Von Duprin Price Book 2014- 4/14 Update

Effective March 3, 2014 • Rev 4/14

Price book 1

This price list supersedes and cancels all previous price lists. Prices shown are subject to change without notice.

Administrative OfficesAllegion Administrative Office11819 N. Pennsylvania St.Carmel, IN 46032allegion.com/us

Customer CareOur Customer Care Representatives are available for questions or assistance. You can reach them at 877-671-7011 (Press 1 for Sales Support | Press 2 for Product Support | Press 3 for SSC) or through the email addresses listed below:

Placing ordersYou can place orders with Allegion via the fax number or email listed below:

Exits, Mullions Special Orders Fax#: 1-800-999-0328 Fax#: 1-877-730-6248Email: [email protected] Email: [email protected]

Sales Support

Carolinas (North Carolina, South Carolina, Virginia) [email protected]

Central (Arkansas, Illinois, Iowa, Kansas, Missouri, Nebraska, Oklahoma) [email protected]

Chicago (Illinois-Northern, Wisconsin) [email protected]

Florida [email protected]

Great Lakes (New York, Pennsylvania) [email protected]

Metro New York [email protected]

Request for Quote

Carolinas (North Carolina, South Carolina, Virginia) [email protected]

Central (Arkansas, Illinois, Iowa, Kansas, Missouri, Nebraska, Oklahoma) [email protected]

Chicago (Illinois-Northern, Wisconsin) [email protected]

Florida [email protected]

Great Lakes (New York, Pennsylvania) [email protected]

Metro New York [email protected]

Technical Product Support

Exit Devices [email protected]

Michigan [email protected]

Mid Atlantic (Delaware, Maryland, New Jersey) [email protected]

Midwest (Indiana, Kentucky, Ohio, West Virginia) [email protected]

Mountain States (Colorado, Idaho, Montana, Nevada, Utah, Wyoming) [email protected]

New England (Connecticut, Main, Massachusetts, New Hampshire, Rhode Island, Vermont) [email protected]

North Central (Minnesota, North Dakota, South Dakota) [email protected]

Michigan [email protected]

Mid Atlantic (Delaware, Maryland, New Jersey) [email protected]

Midwest (Indiana, Kentucky, Ohio, West Virginia) [email protected]

Mountain States (Colorado, Idaho, Montana, Nevada, Utah, Wyoming) [email protected]

New England (Connecticut, Main, Massachusetts, New Hampshire, Rhode Island, Vermont) [email protected]

North Central (Minnesota, North Dakota, South Dakota) [email protected]

Northern California [email protected]

Northwest (Alaska, Oregon, Washington) [email protected]

South (Alabama, Georgia, Louisiana, Mississippi, Tennessee) [email protected]

Southern California (California-Southern, Hawaii) [email protected]

Southwest (Arizona, New Mexico) [email protected]

Texas [email protected]

Northern California [email protected]

Northwest (Alaska, Oregon, Washington) [email protected]

South (Alabama, Georgia, Louisiana, Mississippi, Tennessee) [email protected]

Southern California (California-Southern, Hawaii) [email protected]

Southwest (Arizona, New Mexico) [email protected]

Texas [email protected]

2 Price Book 1Effective March 3, 2014 • Rev. 4/14

3Price Book 1Effective March 3, 2014 • Rev. 3/14

IndexSales Policy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3General Terms and Conditions of Sale and Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-7Finishes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8Standard Lever Suites. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9M Collection Levers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11Special Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14-17Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . inside back cover

Exit Devices22 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18-2033A/35A Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21-2955 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30-34, 4088 Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-4094/95 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60-6298/99 Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41-55XP98/99 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56-59

Exit Device Options-2 - Double Cylinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 59 -2SI - Double Cylinder with Security Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51CD - Cylinder Dogging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27, 51, 58CI - Cylinder Dogging Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 58Crossbar Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40CS - Cable System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 55CX - Chexit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29, 54DI - Dogging Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51, 58E - Electric Unlocking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40, 54, 59EL - Electric Latch Retraction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 53, 58Flush Transom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40HH - Hurricane . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51INS - Insulclad or Applied Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 53LBR - Less Bottom Rod . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 27, 51, 62LD - Less Dogging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 27, 51LX - Latchbolt Monitoring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 53, 58, 62, 82PL - Pullman Latches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28, 40, 51PN - Pneumatic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27, 51QEL - Quiet Electric Latch Retraction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28, 53, 58, 62RX - Request to Exit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28, 40, 53, 58, 82SD - Special Center Case Dogging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51SG - Safety Glow. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27, 51SS - Signal Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 53Touchbar Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27, 51WH - Weep Holes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28, 51WS - Windstorm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Exit Locks - Latching HardwareGUARD-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63-64237 Two Point Latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

AccessoriesControls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69, 70-71Cover Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Cylinders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72Dummy Cross Bars-55DU/88DU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Dummy Touch Bars-330/350 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Extension Rods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76Glass Bead Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72Mortise Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72Mullions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73-74One Piece Top Rod Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76Rod & Latch Guards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74Security Screws Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77Sex Bolts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78SLM Blocking Mounting Packages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66-68, 70

Electrical ProductsAlarm Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Mortise Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72Electric Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78-79Monitor Strikes / Power Transfers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80Power Supplies / Delay Exit System / Relays / Switch Kits . . . . . . . . . . . . . . . . . . . . . . . 81-83

PartsNumerical Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84-8722 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88-8933A/35A Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90-9333A/3549A Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94330/350 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9555 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96-9888 Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99-10494/95 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11398/99 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105-11098/9949 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111XP98/99 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1127500 Mortise Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115-116Electric Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125-128Electrical Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129-131GUARD-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Maintenance Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124Mullions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122Screw Packages/Shims/Miscellaneous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123Service Replacement Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132 - 133Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117-121Part Number Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134-135

Sales PolicyGeneral: The Company will comply with applicable laws and regulations in effect on the date of the Company’s proposal as they may apply to the manufacture of the Equipment. Compliance with any local governmental laws or regulations relating to the location, use or operation of the Equipment, or its use in conjunction with other equipment, shall be the sole responsibility of the Purchaser.

Title and Risk of Loss: Title and risk of loss or damage to the Equipment shall pass to the Purchaser upon tender of delivery F.O.B. manufacturing facility unless otherwise agreed upon by the parties, except that a security interest in the Equipment shall remain in the Company, regardless of mode of attachment to realty or other property, until full payment has been made therefor. Purchaser agrees upon request to do all things and acts necessary to perfect and maintain said security interest and shall protect Company’s interest by adequately insuring the Equipment against loss or damage from any cause wherein the Company shall be named as an additional insured.

Minimum Charge: Minimum invoice is $50.00 net product value, excluding freight charges.

Freight: All shipments are F.O.B. Indianapolis, Indiana (from factory or FastTrack).

We will allow freight on order shipments of $7,000.00 net or more to freight terminal nearest destination via route of our selection. Freight allowed will be prepaid. Separate orders cannot be combined for shipment to qualify for freight allowed.

We reserve the right to select the carrier on freight allowed shipments.

When delivered to the carrier, shipments become property of the purchaser who assumes the risk of loss or damage in transit.

On shipments to Alaska and points outside of Continental U.S.A. freight will be allowed, as above, to ocean shipping points.

Von Duprin, Inc. will ship as requested, freight collect, if the customer is willing to bear the entire expense and so indicates on the order.

Non-Standard and Special Items: Contact factory for availability and price of non-standard finishes and special items not listed in this price book. Additional charges may be accrued for product modification or engineering services.

Additional charges may be necessary for furnished material for doors, frames, and rabbeted frames, other than standard. Submit door and frame detail if quotation is desired 1-3/4" and 2-1/4" are considered standard.

Purchase Authorization: Prior credit approval will be required from all purchasers. Possession of this price book does not imply the right to purchase from Von Duprin, Inc. Authorized Von Duprin, Inc. distributors will be required to maintain a minimum of $25,000.00 in net purchases per year to be maintained as a direct factory account.

Patents: The Company shall defend any suit or proceeding brought against the Purchaser and shall pay any adverse judgment entered therein so far as such suit or proceeding is based upon a claim that the use of the Equipment manufactured by the Company, and furnished under this contract constitutes infringement of any patent of the United States of America, providing the Company is promptly notified in writing and given authority, information and assistance for defense of same; and the Company shall, at its option, procure for the Purchaser the right to continue to use said Equipment, or to modify it so that it becomes non-infringing, or to replace the same with non-infringing equipment, or to remove said Equipment and to refund the purchase price. The foregoing shall not be construed to include any agreement by the Company to accept any liability whatsoever in respect to patents for inventions including more than the Equipment furnished hereunder, or in respect of patents for methods and processes to be carried out with the aid of said Equipment. The foregoing states the entire liability of the Company with regard to patent infringement.


Terms and Conditions

1. GENERAL/ACCEPTANCE. (a) This Agreement contains the only terms and conditions by which Company will quote and sell Deliverables to Customer; (b) The terms “purchase order” or “order” for the purposes of this Agreement include the term “request for quotation,” as appropriate; (c) This Agreement supersedes all pre-printed or boilerplate terms and conditions set forth in any purchase order issued by Customer; (d) No reference herein to Customer’s purchase order will in any way incorporate different or additional terms and conditions, all of which Company hereby expressly objects to; (e) ANY ACCEPTANCE BY COMPANY OF CUSTOMER’S PURCHASE ORDER IS EXPRESSLY CONDITIONED ON THE CUSTOMER’S ASSENT TO AND ACCEPTANCE OF THE TERMS AND CONDITIONS CONTAINED IN THIS AGREEMENT; (f) Company reserves the right to decline any order, in whole or in part, for any reason.

2. ORDERS. a. Order Processing. When Customer wishes to place an order for Deliverables, it will deliver to Company a purchase order. All such purchase orders must (i) be in a written format acceptable to Company, (ii) be legible, (iii) include a purchase order number, (iv) include Customer’s account number, invoice address, ship to address, shipping method, shipper’s letter of instruction for international shipments, part number, pricing, and designated contact information, (v) include, if applicable, any special configuration ID numbers, necessary programming information, special factory instructions, and requested specifications regarding a particular finish, handing, design, backset, or strike, and (vi) reference any applicable pricing discounts under an ongoing buying program or based on a written quote from Company, along with the applicable buying program number or quotation number. b. Minimum Orders. In the event the order value does not meet any required minimum net Deliverable value, Company may, at its sole discretion, (i) increase the quantity of items in the order to meet the minimum net Deliverable value requirement; (ii) apply a minimum order charge; (iii) reject the order, or (iv) waive the requirement, provided that the waiver of a requirement for one order shall not constitute a waiver of the requirement for any future orders. c. Acceptance of Purchase Orders. Company will endeavor to (i) acknowledge receipt of each purchase order issued in accordance with this Agreement, and (ii) notify Customer whether Company accepts or rejects the purchase order. If Company fails to accept or reject a purchase order within a reasonable time period, such failure to respond will be deemed a rejection of the entire order. d. Changes to Order/ Cancellation of Orders. Additional terms and conditions regarding order changes and cancellations are available on the Allegion customer website, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. Unless otherwise provided herein, Customer acknowledges that (i) requesting a Change Order may cause a delay in the scheduled shipment date, a longer lead time or result in a new scheduled shipment date; (ii) Orders may not be changed after 48 hours of Company’s order acknowledgment; (iii) After 48 hours of Company’s order acknowledgment, all changes to an accepted purchase order will be subject to a Change Order charge of 25% of the net Deliverable value, plus the cost of labor and fabrication or raw material that Company incurred prior to the receipt of the Change Order from Customer, or that may be required due to the Change Order; (iv) the requested change may result in additional charges for labor, fabrication, and raw material, and (v) if Customer cancels an order or portion of an order that includes Deliverables that have been manufactured and prepped for shipping, a 35% restocking fee will apply. Notwithstanding the foregoing, Customer cannot change or cancel credential orders, reader orders, biometrics orders or any non-cataloged, special, Custom or nonstandard items once they have been placed. All cancelled orders for a Non Recurring Expense (NRE), credential orders, reader orders, biometrics orders, and/or Custom orders will be subject to a cancellation charge of 100% of the acknowledged price. e. Add-ons. Add-on orders will not be accepted. Additions to orders will be entered as separate stand-alone orders and must qualify for all terms of sale, including discounts, on an individual basis. f. Fast-Track Orders. No changes or cancellations will be accepted on the 24-Hour Fast Track Program. For 3-day Fast Track orders, changes and cancellations may only be requested by Customer within 24 hours of Company’s order acknowledgment if the order has not shipped. For 5-Day Fast Track orders, changes and cancellations may only be requested by Customer if the order has not shipped and if the request is made to Company within 48 hours of Company’s order acknowledgment. Return Material Authorization (RMA) for Deliverables must be processed through Fast Track Customer Service. g. Steelcraft Orders. For all Steelcraft orders, changes or cancellations are allowed without penalty only if made within 48 hours of Company’s order acknowledgment, and provided that the order has not shipped. Some exceptions do apply – please consult the factory. Changes are not allowed on Rapid Program orders after the order has been entered and acknowledged. After 48 hours of Company’s order acknowledgment, all changes or cancellations are subject to a charge of 25% of the order. Unless otherwise specified by Company in writing, any changes to orders acknowledged by Company that affect the delivery date will be deemed a new order and will require acknowledgement by Company as provided in this Section. Additional products, features, terms and conditions regarding the Rapid Program are available on the Allegion, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE.

3. PRICES, INVOICES AND PAYMENT. a. Prices. The prices in Company’s Price Book are subject to change at any time, without notice to Customer. Company may charge Customer additional amounts if Customer requests special packing, marking, shipment, product modification, or engineering services. Oral prices specified by Company are null and void. Quote numbers must be referenced on Customer’s purchase order in order for the Company’s quoted pricing to apply. Orders that do not reference a quote number will receive buy program pricing or book net pricing. Quoted prices are for those specific products quoted for a specified job, and are subject to the Price Book in effect at the time the quote was issued by Company. b. Taxes. Prices do not include any present or future federal, state or local property, license, privilege, sales, use, excise, gross receipts or other like taxes or assessments which may result from transactions or any services performed in connection therewith. Any taxes, charges, or duties imposed by any governmental authority on the sale of Deliverables will be paid by Customer, in addition to the selling price specified by Company. c. Payment Terms. Company will deliver to Customer an invoice with each shipment of Deliverables hereunder. Customer will pay all invoiced amounts within 35 days of the invoice date, provided that Customer may take a 2% discount if Customer pays in cash and Company receives said payment within 20 days of the invoice date. For the avoidance of doubt, cash discounts do not apply to credit card payments. Customer will make all payments in United States dollars. Past due invoices will be subject to a late payment service charge of 1.5% per month on any overdue unpaid balance, equivalent to 18% per annum, or the maximum rate permitted by law, whichever is less. Customer shall reimburse Company for all costs of

collection, including, without limitation, reasonable attorneys’ fees, for any overdue amount owed by Customer to Company, and such collection costs shall also be subject to interest charges.

4. QUOTATIONS. a. Project Quotations. Project or new construction quotes are restricted to the specific project quoted for the quantities, finishes, and series of Deliverables referenced on the quote. Company reserves the right to require proof of sale of Company products for any quoted project. b. Stock Quotations. Deliverables fulfilling stock quotations may only be used for the following: i) Stocking of the Customer’s shelves for small, quick-turn, discretionary projects, or ii) Sale to a general contractor or installer for new construction. Stock quotations may not be used for any project containing any Company no-substitution, specified products. Deliverables purchased under Stock Quotations cannot be redistributed to other Customer branch locations or re-sold to other resellers or used for aftermarket sales, end-user annual contracts or sold over the counter to any walk in trade. c. General. All quotes are subject to this Agreement, unless otherwise specified by Company, and are subject to change at any time prior to Company’s acceptance of a purchase order referencing the applicable quote number. Company, its representatives and employees reserve the right, in their sole discretion and for any reason, to refuse a Customer’s request to quote a price other than the standard list price, regardless of whether Company or its representatives or employees have previously quoted discounted prices to the Customer on some or all of its orders. Customer’s failure to comply with this Section 4 will be considered a material breach of this Agreement, and will entitle Company to immediately terminate any purchase orders and/or Customer’s ability to distribute Company’s products.

5. SECURITY INTEREST. Customer grants Company, and Company retains, a purchase money security interest and lien on any and all of Customer’s rights, title and interest in each Deliverable sold by Company to Customer, wherever located, until the invoice for the applicable Deliverable(s) is paid in full, including any late charges and costs of collection. Customer authorizes Company to, and will assist Company in, taking all necessary steps to perfect and maintain Company’s interest in such Deliverables.

6. CREDIT TERMS. Unless Customer pre-pays all of its purchase orders in advance, its purchase orders will be subject to the credit limit and other terms of credit (“Credit Terms”) set forth in Company’s credit application, which Credit Terms Customer acknowledges are subject to change by Company at any time. Company reserves the right to request payment in advance of shipment or any order or to request adequate assurances for Customer’s payment of an order and may withhold or stop shipment, without any liability to Company, until Customer submits payment or adequate assurance of payment.

7. RESALE OF DELIVERABLES. Customer agrees and warrants that it will offer Company products in support of Company-written specifications and will maintain sufficient inventory to adequately support End Users, installers, and/or general contractors’ needs. Customer will adhere to any MSRP or resale pricing programs of Company. Failure to comply with this provision will be considered a material breach of this Agreement, and will entitle Company to immediately terminate any purchase order and/or Customer’s ability to distribute Company’s products. Customer shall, at its own expense, gain and maintain sufficient knowledge of the industry and products competitive with Deliverables so as to be able to (a) explain in detail to End Users, installers, and/or general contractors the differences between the Deliverables and competing products, (b) ensure that an adequate number of trained, capable and qualified technical personnel with sufficient knowledge of the Deliverables and who have obtained all necessary licenses and permits are available to assist End Users, installers, and/or general contractors, and (c) respond to such End Users, installers, and/or general contractors with respect to the general operation and use of the Deliverables including, but not limited to, (1) acting as a liaison between the End Users, installers and/or general contractors and Company in matters requiring Company participation, (2) providing general product information and configuration support on standard protocols and features, (3) collecting relevant technical problem identification information, and (4) posting and distributing any warranty information concerning the Products in accordance with Company’s instructions. Customer is responsible for all service and support resulting from the re-sale of any Deliverable to End-Users, installers and/or general contractors, examples of which may include, but are not limited to, support activities such as installation, initialization, software set-up, training, trouble-shooting, technical support and field service. In the event Customer is unwilling or unable to perform said support activities, Company reserves the right to recover from Customer any and all expenses incurred by Company to resolve the afore-mentioned End-User, installer and/or general contractor issues. Technical product training is recommended for Customer in order to fully service and support Deliverables purchased from Company that are resold to End-Users, installers and/or general contractors.

8. DEFAULT. If Customer is in default of payment or otherwise with respect to any purchase order or other contract with Company, Company shall have the right, in addition to all other legal remedies and without prejudice to any of its right hereunder, to defer further shipments under that or any other purchase order until such default is corrected and to declare all outstanding bills of Customer to be immediately due and payable.

9. INSPECTION AND DELIVERY. a. Inspection. Customer will inspect all Deliverables immediately after receiving them. Customer will be deemed to have accepted the Deliverables unless Customer notifies Company in writing of any nonconformance within 10 days of delivery and provides Company written evidence reasonably documenting that nonconformance. Inspection of Deliverables at Company’s facility is not permitted. b. Delivery. Delivery schedules for Deliverables are based upon current production capacities, material or component availability, and inventory, and may be changed by Company as conditions require. Delivery schedules for services are based upon Company’s prompt receipt of, and prompt access to, Customer’s equipment and all information necessary to complete the services. In no event will any delivery date be construed as falling within the meaning of “time is of the essence.” Partial delivery shall be accepted by Customer and paid for at the price and on the terms stated herein. Any partial delivery shall constitute a separate sale, and payment shall be separately made when due. If any part of a delivery hereunder is not delivered by Company in accordance with Customer’s purchase order, this Agreement shall not be affected thereby.

10. TITLE & RISK OF LOSS. Unless otherwise specified by Company, (i) where the Customer is located in the United States, all Deliverables will be sold “Uniform Commercial Code, FOB Origin, Company’s factory”; and (ii) where the Customer is located outside of the United

Allegion General Terms and Conditions of Sale and Service


States, all Products will be sold “Ex-works, Company’s factory (Incoterms 2010).” In either instance, title and risk of loss will pass to Customer upon delivery to the carrier at Company’s factory, provided, however, as set forth herein, Company shall retain a security interest in the Deliverables until full payment has been made therefore, and Customer agrees, upon request, to do all things and acts necessary to protect Company’s interest by adequately insuring the Deliverables against loss or damage from any cause and to have Company named as an additional insured. Customer will promptly provide Company with a copy of the relevant certificate of insurance upon Company’s request.

11. SHIPPING & SHIPPING PROGRAMS. a. Freight Charges. Company will ship all Deliverables in accordance with Company’s freight shipment guidelines, which are set forth on the Allegion customer website (“Freight Shipping Guidelines”), WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN. b. Rush Charges. Expedited order options are available as set forth in Company’s freight shipping guidelines. c. Packing and Marking. Company will pack, mark, and ship Deliverables according to its standard procedures for shipment, unless the parties agree, in writing, that Company will comply with any special instructions provided by Customer. Special instructions may result in an increased price. d. International Shipments. For all international orders, a Shipper’s letter of instruction must be submitted in writing with the order. Failure to do so will result in the order being rejected. Complete adherence to this order requirement will be strictly enforced. Company will not be held liable for any charges resulting from delays due to lack of complete required information being supplied. e. Once received by the Company, a purchase order cannot be combined with any other order to qualify for freight allowances. In addition, Customer may not combine any Company brands or product categories on a single order to meet the applicable net freight allowance, except in the case of: i) FastTrack 24 Hour/5 Day Program, which is available for Schlage, Von Duprin, LCN and Glynn-Johnson products; ii) FastTrack 24 Hour/3 Day Program, which is available for Falcon Locks, Exits and Closers and Ives products. When an order includes products from the brands listed in both (i) and (ii) above, the order will automatically default to the FastTrack 24 Hour/5 Day Program lead times and freight allowance.

12. CLAIMS. All claims must be submitted in writing to Company as follows: (i) All claims for prices must be submitted within thirty (30) days from the date of invoice; (ii) All claims regarding Deliverable quantity or incorrect orders must be submitted within ten (10) days from the date of delivery; (iii) All claims for damage to Deliverables (while in the care, custody, and control of Company) must be submitted within thirty (30) days from the date of invoice; (iv) All claims for loss or damage to Deliverables while in the care, custody, and/or control of a carrier will be the responsibility of Customer, unless otherwise agreed by the parties.

13. PRODUCT CHANGES. Company’s product policy is one of ongoing update and revision, and accordingly, Company reserves the right to change, without notice, the design of, or the process of manufacturing, the Deliverables covered by this Agreement.

14. PRODUCT USAGE LIMITATION. Customer agrees: (i) not to sell or use a Deliverable in any manner contrary to the manner in which the Deliverable is intended to be used; and/or (ii) not to modify the design of any Deliverable for use with another product without the prior written consent of Company.

15. PRODUCT RETURNS. Unless otherwise agreed by the parties in writing, Deliverables that are correctly furnished by Company per the purchase order may not be returned unless Customer receives written authorization from Company. If returns are authorized by Company, a return merchandise authorization (“RMA”) number must be provided by Company. Deliverables identified under such RMA must be returned to Company within 90 days of issuance of the RMA. Such RMA number and any accompanying RMA documents, the original invoice number, and a written explanation for the return must be included with the returned Deliverables in order for Company to inspect and approve a credit for the return. For warranty returns, a credit in the amount of the original purchase price will only be issued if, after Company’s receipt and inspection of the returned Deliverables, Company confirms, in its sole discretion, the defect is valid and approves the return. For non-warranty returns, (a) in the event Company approves such a return, a credit will be made to Customer’s account in the amount of the original purchase price less freight and a handling charge of 35% of the net material on the original invoice; and (b) Only Deliverables that are new, current, standard, non-obsolete, non-specially manufactured, unused, in their original condition as at the time of sale by Company to Customer, in their original packaging and in Customer’s inventory less than 180 days from the date of shipment by the Company may be considered by Company for return. Such credit will only be issued if, after Company’s receipt and inspection of Deliverables, Company approves the return. The amount of final credit will be determined upon receipt at the factory and following Company’s inspection and analysis of the condition of the returned material. Company retains the right to deny credit to anyone for any reason.

16. CONFIDENTIAL INFORMATION. a. Non-Use And Non-Disclosure. Customer shall not use the Confidential Information of the Company except for the purpose of performing its obligations under this Agreement or exercising the rights granted herein (the “Purpose”). Customer shall protect Confidential Information of the Company from disclosure and unauthorized use in the same manner that it protects its own Confidential Information, but in no event shall such standard of care be less than reasonable care. Customer may disclose Confidential Information of the Company only to its employees who require such information for the Purpose and who are subject to confidentiality obligations at least as protective as those set forth herein. b. Proprietary Information and Advice. (a) All designs, data, and specifications provided by Company are proprietary and may not be disclosed or reused by Customer without the prior written consent of Company; (b) Company assumes no obligation or liability for any advice given by Company, the results obtained, or damages incurred as a result of such advice, and all such advice is given and accepted at Customer’s risk. c. Return. Upon the termination or expiration of a purchase order or this Agreement or upon the request of the Company, the Customer agrees to end all further use of, to immediately return to the Company the original version of, and to delete or destroy all copies of, any and all Confidential Information of the Company.

17. TRADEMARKS. Except as agreed to by Company in writing, Customer agrees not to (a) use Company’s name in any form of publicity; or (b) use, create, register or market, directly or indirectly, in whole or in part, Company’s names, logos, brands, or any other trademarks, or names that are now or may hereafter be owned by Company, as part of

Customer’s corporate or business name, as part of an internet domain name, uniform resource locator (URL), or in any way connected with Customer’s business, trade address or other designations. Upon termination of this Agreement or upon the request of company for any reason, any use of Company’s trademarks or names will be immediately discontinued.

18. LIMITED WARRANTY.COMPANY MAKES NO OTHER WARRANTIES EXCEPT THOSE STATED IN COMPANY’S LIMITED WARRANTY IN EFFECT ON THE DATE COMPANY ACCEPTS EACH APPLICABLE PURCHASE ORDER (“LIMITED WARRANTY”). THE LIMITED WARRANTY MAY BE FOUND IN THE APPLICABLE PRICE BOOK AND ON THE ALLEGION CUSTOMER WEBSITE, WHICH TERMS ARE EXPRESSLY INCORPORATED HEREIN BY REFERENCE. COMPANY WILL MAIL CUSTOMER A HARD COPY OF THIS WARRANTY UPON CUSTOMER’S WRITTEN REQUEST. IN THE EVENT THAT CERTAIN DELIVERABLE WARRANTIES ARE NOT FURNISHED BY THE COMPANY TO CUSTOMER, COMPANY WARRANTS ONLY TO CUSTOMER THAT THE DELIVERABLES WILL BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP FOR A PERIOD OF 12 MONTHS FROM THE DATE OF SHIPMENT OF THE DELIVERABLES. COMPANY’S SOLE OBLIGATION UNDER THIS WARRANTY IS LIMITED TO REPAIRING OR REPLACING, AT COMPANY’S OPTION, THE DEFECTIVE DELIVERABLE, PROVIDED WRITTEN NOTICE OF THE DEFECT OR NONCONFORMANCE IS PROVIDED BY CUSTOMER WITHIN 30 DAYS OF DISCOVERY OF THE DEFECT OR NONCONFORMANCE. COMPANY DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, WITH RESPECT TO THE DELIVERABLES, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE. a. Exclusions. The provisions of this Limited Warranty do not apply to Deliverables that: (A) are not the proper size for the application; (B) are not installed in accordance with Company’s published installation instructions; (C) are installed with improper or incorrect parts and/or are used for purposes for which they are not designed or intended; (D) have been repaired or altered without the Company’s prior written consent; (E) have been subjected to misuse, abuse, negligence or accident; (F) have been improperly stored, installed, maintained or operated; (G) have been used in violation of written instructions provided by Company to Customer; (H) have been subjected to improper temperature, humidity, or other environmental conditions, or (I) have been affected by normal wear and tear. In addition, the provisions of this Limited Warranty do not apply to any defects or issues with the design or performance of equipment or products not manufactured by Company, nor does it apply to any code compliance or permit requirements for the assembly, installation, erection or construction of any goods. Company is not responsible for loss or damage resulting from use of Deliverables in conjunction with parts or systems not manufactured by Company. Accessories or products furnished by the Company, but manufactured by others, shall carry whatever warranty the manufacturers have conveyed to the Company and which can be passed to Customer. b. Services. Company warrants that its services will be free from defects in material and workmanship for a period of 12 months from the date of completion of the particular items of service. Company’s sole obligation under this service warranty is limited to repair or reperformance, at its option of the service, provided however, if repair or reperformance is either impractical or impossible, the Company will refund to Customer that portion of the price paid to Company for any defective service, provided written notice of the defect or nonconformance is provided by Customer within 30 days of discovery of the nonconformance. c. Notification. Customer agrees to immediately notify Company in writing if any claim is made against Customer for any damages caused by any modules, parts, products, service or other Deliverables which may be the direct result of any defect in the manufacture of such aforementioned products. Customer agrees to cooperate with Company and its counsel in the defense of such claim and Customer agrees not to settle such claim without Company’s written consent. If Customer fails to notify Company of such claim or fails to cooperate in such defense as aforesaid, then Company shall be discharged from any obligations under this Section and shall have no further liability to Customer. d. Exceptions. The following costs and expenses are not covered by the provisions of these limited warranties: (i) labor costs for the removal and reinstallation of Deliverables or other manufacturer’s products; (ii) shipping and freight expenses required to return Deliverables to Company; (iii) normal maintenance; and (iv) economic losses. In addition, the provisions of this warranty are not applicable to anything other than defects in Company’s material (products only) or workmanship.

19. LIMITATION OF REMEDIES.CUSTOMER’S EXCLUSIVE AND SOLE REMEDY ON ACCOUNT OF, OR IN RESPECT OF, THE FURNISHING OF NON-CONFORMING DELIVERABLES, SHALL BE TO (A) SECURE REPAIR OR REPLACEMENT OF THE PRODUCTS; OR (B) SECURE REPAIR OR RE-PERFORMANCE OF THE SERVICES OR TO OBTAIN A REFUND OF THE PRICE PAID FOR THE DEFECTIVE SERVICE, ALL AT COMPANY’S OPTION. IN NO EVENT WILL THE COMPANY’S MAXIMUM LIABILITY EXCEED THE SELLING PRICE FOR THE DELIVERABLE. THE WARRANTY, OBLIGATIONS AND LIABILITIES OF COMPANY (INCLUDING ITS SUPPLIERS) AND THE RIGHTS AND REMEDIES OF CUSTOMER ARE EXCLUSIVE AND ARE IN LIEU OF AND CUSTOMER HEREBY WAIVES AND RELEASES ALL OTHER WARRANTIES, OBLIGATIONS, REPRESENTATIONS OR LIABILITIES EXPRESS OR IMPLIED ARISING BY LAW, IN CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT LIABILITY) OR OTHERWISE, INCLUDING BUT NOT LIMITED TO (I) ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY WARRANTY IMPLIED THROUGH COURSE OF PERFORMANCE, COURSE OF DEALING, OR USAGE OF TRADE OR (II) CLAIMS ARISING OUT OF THE NEGLIGENCE OF COMPANY OR COMPANY’S SUPPLIERS OR (III) ANY OTHER CLAIM ARISING OUT OF, CONNECTED WITH, OR RESULTING FROM THE PERFORMANCE OF COMPANY OR FROM THE DESIGN, MANUFACTURE, SALE, REPAIR, LEASE OR USE OF THE DELIVERABLE, OR ANY COMPONENT THEREOF, DELIVERED OR RENDERED HEREUNDER OR OTHERWISE.

20. INDEMNIFICATION AND LIMITATION OF LIABILITY. a. Customer shall indemnify, defend and hold Company, and its officers, directors, employees, customers, Affiliates, suppliers, users and agents, (collectively the “Indemnitees”) harmless from and against any and all damages, claims, losses, expenses, costs, obligations, liabilities, including without limiting the generality of the foregoing, liabilities for court costs and attorneys’ fees, suffered directly or indirectly by an Indemnitee by reason of, or arising out of any injury, death or loss to any person, or injury to any property (collectively, “Damages”), received or sustained by any person(s) or property, arising out of, occasioned by, attributable or related to i) any breach of any representation or warranty made by Customer, its officers,



directors, employees, affiliates, users, agents, representatives or customers to Company or any third party, (ii) any failure by Customer to perform or fulfill any of its covenants, acts and/or omissions to Company or to any third party, or (iii) any litigation, proceeding or claim by any third party relating in any way to the obligations of Customer and/or the Deliverables sold by Company to Customer hereunder. Customer shall not consummate any settlement of any indemnified claim without the Indemnitees’ prior written consent. Customer’s obligation to indemnify Indemnitees will continue in full force and effect notwithstanding the termination or expiration of any order under this Agreement. In any claim against an Indemnitee by an employee of Customer or any subcontractor or anyone directly or indirectly employed by any of them or anyone for whose acts they may be liable, the indemnification obligations set forth in this Section shall not be limited in any way by or for Customer or any subcontractor under any applicable worker’s compensation act, disability or other employee benefit act. This provision shall survive termination of any order or Agreement. IN NO EVENT WILL COMPANY, ITS OFFICERS, DIRECTORS, EMPLOYEES, CUSTOMERS, AFFILIATES, USERS AND AGENTS, (NOR COMPANY’S SUPPLIERS) BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES OF ANY KIND OR NATURE UNDER ANY CIRCUMSTANCES INCLUDING, BUT NOT LIMITED TO, LOSS OF USE OF THE PRODUCTS, SERVICE INTERRUPTION, LOSS OF PROFITS, LOSS OF REVENUE, LOSS OF INTEREST, LOST GOODWILL, LOSS OF DATA, WORK STOPPAGE, IMPAIRMENT OF OTHER GOODS, LOSS BY REASON OF SHUTDOWN OR NON-OPERATION, INCREASED EXPENSES OF OPERATION, OR CLAIMS OF CUSTOMER’S CUSTOMERS, OR ANY OTHER LOSSES OR DAMAGES ARISING OUT OF ANY LACK OR LOSS OF USE OF THE DELIVERABLES WHETHER BASED ON CONTRACT, WARRANTY, TORT (INCLUDING, BUT NOT LIMITED TO, STRICT LIABILITY OR NEGLIGENCE), PATENT INFRINGEMENT, OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. b) INTELLECTUAL PROPERTY INDEMNITY. Company makes no representation or warranty to the Customer that the Deliverables shall not infringe any intellectual property rights including, without limitations, claims arising from patent, copyright, trademark, trade secret, or other intellectual property infringement. Customer agrees to hold Company harmless from and defend the Company against any such claim of intellectual property infringement, including any Damages resulting from that claim, the cost of complying with any preliminary or permanent injunction, and all other costs of defense (including the attorneys’ fees and costs), in connection with the foregoing.c) To the extent that applicable law does not permit any limitations set out in this Agreement, such limitation shall not be applied or invoked. Nothing in this Agreement will be interpreted to disclaim liability of Company or the Indemnitees for gross negligence or willful misconduct. The limitations of remedy and liability herein shall not be interpreted to affect Company’s obligations, if any, for claims for (i) property damage, (ii) personal injury, or (iii) wrongful death asserted by persons who are not parties to or beneficiaries of this Agreement. Further, the limitations of remedy and liability herein shall not be interpreted to limit Company’s or Customer’s right, if permitted by applicable law, to assert a claim for contribution among joint tortfeasors in connection with a claim by a person who is not a party to this Agreement.

