all levels and leads.

49.00 139,307.00

(Note: measurement on plinth area shall be paid. Anyprojection shall not be considered in plinth area)

Note:-1) Consolidated measurements of fill shall be paid in case ofitem no.1.02,1.03,and 1.042) For item no 1.01 continuous pumping of water if requiredhas to be done during excavation and also during concretingwork without any extra cost.3) R.O. stands for Rate Only.TOTAL:- 2,301,422.64

Civil

1


Unit Amount

Civil

2.00 CONCRETE-( Unless specified as per IS-456 – 2000)

2.01 420 Cmt Providing and laying machine mixed plain cement concrete ofM10(1:4:8), for any thickness (IS-269) with 37 MM and downblack trap stone aggregates (IS-383) of approved quality, ofspecified mix and grade including centering and shuttering,laying, spreading, ramming, consolidating, curing etc.complete for all types of foundations below footings, walls,rafts, columns, Plinth floors etc. complete as directed for alltypes and shapes at all levels as per directions of Clerk-Of-Works.For all levels and leads.

1,767.00 742,140.00

a) 820 Cmt For Foundation Footings in M20 3,218.00 2,638,760.00

b) 450 Cmt For Floor Concrete in M20 3,229.00 1,453,050.00

c) 570 Cmt For Columns and Pedestal at All floors in M25 5,185.00 2,955,450.00

d) 2320 Cmt For Slabs at All levels M20 up to 150 mm Thick 4,084.00 9,474,880.00

e) 1150 Cmt For Beams / breackates at all Levels in M20 4,035.00 4,640,250.00

f) 15 Cmt For Coping as per detail in M20 3,403.00 51,045.00

g) 292 Cmt For RCC Wall / Pardi for as per design at All Levels in M20 4,070.00 1,188,440.00

h) 80 Cmt For in staircase with steps / Kadi Tappa, waist slab andlanding at any height and level as directed. In M20

4,152.00 332,160.00

i) 25 Cmt For Lintels at All level as per design in M20 3,798.00 94,950.00

j) 20 Cmt For any Type of Chajja at all levels in M20 3,798.00 75,960.00

2.02 Providing and laying in position machine mixed and machinevibrated reinforced cement concrete confirming to grade M25/ M20 of IS-456,2000 and as per specification and drawing(IS-3558) for all types of reinforced cement concretestructural elements, viz. Foundations, floor slab, slab onground, raft, plinth beams, columns, beams, slabs, flatslabs, mullions, sunk slabs, copings lintel, lofts, chajja,retaining walls, parapet boxes, folded plates, weather shedgutters, fins, stair cases, sloping slabs etc., curved/circularsurfaces, as specified and as per structural design and asdirected using 20 mm and down graded machine crushedaggregate including necessary centering and shuttering atany lift and lead as specified finishing concrete surfaces,curing etc.aiso include , providing dripmoulds , groves ,bands , rebates as directed including the necessary cubestests and slump tests with satisfactory result etc.forfoundation , plinth level and super structure member asmentioned hereafter.excluding placing of reinforcement,cutting, bending and binding with 1.25mm (18 guage) to 1.6 m

2


Unit Amount

Civil

2.03 Placing of reinforcement, cutting, bending and bindingwith1.25mm (18Gauge) to 1.6mm ( 16 gauge ) annealedwires, welding if necessary etc. steel reinforcement MS / TorSteel (Thermo Mechanically Treated) for RCC structures asper design including transporting steel, unloading, storingand incidental charges for handling, complete as directed.Payment will be made on the length basis and standard co-efficient to convert in weight as per IS. (Rolling margins andwastages will not be paid.) (IS-432 (Part I) Mild Steel,Medium, Tensile Steel. IS-1786 HYSD, IS-2502, IS-814Electrode for welding). as directed by Clerk-of-Work. For alllevels and leads. (as per drawing).

a) 685 Mt Tor Steel Fe415 (T.M.T.) 36,500.00 25,002,500.00Note:1) The rate shall be including providing of all materials andlabour, mixing, placing, forming pockets for foundation bolts,placing insert plates as shown in drawing at correct locationetc. Including necessary centering, shuttering, curing etc.complete.2) In all RCC Structures machine cut aggregate of size 20mm and down unless & until specified to be used and ratesare deemed to be the same.3) For item nos. 2.01& 2.02 rate should include the cost of de-watering by pumping, in case it is required during theconcreting as well as shuttering below the plinth.4) For formwork to be executed under the contract shall berequired to get it approved by Clerk-Of- Works.5) Only auothorised chairs/spacer shall be measured. No laplength shall be paid.

TOTAL:- 48,649,585.00

3


Unit Amount

Civil

3.00 MASONARY WORK3.01 Providing and constructing brick masonary 230 mm thick

and above 230mm thick , in CM 1:6 (1 cement : 6 coarsesand) for all types of Walls, Foundation footing, Compoundwall, Retaining wall.with approved good quality bricks havingcrushing strength of minimum 35 kg/sq cm includingscaffolding, raking out the joints, curing etc complete asdirected by Clerk-Of-Work.

(a) 55.00 Cmt. For foundation & plinth 1,408.00 77,440.00(b) 789.00 Cmt. For Ground & First floor 1,471.00 1,160,619.00( c ) 1230.00 Cmt. For Second & Above 1,485.00 1,826,550.003.02 Providing and constructing 115mm / 90mm thick brick

masonary in partition walls with approved good quality brickshaving a crushing strength of minimum 35 kg/sqcm in CM1:4 (1 cement : 4 coarse sand). The rate for 115mm / 90mmthick wall in Sq. Mt. & including scaffolding, racking outjoints,6mm dia plain M.S. round bar, curing etc complete asdirected by Clerk-Of-Work.

(a) 3.00 SMt. For foundation & plinth 204.00 612.00(b) 545.00 SMt. For Ground & First floor 216.00 117,720.00( c) 1100.00 SMt. For Second & Above 218.05 239,855.00

NOTES :1) The rate shall include for supplying of all materials,labours, tools and plants, forming openings, necessaryscaffolding, racking out of joints, curing etc complete.2) Holes or Zaries in the brickwork for rain water pipes andother pipes shall be kept or the pipe shall be provided at thetime of raising of masonary. Nothing extra shall be paid for.These holes or zaries should be plastered and made goodafter fixing3)Holes or Zaries in the brickwork shall not be allowed forScaffolding work.4) The bricks/ Stones shall be fully waterd before used.5) All test shall be carried out by Contractor as per IS withsatisactory result & No Extra payment shall be made for it.

TOTAL:- 3,422,796.00

4


Unit Amount

Civil

4.00 WALL FINISHING4.01 30287.00 SMt Providing and laying, 20 mm thick double coat “Mala” plaster

to the Internal side of walls, Beams, Columns, pardi , ceiling ,chajja & RCC walls etc in the proportion of cement mortar1:4 for first coat (12 mm thick) and cement mortar 1:2 forsecond coat (8 mm thick) to all types and shapes of bricks,stones or RCC surfaces at all respective levels in line, leveland plumb including normal straps, grooves, drip moulds,embossed bands, jambs, etc. complete and includingroughening the surfaces with necessary scaffolding, curing,cleaning the floor after application, providing & fixing chickenwire mesh of 24 gauge of 300 mm width at the junction ofbrick work & RCC work including fixing with nails, rawl plugsetc before applying plaster as per drawing/instruction of Clerk-Of-Work etc. complete. For all levels, hights and leads ofworks.

135.00 4,088,745.00

4.02 6705.00 SMt Providing and laying, 20 mm thick double coat “Mala” plasterOR "sand face(Tippani)" plaster to the External side of walls,Beams, Columns, pardi & RCC walls etc in the proportion ofcement mortar 1:4 for first coat (12 mm thick) and cementmortar 1:2 for second coat (8 mm thick) to all types andshapes of bricks, stones or RCC surfaces at all respectivelevels in line, level and plumb including normal straps,grooves, drip moulds, embossed bands, jambs, etc.complete and including roughening the surfaces withnecessary scaffolding, curing, cleaning the floor afterapplication, providing & fixing chicken wire mesh of 24 gaugeof 300 mm width at the junction of brick work & RCC workincluding fixing with nails, rawl plugs etc before applyingplaster as per drawing/instruction of Clerk- Of-Work etc.complete. For all levels, hights and leads of works.No holesin wall will be permitted for scaffolding. Only Double stagescaffloding is to be used.

135.00 905,175.00

4.03 5945.00 SMt Providing and applying 15mm thk internal Single Coat Malacement plaster in 1:4 (1 cement : 2 coarse sand : 2 finesand) to all RCC, Ceiling,chajja and wall etc surfaces at alllevels including providing drip mould, grooves, includinghacking of concrete surface, providing & fixing chicken wiremesh of 24 gauge of 300 mm width at the junction of brickwork & RCC work including fixing with nails, rawl plugs etcbefore applying plaster as per drawing/instruction of Clerk -Of- Work, using double scaffolding to any ht. curing andfinishing smooth or as directed by site incharge,curing andproviding grooves, drip mould or any detail as perArchitectural drawing without any extra charge complete in allrespect. as directed by Clerk-Of- Work at all lift, level andleads.

75.50 448,847.50

5


Unit Amount

Civil

4.04 250.00 SMt Providing and laying 15 mm thick cement water proofingplaster to slabs / Sunk portion etc includes necessary sidevattah & fixing chicken wire mesh of 24 gauge of 300 mmwidth at the junction of brick work & RCC work includingfixing with nails, rawl plugs etc before applying plaster as perdrawing/instruction of Cler -Of-Work, in CM 1:3 at all levelsusing water proofing compound of approved quality as permanufacturer's specifications and finishing top with cementslurry complete. All areas water proofed shall be tested withwater. as directed by Clerk-of-Work. For all lift,levels andleads.

78.80 19,700.00

NOTES:1) Sand used for plaster work shall be used after sieving onlyas per item requirement.2) Grooves and drip moulds in plaster to be made asrequired elevations and instructed by the Architects withoutany extra charge.3) No holes in wall will be permitted for scaffolding. OnlyDouble stage scaffloding is to be used.TOTAL:- 5,462,467.50

6


Unit Amount

Civil

5.00 TRIMIX CONCRETE AND EXPANSTION JOINTS.

5.01 Providing and laying controlled cement concrete in GradeM20 in required slope, machine mixed, machine & trimixvibrated water tight in building / out side building as per itemno. 2.0 above but with the use of “TRIMIX VACCUMDEWATERING SYSTEM” for spreading, screeding,dewatering, floating and troweling with the help of powertrowelling floater of concrete floor as directed and specifiedusing necessary steel form work with M.S. Channelsincluding providing & laying sepration layer of 125 micronexpanded polythin foam sheets . Rate includes formingconstruction & contraction joints 4 mm to 6 mm wide bycutting the floor upto ¼ th depth of thickness of the concretedepth using mechanical saw up to full depth of cuttingincluding providing & fixing M.S. dowells bars with bitumenpainted of full length as shown in drawing as to form thebays not exceeding 6.0 m X 4.5 m etc. complete as perdirected by Architect or Clerk-of-Work. For all level andleads.

5.01(i) 405.00 Cmt For up to 200 m thick 4,400.00 1,782,000.005.02 310.00 RMt Providing & constructing 20 mm wide & full depth Expansion

joint including providing 20mm th Expansion board (Shalitex or equivelant brand ) painted with bitumen on bothsides and filling the joint with polysulphide sealent material(20mm x 30mm ) or equivalent, fixing M.S. Dowell barpainted with bitumen upto full length & one side 25mmpvc(1.5mm thick) rigid pipe with plug as per the givendetailed drawing and Directed by Clerk- of-Work.etccomplete for all level and leads. NS

300.00 93,000.00

TOTAL:- 1,875,000.00

7


Unit Amount

Civil

6.00 WATER PROOFING6.01 2508.00 SMt Providing and, laying (India Type Waterproofing) integrated

cement based propriety water proofing treatment of requiredthickness over the roof and sloping out terrace slabs or Sunkslab with following specification laid to required slope notflatter than, 1: 80 (the thickness of water proofing treatmentnear rainwater outlet or the lowest point of the finished slopeshall not be less than 65mm, including treating the verticalsurface of the parapet wall up to 30 cms height abovefinished level of terracing including finishing the top with jointless water proofing , plaster, curing, testing etc. completeIncluding: 10 years performance guaranty. Clerk- Of-Worketc. complete. For all levels, hights and leads ofworks.(Measurement: Only on plan area shall be paid)

375.00 940,500.00

6.02 2327.00 sMt Providing and applying 3-coats of Acrylic polymercementatious based with fiber glass net reinforce in thesandwich water proofing on terrace, vertical sides ofbasement wall (outerside), gutter, slab including cleaning thesurfaces of terrace, filling the cracks if any with Epoxy orcement grout or silicon sealant as per Following process withall labours and materials used for the work as directed byClerk - of - work. or Consultants with all level, leads nlifts.(Measurement: Only on plan area shall be paid forterrace & bath/w.c/wet area and o/s basement wall shall bemeasured as per actually area treated.)

267.00 621,309.00

Process:1. Cleaning the terrace and wall surface with wire brush orbroom or any mechanism, remove foreign matter , cementmortar, Organic or inorganic matter, lumps, etc.2.The rate includes filling the cracks if any with epoxy groutor cement grout or silicon sealantas per instructed by Clerk-Of-Work.3.Apply 1st coat of Acrylic polymer mixed with OPC 43 gradecement in Proportion 1:1(1- Part of Acrylic Polymer: 1- Partof 43 Grade OPC cement) by Brush in 250 micron thickness.

4.Providing and laying fiber glass net will be reinforced in thesand witch (second layer) of acrylic polymer cement coat &apply coat as per 1st coat on fiber glassmesh.5. Applying final coats of same as 1st coat. (and shall carry agurantee against defects for 10 (Ten) years and finishedsmooth as approved.Total:- 1,561,809.00

8


Unit Amount

Civil

7.00 STRUCTURAL STEEL7.01 2.00 M.T. Providing and fixing M.S. Plates in slabs, Beams, Columns or

any RCC member as a insert plates, shoe plates, Base plate,Gusset plates of any size and any thickness including of alllabours and materials for all levels ProfileCutting,threading,drilling, Nut-Bolting, Welding and applyingRust remover and 1-coats of Zinc Chromate / red lead paintand three or more coats of synthetic enamel paint ofapproved shade and made (“Asian or Tata or" equi.) asdirected and specified as directed by Architect / Clerk-Of-Work.For all levels, lift and leads.