21. CERTIFICATIONS. Certification of Deliverables for compliance with UL and ANSI standards are tested and performed by third-party independent laboratories. Any field modification or alteration of certified Deliverables will void certification and Company is not liable to Customer to certify any modified or altered Deliverable.

22. TERM FOR CLAIMS. NO ACTION ARISING OUT OF ANY CLAIMED BREACH OF THIS AGREEMENT BY COMPANY MAY BE BROUGHT BY CUSTOMER MORE THAN ONE (1) YEAR AFTER THE CAUSE OF ACTION HAS ARISEN.

23. CONSUMER PRODUCTSWITH RESPECT TO “CONSUMER PRODUCTS” AS DEFINED UNDER THE MAGNUSON-MOSS WARRANTY ACT (“MMWA”), THE FOLLOWING STATEMENTS ARE MADE. (A) SOME STATES OR LOCAL LAWS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU; (B) IF ANY IMPLIED WARRANTY IS PROVIDED UNDER THE MMWA, IT IS LIMITED TO THE DURATION OF THE WARRANTY PROVIDED IN SECTION 18 ABOVE. (C) SOME STATES OR LOCAL LAWS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU; AND (D) THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE OR LOCATION TO LOCATION.

24. FORCE MAJEURE/EXCUSABLE DELAY. Any delay or failure of Company to perform its obligations hereunder will be excused to the extent that it is caused by an event or occurrence beyond Company’s control such as, by way of example and not by way of limitation, acts of God, acts by any governmental authority (whether valid or invalid), governmental laws and regulations not presently in effect, fires, floods, windstorms, explosions, riots, natural disasters, wars, sabotage, accidents, labor problems (including, without limitation, lockouts, strikes, and slowdowns) at Company’s facility, its source plant or their suppliers, inability to obtain power, material, labor equipment, or transportation, or court injunction or order. The delivery date will be extended for a time equal to that of the delay and the schedule for Company’s performance will be deemed adjusted to that effect.

25. ENTIRE AGREEMENT AND AMENDMENT. This Agreement, together with the attachments, exhibits, webpages, or supplements specifically referenced and incorporated herein, constitute the entire agreement between Company and Customer with respect to the matters contained herein and supersede all previous communications, representations, or agreements, either oral or written between Company and Customer. No agreement or understanding varying or expanding this Agreement will be binding upon either party unless it is in writing and signed by a duly authorized representative of each party hereto.

26. CONFLICTS. In the event of any conflict or inconsistency between the terms of any agreement, or any part of an agreement or the various documents (including, but not limited to, electronic documents) between Company and Customer, unless the parties agree otherwise in writing, the various components of the agreements shall be given the following precedence (in descending order of precedence): a) any master agreement or long term agreement between Company and Customer; b) any specific terms, conditions and/or warranties of the individual products or Deliverables; c) the terms and conditions of this Agreement, and d) any purchase order.

27. UNSATISFACTORY CREDIT/TERMINATION FOR INSOLVENCY OR DEFAULT. Customer shall furnish Company with statements evidencing Customer’s financial condition

as Company may, from time to time, reasonably request, and shall notify Company immediately of any and all events that may have a material adverse effect on Customer’s business or financial condition. If Company determines, in its sole discretion, that Customer’s financial condition or creditworthiness is inadequate or unsatisfactory, then in addition to Company’s other rights, Company may without liability or penalty, take any of the following actions: (i) modify the payment terms for any outstanding and/or future purchases; (ii) cancel any previously accepted orders; (iii) delay any further shipment of Deliverables to Customer; or (iv) any combination of the above.

Company may immediately terminate an order from Customer by giving written notice to Customer in the event of the happening of any of the following or any other comparable event: (i) insolvency of the Customer; (ii) filing of a petition in bankruptcy by or against the Customer; (iii) appointment of a receiver or trustee for the Customer; (iv) execution of an assignment for the benefit of creditors by the Customer, all of which will allow Company to demand reclamation of all affected orders; (v) Customer ceases or threatens to cease to trade; (vi) Company determines that Customer does not meet or no longer meets the credit requirements of Company or Customer’s credit account is closed; (vii) any Customer violation of law, specifically including, without limitation, those laws set forth in this Agreement.

In the event of termination in accordance with this section, Company will not be obligated to accept any existing or additional orders from Customer and Company will be released from its obligation to deliver under orders accepted prior to such termination. The rejection or termination of any order by Company will not entitle Customer to any termination or severance compensation, or to any payment in respect to any goodwill established by Customer, or render Company liable for damages on account of the loss of prospective profits, or on account of any loss, expenditure, investment or obligation incurred or made by Customer.

No action taken under this Section 27 by Company (nor any failure of Company to act under this Section 27) will constitute a waiver by Company of any of its rights to enforce Customer’s obligations, including the obligation of Customer to make payments as required under this Agreement. Upon termination of any order, all amounts owed by Customer to Company will become immediately due and payable, whether or not otherwise then due or payable.

28. CREDIT RISK ON RESALE OF DELIVERABLES. Customer is responsible for all credit risks with respect to, and for collecting payment for, all Deliverables sold to third parties (including End Users, installers, and/or general contractors) whether or not Customer has made full payment to Company for such Deliverables. The inability of Customer to collect payment for any Deliverable shall not affect Customer’s obligation to pay Company for any Deliverable.

29. GOVERNING LAW; VENUE; AND EXPENSES. Any dispute or claim relating to this Agreement shall be governed by and construed according to the laws of the State of Indiana (excluding its conflict of laws principles); and not by the provisions of the 1980 United Nations Convention on the International Sale of Goods. Any disputes or claims shall be instituted and maintained in the courts of the State of Indiana. Customer consents to the exercise of jurisdiction over it by such courts and agrees that Indiana is not an inconvenient forum for any action arising from or relating to this Agreement. Customer agrees to pay for all expenses (including, but not limited to, collection costs, court costs and attorneys’ fees) incurred by Company in enforcing the obligations of Customer under this Agreement.

30. RELATIONSHIP OF THE PARTIES. Nothing in this Agreement or any other document creates an employment, partnership, joint venture, or agency relationship between Company and Customer, including that of franchisee/franchisor. No party will have any power or authority to enter into any commitment on behalf of or otherwise bind the any other party on any matter. No employee of Customer will be deemed to be an employee of Company. If any provision of this Agreement is deemed to create a franchise relationship or business opportunity between the Parties, then Company may terminate any purchase order or this Agreement or the Parties shall negotiate in good faith to modify this Agreement so as to effect the original intent of the Parties as closely as possible in a mutually acceptable manner in order that the transactions contemplated hereby are consummated as a reseller agreement and not a franchise or business opportunity agreement.

31. SETOFF. Customer does not have the right to setoff or to back charge against any amounts which become payable to Company under this Agreement or otherwise. Company will not accept responsibility for backcharges for the cost of material or labor by Customer or any third party.

32. ELECTRONIC COMMUNICATIONS AND ELECTRONIC SIGNATURES. Both parties expressly agree to electronic transactions and acknowledge that documents they sign electronically will bind them to the same extent as a paper signature. Customer represents and warrants to Company that only employees authorized to bind Customer legally shall electronically sign any document under this Agreement. Customer shall comply with any method of electronic communication/payment processing specified by Company, including electronic funds transfer, pay-on-receipt processes/systems, order transmission, releases, electronic signature, and electronic communication systems, including, without limitation, the use of electronic data interchange (“EDI”) portals. Notwithstanding the foregoing, e-mails, even those containing a signature block of one of Company’s representatives, shall not constitute a signed writing.

33. COMPLIANCE WITH APPLICABLE LAWS. a. General. Company and Customer will comply with all applicable federal, state and municipal laws, regulations, codes, ordinances and orders that pertain to the Deliverables, including but not limited to full compliance with any applicable provisions of The Health Insurance Portability and Accountability Act. Where the Customer is located outside the United States, or where the customer intends to ship the product outside the United States, the Customer shall be responsible for compliance with all U.S. export laws, and for filing all U.S. Electronic Export Information, as applicable. b. The Customer acknowledges and agrees that: (i) it shall not violate applicable laws and regulations in performing its duties under this Agreement; (ii) it does not and shall not engage in any conduct that shall violate any applicable anti-bribery or anti-corruption laws or regulations; (iii) it (and its owners, officers, directors, employees and agents) shall not pay, offer, promise or authorize the payment of, either directly or indirectly, anything of value (including but not limited to cash, gifts and entertainment) to (a) any government official or employee of any government; (b) any official or employee of any department, agency, or instrumentality of a government; (c) any employee of any corporation or entity owned or controlled by a government; (d) any family member of such officials or employees; (e) any



Terms and Conditionspolitical party, party official, or political candidate; or (f) any other persons, owners, officers, directors, employees and agents of any corporation or entity; to improperly or illegally assist in obtaining or retaining business (including but not limited to any contracts, avoidance of duties or reduction of tariffs, reduction of taxes or to obtain money owed, or to obtain regulatory approval) or for the purpose of causing, soliciting or inducing the sale and purchase of the Deliverables by any party, and (iv) it has full knowledge of and will comply with the Company’s Code of Conduct for Business Partners as set forth on the Allegion customer website, WHICH IS HEREBY INCORPORATED BY REFERENCE. c. The Customer shall indemnify and hold the Company harmless from any claim, demand, expense or cost arising from any breach of this Article. d. The Customer shall permit the Company to conduct an audit or review of the Customer’s financial books and records and business operations at such other times that the Company considers it necessary to confirm compliance with this provision. Such audit may be conducted by representatives of the Company or, at the Company’s sole discretion, by a certified public accounting firm selected by the Company. The Customer shall cooperate with any inquiries from the Company’s Ethics & Compliance Group. e. A violation of this provision constitutes a material breach of this Agreement and the Company may terminate any purchase order or this Agreement immediately, with no opportunity to cure, in accordance with Section 27 of this Agreement.f. Notwithstanding the foregoing provisions of this Section 33, (i) Company is not responsible for obtaining or maintaining any permits for the performance of services or the verification or compliance with any code requirements relative to the performance of services, (ii) to the extent any sale of Deliverables pursuant to this Agreement may require approval of the U.S. Government, Company’s obligations under this Agreement are conditioned upon the grant of such approval and upon compliance by Customer with any restrictions imposed by the U.S. Government in connection with such approval, and (iii) in the event the Deliverables are to be used in a nuclear facility, the Customer shall, prior to such use, arrange for insurance or governmental indemnity protecting Company against liability. The Customer hereby releases and agrees to indemnify Company and its suppliers for any nuclear damage including, but not limited to, loss of use, in any manner arising out of the nuclear incident, whether alleged to be due, in whole or in part by Company or its suppliers. g. No Inducements. Each party represents to each other that neither it nor any person acting on its behalf has, in contravention of any applicable law, given or offered to give or will give or offer to give, any sum of money or other material consideration to any person, directly or indirectly, as an inducement to obtain business hereunder or to influence the granting of licenses or other governmental permissions to enter into this Agreement or perform obligations hereunder. h. Equal Employment Opportunity. Company is a U.S. federal contractor that complies with Executive Order 11246, as amended, and applicable regulations in 41 CFR Parts 60-1 through 60-60, 29 U.S.C. § 793 and applicable regulations in 41 CFR § 60-741; and 38 U.S.C. § 4212 and applicable regulations in 41 CFR Part 60-250 and 60-300. THE FOLLOWING PROVISIONS ARE INCORPORATED HEREIN BY REFERENCE: Executive Order 11246 and 41 CFR § 60-4.3(a); Executive Order 11701 and 41 CFR §§ 60-250.5(a), 60-300.5; Executive Order 11758 and 41 CFR § 60-741.5(a); U.S. immigration laws, including the L-1 Visa Reform Act of 2004 and the H-1B Visa Reform Act of 2004; and Executive Order 13496. i. Ethical Business Conduct. Customer shall adopt and comply with Company’s Business Partner Code of Conduct which is EXPRESSLY INCORPORATED HEREIN BY REFERENCE.

34. REPRESENTATIONS AND WARRANTIES. Customer represents, warrants and covenants to Company that: (a) it has the right, power, and authority to enter into this Agreement and fully perform its obligations hereunder; (b) it has all necessary rights in and to its respective Content and Marks for use within the scope of this Agreement, including the licenses granted herein; and (c) it complies, and at all times shall comply, with all laws, rules, and regulations in effect that are applicable to its performance under this Agreement, including obtaining all such approvals and/or permits as may be required hereunder.

35. NO THIRD-PARTY BENEFICIARY. Each party is entering into this Agreement solely based on the representations contained herein for its own purposes and not for the benefit of any third party.

36. NOTICES AND CHANGE OF ADDRESS. All notices or other communications under this Agreement shall be in writing and delivered in person, or sent by receipted courier, express mail, e-mail, or postage prepaid certified or registered mail, addressed to the party for whom it is intended, at the addresses set forth in this Agreement. Either party may change its address for notice by giving written notice to the other party. Any notice or other communication shall be deemed given no later than the date actually received. Notice by courier, express mail, certified mail, or registered mail shall be deemed given on the date it is officially recorded as delivered and, in the absence of such record of delivery, it shall be rebuttably presumed to have been delivered on the third Business Day after it was deposited. Notices sent by e-mail require tangible confirmation of receipt from addressee.

37. ASSIGNMENT. Customer may not assign this Agreement without the prior written consent of Company. Company may assign its rights and delegate its duties under this Agreement, without the prior consent of Customer, to an Affiliate, or to a third party in the event of a spin-off, merger, business combination, consolidation or sale of all, or substantially all, of its assets or business that are related to this Agreement. The rights and duties in this Agreement shall bind and inure to the benefit of any such assignee.

38. SEVERABILITY. If any provision of this Agreement is held to be invalid, illegal, or unenforceable under any statute, regulation, ordinance, executive order, or other rule of law, that provision will be deemed severed to the extent necessary to comply with such statute, regulation, ordinance, order, or rule. In the event such provision is deemed severed, the parties will negotiate in good faith to arrive at an alternative arrangement approximating the original business objective of the parties. The remaining terms and conditions of this Agreement will remain in effect.

39. NO IMPLIED WAIVER. The failure of either party at any time to require performance by the other party of any provision of this Agreement will in no way affect the right to require such performance at any time thereafter, nor will the waiver of either party of a breach of any provision of this Agreement constitute a waiver of any succeeding breach of the same or any other provision.

40. MISCELLANEOUS. (a) This Agreement does not make either party the agent or legal representative of the other party. Neither party is authorized to create any obligation on behalf of the other party including, but not limited to, the obligation for payment of any service or warranty obligation hereunder; (b) The rights and remedies herein reserved to Company are cumulative and additional to any other rights and remedies provided at law or equity; (c) The official text of this Agreement is in the English language. If this Agreement is

translated into another language, the English text will govern any question with respect to interpretation; (d) The headings in this Agreement are for convenience of reference only and do not affect the meaning of this Agreement in any manner.

DEFINITIONS.Capitalized terms have the meanings set forth in this Section, or in the Section in which they first appear in this Agreement. “Agreement” means these Allegion Terms and Conditions of Sale and Service, together with any applicable Country Supplement or Region Supplement provided by Company, and all of the documents referenced herein or therein.“Affiliate” means any Person that directly or indirectly, through one or more intermediaries, controls, is controlled by, or is under common control with, the Company. The term “control” (including the terms “controlled by” and “under common control with”) means the possession, directly or indirectly, of the power to direct or cause the direction of the management and policies of a Person, whether through the ownership of voting securities, by contract or otherwise. “Business Day” means any day except Saturday, Sunday or any other day on which commercial banks located in the United States are authorized or required by Law to be closed for business. “Company” means Schlage Lock Company, LLC or any subsidiary or affiliate thereof selling products that are part of the Allegion product portfolio. Schlage Lock Company and/or its subsidiary or affiliates will be severally but not jointly liable under the Agreement. “Company Marks” refers to the Marks of Company. “Confidential Information” shall mean any and all information provided by either party to the other party pertaining to the disclosing party’s business. Confidential Information shall include, but not be limited to, any bitting lists, formulae for products, manufacturing processes, production techniques, packaging processes, methods, research materials, ideas, marketing plans and related materials, quality standards, test results and data, apparatus, engineering drawings, contract documents, computer software, hardware, or firmware, business activities information such as financial information, reports, projections, books and records, customer and supplier information, and operations, customer and supplier lists and data, specifications, know how, and other Proprietary Information or Trade Secrets (as defined herein) that either party may furnish to the other party. Confidential Information shall not include information that: (a) is or becomes publicly known if such public knowledge or disclosure is not the result of any act or failure to act on the part of the receiving party; (b) is, at the time of disclosure, already known to the Receiving Party without utilizing the Confidential Information; (c) is information disclosed to the Receiving Party by a third party which is not to the Receiving Party’s knowledge, after inquiry of the third party, under a duty of confidentiality to the Disclosing Party; or (d) is independently developed by the Receiving Party without the use of Confidential Information. The Receiving Party shall have the burden of proof as to prior knowledge and absence of breach. Confidential Information may be furnished in any tangible or intangible form including, but not limited to, writings, drawings, computer and other electronic media, logic diagrams, component specifications, graphs, prototypes, samples, or verbal communications and regardless of whether such information is marked or designated as “confidential.” For the avoidance of doubt, all information, knowledge or data disclosed by Company to Customer, regardless of whether disclosed in written, tangible, oral, visual or other form, including, without limitation, sample products, equipment, software, or other objects or material, provided by Company to Customer, and all information, knowledge or data which was obtained by Customer from visits to Company’s facilities, shall be considered “Confidential Information” under this Agreement. “Content” means all information (including without limitation any text, music, sound, photographs, video, graphics, data or software), in any medium, on a particular Company Web page or Website or in Marketing Materials. “Customer” means the purchaser of Deliverables from Company. “Deliverables” means any good or service or both purchased by Customer from Company under these General Terms and Conditions of Sale and Service. “End Users” means the purchaser that (a) has acquired a Deliverable from Customer for (i) its own and its Affiliate’s/Affiliates’ internal use and not for resale, remarketing or distribution or (ii) incorporation into its own products and (b) is an individual or entity, other than any federal, state or local agency, office or division.“IP” means all intellectual property and industrial property rights comprising or relating to/of the following: (a) Patents; (b) Trademarks; (c) internet domain names, whether or not Trademarks, registered by any authorized private registrar or Governmental Authority, web addresses, web pages, website and URLs; (d) works of authorship, expressions, designs and design registrations, whether or not copyrightable, including copyrights and copyrightable works, software and firmware, application programming interfaces, architecture, files, records, schematics, data, data files, and databases and other specifications and documentation; (e) Trade Secrets; and (f) all other intellectual property and industrial property rights, and all rights, interests and protections that are associated with, equivalent or similar to, or required for the exercise of, any of the foregoing, however arising, in each case whether registered or unregistered and including all registrations and applications for, and renewals or extensions of, such rights or forms of protection pursuant to the Laws of any jurisdiction throughout in any part of the world.“Marketing Materials” means all marketing brochures, buckslips, pamphlets, emails, text, call scripts or other material, whether in printed format, audio or audiovisual format, or in any other format, that contain any (i) Content relating to the Company Deliverables or (ii) Company Marks. “Marks” means collectively the domain names, trademarks, trade names, service marks, trade dress, logos, and the like used or provided by either party for use in connection with this Agreement. “Patents” means all patents (including all reissues, divisionals, provisionals, continuations and continuations-in-part, re-examinations, renewals, substitutions and extensions thereof), patent applications, and other patent rights and any other Governmental Authority-issued indicia of invention ownership (including inventor’s certificates, petty patents and patent utility models). “Person” means a person or entity.“Price Books” mean Company’s current Price Book in effect for the applicable Deliverable being purchased by Customer. “Trade Secrets” means and includes business or technical information of either party, including processes, formulas, devices, techniques, compilations and other material that a party attempts to maintain in secret and that derive commercial value for such party from not being generally known to the public or readily ascertainable through independent development or reverse engineering.


Finishes

SPLIT FINISHES:When split finish is desired, the finish listed first is understood to be the finish on the trim/control on the outside of door.

TOUCHBAR TRIM FINISHES:When purchased as part of a device, optional touchbar trims are furnished at no additional charge. See device finish page for available finishes per device.

SPECIAL FINISHESOptional powder coat finishes available on 33A, 35A, 55, 88, 94, 95, 98, 99, XP98 and XP99 Series devices. To have a specific color matched and powder coat availability please contact:TIGER Drylac U.S.A., Inc.1100 Commons Blvd.Reading, PA 19605 USA800-243-8148www.tiger-coatings.us

Powder coat must be selected from Tiger Drylac Series 38 or 49.Please specify both the full powder coat product number and the RAL number when placing your order with Von Duprin. Example: 49/15320 RAL 1015

CUSTOM GRAPHICSCustom logo or unique artwork on push bar trim is available. Must provide a graphic file of artwork to be applied. The graphic should be native (not scaled) and must not exceed 16"x2". File format should be in Photoshop or .TIFF file format. The graphic file should be emailed to [email protected]. Contact customer care for more details. List add $90/device plus non-discountable $250 set-up charge per order.

SPECIAL FINISH PRICING33A, 35A, 94, 95, 98, 99, XP98, XP99 devices ......24% list add to US28 price55 and 88 devices ....................................................24% list add to US4 priceSteel Mullions ..........................................................24% list add to SP28 price 33/35/98/99 Series 313 Finish Device with US10B parts......................................................24% list add to 313 priceNote: On 98/99 devices the US10B parts include end caps, pushbar trim (if not brown), pushbar assy and center case cover.Note: On 33A/35A devices the US10B parts include end caps, pushbar trim (if not brown) and pushbar assy.Note: US10B pushbar trim finish will wear off. For other finishes not listed in this pricebook, consult factory for pricing.

ANTIMICROBIAL COATING Antimicrobial Coating available in US26D and US32D use suffix -AM when ordering, $55 list add.Contact the factory for other finishes in Antimicrobial Coating.

REFERENCE Devices ordered in US28 and US32D will be supplied with Trims in US26D unless SS levers are specified.

See device finish pages for available finishes offered for each device.BHMA US Description605 US3 Brass, Polished�� JH(6� 7gVhh!�Eda^h]ZY�"�cd�aVXfjZg606 US4 Brass, Satin�� JH)6� 7gVhh�HVi^c�"�cd�aVXfjZg611 US9 Bronze, Polished612 US10 Bronze, Satin613 US10B Bronze, Oil-Rubbed Satin619 US15 Nickel, Satin622 US19 Flat Black625 US26 Chrome, Polished626 US26D Chrome, Satin�� JH'+9"6B� �8]gdbZ!�HVi^c�lî]

Antimicrobial Coating

BHMA US Description 628 US28 Aluminum, Anodized 629 US32 Stainless Steel, Polished 630 US32D Stainless Steel, Satin� �� JH('9"6B� �HiV^caZhh�HiZZa!�HVi^c�lî]

Antimicrobial Coating 689 SP28 Aluminum, Sprayed 693 SPBLK Black, Painted 695 SP313 Sprayed Duranodic 710 313 Duranodic Dark Bronze 711 315 Black�� +)(:� 6\ZY�7gdcoZ� Consult factory for lead time.


Von Duprin Exit Devices

33A/35A, 94/95, 98/99 L-Lock ND AL S F/FA

01 01

02 02

03 03 Tubular

05 05

06 06 Rhodes Saturn Saturn Elan

07 07 Athens Jupiter Jupiter Jazz

12 12 Manhattan

17 17 Sparta Neptune Neptune

18 18

Latitude Latitude Latitude

Longitude Longitude

16 Omega Omega Omega

Asti Asti Flair Flair

Merano Merano Merano

Accent Accent Accent

St. Annes St. Annes St. Annes

Standard Lever Suites

Note: Table shows matching lever styles among brands for suiting purposes.


Von Duprin 98/99, 94/95, 33A/35ASchlage L, LT

M51

4.5”

2.5”

M52

4.5”

2.4”

M53*

4.4”

2.4”

M54

4.4”

2.3”

M55*

4.4”

2.7”

M56

4.5”

2.3”

M57*

4.5”

2.7”

M61 (handed)

4.5”

2.7”

M62*

4.6”

2.4”

M63 (handed)

4.6”

2.6”

M81

4.8”

2.5”

M82*

4.9”

2.5”

M83

4.7”

2.25 ”

M84

2.2”

5.1”

M85 (handed)

4.9”

2.7”

*Available April 2014

M Collection Levers

4.5"

2.7"

4.5"

2.7"

4.6"

2.6"

4.4"

2.3"

4.5"

2.5"

4.5"

2.4"

4.6"

2.4"

4.9"

2.5"

4.9"

2.7"

4.8"

2.5"

5.1"

2.2"

4.4"

2.7"

4.4"

2.4"

4.5"

2.3"

4.7"

2.25"


DOOR WIDTHSEXIT DEVICES for door widths exceeding 4'0" are custom applications. Door width is assumed 3'0" unless specified otherwise. Specify the exact door width and consult factory for price or see page 16.

DOOR THICKNESSEXIT DEVICES are furnished at prices listed for door thicknesses of 1-3/4" and 2-1/4" with standard centerlines. Other door thicknesses and/or offset installations may require additional charges for the device, trim, control and/or strike. Consult factory for price or see pages 14, 15 and 16.

DOOR HEIGHTS/DEVICE CENTERLINESURFACE VERTICAL ROD DEVICES are furnished at prices listed for door heights up to 7'0". For heights above 7'0", extension rods are furnished at prices shown on page 76. For doors higher than 10'0" or when centerline is other than standard, specify exact height and/or centerline. Consult factory for price or see device page. ADA centerline of 37" is available at no additional charge, must be specified. Door height is assumed 7'0" unless specified otherwise.

CONCEALED VERTICAL ROD DEVICES are furnished at prices listed for door heights 6'8" to 8'4" on touch bar devices, and up to 8'0" on crossbar devices. For extension rods up to 10'0", see page 76 for prices. For heights other than this or when centerline is other than standard, specify exact height. Consult factory for price or see device page. Door height is assumed 7'0" unless specified otherwise.

HANDINGDEVICES: Furnished RHR when handing is not specified.LEVER TRIMS: Trims are furnished RHR when handing is not specified.

CYLINDERSWe do not offer custom keying.

MARKING CARTONSMarkings (e.g., door locations, stock reference numbers) on acknowledgements and individual product cartons will be provided at $2.00 each net.

SUBSTITUTION OF OUTSIDE TRIM OR STRIKESWhen standard is not desired, deduct price of standard and add price of item used. Check catalog for compatibility.Refer to device Product Catalogs for specific door application strike requirements.

ELECTRIC ACCESSORIESWhen specifying Electrical Products, consult Product Catalog or factory to insure all required accessories have been specified.

PRODUCT CATALOGSRefer to the Product Catalogs for required accessories and specific requirements.

LEVER DESIGNS• The #06 lever is furnished standard. • Optional lever designs, #01, #02, #03, #05, #07, #12, #16, #17, #18, Accent, Asti, Merano and St. Annes are available at no additional charge.• Optional Stainless Steel levers, 03 SS, 06 SS, 17 SS, Latitude SS and Longitude SS are available at no additional charge.• Optional Brass levers, Latitude and Longitude are available at no additional charge.• Optional Knurled Levers available on #03 and #06 Lever designs, $81 list add. Levers #02 and #17 can be supplied Knurled as a Special,

$122 list each. Refer to Device pages for Levers offered per device.

General Information


How to OrderSequence Example 996/ 299F/ EL 98 27 L F — US26D 3’ RHR LBR US26D US26D 06 SNB HMPrefixes None Standard CD Cylinder Dogging - Panic Only CX Chexit E Electric Locking Mortise/Lever EL Electric Latch Retraction HH Huricane Device LX Latch Bolt Monitoring PL Pullman Latch PN Pneumatic Latch Retraction QEL Quiet Electric Latch Retraction

Device Series 22 Push Bar Device 33A/35A Push Bar Device 55 Cross Bar Device

Device Type None Rim Device 27 Surface Mounted Vertical Rod Device 47 Concealed Vertical Rod Device 47WDC Concealed Vertical Rod Wood Door Device 48 Concealed Vertical Rod Device 49 Concealed Vertical Cable Device (see CVC how to order form) 49WDC Concealed Vertical Cable Wood Door Device (see CVC how to order form) 57 Three-Point Latch Device 75 Mortise Lock Device

Trim Functions XX AD Trim (to come from client) DT Dummy Trim EO Exit Only HL Hospital Pull Trim K Knob K-BE Knob - Blank Escutcheon K-DT Knob, Rigid - Dummy Trim K-NL Knob, Rigid - Night Latch L Lever (Classroom) L-BE Lever - Blank Escutcheon L-DT Lever, Rigid - Dummy Trim

Rating F Fire Exit hardware

Hj[Ñm -2 Double Cylinder

Finish US3, US4, US10,US 15, US26, US26D, US28, US32D, 313, 315 -AM Antimicrobial (available US26D and US32D)

Door Width 3’ Standard Default 4’ 2’

Handing RHR Right Hand Reverse

Less Bottom Rod/Cable LBR Less Bottom Rod LBL Less Bottom Cable

Trim Options/Finish � HZZ�ig^b�dei^dch$Ñc^h]�[dg�ZVX]�hZg^Zh

Trim Options/Finish See trim options for each series

Lever Style 06 Standard Default Optional Levers available

Accessories CYL Cylinder GBK Glass Bead Kit SNB Sex Bolts

Other InformationTouchbar Options BRAILLE (Vision impaired touchpad, Raised letter, and Braille), PUSH (Touchbar trim embossed “PUSH’) RSS (Red silk-screened lettered touchbar trim), KN (Knurled Touchbar), SG (Safety Glow)UL Listing 20 (20 Minutes), 45 (45 Minutes / C Label), 60 (60 Minutes), 90 (90 Minutes / B Label), 180 (180 Minutes / A Label)Miscellaneous CE (CE Labeled), LCP (Less Cover Plate), 10WDA (#10WDA Cover Plate), RAT REL (Ratchet Release Assy), 10CABLE (10’ Cable), WH (Weep Holes)Door Material AL (Aluminum Door), HM (Hollow Metal), WD (Wood Door) , CP (Composite Door) CLAD2 (Insulclad - 1/2”), CLAD4 (Insulclad - 1/4”), SC (Steelcraft, HH Device Only)Door Application D (Double Egress), P (Pair of Doors) , S (Single Door)

CdiZ/�Cdi�Vaa�dei^dch�VgZ�a^hiZY#�Cdi�Vaa�dei^dch�VgZ�VkVâVWaZ�dc�Vaa�hZg^Zh#�HZZ�i]Z�heZX^ÑX�hZg^Zh�eV\Zh�[dg�XdbeaZiZ�dei^dch�VkVâVWaZ# Please contact customer care for questions.

RX Request to ExitRX2 Double Request to ExitSD Special Dogging - Panic

OnlySS Signal SwitchWS Windstorm (FEMA rated)

Surface Vertical Rod Exit Device

XP Heavy Protection - Rim

L-NL Lever, Rigid - Night LatchNL Night LatchNL-OP Night Latch Cylinder

Assembly, Optional PullTL Turn LeverTL-BE Turn Lever - Blank

EscutcheonTP ThumbpieceTP-BE Thumbpiece - Blank

Escutcheon

Blank Panic Exit Hardware

-2SI Double Cylinder with Security Indicator

LHR Left Hand Reverse

LBR-AFL LBR with Fire PinLBL-AFL LBL with Fire Pin

SEC Security ScrewsSLM SLM Blocking

Door Thickness 1-3/4” Standard2-1/4” Optional

88 Cross Bar Device 94/95 Recessed Device 98/99 Push Bar Device

Prices subject to change without notice.



Concealed Vertical Cable System(CVC) Order Form

**AL (NS, MS, WS)

Aluminum door classification by stile width. AL-NS - 2 1/8" - 2 3/4" AL-MS - 2 3/4" - 3 3/4" AL-WS - More than 3 3/4"

allegion.com/us



Door Thickness - Devices OnlyPrices shown are for a door thickness over 2-1/4" up to 4-1/4". Trims for a door thickness other than standard are priced separately on page 14.NOTE: Other special door and frame conditions may require additional charges. Consult factory for pricing.

Special Order Products

Model Description List Add Notes

22 Series22 SERIES No specials are available on the 22 Series. n/a

33A/35A Series33A/35A Rim, 33/3527/47/48A/-F Device 68 Special Screw Pack

55 Series55 Rim Device 68 Special Screw Pack5575/5575-F Mortise Device, Lock towards device (push) side 217 Special Device

Special Screw Package Special Trim (if not EO)

Mortise Device, Lock centered 417 Special Device Special Strike

Special Trim (if not EO)Mortise Device, Lock towards trim (pull) side 401 Special Device

5547/5547WDC/-F Concealed Vertical Rod Device 68 Special Screw Pack

88 Series88/88-F Rim device with sexbolts 68 Special Screw Pack8875/8875-F Mortise Device, Lock towards device (push) side 212 Special Device


Mortise Device, Lock centered 404 Special Device Special Strike

Special Trim (if not EO)Mortise Device, Lock towards trim (pull) side 186 Special Device

98/99 Series98/99/98-F/99-F Rim Device w/SNB 68 Special Screw Pack98/9927/-F Surface Vertical Rod 68 Special Screw Pack98/9947/48/-F Concealed Vertical Rod w/SNB 68 Special Screw Pack98/9947WDC/-F Concealed Vertical Rod 68 Special Screw Pack98/9975/-F Mortise Device Lock towards Device(Push) Side 217 Special Strike


Mortise Device Lock Centered 417 Special Device Special Strike

Special Trim (if not EO)Mortise Device Lock towards Trim(Pull) Side 192 Special Device

Location of Mortise Lock must be provided when ordering.

15


Price Book 1Effective March 3, 2014 • Rev. 3/14

Door Thickness - Trims OnlyPrices shown are for a door thickness over 2-1/4" up to 4-1/4". See specific product below for maximum door thickness. Devices for a door thickness other than standard are priced separately on page 14.NOTE: Other special door and frame conditions may require additional charges. Consult factory for pricing.


Model Description List Add Special Items Required

33A/35A Series Trim386DT and NL Dummy or Night Latch Trim 68 Screw Pack for Device388 Night Latch Cylinder Trim - 33A/35A 68 Screw Pack for Device550DT Dummy Trim 68 Screw Pack392-6 Dummy Trim 68 Screw Pack

55 Series Trim550DT Dummy Trim 68 Screw Pack555NL/556NL Night Latch Trim 68 Screw Pack555NL-CA/556NL-CA Night Latch Cylinder Assembly 68 Screw Pack110MD-NL/WD-NL Night Latch Cylinder Assembly 68 Screw Pack

88 Series Trim880EO, DT or NL Exit Only, Dummy or Night Latch Trim 68 Screw Pack880/608TP/TP-BE Thumbpiece, up to 3-1/4" 185 Thumbpiece

and Screw PackThumbpiece, over 3-1/4" up to 4-1/4" 310 Thumbpiece

and Screw Pack880/606K/K-BE/K-NL Knob, up to 4-1/4" 234 Spindle and Screw Pack880K-DT Knob Dummy 68 Screw Pack608DT or NL Dummy or Night Latch Trim 68 Screw Pack606K-DT Knob Dummy 68 Screw Pack

98/99 Series Trim990EO, DT or NL Exit Only, Dummy or Night Latch Trim 68 Screw Pack696/697DT or NL Dummy or Night Latch Trim 68 Screw Pack990/696/697TP/TP-BE Thumbpiece, up to 4-1/4" 191 Thumbpiece

and Screw Pack996K/K-BE/K-NL Knob 227 Spindle and Screw Pack996K-DT Knob Dummy 68 Screw Pack996EO Exit Only Plate 128 Screw Pack and Studs996L/L-BE Lever up to 4" 401 Finger and Studs996L-NL Night Latch Lever up to 4" 81 Studs996L-DT Lever Dummy up to 4" 81 Screw Pack110MD-NL/WD-NL Night Latch Cylinder Assembly 68 Screw Pack392-7 Dummy Trim 68 Screw Pack



Door Thickness - Controls OnlyPrices shown are for a door thickness over 2-1/4" up to 4-1/4". Devices for a door thickness other than standard are priced separately on page 14.NOTE: Other special door and frame conditions may require additional charges. Consult factory for pricing.

Door Width - Devices OnlyPrices shown are for a door widths over 4' up to 6'.


For Special Order Product Quotes: Email: [email protected] Fax: 1-877-730-6248

Model Description List Add Special Items Required

Controls360L/L-BE Lever, up to 2-3/4" 102 Tailpiece and Screw Pack360L-DT Lever Dummy 68 Screw Pack371L/LBE Lever 249 Cam and Screw Pack373L/L-BE Lever, up to 3-3/8" dr for 88L 68 Screw Pack

Lever, over 3-3/8" up to 4-1/4" for 88L 335 Spindle and Screw PackLever, up to 2-11/16" for 8827L 68 Screw PackLever, over 2-11/16" up to 4-1/4" for 8827L 335 Spindle and Screw PackLever, up to 3-5/8" for 8875L 68 Screw PackLever, over 3-5/8" up to 4-1/4" for 8875L 335 Spindle and Screw Pack

373L-DT Lever Dummy 68 Screw Pack375L/L-BE Lever, up to 3-5/8" for 5575L 68 Screw Pack

Lever, over 3-5/8" up to 4-1/4" for 5575L 335 Spindle and Screw Pack375L-DT Lever Dummy 68 Screw Pack378L/L-BE Lever 249 Cam and Screw Pack379L/L-BE Lever 335 Spindle and Screw Pack374T/T-BE Thumbturn 194 Rod Member and Screw Pack376T/T-BE Thumbturn 349 Rod Cam and Screw Pack376T-WDC/T-BE Thumbturn 349 Rod Member and Screw Pack377T/T-BE Thumbturn, 2" door 186 Rod Cam and Screw Pack377T/T-BE Thumbturn, over 2 1/4" dr 349 Rod Cam and Screw Pack

Model Description List Add Notes

33/35/98/99 Series> 4' up to 5' All finishes 167 Device will ship less label

33/35/98/99 Series> 5' up to 6' All finishes 231 Device will ship less label

55 or 88 Series> 4' up to 5' US26D or US26 206 Device will ship less label> 4' up to 5' US3, US4, US10, US10B, SPBLK 324 Device will ship less labelNote: Device will be supplied with a 49" reinforcement crossbar kit. Actual crossbar length is 54".

55 or 88 Series> 5' up to 6' US26D or US26 271 Device will ship less label> 5' up to 6' US3, US4, US10, US10B, SPBLK 390 Device will ship less label

Note: Device will be supplied with a 61" reinforcement crossbar kit. Actual crossbar length is 66".

17



Special Order ProductsList Add Notes

Special Device TypesModified New York Special - Lever at 45 13/16" 414 5547 Hollow

Metal Doors OnlyModified California Special - Centerline at 38" 399 5547WDC OnlyBalanced Door - 3' Device with 4' Mechanism Case 69 33/35/98/99 SeriesSuffix WH - Drainage (Weep) Holes in Mechanism Case 68 33/35/98/99 Series3' 33/35A device will have 5 holes - 6" spacing, 4' 33/35A device will have 7 holes - 6" spacing3' 98/99 device with have 4 holes - 6" spacing, 4' 98/99 device will have 6 holes - 6" spacing

Special Trims990 with 697 Pull 61999EO/996EO with cylinder hole 90

Special Electric Strike6221/6223/6226 with "A" Back Box 64

Special MullionAluminum Mullions >10' up to 11' 649 5654/5754Steel Mullions >10' up to 14' 435 1654/4754/4854/4954/9854/9954

Special Centerline (other than 39-11/16")Steel Mullion 76Aluminum Mullion 335ADA centerline height of 37" is available at no additional charge, must be specified.



22 Series Finish Chart

A. Center Case

C. Touch Bar

E. Mechanism End Cap

B. Touch Bar End

F. Mechanism

D. Cover

Standard Finishes

ColorUS Number

BHMA Number A, B, E

C - Touch Bar Trim Finishes D, F

Sprayed Aluminum SP28 689 (A) Powder Coat (B, E) Molded Plastic

Sprayed Aluminum SP28, 689

Powder Coat

Duranodic Dark Bronze

SP313 695 (A) Powder Coat (B, E) Molded Plastic

Powder Coat SP313, 695

Powder Coat

22 Series Sex Bolt Quantities

ApplicationSex Bolt 425

(Optional)

With 499 Strike 425 Sex Bolt

(Optional)

325 Sex Bolts For SV Latches

(Supplied) List Add

EO (exit only device) 6 8 4

$9.00 each Sex Bolt

NLOP Device with 110 MD/WD 6 8 4 EO Device with 230EO trim 2 4 4 K, KBE, DT or NL Device with 210 trim 2 4 4 L, LBE, TP or TPBE Device with 230 trim 2 4 4

Note: Sex bolts are supplied for use on wood and composite fire doors.

19



Series Option Summary 22EXIT HARDWAREType of Device 22 (Rim) 2227 (Surface Vertical Rod)

Function EO (Exit Only) DT (Dummy Trim) L (Lever-06 Standard) LBE (Lever-Blank Escutcheon)NL (Night Latch-Key Retracts) NLOP (Night Latch, Opt. Pull) K (Knob) KBE (Knob - Blank Escutcheon)TP (Thumbpiece) TPBE (Thumbpiece, Blank Escutcheon)

Rating None (Panic Exit Device) - F (Fire Exit Device)

Device Finish SP28 (Sprayed Aluminum) 313 (Duranodic Dark Bronze)

Device Length (Feet and Inches) 3' (3' Device for 2' 4" - 3' Door) 4' (4' Device for 2' 10" - 4' Door)

Device Handing: RHR (Right Hand Reverse) LHR (Left Hand Reverse)

Dogging Options LD (Less Dogging)

Device Options ALK (Standard Alarm Kit) PL (Include Pullman Latch) GBK (Include GBK) CYL (Include Cylinder)SEC (Include Security Screws) SNB (Include # of Sex Bolts) RX (Request to Exit) LX (Latchbolt Monitoring)

Rods For Surface Vertical Devices only LBR (Less Bottom Rod) LBRAFL (LBR with Aux. Fire Pin)

Strike Series LS (Less Strike) 299 (Standard Rim) 1439 (Opt. Rim) 260U (Opt. SV Flush Transom)260UF (Opt. SV Fire Flush Transom) 264 (Opt. Rim or SV) 299F (Std. SV Fire) 499F (Std. SV Fire LBR)1409, 1410, 1606, 1609 (Opt. Rim)

Bottom Strike Series LBS (Less Bottom Strike) 248L4 (Surface) 304L (Available 2nd Bottom Strike)

Strike Finish US10B (Satin Bronze-Oil Rubbed) US19 (Flat Black) US26D (Satin Chrome) US32D (Satin Stainless)SP313 (Dark Bronze) MD (Molydag)

Trim Options LT (Less Trim) 210 (Standard DT/NL/K Trim) 230 (Standard L/TP Trim)110WD-NL / 110MD-NL (Night Latch Cyl-WD door/MD door)

Trim Finish US10B (Satin Bronze-Oil Rubbed) US26D (Satin Chrome) US28 (Powder Coat Aluminum) 313 (Duranodic Dark Bronze)

Lever Styles 06 Lever Standard 03 (03 Lever) 06 (06 Lever - standard) 17 (17 Lever)

UL Listings 20 (20 Minutes) 45 (45 Minutes / C Label) 60 (60 Minutes) 90 (90 Minutes / B Label)180 (180 Minutes / A Label)

Misc CE (CE Labeled)

Door Material AL (Aluminum Door) HW (Hollow Metal) WD (Wood Door) CP (Composite Door)

Door Thickness 1.3/4 (1-3/4" Standard) 2 (2" Thickness) 2.1/4 (2-1/4" Thickness)

Door Application D (Double Egress) P (Pair of Doors) S (Single Door)



22 Series Devices3' Devices are priced complete with standard trim and strike(s), 4' add $11 list.Cylinders and sex bolts are not included in price unless noted.

EXIT HARDWARERim Devices SP28 Weight lbs.(Price includes 299 Strike) SP313 3' 4' Standard Trim22EO 421 11 14 �Ã22DT 470 12 16 210DT22NL 478 12 16 210NL22NL-OP 519 12 15 110MD/WD22K (includes cylinder) 642 13 16 210K22L 638 14 17 230L22TP 637 14 16 230TP

Surface Vertical Rod Devices (Price includes 299, 248L-4, 304L Strikes and Sex Bolts for Latches)

2227EO 719 16 17 Ã�2227DT 768 17 19 210DT2227NL 776 16 19 210NL2227NL-OP 817 17 18 110MD/WD2227K (includes cylinder) 940 16 21 210K2227L 936 16 21 230L2227TP 935 18 21 230TP

FIRE EXIT HARDWARERim Devices(Price includes 299F Strike for single door applications.) (For double door applications the 499F Strike will be supplied at an additional $80 list add.

22EO-F 525 12 14 Ã22NL-F 582 12 15 210NL22NL-OP-F 623 13 15 110MD/WD22K-F (includes cylinder) 746 13 16 210K22L-F 742 14 17 230L22TP-F 741 13 17 230TP

Surface Vertical Rod Devices (Price includes 299F, 304L Strikes and Sex Bolts for Latches)

2227EO-F 935 15 17 �Ã2227NL-F 992 17 18 210NL2227NL-OP-F 1033 16 18 110MD/WD2227K-F (includes cylinder) 1156 16 20 210K2227L-F 1152 16 21 230L2227TP-F 1151 18 21 230TP

Dogging Not for use with Fire Exit Hardware

PrefixLD Less Dogging for 22 Series Panic devices 35

Less Bottom RodSuffixLBR Available with UL Fire Label at no additional charge on 2227-F Devices.

LBR Devices must be ordered in pairs of Vertical Rod Devices.N/C

21



Series Finish Chart 33A/35A

A. Center Case

D. Cover Plate

B. Touch Bar End CapC. Touch Bar Trim


F. Mechanism Case

Standard Finishes

ColorUS Number

BHMA Number A, B, E C -Touch Bar Trim Finishes D, F

Bright Brass US3 605 (A) Buffed Anodized (Dull) (B, E) Bright Brass

Bright Brass US3, 605 Buffed Anodized

Satin Brass US4 606 (A) Anodized (B,E) Bright Brass

Satin Brass US4, 606 Anodized

Satin Bronze US10 612 Plated/Anodized Satin Bronze US10, 725 AnodizedSatin Nickel US15 619 Plated, Clear Powder Coat Satin Stainless Steel US32D, 630 Anodized Polished Chrome US26 625 Plated Bright Stainless Steel US32, 629 Buffed Anodized Satin Chrome US26D 626 Plated Satin Stainless Steel US32D, 630 Anodized Anodized Aluminum

US28 628 (A, B) Anodized (E) Plated

Satin Stainless Steel US32D, 630 Anodized

Duranodic Dark Bronze

313 710 Powder Coat Powder Coat 313, 710 Powder Coat

Black 315 711 Powder Coat Powder Coat 315, 711 Powder Coat

US15 available on 35A only

Special Finishes

ColorUS Number


Bright Bronze US9 611 Plated Bright Bronze US9, 611 Buffed Anodized Satin Bronze, Oil-Rubbed

US10B 613 (A) Powder Coat (B, E) Oil-Rubbed

Oil Rubbed, US10B Powder Coat

Aged Bronze, 643EÃ" Ã" (A) Aged Bronze, No Relief (B, E) Relieved Aged Bronze

Relieved Aged Bronze Aged Bronze No Relief

Satin Chrome, Antimicrobial

US26D-AM 626AM AM Clear over Chrome AM Clear over Satin Stainless Steel US32D, 630

AM Clear over Anodized

Powder Coat RAL # * Ã" Powder Coat Satin Stainless Steel US32D, 630 (unless specified to match device)

Powder Coat

* See Finish page for optional RAL color information.

33A/35A Series Sex Bolt Quantities

Application425 Sex Bolts

(Supplied)For Latches 325 Sex Bolts

(Supplied)

EO (exit only device) 2 4DT device with 550 trim 2 4NLOP device with 388 trim 2 43327A or 3347A TLOP with 374T trim 2 2



33A/35A Series Option SummaryEXIT HARDWAREType of Device 33A (Grooved) / 35A (Smooth) None (Rim) 27A (Surface Vertical Rod) 47A / 48A (Concealed Vertical Rod) 49A (Concealed Vertical Cable)

Function EO (Exit Only) DT (Dummy Trim) L (Lever-06 Standard) LDT (Lever-Dummy Trim)NL (Night Latch-Key Retracts) NLOP (Night Latch, Opt. Pull) TLOP (Turn Lever, Opt. Pull) TL (Turn Lever)LBE (Lever-Blank Escutcheon) TLBE (Turn Lever - Blank Escutcheon) T (Thumbturn) TBE (Thumbturn - Blank Escutcheon)


Device Finish US3 (Bright Brass) US4 (Satin Brass) US10 (Satin Bronze) US26 (Bright Chrome)US26D (Satin Chrome) US28 (Anodized Aluminum) 313 (Duranodic Dark Bronze) 315 (Black)US26D-AM (Antimicrobial) US15 (Satin Nickel - 35 series only)

Device Length (Feet and Inches) 2' (2' Device for 2' Door) 3' (3' Device for 2' 4" - 3' Door) 4' (4' Device for 2' 10" - 4' Door)

Device Handing RHR (Right Hand Reverse) LHR (Left Hand Reverse)

Touch Bar Trim Options SS (Emergency Exit- US32D only) EMB (Embossed - Push) SG (Safety Glow) KN (Knurled) BR (Braille)WH ( Drainage/Weep holes in Mechanism Case - 3' device will have 5 holes - 6" spacing, 4' device will have 7 holes - 6" spacing)

Touch Bar Finish US3 (Bright Brass) US4 (Satin Brass) US10 (Satin Bronze) US10B (Satin Bronze-Oil Rubbed)US32 (Bright Stainless)340 (Photoluminescent)

US32D (Satin Stainless) 313 (Duranodic Dark Bronze) 315 (Black)

Dogging Options CD (Cylinder Dogging - Panic Only) HD (EL Hex Dogging) LD (Less Dogging)

Switch Options LX (Latchbolt Monitoring) LXLC (LBM Low Current) RX (Request to Exit) RXLC (Request to Exit Low Current)RX2 (Request to Exit Double Switch) LXRX (LBM Request to Exit) LXRXLC (LBM Request to Exit Low Current)

Electric Options EL (Electric Latch Retraction) SS (Signal Switch) QEL (Quiet Electric Latch Retraction)PN (Pneumatic Latch Retraction) ES (Pullman Latch for Electric Strike)

Device Options CX (Chexit - Controlled Exit) CXR (CX-RCM) HH (Hurricane) CYL (Include Cylinder)FSE (Fail Secure) PL (Include Pullman Latch) FS (Fail Safe) GBK (Include GBK)ALK (Standard Alarm Kit) SEC (Include Security Screws)

Rods For Surface / Concealed Vertical Devices only OPR (1 piece Top Rod) LBR (Less Bottom Rod) LBRAFL (LBR with Aux. Fire Pin)

Strike Series LS (Less Strike) LTS (Less Top Strike) 1439 (Std. Rim) 249 (Std. CVC)260U (Opt. SV Flush Transom) 260UF (Opt. SV Fire Flush Transom) 264 (Opt. Rim or SV) 266 (Std. SV)283 (Opt. CV - Wood Frame) 299, 1410, 1606, 1609 (Opt. Rim) 299F (Std. SV Fire) 338 (Std. CV)499F (Std. SV Fire LBR)

Bottom Strike Series LBS (Less Bottom Strike) 248L4 (Surface) 304L (Mortise) 349 (Std. CVC)385A (Adjustable Mortise)

Strike Finish US3 (Bright Brass) US4 (Satin Brass) US10 (Satin Bronze) US10B (Satin Bronze-Oil Rubbed)US19 (Flat Black) US26 (Bright Chrome) US26D (Satin Chrome) US32 (Bright Stainless)US32D (Satin Stainless) MD (Molydag) SP313 (Dark Bronze) SP10 (Satin Bronze)

Trim Options LT (Less Trim) 386 (Standard DT / NL Trim) 550 (Opt. Offset Dummy Trim) 392-6 (Opt. Wire Pull Dummy Trim)

388 (Night Latch Cylinder Trim)

Trim/ControlFinish US3 (Bright Brass) US4 (Satin Brass) US10 (Satin Bronze) US10B (Satin Bronze-Oil Rubbed)US26 (Bright Chrome) US26D (Satin Chrome) SPBLK (Black Painted) US26D-AM (Antimicrobial)

23



APPLICATION NOTE FOR 2' DEVICE :Available on Surface and Concealed Vertical (panic and fire).When vertical rod devices are used on both doors of a pair, operation of the inactive door (smaller door) will not disengage the active door, creating a potential safety issue for those using the inactive door during an emergency. In addition, standard hex or cylinder dogging is not available. Dogging is not available for this application on 33/3527A/47A devices.For pairs of doors using one 2' door Von Duprin recommends the following hardware combinations listed below for optimum safety in an emergency.1. Surface or Concealed Vertical device on the 2' door (inactive) and a mortise device on the larger door (active). This combination is used primarily on

Hollow Metal door applications only.2. Automatic Flush Bolt on the 2' door (inactive) and a Surface or Concealed Vertical device on the larger door (active).

NOTE: The 2' door width is not available with any Electrical, Chexit, Hurricane or Windstorm options.

(continued) Series Option Summary 33A/35AControl OptionsLC (Less Control) 360 (Lever Control) E360 (360 Elec. Unlocking) 360T (Thumbturn Control - Rim)E360T (360T Elec. Unlocking) 374T (Thumbturn Control - SV) 376T (Thumbturn Control - CV) 376T WDC (376T for Wood Door)

Control Lever Styles 06 Lever Standard ACC (Accent Lever) AST (Asti Lever) MER (Merona Lever) STA (St. Anne Lever)03K (03 Knurled Lever) 06K (06 Knurled Lever) 01, 02, 03, 05, 06, 07, 12, 16, 17, 18 (Levers)LAT (Latitude) LON (Longitude) 03 SS, 06 SS, 17 SS, LAT SS, LON SS, M57, M62 (Stainless Steel Levers)M51, M52, M53, M54, M55, M56, M61, M63, M81, M82, M83, M84, M85

Electric / Monitor Strike OTH (Other Mfg Strike) 4263T1 (Rim Monitor Strike) 4268T1 (Rim Monitor Strike) 4690T2 (For 33/3547A-F)4690-1T2 (for 33/3547A Non - Fire) 6111 (Rim W/Mull 33/3527A LBR) 6112 (33/35A Rim single door) 6113 (33/35A Rim single door)6114 (33/35A Rim NL function) 6121 (33/35A Rim Double Door no Mullion) 6213 (Used with 33/3547A LBR)

Delay B15 (BOCA 15 Second Delay) 0 (0 Second Delay) 15 (15 Second Delay)

UL Listings 0 (0 Minutes) 20 (20 Minutes) 45 (45 Minutes / C Label) 60 (60 Minutes)90 (90 Minutes / B Label) 180 (180 Minutes / A Label)

Misc CE (CE Labeled) LCP (Less Cover Plate) 10WDA (#10WDA Cover Plate) 33A (33A-WDA Cover Plate )

Door Material AL (Aluminum Door) HM (Hollow Metal) WD (Wood Door) CP (Composite Door) CLAD2 (Insulclad - 1/2") CLAD4 (Insulclad - 1/4")



Mullion Application 1654 (HM, used w/ 2 - 1606 Strikes) 4754 (HM, used w/ 2 - 4263 Monitor Strikes) 5654 (AL, used w/ 2 - 299 Strikes)4954 (HM, used w/2 - 299/264 Strikes) 4854 (HM, used with a 299 & 6111ES) 5754 (AL, 1408 Strike Installed)

24



3' Devices are priced complete with standard trim, strike(s) and sex bolts.2' add $75 list (Vertical Devices Only), 4' add $18 list. Cylinders are not included in price.

33A/35A Series Devices

EXIT HARDWARERim Devices US3/3A

US15 US26 �643E

(Price includes 1439 Strike) Weight lbs. Standard

Trim/ControlUS26D US28 313 US10 US4/4A 315 2' 3' 4'33A/35A-EO 1378 1115 1214 1156 1156 1445 1736 - 12 14 Ã33A/35A-DT 1646 1383 1482 1533 1424 1762 2004 - 15 18 386DT33A/35A-NL 1851 1588 1687 1741 1629 2004 2209 - 16 18 386NL*33A/35A-NL-OP 1610 1347 1446 1494 1373 1677 1968 - 15 16 38833A/35A-L 1920 1657 1756 1727 1626 2034 2278 - 17 19 360L**33A/35A-TL 1942 1679 1778 1750 1642 2056 2300 - 17 19 360T**33A/35A-T 1942 1679 1778 1750 1642 2056 2300 - 17 19 360T**

Surface Vertical Rod Devices(Price includes 266, 248L-4 and 304L Strikes)

33A/3527A-EO 1837 1568 1748 1628 1620 1909 2291 13 16 19 Ã33A/3527A-DT 2105 1836 2016 2005 1888 2226 2559 16 19 22 386DT33A/3527A-NL 2310 2041 2221 2213 2093 2468 2764 17 20 23 386NL*33A/3527A-NL-OP 2069 1800 1980 1966 1837 2141 2523 17 19 21 38833A/3527A-L 2379 2110 2290 2199 2090 2498 2833 16 19 22 360L**33A/3527A-TL 2669 2400 2580 2599 2374 2837 3123 19 22 25 386DT/374T**33A/3527A-T 2401 2132 2312 2222 2106 2520 2855 19 22 25 360T**

Concealed Vertical Rod Devices(Price includes 338 and 385A Strikes)


For Hollow Metal doors


* The 386NL series trim is handed and not field reversible. Please specify handing, RHR or LHR.** When applying to wood doors, 33A-WDA cover plate will be supplied at an additional $39 list add.

US15 finish available on series 35A only.




US15 finish available on series 35A only.� Consult factory for lead time.

25



FIRE EXIT HARDWARESurface Vertical Rod Devices US3/3A

US15 US26 �643E

(Price includes 299F and 304L Strikes) Weight lbs. Standard

Trim/ControlUS26D US28 313 US10 US4/4A 315 2' 3' 4'33A/3527A-EO-F 1898 1606 1802 1673 1660 1977 2331 13 16 19 Ã33A/3527A-NL-F 2371 2079 2275 2258 2133 2536 2804 17 20 23 386NL*33A/3527A-NL-OP-F 2130 1838 2034 2011 1877 2209 2563 13 16 19 38833A/3527A-L-F 2440 2148 2344 2244 2130 2566 2873 16 19 22 360L**33A/3527A-TL-F 2730 2438 2634 2644 2414 2905 3163 18 22 25 386DT/374T**33A/3527A-T-F 2462 2170 2366 2267 2146 2588 2895 18 22 25 360T**

* The 386NL series trim is handed and not field reversable. Please specify handing, RHR or LHR. ** When applying to wood doors, 33A-WDA cover plate will be supplied at an additional $39 list add.


* The 386NL series trim is handed and not field reversable. Please specify handing, RHR or LHR.** When applying to wood doors, 33A-WDA cover plate for 360 series and 10WDA for 370 series controls will be supplied at an additional $39 list add.US15 finish available on series 35A only.� Consult factory for lead time.


33A/3547A-EO-F 1967 1680 1854 1761 1761 2037 2388 14 16 18 Ã33A/3547A-NL-F 2440 2153 2327 2346 2234 2596 2861 18 20 22 386NL*33A/3547A-NL-OP-F 2199 1912 2086 2099 1978 2269 2620 14 16 18 38833A/3547A-L-F 2509 2222 2396 2332 2231 2626 2930 16 19 22 360L**33A/3547A-TL-F 2799 2512 2686 2732 2515 2965 3220 20 22 24 386DT/376T**33A/3547A-T-F 2531 2244 2418 2355 2247 2648 2952 20 22 24 360T**

For Hollow Metal doors

33A/3548A-EO-F 2202 1915 2089 1996 1996 2272 2623 14 16 18 Ã33A/3548A-NL-F 2675 2388 2562 2581 2469 2831 3096 18 20 22 386NL**33A/3548A-NL-OP-F 2434 2147 2321 2334 2213 2504 2855 14 16 18 38833A/3548A-L-F 2744 2457 2631 2567 2466 2861 3165 16 19 22 360L*** 33A/3548A-TL-F 3034 2747 2921 2967 2750 3200 3455 20 22 24 386DT/376T*** 33A/3548A-T-F 2766 2479 2653 2590 2482 2883 3187 20 22 24 360T**

(continued) Series Devices 33A/35A3' Devices are priced complete with standard trim, strike(s) and sex bolts.

2' add $75 list, 4' add $18 list. Cylinders are not included in price.

26



EXIT HARDWAREConcealed Vertical Cable Devices US3/3A

US15 US26 �643E

(Price includes 249 and 349 Strikes) Weight lbs. Standard

Trim/ControlUS26D US28 313 US10 US4/4A 315 2' 3' 4'33A/3549A-EO 1979 1661 1842 1736 1736 2051 2412 12 16 18 Ã33A/3549A-DT 2247 1929 2110 2113 2004 2368 2680 16 19 22 386DT33A/3549A-NL 2452 2134 2315 2321 2209 2610 2885 18 20 22 386NL*33A/3549A-NL-OP 2211 1893 2074 2074 1953 2283 2644 17 19 21 38833A/3549A-L 2521 2203 2384 2307 2206 2640 2954 16 19 22 360L33A/3549A-T 2543 2225 2406 2330 2222 2662 2976 20 22 24 360T

FIRE EXIT HARDWAREConcealed Vertical Cable Devices(Price includes 249 and 349 Strikes)

33A/3549A-EO-F 2079 1761 1942 1836 1836 2151 2512 14 16 18 Ã33A/3549A-NL-F 2552 2234 2415 2421 2309 2710 2985 18 20 22 386NL*33A/3549A-NL-OP-F 2311 1993 2174 2174 2053 2383 2744 14 16 18 38833A/3549A-L-F 2621 2303 2484 2407 2306 2740 3054 16 19 22 360L33A/3549A-T-F 2643 2325 2506 2430 2322 2762 3076 20 22 24 360T

* The 386NL series trim is handed and not field reversible. Please specify handing, RHR or LHR.US15 finish available on series 35A only.

* The 386NL series trim is handed and not field reversible. Please specify handing, RHR or LHR. US15 finish available on series 35A only.

Other Door Opening Heights up to 10'0" are available with extended lead time. � Consult factory for lead time.

For Concealed Vertical Cable Devices - Less Cable System (LCS) Deduct $846 List

Standard Door Opening Height

Cable Part Number Min-Max opening heights by stile width

Feet Inches Top Bottom

Hollow Metal/ Wide-

Stile Al. (greater than

3-3/4" stile width)

Medium-stile Al.

(2-3/4" - 3-3/4")

Narrow-stile Al.

(2-1/8" - 2-3/4")

6'8" 80" 49CABLE.1033 49CABLE.1038 77-1/2" - 80-1/2" 78-1/2" - 80-1/2" 79-1/2" - 80-1/2"

7' 84" 49CABLE.1034 49CABLE.1039 81-1/2" - 84-1/2" 82-1/2" - 84-1/2" 83-1/2" - 84-1/2"

7'2" 86" 49CABLE.1022 49CABLE.1040 83-1/2" - 86-1/2" 84-1/2" - 86-1/2" 85-1/2" - 86-1/2"

8' 96" 49CABLE.1035 49CABLE.1041 93-1/2" - 96-1/2" 94-1/2" - 96-1/2" 95-1/2" - 96-1/2"

9' 108" 49CABLE.1036 49CABLE.1042 105-1/2" - 108-1/2" 106-1/2" - 108-1/2" 107-1/2" - 108-1/2"

10' 120" 49CABLE.1037 49CABLE.1043 117-1/2" - 120 1/2" 118-1/2" - 120 1/2" 119-1/2" - 120 1/2"

Door Opening Heightis measured from finished floor

to frame rabbet on door side.

3' Devices are priced complete with standard trim, strike(s) and sex bolts where shown. 2' add $75 list, 4' add $18 list. Cylinders are not included in price.

For Concealed Vertical Cable Devices prices shown are for Door Opening Heights 6'8" to 8'4" For Door Opening Heights 8'5" to 10' add $57 listDoor opening height must be specified when placing an order.

33A/35A Series Devices

27



Cylinder Dogging(Not for use with Fire Exit Hardware)

Prefix List Add

CD Standard Baseplate Cylinder Dogging 75LD Less Dogging 35

Pneumatic DevicesPrefix List Add

PN Pneumatic 1136Accessories Order Part Number Each PricePNT-1 Pneumatic Power Transfer 012014-36 497PN Connector Pneumatic Connector 051827-00 31PN Tubing 25' length 051828-00 20

50' length 051823-00 27100' length 051824-00 45200' length 051825-00 85

Less Bottom Rod or Bottom LatchSuffix

LBR Available with UL Fire Label at no additional charge on 33/3527A-F and 33/3547A-F Devices. LBR devices must be ordered in pairs of vertical rod devices.

NC

Each PriceLBR KIT Fire Latch Kit, auxiliary bolt field replacement kit. Order part number 050171 354

DeductLBL Less bottom latch available on 33/3549A and 33/3549A-F with UL Fire Label

(LBL Only)101

List Add33/3549A-F devices must be ordered in pairs of vertical latch devices with one Fire Pin Kit per pair. LBL w/Fire Pin Kit

20

List Price49 Fire Pin Kit 49 Fire Pin Kit, complete auxiliary bolt field replacement kit.

Order part number 051860-32121

Optional Pushbar TrimSuffix List Add

BRAILLE Vision Impaired Touchpad, Raised Letters and Braille (US32D) Specify handing, RHR or LHR. Standard reads "Caution Stairwell." Optional up to 20 alpha / numeric characters on single line, consult factory.

97

"PUSH" Brass, Bronze and Stainless Touchbar trims embossed "PUSH". Specify handing, RHR or LHR. No additional charge when specified with device.

NC

RSS Red Silkscreened Touchbar trims (Standard on SS devices). "Emergency Exit Only, Push to Open and Sound Alarm" No additional charge when specified with device. Specify handing, RHR or LHR.

NC

KN Knurled Touchpad No additional charge when specified with device. NCSG Safety Glow feature - for 3' device 350

Safety Glow feature - for 4' device 364WH Drainage (Weep) Holes in Mechanism Case

3' device will have 5 holes - 6" spacing, 4' device will have 7 holes - 6" spacing.68

(continued) Device Options 33A/35A



Insulclad or Applied Panel(Not available for fire door applications)

Suffix List Add INS-2 1/2" Panel - for 33/3547A devices. Order part number 050399 52

INS-4 1/4" Panel - for 33/3547A devices. Order part number 050398 52 INS-2-KIT-33/3549A 1/2" Panel - for 33/3549A devices. Order part number 24122277 52 INS-4-KIT-33/3549A 1/4" Panel - for 33/3549A devices. Order part number 24122293 52

Electric Latch Retraction(available on all 33A/35A Series Devices unless noted)

Prefix List Add EL Electric Latch Retraction 709 QEL Quiet Electric Latch Retraction 853 HD-EL Electric Latch Retraction with Hex Dogging feature (Panic Only) 709 EL Conversion Kit - 3' / 4' Order part number 050070 / 050078 709 HD-EL Conversion Kit - 3' / 4' Order part number 050384 / 050385 709 QEL Conversion Kit - 3' / 4' Order part number 24179244 / 24179251 853 QEL Replacement Kit Order part number 24179269 813

Switches(available on all 33A/35A Series Devices)

Prefix List Add RX Request to Exit 191� WP-RX Waterproof Request to Exit 276 RX-LC Request to Exit Low Current 222 RX-2 Request to Exit Double Switch 238 RX-AUX RX to RX-2 Conversion - Order part number 050271. 199* LX Latchbolt Monitoring 191* LX-LC Latchbolt Monitoring Low Current 222* LX-RX Request to Exit / Latchbolt Monitoring combination 290* LX-RX-LC Request to Exit / Latchbolt Monitoring combination Low Current 346 SS Signal Switch - for Rim and Vertical Rod Devices 392 � Consult factory for lead time. * For 33/3549A, LX switch monitors trim input or electric dogging of EL/QEL devices. LX switch does not monitor latch condition. See page 82 for field-installed switch kit part numbers.

Pullman Latches(Not for use with Fire Exit Hardware)

Prefix List Add PL 33A/3527A Device PL Top and PL Bottom 197

33A/3547A Device PL Top and PL Bottom 278 ES 33A/3527A Device LBR with PL Top Latch for electric strike application. 99

33A/3547A Device LBR with PL Top Latch for electric strike application. 139NOTE: A Panic LBR device is one point latching not two point. Security of the opening may be compromised.

33A/35A Device Options(continued)

29



Chexit(available on 33A/35A Rim Series Devices Only)

Prefix List AddCX Chexit – Controlled Exit Device (15 Second Delay furnished standard)

DT Function requires an electric strike to access opening.L Function requires the E360L-BE

1454

CX Options: RCM Remote Chexit Module 211

* RCM KIT-33A Less Module - specify part number 050376 and finish. 211 * RCM KIT-35A Less Module - specify part number 050375 and finish. 211 0 Delay 0 Second Delay 107** 30 Delay 30 Second Delay 107 BOCA-15 Delay 15 second delay with BOCA Modification 107** BOCA-30 Delay 30 second delay with BOCA Modification 107** Other Delays 2-60 Seconds in 2 Second Intervals or infinite delay 142

* 15 second Module sold separately, specify part number 050228. ** Infinite Delay and OVER 15 second delay requires a letter of approval from authority having local jurisdiction. Send letter with sales order.