44,100.00 88,200.00

7.02 5.00 M.T. Supplying, fabrications, transporting and erecting forStructural Steel Floor / Pipe Racks/ Plateform Etc. inposition at all levels as per drawing welded / bolted ( Hiltybolt or mechanical driving / Bolting system) / riveted steelstructures with field bolting / riveting / welding / drilling/Cutting, Threading wherever necessary, Necessary steelscafolding, applying one coat of rust remover, one coat ofzinc chromate / red lead paint and three or more coats ofsynthetic enamel paint of approved shade (Asian” orequi.)and made as directed and specified including Steelwork welded in built up sections framed work of I section,Tube section, RHS & SHS Section,channels, angles, tees,Pipes,flats with angle cleats as square bars,M.S. Round bars('TATA or SAIL or VAISAG Make/ Equivelent ISIMake)etc as directed by Architect / Clerk-Of-Work. For alllevels and leads & any Height .No extra payment shall bemade for Hilti bolt for fixing plate od section with RCCmember.

44,100.00 220,500.00

Total:- 308,700.00

9


Unit Amount

Civil

8.00 FLOORING8.01 5421.00 SMt Providing & laying 25mm thick hand cut and machine

polished green kotah stone flooring of size up to 450 x600mm, over 40mm thk. Bedding of cement mortar 1:6 withflush pointing of joints, cutting and dressing of stone as perfloor trap size and shape, exposed edges of stone in floorshall be machine grinded and three coats machine polishedand wax polishing ,curing etc. complete as directed by Clerk-of-Work. For all,lift levels and leads.

591.00 3,203,811.00

8.02 250.00 SMt Providing & laying 30mm thick machine cut Rough kotahstone flooring of size up to 450 x 600mm, over 40mm thk.Bedding of cement mortar 1:6 with flush pointing of joints oras specified, cutting and dressing of stone as per floor trapsize and shape, exposed edges of stone in floor shall bemachine grinded and curing etc. complete as directed byClerk-of-Work. For all,lift levels and leads.

362.00 90,500.00

8.03 2264.00 RMt Providing & fixing polished green kotah stone skirting 75mmheight using prepolished machine cut kotah with flushed tothe wall plaster per directed by Clerk-of-work with stones ofsize as per requirement and thickness of 15 to 20 mm over abedding of 12 mm thick cement mortar 1:4 with flush pointingof joints with cement paste includes hand machine polishingetc. complete as directed at all,lift, leads & levels/heights.Proper care shall be taken for matching the joints of floor with skirting / dado up to the satisfaction of Clerk - of - work andfor that nothing extra shall be paid.

65.00 147,160.00

8.04 425.00 RMt Providing & fixing Rough kotah stone skirting 75mm heightusing prepolished (Riverwash finish) machine cut kotah withflushed to the wall plaster per directed by Clerk-of-work withstones of size as per requirement and thickness of 15 to 20mm over a bedding of 12 mm thick cement mortar 1:4 withflush pointing of joints with cement paste includes handpolishing etc. complete as directed at all levels/heights.Proper care shall be taken for matching the joints of floor with skirting / dado up to the satisfaction of Clerk - of - work andcomplete as directed by Clerk-of-Work. For all,lift levels andleads.

55.00 23,375.00

8.05 383.00 SMt Providing and laying polished green kotah stone of uniformthickness of 25 mm with three side machine cut edges fortreads / risers and sides of stair steps,window sill (in singlepieces where ever specified OR in double piece where everspecified as per detail ) including provision of holes for gaspipes and open terrace, window sills,including polishing andwax polishing etc. complete as directed by Clerk-of-Work.For all, lift levels and leads.(No extra payment shall be madefor Architectural detail).

635.00 243,205.00

10


Unit Amount

Civil

8.06 560.00 SMt Providing and laying polished jesalmer, green or whitemarble or equivelent stone of uniform thickness of 18 mmfor flooring in cement slurry over minimun cement mortar of50mm 1:3 laid to proper slope, line and level, as specifiedincludding using white cement with or without colour mixingas per shade of approved quality in pointigs to joints alsojoints fill wirh acrylic grout filler and appling neat cementpaste about 3 kg/sq.Mtr., curing and cleaning complited alsofor wall cladding as directed by clerck of work for all,lift,Levels and leads.( No extra payment shall be made forArchitectural detail and for wall cladding/dedo the rate shallbe included of 12 to 20mm plaster beding as required.)

1,430.00 800,800.00

8.07 55.00 SMt Providing and fixing sandwich stone (Top stone of spedifiedgranite stone and Bottom stone of Kotah stone) platform ofas per site requirement and Architectural Drawings includingP & F necessary sandwich vertical supports of polished kotastone, provision for gas pipes etc. Complete as directed andup to the satisfaction of Clerk-ofworks. The rate includingcutting, making holes for sink in stone. Complete as directedby Clerk-of-Work. For all,lift levels and leads.

3,646.00 200,530.00

8.08 2540.00 SMt Providing & laying Floor/ dado( 'kajaria' or 'Asian' or 'Nitco' or'Johnson' or equivelent brand make') of glazed tiles of 6mmthick and of approved quality and colour as per the givenpattern fixed over 12 mm to 20mm thick plaster in CM 1:3including corners, angles beading and using white cement inpointing of joints and applying neat cement paste about 3kg/sq.Mtr., cleaning etc. complete in colour & pattern asdirected by Clerk-of-Work (size 200 x 300 mm / 300 x 300mm / as per architect's details) for dado the rate shall beincluded of 12 to 20 mm plaster beding as required.Complete as directed by Clerk-of-Work. For all,lift levelsand leads.

656.00 1,666,240.00

8.09 520.00 SMt Providing and laying 6 mm thick coloured, Matt Ceramic Tileflooring of 300 mm x 300 mm size ('Kajaria' or 'Asian' orNitco' or 'Johnson' or their equivalent) of first quality as perthe selection of the Consultants in flooring & wall calddingover 12 to 20 mm thk plaster in CM 1:3 including all and asper the given pattern using two or more different colours /textures of tiles laid over 30 mm thick cement mortar beddingof 1 : 4 proportion (1 part of cement and 4 parts of mediumcoarse graded sand) floated with thick and neat cement paste having consumption of cement @ 3.5 kg./sqm. including tightjoints filled with white cement paste, finished to requiredlevel, curing etc.For dedo the rate shall be included of 12 to20 mm thk plaster bedding required. At all heights as per thedetails given by the Consultants. Complete as directed byClerk-of-Work. For all, lift, levels and leads.

664.00 345,280.00

11


Unit Amount

Civil

8.10 85.00 RMt do - as above but for skirting of average 75mm height.NS. 90.00 7,650.008.11 3405.00 SMt Providing and fixing appropriate thickness of full body

vitrified polished tiles of 600mm x 600 mm Size and 10mmthk ( Kajaria, Asian,Nitco or their equivalent) as per detail, infloor of approved make and of approved colour of firstquality, even shade, set in cement slurry over minimum 50mm thick cement mortar 1:3 laid to proper slope, line andlevel, as specified including using white cement with orwithout colour mixing as per shade of approved quality inpointing of joints also joint fill with acrylic grout filler andapplying neat cement paste about 3 kg/sq.Mtr., curing andcleaning complete as directed by Clerk-of-Work. For all,lift,levels and leads.

915.00 3,115,575.00

8.12 1310.00 RMt Providing & fixing polished full body Vetrified Tilesskirting 75 mm heightand 10mm thk ( Kajaria,Asian,Nitco or their equivalent) using with a flushed to thewall plaster as per directed by Clerk-of-work with vetrifiedtiles of size as per requirement and thickness over a beddingof 12 mm thick cement mortar 1:4 with flush pointing of jointswith cement paste & filling the joints with white cement & addcolour to match the tiles includes cleaning, washing, cuttingetc. complete as directed at all levels / heights. Proper careshall be taken for matching the joints of floor with skirting /dado up to the satisfaction of Clerk-of-work and complete asdirected by Clerk-of-Work. For all,lift, levels and leads.

113.00 148,030.00

8.13 2430.00 SMt Providing China mosaic of White / Colour broken glazed tilesflooring, laid on a bed of12 mm. thick cement mortar 1:3 (1cement: 3 coarse sand) finished with flush pointing in whitecement including vata and patternas directed by clerk - of -work / Architect.For all, lift, level and leads.( Measurement:only plan area shall be paid.)

296.00 719,280.00

8.14 1110.00 SMt Providing and laying 80 mm thick grey or coloured ReflectiveRubber mould (Lacquer coated) paver block over a bed ofsand ( min 75 mm thickness.) job includes spreading sandon existing driven way, compacting sand bed by rammingand interlocking them with the use of a suitable plate vibrator.job includes all incidental work like cleaning the site of debrisetc. The paver blocks supplied by the party must confirm tofollowing notes and completed as directed by Clerk-Of-Workand up to satisfactory of Clrk-Of-Work.For All level, lift,leads..( No extra payment shall be made for Architecturaldetail )

680.00 754,800.00

8.15 110.00 SMt Providing and laying 50mm Indian patent stone( I.P.S.-cement flooring) in uniform thickness in grey or red orspecified colour as directed.1 part cement, 2 parts coarsesand and 4 parts of black trap rock stone aggregate byvolume. Grading of aggregate shall be as per specificationsfor RCC work. Job includes to the do existing surface rough,includes all incidental work, making groove, making panel(not more thane 2.0sq.m.), vatta, all labour & material up tosatisfaction of the Clerk-Of-Work and complete as directedby Clerk-Of-Work. For All Levels, Lift & leads..( No extrapayment shall be made for Architectural detail )

159.00 17,490.00

12


Unit Amount

Civil

Notes for paver block.:-1.(a) The make of the paver block must be reputed one.The party will have to take prior approval of Architect/ clerk-of-work. Before selecting any particular make and its decisionwill be binding.( b) The paver blocks must be prepared in Hi techMachins,compressed by means of hydraulic pressure, andcured in steam curing chambers.( c ) At the time of manufacturing, Paver blocks will have to be given special treatment regarding wearing coat by adding ironite powder in preparation and method approved by Architects/ clerk-of-work.( d ) Compressive strength of Paver block should not be lessthan 350 kg/ cm2. ( testing as per IS : 2185 part-v- 1979 )

( e ) Abrasion wear not exceeding 2mm ( Testing as per IS :1237-1980 )( F ) Average absorption percentage not exceeding 10 % (Testing as per IS : 1237-1980 )( g ) Flexure : Average wet transverse strength not less than3 N/mm2 ( Testing as per IS : 1237- 1980 ) ( h ) Party to submit necessary test certificates.2(a) All necessary holes, grooves, moldings, edge thikning

and cutting in all types of flooring, cladding, steps,staircases etc., shall be done without any additional cost. 2)Sand shall be used after sieving as per item requirement.

TOTAL:- 11,483,726.00

13


Unit Amount

Civil

9.00 DOORS & WINDOWS9.01 Providing, making & fixing in position of Ghana or equivelent

second class teak wood for doors & windows frames ( Size offrame 108mmx83mm and up to 2.5 m heigh) with makingboth side 12mm rebate or as per design including all labour,materials & also including fixing of 40 x 5mm flat iron holdfast 12cm long with 10mm dia bolt,nut and wooden plugsand embedding in cement concrete block 30 x 10 x 15 cm1:2:4 mix and one Coat of wood primer and three coats ofenamel paint of approved shade and made complete asdirected by Clerk-of-Work. For all lift, levels and leads.

(a) 376.00 SMt For width of frame up to 1.15m. 1,525.00 573,400.00(b) 38.00 SMt For width of frame 1.20m to 1.60m. 1,050.00 39,900.00

9.01(b) Providing, making & fixing in position of Ghana or equivelentsecond class teak wood for doors & windows frames ( Size offrame 142mmx83mm and up to 2.5m heigh) with makingboth side 12mm rebate or as per design including all labour,materials & also including fixing of 40 x 5mm flat iron holdfast 12cm long with 10mm dia bolt,nut and wooden plugsand embedding in cement concrete block 30 x 10 x 15 cm1:2:4 mix and one Coat of wood primer and three coats ofenamel paint of approved shade and made complete asdirected by Clerk-of-Work. For all lift, levels and leads.

(a) 20.00 SMt For width of frame 1.6m to 3.0m 1,020.00 20,400.009.02 R.O SMt Providing & making & fixing of upvc or pvc door with frame (

sintex makesection no 144 or as per manufacturer's broswerfor door frame and door) glossy or mate finish any colourapproved by architects or consultant ,fix with heavy duty butthinges with necessary screwsincluding approved makefasteners & fixures ( like handles, tower bolt,door stoperUPVC or Aluminum make).Design approved by architect/consultant or as per directed by Clerck - of - work etccomplete for all lift , level & any Height.

1,614.00

9.03 925.00 SMt Providing & fixing ISI water proof 35 mm thick flush door shutter ,solid core of block board construction with frame of 1st class hard wood with cross band and plywood face panels and fixing of 1mm thk approved laminates on both faces of shutter approved by architects or consultants of any colour with bonding agent including nailse, fevicoal, M.S. black Oxodised 125mx30mm( Heavy Duty) butt hinges with necessary screws including Brass fasteners & fixtures approved make( Like handles,brass tower bolt , brass door stopper /baby latch, brass screws etc) & Mortaise lock of approved make( Godrej or Equivalent) with four keys.Joinary bonding agent, nails, moulding, architrievs patti / border as per design approved by architect/ consultants or as per directed by Clerk - of - work etc complete for all lifts, level & any height.

2,450.00 2,266,250.00

9.04 930.00 SMt Aluminium two track window,fix glass window, openablewindow (Z section)& vent as per design including all labour,all material at any level, lift & leads.

2,505.00 2,329,650.00

14


Unit Amount

Civil

Note: All Aluminium Sections to be heavy duty as permanufacture's specifications ( Jindal Series-D Shutter section-25mm(1.5mm thk) Part-I for two track window & equivalentthickness for all other aluminium work or equivalent brandmake), Black powder coated, sliding Channels wherespecified to be with bearing for feather- touch operation.

All Glass to be opec 5mm thk, distortion- free,('Modi Float Glass or Saint gobain glass' make), All exposed edges of glass to be machined polished Rates to include all hardware and fittings like handle, .Bolts, Hinges ( Minimum 3- nos. per shutter),Locks,pivot etc as approved by architects as directed by Engineer-In-Charge.

9.05 22.00 Mt Providing decorative M.S. grill as per design made from flats,bars etc., including cutting welding etc., fixing & fastening inwindows complete as per architectural drawing. The rate alsoincludes providing of two coats of synthetic enamel paint over a coat of approved zink chromate primer as per directed byClerk-Of-Work for all Lifts,level,leads.

55,000.00 1,210,000.00

TOTAL:- 6,439,600.00

15


Unit Amount

Civil

10.00 PAINTING10.01 7542.00 SMt Providing and applying two coat of Anti-funges and Anti-

moss Acrylic co polymer based exterior paint includingproviding and apply one coat of primer recommended bypaint menufacturar on smooth finished or sand-facedsurfaces at all levels & heights. With two or more coats (up to finish) of approved make and shade on new work to give aneven shade. Rate includes cost of providing, and erecting allnecessary scaffolding,prepare & cleaning the wall surfece,brushes, removal of the same after completion of work,cleaning all surfaces like floor, Door - Window etc Completeas per directed by Clerk-Of-Work for all Lifts, level,leads.