Order cannot be processed without the letter.

49 Cable System(Device Type and Door Opening Height must be specified when ordering)

Prefix Suffix List PriceCS Complete Cable System Door Opening Heights -

6'8" to 8'4"846

Includes: Top and Bottom Strikes, Latches, Centerslides, Cables and Mounting Packs

Door Opening Heights - 8'5" to 10'0" 907

CS LBL Cable System - Less Bottom Latch Door Opening Heights - 6'8" to 8'4" 745Includes: Top Strike, Top Latch, Top Cable, Centerslides, Mounting Packs


CS LBL - 49AFL Cable System - Less Bottom Latch - with Fire Pin Kit Door Opening Heights - 6'8" to 8'4" 876Includes: Top Strike, Top Latch, Top Cable, Centerslides, Mounting Packs and Fire Pin Kit


(continued) Device Options 33A/35A



A. Center Case Cover

B. Lever Arm

End Case

C. Cross Bar

Standard Finishes

Color US NumberBHMA Number A, B C

Bright Brass US3 605 Buffed Brass, Clear Coat Buffed Brass, Clear CoatSatin Brass US4 606 Satin Brass, Clear Coat Satin Brass, Clear CoatSatin Bronze US10 612 Plated, Clear Coat Plated, Clear CoatSatin Bronze, Oil-Rubbed US10B 613 Oil-Rubbed Oil-RubbedPolished Chrome US26 625 Plated Bright Stainless Steel US32, 629Satin Chrome US26D 626 Plated Satin Stainless Steel US32D, 630Satin Chrome - Antimicrobial US26D-AM 626 AM Clear over Chrome AM Clear over Stainless

Special Finishes

Color US NumberBHMA Number A, B C

Bright Brass - no Lacquer US3A Ã Buffed Brass Bright Brass US3ASatin Brass - no Lacquer US4A Ã Satin Brass Satin Brass US4AAged Bronze 643E Ã Aged Bronze, Relieved Aged Bronze, no ReliefPainted Black SPBLK Ã Painted Painted Black, SPBLK



(Supplied)

55 and 5547WDC 45547 and 5575 25547 EO, DT, NL on Wood Door 4

55 Series Finish Chart

31



Series Option Summary 55EXIT HARDWAREType of Device None (Rim) 5547 (Conc. Vertical) 5547WDC (Conc. Vert. WD) 5575 (Mortise Lock, FS or FSE)

Function EO (Exit Only) DT (Dummy Trim) L (Lever-06 Standard) LDT (Lever-Dummy Trim)NL (Night Latch-Key Retracts) NLOP (Night Latch, Opt. Pull) TLOP (Turn Lever, Opt. Pull) TL (Turn Lever)LBE (Lever-Blank Escutcheon) TLBE (Turn Lever - Blank Escutcheon)


Device Finish US3 (Bright Brass) US4 (Satin Brass) US10 (Satin Bronze) US26 (Bright Chrome)US26D (Satin Chrome) US10B (Satin Bronze-Oil Rubbed)


Cross Bar OptionsRE (Reinforced Crossbar) KN (Knurled)

Switch Options RX (Request to Exit)

Electric Options E (Electric Locking- Mortise, FS or FSE) ES (Pullman Latch for Electric Strike)

Device Options CYL (Include Cylinder) SLM (Include SLM Blocking)

Rods For Concealed Vertical Devices only LBR (Less Bottom Rod)

Strike Series LS (Less Strike) LTS (Less Top Strike) 1409 (Std. 55 Rim) 472U (Opt. 5547WDC 1-3/4)473U (Opt. 5547WDC 2-1/4) 264 (Opt. Rim or SV) 471U (Std. CV 5547) 575 (Std. 5575 Mortise)299, 1410, 1606, 1609 (Opt. Rim) 575-2 (Opt. 5575 Mortise) 338 (Std. CV 5547) 576A (Opt. 5575 1-3/4)576B (Opt. 5575 2-1/4)

Bottom Strike Series LBS (Less Bottom Strike) 301L (Standard 5547-F ) 304L (Standard 5547) 385A (Optional)

Strike and Mortise Finish US3 (Bright Brass) US4 (Satin Brass) US10 (Satin Bronze) US10B (Satin Bronze-Oil Rubbed)US19 (Flat Black) MD (Molydag) SP313 (Dark Bronze) US32 (Bright Stainless)US32D (Satin Stainless) US26 (Bright Chrome, N/A 5575) SP10 (Sprayed Bronze) US26D (Satin Chrome, N/A 5575)US9A (Pol. Bronze-no Lacquer) US10A (Satin Bronze-no Lacquer)

Trim Options LT (Less Trim) 550DT (Dummy Trim) 555NL (Night Latch - HM) 556NL (Night Latch - WD)555NL-CA (Night Latch w/Cyl-HM) LCA (Less Cylinder Assy) 609DT (Dummy Trim) 556NL-CA (Night Latch w/Cyl-WD)376L (std. 5547 Lever) 376L-BE (Lvr-Blank Escutcheon) 376WDC-L (5547 Lever) 376WDC-LBE (LBE for Wood Door)379L (std. 55 Lever) 379L-BE (Lvr-Blank Escutcheon) 110WD-NL (Night Latch w/Cyl-WD) E376L-BE (E-Trim)110MD-NL (Night Latch w/Cyl-HM) E379L-BE (E-Trim)

E376WDC-L-BE (E-Trim)

Trim/Control Finish US3 (Bright Brass) US4 (Satin Brass) US10 (Satin Bronze) US10B (Satin Bronze-Oil Rubbed)US9A (Pol. Bronze-no Lacquer) US26D (Satin Chrome) US26 (Bright Chrome) US10A (Satin Bronze-no Lacquer)



55 Series Option Summary (continued)

Control OptionsLC (Less Control) 371 (Lever Control - 5547) 375 (Lever Control - 5575) 376T (Thumbturn Control - 5547)376T WDC (376T for Wood Door) 379L (Rim)

Control Lever Styles 06 Lever Standard 03K (03 Knurled Lever) 06K (06 Knurled Lever) 01, 02, 03, 06, 07, 12, 17 (Levers)

Mortise Locks LL (Less Lock) 7500 (Standard Mortise) E7500 (Electric Unlocking)

Mortise Lock E7500 Specify FS (Fail Safe) or FSE (Fail Secure) 24VDC standard, specify 12VDC if required.DC standard, specify AC if required.

Mortise Lock Finish US3 (Bright Brass) US4 (Satin Brass) US10 (Satin Bronze) US10B (Satin Bronze-Oil Rubbed)US10A (Satin Bronze-no Lacquer) US9A (Pol. Bronze-no Lacquer) US32D (Satin Stainless) US32 (Bright Stainless)


Misc 10WDA (#10WDA Cover Plate) 589 (WD Cover Plate)

Door Material AL (Aluminum Door) HM (Hollow Metal) WD (Wood Door) CP (Composite Door)



33



EXIT HARDWARERim Devices

US3/3A US26

�643E SPBLK

(Price includes 1409 Strike)

Weight lbs.

Standard Trim/Control/Cover PlateUS26D US10B US10 US4/4A

55EO 2135 2120 1997 1910 2316 2316 8 Ã 55DT 2531 2516 2393 2239 2722 2722 10 550DT 55NL 2629 2614 2491 2332 2822 2822 11 550DT/110MD/WD* 55L 2811 2796 2603 2516 3084 2992 13 379L

* For solid wood doors the #10 WDA cover plate is supplied at an additonal $39 list add.

Concealed Vertical Rod Devices(Price includes 471U and 304L Strikes)

5547EO 2612 2780 2504 2427 2914 2914 14 Ã 5547DT 3008 3176 2900 2756 3320 3320 16 550DT 5547NL 3193 3361 3094 2901 3510 3510 16 555NL* 5547L 3287 3455 3179 3023 3634 3589 17 376L 5547TL 3572 3740 3494 3242 3931 3884 19 550DT/376T

* For 5547L, minimum control centerline of lever or thumbturn is 49-7/8" and the minimum stile width is 1-3/4". If standard mounting height is required use 5547L-F x 371L (see page 33).

Wood Door Concealed Vertical Rod Devices(Price includes 338 and 304L Strikes and Scalp Plates for metal frame applications)

5547WDC-EO 2990 3070 2579 2494 3169 3169 14 Ã 5547WDC-DT 3386 3466 2975 2823 3575 3575 16 550DT 5547WDC-NL 3571 3651 3169 2968 3765 3765 16 556NL**5547WDC-L 3704 3784 3293 3129 3928 3883 17 376WDC-L/10WDA 5547WDC-TL 3989 4069 3608 3348 4225 4178 19 550DT/376WDC-T/ 10WDA

For wood frame applications, specify 472U (1 3/4" Dr.) or 473U (2 1/4" Dr.) Top Strike. ** For 5547WDC-L the minimum lever centerline 45-13/16" AFF.

Mortise Lock Devices(Price includes 575 Strike)

5575EO 2011 2436 1909 1822 2336 2336 12 Ã 5575DT 2407 2832 2305 2151 2742 2742 15 550DT 5575NL 2407 2832 2305 2151 2742 2742 15 550DT 5575L 2679 3104 2677 2414 3097 3004 15 375L

2 1/4" wood door is a Special Order Product Consult factory for lead time For wood door application a 589 Adaptor Plate will be supplied at an additional price. Refer to page 71 for price by finish.

HANDING: 55 Series device handing is field reversible. RHR handing is furnished standard when handing is not specified.

��Consult factory for lead time.

Devices are priced complete with standard trim, strikes, and sex bolts.Cylinders are not included in price.

Series Devices 55

34



FIRE EXIT HARDWAREConcealed Vertical Rod Devices HOLLOW METAL DOORS ONLY

US3/3A US26

�643E SPBLK

(Price includes 301L Strike)

Weight lbs.

Standard Trim/Control/Cover PlateUS26D US10B US10 US4/4A

5547EO-F 2777 2933 2773 2698 3073 3073 15 Ã 5547L-F 3341 3497 3405 3184 3684 3637 18 371L 5547TL-F 3619 3775 3673 3416 3992 3945 19 609DT/376T

FLUSH TRANSOM INSTALLATION on 5547-F devices, specify #900614 Release Bracket,$93 list add per device.

Wood Door Concealed Vertical Rod Devices(Price includes 338 and 304L Strikes and Scalp Plate)

5547WDC-EO-F 3005 3185 2837 2757 3186 3186 14 Ã * 5547WDC-NL-F 3586 3766 3427 3231 3782 3782 16 556NL** 5547WDC-L-F 3719 3899 3551 3392 3945 3900 18 376WDC-L/10WDA 5547WDC-TL-F 4004 4184 3866 3611 4242 4195 19 550DT/376WDC-T/10WDA

* For wood frame applications, specify 472U (1 3/4" Dr.) or 473U (2 1/4" Dr.) Top Strike. ** For 5547WDC-L-F the minimum lever centerline 45-13/16" AFF.


5575EO-F 2175 2440 2045 1999 2504 2504 12 Ã 5575NL-F 2571 2836 2441 2328 2910 2910 15 550DT 5575L-F 2843 3108 2813 2591 3265 3172 15 375L

2 1/4" wood door is a Special Order Product. Consult factory for lead time. For wood door application a 589 Adaptor Plate will be supplied at an additional price. Refer to page 71 for price by finish.

HANDING: 55 Series device handing is field reversible. RHR handing is furnished standard when handing is not specified.

� Consult factory for lead time.

Devices are priced complete with standard trim, strikes, and sex bolts.Cylinders are not included in price.

55 Series Devices (continued)

35



B. End Case


D. Lever Arm C. Cross Bar

Standard Finishes

Color US NumberBHMA Number A, B, D C - Cross Bar Finishes

Bright Brass US3 605 Buffed Brass, Clear Coat Buffed Brass, Clear CoatSatin Brass US4 606 Satin Brass, Clear Coat Satin Brass, Clear CoatSatin Bronze US10 612 Plated/ Anodized Satin Bronze US10Satin Bronze, Oil-Rubbed US10B 613 Oil-Rubbed Oil Rubbed, US10B, 613Polished Chrome US26 625 Plated Bright Stainless Steel US32, 629Satin Chrome US26D 626 Plated Satin Stainless Steel US32D, 630Black SPBLK 693 Powder Coat Powder Coat, SPBLK, 693

Special Finishes

Color US NumberBHMA Number A, B, D C - Touch Bar Trim Finishes

Bright Brass- no Lacquer US3A Ã Buffed Brass Bright Brass US3ASatin Brass- no Lacquer US4A Ã Satin Brass Satin Brass US4AAged Bronze 643E Ã Aged Bronze, Relieved Aged Bronze, no ReliefSatin Chrome - Antimicrobial US26D-AM Ã AM Clear over Plated AM - Clear over Satin Stainless Steel



(Optional)

For Composite or Wood Fire Doors 425 Sex Bolts

(Supplied) List Add

88 or 8875 with Trim 4 4

$9.00 each Sex Bolt

88 or 8875 EO (exit device only) 8 88827 with trim 12 12

8827 EO (exit device only) 16 16

8847 4 4

Note: On a Fire Device "A" = Stainless Steel Substrate

Series Finish Chart 88



Type of Device None (Rim) 27 (Surface Vertical Rod) 47 (Concealed Vertical Rod) 75 (Mortise Lock)

Function EO (Exit Only) DT (Dummy Trim) L (Lever-06 Standard) LDT (Lever-Dummy Trim)NL (Night Latch-Key Retracts) NLOP (Night Latch, Opt. Pull) TLOP (Turn Lever - Opt. Pull) TL (Turn Lever)K (Knob) KNL (Knob Night Latch) KBE (Knob Blank Escutcheon) KDT (Knob Dummy)TP (Thumbpiece) LBE (Lever - Blank Escutcheon) TLBE (Turn Lever - Blank Escutcheon)TPNL (Thumbpiece - Night Latch) TPBE (Thumbpiece - Blank Escutcheon)


Device / Crossbar Finish US3 (Bright Brass) US3A (US3 - No Lacquer) US4 (Satin Brass) US4A (US4 - No Lacquer)US10 (Satin Bronze) US10B (Brass, Oil Rubbed) US26 (Bright Chrome) US26D (Satin Chrome)SPBLK (Black)


Cross Bar OptionsRE (Reinforced Crossbar) KN (Knurled)

Switch Options RX (Request to Exit)

Electric Options E (Electric Unlocking)

Device Options HH (Hurricane) CYL (Include Cylinder) PL (Include Pullman Latch) SEC (Include Security Screws)SNB (Include Sex Bolts) SLM (Include SLM Blocking) FL (8847-F Device) FL (8827-F, not UL Fire application)

Rods For Surface / Concealed Vertical Devices only OPR (1 piece Top Rod) LBR (Less Bottom Rod) RG-27 (Rod / Latch Guard) RGO (Rod Guard Only)

Strike Series LS (Less Strike) LTS (Less Top Strike) 264 (Opt. Rim) 260U/UF (Opt. SV Flush Transom)268 (Std. 88 Fire) 299 (Std. 88 Rim) 575 (Std. 8875 Mortise) 575-2 (Opt. 8875 Mortise)576A (Opt. 8875 1-3/4) 576B (Opt. 8875 2-1/4) 1409 (Opt. 88 Rim) 1410, 1606, 1609, 1610 (Opt. Rim)

Bottom Strike Series LBS (Less Bottom Strike) 248L4 (Surface) 301L / 304L (Mortise) 385A (Adjustable Mortise)

Strike Finish US3 (Bright Brass) US4 (Satin Brass) US10 (Satin Bronze) US10B (Satin Bronze-Oil Rubbed)US19 (Flat Black) US26 (Bright Chrome) US26D (Satin Chrome) US32 (Bright Stainless)US32D (Satin Stainless) MD (Molydag) SP313 (Dark Bronze)

Trim Options LT (Less Trim) 606 / 608 (Opt. Trim) 880 (Std. Trim) 880SA (Std. Vert. Surface Applied)110MD / 110WD (Std. on NL-OP) 216D (Cylinder Anchor) 880WDF (Std. 88-F Rim wood / composite door)

Trim Finish US3 / 3A (Bright Brass) US4 / 4A (Satin Brass) US10 (Satin Bronze) US10B (Satin Bronze-Oil Rubbed)US26 (Bright Chrome) US26D (Satin Chrome) SPBLK (Black Painted)

88 Series Option Summary

37



(continued) Series Option Summary 88Control OptionsLC (Less Control) 371 (Lever - 8847-F) 373 (Lever - 88 Rim, 8827 / 8875) 376T (Thumbturn Control -CV)377T (Thumbturn - 8827)

Control Lever Styles 06 Lever Standard 03K (03 Knurled Lever) 06K (06 Knurled Lever) 01, 02, 03, 06, 07, 12, 17 (Levers)

Control Finish US3 (Bright Brass) US4 (Satin Brass) US10 (Satin Bronze) US10B (Satin Bronze-Oil Rubbed)US26 (Bright Chrome) US26D (Satin Chrome) SPBLK (Black Painted)

Mortise Lock E7500 7500 (Standard Mortise Lock) E7500 (Electric Unlocking) LL (Less Lock) DC standard, specify AC if required.24VDC standard, specify 12VDC if required. Specify FS (Fail Safe) or FSE (Fail Secure)

Mortise Lock Finish US3/ 3A (Bright Brass) US4 / 4A (Satin Brass) US10 (Satin Bronze) US10B (Satin Bronze-Oil Rubbed)US32D (Satin Stainless) SPBLK (Black) US19 (Flat Black) US32 (Bright Stainless)


Misc LCP (Less Cover Plate) 10WDA (#10WDA Cover Plate) 889R / 889M / 889V (373L w / Sexbolts Cover Plates)

Door Material AL (Aluminum Door) HM (Hollow Metal) WD (Wood Door) CP (Composite Door)


Door Application D (Double Egress) P (Pair of Doors) S (Single Door)MSV / MCV (Mortise Surface / Concealed Vert.)



Devices are priced complete with standard trim and strikes.Cylinders and sex bolts are not included in price.

88 Series Devices


US15 US26 �643E


SPBLKWeight

lbs.Standard

Trim/ControlUS26D US10B US10 US4/4A★ 88EO 1115 1241 1146 1083 1379 1379 11 Ã 88DT 1319 1459 1405 1241 1642 1642 13 880DT-R 88NL 1333 1476 1424 1250 1662 1662 13 880NL-R 88TP 1340 1480 1460 1296 1695 1695 14 880TP-R 88K 1378 1523 1479 1296 1716 1716 13 880K-R * 88L 1632 1758 1592 1529 1990 1896 14 373L

Surface Vertical Rod Devices(Price includes 299, 248L-4, and 304L Strikes)

8827EO 1576 1717 1520 1434 1842 1842 13 Ã 8827DT 1780 1935 1779 1592 2105 2105 17 880DT-V&M 8827TP/8827TP-NL 1801 1956 1834 1647 2158 2158 17 880TP-V 8827K/8827K-NL 1839 1999 1853 1647 2179 2179 17 880K-V * 8827L 2093 2234 1966 1880 2453 2359 17 373L**8827TL 2344 2499 2373 2078 2716 2669 20 880DT-V&M/377T


8875EO 1500 1725 1544 1480 1771 1771 13 Ã 8875DT 1704 1943 1803 1638 2034 2034 15 880DT-V&M 8875NL 1718 1960 1822 1647 2054 2054 15 880NL-M 8875TP 1725 1964 1858 1693 2087 2087 16 880TP-M 8875K 1763 2007 1877 1693 2108 2108 15 880K-M * 8875L 2017 2242 1990 1926 2382 2288 16 373L

* For Composite Doors using 373L Controls with Sex Bolts, an 889 Cover Plate will be supplied at an additional price. Refer to page 71 for price by finish.★ Cylinder Plate Included for NLOP Function.

* For Composite Doors using 373L Controls with Sex Bolts, an 889 Cover Plate will be supplied at an additional price. Refer to page 71 for price by finish.** For Wood Doors using 377T Controls, the #10 WDA Cover plate is supplied at an additional $39 list add.

* For Composite Doors using 373L Controls with Sex Bolts, an 889 Cover Plate will be supplied at an additional price. Refer to page 71 for price by finish.

HANDING: Handing must be specified on the following applications:

88-F Rim, 8847-F, 8875 Panic and Rim and all Devices specified with Lever Trim


39



Devices are priced complete with standard trim and strikes.Cylinders and sex bolts are not included in price unless noted.

(continued) Series Devices 88

FIRE EXIT HARDWARERim Devices

US3/3A US26 �643E


SPBLKWeight

lbs.Standard

Trim/ControlUS26D US10B US10 US4/4A 88EO-F 1404 1582 1386 1322 1759 1759 11 Ã 88NL-F 1622 1817 1664 1489 2042 2042 13 880NL-R 88TP-F 1629 1821 1700 1535 2075 2075 13 880TP-R 88K-F 1667 1864 1719 1535 2096 2096 13 880K-R * 88L-F 1921 2099 1832 1768 2370 2276 14 373L


Surface Vertical Rod Devices(Price includes 304L Strike)

8827EO-F 2152 2244 2035 1951 2415 2415 14 Ã 8827TP-F/8827TP-NL-F 2377 2483 2349 2164 2731 2731 18 880TP-V 8827K-F/8827K-NL-F 2415 2526 2368 2164 2752 2752 17 880K-V * 8827L-F 2669 2761 2481 2397 3026 2932 19 373L**8827TL-F 2920 3026 2888 2595 3289 3242 20 880DT-V&M/377T

Concealed Vertical Rod Devices(Price includes 301L Strike)

8847EO-F 1872 1968 1841 1774 2196 2196 12 Ã 8847L-F 2436 2532 2473 2260 2807 2760 17 371L 8847TL-F 2640 2750 2694 2418 3070 3023 18 880DT-V-SA/376T


8875EO-F 1619 1688 1665 1602 1902 1902 13 Ã 8875NL-F 1837 1923 1943 1769 2185 2185 15 880NL-M 8875TP-F 1844 1927 1979 1815 2218 2218 16 880TP-M 8875K-F 1882 1970 1998 1815 2239 2239 15 880K-M * 8875L-F 2136 2205 2111 2048 2513 2419 16 373L

* For Composite Doors using 373L Controls with Sex Bolts, an 889 Cover Plate will be supplied at an additional price. Refer to page 71 for price by finish.** For Solid Wood Doors using 377T Controls, the #10 WDA Cover plate is supplied at an additional $39 list add.

For Hollow Metal Doors Only. Available with dogging, less label, at no additional charge. Consult Factory for Lead Time.


HANDING: Handing must be specified on the following applications:

88-F Rim, 8847-F, 8875 Panic and Fire and all Devices specified with Lever Trim




55/88 Device Options (continued)

Crossbar OptionsSuffix List AddRCB Reinforced Crossbar 81

KN Knurled Crossbar 93

Pullman LatchesPrefix List AddPL 8827 Device PL Top and PL Bottom (Non-Fire Device only) 172ES ES Pullman Top Latch for 5547 Device (Metal doors only) 208

Flush Transom Installation(Available on 8827-F and 8847-F)

Prefix List AddFL 8827-F Device (Not a UL Fire Exit Hardware listed application) 306FL 8847-F Device 75

Electric UnlockingPrefix List Add E Electric Unlocking ("BE" Lever Trim Only)

Available on the following Mortise Lock Devices: 5575 Series: 5575L-BE, 5575L-BE-F 8875 Series: 8875K or K-BE, 8875K or K-BE-F, 8875TP or TP-BE, 8875TP-F or TP-BE-F Specify Fail Secure (FSE) or Fail Safe (FS). For 24VAC installation a SO-24 Rectifier Kit will be supplied at an additional $33 list add.

474

E Electric Unlocking ("BE" Trim Only)

Available on the following Lever or Thumbturn Controls. 55 Series: 371L-BE, 376L-BE, 376WDC-L-BE, 379L-BE, 376T-BE, 376WDC-T-BE 88 Series: 371L-BE, 373L-BE, 376T-BE, 377T-BE 24VDC furnished standard. Prefix Lever or Thumbturn Control with "E". Example: E371L-BE

474

SwitchesPrefix List AddRX Crossbar monitor switch in end case. Factory Install Only. 191

41



Series Finish Chart 98/99E. Mechanism End

D. CoverB. Touch Bar End (2)

C. Touch Bar Trim

F. Mechanism

A. Center CaseStandard Finishes

ColorUS Number


Bright Brass US3 605 Bright Brass Bright Brass US3, 605 Buffed Anodized

Satin Brass US4 606 Satin Brass Satin Brass US4, 606 Anodized

Satin Bronze US10 612 Plated/Anodized Satin Bronze US10, 725 Anodized

Satin Nickel US15 619 Plated, Clear Powder Coat Satin Stainless Steel US32D, 630 Anodized

Polished Chrome US26 625 Plated Bright Stainless Steel US32, 629 Buffed Anodized

Satin Chrome US26D 626 Plated Satin Stainless Steel US32D, 630 Anodized

Anodized Aluminum US28 628 Powder Coat Satin Stainless Steel US32D, 630 Anodized

Satin Stainless Steel US32D 630 Stainless Steel Satin Stainless Steel US32D, 630 Anodized

Duranodic Dark Bronze 313 710 Powder Coat Powder Coat 313, 710 Powder Coat


US32D and US15 finishes available on Series 98 only.

Special Finishes

Color US NumberBHMA Number A, B, E C -Touch Bar Trim Finishes D, F

Bright Bronze US9 611 Plated Bright Bronze US9, 611 Buffed Anodized

Satin Bronze, Oil-Rubbed US10B 613 Oil-Rubbed Oil-Rubbed, US10B Powder Coat

Satin Chrome, Antimicrobial US26D-AM 626-AM AM Clear over Chrome

AM Clear over Satin Stainless Steel US32D, 630


Satin Stainless Steel, Antimicrobial US32D-AM 630-AM AM Clear over Stainless Steel



Aged Bronze, 643E Ã" Ã" (A) Aged Bronze, No Relief (B, E) Relieved Aged Bronze

Relieved Aged Bronze Aged Bronze, No Relief


Powder Coat


FINISH NOTES:US32D and US15 finishes available on Series 98 only. Devices ordered in US28 and US32D will be supplied with Trims in US26D.

98/99 Series Sex Bolt Quantities


(Supplied)425 Sex Bolt

(Supplied)425 Sex Bolt

(Optional)825 Sex Bolt

(Supplied) List AddDT, EO, NL, TP, K or L Device with trim 2

$9.00 eachSex Bolt

99 NLOP Device with 110MD/WD 6


99 EO Device (exit device only) 6



99-F Wood Door with trim 2

Windstorm Device 12 6



98/99 Series Option SummaryType of Device None (Rim) 27 (Surface Vertical Rod) 57 (Surface Three Point Latch) 75 (Mortise Lock)47 / 48 (Concealed Vertical Rod) 47 WDC (Wood Door Concealed Vertical Rod) 49 (Concealed Vertical Cable)

Function EO (Exit Only) DT (Dummy Trim) L (Lever-06 Standard) LDT (Lever-Dummy Trim)NL (Night Latch-Key Retracts) NLOP (Night Latch, Opt. Pull) LNL (Lever-Night Latch) TL (Turn Lever)HL (Hospital Latch) K (Knob) KBE (Knob Blank Escutcheon) KDT (Knob Dummy)KNL (Knob Night Latch) LBE (Lever-Blank Escutcheon) TLBE (Turn Lever - Blank Escutcheon)TP (Thumbpiece) TLOP (Turn Lever, Opt. Pull) TPBE (Thumbpiece - Blank Escutcheon)


Device Finish US3 (Bright Brass) US4 (Satin Brass) US10 (Satin Bronze) US28 (Anodized Aluminum)US26 (Bright Chrome) US26D (Satin Chrome) US26D-AM (Antimicrobial) 313 (Duranodic Dark Bronze)315 (Black) 643E (Aged Bronze)US32D / 32D-AM (Satin Stainless Steel) & US15 (Satin Nickel) 98 Series only

Device Length (Feet and Inches) 2' (2' Device for 2' Door) 3' (3' Device for 2' 4" - 3' Door) 4' (4' Device for 2' 10" - 4' Door)


Touch Bar Trim OptionsRSS (Emergency Exit- US32D only) EMB (Embossed - Push) SG (Safety Glow) KN (Knurled) BR (Braille)WH (Drainage/Weep Holes in Mechanism Case - 3' device will have 4 holes - 6" spacing, 4' device will have 6 holes - 6" spacing)

Touch Bar Finish US3 (Bright Brass) US4 (Satin Brass) US10 (Satin Bronze) US19 (Flat Black)US32 (Bright Stainless) 340 (Photoluminescent) US32D (Satin Stainless) 313 (Duranodic Dark Bronze)

Dogging OptionsCD (Cylinder Dogging - Panic Only)DI (Dogging Indicator)

HD (EL Hex Dogging)SD (Special Dogging)

LD (Less Dogging) CI (Cylinder Dogging Indicator)

Switch Options LX (Latchbolt Monitoring) LXLC (LBM Low Current) RX (Request to Exit) RXLC (Request to Exit Low Current)RX2 (Request to Exit Double Switch) LXRX (LBM Request to Exit) LXRXLC (LBM Request to Exit Low Current)

Electric Options EL (Electric Latch Retraction) PN (Pneumatic) E (Electric Mortise Lock) ES (Electric Strike)SS (Signal Switch, Rim or Mortise) QEL (Quiet Electric Latch Retraction)

Device Options CX (Chexit - Controlled Exit) CXR (CX-RCM) HH (Hurricane) WS (Windstorm)HHCX (Hurricane CX) HHCXR (Hurricane CX-RCM) SNB (Sex Bolts) GBK (Include GBK)-2 (Double Cylinder) -2S1 (Cylinder Dogging with Security Indicator) CYL (Include Cylinder)PL (Include Pullman Latch) SLM (Include SLM Blocking) ALK (Standard Alarm Kit) SEC (Include Security Screws)

Rods For Surface / Concealed Vertical Devices only OPR (1 piece Top Rod)LBRAFL (LBR with Aux. Fire Pin)

LBL (Less Bottom Cable) LBLAFL (LBL with Aux. Fire Pin) LBR (Less Bottom Rod)

Strike Series LS (Less Strike) LTS (Less Top Strike) 260U / 260UF (Opt. SV Flush Transom) 249 (Std. 49)264 (Opt. Rim or SV) 283 (Opt. CV - Wood Frame) 299 / 299F (Std. SV) 338 (Std. CV)499F (Std. SV Fire LBR) 575 / 575-2 (Std. Mortise) 576A (Mortise, pairs 1-3/4 Dr) 576B (Mortise, pairs 2-1/4 Dr)

1409, 1410, 1439, 1606, 1609 (Opt. Rim)

Bottom Strike Series LBS (Less Bottom Strike) 248L4 (Surface) 304L (Mortise) 349 (Std. 49) 385A (Adjustable Mortise)

Strike Finish US3 (Bright Brass) US4 (Satin Brass) US10 (Satin Bronze) US10B (Satin Bronze-Oil Rubbed)US19 (Flat Black) US26 (Bright Chrome) US26D (Satin Chrome) US32 (Bright Stainless)US32D (Satin Stainless) MD (Molydag) SP10 (Sprayed Bronze) SP313 (Dark Bronze)

43



(continued) Series Option Summary 98/99Trim Options LT (Less Trim) RX996 (Request to Exit 996) VR910 (Vandal Resistant) 110MD / 110WD (Std. on NL-OP)392-7 (Opt. Pull Dummy Trim) 990 (Std. Rim) 996 (Std. Lever Trim) E996 (Electric 996)697 / 697WDF (Opt. Lever Trim) 696 / 696WDF (Opt. Lever Trim)

Trim / Control / Mortise Finish US3 (Bright Brass) US4 (Satin Brass) US10 (Satin Bronze) US10B (Satin Bronze-Oil Rubbed)US26 (Bright Chrome) US26D (Satin Chrome) SPBLK (Black Painted) 313 (Duranodic Dark Bronze)US15 (Satin Nickel) US19 (Flat Black - 98/9975) US26D-AM (Antimicrobial) US32 (Bright Stainless)US32D (Satin Stainless)

Control OptionsLC (Less Control) 374T (Thumbturn Control - SV) 376T / 376T WDC (Thumbturn Control - CV)

Trim Lever Styles 06 Lever Standard ACC (Accent Lever) AST (Asti Lever) MER (Merona Lever) STA (St. Anne Lever)03K (03 Knurled Lever) 06K (06 Knurled Lever) 01, 02, 03, 05, 06, 07, 12, 16, 17, 18 (Levers)03 SS, 06 SS, 17 SS, LAT SS, LON SS, M57, M62 (Stainless Steel Levers) LAT (Latitude) LON (Longitude)M51, M52, M53, M54, M55, M56, M61, M63, M81, M82, M83, M84, M85

Mortise Lock LL (Less Lock) 7500 (Standard Mortise) SS7500 (Signal Switch) 7500-2 (Double Cylinder)E7500 (Electric Unlocking specify FS - Fail Safe or FSE - Fail Secure, 12V or 24V and AC or DC)

Chexit Options B15 (BOCA 15 Second Delay) 0 (0 Second Delay) 15 (15 Second Delay) 30 (30 Second Delay)LRG (Less Rod Guards) RGO (Rod Guards Only)


Misc CE (CE Labeled) LCP (Less Cover Plate) 10WDA (#10WDA Cover Plate)RAT REL (Ratchet Release Assy) 10CABLE (10' Cable)

Door Material AL (Aluminum Door) HM (Hollow Metal) WD (Wood Door) CP (Composite Door)CLAD2 (Insulclad - 1/2") CLAD4 (Insulclad - 1/4") SC (Steelcraft, HH Device Only)



APPLICATION NOTE FOR 2' DEVICE: Available on Surface and Concealed Vertical (panic and fire).When vertical rod devices are used on both doors of a pair, operation of the inactive door (smaller door) will not disengage the active door, creating a potential safety issue for those using the inactive door during an emergency. In addition, standard hex or cylinder dogging is not available. If dogging is required, special center case dogging is available for 98/9927/47 devices. Prefix device with “SD”. Add $314 list.

For pairs of doors using one 2' door Von Duprin recommends the following hardware combinations listed below for optimum safety in an emergency.1. Surface or Concealed Vertical device on the 2' door (inactive) and a mortise device on the larger door (active). This combination is used primarily on Hollow Metal door applications only.2. Automatic Flush Bolt on the 2' door (inactive) and a Surface or Concealed Vertical device on the larger door (active).

NOTE: The 2' door width is not available with any Electrical, Chexit, Hurricane, Pneumatic or Windstorm options.

44



3' Devices are priced complete with standard trim and strike(s).2' add $75 list (vertical devices only), 4' add $18 list. Cylinders and sex bolts are not included in price unless noted.

98/99 Series Devices


US15 US26 �643E


Weight lbs. Standard Trim/ControlUS26D US28 US32D 313 US10 US4/4A 315 2' 3' 4'

98/99EO 1075 949 1092 996 1090 1104 1252 1534 Ã 14 17 Ã98/99DT 1271 1145 1288 1206 1300 1262 1471 1744 Ã 17 19 990DT98/99NL 1285 1159 1302 1212 1309 1275 1477 1750 Ã 17 19 990NL-R&V98/99NL-OP 1173 1047 1190 1094 1188 1197 1352 1634 Ã 15 18 110MD/WD98/99TP 1354 1228 1371 1285 1368 1335 1554 1823 Ã 16 20 990TP-R&V98/99K 1412 1286 1429 1351 1492 1398 1683 1889 Ã 18 21 996K-R&V98/99L 1528 1402 1545 1462 1563 1529 1781 2000 Ã 19 21 996L-R&V


Surface Vertical Rod Devices(Price includes 299, 248L-4, 304L Strikes and Sex Bolts for Latches)

98/9927EO 1553 1417 1639 1513 1577 1617 1773 2073 16 18 20 Ã98/9927DT 1749 1613 1835 1723 1787 1775 1992 2283 16 19 22 990DT98/9927NL 1763 1627 1849 1729 1796 1788 1998 2289 16 19 22 990NL-R&V98/9927NL-OP 1651 1515 1737 1611 1675 1710 1873 2173 16 19 22 110MD/WD98/9927TP 1832 1696 1918 1802 1855 1848 2075 2362 17 20 23 990TP-R&V

98/9927K 1890 1754 1976 1868 1979 1911 2204 2428 20 22 24 996K-R&V98/9927L 2006 1870 2092 1979 2050 2042 2302 2539 20 22 24 996L-R&V * 98/9927TL 2313 2177 2399 2287 2381 2261 2603 2847 22 24 26 990DT/374T

* For wood doors the #10WDA cover plate will be supplied at an additional $39 list add.US32D and US15 finishes available on Series 98 only.


98/9947EO 1637 1454 1673 1571 1642 1701 1793 2126 15 17 19 Ã98/9947DT 1833 1650 1869 1781 1852 1859 2012 2336 15 19 23 990DT98/9947NL 1847 1664 1883 1787 1861 1872 2018 2342 15 19 23 990NL-R&V98/9947NL-OP 1735 1552 1771 1669 1740 1794 1893 2226 15 19 23 110MD/WD98/9947TP 1916 1733 1952 1860 1920 1932 2095 2415 16 19 22 990TP-R&V98/9947K 1974 1791 2010 1926 2044 1995 2224 2481 17 21 25 996K-R&V98/9947L 2090 1907 2126 2037 2115 2126 2322 2592 21 23 25 996L-R&V98/9947TL 2397 2214 2433 2345 2446 2345 2623 2900 21 23 25 990DT/376T

US32D and US15 finishes available on Series 98 only. ��Consult factory for lead time.

45



3' Devices are priced complete with standard trim and strike(s).2' add $75 list (vertical devices only), 4' add $18 list.

Cylinders and sex bolts are not included in price unless noted.

(continued) Series Devices 98/99

EXIT HARDWAREConcealed Vertical Rod Devices

US3/3A US26 �643E

(Price includes 338 and 385A Strikes)

Weight lbs.Standard

Trim/Control /Cover PlateUS26D US28 US32D 313 US10 US4/4A US15 315 2' 3' 4'

98/9948EO 1872 1689 1908 1806 1877 1936 2028 2028 2361 15 17 19 Ã98/9948DT 2068 1885 2104 2016 2087 2094 2247 2247 2571 15 19 23 990DT98/9948NL 2082 1899 2118 2022 2096 2107 2253 2253 2577 15 19 23 990NL-R&V98/9948NL-OP 1970 1787 2006 1904 1975 2029 2128 2128 2461 15 19 23 110MD98/9948TP 2151 1968 2187 2095 2155 2167 2330 2330 2650 16 19 22 990TP-R&V98/9948K 2209 2026 2245 2161 2279 2230 2459 2459 2716 17 21 25 996K-R&V98/9948L 2325 2142 2361 2272 2350 2361 2557 2557 2827 21 23 25 996L-R&V98/9948TL 2632 2449 2668 2580 2681 2580 2858 2858 3135 21 23 25 990DT/376TUS32D and US15 finishes available on Series 98 only.

Wood Door Concealed Vertical Rod Devices(Price includes 338 and 385A Strikes, Sex Bolts, and 8" Scalp Plate)

98/9947WDC-EO 1806 1621 1851 1755 1823 1887 2027 1963 2309 15 17 19 Ã98/9947WDC-DT 2002 1817 2047 1965 2033 2045 2246 2182 2519 15 19 23 990DT98/9947WDC-NL 2016 1831 2061 1971 2042 2058 2252 2188 2525 15 19 23 990NL-R&V98/9947WDC-NL-OP 1904 1719 1949 1853 1921 1980 2127 2063 2409 15 19 23 110WD98/9947WDC-TP 2085 1900 2130 2044 2101 2118 2329 2265 2598 16 19 22 990TP-R&V98/9947WDC-K 2143 1958 2188 2110 2225 2181 2458 2394 2664 17 21 25 996K-R&V98/9947WDC-L 2259 2074 2304 2221 2296 2312 2556 2492 2775 21 23 25 996L-R&V98/9947WDC-TL 2605 2420 2650 2568 2666 2570 2896 2832 3122 21 23 25 990DT/376WDC-T/10WDAFor wood frame applications the 283 Strike must be specified.

US32D and US15 finishes available on Series 98 only.To order a 98/9947 WDC Scalp Plate only, order part number 050088: US28, US26D $32; US10, US4, 313AN $49; US3, US26 $96

Surface Three Point Latch Devices(Price includes 299(2), 248L-4, 304L Strikes and Sex Bolts for Latches)

98/9957EO 2083 1855 2215 2013 2153 2232 2404 2404 2568 14 17 20 Ã98/9957DT 2279 2051 2411 2223 2363 2390 2623 2623 2778 19 21 23 990DT98/9957NL 2293 2065 2425 2229 2372 2403 2629 2629 2784 20 21 22 990NL-R&V98/9957NL-OP 2181 1953 2313 2111 2251 2325 2504 2504 2668 20 21 22 110MD/WD98/9957TP 2362 2134 2494 2302 2431 2463 2706 2706 2857 18 20 22 990TP-R&V98/9957K 2420 2192 2552 2368 2555 2526 2835 2835 2923 22 23 24 996K-R&V

*98/9957L 2536 2308 2668 2479 2626 2657 2933 2933 3034 20 23 26 996L-R&V

*For wood doors the #10WDA cover plate will be supplied at an additional $39 list add. US32D and US15 finishes available on Series 98 only. � Consult factory for lead time.

46



3' Devices are priced complete with standard trim and strike(s). 2' add $75 list (vertical devices only), 4' add $18 list. Cylinders and sex bolts are not included in price unless noted.

98/99 Series Devices (continued)

EXIT HARDWAREMortise Lock Devices

US3/3A US26 �643E

(Prices includes 575 Strike)

Weight lbs. Standard Trim/ControlUS26D US28 US32D 313 US10 US4/4A US15 315 2' 3' 4'

98/9975EO 1521 1387 1558 1438 1564 1564 1742 1727 1993 Ã 15 18 Ã98/9975HL 1685 1551 1728 1608 1734 1734 1912 1897 2163 Ã 18 20 Ã98/9975DT 1717 1583 1754 1648 1774 1722 1961 1946 2203 Ã 19 21 990DT

98/9975NL 1731 1597 1768 1654 1783 1735 1967 1952 2209 Ã 19 21 990NL-M98/9975TP 1800 1666 1837 1727 1842 1795 2044 2029 2282 Ã 18 20 990TP-M98/9975K 1858 1724 1895 1793 1966 1858 2173 2158 2348 Ã 21 22 996K-M98/9975L 1974 1840 2011 1904 2037 1989 2271 2256 2459 Ã 21 23 996L-M

FIRE EXIT HARDWARERim Devices(Price includes 299F Strike for single door applications only. For double door applications, the 499F Strike will be supplied at an additional $80 list add)

98/99EO-F 1198 1115 1240 1183 1243 1304 1414 1414 1713 10 13 16 Ã98/99NL-F 1408 1325 1450 1399 1462 1475 1639 1639 1929 14 16 18 990NL-R&V98/99NL-OP-F 1296 1213 1338 1281 1341 1397 1514 1514 1813 11 14 17 110MD/WD98/99TP-F 1477 1394 1519 1472 1521 1535 1716 1716 2002 15 17 19 990TP-R&V98/99K-F 1535 1452 1577 1538 1645 1598 1845 1845 2068 18 19 20 996K-R&V98/99L-F 1651 1568 1693 1649 1716 1729 1943 1943 2179 16 18 20 996L-R&VUS32D and US15 finishes available on Series 98 only.

Surface Vertical Rod Devices(Price includes 299F, 304L Strikes and Sex Bolts for Latches)

98/9927EO-F 1767 1642 1858 1746 1803 1869 2015 2015 2286 13 16 19 Ã98/9927NL-F 1977 1852 2068 1962 2022 2040 2240 2240 2502 19 20 21 990NL-R&V98/9927NL-OP-F 1865 1740 1956 1844 1901 1962 2115 2115 2386 19 20 21 110MD/WD98/9927TP-F 2046 1921 2137 2035 2081 2100 2317 2317 2575 17 19 21 990TP-R&V98/9927K-F 2104 1979 2195 2101 2205 2163 2446 2446 2641 21 22 23 996K-R&V98/9927L-F 2220 2095 2311 2212 2276 2294 2544 2544 2752 19 22 25 996L-R&V

*98/9927TL-F 2527 2402 2618 2520 2607 2513 2845 2845 3060 19 22 25 990DT/374T

*For wood doors the #10WDA cover plate will be supplied at an additional $39 list add.

US32D and US15 finishes available on Series 98 only. � Consult factory for lead time.


47



FIRE EXIT HARDWAREConcealed Vertical Rod Devices

US3/3A US26 �643E

(Price includes 338 and 385A Strikes)

Weight lbs.Standard

Trim/Control /Cover PlateUS26D US28 US32D 313 US10 US4/4A US15 315 2' 3' 4'

98/9947EO-F 1850 1684 1908 1863 1925 1998 2146 2146 2406 15 17 19 Ã98/9947NL-F 2060 1894 2118 2079 2144 2169 2371 2371 2622 15 19 23 990NL-R&V98/9947NL-OP-F 1948 1782 2006 1961 2023 2091 2246 2246 2506 15 19 23 110MD98/9947TP-F 2129 1963 2187 2152 2203 2229 2448 2448 2695 16 19 22 990TP-R&V98/9947K-F 2187 2021 2245 2218 2327 2292 2577 2577 2761 17 21 25 996K-R&V98/9947L-F 2303 2137 2361 2329 2398 2423 2675 2675 2872 21 23 25 996L-R&V98/9947TL-F 2610 2444 2668 2637 2729 2642 2976 2976 3180 21 23 25 990DT/376T

98/9948EO-F 2085 1919 2143 2098 2160 2233 2381 2381 2641 15 17 19 Ã98/9948NL-F 2295 2129 2353 2314 2379 2404 2606 2606 2857 15 19 23 990NL-R&V98/9948NL-OP-F 2183 2017 2241 2196 2258 2326 2481 2481 2741 15 19 23 110MD98/9948TP-F 2364 2198 2422 2387 2438 2464 2683 2683 2930 16 19 22 990TP-R&V98/9948K-F 2422 2256 2480 2453 2562 2527 2812 2812 2996 17 21 25 996K-R&V98/9948L-F 2538 2372 2596 2564 2633 2658 2910 2910 3107 21 23 25 996L-R&V98/9948TL-F 2845 2679 2903 2872 2964 2877 3211 3211 3415 21 23 25 990DT/376T

Wood Door Concealed Vertical Rod Devices(Price includes 338 and 385A Strikes, Sex Bolts and 8" Scalp Plate)

98/9947WDC-EO-F 2088 1880 2149 2036 2117 2191 2353 2289 2581 15 17 19 Ã98/9947WDC-NL-F 2298 2090 2359 2252 2336 2362 2578 2514 2797 15 19 23 990NL-R&V98/9947WDC-NL-OP-F 2186 1978 2247 2134 2215 2284 2453 2389 2681 15 19 23 110WD98/9947WDC-TP-F 2367 2159 2428 2325 2395 2422 2655 2591 2870 16 19 22 990TP-R&V98/9947WDC-K-F 2425 2217 2486 2391 2519 2485 2784 2720 2936 17 21 25 996K-R&V98/9947WDC-L-F 2541 2333 2602 2502 2590 2616 2882 2818 3047 21 23 25 996L-R&V98/9947WDC-TL-F 2887 2679 2948 2849 2960 2874 3222 3158 3394 21 23 25 990DT/376WDC-T/10WDA

For wood doors using a "TL" function the #10WDA cover plate is supplied.For wood frame applications, the 283 Strike will be supplied.To order a 98/9947 WDC Scalp Plate only, order part number 050088: US28, US26D $32; US10, US4, 313AN $49; US3, US26 $96

US32D and US15 finishes available on Series 98 only. ��Consult factory for lead time.


3' Devices are priced complete with standard trim and strike(s).2' add $75 list, 4' add $18 list.

Cylinders and sex bolts are not included in the price unless noted.

(continued) Series Devices 98/99



FIRE EXIT HARDWARESurface Three Point Latch Devices

US3/3A US26 �643E

(Price includes 299F(2), 304L Strikes and Sex Bolts for Latches) Weight lbs. Standard

Trim/ControlUS26D US28 US32D 313 US10 US4/4A US15 315 3' 4'98/9957EO-F 2222 2004 2352 2195 2340 2419 2427 2427 2741 18 19 Ã98/9957NL-F 2432 2214 2562 2411 2559 2590 2652 2652 2957 19 22 990NL-R&V98/9957NL-OP-F 2320 2102 2450 2293 2438 2512 2527 2527 2841 19 22 110MD/WD98/9957TP-F 2501 2283 2631 2484 2618 2650 2729 2729 3030 20 23 990TP-R&V98/9957K-F 2559 2341 2689 2550 2742 2713 2858 2858 3096 22 24 996K-R&V98/9957L-F 2675 2457 2805 2661 2813 2844 2956 2956 3207 22 24 996L-R&V98/9957TL-F 2982 2764 3112 2969 3144 3063 3257 3257 3515 22 24 990DT/374T

Mortise Lock Devices(Prices includes 575 Strike)

98/9975EO-F 1671 1556 1731 1618 1729 1729 1908 1893 2163 15 19 Ã98/9975HL-F 1835 1720 1901 1788 1899 1899 2078 2063 2333 17 20 HL6M98/9975NL-F 1881 1766 1941 1834 1948 1900 2133 2118 2379 18 21 990NL-M98/9975TP-F 1950 1835 2010 1907 2007 1960 2210 2195 2452 19 21 990TP-M98/9975K-F 2008 1893 2068 1973 2131 2023 2339 2324 2518 20 23 996K-M98/9975L-F 2124 2009 2184 2084 2202 2154 2437 2422 2629 20 23 996L-MUS32D and US15 finishes available on Series 98 only.

��Consult factory for lead time.


3' Devices are priced complete with standard trim and strike(s). 4' add $18 list. Cylinders and sex bolts are not included in price unless noted.


49



EXIT HARDWAREConcealed Vertical Cable Devices US3/3A

US15 US26 �643E

(Price includes 249 and 349 Strikes)

Weight lbs. Standard TrimUS26D US28 US32D 313 US10 US4/4A 315 2' 3' 4'

98/9949EO 1718 1525 1755 1649 1723 1784 1881 2231 15 17 19 Ã

98/9949DT 1914 1721 1951 1859 1933 1942 2100 2441 15 19 23 990DT98/9949NL 1928 1735 1965 1865 1942 1955 2106 2447 15 19 23 990NL-R/V98/9949NL-OP 1816 1623 1853 1747 1821 1877 1981 2331 15 19 23 110MD98/9949TP 1997 1804 2034 1938 2001 2015 2183 2520 16 19 22 990TP-R/V98/9949L 2171 1978 2208 2115 2196 2209 2410 2697 21 23 25 996L-R/V

FIRE EXIT HARDWAREConcealed Vertical Cable Devices(Price includes 249 and 349 Strikes)

98/9949EO-F 1886 1693 1923 1817 1891 1952 2049 2399 15 17 19 Ã98/9949NL-F 2096 1903 2133 2033 2110 2123 2274 2615 15 19 23 990NL-R/V98/9949NL-OP-F 1984 1791 2021 1915 1989 2045 2149 2499 15 19 23 110MD98/9949TP-F 2165 1972 2202 2106 2169 2183 2351 2688 16 19 22 990TP-R/V98/9949L-F 2339 2146 2376 2283 2364 2377 2578 2865 21 23 25 996L-R/V

For Concealed Vertical Cable Devices - Less Cable System (LCS) Deduct $846 LIST



Other Door Opening Heights up to 10'0" are available with extended lead time. � Consult factory for lead time.

Standard Door Opening Height

Cable Part Number Min-Max opening heights by stile width

Feet Inches Top Bottom

Hollow Metal/ Wide-Stile

Al. (greater than 3-3/4"

stile width)

Medium-stile Al.

(2-3/4" - 3-3/4")

Narrow-stile Al.

(2-1/8" - 2-3/4")6'8" 80" 49CABLE.1023 49CABLE.1031 77-1/2" - 80-1/2" 78-1/2" - 80-1/2" 79-1/2" - 80-1/2"

7' 84" 49CABLE.1024 49CABLE.1027 81-1/2" - 84-1/2" 82-1/2" - 84-1/2" 83-1/2" - 84-1/2"7'2" 86" 49CABLE.1021 49CABLE.1051 83-1/2" - 86-1/2" 84-1/2" - 86-1/2" 85-1/2" - 86-1/2"

8' 96" 49CABLE.1025 49CABLE.1026 93-1/2" - 96-1/2" 94-1/2" - 96-1/2" 95-1/2" - 96-1/2"9' 108" 49CABLE.1030 49CABLE.1050 105-1/2" - 108-1/2" 106-1/2" - 108-1/2" 107-1/2" - 108-1/2"10' 120" 49CABLE.1029 49CABLE.1028 117-1/2" - 120 1/2" 118-1/2" - 120 1/2" 119-1/2" - 120 1/2" Door Opening Height

is measured from finished floor

to frame rabbet on door side.

3' Devices are priced complete with standard trim and strike(s). 2' add $75 list, 4' add $18 list.

Cylinders and sex bolts are not included in price unless noted.

For Concealed Vertical Cable Devices prices shown are for Door Opening Heights 6'8" to 8'4"For Door Opening Heights 8'5" to 10'0" add $57 list.

Door opening height must be specified when placing an order.

Device Options 98/99

50



EXIT HARDWAREWood Door Concealed Vertical Cable Devices

US3/3A US15 US26 �643E

(Price includes 249 and 349 Strikes, Sex Bolts and 8" Scalp Plates)

Weight lbs.Standard

Trim/Control/ Cover PlateUS26D US28 US32D 313 US10 US4/4A 315 2' 3' 4'

98/9949WDC-EO 1894 169 9 1941 1839 1911 1978 2123 2423 15 17 19 Ã98/9949WDC-DT 2090 1895 2137 2049 2121 2136 2342 2633 15 19 23 990DT98/9949WDC-NL 2104 1909 2151 2055 2130 2149 2348 2639 15 19 23 990NL-R/V98/9949WDC-NL-OP 1992 1797 2039 1937 2009 2071 2223 2523 15 19 23 110WD98/9949WDC-TP 2173 1978 2220 2128 2189 2209 2425 2712 16 19 22 990TP-R/V98/9949WDC-K 2231 2036 2278 2194 2313 2272 2554 2778 17 21 25 996K-R/V98/9949WDC-L 2347 2152 2394 2305 2384 2403 2652 2889 21 23 25 996L-R/V

FIRE EXIT HARDWAREWood Door Concealed Vertical Cable Devices(Price includes 249 and 349 Strikes, Sex Bolts and 8" Scalp Plate)

98/9949WDC-EO-F 2194 1999 2241 2139 2211 2278 2423 2723 15 17 19 Ã98/9949WDC-NL-F 2404 2209 2451 2355 2430 2449 2648 2939 15 19 23 990NL-RV98/9949WDC-NL-OP-F 2292 2097 2339 2237 2309 2371 2523 2823 15 19 23 110WD98/9949WDC-TP-F 2473 2278 2520 2428 2489 2509 2725 3012 16 19 22 990TP-R/V98/9949WDC-K-F 2531 2336 2578 2494 2613 2572 2854 3078 17 21 25 996K-R/V98/9949WDC-L-F 2647 2452 2694 2605 2684 2703 2952 3189 21 23 25 996L-R/V

For Concealed Vertical Cable Devices - Less Cable System (LCS) Deduct $846 LIST

98/9949 WDC Standard Door Opening Heights are 6'8", 7'0", 7'2", 8'0", 9'0" and 10'0" Other Door Opening Heights up to 10'0" are available with extended lead time. � Consult factory for lead time.

To order a 98/9949 WDC Scalp Plate only, order part number 050088: US28, US26D $32; US10, US4, 313AN $49; US3, US26 $96


To order a 98/9949 WDC Scalp Plate only, order part number 050088: US28, US26D $32; US10, US4, 313AN $49; US3, US26 $96


3' Devices are priced complete with standard trim and strike(s).2' add $75 list, 4' add $18 list.Cylinders and sex bolts are not included in price unless noted.

For Concealed Vertical Cable Devices prices shown are for Door Opening Heights 6'8" to 8'4". For Door Opening Heights 8'5" to 10'0" add $57 list.Door opening height must be specified when placing an order.


51



Cylinder DoggingNot for use with Fire Exit Hardware

Prefix List AddCD Standard Baseplate Cylinder dogging available on all 98/99 Series Panic Devices

excluding the 2' device.75

CD-CX Center case dogging available on all Chexit 98/99 Rim/27/47/48/49/57 Panic Devices. Specify handing.

339

CI Cylinder Dogging Indicator available on all 98/99 Series Panic DevicesNot available with EL/QEL electrical option, Chexit device or the 2' device.

209

DI Dogging indicator available on all 98/99 Series Panic Devices excluding the 2' device. 192LD Less Dogging available on all 98/99 Series Panic Devices. 35SD Special center case dogging available on 98/99 Rim/27/57/47/48 Panic Devices ONLY.

Can be used with the "EL and QEL" option. Refer to page 53 for pricing. Specify handing.314

Double CylinderSuffix List Add-2 98/99 Rim 256

98/9975 Mortise Device (includes 7500-2 lock) Double Cylinder application available with TP, K, or L functions only. Specify handing.

415

-2SI Double Cylinder with Security Indicator available on 98/99 Rim only. Rim cylinder sold separately. Cylinder with T-Turn available from Schlage, order part # XB 11-979Double Cylinder application with Security Indicator available with TP, K, or L functions only. Specify handing.

447

971220-00 Lock/Unlock label only, order part number 971220-00. 8

Hurricane DeviceHurricane devices are listed with Steelcraft doors. Contact factory for specific requirements. List add prices are for the strike price adjustment only. Mullions are priced separately on page 73.

Prefix List AddHH Available on the following 98/99 Series Panic Devices:

98/99 Rim x 9954 Mullion w/299-F (order mullion as "blank") 12 98/9957 w/299-F Strike 25 98/9927 w/299-F Strike 12 98/9975 Device with Standard Strike NC 98/9947 Device with Standard Strikes NC Less trim requires sexbolts 54

Pneumatic DevicesPrefix List AddPN Available on 98/99 Series Devices 1136

Accessories List PricePNT-1 Pneumatic Power Transfer order part number 012014-36 497PN Connector Pneumatic Connector order part number 051827-00 31PN Tubing 25' length order part number 051828-00 20

50' length order part number 051823-00 27100' length order part number 051824-00 45200' length order part number 051825-00 85

Device Options 98/99



Windstorm DevicesWindstorm devices are certified to comply with ICC 500 Standard for the Design and Construction of Storm Shelters, and the Federal :bZg\ZcXn�BVcV\ZbZci�6\ZcXnÈh�ejWa^XVi^dc�;:B6�(+&�Ã�9Zh^\c�VcY�8dchigjXi^dc�<j^YVcXZ�[dg�8dbbjcîn�HV[Zin# Windstorm devices are listed with Steelcraft Paladin doors for tornado listings and Steelcraft "H" Series doors for Hurricane listings.

Prefix List AddWS Available on the 98/9927/57 Series Devices - Specify Handing

(Not available with EL option and LNL/NL trim function) QEL is available.For Replacement Parts, contact Customer Care 877-671-7011

1009

*For replacement parts, contact Customer Care 877-671-7011 Door Applications - 8' 0" x 8' 0" Pairs (swing same direction) 4' 0" x 8' 0" Single (non-fire rated only) Flush Hollow Metal. UL - FEMA 361 certified. Miami-Dade Co. / FBC will list compliance to: TAS 201, TAS 202, TAS 203. Design Load Rating: +150/-150 PSF (245 MPH Wind Zone) Enhanced Hurricane Protection (EHPA) ASTM E1996 / ANSI/ICC 500 (245 MPH Wind Zone) / UL - ANSI/ICC 500 certified of F5 - Tornado applications.

Less Bottom Rod/Less Bottom LatchSuffixLBR Less bottom rod available with UL Fire Label at no additional charge on 98/9927-F, 98/9947-F and

98/9947WDC-F Devices. LBR devices must be ordered in pairs of vertical rod devices.NC

List PriceLBR KIT Fire Latch Kit, complete auxiliary bolt field replacement kit.

Order part number 050171354

LBL Less bottom latch available on 98/9949A and 98/9949WDC (Panic) Deduct98/9949-F LBL and 98/9949WDC-F-LBL devices must be ordered in pairs of vertical latch devices with one Fire Pin Kit per pair:

101

First Leaf - 98/9949-F LBL / 98/9949WDC-F LBL LBL Only Deduct 101

Second Leaf - 98/9949-F LBL / 98/9949WDC-F LBL LBL Only with Fire Pin Kit Add 20

List Price49 Fire Pin Kit 49 Fire Pin Kit, complete auxiliary bolt field replacement kit. Order part number 051860-32 121

Touchbar OptionsSuffix List AddBRAILLE Vision Impaired Touchpad, Raised Letters and Braille (US32D)

Standard copy "Caution Stairwell." Other copy up to 20 alpha/numeric characters, one line, available, consult factory. Specify handing.

97

"PUSH" Brass, Bronze and Stainless Touchbar trims embossed "PUSH." No additional charge when specified with device. Specify handing.

NC

RSS Red silk-screened lettered Touchbar trims (as standard on SS devices). "Emergency Exit Only, Push to Open and Sound Alarm" No additional charge when specified with device. Specify handing.

NC

KN Knurled Touchpad No additional charge when specified with device.

NC

SG Safety Glow feature - for 3' device 350Safety Glow feature - for 4' device 364

WH Drainage (Weep) Holes in Mechanism Case 3' device will have 4 holes - 6" spacing, 4' device will have 6 holes - 6" spacing

68

CUSTOM GRAPHICS available on pushbar trim. See page 8 for details.

Pullman LatchesNot available for fire door applications

Prefix List AddPL 98/9927 Device PL Top and PL Bottom 187

98/9947 Device PL Top and PL Bottom 267ES 98/9927 Panic Device LBR with PL top Latch for electric strike application. 94

98/9947 Panic Device LBR with PL top Latch for electric strike application. 134CAUTION: A Panic LBR device is only a one point latching instead of two point. Security of the opening may be compromised.

LBL Only

LBL Only


53



Insulclad or Applied PanelNot available for fire door applications

Suffix List AddINS-2 1/2" Panel - for 98/9947 devices. 121INS-4 1/4" Panel - for 98/9947 devices. 202INS-2 KIT-9947 1/2" Panel Kit - for 98/9947 devices - order part number 051841-00 121INS-4 KIT-9947 1/4" Panel Kit - for 98/9947 devices - order part number 051842-00 202INS-2 1/2" Panel - for 98/9949 devices. 121INS-4 1/4" Panel - for 98/9949 devices. 202INS-2 KIT-9949 1/2" Panel Kit - for 98/9949 devices - order part number 24122285 121INS-4 KIT-9949 1/4" Panel Kit - for 98/9949 devices - order part number 24122327 202

Electric Latch RetractionSee 98/99 Product Catalog for required accessory equipment

Prefix List Add EL Electric Latch Retraction - available on all 98/99 Series Devices 709

QEL Quiet Electric Latch Retraction - available on all 98/99 Series Devices 853 HD-EL Electric Latch Retraction with Hex Dogging feature

- available on all 98/99 Series Panic Devices.709

SD-EL Special center case dogging available with “EL” option on 98/99Rim/27/57/47/48 panic devices. Specify handing

1023

SD-QEL Special center case dogging available with “QEL” option on 98/99Rim/27/57/47/48 panic devices. Specify handing

1167

EL Conversion Kit - 3' / 4' Order part number 050070 / 050078 709 HD-EL Conversion Kit - 3' / 4' Order part number 050384 / 050385 709 QEL Conversion Kit - 3' / 4' Order part number 24179244 / 24179251 853 QEL Replacement Kit Order part number 24179269 813

SwitchesPrefix List Add RX Request to Exit - available on all 98/99 Series Devices 191 RX-LC Request to Exit Low Current - available on all 98/99 Series Devices 222 RX-2 Request to Exit Double Switch - available on all 98/99 Series Devices

Note: To convert existing Device with RX switch to RX-2, order RX-AUX part number 050271. $199 List each.238

� WP-RX Waterproof Request to Exit - available on all 98/99 Series Devices 276 * LX Latchbolt Monitoring - available on all 98/99 Series Devices. 191 * LX-LC Latchbolt Monitoring Low Current - available on all 98/99 Series Devices. 222 * LX-RX Request to Exit/Latchbolt Monitoring combination

available on all 98/99 Series Devices290

* LX-RX-LC Request to Exit/Latchbolt Monitoring combination Low Current available on all 98/99 Series Devices

346

SS Signal Switch - for Rim and Vertical Rod Devices -Specify Handing 392Signal Switch - for Mortise Device (includes SS7500 lock) - Specify Handing 220

� Consult factory for lead time.* For Latchbolt monitoring on 98/9975 Mortise Devices specify the SS7500 lock and add $220 list per device.For 98/9949A, LX switch monitors trim input or electric dogging of EL/QEL devices. LX switch does not monitor latch condition. See page 82 for field-installed switch kit part numbers.

(Continued) Device Options 98/99



ELECTRIC UNLOCKINGPrefix List Add E Electric Unlocking of outside trim - for all 98/9975 Mortise Devices.

Available with TP, K, or L functions only "AC" current requires 12 or 24VAC-SO rectifier kit. Add $33 list per device. Specify FAIL SECURE (FSE) or FAIL SAFE (FS).

474

E996 Electric Unlocking of outside E996 Trim - for 98/99 rim, mortise, surface vertical and concealed vertical devices. Available with L or LBE functions only. Specify handing. Available 24VDC, Fail Safe (FS). Can field convert to Fail Secure (FSE). See Page 68 for pricing and optional lever designs.

474

RETROFIT KITS FOR EXISTING 996L TRIM 996 R/VC Conversion to E Kit Order part number 050672 529996 Mort Conversion to E Kit Order part number 050673 550

CHEXITPrefix List Add CX Chexit – Controlled Exit Device - available on all 98/99 Series Devices

15 Second Delay furnished standard. DT Function requires an electric strike to access opening. For CX98/9927 and CX98/9957 panic and fire devices, two Rod Guards (RGO) supplied standard. Add $448 list per device. For door heights over 7' additional RGO's will be added as needed to protect the rods. Each additional RGO is $224 List

1454

Chexit Options: List Add RG-27 Rod and Latch Guards (RG-27) can be substituted. Specify handing. 359 RCM Remote Chexit Module 211

�� * RCM KIT-98 Less Module - specify part number 050376 and finish. 211�� * RCM KIT-99 Less Module - specify part number 050375 and finish. 211

0 Delay 0 Second Delay 107** 30 Delay 30 Second Delay 107 BOCA-15 Delay 15 second delay with BOCA Modification 107** BOCA-30 Delay 30 second delay with BOCA Modification 107** Other Delays 2-60 Seconds in 2 second intervals or infinite delay 142

��Consult factory for lead time * 15 second Module sold separately. Specify part number 050228. ** Infinite Delay and OVER 15 second delay requires a letter of approval from authority having

local jurisdiction. Send letter with sales order. Order cannot be processed without the letter.

Chexit is not available with any electrical options (EL, QEL, PN).Chexit is not available with any switches (RX, RXLC, RX2, WPRX, LX, LXLC, LXRX, LXRXLC, SS)


55



49 Cable System(Device Type and Door Opening Height must be specified when ordering)

Prefix Suffix List PriceCS Complete Cable System Door Opening Heights - 6'8" to 8'4" 846







49 WDC Cable System(Device Type and Door Opening Height must be specified when ordering)

Prefix Suffix List PriceCS Complete Cable System Door Opening Heights - 6'8" to 8'4" 1014







(Continued) Device Options 98/99



XP98/XP99 Series Finish ChartE. Mechanism End

D. CoverB. Touch Bar End (2)

C. Touch Bar Trim

F. Mechanism

A. Center Case

Standard Finishes

ColorUS Number


Bright Brass US3 605 Bright Brass Bright Brass US3, 605 Buffed Anodized

Satin Brass US4 606 Satin Brass Satin Brass US4, 606 Anodized

Satin Bronze US10 612 Plated/Anodized Satin Bronze US10, 725 Anodized

Satin Nickel US15 619 Plated, Clear Powder Coat Satin Stainless Steel US32D, 630 Anodized

Polished Chrome US26 625 Plated Bright Stainless Steel US32, 629 Buffed Anodized

Satin Chrome US26D 626 Powder Coat Satin Stainless Steel US32D, 630 Anodized

Anodized Aluminum US28 628 Powder Coat Satin Stainless Steel US32D, 630 Anodized

Satin Stainless Steel US32D 630 Stainless Steel Satin Stainless Steel US32D, 630 Anodized

Duranodic Dark Bronze 313 710 Powder Coat Powder Coat 313, 710 Powder Coat


Special Finishes

Color US NumberBHMA Number A, B, E C -Touch Bar Trim Finishes D, F

Bright Bronze US9 611 Plated Bright Bronze US9, 611 Buffed Anodized

Satin Bronze, Oil-Rubbed US10B 613 Oil-Rubbed Oil-Rubbed, US10B Powder Coat

Satin Chrome, Antimicrobial US26D-AM 626-AM AM Clear over Chrome



Satin Stainless Steel, Antimicrobial US32D-AM 630-AM AM Clear over Stainless Steel




Powder Coat

XP98 / XP99 Series Sex Bolt Quantities

Application425 Sex Bolt

(Optional)825 Sex Bolt

(Supplied) List AddDT, EO, NL, TP, K or L Device with trim 2

$9.00 eachSex Bolt



99-F Wood Door with trim 2


FINISH NOTES:US15 and US32D available on XP98 Series only.

US15 and US32D available on XP98 Series only.