87.00 656,154.00

10.02 28040.00 SMt Distempering (two coats) with oil bound washable Distemperof approved brand and manufacturers and required shed onwall surfaces to given an even shade over and including aprimary coat with alkali resistance primer of approved brandafter thoroughly brushing even and smooth. Rate to includecost of providing, and erecting all necessary scaffolding,prepare & cleaning the wall surface.(If required, acrylic puttyshall be used to getting even and smooth surface.) Brushes,removal of the same after completion of work, cleaning allsurfaces like floor, Door - Window etc Complete as perdirected by Clerk-Of-Work for all Lifts, level, leads.

37.80 1,059,912.00

10.03 25.00 SMt Providing and applying synthetic enamel paint, at all heights,of required shade and approved make on wood work / steelwork including the preparation of surface for painting,applying primer & putty, of approved make with two or morecoats of approved first quality synthetic enamel paint asdirected. all lift,level,leads.

62.00 1,550.00

10.04 2870.00 SMt Providing and appling 3 coats of white wash to all surfacesas per Detailed specifications including necessaryscaffolding,scrapping etc. complete.if additional coats arerequired to obtain uniform finish the same shall be carried out at no extra cost. as directed by the clerk- of- work.at alllift,levels and leads.

3.35 9,614.50

TOTAL:- 1,727,230.50

16


Unit Amount

Civil

11.00 MISCELLANEOUS 11.01 15.00 Cmt Lightweight aggregate filling of chem. Waste. in any sunken

area for all labours and Materials for all levels Complete asper directed by Clerk-Of-Work for all Lifts,level, leads.

400.00 6,000.00

11.02 6.00 Nos Providing and fixing hydarulic door closer of approved sizeand made such as EVERITE / HYPER / EGL/GODREG orequivalent as directed.all lift,level and leads.

1,056.00 6,336.00

11.03 6.00 Nos Providing and fixing Hydraulic floor springs ofEVERITE/GODREG/OZONEor equivalent as and wheredirected.all lift,level and leads.

3,100.00 18,600.00

11.04 200.00 Kg Cement base Grouting : Injecting cement with conbex 100/Intraplast N-200 or equivalent make grout into concrete/brick/ stone masonary work by suitable gun/pump at requiredpressures by providing drilling and inserting 12mm diaaluminium grouting multi perforated nipple up to 30mm to40mm depth using "M" seal around the nipple, cutting ofnipple after curing, cleaning including opening and sealingthe crack with cement mortar and conbex 100 or Equivalentnon shrinkage materials etc complete (This item is to bepaid on actual consumption of cement in absorption ofmember and non shrinkage materials) Complete as perdirected by Clerk-Of-Work for all Lifts,level and leads.

50.00 10,000.00

11.05 100.00 Kg Epoxy Grouting :Injecting epoxy grout (low viscosity epoxy for concrete /stone joint and grouting grade epoxy for stonearches) by suitable gun (Pump at required pressure byproviding, drilling and inserting 6mm to 10mm dia PVC /brass grouting multi perforated nipples upto 30mm to 40mmdepth using epoxy putty around the nipple cutting of nipplesafter curing, cleaning including opening and sealing the crackwith polymer mortar etc complete (This item shall be paid onactual consumption of epoxy used in K.G ) as per directed byClerk-Of-Work for all Lifts,level and leads.

750.00 75,000.00

11.06 20.00 Cum Dismantling brick masonary walls and partitions, plastered orunplastered as per instructions including finishing the brokensurface to match with the surrounding, removing the debrisas directed. cutting the reinforcements if any etc., completeas directed. The dismantling of stone, masonary, BBCC,PCC and stone pitching would be measured under this itemand finaly carting away remains debris from the site etc.complete as per directed by Clerk-Of-Work for all lifts, leveland leads.

197.15 3,943.00

11.07 1.80 Cum Dismantling the RCC beams, slabs, lintels, columns, pardiwalls, platform etc., including finishing the broken surface tomatch with the surrounding, removing the debris within site,including cutting the reinforcement if any etc. and finalycarting away remains debris from the site etc. complete asdirected by Clerk-Of-Work for all lift,level and leads.

313.25 563.85

17


Unit Amount

Civil

11.08 910.00 Kgs Providing decorative M.S. Railing in Stairs and Balcony asper design made from flats, bars etc., including cuttingwelding etc., fixing & fastening, complete as per architecturaldrawing. The rate also includes providing of two coats ofsynthetic enamel paint over a coat of approved zink chromate primer as directed by the clerk- of- work. at all lift, levels andleads.

55.00 50,050.00

11.09 265.00 SMt Providing & Fixing of G.I. Chainlink fancing as per designmade from M.S. box channel(75mm x 75mm) at 2.5 Mt c/cand grouted in compound wall and 8 gauge G.I.chainlink jaliincluding cutting welding etc., fixing & fastening abovecompound wall & copping comlete as per architecturaldrawing.The includes providing of two coats of syntheticenamel paint over a coat of approved zink chromate primeras specification as directed by clerck-of work.

1,022.00 270,830.00

11.10 20.00 Nos Providing & Fixing CI (Footrest )Step in concrete in underground tank, Sump , Over ead Tank etc including all labour,Materials, Scaffolding etc Complete as directed by clerk-of-work.at all, lift, level and leads.

292.00 5,840.00

11.11 Providing,making,fixing & anchoring of reinforcing bars ordowels or rebar including drilling the holes, fixing the barsand grout the bar with Hilty Hit -HY150 grouting chemical,all labours,all tools &plants, necessary scaffolding, etc butexcluding the reinforcement steel completed for all lead & liftas per directed by clerk of works or Structural consultants orArchitect. For all lift, levels and Leads.

200.00 No. a. 8mm & 10mm Dia 150.00 30,000.00200.00 No. b. 12mmdia 250.00 50,000.00100.00 No. c. 16mm dia 350.00 35,000.0050.00 No. d.20mm, 25mm, 32mm Dia 650.00 32,500.00

11.12 Welding of Bar :Connecting & Making reinforcement barwith electric arc welding for overlap / Splices ofreinforcement including all labour, all material with weldingroad( Advani welding rod), nessassary scaffolding & as perstructural deatils & location etc complete as directed byEngineer-In-Charge for all floor,leads & lift. Reinforcementbar Welding shall be as per IS:2751 and IS : 9417.Test shallbe made to prove that the joints are of full strength of barconnected.The test shall be carried out by contractor withoutextra payment.The welding of reinforcement shall be allowedonly prior permission of Structural engineer & test as perstructural engineer instruction.

5000.00 No. a.20mm dia 31.00 155,000.005000.00 No. b.25mm dia 43.00 215,000.0012.00 No. c.32mm dia 55.00 660.00

18


Unit Amount

Civil

11.13 65.00 SMt Providing & fixing mirror with Ghana teak wood frame ( size1200 mm x 450 mm )( section 25mm x 40mm) with 4mmthick hardboard backside for support for 5mm thick miroorglass (Modi or saint gobain or equivalent). Rate also includeone coat of wooden primor and two coat of synthetik enamelpaint (up to finish) as per Architect details drawing asdirected by Clerk-of-work / Architect for all leves & allleads..The rate shall include necessary hardware, all labourand all materials.

1,618.00 105,170.00

TOTAL:- 1,070,492.85

19

BILL OF QUANTITY FOR PROPOSED CONSTRUCTION OF NURSING SCHOOL & HOSTEL BUILDING AT SHETH V.S. HOSPITAL CAMPUS AT ELLISBRIDGE, AHMEDABAD.

SUMMARY (Water Supply, Drainage and Sanitary)

SR. NO. ITEM DESCRIPTION TOTAL AMOUNT1.0 SANITARY FIXTURES & FITTINGS 1,730,105.00

2.0 HOT & COLD WATER SUPPLY: 1,001,377.00

3.0 INTERNAL AND EXTERNAL DRAINAGE 1,188,390.00

4.0 MANHOLE COVERS 5,760.00

5.0 STONE WARE PIPES & FITTINGS 116,899.00

6.0 EARTHWORK & CIVIL WORK 573,741.60

7.0 PUMPS, PLANT & MACHINERY 2,077,950.00

GRAND TOTAL 6,694,222.60


Unit Amount

1.00 SANITARY FIXTURES & FITTINGS1.01 EWC

140 No. Providing & fixing Wall-mounted European Closet Suite P-Trap (White/Light Coloured) with Dual Flush Tank , PVC panconnector, seat & lid (heavy duty) including C.I. Brackets,C.P. brass hinges, All Internal fittings complete with rubberbuffers, C.P. nuts, bolts, ChaKi, etc making holes in walls &floors, & finishing for ready to use.The rate includes Providing& fixing 15mm Angle Valve as per product detail with braidedhose pipe as per product detail, including cutting and makinggood the wall where required.( Ewc wall hung-p :Cera.(white/light coloured) Classic no.2037 or equivalent, Chairbracket : Cera no:2434 or equivalent brand make, rag bolts,Dual Flush Cistern : Cera ( white/light coloured) no: 2608 orequivalent, Angle cock: Jacquar no 051 continental orequivalent, Braided hose: Jaquar-Allied-803B-CP)

5,280.00 739,200.00

1.02 HEALTH FAUCET140 No. Providing & fixing of Hand Jet Shower (Health Faucet) with

1mtr Flexible PVC Tube, wall hook, and 2-Way Bib Cock(Make: Hand shower : Cera no: CG205, 2-way Bib cock: Cerano: CP113)

1,255.00 175,700.00

1.03 UNDER COUNTER WASH BASIN133 No. Providing & fixing of White/Light Coloured Vitreous China

Under Counter Oval type Wash Basin 550mm x 450mm asper product detail, including specially fabricated M.S. / C.I.brackets painted white, Waste Coupling as per product detail,Bottle Trap & Pipe to wall as per product detail, and rubberadopter for waste connection, complete with Cold WaterSwan Neck Taps as per product detail. Fitting includingcutting & making good the walls wherever required.The ratealso includes Providing & fixing 15mm C.P. brass angle valvewith C.P. copper connecting pipe 375 mm long and nuts,washer and brass flange complete, including cutting andmaking good the wall where required. The scope includes thefollowing fixtures. (Make: Wash basin: Cera no.1023(white/coloured) or equivalent, Waste Coupling: Cerano.CM203 ( half thread) or equivelant, Bottle Trape: CeraCM104A Economy Model 30mm with 230 mm horizontal &150mm vertical connection pipes, Swan neck tap with roundspout for wash basin:-Cera CC222. Or equivelant, Angle valve: Jaquar - Continental - 053 - CP or equivelant, Braided hose :

3045.00 404,985.00

1.04 STAINLESS STEEL SINKS4 No. Providing & fixing stainless steel sink, R.S. or C.I. Painted

brackets painted, 40mm dia. C.P. waste, C.P. brass chainand rubber plug, strainer with necessary C.P. brass unionscomplete including painting the fittings and cutting andmaking good the walls wherever required, with CC sink cockwith raised "J" shaped swinging spout. The scope includesthe following fixtures.( Make: Nirali-Grace-plain-510mm x432mm bowl, Swan neck tap with round for wash basin:- CeraCC 222 or equivalent)

5,200.00 20,800.00

1.05 URINALS

Water Supply, Drainage and Sanitary

1


Unit Amount


26 No. Providing & fixing White/Light Coloured Vitreous China LargeUrinal 590mm x 375mm x 390mm as per product detail withFlushing System as per product detail, with C.I. hangers,Bottle Trap, Prassmatics angular cock, Waste Coupling,including cutting and making good the walls and floorswherever required.( Make: Urinal: Cera no: 5004 orequivalent, Prassmatics angular cock : Jaquar 007 orequivalent, Waste coupling : Cera no. CM203 ( half thread) orequivalent, Bottle trap: Jaquar no 773 or equivalent.)

3,770.00 98,020.00

1.06 TOWEL RING140 No. Providing & fixing of Towel Rings as per product detail (

Make: Towel ring : Cera No CA102 or Equivalent) 408.00 57,120.00

1.07 WALL MIXTURE WITH OVER HEAD SHOWER104 No. Providing & fixing of Open Wall Hot & Cold Mixture , with all

accessories to complete the item.( Wall Mixture : Cera CP112 or equivalent, Over head shower : Cera CP 140 orequivalent)

1,970.00 204,880.00

1.08 SOAP DISH140 No. Providing & Fixing S.S type soap dish of approved by

consultant/Architect, including civil cutting & backfilling as well as making good the walls.

210.00 29,400.00

TOTAL CARRIED OVER TO SUMMARY: 1,730,105.00

2


Unit Amount


2.00 HOT & COLD WATER SUPPLY:For Internal Toilet Domestic and Flushing water supplypipe work

2.01 Providing & Fixing (IS 15450 2004) Polyethelene-Aluminium-polyethelene (PE-AL-PE) Composite Pressure Pipes U.V.stabilized with carbon black having thermal stability for Hotand Cold water Supply, capable to withstand temperature upto 80 Deg. C. including all Composite glassfield polypropylenefittings, pipes with all necessary (Female thread elbow & Pointfittings Only Brass thread) fittings such at tees, elbows,reducers, male thread connectors, female thread connectors,plug, etc. including making Jari and refilling the walls, floors,and RCC work etc. Cutting chases, excavation, backfilling,fixing with clamps, drilling holes in walls, slabs, hydraulictesting .and filling the same with cement mortar 1 : 4 ( 1cement : 4 coarse sand) as required, after housing the pipes.(Internal Plumbing)

a 150 Rmt 12 - 16mm (1/2" dia.) 224.00 33,600.00b 930 Rmt 16 - 20mm (3/4" dia.) 260.00 241,800.00c 475 Rmt 20 - 25 mm (1" dia.) 319.00 151,525.00d 50 Rmt 25 - 32 mm (1.1/4" dia.) 413.00 20,650.00e 50 Rmt 40 mm dia (1.1/2" dia.) 391.00 19,550.00

2.02 SLUICE VALVESupply, installation, testing and commissioning of gunmetal,male or female threaded isolation control valve (Sluice Valve),confirming to IS 778, PN 10, with necessary specials, unions,nipple etc., to complete the job. (FOR Internal Domestic &Flushing Water Supply work) ( Make: RB or ZOLOTO or VBor AUDCO or specified)

a 10 No. 50 mm dia NS 1,744.00 17,440.00b 15 No. 40 mm dia 601.00 9,015.00c 150 No. 32mm dia. 407.00 61,050.00d 6 No. 25 mm dia 335.00 2,010.00

2.03 WATER SUPPLY PIPESProviding, laying and fixing heavy duty (To ASTMD1785)ASTM CPVC SDR-13.5 pipes & Fittings with solventweld socket joints and necessary (female Elbow fittings brassthread) such as sockets, back nuts, elbows, bends, tees,reducers, enlargers, plugs, clamps, Transition Bushing etc.including necessary excavation, backfilling, fixing with clamps, drilling holes in walls, slabs, hydraulic testing . (For TerraceExternal water supply pipe to O.H.Tank to Toilet main watersupply pipe) (Make: RB or ZOLOTO or VB or AUDCO orspecified.)

a 80 Rmt 25mm 90.00 7,200.00b 125 Rmt 32mm 139.00 17,375.00c 325 Rmt 40mm 333.00 108,225.00d 600 Rmt 50mm 382.50 229,500.00

2.04 ISOLATION CONTROL VALVESupply, installation, testing and commissioning of gunmetal,male or female threaded isolation control valve (WheelValve), confirming to IS 778, PN 10, with necessary specials,unions, nipple etc., to complete the job. (For External work)

a 10 No. 25 mm dia 335.00 3,350.00

3


Unit Amount


b 6 No. 32 mm dia. 407.00 2,442.00c 5 No. 40 mm dia 601.00 3,005.00d 30 No. 50 mm dia 1,744.00 52,320.00

2.05 INSULATIONproviding and fixing 6 mm thick thermal insulation usingmagnesia rope insulation over pipes in wall chase and fillingthe wall chase as per manufacture's specifications for hotwater insulation. (External & Internal Work) NS

a 5 Rmt 15mm dia 36.00 180.00b 425 Rmt 20mm dia. 49.00 20,825.00c 5 Rmt 25mm dia. 63.00 315.00


4


Unit Amount


3.00 INTERNAL AND EXTERNAL DRAINAGE3.01 CHILLY COCKROACH TRAP

272 No. Providing and fixing C.P. hinged grating 6mm thick rimincluding setting in floor with cement mortar 1:3 (1 partCement: 3 parts Coarse Sand) 156mm x 156mm, ChillyCockroach Trap : CCT-S-156 Square.

1,245.00 338,640.00

3.02 SOIL, WASTE, VENT & RAIN WATER PIPES & FITTINGS

Providing fixing, testing and commissioning of SWR PVCPIPE TYPE-A(4 kg. cm. sq.) ring fit pipe conforming toIS:4985 including all fittings such as bends, junctions,inspection doors, offsets, cowl, access pieces/plugs etc.jointing with Solvent cement (lubricant) with O-Ring jointsincluding cutting holes in walls and making good the same.(SOIL, WASTE,: INTERNAL TOILET WORK)

a 20 Rmt 160 mm dia. 550.00 11,000.00b 2005 Rmt 110 mm dia. 350.00 701,750.00c 500 Rmt 75 mm dia. 230.00 115,000.00

3.03 Providing and fixing PVC Pipe ISI marked brand as perIS:4985 (6 kg.) complete with PVC Fittings & clamps & hingesincluding cutting and making good the walls & ceiling forwaste pipes, connections & as directed by the Engineer-in-Charge ( Urinal and Basin area wash out pipe )

a 30 Rmt 50 mm nominal bore 150.00 4,500.00b 140 Rmt 40mm nominal bore 125.00 17,500.00


5


Unit Amount


4.00 MANHOLE COVERS4.01 10 No. Providing and fixing 600mm X 450mm cast iron water tank

cover C.I. seat and lockable arrangement complete in allrespects (Total weight of cover & frame to be not less than35 Kgs.).(Under ground Water Tank Total Cover)

576.00 5,760.00

TOTAL CARRIED OVER TO SUMMARY: 5,760.00

6


Unit Amount


5.00 STONE WARE PIPES & FITTINGS5.01 Providing and supplying ISI marked only Standard length

Stoneware pipes in standard lengths, IS - 651 /1989) 2.including Lowering, laying and jointing Stone Ware pipes offollowing diameters with cement joints in C. M. 1:1 proportionin proper position, grade and alignment as directed byEngineer-in-charge including necessary excavation, Jointingmaterial, labour, giving hydraulic testing etc. complete.

a 175 Rmt 150mm dia (For Sewage Disposal) 143.00 25,025.00

b 200 Rmt 230mm dia (For Sewage Disposal)NS 325.00 65,000.005.02 Providing and fixing square-mouth S.W. gully trap grade ‘A’

complete with grating, brick masonry chamber with water tightFRC cover with frame of 300 x300 mm size (inside) theweight of cover shall not be less than 2 kg and frame shallnot be less than 2 kg, with F.P.S. bricks class 75 designated.

a 5 No. 100mm x 100mm 702.00 3,510.00b 33 No. 150 x 100 mm size P type 708.00 23,364.00


7


Unit Amount


6.00 EARTHWORK & CIVIL WORK6.01 Excavations for all Under Ground Water Supply, Drainage,

and Rain Water Disposal pipelines in trench and pit in openareas where disposal of surplus earth is done along thealignment, including trimming and dressing sides, leveling ofbeds of trenches to correct grades, cutting joint holes, refilling,consolidation, including necessary timbering, dewatering ofdrain water, diversion of traffic, night signals, fixing cautionboards, watching, fencing etc. Rate includes conveyancecharges of remaining surplus earth from site as directed withthe any lead in the city as directed by Clerk-of-Work.

a 350 Cmt Upto 1.5m depth in all classes of soil. 106.50 37,275.00b 130 Cmt From 1.5m to 3.0m depth in all classes of soil. 111.42 14,484.60

6.02 Constructing water tight brick masonry manholeincluding excavation, brick masonry with first class bricks incement mortar 1:4 (1 cement :4 coarse sand), R.C.C. top slabwith 1:2:4 mix (1 cement : 2 coarse sand :4 graded stoneaggregate 20 mm nominal size) and the steel as per thedetails given in the civil/structural specifications. Foundationconcrete 150 mm thick 1:4:8 (1 cement :4 coarse sand :8graded stone aggregate 40 mm nominal size), insideplastering 15 mm thick with cement plaster 1:3 (1 cement :3coarse sand) finished with a floating coat of neat cement andmaking channel in cement concrete 1:2:4 mix, (1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size)finished with floating coat of neat cement plaster and finishedas per NBC standards, backfilling, compaction, dewatering,water proofing, P & F of 560mm dia FRC ManholeCover(MD) and disposal of surplus earthl away from the site.

a 7 No. 900MM x 800MM x 1500MM 10,313.00 72,191.00

b 10 No. 1200MM x 900MM x 2240 MM 11,869.00 118,690.00

6.03 Constructing water tight brick masonry chamber including forunderground C.I. Inspection chamber & bed with brickshaving crushing strength not less than 35 Kg/Cm2 in C.M. 1:5with FRC chamber cover ( 455mm X 610mm internal cleardim.) as per chamber dimensions :( R.C.C top slab with 1:2:4mix ( 1cement : 2 coarse sand : 4 graded stone aggregate20mm size) foundation concrete 1:5:10 inside plaster 15mmthk with cement mortar 1:3 finished smooth with a floatingcoat of neat cement on walls and bed concrete etc. Complete.

a 20 No. 500mm x 700mm x 900mm 1,852.00 37,040.00

b 2 500mm x 850mm x 900mm 4,088.00 8,176.00

6.04

170 Cmt

Providing and laying brick bat concrete 1:5:10 (1 cement : 5fine sand : 10 graded brick aggregates 40 mm. Nominal size)bedding for stone ware pipes of following internal diameterswith necessary form work and curing complete.

1,106.00 188,020.00

6.05 Rain water disposable pipes

8


Unit Amount


Providing and laying non-pressure NP2 class R.C.C. pipeswith collars jointed with stiff mixture of cement mortar in theproportion of 1:2 (1 cement : 2 fine sand) including testing ofjoints etc. complete with the necessary excavation, laying,refilling, compaction, dewatering, curing, testing, and disposalof any earth/soil from the site.

a 100.00 Rmt 300mm dia 448.00 44,800.006.06 Rain Water Manhole

5 No. Constructing water tight brick masonry manholeincluding excavation, brick masonry with first class bricks incement mortar 1:4 (1 cement :4 coarse sand), R.C.C. top slabwith 1:2:4 mix (1 cement : 2 coarse sand :4 graded stoneaggregate 20 mm nominal size) and the steel as per thedetails given in the civil/structural specifications. Foundationconcrete 150 mm thick 1:4:8 (1 cement :4 coarse sand :8graded stone aggregate 40 mm nominal size), insideplastering 12 mm thick with cement plaster 1:3 (1 cement :3coarse sand) finished with a floating coat of neat cement andmaking channel in cement concrete 1:2:4 mix, (1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size)finished with floating coat of neat cement plaster and finishedas per NBC standards, backfilling, compaction, dewatering,water proofing, P & F of 560mm dia FRC ManholeCover(MD) and disposal of surplus earthl away from thesite.1200MM x 900MM x 1500 MM

10,313.00 51,565.00

6.07 2 No. Providing and fixing S.W. intercepting trap 230 mm dia inmanholes with stiff mixture of cement mortar 1:1 ( 1 cement :1 fine sand) including testing of joints etc. Complete

750.00 1,500.00


9


Unit Amount


7.00 PUMPS, PLANT & MACHINERY7.01 1 No. Supplying, installing, testing and commissioning of

centrifugal submersible pumps with S.S. casing, Bronzeimpeller, SS Shaft and driven by 415 V AC, 3 phase, 50HZ.,motor running at 2900 rpm speed and shall be supplied withall accessories viz., strainer, base plate, coupling, lift hook,chain, starter panel, cabling up to panel, earthing,and deliveryconnection pipes & valves etc., complete. VerticalSubmersible Pumps , MOC SS 304.(U.G.Tank To All O.H.Tank) Capacity = 10 Cu.Mtr/ Hr., Head = 35 Mtrs. ( Make:GRUNDFOS NO.SP-8A-12 2.2kW, 3HP, 2" OUTLET)

43,450.00 43,450.00

7.02 1 No. Supplying, installing, testing and commissioning ofcentrifugal submersible monoset pumps with S.S. casing,Bronze impeller, SS Shaft and driven by 415 V AC, 3 phase,50HZ., motor running at 2900 rpm speed and shall besupplied with all accessories viz., strainer, base plate,coupling, lift hook, chain, starter panel, cabling up to panel,earthing,and delivery connection pipes & valves etc.,complete. Vertical Submersible Pumps , MOC SS304.(U.G.Tank Raw Water Tank To Softener Plant) Capacity= 10 Cu.Mtr/Hr., Head = 30 Mtrs. ( Make: GRUNDFOS NO.SP-8A-10 1.5kW, 2.5HP, 2" OUTLET)

38,800.00 38,800.00

7.03 1 No. Supplying, installing, testing and commissioning ofcentrifugal submersible pumps with S.S. casing, Bronzeimpeller, SS Shaft and driven by 415 V AC, 3 phase, 50HZ.,motor running at 2900 rpm speed and shall be supplied withall accessories viz., strainer, base plate, coupling, lift hook,chain, starter panel, cabling up to panel, earthing,and deliveryconnection pipes & valves etc., complete. Dewatering Pump ,MOC SS 304.(Basement Rain water Drain Pump) Capacity =5Cu. Mtr / Hr.,Head = 10 Mtrs.) ( Make: GRUNDFOS NO. SP-5A-4 0.37kW, 0.75HP, 1.5" OUTLET)

26,800.00 26,800.00

7.04 SOLAR WATER HEATER SYSTEM1 No. Supplying, installing, testing and commissioing of force flow

type( pumped) with D.T.C controller( 4 nos.) water heatingsystem (BPC System)of total capacity of 8000 LPD withElectrical back-up, with S.S. tank( P.U. paint coating insulated& aluminum cladding hot water storage tank with stand) & ISI -Solchome make Cooper fine & tubes collectors of 48 Nos.(Copper-fine & tubes dully nickel selectively coated & fittedalu.section channel dully powder coated, 3 no. of Circulatingpump, with Auxilary Water Heating System ( E.B) containElactric heater capacity:9k Whr.( 3 x 3k Whr.Escort make),Circulating pump 0.5 hp.,Digital time clock controller.The ratealso includes internal piping(i.e. solar tank to collectors &collectors to solar tank) and external piping( cold water tank tosolar tank & solar tank to auxiliary heating to hot water lineconnecting point) etc.completed as per directed and withsatisfaction of site incharge.( Make: Urmi solar heater or Solaheart system )

1351400.00 1,351,400.00

7.05 R.O. SYSTEM

10


Unit Amount


10 No. Supply, installation, testing and commissioning of LocalizedR.O.. system consisting of R.O. membrane, PP cartridgefilter, Activated Carbon filter, R.O. multistage booster pump ,drain & back wash arrangement & inlet, outlet & overflowconnection with water level sensor, Rejection of TDS 90%Approx, Electric Supply 220v 50hzAC, External Pre-FilterBowl, Convenient & Elegant faucet etc. Input water hardness :as per water analysis, Output water quality : Potable water.Capacity 25 Ltr/ hr.

26,750.00 267,500.00

7.06 WATER COOLER10 No. Supply, installation, testing & commissioning of localized S.S.

Storage water Cooler system with all piping & fitting valves,with necessary all Fittings, etc complete. Capacity : 80 ltr.

35,000.00 350,000.00


11


SHETH V.S. HOSPITAL CAMPUS AT PALDI. AHMEDABAD.

S U M M A R Y (FIREFIGHTING)


A EXTERNAL FIRE WORK

1 FIRE PUMPS AND ACCESSORIES 841,950.00

2 FIRE HYDRANT / WET RISER SYSTEM 894,750.00

1,736,700.00

B INTERNAL FIRE WORK

3 FIRE HYDRANT / WET RISER SYSTEM 739,805.00

4 PORTABLE FIRE EXTINGUISHERS 732,620.00

5 AUTOMATIC SPRINKLER SYSTEM 431,560.00

TOTAL FOR FIREFIGHTING WORK 3,640,685.00

Sr. No. Quantity Unit Description of Item Rate per Unit Amount

Notes :1) For more detailed description of any material or item contained in the BOQ, please refer volume-II general technical specification. If the detailed specs for a particular item is not contained in the Part-II technical bid, the description given in the BOQ shall have to be referred.2) All items mentioned in the tender shall be executed as per the instruction and direction of Engineer-in-charge.