Series Option Summary XP98/99Type of Device RimFunction EO (Exit Only) DT (Dummy Trim) L (Lever-06 Standard) LDT (Lever-Dummy Trim)NL (Night Latch-Key Retracts) NLOP (Night Latch, Opt. Pull) LNL (Lever-Night Latch) TL (Turn Lever)TLOP (Turn Lever, Opt. Pull) K (Knob) KBE (Knob Blank Escutcheon) KDT (Knob Dummy)KNL (Knob Night Latch) LBE (Lever-Blank Escutcheon) TLBE (Turn Lever - Blank Escutcheon)TP (Thumbpiece) TPBE (Thumbpiece - Blank Escutcheon)Rating None (Panic Exit Device) - F (Fire Exit Device)Device Finish US3 (Bright Brass) US4 (Satin Brass) US10 (Satin Bronze) US10B (Satin Bronze-Oil Rubbed)US26 (Bright Chrome) US26D (Satin Chrome) US28 (Anodized Aluminum) US26D-AM (Antimicrobial)313 (Duranodic Dark Bronze) 315 (Black) 643E (Aged Bronze)US32D / 32D-AM (Satin Stainless Steel) & US15 (Satin Nickel) XP98 Series onlyDevice Length (Feet and Inches) 3' (3' Device for 2' 4" - 3' Door) 4' (4' Device for 2' 10" - 4' Door)Device Handing RHR (Right Hand Reverse) LHR (Left Hand Reverse)Touch Bar Trim Options SS (Emergency Exit- US32D only) EMB (Embossed - Push) BR (Braille) KN (Knurled)Touch Bar Finish US3 (Bright Brass) US4 (Satin Brass) US10 (Satin Bronze) US19 (Flat Black)US32 (Bright Stainless) US32D-AM (Antimicrobial) US32D (Satin Stainless) 313 (Duranodic Dark Bronze)US10B (Satin Bronze-Oil Rubbed)Dogging Options CD (Cylinder Dogging - Panic Only) DI (Dogging Indicator) LD (Less Dogging) CI (Cylinder Dogging Indicator)Switch Options RX (Request to Exit) LXLC (LBM Low Current) RXLC (RX Low Current) RX2 (RX Double Switch)LXRXLC (LBM RX Low Current)Electric Options EL (Electric Latch Retraction) QEL+ (Quiet Electric Latch Retraction)Device Options ALK (Standard Alarm Kit) CYL (Include Cylinder) SNB (Sex Bolts) GBK (Include GBK)SLM (Include SLM Blocking) SEC (Include Security Screws)Strike Series LS (Less Strike) 909 (Std. Panic & Fire) 954 (Opt. Mullion)Strike Finish US19 (Flat Black)Trim Options LT (Less Trim) 996 (Std. Lever Trim) VR910 (Vandal Resistant) 110MD / 110WD (Std. on NL-OP)392-7 (Opt. Pull Dummy Trim) 990 (Std. Rim) E996 (Electric 996) 696 / 696WDF (Opt. Lever Trim)697 / 697WDF (Opt. Lever Trim)Trim Finish US3 (Bright Brass) US4 (Satin Brass) US10 (Satin Bronze) US10B (Satin Bronze-Oil Rubbed)US26 (Bright Chrome) US26D (Satin Chrome) SPBLK (Black Painted) 313 (Duranodic Dark Bronze)US15 (Satin Nickel)

Trim Lever Styles 06 Lever Standard ACC (Accent Lever) AST (Asti Lever) MER (Merona Lever) STA (St. Anne Lever)03K (03 Knurled Lever) 06K (06 Knurled Lever) 01, 02, 03, 05, 06, 07, 12, 16, 17, 18 (Levers)03 SS, 06 SS, 17 SS, Latitude SS, Longitude SS, M57, M62 (Stainless Steel Levers) LAT (Latitude) LON (Longitude)M51, M52, M53, M54, M55, M56, M61, M63, M81, M82, M83, M84, M85Door Material AL (Aluminum Door) HM (Hollow Metal) WD (Wood Door) CP (Composite Door)Door Thickness 1.3/4 (1-3/4" Standard) 2 (2" Thickness) 2.1/4 (2-1/4" Thickness)Door Application D (Double Egress) P (Pair of Doors) S (Single Door)UL Listings 20 (20 Minutes) 45 (45 Minutes / C Label) 60 (60 Minutes) 90 (90 Minutes / B Label)180 (180 Minutes / A Label)

58



3' Devices are priced complete with standard trim and strike(s), 4' add $18 list.Cylinders and sex bolts are not included in price unless noted.

XP98/99 Series Devices


US15 US26 �643E

(Prices includes 909 Strike)

Wt. lbs. Standard Trim/ControlUS26D US28 US32D 313 US10 US4/4A 315 3' 4'

XP98/99EO 1197 1060 1214 1111 1210 1227 1392 1703 14 17 ÃXP98/99DT 1393 1256 1410 1321 1420 1385 1611 1913 17 19 990DTXP98/99NL 1407 1270 1424 1327 1429 1398 1617 1919 17 19 990NL-R&VXP98/99NL-OP 1295 1158 1312 1209 1308 1320 1492 1803 15 18 110MD/WDXP98/99TP 1476 1339 1493 1400 1488 1458 1694 1992 16 20 990TP-R&VXP98/99K 1534 1397 1551 1466 1612 1521 1823 2058 18 21 996K-R&VXP98/99L 1650 1513 1667 1577 1683 1652 1921 2169 19 21 996L-R&V

FIRE EXIT HARDWARERim Devices(Price includes 909 Strike for single door applications. For double door applications the 954 Strike will be supplied at an additional $80 list add.)

XP98/99EO-F 1315 1222 1362 1300 1366 1433 1557 1884 13 16 ÃXP98/99NL-F 1525 1432 1572 1516 1585 1604 1782 2100 16 18 990NL-R&VXP98/99NL-OP-F 1413 1320 1460 1398 1464 1526 1657 1984 14 17 110MD/WDXP98/99TP-F 1594 1501 1641 1589 1644 1664 1859 2173 17 19 990TP-R&VXP98/99K-F 1652 1559 1699 1655 1768 1727 1988 2239 19 20 996K-R&VXP98/99L-F 1768 1675 1815 1766 1839 1858 2086 2350 18 20 996L-R&V

XP Device Options(available on all XP98/99 Series Devices unless noted) List Add

Dogging Options

CD Standard Baseplate Cylinder Dogging available 75 CI Cylinder Dogging Indicator available

Not available with EL/QEL electrical option209

DI Dogging Indicator available 192 LD Less Dogging available 35 SD Special Center Case Dogging available on Panic Devices ONLY

Can be used with the "EL" option. Refer to page 53 for pricing. Specify handling.314

Switch Options

RX Request to Exit 191 RX-LC Request to Exit Low Current 222 RX-2 Request to Exit Double Switch 238 RX-AUX RX to RX-2 Conversion - Order part number 050271. 199� WP-RX Waterproof Request to Exit 276 LX-RX-LC Request to Exit / Latchbolt Monitoring combination Low Current 346 LX-LC Latchbolt Monitoring Low Current. 222

Note: The XP devices require low current to work properly with the LX switch Unlike the RX, this switch is mounted in the head of the device.

See page 82 for field-installed switch kit part numbers.List Add

Electric Options

EL Electric Latch Retraction 709QEL Quiet Electric Latch Retraction 853HD-EL Electric Latch Retraction with Hex Dogging feature 709SD-EL Special Center Case Dogging available with EL option - Specify Handing 1023

List PriceEL Conversion Kit - 3' / 4' Order part number 050070 / 050078 709HD-EL Conversion Kit - 3' / 4' Order part number 050384 / 050385 709QEL Conversion Kit - 3' / 4' Order part number 24179269 / 24179251 853QEL Replacement Kit Order part number 24179269 813� Consult factory for lead time.



59



(Continued) Series Devices XP98/99XP Device Options (Continued) List Add

Electric Unlocking

E996 Electric Unlocking of outside E996 Trim - for XP98/99 rim devices. Available with L or LBE functions only. Specify handing. Available 24VDC, Fail Safe (FS). Can field convert to Fail Secure (FSE). Lever style 06 furnished standard. See page 67 for optional lever designs.

474

Double Cylinder -2 Double Cylinder Option available for TP, K & L functions on XP98/99 RIM Devices

256

XP98/99 Retrofit Kits 313315 US4

Model Description US28 US26D US32D US10XP99-909 98/99 Series Device conversion to XP with

909 strike. Order part number 050676 - Specify finish.723 750 777 744

XP99-954 98/99 Series Device conversion to XP with 954 strike. Order part number 050675 - Specify finish.

805 830 858 825



94/95 Series Finish Chart

B. Touch Bar

A. Touch Bar End Cap

Standard Finishes

Color US NumberBHMA Number A B -Touch Bar Finishes

Bright Brass US3 605 Powder Coat - Black 315, 622 Bright Brass US3Satin Brass US4 606 Powder Coat - Black 315, 622 Satin Brass US4Satin Bronze US10 612 Powder Coat - Black 315, 622 Satin Bronze US10Polished Chrome US26 625 Powder Coat - Black 315, 622 Bright Stainless Steel US32Satin Chrome US26D 626 Powder Coat - Black 315, 622 Satin Stainless Steel US32DAnodized Aluminum US28 628 Powder Coat - Black 315, 622 Satin Stainless Steel US32DDuranodic Dark Bronze 313 710 Powder Coat - Black 315, 622 Powder Coat 313, 710Satin Chrome, Antimicrobial US26D-AM 626-AM AM Clear over 622 AM Clear over Anodized

* Anodized Equivalent No Sex Bolts are needed for the 94/95 Series device.



INPACT Series Options Summary 94/95EXIT HARDWAREType of Device 94/9547 (Concealed Vertical Rod) 94/9548 (Concealed Vertical Rod) 94/9575 (Mortise Lock)Function EO (Exit Only) DT (Dummy Trim) L (Lever-06 Standard) LDT (Lever-Dummy Trim)NL (Night Latch-Key Retracts) LBE (Lever-Blank Escutcheon) TL (Turn Lever) TLBE (Turn Lever - Blank Escutcheon)TLOP (Turn Lever, Opt. Pull) K (Knob)Rating None (Panic Exit Device) - F (Fire Exit Device)Device Finish US3 (Bright Brass) US4 (Satin Brass) US10 (Satin Bronze) US26 (Bright Chrome)US26D (Satin Chrome) US28 (Anodized Aluminum) 313 (Duranodic Dark Bronze) US26D-AM (Antimicrobial)Device Handing RHR (Right Hand Reverse) LHR (Left Hand Reverse)Switch Options LX (Latchbolt Monitoring)Electric Options QEL (Quite Electric Latch Retraction)Device Options CYL (Include Cylinder) PL (Pullman Latch w/ES Strike)Rods For Surface / Concealed Vertical Devices only LBR (Less Bottom Rod) LBRAFL (LBR with Aux. Fire Pin)Strike Series LS (Less Strike) LTS (Less Top Strike) 575 (Std. Mortise) 575-2 (Opt. Mortise)576A/576B (Opt. Mortise) 338 (Std. Concealed Vertical Rod)Bottom Strike Series LBS (Less Bottom Strike) 304L (Mortise) 385A (Adjustable Mortise)Strike Finish US3 (Bright Brass) US4 (Satin Brass) US10 (Satin Bronze) US10B (Satin Bronze-Oil Rubbed)US19 (Flat Black) US32 (Bright Stainless) US32D (Satin Stainless) MD (Molydag)Trim Options LT (Less Trim) LP230 (Opt. Lever Trim) 550 (Opt. Offset Dummy Trim) 392-7 (Opt. Wire Pull Trim)Trim Lever Styles 06 Lever Standard 03, 06, 07, 12, 17 (Levers)Trim / Control Finish US3 (Bright Brass) US4 (Satin Brass) US10 (Satin Bronze) US10B (Satin Bronze-Oil Rubbed)US19 (Flat Black) US26 (Bright Chrome) US26D (Satin Chrome) SP28 (Sprayed Lacquer Aluminum)SPBLK (Black Painted) SP313 (Dark Bronze) US26D-AM (Anti-Microbial)Control Options LC (Less Control) 376T (Thumbturn Control - CV) 940L (Lever Control)Control Lever Styles 06 Lever Standard 03, 06, 07, 12, 17 (Levers) AST (Asti Lever)* ACC (Accent Lever)* MER (Meronia Lever)*STA (St. Anne Lever)* 01, 02, 05, 16, 18 (Levers)* 03K (03 Knurled Lever)* 06K (06 Knurled Lever)*03 SS, 06 SS, 17 SS, LAT SS, LON SS, M57, M62 (Stainless Steel Levers)*M51, M52, M53, M54, M55, M56, M61, M63, M81, M82, M83, M84, M85Door / Frame Material HM (Hollow Metal)Door Thickness 1.3/4 (1-3/4" Standard)Door Application D (Double Egress) P (Pair of Doors) S (Single Door)Mortise Lock LL (Less Lock) SS7500IN 7500INMortise Lock Finish US3 (Bright Brass) US4 (Satin Brass) US10 (Satin Bronze) US10B (Satin Bronze-Oil Rubbed)US19 (Flat Black) US32 (Bright Stainless) US32D (Satin Stainless) SP28 (Sprayed Lacquer Aluminum)UL Listings 20 (20 Minutes) 45 (45 Minutes / C Label) 60 (60 Minutes) 90 (90 Minutes / B Label)180 (180 Minutes / A Label)



Devices 3' to 4' are priced complete with standard trim, and strike(s). Cylinders are not included in price.

94/95 INPACT Series Device

EXIT HARDWAREConcealed Vertical Rod Devices(Prices includes 338 and 385 Strikes)

Standard Trim/ControlUS26D US28 313 US10 US4 US3 US26

Weight lbs.

94/9547EO 1320 1238 1258 1325 1383 1472 17 Ã94/9547DT 1716 1634 1654 1721 1712 1878 19 550DT94/9547L 1839 1757 1793 1883 1902 2056 22 940L94/9547L-BE 1839 1757 1793 1883 1902 2056 22 940L-BE94/9547L-DT 1905 1823 1861 1945 1968 2092 22 940L-DT94/9547TL 2280 2198 2218 2315 2198 2489 22 550DT/376T

Mortise Lock Devices(Price includes 575 strike)

94/9575EO 1604 1521 1562 1626 1686 1774 17 Ã94/9575DT 2000 1917 1958 2022 2015 2180 19 550DT94/9575NL 2000 1917 1958 2022 2015 2180 22 550DT94/9575L 2123 2040 2097 2184 2205 2358 22 940L94/9575L-BE 2123 2040 2097 2184 2205 2358 22 940L-BE94/9575L-DT 2189 2106 2165 2246 2271 2394 22 940L-DT

FIRE EXIT HARDWAREConcealed Vertical Rod Devices(Price includes 338 and 385A strikes)

94/9547EO-F 1524 1448 1486 1548 1611 1749 17 Ã94/9547L-F 2043 1967 2021 2106 2130 2333 22 940L94/9547L-BE-F 2043 1967 2021 2106 2130 2333 22 940L-BE94/9547TL-F 2484 2408 2446 2538 2426 2766 22 550DT/376T

Mortise Lock Devices(Price includes 575 strike)

94/9575EO-F 1812 1739 1793 1851 1919 2055 17 Ã94/9575NL-F 2208 2135 2189 2247 2248 2461 22 550DT94/9575L-F 2331 2258 2328 2409 2438 2639 22 940L94/9575L-BE-F 2331 2258 2328 2409 2438 2639 22 940L-BE

Additional Features List Add(Available on all 94 / 95 Series unless noted)

2' 6" up to 2' 9 7/8" Door Add per Device 132Signal Switch SS7500-IN 94/9575 Signal Switch Mortise Lock 220

SuffixLess Bottom Rod LBR Available with UL Fire Label at no additional charge on 94/9547-

F Devices.N/C

PrefixSwitch Options LX Latchbolt Monitoring . Order 050226 for field replacement. 191Electric Options QEL Quite Electric Latch Retraction 853

QEL Retrofit Kit Must specifiy model, rating, door width and finish. 853QEL W/LX Retrofit Kit Must specifiy model, rating, door width and finish. 1044

63



Series Finish Chart 2670

EMERGENCY EXIT ONLY

ALARM WILL SOUND


D. Mechanism Case


C. Touch Bar

B. Touch Bar End Cap

Standard Finishes

ColorUS Number

BHMA Number A B, E C -Touch Bar Finishes D

Anodized Aluminum US28 628 Powder Coat Plastic - Silver Satin Stainless Steel US32D, 630 AnodizedDuranodic Dark Bronze 313 710 Powder Coat Plastic - Brown Duranodic Dark Bronze 313, 710 Powder CoatBlack 315 711 Powder Coat Plastic - Black Black 315, 711 Powder Coat



(Optional) List Add

Aluminum Door 6 $9.00 each Sex Bolt



2670 (Guard-X) Series Option Summary

GUARD-X Exit Alarm Lock

Type of Device 2670Device Finish US28 (Anodized Aluminum) 313 (Duranodic Dark Bronze) 315 (Black)

Device Length 36" to 48" Door WidthDevice Handing RHR (Right Hand Reverse) LHR (Left Hand Reverse)Device Options SNB (6 - # 325 Sex Bolts recommended for Alum doors) CYL (3216 Rim Cylinder)Pushpad SignENG (English w/Braille Standard) FR (French) SP (Spanish)Strike Series LS (Less Strike) 267 (Standard) 2609 (Double Door Strike)Strike Finish US19 (Flat Black)Trim Options LT (Less Trim) 210DT (Dummy Pull Trim) 230DT (Dummy Pull Trim)Trim Finish SP28 (Laquer Sprayed Aluminum) SP313 (Dark Bronze)Door Material AL (Aluminum Door) HM (Hollow Metal) WD (Wood Door)Door Thickness 1.3/4 (1-3/4" Standard)Door Application S (Single Door) P (Pair of Doors w/Mullion)

Locks are priced complete with strike, screw pack, and battery. Rim cylinders and Sex Bolts are not included and must be ordered separately.(Price includes 267 strike)

Model No. Description US28 313 315 Wt. lbs.2670 (36" to 48" Door Width) 483 483 483 15

REFERENCE NOTES:Pushpad Sign furnished in English w/Braille standard. French and Spanish language available at no additional charge.

Accessories:Model No. Description US19 SP28 SP313 US26D US10BPT790 9-Volt External Power Supply 129 Ã Ã Ã Ã210DT x 050140 Dummy Pull Trim and Screw Pack Ã 62 62 Ã Ã230DT x 050140 Dummy Pull Trim and Screw Pack Ã 114 114 Ã Ã3216 Rim Cylinder Ã Ã Ã 68 682609 Double Door Strike 85 Ã Ã Ã Ã267 267 Strike Pkg 29 Ã Ã Ã Ã

65



Rim Strikes Standard Optional

Model No. DescriptionNon

Finished US19US26D US32D

US4 US10

US10BUS3

US26 Wt. lbs. 264 22/88/98/99, 98/9957 Panic - Optional Ã 78 90 - - 0.25 268 88 Fire - Standard Ã 97 *113 129 136 0.38 299 22/88/98/99, 98/9957 Panic - Standard Ã 46 57 57 73 0.30 299F 22/98/99 Fire, 98/9957 Fire - Standard Ã 60 *79 92 106 0.30 499F 22/98/99 Fire w/9954 Mullion - Standard Ã 140 *146 Ã Ã 0.45 1408 Panic w/5754 Mullion - Standard 211 Ã Ã Ã Ã 0.30 1409 55 Panic - Standard/22 - Optional 113 Ã Ã Ã Ã 0.30 1410 Panic, Integral Stop - Optional 113 Ã Ã Ã Ã 0.30 1439 33A/35A Panic - Standard/22 - Optional 113 Ã Ã Ã Ã 0.30 1606 Panic, Sgl or Pr w/1654 Mullion - Optional 57 Ã Ã Ã Ã 0.20** 1609 Panic - Optional Ã 78 87 87 94 0.30** 1610 88 Panic, Stock HM Doors - Optional Ã 78 87 87 94 0.30 267 2670 GUARD-X - Standard Ã 29 Ã Ã Ã 2609 2670 GUARD-X, Pairs - Optional Ã 85 Ã Ã Ã 909 XP98/99 - Standard Ã 60 Ã Ã Ã 0.30 954 XP98/99 Mullion - Optional Ã 140 Ã Ã Ã 0.45

* US32D finish only. ** 1609 and 1610 must be used with coordinator. Not a UL Fire Exit Hardware listed application.

Vertical Rod Top Strikes 249 33/3549A/98/9949 includes shims and fasteners 36 Ã Ã Ã Ã Ã

260U22/33A/35A/88/98/9927/57 Panic, Flush Transom Ã 78 87 87 106 0.30

260U-F 22/33A/88/98/9927/57 Fire Flush Transom Ã Ã 216 Ã Ã 0.00 264 22/33A/35A/88/98/9927/57 Panic - Optional Ã 78 90 Ã Ã 0.25 266 33A/35A27 Panic - Standard Ã 87 *97 110 123 0.25

28333A/35A/98/9947WDC, Wood Frames - specify door thickness 49 Ã Ã Ã Ã 0.10

299 22/88/98/9927/57 Panic - Standard Ã 46 *57 57 73 0.30 299F 22/98/9927 Fire - Standard Ã 60 79 92 106 0.30 338 33A/35A/98/9947 and WDC - Standard 49 Ã Ã Ã Ã 0.35 499F 33/3527A/98/9927 LBR Fire, Pairs - Standard Ã 140 *146 Ã Ã 0.45 471U 5547 Panic, HM Frame - Standard 46 Ã Ã Ã Ã 0.10 472U 5547WDC, 1-3/4" Dr, WD Frame - Standard Ã 46 48 50 64 0.10 473U 5547WDC, 2-1/4" Dr, WD Frame - Standard Ã 46 48 50 64 0.10

* US32D finish only.

Vertical Rod Bottom Strikes 248L-4 22/33A/35A/98/9927, 98/9957 Panic - Standard 44 Ã Ã Ã Ã 0.15 301L 55/8847 Fire - Standard 102 Ã Ã Ã Ã 0.35 304L 22/33A/35A/98/9927, 98/9957 - Standard 44 Ã Ã Ã Ã 0.25 349 33/3594A/98/9949 includes anchors and fasteners 20 Ã Ã Ã Ã * 385A 33A/35A/98/9947/48 and WDC - Standard 96 Ã Ã Ã Ã 0.80

* The 385A is recommended over the 304L for wood door applications based on it's adjustability.

Mortise Lock Strikes 575 55/88/98/9975 - Standard 36 Ã 49 94 108 0.20 575-2 55/88/99/9875, Pairs 1-3/4" Dr - Optional 36 Ã 49 94 108 0.20 576A 55/88/98/9975, Pairs 1-3/4" Dr - Optional 97 Ã 102 115 128 0.20 576B 55/88/99/9875, Pairs 2-1/4" Dr - Optional 97 Ã 102 115 128 0.20

Strikes



22 Series Trim

Model No. DescriptionSP28 SP313

US26D US10B Wt. lbs.

STANDARD: 210DT Dummy Trim 49 Ã 1.3 210NL Night Latch 57 Ã 1.4 210K Knob 221 Ã 1.8 230L Lever 217 Ã 2.0 230TP Thumbpiece 216 Ã 2.5

OPTIONAL: 210K-BE Knob, Blank Escutcheon 221 Ã 1.8 230EO Exit Only Trim Plate 90 Ã 1.0 230DT Dummy Trim 100 Ã 2.1 230NL Night Latch 110 Ã 2.2 230L-BE Lever, Blank Escutcheon 217 Ã 2.0 230TP-BE Thumbpiece, Blank Escutcheon 216 Ã 2.5 110MD-NL Night Latch Cylinder Assembly - HM Door Ã 98 0.4 110WD-NL Night Latch Cylinder Assembly - WD Door Ã 98 0.4

33A/35A Series Trim US3

Model No. Description US26DSPBLK US10B US10 US4

US15 US26�643E Wt. lbs.

STANDARD: 386DT Dummy Trim 268 268 377 268 317 2.7 386NL Night Latch - Specify handing 473 473 585 473 559 3.5 388 Night Latch Cylinder Trim 232 232 338 217 232 1.0

US26D US10B US10 US4

US3 SPBLK US26�643E Wt. lbs.

OPTIONAL: 550DT Dummy Trim - only available with 388 cyl. trim (Rim only) 396 396 396 329 406 2.0 392-6 Dummy Offset Pull 163 Ã Ã Ã Ã 1.0 Antimicrobial coating is available in US26D (US26D-AM) finish, $25 list add.

�Consult factory for lead time.

For other possible trim applications not shown, consult Von Duprin.

Trims

67



55 Series Trim US3US 26

SPBLK�643EModel No. Description US26D US10B US10 US4 Wt. lbs.

STANDARD: 550DT Dummy Trim 396 396 396 329 406 2.0 555NL Night Latch Trim - HM Door 581 581 590 474 596 2.0 556NL Night Latch Trim - WD Door 581 581 590 474 596 2.0 609DT Dummy Trim 278 278 306 232 308 2.5 110MD-NL Night Latch Cylinder Assembly - HM Door 98 98 98 93 100 1.0 110WD-NL Night Latch Cylinder Assembly - WD Door 98 98 98 93 100 1.0 555NL-CA Night Latch Cylinder Assembly - HM Door 279 279 280 242 288 1.0 556NL-CA Night Latch Cylinder Assembly - WD Door 279 279 280 242 288 1.0

88 Series Trim Specify device type when ordering (example: 880TP-V)

US3US 26

SPBLK�643EModel No. Description Device Type US26D US10B US10 US4 Wt. lbs.

STANDARD: 880EO Exit Only Trim Plate R or V&M 157 166 190 112 194 1.0 880DT Dummy Trim R, V&M or V-SA 204 218 259 158 263 2.9 880NL Night Latch R or M 218 235 278 167 283 2.9 880TP Thumbpiece R, V, or M 225 239 314 213 316 2.1 880TP-BE Thumbpiece, Blank Escutcheon R, V, or M 225 239 314 213 316 2.1 880K Knob R, V, or M 263 282 333 213 337 2.7 880K-BE Knob, Blank Escutcheon R, V, or M 263 282 333 213 337 2.7 880K-DT Knob, Dummy R, V, or M 263 282 333 213 337 2.7 880K-NL Knob, Night Latch R only 263 282 333 213 337 2.7OPTIONAL: 608DT Dummy Trim Ã 286 286 348 225 352 2.5 608NL Night Latch R or M 286 286 348 225 352 2.5 608TP Thumbpiece R, V or M 307 307 375 239 376 2.9 608TP-BE Thumbpiece, Blank Escutcheon R or M&V 307 307 375 239 376 2.8 606K Knob Ã 319 319 339 264 343 2.4 606K-BE Knob, Blank Escutcheon Ã 319 319 339 264 343 2.4 606K-DT Knob, Dummy Ã 319 319 339 264 343 2.4 REFERENCE NOTE:When using 880EO / NL / TP / TP-BE / K / K-BE / K-NL on 88-F Rim devices on wood or composite Fire Labeled doors use trim suffix "WDF" (no additional charge) ex. 880WDF-EO

98/99 Series Trim Specify device type when ordering (example: 990TP-R)

US3US15 US26�643EModel No. Description

Device Type US26D

*US32 *US32D

SP313 US10B SPBLK US10 US4

Weight lbs.

STANDARD: 990EO Exit Only Trim Plate Ã 126 Ã 132 132 163 109 148 1.1 990DT Dummy Trim Ã 196 Ã 210 210 210 158 219 2.8 990NL Night Latch R&V or M 210 Ã 216 216 219 171 225 2.9 990TP Thumbpiece R&V or M 279 Ã 289 289 278 231 302 2.1 990TP-BE Thumbpiece, Blank Escutcheon R&V or M 279 Ã 289 289 278 231 302 2.1 996K Knob R&V or M 337 Ã 355 355 402 294 431 4.1 996K-BE Knob, Blank Escutcheon R&V or M 337 Ã 355 355 402 294 431 4.1 996K-DT Knob, Dummy R&V or M 328 Ã 342 342 389 289 413 4.1 996K-NL Knob, Night Latch R&V or M 328 Ã 342 342 389 289 413 4.1 110MD-NL Night Latch Cyl. Assy, MD Dr Ã 98 Ã 98 100 98 93 100 0.4 110WD-NL Night Latch Cyl. Assy, WD Dr Ã 98 Ã 98 100 98 93 100 0.4�Consult factory for lead time.


(Continued) Trims



98/99 Series Trim (continued) Specify device type when ordering (example: 990TP-R)

US3US15 US26�643EModel No. Description

Device Type US26D

*US32 *US32D

SP313 US10B SPBLK US10 US4

Weight lbs.

Lever Trim with Standard Lever Designs 996L Lever R&V or M 453 545 466 466 473 425 529 3.8 996L-BE Lever, Blank Escutcheon R&V or M 453 545 466 466 473 425 529 3.8 996L-DT Lever, Dummy Ã 353 438 364 364 406 346 422 3.8 996L-NL Lever, Night Latch R&V or M 353 438 364 364 406 346 422 3.8996L Standard Lever Design Notes:The #06 lever is furnished standard. Optional lever designs, #01, #02, #03, #05, #07, #12, #16, #17, #18, Accent, Asti, Merano, St. Annes, Latitude and Longitude Levers are available at no additional charge.* Optional Stainless Steel Levers 03 SS, 06 SS, 17 SS, Latitude SS, Longitude SS are available in US32D or US32.The US32D SS lever will have a US15 Finish trim plate. The US32 SS lever will have a US26 trim plate.996 lever trim handing is field reversible, except #12 design. Lever trims furnished RHR if handing is not specified.Optional Knurled Levers available on #06 and #03 Lever designs. Specify with "KN" suffix, $81 list add.Through Special Order the 02 and 17 are available Knurled. Specify with"KN" suffix, $122 list add.

Lever Trim with M Collection Lever Designs 996L Lever R&V or M 544 544 544 544 544 544 544 3.8 996L-BE Lever, Blank Escutcheon R&V or M 544 544 544 544 544 544 544 3.8 996L-DT Lever, Dummy Ã 437 437 437 437 437 437 437 3.8 996L-NL Lever, Night Latch R&V or M 437 437 437 437 437 437 437 3.8996 L with M Collection Lever Design Notes:Available Jan 2014 - M51, M52, M54, M56, M61, M63, M81, M83, M84, M85Available April 2014 - M53, M55, M57, M62, M82* All M Collection Stainless Steel levers available in US32D or US32.The US32D SS lever will have a US15 Finish trim plate. The US32 SS lever will have a US26 trim plate.M57 and M62 available in Stainless Steel only.Handed Levers - M61, M63, M85, M62. Specify handing. Lever trims furnished RHR if handing is not specified.Optional Knurled Levers available on M51, M52, M81. Specify "KN" suffix, $81 list add.

NOTE ON 996L AND 996L-BE:Electric Unlocking of outside E996 trim for 98/99 rim, mortise, surface and concealed devices. Available 24VDC, Fail Sale (FS). Can field convert to Fail Secure(FSE). Specify with "E" prefix, $474 list add per trim. Request to Exit RX996 trim. For 98/99 rim, mortise, surface and concealed devices. Specify with "RX" prefix, $191 list add per trim.

OPTIONAL: 696DT Dummy Trim Ã 304 Ã 304 304 291 237 337 2.5 696NL Night Latch R&V or M 328 Ã 328 328 316 263 358 2.5 696TP Thumbpiece R&V or M 372 Ã 353 353 369 298 427 2.9 696TP-BE Thumbpiece, Blank Escutcheon R&V or M 372 Ã 353 353 369 298 427 2.9 697DT Dummy Trim Ã 304 Ã 304 304 291 237 337 2.5 697NL Night Latch R&V or M 328 Ã 328 328 316 263 358 2.5 697TP Thumbpiece R&V or M 372 Ã 353 353 369 298 427 2.9 697TP-BE Thumbpiece, Blank Escutcheon R&V or M 372 Ã 353 353 369 298 427 2.9 996EO Exit Only Trim Plate R&V or M 259 Ã 267 267 302 255 316 Ã 392-7 Dummy Wire Pull Ã 179 Ã Ã Ã Ã Ã Ã 1.0

REFERENCE NOTES:When using 696NL / TP / TP-BE or 697NL / TP / TP-BE with 99-F Rim devices on wood or composite Fire Labeled doors use trim suffix "WDF" (no additional charge) ex. 696WDF-NL

996 LEVER TRIM REFERENCE NOTES:The #06 lever is furnished standard. Optional lever designs, #01, #02, #03, #05, #07, #12, #16, #17, #18, Accent, Asti, Merano, St. Annes, Brass Latitude and Brass Longitude Levers are available at no additional charge. * Optional Stainless Steel Levers 03 SS, 06 SS, 17 SS, Latitude SS, Longitude SS are available in US32D or US32. The US32D SS lever will have a US15 Finish trim plate. The US32 SS lever will have a US26 trim plate. 996 lever trim handing is field reversible, except #12 design. Lever trims furnished RHR if handing is not specified. Optional Knurled Levers available on #06 and #03 Lever designs. Specify with "KN" suffix, $81 list add. Through Special Order the 02 and 17 are available Knurled. Specify with"KN" suffix, $122 list add.

�Consult factory for lead time.


Trims (Continued)

69



94/95 Series ControlsLever Control with Standard Lever Designs Model No. US26D

SP313�SPBLK US10 US4

US3US26

940L 519 535 558 519 584 940L-BE 519 535 558 519 584 940L-DT 585 603 620 585 620940L with Standard Lever Design Notes:The #06 lever is furnished standard. Optional lever designs, #01, #02, #03, #05, #07, #12, #16, #17, #18, Accent, Asti, Merano, St. Annes, Latitude and Longitude Levers are available at no additional charge.940 lever trim handing is field reversible, except #12 design. Lever trims furnished RHR if handing is not specified.Optional Knurled Levers available on #06 and #03 Lever designs. Specify with "KN" suffix, $81 list add.Through Special Order the 02 and 17 are available Knurled. Specify with"KN" suffix, $122 list add.

Lever Control with M Collection Lever Designs 940L Lever 599 599 599 599 599 940L-BE Lever, Blank Escutcheon 599 599 599 599 599 940L-DT Lever, Dummy 635 635 635 635 635 940L with M Collection Lever Design Notes:Available Jan 2014 - M51, M52, M54, M56, M61, M63, M81, M83, M84, M85Available April 2014 - M53, M55, M57, M62, M82M57 and M62 available in Stainless Steel only.Handed Levers - M61, M63, M85, M62. Specify handing. Lever trims furnished RHR if handing is not specified.Optional Knurled Levers available on M51, M52, M81. Specify "KN" suffix, $81 list add.

Dummy Cross Bars

Dummy Touch Bars

Model No. US26D US10B US10 US4

US3 US26

SPBLK 55DU 1426 1426 1666 1342 1776 88DU 758 758 789 636 887ADDITIONAL FEATURES: Crossbar Monitor Switch in end case. Prefix “RX”, $191 list add.

Model No. US26D US28 US32D 313US4

US10US3

US26 315 US15 330 615 510 Ã 576 551 615 1118 Ã 350 615 510 648 576 551 615 1118 615For 4 ' Device add $18 ListUS32D finish available on 350 Series only.

Optional FeaturesPrefix List Add RX Request to Exit Switch . Order part number 050251 for field replacement. 191 RX-2 Double RX - Request to Exit Switch . Order part number 050270 for field replacement. 238� WP-RX Waterproof Request to Exit - available 276 SS Signal Switch. Specify handing. 392 REFERENCE NOTES: When used with outside trim for back to back mounting, finished fasteners will be supplied at an additional $10.50 list add.To convert existing device with RX switch to a RX-2 switch, order RX-AUX switch, part number 050271. $199 list each.



(Continued) Trims



Levers US10B US3 US26�643E

US15

Model No. DescriptionUS26D SPBLK

*US32*US32D US10 US4

35A/98 ONLY

Weight lbs.

371L Lever, Key unlocks - 5547/8847-F 564 Ã 632 486 611 Ã 5371L-BE Lever, Blank Escutcheon - 5547/8847-F 537 Ã 571 454 578 Ã 5373L Lever, Key unlocks - 88 Rim, 8827/8875 517 Ã 446 446 611 Ã 3373L-BE Lever, Blank Escutcheon - 88 Rim, 8827/8875 491 Ã 420 420 578 Ã 5373L-DT Lever, Dummy - 88 Rim, 8827/8875 479 Ã 402 402 564 Ã 4375L Lever, Key unlocks - 5575 668 Ã 768 592 761 Ã 4375L-BE Lever, Blank Escutcheon - 5575 641 Ã 741 561 729 Ã 6375L-DT Lever, Dummy - 5575 626 Ã 728 550 717 Ã 5376L Lever, Key unlocks - 5547 675 Ã 675 596 720 Ã376WDC-L Lever, WD - Key unlocks - 5547WDC 675 Ã 675 596 720 Ã376WDC-L-BE Lever, WD, blank escutcheon - 5547WDC 648 Ã 648 569 695 Ã376L-BE Lever, Blank Escutcheon - 5547/8847-F 648 Ã 648 569 695 Ã378L Lever, Key Unlocks - 237 564 Ã 594 486 611 Ã 5378L-BE Lever, Blank Escutcheon - 237 537 Ã 571 454 578 Ã 5379L Lever, Key Unlocks - 55 rim 676 Ã 606 606 768 Ã379L-BE Lever, Blank Escutcheon - 55 Rim 649 Ã 584 584 735 Ã

Control Lever with Standard Lever Designs360L Lever, Key unlocks - 33/35A Rim, 33/3527A, 33/3547A 542 605 571 470 589 589 3360L-BE Lever, Blank Escutcheon - 33/35A Rim, 33/3527A, 33/3547A 516 573 550 435 557 557 5360L-DT Lever, Dummy - 33/35A Rim, 33/3527A, 33/3547A 501 558 530 426 542 542 5�Consult factory for lead time.

360L Standard Lever Design Notes:The #06 lever is furnished standard.Optional lever designs, #01, #02, #03, #05, #07, #12, #16, #17, #18, Accent, Asti, Merano, St. Annes, Latitude and Longitude Levers are available at no additional charge.* Optional Stainless Steel Levers 03 SS, 06 SS, 17 SS, Latitude SS, Longitude SS are available in US32D or US32.The US32D SS lever will have a US15 Finish trim plate. The US32 SS lever will have a US26 trim plate.360 lever trim handing is field reversible, except #12 design. Lever trims furnished RHR if handing is not specified.Optional Knurled Levers available on #06 and #03 Lever designs. Specify with "KN" suffix, $81 list add.Through Special Order the 02 and 17 are available Knurled. Specify with"KN" suffix, $122 list add.

Control Lever with M Collection Lever Designs360L Lever, Key unlocks - 33/35A Rim, 33/3527A, 33/3547A 604 604 604 604 604 604 3360L-BE Lever, Blank Escutcheon - 33/35A Rim, 33/3527A, 33/3547A 572 572 572 572 572 572 5360L-DT Lever, Dummy - 33/35A Rim, 33/3527A, 33/3547A 557 557 557 557 557 557 5

360L with M Collection Lever Design Notes:Available Jan 2014 - M51, M52, M54, M56, M61, M63, M81, M83, M84, M85. Available April 2014 - M53, M55, M57, M62, M82.* All M Collection Stainless Steel levers available in US32D or US32.The US32D SS lever will have a US15 Finish trim plate. The US32 SS lever will have a US26 trim plate.M57 and M62 available in Stainless Steel only.Handed Levers - M61, M63, M85, M62. Specify handing. Lever trims furnished RHR if handing is not specified.Optional Knurled Levers available on M51, M52, M81. Specify "KN" suffix, $81 list add.

360L Control Reference Notes:The #06 lever is furnished standard. Optional lever designs, #01, #02, #03, #05, #07, #12, #16, #17, #18, Accent, Asti, Merano, St. Annes, Brass Latitude and Brass Longitude Levers are available at no additional charge. * Optional Stainless Steel Levers 03 SS, 06 SS, 17 SS, Latitude SS, Longitude SS are available in US32D or US32.The US32D SS lever will have a US15 trim plate. The US32 SS lever will have a US26 trim plate.

Controls

71



Alarm Kits

Model No. DescriptionSP28 SP313

US10B US26D US10 US4

US3 SPBLK US26

#10WDA 370 Series Controls on Wood Doors Ã 39 39 39 3933A-WDA 360 Series Controls on Wood Doors Ã 39 39 39 39229 22 Rim Device 80 Ã Ã Ã Ã589 5575L Device on Wood Doors Ã 121 164 141 152882 88 Rim Device Ã 119 Ã 103 133887 88 Rim/8827 Pairs with ANSI 161 door cutout Ã 119 Ã 103 Ã888 8875 or 8827 with ANSI 161 door cutout Ã 119 Ã 103 Ã889 373L Control with Sexbolts - specify device type R, M or V Ã 180 183 171 188997 98/99 Rim Device 80 Ã 80 80 Ã998 994L Trim retrofit Plate Ã 72 58 58 93

Model No. US15SP28 SP313

US4 US28 US10

313 US32D

US3 US26

315Weight

lbs.22 ALK Ã 420 Ã Ã Ã 2.233A-ALK Ã Ã 474 Ã 474 1.135A-ALK 474 Ã 474 Ã 474 1.198 ALK 474 Ã 474 501 474 1.199 ALK Ã Ã 474 Ã 474 1.1

OPTIONS:Auto reset available in 1 1/2, 3 and 4.5 minute increments. $80 list add. Specify AR1.5, AR3 or AR4.5.

REFERENCE NOTES:Above prices include switch kit - "RX" is standard, "LX" is optional at no charge. To order "Less Switch", deduct $191 list.When ordering alarm kits separate from devices, the 3' device kit is furnished standard. Specify 4' if required, no additional charge.The "EI" External Inhibit feature is standard on the ALK at no additional charge.

Cover Plates

(Continued) ControlsThumbturns US10B US3 US15Model No. Description US26D

SPBLK*US32

*US32D US10 US4US26�643E

35A/98 ONLY

Weight lbs.

360T Thumbturn - 33/35A Rim 564 Ã 594 486 611 611 4360T-BE Thumbturn, Blank Escutcheon - 33/35A Rim 537 Ã 571 454 578 578 4374T Thumbturn - 33/3527A, 98/9927 564 Ã 594 486 611 611 5374T-BE Thumbturn, Blank Escutcheon - 33/3527A, 98/9927 537 Ã 571 454 578 578 5376T Thumbturn - 33/3547A, 5547, 8847 564 Ã 594 486 611 611 4376T-BE Thumbturn, Blank Escutcheon - 33/3547A, 5547, 8847 537 Ã 571 454 578 578 4376WDC-T Thumbturn, WD - 33A/35A/55/98/9947WDC 564 Ã 594 486 611 611 4376WDC-T-BE Thumbturn, Blank Escut., WD - 33A/35A/55/98/9947WDC 537 Ã 571 454 578 578 4377T Thumbturn - 8827 564 Ã 594 486 611 Ã 4377T-BE Thumbturn, Blank Escutcheon - 8827 537 Ã 571 454 578 Ã 4� Consult factory for lead time.Electric Unlocking of outside controls available on the Lever or Thumbturn (except with mortise lock devices). 24VDC furnished standard. 12VDC available, consult factory for lead time. Specify handing and Fail Secure (FSE) or Fail Safe (FS). Must be furnished "BE". Specify with "E" prefix, $474 list add per control.

For Solid Wood or Composite Doors using 370 Series Control with "L" or "T" functions, the 10WDA Cover plate is required. For Solid Wood or Composite Doors using 360L or 360T Controls the 33A-WDA Cover Plate is required.

Blank Plates360EO Blank Plate - 33A/35A Rim, 33/3527A, 33/3547A 263 Ã 276 227 284 284373EO Blank Plate - 88, 8827, 8875 263 Ã 276 227 284 Ã374EO Blank Plate - 33/3527A, 98/9927 263 Ã 276 227 284 Ã376EO Blank Plate - 3347, 8847 263 Ã 276 227 284 Ã

See Device pages for Electric Unlocking of Outside Controls available on the Lever or Thumbturn controls



Mortise Locks

Cylinders

Model No. Description

Sprayed finish to Match US4, US10, US19,

SP28, SP313 Wt. lbs.98/99GBK-R/M 1/4" 98/99 Rim/Mortise 54 2.298/99GBK-CV 1/4" 98/99 Concealed Vertical 54 2.298/99GBK-CV-WDC 1/4" 98/99 Concealed Vertical for Wood Doors 54 98/99GBK-V 1/4" 98/99 Surface Vertical 76 2.498/99GBK-R-499F 1/4" 98/99 Rim used with 499-F Strike 76 3.6XP98/99GBK-R/M 1/4" XP98/99 Rim/Mortise 85XP98/999GBK-R-954 1/4" XP98/99 Rim used with 954 Strike 8533A/35A-GBK-R 1/4" 33A/35A Rim 5433A/35A-GBK-SV 1/4" 33A/35A Surface Vertical 7633A/35A-GBK-CV 1/4" 33A/35A Concealed Vertical 5422GBK-R 1/4" 22 Rim 54 2.222GBK-V 1/4" 22 Surface Vertical 76 2.422GBK-R-499F 1/4" 22 Rim used with 499-F Strike 76 3.6

Model No. Description US32D

US3, US4, US19, US10,

US10B, US32 Wt. lbs.

7500 Standard Mortise Lock 510 525 3.57500-2 Double Cylinder Mortise Lock 769 783 3.57500-IN INPACT Device Mortise Lock 632 648 3.5E7500 Electric Unlocking Mortise Lock 984 999 3.5SS7500 Signal Switch Mortise Lock 730 745 3.5SS7500-IN 94/9575 Signal Switch Mortise Lock 852 868 3.5

The 7500 Lock Face Plate is of Stainless Steel material, plated to match device finishes. E7500 Information: The E7500 mortise lock is furnished standard 24VDC. Specify 12VDC if required at no additional charge. For the E7500 mortise lock “AC” requires SO-12 or SO-24 Rectifier Kit, $33 list add to each E7500 mortise lock. Specify voltage/current 24VAC or 12VAC. For the E7500, specify FAIL-SECURE (FSE) or FAIL SAFE (FS). E7500 lock available for use with “TP”, “K” or “L” functions only.

See catalog section on SS7500 or E7500 for required accessory equipment.


US4 US10 US10B US26D

Weight lbs.

3215 Mortise 1-1/4" - 20-001 XQ11-949 68 0.73216 Rim 68 0.63218 Dummy 68 0.1

Note: Custom keying is not available

Glass Bead Kits

73



Von Duprin Mullions are furnished for flat sills. Strikes are not included except where indicated.

When required, strikes should be ordered with devices.

Mullions

Steel Mullions With KR option

Model No. DescriptionFor Openings

Up To:For Openings

Up To:SP28 SP313

Weight lbs.

1654 Prepped for two 1606 Strikes - If 1606 strikes are not specified 7' 2" 7' 6" 460 28on your order, two 1606 strikes will be added per mullion. 8' 2" 8' 6" 496 33Each 1606 strike is $57 list. 10' 2" 10' 6" 575 41

4754 Prepped for two 4263 Monitor Strikes 7' 2" 7' 6" 636 308' 2" 8' 6" 672 3510' 2" 10' 6" 746 43

4854 Prepped for one 299 strike and one 6111 Electric Strike. 7' 2" 7' 6" 636 30Advise Handing of Electric Strike Prep. 8' 2" 8' 6" 672 35

10' 2" 10' 6" 746 43 4954 Prepped for two 299 Strikes 7' 2" 7' 6" 460 28

8' 2" 8' 6" 496 3310' 2" 10' 6" 575 41

4954-XP Prepped for two 909 Strikes, for the XP device. 7' 2" 7' 6" 460 288' 2" 8' 6" 496 3310' 2" 10' 6" 575 41

* 9854 Prepped for one 499F and one 6111 Electric Strike or 7' 3" 7' 5" 886 32one 268 Strike and one 6111 Electric Strike. 8' 3" 8' 5" 924 40Advise handing of Electric Strike Prep. 10' 3" 10' 5" 999 48

9954 Prepped for two 499F or 268 Strikes 7' 3" 7' 5" 712 338' 3" 8' 5" 749 3810' 3" 10' 5" 824 46

9954-XP Prepped for two 954 Strikes, for the XP device. 7' 3" 7' 5" 712 338' 3" 8' 5" 749 3810' 3" 10' 5" 824 46

* When used with 22, 98 or 99 Series Rim Devices and 499F strikes are not ordered with devices, two 499F strikes per 9954 and one per 9854 will be added. Each 499F strike is $140 list.

Aluminum MullionsFurnished with Stabilizers and Weatherstripping

US4, US10

Model No. DescriptionFor Openings

Up To:US28

313 315Weight

lbs. 5654 Prepped for two 299 Strikes 7' 2" 1065 1280 17

8' 2" 1139 1353 20 10' 2" 1353 1599 25

5654-XP Prepped for two 909 Strikes, for the XP device. 7' 2" 1065 1280 17 8' 2" 1139 1353 20 10' 2" 1353 1599 25

5754 Prepped for a 1408 Double Strike 7' 2" 1277 1491 17 Price includes strike. 8' 2" 1345 1563 20 Note: If 5754 is ordered w/device - Specify device L/strike 10' 2" 1491 1568 25

REFERENCE NOTES:Mullions are furnished standard for 7'0 doors when door height is not specified.

Blank Mullions (without strike preparation) are available at the same price as standard Mullions.

The 9854 and 9954 are U.L. Fire approved for heights up to 8'0" with 22-F and 88-F Rim Device. For door heights over 8'0" mullion is furnished less U.L. label. The 9854 and 9954 are U.L. Fire approved for heights up to 10'0" with 98/99-F Rim Device. For door heights over 10'0" mullion is furnished less U.L. label.

Special Centerline (other than 39 11/16"): Steel Mullion, $76 list add. Aluminum Mullion, $349 list add.

ADA centerline height of 37" is available at no additional charge, must be specified.For special length mullions see page 17 for pricing.



Mullions (Continued)

Rod and Latch GuardFor use with all Von Duprin Surface Vertical rod devices.Specify Handing.

Steel Mullion Options and Accessories SP28Model No. Description SP313KR Keyed Removable option - Prefix Mullion model with "KR"

KR1654/4954 List Add to Mullion price 384KR98/9954/4754/4854 List Add to Mullion price 423

KR54 Keyed Removable Kit for 1654 and 4954 Mullions 384KR54-F Keyed Removable Kit for 98/9954/4754/4854 Mullion 423MT54 Wall Mounted Storage Kit "specify part number 050581" 122154 Mullion Stabilizers (set of four, 2 attaches to the mullion and 2 to the door) 75

Model No. Description Part Number US32DRG-27 Rod and Latch Guard 050061 (RHR), 050062 (LHR) 359RG-27-3 Rod and Latch Guard Extended 3' Door 050261 (RHR), 050262 (LHR) 747RG-27-4 Rod And Latch Guard Extended 4' Door 050263 (RHR), 050264 (LHR) 966RGO Rod Guard Only 050066 (NON-HANDED) 226LGO Latch Guard Only 050067 (RHR), 050068 (LHR) 132LGO-3 Latch Guard Only Extended 3' Door 050265 (RHR), 050266 (LHR) 533LGO-4 Latch Guard Only Extended 4' Door 050267 (RHR), 050268 (LHR) 747

Aluminum Mullion Accessories Part NumberAll

FinishesMullion Angle Bracket - For Narrow Transom Bars 050092 44

75



Price includes 304L Strike. Cylinders are not included.Can not be used on doors requiring panic or fire exit hardware.

UL Listing:�Ild"VcY�I]gZZ"ed^ci�AdX`h�VcY�AViX]Zh��[dg�;^gZ�9ddgh��Ã�JA�&%�8#� Rating: 3HR Pairs (Double Egress), 90 Min. Pairs (Swing Same Direction), Door Size: 8’0 x 8’0 Pairs (Hollow Metal only) Windstorm Rating: UL–FEMA 320 and 361 certified: 4’0 x 8’0 Single Doors (Non-fire-rated) Hollow Metal, 8’0 x 8’0 Pairs Hollow Metal. UL –ANSI/ICC 500 certified for F5 Tornado applications. These products are listed with Steelcraft PW14 Series door for Tornado Listings.

237 Two Point Latch

• Windstorm-rated 237 outswing only

• If cylinder is required on push side, add suffix “C” to model #. (e.g. 237EO-C)

• Cylinder (mortise 3215) not included in pricing.

• The #06 Lever is furnished standard.

• Optional lever designs, #03 and #17 are available at no additional charge

• Windstorm-rated 237 outswing only

• If cylinder is required on pull side, add suffix “C” to model #. (e.g. 237EO-C)

• Cylinder (mortise 3215) not included in pricing.

• The #06 Lever is furnished standard.

• Optional lever designs, #03 and #17 are available at no additional charge.

How to order: 237 EO RHR 06 26D

Model EO / L / L-BE / L-NL

Handing LHR / RHR / LH / RH

Lever Style 03 / 06 / 17

Finish US3 / US4 / US10 / US10B / US26 / US26D

Outswing Door (RHR and LHR) US10B US3Function Model No. Push Pull US26D US10 US4 US26Exit Only 237EO 237 BE None 2120 2120 2035 2168Class room 237L 237 BE 378 w/cyl 2684 2714 2521 2779Passage 237L-BE 237 BE 378 BE 2656 2690 2489 2747Storeroom 237L-NL 237 BE 378 NL 2684 2714 2521 2779

Inswing Door (RH and LH) US10B US3Function Model No. Push Pull US26D US10 US4 US26Exit Only 237EO None 237 BE 2120 2120 2035 2168Class room 237L 378 w/cyl 237 BE 2684 2714 2521 2779Passage 237L-BE 378 BE 237 BE 2656 2690 2489 2747Storeroom 237L-NL 378-NL 237 BE 2684 2714 2521 2779



Extension Rods

Extension Rod KitsFor non-standard door heights

One Piece Top Rod KitsFor 8', 10' and 12' door heights

Fire rated devices over 8’ may be provided less UL label based on the door application.Caution: Other special door and frame conditions may require additional charges. Consult factory

Fire rated devices over 8’ may be provided less UL label based on the door application.Caution: Other special door and frame conditions may require additional charges. Consult factory.

Device TypeLength/

Door HeightList Price

All Finishes 2227/2227-F 12" 22 2227 36" 26 3327A/9927/9927/9957-F 12" 22 3527A/9827/9827/9957-F 12" 22 3327A/9927/9957 36" 26 3527A/9827/9857 36" 26 3347A/3547A/9847/9947 8' 4"-10' 0" 22 9447/9547 8' 3" - 9' 11" 22 5547 8' 0"-10' 0" 22 5547WDC/5547WDC-F 8' 0"-10' 0" 22 5547-F/8847-F 8' 0"-10' 0" 22 8827/8827-F 12" 22 8827 24" 22

Device TypeLength/

Door Height Unfinished US26D 313 US10 US4US3

US26 315 SPBLK 3327A/3527A 60" Ã 207 207 240 235 251 251 Ã 9827/9927/9857/9957 60" Ã 108 108 199 132 209 209 Ã * 3347A/3547A/9847/9947 10' - 13' 4" 74 Ã Ã Ã Ã Ã Ã Ã * 3347A/3547A/9847/9947 13' 4" - 15' 84 Ã Ã Ã Ã Ã Ã Ã** 5547 10' - 16' 73 Ã Ã Ã Ã Ã Ã Ã** 5547WDC 10' - 16' 162 Ã Ã Ã Ã Ã Ã Ã** 5547F/8847F 10' - 16' 155 Ã Ã Ã Ã Ã Ã Ã 8827 36" Ã 68 105 77 65 235 Ã 235 8827 48" Ã 80 116 93 77 247 Ã 247

* Available size ranges, 10' - 11' 8", 11' 8" - 13' 4" and 13' 4" - 15'** Available size ranges, 10' - 12', 12' - 14' and 14' - 16'

Device TypeLength/

Door Height US26D 313 US10 US4US3

US26 315 SPBLK33A/35A/98/9927/9857/9957 8' 179 179 114 90 179 179 Ã33A/35A/98/9927/9857/9957 10' 198 198 124 110 193 193 Ã33A/35A/98/9927/9857/9957 12' 209 209 138 129 217 217 Ã8827/8827-F 8' 103 147 160 160 319 Ã 319

77



Security Screws are pin-in-socket type and require special hex wrenches

Security Screw Packages

All Finishes

Wrench Model# Required

Devices 222/22-F Rim 12.00 22227/2227-F 40.00 233A/35A Rim 20.00 233A/3527A 55.00 233/3547A/47A-F 31.00 288/88-F Rim/8875/75-F 35.00 28827 54.00 28827-F 79.00 28847-F 41.00 298/99/99-F/98-F Rim/98/9975/75-F 41.00 298/9927/27-F 49.00 298/9947/47-F and WDC 39.00 2

Trims and Controls230/880/990 11.00 2230/990x330/350 35.00 2386/360L-DTx330/350 15.00 2371/373 23.00 2374/376/377 11.00 2696/697 10.00 2696/697x330/350 20.00 2

Mechanical Strikes1439/1606/248L-4/264/266/299/299F 11.00 21408 19.00 2268 16.00 2338 9.00 2385A 7.00 2499F 32.00 2575/576 10.00 2

Other Mechanical Products330/350 Pushbar 20.00 21654/4954 Mullion 30.00 25654/5754 Mullion 14.00 29954 Mullion 67.00 2, 4154 Mullion Stabilizer 24.00 27500 Lock 10.00 2

Electrical Products 4263/4570/4582/4690 Monitor Strike 10.00 24570/4690 Monitor Strike 10.00 24670 Monitor Strike 10.00 26211-16/6222-26 Electric Strike 9.00 2EPT 49.00 2

Wrenches (One set of required wrenches charged per order unless specified otherwise)

Model No. Description Part Number List Each#1 1/8" Hex - #6 Screw 010060 14.50#2 5/32" Hex - #8-1/4 Screw 010059 14.50#3 7/32" Hex - 3/8 Screw 010061 14.50#4 3/16" Hex - 5/16 Screw 010062 14.50



For use with devices on doors with special high density blocking material.Blocking material must be UL or Warnock Hersey approved.

5100 Series Electric Strike

SLM Blocking Mounting Packages

Model No. Thread SizeList

Price425 10-24 Package of 2 18.00625 12-24 Package of 2 18.00325 1/4-20 Package of 2 18.00525 12-24 Package of 2 18.00825 10-24 Package of 2 18.00

REFERENCE NOTES:625 and 825 sexbolts furnished standard for 1 3/4" thick door. Specify 2 1/4" if required.

5100 Series BHMA


689 695 622

5100-3FP Medium Duty Electric Strike 192Three Faceplates included: Square Corner standard ANSI, 4-7/8" Round Corner standard ANSI, 4-7/8" Long round corner, 7-15/16"

REFERENCE NOTES:5100 Strike ships standard FSE 24VDC. Strike can be field converted to FS or 12VDC options.For AC current use SO-12 or SO-24 Rectifier Kit, $33 list add.

Type Unfinished

US3, US4, US10B

US32D, US3299 Rim 16.00 Ã9927 22.00 Ã9975/9947 10.00 Ã88 Rim Ã 26.008827 Ã 45.008875 Ã 26.005547WDC Ã 32.00RG-27 22.00 ÃRGO 10.00 ÃLGO 10.00 Ã

Machine screws are supplied with the Device.

Sex Bolts

79



Model No. US32DUS10

US10B US4 US3 US32Weight

lbs. 6111 (Specify when using with a 55 rim device.) 666 697 675 796 721 2.0 6112 (Specify when using with a 55 rim device.) 624 662 624 764 640 2.4 6113 (Specify when using with a 55 rim device.) 666 679 666 786 679 2.0 6114 (Specify when using with a 55 rim device.) 645 708 679 750 655 2.5 6121 (Specify when using with a 55 rim device.) 929 1,016 929 1,187 1,005 4.11 6210 608 665 608 747 690 1.9 6211 573 608 578 676 580 1.8 6211AL 594 644 594 714 601 1.7 6211WF 578 608 578 676 580 1.9 6212 679 718 679 759 725 1.9 6212WF 679 718 679 759 725 2.0 6213 653 683 653 764 683 2.2 6214 746 765 736 764 758 2.1 6215 667 708 668 765 679 1.15 6216 849 889 849 1,057 858 2.10 6221 750 789 750 831 806 1.12 6222 948 986 948 1,163 948 2.0 6223 638 683 638 764 683 2.2 6224 755 775 747 892 768 2.1 6224AL 765 810 765 921 775 1.15 6225 895 929 895 1,007 948 1.13 6226 638 675 638 764 646 1.15 * 6300 574 Ã Ã Ã Ã Ã

* 6300 Strikes are furnished standard Fail-Secure (FSE Only), Field selectable 12 - 24VDC provided standard. Compatible with Von Duprin and Falcon Rim Devices. Non-Handed for left or right swinging doors. UL1034 Burglary Resistant, UL10C listed for 3 hour fire doors.

REFERENCE NOTES:Electric Strikes are furnished standard Fail-Secure (FSE). 24VDC is supplied standard if not specified. If using a Transformer with “AC” output, specify electric strike with “AC” current (example: 6111 24VAC), $33 list add each per electric strike. See Electric Strike catalog for lock compatibility and required accessory equipment. Electric Strikes are furnished standard in US32D when finish is not specified.Von Duprin cannot guarantee compatibility with other manufacturer products as designs may change without notice.

6100/6200 Series Options and Accessories:

Suffix DescriptionAdd to

List Price FS Fail Safe 32 DS Dual Signal Switch not avail for 6221, 6222, 6225 151 DS-LC Low Current Dual Signal Switch (.05 amps or less) at 24VDC 151 * AC SO-12 / SO-24 Rectifier Kit - order part number 010057 / 010058 33 16VDC 16 Volt Solenoids sold separately - order part number 050239 88 EB Entry Buzzer (use with FSE only) - order part number 050242 specify finish. 33 Shim Shim for 6111/6113 Blade Stop Applications - 010055 specify finish. 128

9100 Filler Bracket Kit - order part number 050749 41

* For 16VAC Current, use SO-24 Rectifier Kit

6300 Series Accessories: Shim Shim for 6300 Blade Stop Applications - order part number 050804-00 48 6300 Cable Kit - order part number 050803-00 38

6000 Series Electric Strike



Schlage® Electronic Exit TrimAD Series Electronic Exit Trim is available on Series 98 and 99 for rim, mortise, surface vertical, and concealed vertical rod, and Series 22 for rim and surface vertical rod devices. AD-300/400 network trim is available exclusively with Series 98 and 99 devices when mounted with LC-RX switch provided with trim.

Four communication options:� Ã�69"'%%�..(�D[[a^cZ!�VXXZhh�g^\]ih�hidgZY�dc�adX`#� Ã�69"'*%�..(�D[[a^cZ!�VXXZhh�g^\]ih�dc�hidgZY�bV\cZi^X�higêZ�XgZYZci^Va#�� Ã�69"(%%�..(�CZildg`ZY�=VgYl^gZ�AdX`h� Ã�69")%%�..(�CZildg`ZY�L^gZaZhh�AdX`h

For complete pricing information refer to Schlage Electronic Security Price Book 23 #ES-2056.

NOTE: CVR trim is available only on metal doors.

Model No. US26D US10BUS4

US10US3

US26Weight

lbs.4263-T1 For Rim type exit device as per catalog 308 308 295 326 2.14263-T3 For Rim type exit device as per catalog 308 308 295 326 2.14268-T1 For Rim type exit device as per catalog 404 404 404 426 24582-T1 For Mortise Locks as per catalog - specify handing 338 338 308 356 24582-T2 For Mortise Locks as per catalog - specify handing 338 338 308 356 24570-T1 For Cylindrical/Mortise Locks as per catalog 338 338 308 356 24670-T1 For Cylindrical Locks as per catalog 308 308 295 326 24690-T2 For Single 3347A, 3547A, 9847, and 9947 491 491 445 511 2.14690-T2-1 Special Twin for 3347A and 3547A Device (2 1/4" cc) 909 909 830 909 2

Electric Power TransfersModel No. SP28 SP313

Weight lbs.

EPT 2 Two 18 gauge wires 422 422 2.5EPT 10 Ten 24 gauge wires 447 447 2.5BAA "Buy America Act" compliant EPT option N/C

will be labeled as "Assembled in the U.S.A. with U.S. and foreign materials"

Monitor Strikes

81



1. Select Power SupplyModel Description List PricePS902 Base Power Supply (2A @ 12/24 VDC field selectable) (approx. weight 9 lbs)

PS902 is able to accept a total of 1 optional distribution board and 1 900-FA board189

PS914 Base Power Supply (4A (16A inrush) @ 12/24 VDC field selectable) (approx. weight 9 lbs) PS914 is able to accept a total of 2 optional distribution boards and 2 900-FA boards

545

PS914RFK The PS914RFK allows the retrofit of the PS914 into an existing PS873 cabinet. 639BAA " Buy America Act" compliant power supply option

will be labeled as "Assembled in the U.S.A. with U.S. and foreign materials"30

When specifying power supply with "EL" or "QEL" Electric Latch Retraction devices, the 2RS is furnished when board option is not specified.

2. Select Optional Distribution Board with or without FA (Fire Alarm Relay)Model Description Part # List Price900-4R Independently controlled relays 44489912-00 129900-4R-FA Independently controlled relays with FA 175900-2RS 2 Relay board output 44489896-00 134900-2RS-FA 2 Relay board output with FA 180* For field installation, use model number. Example: 900-2RS.

900-4RL 4 Relay board integrated logic for controlling security interlocks, auto operators and time delays

44489920-00 353

900-4RL-FA 4 Relay board integrated logic for controlling security interlocks, auto operators and time delays with FA

399

900-8F 8 fuse protected outputs 44489946-00 46900-8F-FA 8 fuse protected outputs with FA 92900-8P 8 PTC protected outputs 44489938-00 46900-8P-FA 8 PTC protected outputs with FA 92900-BBK Battery Backup Kit (includes two 7A/hr batteries) 44489961-00 184900-BB Battery Backup Board Only 44489953-00 92900-BAT Batteries Only (qty 2) 44487155-00 92

3. Select Other Power Supply OptionsModel Description Part # List Price900-FA Fire Alarm Relay (EIR) module is a plug-in relay to provide an interface

with fire or other emergency override systems44487247-00 46

PS902: may be installed directly on power supply or may be used with optional distribution boards PS914: must be used with optional distribution boards. If an optional board is not listed the 900-8F-FA will be provided.

900-KL Key Lock Cover (not available with BAA) 44486850-00 30Note: PS902 and PS914 power supplies require connection to AC line voltage. Installation and all electrical connections

(high and low voltage) should be performed by a qualified electrical contractor.

Standard Features • UL294 Listed for Access Control • Class 2 rated power limited output • Universal 110-220 VAC Input • Regulated and filtered DC outputs • AC input, battery and DC output LED indicators

• 1 connector for optional distribution boards• AC input status indication on outside cover• AC monitoring• 12" H x 14" W x 4" D enclosure

Power Supplies



Model No. Description List Price* DE5101 Logic Controller 15 Second Delay furnished standard. Order part number 050377 780* OVER 15 SECOND DELAY REQUIRES A LETTER OF APPROVAL FROM AUTHORITY HAVING LOCAL JURISDICTION.

FAX LETTER IN WITH SALES ORDER. ORDER CANNOT BE PROCESSED WITHOUT THE LETTER.

� 0 Delay 0 Second Delay 107 � 30 Delay 30 Second Delay 107 � BOCA-15 Delay 15 second delay with BOCA Modification 107 � BOCA-30 Delay 30 second delay with BOCA Modification 107 � Consult factory for lead time.

Interface Boxes/RelaysModel No. List PriceJB7 Enclosure with terminal strip. Order part number EBOX.101

Optional relays are available for factory or field installation506

Factory InstalledList add per

Interface BoxR1 24VDC SPDT 220 R2 24VDC DPDT 220R3 24VDC Delay on Make Time Delay 362 R4 24VDC Delay on Break Time Delay 362Field Installed Each PriceR5 24VDC SPDT. Order part number RELAY.101 220 R6 24VDC DPDT. Order part number RELAY.102 220R7 24VDC DPDT. Order part number RELAY.103 362 R8 24VDC DPDT. Order part number RELAY.104 362

SwitchesModel No. Part No.

List PriceNon-Finished

RX Switch Kit 050251 191RX-LC Switch Kit 050281 222RX-2 Switch Kit 050270 238RX-Aux Switch Kit 050271 199

LX Switch Kit 3' Device 050254 191LX Switch Kit 4' Device 050255 191LX-LC Switch Kit 3' Device 050283 222LX-LC Switch Kit 4' Device 050285 222EL-LX Switch Kit 050247 191EL-LX-LC Switch Kit 050287 222

LX-RX Switch Kit 3' Device 050256 290LX-RX Switch Kit 4' Device 050257 290LX-RX-LC Switch Kit 3' Device 050289 346LX-RX-LC Switch Kit 4' Device 050291 346EL-LX-RX Switch Kit 050259 290EL-LX-RX-LC Switch Kit 050293 346

LX 94/95 Switch Kit (After 4/2005) 050266 191

Designed to meet NFPA 101 "Special Locking Arrangement" applicationsNote: A complete system requires several components not included with controller. Consult catalog for details.