A) EXTERNAL FIRE FIGHTING WORK:1 FIRE PUMPS AND ACCESSORIES

1.01

Supply, installation, testing and commissioning of fireauthority approved electrical driven fire pump (As perCPWD specifications part V - 2006 for fire fightingworks and its up-to-date amendments) suitable forautomatic / manual operation consisting of thefollowing: (Location : Plant room)

a End suction type fire pump with bronze impeller withC.I. Body, Grade F.G. 200 to IS:210. Casing & shallbe designed for 1.5 times of working pressure,capable of delivering 2280 LPM against total head of70 mtrs while running at 2900 rpm to ensure aminimum pressure of 3.5 kg per sq.cm at the farthesthydrant complete having tail pieces for properconnection to suction and delivery line, having aname plate indicated suction, delivery, head,discharge, stages, RPM and direction of rotation

B Squirrel cage, TEFC inductions motor suitable for415 +/- 10% V, 3 phase 50 Hz AC supply and ofsuitable H.P. for the above pump running at 1500RPM with IP 55 protection for enclosure, horizontalfoot mounted type with class-F insulation, confirmingto IS:325.

c Common bed plate of requisite strengthmanufactured out of M.S. channels of suitable size ofISMC including with suitable Nos. og cushy footmounting below ISMC channel ands with suitableC.C. foundation etc. complete as required.

d Suitable mechanical seal with mounting arrangement

e Tire type coupling and coupling guard for directcoupling of pump and motor.

f Foot valve - 200 mm on suction sideg 1 SET Drain Pipe with valve (25 dia) 245000 245000.00

1.02 Supplying, installing, testing and commissioning offire authority approved electrical driven jockey pump(As per TAC/ specifications ) suitable forautomatic/manual operation consisting of followingcomplete in all respect as required.: (location : pumproom).

Firefighting

1


Firefighting

a Monobloc / End suction horizontal mountedcentrifugal pump running at 2900 RPM capable ofdelivering 180 LPM (10.8 m3/Hr. ) @ 70 mtrs headcomplete with tail pieces for proper connections tosuction and delivery line.

b Suitable cement concrete foundation duly plasteredwith anti vibration pads.

c Squirrel cage, TEFC inductions motor suitable for415 ±10% V, 3 Ph. 50 Hz AC supply & of suitableH.P. for the above pump running at 2900 RPM (asper specifications).

d Bed Plate of requisite strength manufactured out ofM.S. channel of suitable size of ISMC, Foundationbolt , including with suitable C.C. foundation.

e Suitable mechanical seal and No.1 pressure gaugeon the pump delivery line with isolation cock.

f Tire type coupling and coupling guard for directcoupling of motor and pump.

g 1 SET Drain Pipe with valve (25 dia) 98000 98000.001.03 MCC for Fire Pumps :

Design, manufacture, supply ,installation, testing andcommissioning of following MCC panels suitable for415V, 3 phase, 4 wire, 50 Hz power distributionsystem. the panel should be indoor, free standing,floor mounting, sheet metal clad, Cubicle, dead front,dust and vermin proof confirming to IP-55 enclosure,compartmentalized design fabricated out of 14 SWGsheet steel complete with Al busbars, separate earthbus bar to be provided through out the length of thepanel. The incoming and outgoing feeders shall beaccommodated in a modular multitier arrangement,adequate size cable alley, painting, earthingnumbering, damper plate etc. as required as perspecifications and drawings. The panel shallwithstand a fault level of 25 KA as per Single L ineDiagram.(Cost of PLC and related wiring forswitching on and switching off the pumps as per therequirement)

NOTE :a Separate neutral link to be provided wherever TP

MCCB are used.b All MCCB shall have breaking capacity of 25 KA

unless otherwise specified.c Necessary cabling, wiring, earthing from panel to

individual equipment shall be included in the quotedprice.

d following provisions to be made in the fire panel:e Audio visual alarm and indications having

disconnect/reset facilities with a range of 1/2 Km.The indication shall come on when electrical drivenpump set fails to start on pressure drop or whenthere is

f Facility for more selections i.e auto or manual.g Protection failure and control cabling.

2


Firefighting

h 1 SET Interlocking of pressure switch with pumps 160000 160000.001.04 25 Rmt Providing 32mm x 6mm G.I. Strip on 40mm dia G.I

pipe.225 5625.00

1.05 30 Rmt Providing 25mm x 6mm G.I. Strip on surface. 225 6750.001.06 30 Rmt Providing and fixing 8 SWG dia G.I. Wire on surface

/ recessed for loop earthing.120 3600.00

1.07 Supply, laying testing and commissioning of L.T.XLPE armored / unarmored cable confirming to IS :7098 Part - II with cable end termination as per thedescription given below:(With End Terminations)

a 15 Rmt 3.5 C x 150 Sq. MM. Al. XLPE ARM Cable [Incomercable to MCC]

1250 18750.00

b 20 Rmt 3 C x 95 Sq. MM. Al. XLPE ARM Cable [From panelto main Hydrant & sprinkler pumps]

530 10600.00

c 25 Rmt 3 C x 2.5 Sq. MM. Cu. XLPE ARM Cable [From panelto Jockey pumps ]

135 3375.00

1.08 1 JOB M.S. Priming tank with required overflow, inlet, outlet,vent & drain connections with required valves, etc.complete. The scope shall also include piping fromtank to each fire pumps

7750 7750.00

a Capacity : 1000 ltr.1.09 1 SET Supply, erection, testing and commissioning of giving

a discharge of 2280 LPM (171 M3/Hr.)@ 70mtr.head complete with adequate HP automaticdiesel engine driven pumpset with suitable speed,having the residential silencer system and otheraccessories like fuel tank, necessary cooling system,day oil storage tank as per detailed specification withcontrol panel comprising of electronic calibratedrelay starter, repeater relay push button switch formanual starting all as per the detailed specification.

282500 282500.00

a Horizontal type, multistage, centrifugal pump of castiron body and bronze impeller with stainless steelshaft, mechanical seal to ensure a minimumpressure of 3.5kg/sq.cm. at highest and farthest outlet at specified flow as per IS 1520.

b Suitable HP, 1500 RPM water cooled with radiator,diesel engine conforming to relevant BS & ISstandard complete with auto starting mechanism, 12volts/24 volts electric starting equipment, diesel tank,exhaust pipe extended up to 1mtr. Out side pumphouse duly insulated with 50mm. thick glass woolwith 1.0mm. thick aluminum sheet cladding,residential silencer, instruments and protection as per specification, stop solenoid for auto stop in the eventof fault with audio indications, painted with post officered color etc. as required.

c M.S. fabricated Common base plate, coupling,coupling guard, foundation bolts etc. as required.

d Suitable cement concrete foundation duly plasteredwith anti vibration pads.

1.00 TOTAL CARRIED OVER TO SUMMARY 841,950 NOTE :

3


Firefighting

a Necessary cabling, wiring, earthing from panel toindividual equipment shall be included in the quotedprice.

b following provisions to be made in the fire panel:c Audio visual alarm & indications having disconnect /

reset facilities with a range of 1/2 Km. The indicationshall come on when electrical driven pump set fails to start on pressure drop or when there is

d Facility for more selections i.e auto or manual.e Protection failure and control cabling.f Interlocking with Diesel engine pump / D.G. set

4


Firefighting

2.00 FIRE HYDRANT / WET RISER SYSTEM

2.01 Providing and laying MS.G.I. pipes to IS:1239(heavyclass) in trenches including all fittings like anchorfasteners, coupling bends elbows, tees etc weld onscrewed joints as required (external : Below Ground)

a 5 Rmt 150mm dia 1895 9475.00b 310 Rmt 100 mm dia 1410 437100.00c 10 Rmt 80 mm dia 1040 10400.00

2.02 Providing pipe protection for underground pipes fromcorrosion, paining pipe with PYPKOTE primer andcovered with PYPKOTE anticorrosive tape (4mmthick) as per specification.

a 5 Rmt 150 mm dia 295 1475.00b 310 Rmt 100mm dia 175 54250.00c 10 Rmt 80mm dia 160 1600.00

2.03 Providing and fixing short body double flanged castiron, butterfly valve complete with C.I. body, EPDMdisc seal, SS retainer ring, carbon steel disc & shaftand lever conforming to BS 5155 and suitable for PN16 including companion flanges.

a 3 Nos. 50mm dia (pump delivery & hydrant ring drain ) 3450 10350.00b 0 Nos. 65mm dia 3900 0.00c 1 Nos. 80mm dia (pump suction) 4400 4400.00d 2 Nos. 100mm dia 5650 11300.00e 2 Nos. 150mm dia (Pump Delivery, Hydrant risers) 6400 12800.00f 4 Nos. 200mm dia (Pump Suction, Delivery Headers) 9200 36800.00

2.04 Providing and fixing double flanged cast iron typeDual plate spring operated Check valve conformingto API 596/598 with CI body, CS plate & SS spring &suitable for 16 kg /cm2. with companion flanges

a 1 Nos. 50mm dia (Pump Delivery ) 3000 3000.00b 0 Nos. 80mm dia 4400 0.00c 0 Nos. 100mm dia 4950 0.00d 2 Nos. 150 mm dia (Pump Delivery & Hydrant Risers ) 6250 12500.00e 0 Nos. 200mm dia 10400 0.00

2.05 Providing and fixing cast iron pot-strainer suitable topipes of following diameter. (Including flanges).

a 1 Nos. 80mm dia 2000 2000.00b 2 Nos. 200mm dia 13500 27000.00

2.06 2 SET Providing and fixing Diaphragm pressure gauge withisolation cock suitable for a pressure range of 0-15Kg / Sqcm.

1500 3000.00

2.07 2 EACH Constructing masonry chamber 90 x 60 x 100 cm.Inside with 75 class designation brick work & shall beas per technical specifications.

3800 7600.00

a With local best quality bricks b Butterfly valve : Size : 200 mm, Specifications as per

Cl. 10.0

5


Firefighting

2.08 5 Nos. Providing, installing & testing M.S.G.I. Class 'C'stand pipe (of 2 mtrs. Length & 80mm dia) along with80 mm bend at top with flange, stand pipe shall be ofIS : 1239 Specification and TAC approved make.

2700 13500.00

2.09 5 Nos. Providing, fixing & testing of 63 mm dia obliquefemale instantaneous pattern Yard hydrant valveswith suitable size bolts, nuts, washers and gaskets.Landing valves shall be of IS : 5290 specification andTAC approved make.

4800 24000.00

2.10 5 Nos. Providing and fixing TAC approved fire hose cabinetto house stand post fire hydrant, including all otherrelated accessories fabricated from M.S. sheet offully welded construction having front door withlocking arrangement, partially glazed with 4 mm thickglass. Cabinet shall be painted with post office redcolor of size 900 x 600 x 250.

4000 20000.00

2.11 5 Nos. Providing & fixing 63 mm dia 7.5 mtr.x 2 nos. LongReinforced rubber lined hose pipe with 12.5 mm borenozzle including gunmetal male & femaleinstantaneous type coupling & branch pipe approvedby fire authority..

5200 26000.00

2.12 5 Nos. Supply, installation, testing & commissioning of FireAuthority approved Orifice Plate to limit the pressureat 5.5 kg/sq.cm

3650 18250.00

2.13 1 EACH Gun-metal Fire Brigade inlet connection forconnecting to fire hydrant ring main consisting of 2Nos. 63mm dia instantaneous type male couplingswith built-in check valves and 150mm dia, flangedoutlet complete with bolts, nuts, and rubber insertions as r

6900 6900.00

2.14 1 EACH Providing & fixing gunmetal fire brigade inletconnection to fire tank consisting of 4 nos. 63mm diainstantaneous type male couplings with 150mm diaflanged outlet complete with bolts, nuts and rubberinsertions as required and as per IS:904-1983

8500 8500.00

2.15 1 EACH Gunmetal Fire Brigade Suction Hose coupling (Drawout connection with Nut for female coupling as perIS:902 - 1974 complete with 100mm dia G.I Suctionpipe and 100mm dia foot valve (to be connected toStatic Tank).

8600 8600.00

2.16 5 EACH M.S. Cabinet (to enclose above draw-out connection)fabricated from 16g sheet with full front glass doorand locking arrangement duly painted with one coatof primer and two or more coats of synthetic enamelpaint of approved make and shade and suitablymounted on a raised masonry platform as required(Approx. 750 mm x 600mm x 450mm).

5500 27500.00

6


Firefighting

2.17 1 EACH Air cushion tank (air-vessel) 450mm dia x 2000mmhigh with dished top, made of minimum 10mm thickM.S. pipe/plate complete with 20mm dia. Stop valve,pressure gauge with brass stop cock, nipple teeselbows and all accessories as required.

10000 10000.00

2.18 Providing & fixing M.S.G.I.class 'C' diesel pumpexhaust pipe including all fittings, clamps / structuralsteel supports. The pipe shall be provided with onelayer 10 mm Thick asbestos rope insulation.

a 30 Rmt 150mm dia 2000 60000.002.19 2 Nos. Providing, fixing and testing of pressure switches 1425 2850.002.20 4 Nos. Providing, fixing, testing and commissioning of single

acting 25mm dia., air release valve with allaccessories.

1400 5600.00

2.21 50 Rmt Providing, Laying. Testing & Commissioning of 300mm dia RCC pipes of NP2 class with suitable collarsfilling the recess at joints of pipes with hemp dippedin hot bitumen or other suitable compound forchaulking of joint by jack, setting up of loose spac

360 18000.00

2 TOTAL CARRIED OVER TO SUMMARY 894,750

7


Firefighting

B INTERNAL FIRE FIGHTING WORK:

3.00 FIRE HYDRANT / WET RISER SYSTEM (INTERNAL)

3.01 Providing, fixing and testing black mild steel G.I.heavy duty (Class 'C' ) pipes (IS:1239) and fitting &Jointing like flanges, tees, elbows, bend junctions,reducers etc, clamp structural steel supports asrequired / directed at site including cutting andmaking all comp.

a 5 Rmt. 50mm dia & drain pipe 610.00 3050.00b 5 Rmt. 65 mm dia 785.00 3925.00c 12 Rmt. 80mm dia 1040.00 12480.00d 180 Rmt. 100mm dia (Terrace pipe + Riser) 1410.00 253800.00

3.02 17 Nos. Providing & fixing 63 mm dia 1 nos. x 15 mtr. LongReinforced rubber lined hose pipe with 20 mm borenozzle including gunmetal male & femaleinstantaneous type coupling & branch pipe approvedby fire authority..

2750.00 46750.00

3.03 17 Nos. Providing & fixing fire hydrant valve with doubleoutlet, gunmetal IS: 318 - LTB2, grade with 100mmN.B. flanged inlet, brass spindle, single 63mm femaleinstantaneous outlets, complete with gunmetal blankcaps chains, bearings IS :6290 mark and having T

9400.00 159800.00

3.04 17 SET Supplying and fixing TAC approved first aid hose reelincluding 30 meter long 20mm internal dia rubberlined hose reel tubing, 25 mm dia stop valve, shut offnozzle of sufficient length at one end of this hose andleaded tin, bronze rings and adapter to get in to theinstantaneous female coupling complete with suitabledrawn brackets, hub etc as required. the hose reelstrictly confirm to IS:884 - 1985

7450.00 126650.00

3.05 17 EACH M.S. Cabinet (to enclose above draw-out connection)fabricated from 16g sheet with full front glass doorand locking arrangement duly painted with one coatof primer and two or more coats of synthetic enamelpaint of approved make and shade and suitablymounted on a raised masonry platform as required(Approx. 750 mm x 600mm x 450mm).

4400.00 74800.00

3.06 Providing and fixing fire authority approved ballvalves with S.S. ball, PN 16 including all fittingsrequired.

a 20 Nos. 25mm dia 730.00 14600.003.07 Providing and fixing cast iron butterfly valves with

EPDM seat projection conforming to IS 5155, PN 16including pipe flanges complete in all respect.

a 1 Nos. 80mm dia 4400 4400.00b 7 Nos. 100 mm dia 5650.00 39550.00

3.00 TOTAL CARRIED OVER TO SUMMARY 739,805

8


Firefighting

4.00 PORTABLE FIRE EXTINGUISHERS4.01 101 EACH ABC (Powder Type) Fire Extinguisher Mild steel

Cylinders ISI marked TAC approved fitted withpressure indicating gauge, internal tube, squeezelever type valve fully charged with ABC powder(Mono Ammonium Phosphate pressured by Nitrogencomplete in all respects including wall suspensionbracket and confirming bracket and confirming to IS:14609-1999. - 5 Kg

1725.00 174,225

4.02 15 EACH ISI Marked portable fire extinguisher, water type 4.5kg CO2 type fire extinguishers complete in all respectincluding initial fill and wall suspension brackets &shall conform to IS 2878

1650.00 24,750

4.03 101 EACH ISI marked Fire Extinguisher, gas type Carbon -di-oxide type capacity 4.5 kgs flat base including valve,discharge hose of not less than 10mm dia,. 1m longcomplete in all respects including initial fill with CO2gas conforming to IS:2878/76 with wall suspensionbracket.

4850.00 489,850

4.04 38 Nos. Supplying and installing at approved locationapproved make fire buckets of 24 gauge galvanizedsteel sheet, standard 9 liter capacity and of roundbottom shape, painted white inside and black on thebottom, inscribed with letters '' FIRE'' in black andgold with fire sand.

325.00 12,350

4.05 19 Nos. Supply installation of fire bucket stand includingsheet metal (16 gauge) shade, platform andassociated civil works.

1655.00 31,445


9


Firefighting

5.00 AUTOMATIC SPRINKLER SYSTEM5.01 Providing and fixing of M.S. black steel medium duly

(Class 'c' pipes (IS:1239 Part - 1), and fitting likeflanges (MS steel flanges at every 15m length and asrequired tees, elbows, bends, junctions, Reducersetc; clamps/ structural steel supports asrequired/directed at site including cutting & makinggood the walls, RCC work etc. cutting chases & fillingthe came with cement conc. 1:3:6 including paintingthe exposed pipes with desired shade of enamel overa coat of primer. presently considered for all FloorArea).

a 450 Rmt. 25mm dia 350.00 157,500 b 90 Rmt. 32mm dia 415.00 37,350 c 45 Rmt. 40 mm dia 465.00 20,925 d 25 Rmt. 50mm dia 520.00 13,000 e 40 Rmt. 65mm dia 715.00 28,600 f 5 Rmt. 80mm dia 890.00 4,450

5.02 Providing and fixing fire authority approved ballvalves with S.S. ball including all fittings required.

a 1 Nos. 20mm dia 600.00 600 b 4 Nos. 25mm dia 750.00 3,000

5.03 Providing and fixing cast iron butterfly valves withEPDM seat projection tested to 10 Kg,/Cm2 pressureincluding pipe flanges complete in all respect.

a 1 Nos. 80mm dia 4400 4,400 b 3 Nos. 100 mm dia 5650 16,950

5.04 153 EACH 15mm dia, Quartzoid bulb type G.M. SprinklerChrome plated side wall extended range sprinklerhead set to operate at 68 (UL/FM/LPC/TAClisted/approved) complete with decorating plate(Rosette).

695 106,335

5.05 3 JOB Providing, fixing, testing and commissioning 50mmdiameter pipe with inspecting and testing assemblywith gunmetal isolation valve gunmetal sight glassbypass valve

4550 13,650

5.06 4 EACH Providing, fixing, testing and commissioning 50mmdiameter drain valve

2450 9,800

5.07 5 EACH Flow Switches for each sprinkler tapping from risercomplete with all accessories to provide indication inannuclator panel.

3000 15,000


10


SHETH V.S. HOSPITAL CAMPUS AT ELLISBIRDGE.AHMEDABAD.

S U M M A R Y( ELECTRICAL)


1 Internal Wiring 1,965,445.00

2 Light Fixtures and Fans 4,735,363.00

3 MV Switchgear 1,101,300.00

4 Distribution Boards 191,406.00

5 Cables & Termination 1,103,280.00

6 Earthing 160,749.00

7 Miscellaneous 522,236.00

8 Lft 3,895,000.00

TOTAL 13,674,779.00

Electrical workSRNO. Quantity Unit Description of Item Rate per Unit Amount

1 INTERNAL WIRING 1.01 Point Wiring1.1.1 Point wiring for Light / Bell with 2-1.0 sq.mm & earthwire

of 1.0 sq.mm (green) both are of ISI marked FR PVCinsulated multistrand copper wires, in existing pipe dulyerected complete with 6A Modular type switch / bell push &accessories and earth continuity of following type, erectedon PVC / Metallic box covered with appropriate front platemodules erected concealed in wall / ceiling.

1,171.00 PT. (A) Mini Modular 165.00 193,215.00 1.1.2 Point wiring for FAN with 2-1.0 sq.mm & earthwire of 1.0

sq.mm (green) both are of .ISI marked FR PVC insulatedmultistrand copper wires, in existing pipe duly erectedcomplete with 6A Modular type switch and hum free EME 5/6 step type electronic fan regulator with separately mountedand accessories with earth continuity of following typeerected on PVC / Metallic box covered with appropriate frontplate modules erected concealed in wall / ceiling.

432.00 PT. (A) Mini Modular 440.00 190,080.00 1.1.3 173.00 PT. Point wiring for FAN with 2-1.0 sq.mm & earthwire of 1.0

sq.mm (green) both are of .ISI marked FR PVC insulatedmultistrand copper wires, in existing pipe duly erectedcomplete with 6A Modular type switch with separatelymounted and accessories with earth continuity of followingtype erected on PVC / Metallic box covered with appropriatefront plate modules erected concealed in wall / ceiling.-(NSR)

297.00 51,381.00

1.1.4 Point wiring for Individual Plug with 2-1.0 sq.mm &earthwire of 1.0 sq.mm (green) both are of ISI marked FRPVC insulated multistrand copper wires, in existing pipe dulyerected complete with 6A Modular type switch & 6A 5pinPlug erected on PVC / Metallic box covered with appropriatefront plate modules erected concealed in wall / ceiling withfollowing type of accessories.

53.00 PT. (A) Mini Modular 225.00 11,925.00 1.1.5 Point wiring for Looped Plug with 6A Modular type switch & 5

pin socket erected on PVC / Metallic box covered withappropriate front plate modules erected concealed in wall /ceiling with following type accorries

607.00 PT. (A) Mini Modular 150.00 91,050.00 1.1.6 Point wiring for Two Way Controlled Light Point with 2-1.0

sq.mm & eirthwire of 1.0 sq.mm (green) both are of .ISImarked FR PVC insulated multistrand copper wires, inexisting pipe duly erected complete with 6A Modular typeswitches and following type of accessories erected on PVC /Metallic box covered with appropriate front plate moduleserected concealed in wall / ceiling.

110.00 PT. (A) Mini Modular 195.00 21,450.00 1.1.7 5.00 PT. 32 A 5 pin x 440 Volt (3 Phase) Metal clad socket outlet

point with 32 Amp. FPMCB.(NSR)3,103.00 15,515.00

1

Electrical work1.1.8 Providing following type of Modular Type Accessories

mounted on pvc / metallic box covered with appropriate frontplate modules erected with necessary connection.

(1) One No. SP 6 Amp or One No 5 pin plug 1,704.00 EA. Cat. II 140.00 238,560.00

(2) 2 Two nos. 6A SP switch or One No SP Switch and OneNo 6A 5 Pin Plug or Two Nos 6Amp. 5 Pin plug

6.00 EA. Cat. I 160.00 960.00 (3) Three No 6A SP switch or Two Nos SP Switch and One

No 6A 5 Pin Plug or One No SP Switch and Two Nos 6Amp.5 Pin plug

6.00 EA. Cat. II 280.00 1,680.00 (4) Two Pin/ RJ-11 Telephone Socket with Top

40.00 EA. Cat. II 140.00 5,600.00 (5) TV Co-axial Socket outlet

10.00 EA. Cat. I 100.00 1,000.00 (9) Modem Jack for Computer Open RJ-45

472.00 EA. Cat. II 140.00 66,080.00 (10) 16 Amp. SP one way switch

58.00 EA. Cat. II 160.00 9,280.00 (11) 6/16Amp. Universal socket

58.00 EA. Cat. II 180.00 10,440.00 1.2 PVC CONDUITS

1.2.1 Providing and erecting 1.5 mm thick FIA approved and ISImark (embossed) RIGID PVC PIPES of following sizecomplete erected with necessary PVC fittings & Junctionboxes fixed with adhesive solution & Clamps with followingtype of erection.

(2) For erecting concealed in wall/slab along with continuousfish wire to draw mains, laid in approved manner withplastering by cement mortar & finishing the surface to matchthe wall/ceiling.

17,708.50 MTR. (B) 25mm 28.00 495,838.00 600.00 MTR. (D) 40mm 55.00 33,000.00

1.2.2 Providing & erecting PVC Corrugated Flexible Conduit withrequired nos. of coupling, PVC bushes, Check-nuts etc.complete of following sizes.

250.00 MTR. (3) 25mm 15.00 3,750.00 120.00 MTR. (5) 40mm 28.00 3,360.00

1.2.3 Supplying & erecting PVC trunking (PVC Casing-n-Caping)having double-locking arrangement with grooves, trunking ofsize not below 12.5 mm in height as per IS 14927 Part-1 of2001 and with accessories of PVC/Resin polypropylene notbelow 1.8 mm thick duly sealed in joint & erected on wall /ceiling of following size .

40.00 MTR. (2) 25mm 23.00 920.00

2

Electrical work1.3 MAINS,TELEPHONE,CCTV,SPEAKER CABLES/WIRES

1.3.1 Mains with 1.1 KV grade FRPVC insulated ISI markedstranded Copper conductor wire in existing pipe erected with1.5 sq. mm copper conductor FR PVC insulated strandedwire of green colour for earth continuity of followingsize.

6,680.00 MTR. (c) 2 wire 2.5 sq. mm 27.00 180,360.00 3,645.00 MTR. (d) 3 wire 1.0 sq. mm 22.00 80,190.00

1.3.2 Mains with 1.1 KV grade FR PVC insulated ISI markedstranded Copper conductor wire in existing pipe erected with2.5 sq. mm copper conductor FR PVC insulated strandedwire of green colour for earth continuity of followingsize.

760.00 MTR. a. 2 wire 4 sq. mm 43.00 32,680.00 150.00 MTR. b. 2 wire 6 sq. mm 58.00 8,700.00

1.3.3 Providing & Erecting following size of TV Co-axial flexiblecable comprising inner conductor of solid bare copperinsulated with Foam PE & Secondary conductor made ofpoly - Aluminium film bonded Al. Braids @ coverage of 65%,overall sheathed with black PVC insulation.

100.00 MTR. a. RG-6 25.00 2,500.00 1.3.4 Supplying & erecting Delton or approved make Telephone

Cable electrolytic grade annealed copper conductor insulated with PE insulation twisted in to pairs with colour combinationbunched together in concentric layers so as to minimiescross-talk & wrapped with FR PVC tape & sheathed withFR PVC or HFFR outer Jacket suitable for indoor telephonewiring & confirming to C-DOT S/WS - 113 / IEC 60189-2,UL-1581 SECTION 1080 VW-1 erected in existing pipe.offollowing size of conductors & nos.of pairs. With necessaryconnections.

B Conductor Size 0.5 mm- a) Un armoured

990.00 MTR. 10) Two Pairs. 9.00 8,910.00 b) Armoured C Conductor Size 0.6 mm- a) Un armoured b) Armoured

725.00 MTR. 21) Ten Pairs. 50.00 36,250.00 265.00 MTR. 23) Fifty Pairs. 255.00 67,575.00 20.00 MTR. 24) One Hundred Pairs. 480.00 9,600.00

1.3.5 400.00 Mtr. Supply & laying of 3+1 core Sheilded CCTV Cable in prelaidpipe.

27.00 10,800.00

1.3.6 1,400.00 Mtr. Supplying & Laying of 2Core 1.sqmm shielded cable forspeaker in existing pipe duly erected complete concealed inwall/ceiling.

31.90 44,660.00

1.3.7 1,680.00 Mtr. Supply & laying of Cat 6 wire of specified make to be done inprelaid PVC/MS conduit of 25/40/50 mm dia/raceway.

22.70 38,136.00

TOTAL PART-1 1,965,445.00

3

Electrical work2 LIGHT FIXTURES & FAN

2.1 EXTERNAL LIGHTING2.1.1 Approved make High pressure sodium vapour

lamp,Tubular/Elliptical type 70 W. 230/240/250 V.erected if required.

31.00 EA. Cat.I 390.00 12,090.00 2.1.2 Supplying & erecting approved make HPSV public lighting

luminair as per Keselec ‘Z’ range or approved makecomprising an injection moulded Aluminium body 2 sidereflection or a single piece deep drawn reflector in high puritypolished & anodised Aluminium,with polystyrene acrylonitriteprotective cover & a clear acrylic protector.The control gearmounted in the body on to removable mountingplate.Suitable for vertical mounting directly on 76 mm dia.pole top with prismatic or reinforced glass protector.

31.00 Ea. (B) Suitable for 70 W Sodium Lamp 2,600.00 80,600.00 2.1.3 31.00 Ea. Galvanised iron pipe post “B” class 88.9 mm O.D 4 mtr.

Long duly painted with two coats of alluminium paintcomplete with metalic base plate of 300 mm x 300 mm x4mm thick to be erected as a compound light pole withapprox. weight 32 Kg.

1,300.00 40,300.00

2.1.4 31.00 Ea. Terminal board of size 6.3 x 127 x 152.4 mm.bakelite sheetwith 15 Amp. kitkat pattern procelain fuse unit with suitablebrass studs with nuts, washers and clamps of.size 25mm x3mm suitable for 90/114/140/195mm. dia. Pole painted withone coat of red lead paint.

105.00 3,255.00

2.1.5 Providing and erecting cable clamp of 25 mm X 3 mmM.S. flat suitable for fixing 2 Nos.of armoured cable withnuts and bolts.

31.00 Ea. (a) for 90 mm dia. Pole 40.00 1,240.00

2.1.6 31.00 Ea. Providing cement concrete foundation including excavationfor the pole with 45 x 45 x 100 cms. Deep in 1:3:6 cementconcrete (20 to 25 mm stone metal) with 45 cms x 45 cms(or 45 cms dia) x 45 cms high cement concrete plinth withnecessary curing and finishing in approved manner.(for 4 &6 mtr pole).

390.00 12,090.00

2.1.7 Fabricating terminal box for street light pole made from 3mm

thick M.S. sheet having following size complete with fixingarrangement for terminal board, with necessary hole for wireentry and exit from the box. The box shall be provided withcover and hinges on one side and bolting at other end Thebox shall be fixed by clamps fabricated from 25x6 mmflat.The box shall be painted with one coat of red oxide andtwo coats of paint having following box size.

31.00 Ea. (a) 330mm x 260mm x 140mm (depth) 500.00 15,500.00 2.1.8 Supplying & erecting Sintex or approved make SMC press

moulded composite FRP. (plastic) loop-in, loop-outboxaprox.207mm thick complete with bakelite connectorstrip 4way & hinged doors having locking arrangements withmounting clamp with nuts, bolts & washers suitable forerection on pole with cable clamps & earth bolts of followingsize of box.

31.00 Ea. (a) 300mm x 200mm x 200mm 600.00 18,600.00

4

Electrical work2.1.9 31.00 Ea. Providing, single arm bracket comprising main Light Class

G.I. tube of 4.2 cms. outside dia. complete with suitable M.S. sleeve tubing of approx. 30 cms.length and suitable for76.5mm. /80 mm or require size pole top having 5 Nos.fastners for fixing the brackets and having suitable rise asper site condition as directed and spread of 2 mtr.withsuitable welded stifner reducer and with check nut completepainted with one coat of red oxide and two coats ofAlumonium paint.Suitable for site entry fitting.

400.00 12,400.00

2.1.10 62.00 Mtr. ‘B’class Gaivanised iron pipe 50 mm. diameter having smooth finished bore of the pipe on both ends erected on the face of the wall with clamps, nuts and bolts for laying of cable along the pole wall, shaping the pipe as per site requirement to ease cable entry.

160.00 9,920.00

2.2 INTERNAL LIGHTING2.2.1 399.00 EA. Fancy bracket with decorative cylindrical shape and with

chromium plated or anodized bracket, one light with brassbatten holder to be erected on polished wooden block or on3mm laminated sheet (Wooden block or laminated sheet isincorporated in point wiring).

85.00 33,915.00

2.2.2 Providing & erecting white stove enameled Boxtype/Minolta flurocent fitting complete withHFHC electronic Ballast assembly,tube holderserected with lead wires & connection suitable for one tube36/40 watt.120 cms.with tube.

149.00 EA. Cat.III 600.00 89,400.00 2.2.3 Providing and erecting mirror optic surface or

pendent mounting fl.fitting suitable for 2 number120 cms 40 w tube complete with HFHC Electronic Ballastcomplete with holder with lead wire and connection withtubes.

69.00 EA. Cat.III 1,780.00 122,820.00 2.2.4 Approved make fluorescent tube 60 cms. 18/20

watt erected,if required.

287.00 EA. Cat.III 55.00 15,785.00 2.2.5 Supplying and erecting approved make. Tube

fitting with one number T-5 tube 24/28 W withHFHC Electronic Ballast with built in adoptors,PVC housing & mirror optic reflector,suitable to work on 120-300V,A.C.supply with connector.

422.00 EA. Cat.III 825.00 348,150.00 2.2.6 327.00 Ea. SITC of Surface mounted down lighter for 2x13/18/26 W TC-

D lamp,body partially produced in pressed steel and spinned Aluminium,reflector made of pure aluminium in silver anodised finish.Built in ballast & connecting equipment with (2X18 W Lamp).or equivalent.

1,461.00 477,747.00

CAT No:-RL2802-ARTLITE or equivalent2.2.7 499.00 Ea. SITC of Advance surface/suspended and wall mounted

luminaires with D8 micro optics/Indirect optics speciallydesigned for T5 Lamps,with T5 lamp. With asymetricdistribution.

4,418.00 2,204,582.00

CAT NO:-TPH 824/228 D8 DIHF PHILLIPS or equivalent

5

Electrical work2.2.8 324.00 Ea. SITC of casceding Kit for continuous line arrngement of TPH

824 range of luminaires(set of 1 cascade for 2luminaires)

361.00 116,964.00

CAT NO:-ZPH 525 PHILLIPS oe equivalent2.2.9 210.00 Ea. SITC of SUSPENSION KIT with micrometric clutch type

adjustment facility(set of 2) for TPH 824 luminaire.588.00 123,480.00

CAT NO:-ZPH 524 PHILLIPS or equivalent 2.2.10 133.00 Ea. Supply & installation of 15 W foot light with 15 W GLS lamp

.375.00 49,875.00

CAT NO:-2621 MAKE KLITE or equivalent2.3 FAN & EXHAUST FAN

2.3.1 432.00 Ea. Approved make Power Saving 50 Watt Ceiling Fan withCondenser 230 volt A.C. 50 Cys. 1200 mm sweepcomplete having 3blades with aluminium blades with ,canopy & 30 cms. down rod erected with 24/ 0.2 flat 3 coreflexible wire with earthing.

1,580.00 682,560.00

2.3.2 432.00 Ea. Supplying and erectin19/20mm.nominal bore Medium ClassM.S. Pipe down rod erected duly painted for fan completewith necessary 24/O..2 flat 3 core flexible wire with earthing.

80.00 34,560.00

2.3.3 432.00 Ea. Supplying & erecting Fan Hook of 10 mm M.S. Roundbargrouted in RCC slab with Making the site as original.

30.00 12,960.00

2.3.4 432.00 Ea. Supplying & erecting fan hook box of 10 mm M.S.Round barbounded to the RCC bars up to 50mm length each side andpierced through a 16 Gauge M.S.box/Heavy Duty PVC boxhaving depth of 75 mm complete erected concealed inCeiling with necessary finishing.

70.00 30,240.00

2.3.5 432.00 Ea. Providing fan clamp of for Ceiling fan complete erected withnecessary bolts & nuts.

25.00 10,800.00

2.3.6 432.00 Ea. Providing 2.5 mm thick laminated sheet to cover fan hook orFan box.

15.00 6,480.00

2.3.7 147.00 Ea. Supplying and erecting approved make reversible fresh aircum exhaust fan having size 305mm, 1400 RPM.

850.00 124,950.00

2.3.8 147.00 Ea. Providing M.S.Louver shutter of the Exhaust fan. 300.00 44,100.00

TOTAL PART-2 4,735,363.00

6

Electrical work3 MV SWITCHGEAR.

3.1 Approved make Four pole moulded case circuit breakerhaving breaking capacity ICU of 25 K.A. at 415 V,havingnormal current rating up to 25 A to 100A. with Fixed thermal& magnetic release suitable to work on A.C. supply 50 cys.with all internal connections & complete erected in16 G.M.S.housing on angle frame.

7.00 Ea. ICS=100% of ICU only Cat III 4,600.00 32,200.00 3.2 Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 35 K.A. at 415 V. havingnormal current rating up to 125A. with Fixed thermal &magnetic release suitable to work on A.C.supply 50 cys. withall internal connections & complete erected in16 G.M.S.housing on angle frame.

10.00 Ea. ICS=100% of ICU only Cat.III 6,000.00 60,000.00 3.3 Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 35 K.A. at 415 V. havingNormal current rating up to 200A.with veriable Thermal &magnetic release suitable to work on A.C.supply 50 cys. withall internal connections & complete erected in16 G.M.S.housing on angle frame.


having breaking capacity ICU of 35 K.A. at 415 V . havingnormal current rating up to 250A. with variable thermal &magnetic release suitable to work on A.C.supply 50 cys. withall internal connections & complete erected in16 G.M.S.housing on angle frame.


having breaking capacity ICU of 50 K.A. at 415 V havingNormal current rating up to 400A. with variable Thermal’ &magnetic release suitable to work on A.C.supply 50 cys.With all internal connections & complete erected in16 G.M.S.housing on angle frame.

1.00 Ea. ICS=100% of ICU only Cat.III 18,800.00 18,800.00 3.6 Supplying & erecting approved make Four Pole 415V change

over switch interior for panel mounting with operatingmechanism A.C.23 duty confirming to I.S.S. for

(C)100-125A 1.00 Ea. -CAT-III 5,900.00 5,900.00

(E)250A 1.00 Ea. -CAT-III 10,300.00 10,300.00

(F)400A 1.00 Ea. -CAT-III 16,950.00 16,950.00

3.7 Supplying and erecting tripple pole & neutral 440V/ 500Vpanel mounting Aluminium Busbars with four equal Nos. ofelectrolyte bus duly wraped with colour insulating tape forphase sequence offollowing current carrying capacity,erected with necessary bus

7.00 Rn.Mtr (A) Suitable for 100 Amp. capacity having corss section areanot less than 125 Sq.mm

450.00 3,150.00

19.00 Rn.Mtr (B) Suitable for 200 Amp. capacity having corss sectionarea not less than 250 Sq.mm

680.00 12,920.00

7

Electrical work8.00 Rn.Mtr (C) Suitable for 300 Amp. capacity having cross section

area not less than 400 Sq.mm960.00 7,680.00

3.8 Miniature circuit breaker single pole 6A to 32A suitable tooperate on 240 V A.C. system and having overload andshort circuit tripping elements and breaking capacity 10 KAto be erected in existing M.S.box. confirming to IS 8828/1996 with ISI Mark

1,230.00 Ea. -CAT-III 130.00 159,900.00 3.9 Providing & erecting 240 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA breakingcapacity & confirms to IS : 8828 in existing box havingfollowing capacity

(A) 6 to 32 Amp. 24.00 Ea. -CAT-III 360.00 8,640.00

3.10 Providing & erecting 240 V MCB double pole switch forlighting Load (B Curve) having 10 KA breaking capacity &confirms to IS : 8828 in existing box having followingcapacity

(A) 6 to 32 Amp. 8.00 Ea. -CAT-III 340.00 2,720.00

3.11 Providing & erecting 415V MCB Four Pole Switch forLighting Load (B curve) having 10KA breaking capacity &confirms to IS :8828 inexisting box having followingcapacity

(A) 6 to 32 Amp. 5.00 Ea. -CAT-III 650.00 3,250.00

3.12 Providing & erecting 415 V MCD Four Pole for Motor &Inductive Load (C Curve) having 10KA breaking capacity &confirms to IS :8828 inexisting box having following capacity

(C) 63 Amp. 68.00 Ea. -CAT-III 950.00 64,600.00

3.13 Approved make ELCBs / RCCBs conforming to IS: 12640and having sensitivity of 30 mA and Short Circuit withstandcapacity of 6 KA and suitable for operation on 3 phase andneutral 415V. having charectorstic of quick action & trippingwith all advance feature & do not incorporate any electroniccomponent for following max. rating.

(II) 40 Amps.FP 135.00 Ea. - Cat. III 2,260.00 305,100.00

3.14 1.00 Ea. Supplying and erecting approved make Segment time switchsuitable for 230V+10%16A. flotting contacts with 24 hourdial having15/30 min. segments with early manual overrideswitching for on & off without influencing the programsequence with quartz time switch With powerreserve,housed in fire proof thermoplastic enclousure &transparent cover terminal covers erected as required wirenecessary connection.

1,900.00 1,900.00

3.15 3.00 Ea. Approved make energy meter 3 phase 4 wire unbalancedload rating, 10A-40A, based on ASIC(Application specificIntegral Circuits) digital technology, temper proof, free fromeffect of external magnetic field with 3 phase indication,earth & impulse indication,6 digit electromechanical impulsecounter,suitable work on 120 v to 300 V per phase 45-55 HZ,capable to with stand 800% of basic current in sheet steelenclouser with erection on polished wooden board or asdirected.

4,050.00 12,150.00

8

Electrical work3.16 Providing & erecting weather proof, dust & vermin proof,

floor mounted front operated cubical panel board having IP52 protection made from 2mm thick CRC M.S. sheet forouter body & doors, 1.5mm thick CRC M.S.sheet for internalpartitions with necessary supporting angles, flats includingcutting, bending, drilling, welding, riveting with internalpartitions & cable alley as per requirements & instruction ofengineer-in-charge with erection of supplied switch gears,busbars, with suitable size of inter connecting PVC copperwire / copper-aluminum strips, rubber grommets, rib,bakelite control fuses for measuring instruments, earth bus& earth bolts, foundation flange - bolts-base Plates, sufficientnos. of hinged doors, handles with locking arrangement andrubber gasket complete. The Panel shall be painted withepoxy powder coating. (The rates excludes the cost ofswitchgears, bus bars, inter connecting mains, meters,Fuses etc. The dimension shall be measured excluding basebeams) The panel shall be supplied with following approvedmanufacturers with following size.

(B) locally fabricated panel board 17.20 Sq.mtr (i) with 350 mm depth 6,350.00 109,220.00

3.17 Providing and erecting AC-3 duty 3 pole power contactorwith 2 NO & 2 NC aux contacts complete with 415V/220Voperating coil suitable for (L & T, Cutler Hanimer,T.C.,Siemens, make).

2.00 Ea. (a) for 32 A rating 2,140.00 4,280.00 3.00 Ea. (b) for 40 A ratin cy 3,140.00 9,420.00 2.00 Ea. (c) for 70 A rating 5,350.00 10,700.00 2.00 Ea. (d) for 110 A rating 8,060.00 16,120.00

3.18 8.00 Ea. Supplying and erecting approved make panel mounting typeDigital Voltmeter having 3 • digits LED display, 0 to 750 ACVolts range erected on existng panel board with allconnection, wiring etc .with manufacturers calibrationcertificate.

1000.00 8,000.00

3.19 8.00 Ea. Supplying and erecting approved make panel mounting typeDigital Ammeter having 3 • digits LED display, external CToperated, calibrated for 0 to 2000 Amps suitable to operateon 500 Volt AC , erected on existng panel board with allconnection, wiring etc .with manufacturers calibrationcertificate.

1,225.00 9,800.00

3.20 24.00 Ea. Providing & erecting L.T. Current Transformer with barprimary 50/5 to 2000/5 ratio 15 VA burden erected in existingCRCA box duly secured with insulating materials connectedto the meter

235.00 5,640.00

3.21 201.00 Ea. Supplying and erecting approved make set of indicatorlamps J.S.T. type with neon lamp, lense cover, bakeliteholder complete erected with necessary connections.

80.00 16,080.00

3.22 3.00 Ea. Providing printed instruction chart both in English andGujarati and duly framed with front glasses, for treatment ofperson suffering from Electric shock.

125.00 375.00

3.23 5.00 Ea. Providing pair of rubber hand gloves suitable for working on11 KV/22 KV supply.

200.00 1,000.00

3.24 4.00 Sq.Mtr Supplying 6.00 mm thick rubber mat for L.T of requiredlength and breadth.

450.00 1,800.00

9

Electrical work3.25 8.00 Sq.Mtr Supplying 12.00 mm thick rubber mat for L.T of required

length and breadth.2,000.00 16,000.00

3.26 5.00 Ea. Supplying standard first aid box with all the standardcontents.

250.00 1,250.00

3.27 12.00 Ea. Supplying FIRE bucket round bottom of 9 litres capacitymade out of 24 guage G.I. sheet with extra handle at bottomduly painted white inside and Red out side with FIRE mark,filled with dry-sand and kept on existing stand provided orhung on wall hook.

135.00 1,620.00

3.28 4.00 Ea. Supplying and erecting floor mounting stand for keeping fournos. of FIRE buckets comprising 1500 mm in length, 900mm height frame made out of 30mm X30 mm X 4 mmangle iron with cross supports for legs, welded with 4 hooksand duly painted with one coat.

450.00 1,800.00

3.29 5.00 Ea. Wall hook 22 to 25 cms. projection for keeping fire bucketsmade out of 15 mm dia. M.S rod grouted in wall to a depthof minimum 15 cms.

55.00 275.00

3.30 30.00 Sq.Mtr Supplying & fixing Steel Chequered Plate having 10 mmthickness, duly painted with two coats of black Japan colour.(Average Wt 84.6 kg / sq.mtr).

3,650.00 109,500.00

3.31 8.00 Ea. Providing and erecting metallic vetrified danger notice boardfor MEDIUM VOLTAGE installation to be erected as perI.S.

45.00 360.00

TOTAL PART-3 1,101,300.00

10

Electrical work4 DISTRIBUTION BOARD

4.1 Providing and erecting Sheet Steel powder coated MCBdistribution board - flush / surface mounted fitted withbusbar, neutral link, earth bar and DIN rail, confirming to IS13032 and BS 5486-1986 without MCB to house appropriatenos. of MCBs.(The DBs should be used of same company ofMCB to be used)

6.00 Ea. (F) Single phase 8 way SS Double door 690.00 4,140.00 6.00 Ea. (G) Single phase 12 way single door 530.00 3,180.00

4.2 45.00 Ea. Supplying, erecting, testing and commissioning of only TPND.B. with space for FPMCB as incoming and space forDPELMCB and 8 SPMCB as outgoing per phase (i.e. 12 wayper phase D.B.)

3,894.00 175,230.00

4.3 9.00 Ea. Supplying, erecting, testing and commissioning of 8 WAYSPN D.B. with space for DPELMCB as incoming and 4SPMCB as outgoing per phase (i.e. 8 way D.B.)

984.00 8,856.00

TOTAL PART-4 191,406.00

11

Electrical work5.0 CABLES & TERMINATION5.1 Supplying & erecting XLPE(IS:7098) )(I)-88 ISI Marked

unarmoured Aluminium cable 1.1 KV grade with necessaryclamps on wall of following size.

60.00 Mtr. (a)4 core 2.5 Sq. mm 34.00 2,040.00 60.00 Mtr. (b)4 core 4 Sq. mm 37.00 2,220.00

5.2 Supplying & erecting XLPE(IS:7098)(I)-88 ISI markedunarmoured copper cable 1.1 KV grade with necessaryclamps on wall of following size.

50.00 Mtr. (b)7 core 2.5 Sq. mm 120.00 6,000.00 5.3 Providing and erecting XLPE(IS:7098)(I)-88 ISI marked

armoured cable multistrand Aluminium conductor for 1.1KV. to be laid on wall with necessary clamps or in existingcable trench / pipe at road crossing or floor of following sizeof cables .

65.00 Mtr. (B) 3 1/2 core 50 Sq. mm ( 25 Sq. mm core) 230.00 14,950.00 185.00 Mtr. (C) 3 1/2 core 70 Sq. mm ( 35 Sq. mm core) 280.00 51,800.00 150.00 Mtr. (H) 3 1/2 core 240 Sq. mm( 120 Sq. mm core) 880.00 132,000.00 50.00 Mtr. (I) 3 1/2 core 300 Sq.mm ( 150 Sq. mm core) 1,050.00 52,500.00

5.4 Providing and erecting XLPE (IS:7098)(I)-88 ISI markedarmoured cable multistrand Aluminium conductor for 1.1KV. to be laid on wall with necessary clamps or in existingcable trench / pipe at road crossing or floor of following sizeof cables.

177.00 Mtr. (e) 4 core 25 Sq. mm 140.00 24,780.00 5.5 Providing and erecting XLPE(IS:7098)(I)-88 ISI marked

armoured cable multistrand Copper conductor for 1.1 KV.to be laid on wall with necessary clamps or in existing cabletrench / pipe at road crossing or floor of following

330.00 Mtr. (a) 3 core 4 Sq. mm 105.00 34,650.00 5.6 Providing and erecting XLPE(IS:7098)(I)-88 ISI marked

armoured cable multistrand Copper conductor for 1.1 KV.to be laid on wall with necessary clamps or in existing cabletrench / pipe at road crossing or floor of following

600.00 Mtr. (B) 4 core 6 Sq. mm 170.00 102,000.00 160.00 Mtr. (C) 4 core 10 Sq. mm 255.00 40,800.00

1,690.00 Mtr. (D) 4 core 16 Sq. mm 370.00 625,300.00

12

Electrical work5.7 Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cablecomplete with out going tails, insulating tape etc for followingsize of cables.

8.00 Mtr. (b) 2 to 4 core 4 Sq. mm 25.00 200.00 80.00 Mtr. (c) 2 ot 4 core 6 Sq. mm 30.00 2,400.00 46.00 Mtr. (d) 2 ot 4 core 10 Sq. mm 30.00 1,380.00 42.00 Mtr. (e) 2 to 4 core 16 Sq. mm 40.00 1,680.00 10.00 Mtr. (f) 2 to 4 core 25 Sq. mm 40.00 400.00

5.8 Providing and, fixing heavy duty flange type brass cablegland with rubber ring for PVC insulated armoured cablecomplete with out going tails, insulating tape etc for followingsize of cables.

6.00 Mtr. (B) 3 1/2 core 35/50 Sq. mm 60.00 360.00 8.00 Mtr. (C) 3 1/2 core 70 Sq. mm 85.00 680.00 2.00 Mtr. (H) 3 1/2 core 240 Sq. mm 210.00 420.00 2.00 Mtr. (I) 3 1/2 core 300 Sq. mm 240.00 480.00

5.9 Solderiess crimping type Aluminium lugs conforming to ISsuitable for cable of following size evenly crimped with highpressure tool & connected to switchgear terminals withbrass/cadmium plated nut bolts in an approved manner.

24.00 Ea. (E) 35 Sq.mm. 10.00 240.00 32.00 Ea. (F) 70 Sq.mm. 15.00 480.00 8.00 Ea. (K) 225 Sq.mm. 55.00 440.00 8.00 Ea. (L) 300 Sq.mm. 65.00 520.00

5.10 Solderiess crimping type Copper lugs conforming to ISsuitable for cable of following size evenly crimped with highpressure tool & connected to switchgear terminals withbrass/cadmium plated nut bolts in an approved manner.

352.00 Ea. (A) 2.5 to 6 Sq.mm 5.00 1,760.00 184.00 Ea. (B) 10 Sq.mm 7.00 1,288.00 168.00 Ea. (C) 16 Sq.mm. 9.00 1,512.00

TOTAL PART-5 1,103,280.00

13

Electrical work6 EARTHING

6.1 3.00 Kg. Providing and erecting required size HOT deep Galvanisedstrip for earthing of H.T. OCB/ ACB/ Transformer LT pannelboard, Motors etc. using copper clamp.

45.00 135.00

6.2 200.00 Kg. Providing and erecting required size Copper strip for earthingof H.T. OCB / ACB/ Transformer, LT pannel board, Motorsetc. using copper clamp.

355.00 71,000.00

6.3 80.00 Kg. Providing and erecting Annealed bare Copper wire 8 to 16S.W.G.

340.00 27,200.00

6.4 30.00 Kg. Providing and erecting HOT deep Galvanised strip iron wire8 to 16 S.W.G.

50.00 1,500.00

6.5 6.00 Ea. Pipe type earthing having 150 cms.long and 2.5 cms. dia.galvanised iron pipe with coupling and buch burried inspecially prepared earth pit complete with necessary 8 SWGearth wire.

250.00 1,500.00

6.6 30.00 Ea. Add Extra for excavation in Semi hard rock (Murrum) by dryand wet blasting and chiseling for pipe type earthing .

80.00 2,400.00

6.7 Supplying & erecting earth pit of minimum bore dia.150mmsize , approved make Safe Earthing Electrode consistingPipe-in-Pipe Technology as per IS 3043-1987 made ofcorrosion free G.I.Pipes having Outer pipe dia of 50mmhaving 80-200 Micron galvanising,

(a)For Electrical installation up to 11 KV in normal soil.

Length of Pipe : 2.00 mtrs 4.00 Ea. Back filling Compound :1 no. Bag of 25 Kg. 6,000.00 24,000.00

6.8 10.00 Ea. Providing one bag of 25 Kg. Additional Back FillingCompound (BFC) suitable for safe earthing device.

740.00 7,400.00

6.90 Supplying & erecting funnel type earthing having earth plateof following size burrid in specifically prepared earth pit 3mtr. below ground with 40 kg. charcol and salt with alternatelayers of charcol & salt, 20mm.dia. G.I. pipe with Funnelwith a wire mesh for watering & bricks masonry block, C.I.Cover complete as per para 7.3 of IS 3043 with necessarylength of double G.1 / copper earth wire No 6 SWG boltedwith lug to the plate and covered in 12 mm dia. G.I. pipe 2.5mtr long complete connected to the nearest switch gear withend socket as per direction & duly tested by earth testerconfirming to ISS (As per drawing)with followingspecification.

6.00 Ea. (A) Only pipe earthing (without earth plate &with 4.5 mtr.long 40 in in dia. G.I. earth pipe (AS per drawing)

1,350.00 8,100.00

1.00 Ea. (D) with 60 x 60x 0.315 cms. Copper earth plate. 5,100.00 5,100.00 2.00 Ea. ADD Extra for excavation in Semi hard rock (Murrum) by dry

and wet blasting and chiseling for funnel type earthing ofabove .

150.00 300.00

6.11 2.00 Ea. Supply & Installation of lightening systems with all necessarymaterial like junction boxes,lightning counter, testjoint,proteciotn pipe. L.a mounting pipe. Hardware etc.

6,057.00 12,114.00

TOTAL PART-6 160,749.00

14

Electrical work7 MISCALLENEOUS

7.1 Making trench in soft soil of suitable width of 90 cms deepfor laying cable or locating the fault all over the run andbackfilling the same and making the surface proper.

150.00 Mtr. (C)For 120 Sq. mm to 300 Sq. mm cable 30.00 4,500.00 7.2 7.02 Providing & laying. R.C.C. hume pipe for cable to be laid 90

cms. below ground across the road crossing or on floor withnecessary material in an approved manner.

100.00 Mtr. (A) 250 mm dia 175.00 17,500.00 100.00 Mtr. (B)150 mm dia 140.00 14,000.00

7.3 1,350.00 Kg. Supplying ,installtion & fabrication work of MS channel,angleetc. with powder coating & colour should be finalized byarchitect at the time of execution.

95.00 128,250.00

7.4 Supply & Installation of hot dip GI Ladder/Perforated typecable tray with all accessories & clamp fitting etc. completein all respect as instructed by engineer incharge,drawing.

250.00 R.Mtr. 600 x 100mm wide (Ladder Type) 715.00 178,750.00 150.00 R.Mtr. 100 x 50 mm (Perforated type) 320.00 48,000.00

7.5 SPEAKER36.00 Ea. Supplying & installation of 30 w 2 way speaker in built LMT

45 Hz to 60 KHZ frequency response,86 DB sensitivity.with volume control.

3,312.00 119,232.00

7.6 TELEPHONEKRONE BOX

7.6.1 11.00 Ea. Supply & Fixing of Main Distribution Frame (MDF) 10 pairtagblock with KRONE.

541.00 5,951.00

7.6.2 1.00 Ea. Supply & Fixing of Main Distribution Frame (MDF) 20 pairtagblock with KRONE

773.00 773.00


1,421.00 2,842.00


2,438.00 2,438.00

TOTAL PART-7 522,236.00

15

Electrical work8 LIFT

8.1 1.00 Ea. Supplying,Installation & testing of Lift of 680KG/10passanger elevator, with 1mps speed, 5 stop/opening,direction all at same side, 5.1mts overhead, 400 Volts, 3phasr, 50 Hertz A.C., Light Supply:230 Volts, 50 Hertz singlePhase, with microprocessor based controller with V3F, fullcollective & simplex operated, S.S. Car, PVC flooring, FalseCeiling as per standard, Protected by power operated S.Scentre open door for car & landing doors,Clear entrance size800mm x 2000mm, Fully Automatic door operated, specifiedstd. fixuers/signals like: Luminous hall button with Up/Downarrow at all floors, Infrared Door Detector, Digital F.P.I in car& at all floors, Battery operated emergency light & alarm bell, Intercom between Car & Ground floor with 2 year warrantyperiod with maintenance.

1,265,000.00 1,265,000.00

8.2 2.00 Supplying,Installation & testing of Lift of 680KG/10passanger elevator, with 1mps speed, 6 stop/opening,direction all at same side, 5.1mts overhead, 400 Volts, 3phasr, 50 Hertz A.C., Light Supply:230 Volts, 50 Hertz singlePhase, with microprocessor based controller with V3F, fullcollective & simplex operated, S.S. Car, PVC flooring, FalseCeiling as per standard, Protected by power operated S.Scentre open door for car & landing doors,Clear entrance size800mm x 2000mm, Fully Automatic door operated, specifiedstd. fixuers/signals like: Luminous hall button with Up/Downarrow at all floors, Infrared Door Detector, Digital F.P.I in car& at all floors, Battery operated emergency light & alarm bell, Intercom between Car & Ground floor with 2 year warrantyperiod with maintenance.

1,315,000.00 2,630,000.00

Make:-OTIS/TRIOTOTAL PART-8 3,895,000.00

TOTAL ESTIMATE 13,674,779.00

16

Documents

Volume-III Price Bid