Delayed Exit System


Von Duprin Parts Prices

84



Index

Numerical Index032114 118033022 102033024 132050001 115, 119050002 115, 119

050003 115, 119050004 97, 101050005 97, 101050006 115, 119050007 115, 119

050008 115, 119050009 115, 119050010 115, 119050011 125050012 115, 119

050013 115, 119050014 95, 107050015 125050016 125050017 115, 119

050018 125050019 100050020 105050021 105050022 105

050023 105050024 105050025 105050026 105050027 105

050028 105050029 105050030 105050031 125050032 125

050033 125050034 125050036 98050038 133050039 133

050040 133050041 133050042 133050046 124050047 92, 109

050048 92, 109050053 98050071 105050072 105050073 105

050083 133050084 133050088 110050090 89, 109, 132050091 89, 109, 132

050093 104050096 98050099 120050101 99050102 99

050103 99050104 99050105 96050106 99050107 99

050108 99050109 90, 95050110 98050112 97050114 90, 106

050115 90, 106050117 90, 106050122 132050124 132050128 92, 109

050130 122050132 90, 106050133 90, 95050134 106050135 122

050136 97050137 97050139 97050140 95, 117, 120050141 95, 117, 120

050142 95, 121050143 95, 121050148 117050156 116, 120050168 122

050169 122050171 92, 109050183 96050184 96050185 96

050186 96050187 96050188 96050189 96050190 122

050191 96050192 96050193 96050194 96050195 96

050196 97050197 97050198 97050199 97050200 99

050201 99050202 99050209 101050210 101050211 101

050212 114050213 114050214 114050215 114050218 132

050228 108, 129050237 125050239 125050240 125050241 122

050260 100050273 100050274 100050275 100050276 100

050277 103050278 98, 103050279 103050327 103050328 103

050330 122050331 100, 101050332 96050333 96, 97050334 96

050335 122050352 96050353 96050354 96050355 96

050356 96050357 96050358 97050359 97050360 97

050362 97050363 97050364 97050366 97

050367 98050368 98050369 98050370 98050371 122

050372 98050373 98050374 98050375 108, 129050376 108, 129

050379 131050381 122050383 122050386 105050387 105

050388 105050389 105050390 122050391 122050392 122

050393 100050394 133050395 133050396 133050397 132050400 89, 92, 109

Numerical Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84-8722 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88-8933A/35A Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90-9333A/3549A Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94330/350 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9555 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96-9888 Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99-10498/99 Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105-11098/9949 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111XP98/99 Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112INPACT Device Series 94/95. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 7500 Mortise Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114Controls Series 360/370 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115-116Trims . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117-121Mullions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122Screw Packages/Shims/Miscellaneous. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123Maintenance Kit and Replacement Packages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124Electric Strikes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125-128Electrical Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129-131GUARD-X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Service Replacement Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132-133Part Number Cross Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134-135

Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page Part No. Page

85



Numerical Index050401 89, 92, 109050402 89, 92, 109050403 90050404 90050405 90

050406 90050407 90050409 99050410 99050411 99

050412 99050413 99050414 99050415 99050416 99

050417 99050418 99050419 99050420 99050421 99

050422 99050423 99050424 99050425 99050426 99

050427 99050428 99050429 99050430 99050431 99

050432 99050433 99050434 99050435 102050436 102

050437 102050438 102050439 102050440 102050441 102

050442 102050443 102050444 102050445 102050446 101

050447 99050448 101050449 101050451 102050452 102

050453 104050454 104050455 104050456 104050457 98, 104

050458 98, 104050459 97, 101050460 103050461 103050462 103

050463 103050464 103050465 103050466 103050467 103

050468 103050469 103050471 103050472 103050473 103

050474 90050475 90050476 102050477 102050478 103

050479 103050480 103050481 103050482 104050483 90

050484 90050485 90050486 91050487 91050488 91

050489 91050490 91, 107050491 91, 108050492 92, 109, 113050493 92, 109, 113

050494 92, 109050495 92, 109050496 92050497 100050498 100

050499 100050500 100050501 100050502 100050503 100

050504 100050505 100050506 100050508 100050509 92, 109

050512 93, 110050513 93, 110050514 93, 110050515 93, 110050516 92, 109

050519 93050520 93050522 92, 109050523 92, 109050524 95, 107

050525 91, 107, 131050526 91, 107, 116, 117, 122050529 88, 90, 105050530 91050531 91, 108, 129

050532 91, 108, 129050533 108, 129050534 91, 108, 129050535 91, 108, 129050536 91, 108, 129

050537 91, 108, 129050538 91, 108, 129050539 91, 108, 129050540 91, 108, 114, 129050541 92, 108, 129

050542 92, 108, 129050543 92, 108, 129050544 92, 108, 130050545 92, 108, 130050546 89, 92, 109

050547 89, 110050548 105050549 105050550 105050551 105

050552 105050553 105050554 105050555 105050556 105

050557 105050558 105050559 105050560 105050562 105

050563 105050564 105050565 105050566 89, 109050569 106

050570 106050572 106050573 106050574 110050575 110

050576 116050579 116050580 122050581 122050582 110

050583 110050584 117050585 113050587 116050588 106

050589 106050592 116050593 116050595 116050596 116

050597 116050598 116050599 116050600 116050601 116

050602 116050603 116050604 116050605 116050606 116

050607 116050608 116050609 116050611 116, 121050612 116

050613 116, 118050614 116, 118050615 116050616 116050619 116

050621 116050622 93, 110050623 93, 110050624 93, 110050631 98

050632 98050633 98050634 98, 104050635 98, 104050636 98, 104

050639 98050640 98050641 98050642 110050643 93

050644 110050645 93050650 93, 110050651 93, 110050652 93, 110

050653 93, 110050654 93, 110050655 93, 110050656 98050660 104

050661 104050662 104050663 104050671 121, 130050672 121, 130

050673 121, 130050675 112050676 112050689 112050690 112

050691 112050699 125050701 129050702 129050732 119

050733 119050734 119050735 119050736 119050737 119

050738 119050739 119050740 119050741 119050742 119

050743 130050744 130050749 128050750 115050751 115

050752 115050753 115050754 115050755 115050756 115

050757 115050758 115050759 115050760 115050761 115

050762 115050763 115050764 115050765 115050766 106

050767 106050768 106050769 106050770 106050771 106

050772 106050773 106050796 129050803 128050804 128

050809 129050814 121050939 128050940 128050941 128

050942 128050943 128051701 104051703 104051704 98

051705 98, 104051707 98051801 93, 110051802 110051803 89

051804 89051807 93051808 93, 110, 113051809 93, 110051810 110

051811 93051883 105051884 105051914 11551915 119

051916 115051917 120051918 115051919 120051920 115

051921 119051922 115051923 119051924 116051925 120

051926 116051927 120051928 115051929 119051930 115

051931 119051932 116051933 120051934 116051935 120

051936 115051937 119051938 115051939 119090001 100

090002 100090003 102090004 102090005 88, 91, 97, 102, 108090006 102

090007 102090008 97, 102090009 100090010 104090011 98, 104

090012 101090013 101090014 101090015 100090016 101

090017 100090018 98, 104090020 97, 102090021 97, 102090022 96

090023 96090024 96, 97090025 96090026 96, 97090027 97

090028 97090029 97090030 98090031 90, 105, 124090032 98

090033 98090034 98090035 98090036 90, 131090037 91, 108

090038 89, 91, 108090039 89, 91, 108090040 89, 90, 91, 108090041 89, 91, 108090042 89, 91, 108

090043 89, 91, 108090044 89, 91, 108090045 91, 107090046 91, 107090047 95

090048 89, 95, 108090049 90, 95, 107, 124090050 96090051 96, 97090052 97

090053 97090054 89, 93, 110090055 89, 92, 109090056 89, 92, 109, 124090057 89, 92, 109

090059 93, 109, 124090060 132090061 93, 109090062 132090063 93, 109

090064 93, 109090065 89, 93, 109, 124090066 93, 109090067 89, 93, 110090068 89, 93, 110

090069 93, 110090070 93, 110090071 93, 110090072 93, 110090073 91, 107, 124

090074 88, 105, 124090075 89, 110090076 89, 92, 109, 124090077 88090079 88, 105

090080 102090081 97, 102090082 102090083 102090084 132

090085 88, 91, 97, 102, 107, 108090088 108090090 116090091 116090092 116

090093 116090094 116090095 116090096 116090097 116

090098 116090099 116090100 116090101 116090102 116


86



Numerical Index090103 116, 117, 120090104 117090105 117090106 117090107 88, 90, 105, 113, 124

090108 123090109 123091030 132091031 132091032 132

091061 132091080 132091082 132091091 123100315 98

100316 98100741 98, 104101030 131101212 118103865 102

103866 97105100 131105140 104105144 98105952 93

105987 122105988 122106222 93, 110, 113107765 103107813 91, 107

108490 132108493 132108705 118109012 88109111 116

109112 115109113 132109115 115109118 132109126 115

109127 115109132 115109133 115109324 93, 109, 113109347 114

109361 89109362 89109366 115109367 115109369 121

109773 114109871 117109872 117109873 117109879 117

109915 88110360 130110388 91, 108, 129110537 120110544 118

110547 118110744 114110768 120110769 120111244 125

111246 125111247 125111250 125111251 125111264 125

111711 125111712 125111713 125111714 125111715 125

111716 125111717 125111718 125111719 125111720 125

111721 125111722 125111723 125111724 125111725 125

111726 125111727 125111728 125111729 125111730 125

111731 125111732 125111733 125111734 125111735 125

111736 125111737 125111738 125111739 126111740 126

111741 126111742 126111743 126111744 126111745 126

111746 126111747 126111748 126111749 126111750 126

111751 126111752 126111753 126111754 126111755 126

111756 126111757 126111758 126111759 126111760 126

111761 126111762 126111763 126111764 126111765 126

111766 126111813 126111814 126111869 120111943 114

112018 108, 129112063 89, 110112409 105112455 105112456 105

112462 120112754 126112755 126112756 126112757 126

112758 126112759 126112760 126112761 126112762 126

112763 126112764 126112765 126112766 126112767 126

112768 126112769 126112770 126112771 126112772 127

112773 127112774 127112775 127112776 127112777 127

112778 127112779 127112780 127112781 127112782 127

112783 127112784 127112785 127112843 115112868 93, 109

113098 105113099 105, 106113100 105113232 127113781 108, 129

113782 108, 129113853 100114141 98, 103114294 114114810 115

114811 119114812 115114813 119114814 115114815 119

114816 115114817 119114818 115114819 119114820 115

114821 120114822 115114823 119114824 115114825 119

114826 115114827 119114828 115114829 119114830 116

114831 120114832 116114833 120114834 116114835 120

114836 116114837 120114838 116114839 120114840 116

114841 120114842 115114843 120114844 115114845 120

114846 115114847 120114848 115114849 120114850 116

114851 120114852 116114853 120661481 123900252 123

900253 123900254 123900263 123900281 123900284 123

900285 123900288 127900289 123900290 127900291 127

900292 127900344 127900345 127900347 127900400 122

900402 122900409 122900410 122900411 122900413 122

900501 103900502 98, 103900503 100, 101, 102900504 100, 101, 102900505 100, 101, 102

900506 100, 101, 102900507 96, 97900508 96900509 97900512 96,97

900514 96, 97900531 118900532 114, 123900533 118900534 104

900539 96900541 98, 104900542 118900558 115900559 115

900561 88, 107900563 88, 107900564 132900565 93900568 88, 107

900569 132900576 98, 103900582 115900583 132900584 127

900589 89, 92, 109900597 107900610 100900613 100900614 98, 103

900615 101900619 90, 91900620 93, 110900624 117900760 118

900761 118900771 118900772 118900776 118900782 118

900783 118900784 118900807 116900808 116900809 116

900810 116, 123900835 95900836 95900839 121900840 121

900847 123900848 123900849 123900850 89, 92, 103, 109900852 103

900853 120900856 90, 91, 109900870 127900881 127900882 127

900883 116900884 116900885 127900888 123900892 90, 106

900894 117900898 110900901 132900919 89, 110900920 120

900954 120900966 127900978 131900980 92, 109900981 88

945521 123952820 118953671 121956760 118, 120959055 118

959056 118959560 118959563 118959575 118, 120, 121959603 118, 120, 121

959953 123960003 118960060 118960109 118960316 118

960317 118960676 118960689 118960902 118, 121960921 121

961047 122961084 123961180 118961267 119, 120, 121961280 118

961530 123963011 119963074 123963080 114963105 120

963150 132963196 119963579 119, 120963581 118963584 132

963585 132963703 119, 121963704 119, 121963712 132963767 120

963873 132963902 132963905 132963909 132963954 114

963984 114964013 89964019 127964035 114964037 127

964070 127964097 120964183 120964190 127964285 120

964330 114964334 117964353 120964355 121964375 132

964390 114965130 121965226 119, 120965237 119, 120965310 118

965312 118965317 118965568 119965712 122965713 122

965714 122966268 88966671 123966985 118967269 123

967291 118967329 121967333 123967704 131968112 132

968116 132968144 107968146 107968201 117, 120968592 88

968595 88968596 88968598 88968601 88968603 88

968645 122968668 114968694 121968713 127968716 127


87



Numerical Index968748 114968761 114968763 114968765 114968766 114

968770 114968773 114968883 119968888 88968918 121

968935 114968939 114969012 120969089 114969091 121

969092 121969107 114969122 131969126 88969127 88

969140 117969157 117969280 123969349 131969350 131

969352 117969353 119, 120969354 131969364 114969545 120

969584 127969610 114969889 132969903 117969904 117

969906 117969908 117969909 117969910 117970035 88

970036 88970117 120970137 119970138 119970139 119

970159 119, 121970188 114970191 107970192 107970271 127

970272 127970274 127970276 127970278 127970280 127

970300 127970301 127970302 127970303 127970305 127

970306 127970310 127970318 114970321 123970323 123

970384 128970387 128970388 128970407 128970412 128

970415 128970488 119, 121970491 121970513 108, 129970519 108, 129

970546 114970594 131970735 114970861 114970862 114

970872 114970978 93, 110970979 117971010 133971012 121

971015 121971187 122971198 128971212 122971245 117

971249 117971257 117971259 117971312 122971313 122

971316 122971320 114971328 122971340 122971385 128

971415 128971417 128971440 121971470 88971471 88

971497 117971556 131971557 131971573 121971585 121

971592 88971593 118971614 132971655 113971656 113

971659 113971664 113971706 113971709 113971710 113

971712 113971763 113971764 113971765 113971766 113

971822 114972466 118, 120, 121972467 118, 120, 121972469 121972549 114

990132 128990637 131BRKT.121 131CABLE.10038 121, 130CASE.107 88, 113

COVER.109 131COVER.114 131COVER.115 131COVER.116 131COVER.121 131

COVER.122 131ECAP.105 131ECAP.115 113KIT.1001 113KIT.1002 113

PBKIT.1001 88PBKIT.1002 88PBKIT.1003 88PBKIT.1004 88PCB.10018 131

PCB.10019 131PCB.10020 131PIPE.101 131PKGMTG.1001 113PKGMTG.1002 131

PKGMTG.1003 131PKGMTG.1004 125PKGMTG.1005 125PKGSCR.1001 131PKGSCR.1003 125

PKGSCR.1004 125PKGSRV.1007 124PKGSRV.1010 124PKGSRV.1011 124PKGSRV.1012 124

PKGSRV.1013 124PKGSRV.1015 124PKGSRV.1016 124PKGSRV.1018 98, 124PKGSRV.1019 124

PKGSRV.1020 124PKGSRV.1022 124PKGSRV.1023 124PKGSRV.1024 124RODASY.121 113

RODASY.122 113SIGN.1001 131SIGN.1002 131SIGN.1003 131

Part No. Page Part No. Page Part No. Page

88



22 Series

List Price

Description Part. No.Non-

FinishedSP28, SP313

Center Case 22 Rim Center Case Less Cover 109012 227.00 Ã 22-F Center Case Less Cover 109915 227.00 Ã 2227/27-F Center Case Less Cover CASE.107 182.00 Ã

22/22-F Center Case Cover 968603 Ã 42.00 2227/27-F Center Case Cover 968888 Ã 42.00 22 Center Case Cover Screw Pkg/4 090077 7.50 Ã

22/22-F Rim Mtg. Package - 1 3/4" -2 1/4" Dr 900561 9.50 Ã 2227/27-F Mtg. Package - 1 3/4" Dr 900563 9.50 Ã 2227/27-F Mtg. Package - 2 1/4" Dr 900568 9.50 Ã

Control Link Pin Kit (with Retaining Ring) 050529 9.50 Ã Control Link Pin Ret. Ring Pkg/10 090107 9.50 Ã NL Drive Screw Pkg/10 090074 14.00 Ã 2227 Latchbolt Pin Pkg/10 090079 9.50 Ã 22/2227 Pushbar Stop 971592 9.50 Ã

Mechanism Case 22 End Cap Kit 900981 40.00 Ã 22 Mechanism Case End Cap 968601 14.00 Ã 22 Push Bar End Cap 968598 9.50 Ã

22/2227 Cover Plate - 3' Dr 968595 Ã 40.00 22/2227 Cover Plate - 4' Dr 968596 Ã 40.00 22-F/2227-F Cover Plate - 4' Dr 969126 Ã 40.00 22-F/2227-F Cover Plate - 3' Dr 969127 Ã 40.00 22 ALK Cover Plate - 3' Dr 971470 Ã 40.00 22 ALK Cover Plate - 4' Dr 971471 Ã 40.00

22 Mechanism Case - 3' Dr 970035 Ã 145.00 22 Mechanism Case - 4' Dr 970036 Ã 153.00

227 Dog Key 5/32" Pkg/2 090005 14.00 Ã 227 Dog Key 5/32" Pkg/10 090085 55.00 Ã Cover Plate Bearing Insert 968592 9.50 Ã Touch Bar Cover Bearing Insert 966268 9.50 Ã 22/22-F Rim Mtg. Package - 1 3/4" -2 1/4" Dr 900561 9.50 Ã 2227/27-F Mtg. Package - 1 3/4" Dr 900563 9.50 Ã 2227/27-F Mtg. Package - 2 1/4" Dr 900568 9.50 Ã

Push Bar 22 Series Push Bar - 3' Dr SP28 PBKIT.1001 Ã 146.00 22 Series Push Bar - 3' Dr SP313 PBKIT.1002 Ã 146.00 22 Series Push Bar - 4' Dr SP28 PBKIT.1003 Ã 155.00 22 Series Push Bar - 4' Dr SP313 PBKIT.1004 Ã 155.00

89



(continued) 22 Series

List Price


FinishedSP28, SP313

Baseplate Baseplate Bumper Pkg/4 090038 8.50 Ã Baseplate Return Spring Pkg/10 090039 9.50 Ã Dogging Shaft Pkg/2 090040 9.50 Ã Dogging Spring Pkg/2 090041 8.50 Ã Dogging Adaptor Spring Pkg/2 090042 11.50 Ã Dogging Adaptor Pkg/2 090043 9.50 Ã Dogging Hook Pkg/2 090044 9.50 Ã Baseplate Bearing Strip Pkg/2 090048 9.50 Ã 3/8 x 3/16 x 3/32 Washer 964013 9.50 Ã

Vertical Latches * 2227 Bottom Latch Retrofit Kit 050090 Ã 112.00 * 2227 Top Latch Retrofit Kit 050091 Ã 112.00** 2227 Bottom Latch Kit Less Cover 050401 112.00 Ã** 2227 Top Latch Kit Less Cover 050400 112.00 Ã 2227 PL Latch Kit Less Cover 050402 112.00 Ã

2227 Latch Case Cover 050566 Ã 41.00 2227 Latch Case Cover Screw Pkg 900850 Ã 9.50

** 2227 Latch Case Mtg. Bracket Kit 050546 22.00 Ã 2227 Top Latch Compression Spring Pkg/10 090056 9.50 Ã 2227 Top Latch Spring Pkg/10 090057 9.50 Ã 2227 Bolt Return Spring Pkg/10 090065 9.50 Ã 2227 Top Latch Aux. Bolt Spring Pkg/10 090076 9.50 Ã** 2227 Latch Case Screw Pkg 1-3/4" Door 900589 9.50 Ã * For Devices shipped before October 1998 ** Devices Shipped after October 1998

Vertical Rods 2227 Top Vertical Rod 109361 Ã 84.00 2227 Bottom Vertical Rod 109362 Ã 84.00

2227 Extension Rod 12" Kit 051803 Ã 22.00 2227 Extension Rod 36" Kit 051804 Ã 26.00

2227 Rod Guide Package 112063 Ã 40.00 2227 Rod Guide Mtg. Package 900919 Ã 9.50 2227 Rod Connector - Latch Pkg/2 090067 14.00 Ã 2227 Rod Connector - Center Case Pkg/2 090068 14.00 Ã 2227 Top or Bottom Rod Connector 050547 7.50 Ã 2227 Rod Extension Connector Pkg/4 090075 10.50 Ã 2227 Rod Roll Pin Pkg/10 090054 10.50 Ã

90



List Price US3,


Finished US28 US26D 313 US10 US4

�US15, US26,

315

Center Case 33A/35A Rim Center Case Kit L/Cover 050403 258.00 Ã Ã Ã Ã Ã Ã 33/3527A Center Case Kit L/Cover 050404 258.00 Ã Ã Ã Ã Ã Ã 33/3547A Center Case Kit L/Cover 050405 258.00 Ã Ã Ã Ã Ã Ã

33A/35A Rim Center Case Cover Kit 050483 Ã 41.00 74.00 54.00 48.00 48.00 97.00 33/3527A Center Case Cover Kit 050484 Ã 41.00 74.00 54.00 48.00 48.00 97.00 33/3547A/49A Center Case Cover Kit 050485 Ã 41.00 74.00 54.00 48.00 48.00 97.00 33/35A Center Case Cover Screws 900892 Ã 9.50 9.50 9.50 9.50 9.50 9.50

Control Link Pin Kit (w/Retaining Ring) 050529 9.50 Ã Ã Ã Ã Ã Ã Control Link Pin Retaining Ring Pkg/10 090107 9.50 Ã Ã Ã Ã Ã Ã Control Link Pin Pkg/10 090031 11.50 Ã Ã Ã Ã Ã Ã 33A/35A Device Mtg Package - 1 3/4" - 2 1/4" Dr 900619 9.50 Ã Ã Ã Ã Ã Ã 33/3547A Wood Door Mtg Package 900856 9.50 Ã Ã Ã Ã Ã Ã

Cover Plate / Conversion Kits 33A Hex Dog Conversion Kit 050114 Ã 57.00 Ã 57.00 57.00 57.00 57.00 35A Hex Dog Conversion Kit 050117 Ã 57.00 Ã 57.00 57.00 57.00 57.00 33A CD Conversion Kit 050115 Ã 75.00 Ã 75.00 75.00 75.00 75.00 35A CD Conversion Kit 050132 Ã 75.00 Ã 75.00 75.00 75.00 75.00 33A Fire or Less Dogging Cover Plate Kit 050133 Ã 35.00 Ã 35.00 35.00 35.00 35.00 35A Fire or Less Dogging Cover Plate Kit 050109 Ã 35.00 Ã 35.00 35.00 35.00 35.00 33A ALK Cover Plate Kit 050406 Ã 83.00 Ã 83.00 83.00 83.00 83.00 35A ALK Cover Plate Kit 050407 Ã 83.00 Ã 83.00 83.00 83.00 83.00 33A Center Case Cover Plate (1.42") 050474 Ã 22.00 Ã 22.00 22.00 22.00 22.00 35A Center Case Cover Plate (1.42") 050475 Ã 22.00 Ã 22.00 22.00 22.00 22.00 Cover Plate Anti-Rattle Spring Pkg/10 090036 9.50 Ã Ã Ã Ã Ã Ã Dogging Shaft Pkg/2 090040 9.50 Ã Ã Ã Ã Ã Ã

Push Bar * 33A/35A Push Bar Retrofit Kit - 3' Dr See Note Ã 161.00 188.00 174.00 258.00 251.00 295.00 * 33A/35A Push Bar Retrofit Kit - 4' Dr See Note Ã 172.00 207.00 186.00 271.00 258.00 306.00 33A/35A Push Bar Guide Pkg/10 090049 10.50 Ã Ã Ã Ã Ã Ã

* Note: To order, specify device type, size, finish. Example: PBKIT 33A 3' US28��US15 finish available with Series 35A, only

Items in Bold print indicate same part number is used for the old 33/35 series devices.

33A/35A Series

91



List Price US3,



�US15, US26,

315

Mechanism Case 33A Mechanism Case - 3' Dr 050486 Ã 112.00 Ã 139.00 139.00 139.00 159.00 33A Mechanism Case - 4' Dr 050487 Ã 159.00 Ã 183.00 183.00 183.00 206.00 35A Mechanism Case - 3' Dr 050488 Ã 112.00 Ã 139.00 139.00 139.00 159.00 35A Mechanism Case - 4' Dr 050489 Ã 159.00 Ã 183.00 183.00 183.00 206.00

CD/SS Cylinder Mtg Kit 107813 Ã Ã 45.00 48.00 48.00 48.00 54.00 CD/SS Cylinder Locating Washer Pkg 050490 11.50 Ã - - - - - CD/SS Mortise Cylinder Collar Pkg 050525 Ã Ã 35.00 35.00 41.00 35.00 41.00 CD/SS Cylinder Lock Nut Pkg 050526 10.50 Ã Ã Ã Ã Ã Ã CD Actuator Pkg/2 090045 9.50 Ã Ã Ã Ã Ã Ã * CD Dogging Plug Pkg/2 090046 8.50 Ã Ã Ã Ã Ã Ã 227 Dog Key 5/32" Pkg/2 090005 14.00 Ã Ã Ã Ã Ã Ã 227 Dog Key 5/32" Pkg/10 090085 55.00 Ã Ã Ã Ã Ã Ã Mechanism Case Brkt Kit 050530 7.50 Ã Ã Ã Ã Ã Ã Mechanism Case Brkt Screw Pkg/10 090073 7.50 Ã Ã Ã Ã Ã Ã 33A/35A Device Mtg Pkg 1 3/4" - 2 1/4" Door 900619 9.50 Ã Ã Ã Ã Ã Ã 33/3547A Wood Door Mtg Pkg 900856 9.50 Ã Ã Ã Ã Ã Ã * Devices shipped after July 1997

Baseplate Shock Absorber Pkg 050491 24.00 Ã Ã Ã Ã Ã Ã Baseplate Screw Pkg/10 090037 8.50 Ã Ã Ã Ã Ã Ã Baseplate Bumper Pkg/4 090038 8.50 Ã Ã Ã Ã Ã Ã Baseplate Return Spring Pkg/10 090039 9.50 Ã Ã Ã Ã Ã Ã Dogging Shaft Pkg/2 090040 9.50 Ã Ã Ã Ã Ã Ã Dogging Spring Pkg/2 090041 8.50 Ã Ã Ã Ã Ã Ã Dogging Adaptor Spring Pkg/2 090042 11.50 Ã Ã Ã Ã Ã Ã Dogging Adaptor Pkg/2 090043 9.50 Ã Ã Ã Ã Ã Ã Dogging Hook Pkg/2 090044 9.50 Ã Ã Ã Ã Ã Ã 227 Dog Key 5/32" Pkg/2 090005 14.00 Ã Ã Ã Ã Ã Ã 227 Dog Key 5/32" Pkg/10 090085 55.00 Ã Ã Ã Ã Ã Ã

EL Dogging Rod Kit - 3' 050531 45.00 Ã Ã Ã Ã Ã Ã EL Dogging Rod Kit - 4' 050532 45.00 Ã Ã Ã Ã Ã Ã EL 6' Cable and Connector 110388 36.00 Ã Ã Ã Ã Ã Ã EL Potted Circuit Breaker 050534 235.00 Ã Ã Ã Ã Ã Ã EL Solenoid/Plunger 050535 259.00 Ã Ã Ã Ã Ã Ã HD-EL Solenoid 050536 259.00 Ã Ã Ã Ã Ã Ã HD-EL Solenoid Plunger 050537 96.00 Ã Ã Ã Ã Ã Ã EL Dogging Rod Retainer 050538 10.50 Ã Ã Ã Ã Ã Ã EL Receptacle Connector 050539 9.50 Ã Ã Ã Ã Ã Ã EL Female Terminal 050540 9.50 Ã Ã Ã Ã Ã Ã��US15 finish available with Series 35A, only

Items in Bold print indicate same part number is used for the old 33/35 Series devices.

(continued) Series 33A/35A

92



List Price US3,



�US15, US26,

315

Baseplate (continued) HD-EL Dog Screw 050541 11.50 Ã Ã Ã Ã Ã Ã HD-EL Solenoid Bracket 050542 20.00 Ã Ã Ã Ã Ã Ã HD-EL Dogging Spring 050543 11.50 Ã Ã Ã Ã Ã Ã

SS Cable 050544 105.00 Ã Ã Ã Ã Ã Ã SS Housing 050545 349.00 Ã Ã Ã Ã Ã Ã

Vertical Latches 33/3527A Top Latch Kit Less Cover 050400 112.00 Ã Ã Ã Ã Ã Ã 33/3527A Bottom Latch Kit Less Cover 050401 112.00 Ã Ã Ã Ã Ã Ã 33/3527A Pullman Latch Kit Less Cover 050402 112.00 Ã Ã Ã Ã Ã Ã

33/3547A Top Latch Kit 050492 217.00 Ã Ã Ã Ã Ã Ã 33/3547A Bottom Latch Kit 050493 176.00 Ã Ã Ã Ã Ã Ã ES33/3547A Top Latch Kit 050128 159.00 Ã Ã Ã Ã Ã Ã

* 33/3548A Top Latch Kit-(non EL) 050494 317.00 Ã Ã Ã Ã Ã Ã * EL33/3548A Top Latch Kit 050516 300.00 Ã Ã Ã Ã Ã Ã * 33/3548A Bottom Latch Kit 050495 341.00 Ã Ã Ã Ã Ã Ã 33/3548A Latch Retrofit Kit-(non EL) 050047 532.00 Ã Ã Ã Ã Ã Ã 33/3548A-F Latch Retrofit Kit-(non EL) 050048 532.00 Ã Ã Ã Ã Ã Ã EL33/3548A Latch Retrofit Kit 050522 532.00 Ã Ã Ã Ã Ã Ã EL33/3548A-F Latch Retrofit Kit 050523 532.00 Ã Ã Ã Ã Ã Ã

33/3527A Latch Cover Kit w/Screws 050496 Ã 60.00 100.00 66.00 60.00 60.00 102.00 33/3527A Latch Cover Screw Pkg 900850 Ã 9.50 9.50 9.50 9.50 9.50 9.50

33/3527A Top Latch Compression Spring Pkg/10 090056 9.50 Ã Ã Ã Ã Ã Ã 33/3527A PL Top Latch Spring Pkg/10 090057 9.50 Ã Ã Ã Ã Ã Ã 33/3527A Top Latch Aux. Bolt Spring Pkg/10 090076 9.50 Ã Ã Ã Ã Ã Ã 33/3527A-F AFL Strike Hole Plug 050509 8.50 Ã Ã Ã Ã Ã Ã 33/3527A Latch Mtg Bracket Kit 050546 22.00 Ã Ã Ã Ã Ã Ã 33/3527A Latch Screw Pkg 900589 9.50 Ã Ã Ã Ã Ã Ã 33/3527A-F LBR Latch Mounting Package 900980 8.50 Ã Ã Ã Ã Ã Ã LBR Fire Latch/Strike Kit 050171 354.00 Ã Ã Ã Ã Ã Ã* For service replacement only. Refer to Retrofit Kits 050047, 050048, 050522 and 050523 to convert 33/3547, 33/3547A Device to 33/3548 OR

33A/3548A.��US15 finish available with Series 35A, only


33A/35A Series (continued)

93



List Price US3,


Finished US28�US32D

US26D 313 US10 US4

�US15, US26,

315

Vertical Latches 33/3547A Latch Mounting Bracket Kit 109324 43.00 Ã Ã Ã Ã Ã Ã 33/3548A Latch Mounting Bracket Kit 112868 48.00 Ã Ã Ã Ã Ã Ã 33/3547A Latch Brkt Mtg. Screw (Latch) Pkg/6 090059 9.50 Ã Ã Ã Ã Ã Ã 33/3547A Latch Brkt Mtg. Screw (Door) Pkg/6 090061 9.50 Ã Ã Ã Ã Ã Ã 33/3547A/48A Latch Linkage Pin Retaining Ring Pkg/10 090063 9.50 Ã Ã Ã Ã Ã Ã 33/3547A Latch Link Pin Pkg/10 090064 9.50 Ã Ã Ã Ã Ã Ã 33/3547A Bolt Return Spring Pkg/10 090065 9.50 Ã Ã Ã Ã Ã Ã 33/3547A Top Latch Compression Spring Pkg/10 090066 8.50 Ã Ã Ã Ã Ã Ã

Vertical Rods 3327A Top Rod Kit 050512 Ã 61.00 Ã 71.00 84.00 84.00 84.00 3527A Top Rod Kit 050513 Ã 61.00 71.00 71.00 84.00 84.00 84.00 3327A Bottom Rod Kit 050514 Ã 61.00 Ã 71.00 84.00 84.00 84.00 3527A Bottom Rod Kit 050515 Ã 61.00 Ã 71.00 84.00 84.00 84.00 33/3547A/48A Adj. Top Rod Kit - 6'8"-8'4" Dr 050519 71.00 Ã Ã Ã Ã Ã Ã 33/3547A/48A Bottom Rod Kit 050520 71.00 Ã Ã Ã Ã Ã Ã 3327A One Piece Top Rod Kit - 8' 050650 Ã Ã 179.00 179.00 114.00 90.00 179.00 3327A One Piece Top Rod Kit - 10' 050651 Ã Ã 198.00 198.00 124.00 110.00 193.00 3327A One Piece Top Rod Kit - 12' 050652 Ã Ã 209.00 209.00 138.00 129.00 217.00 3527A One Piece Top Rod Kit - 8' 050653 Ã Ã 179.00 179.00 114.00 90.00 179.00 3527A One Piece Top Rod Kit - 10' 050654 Ã Ã 198.00 198.00 124.00 110.00 193.00 3527A One Piece Top Rod Kit - 12' 050655 Ã Ã 209.00 209.00 138.00 129.00 217.00

3327A Extension Rod 12" Kit 051801 Ã 22.00 Ã 22.00 22.00 22.00 22.00 3527A Extension Rod 12" Kit 051809 Ã 22.00 Ã 22.00 22.00 22.00 22.00 3327A Extension Rod 36" Kit 051807 Ã 26.00 26.00 26.00 26.00 26.00 26.00 3527A Extension Rod 36" Kit 051811 Ã 26.00 26.00 26.00 26.00 26.00 26.00 3327A Extension Rod 60" Kit 050643 Ã 207.00 Ã 207.00 240.00 235.00 251.00 3527A Extension Rod 60" Kit 050645 Ã 207.00 Ã 207.00 240.00 235.00 251.00

33/3547A/48A Extension Rod Kit - Adj 8'4"-10' 051808 22.00 Ã Ã Ã Ã Ã Ã 33/3547A/48A Extension Rod Kit - Adj 10'-11'8 050622 74.00 Ã Ã Ã Ã Ã Ã 33/3547A/48A Extension Rod Kit - Adj 11'8-13'4 050623 74.00 Ã Ã Ã Ã Ã Ã 33/3547A/48A Extension Rod Kit - Adj 13'4-15' 050624 84.00 Ã Ã Ã Ã Ã Ã

33/3527A Rod Guide Pkg 105952 - 62.00 93.00 64.00 64.00 64.00 93.00 33/3527A Rod Guide Mtg Pkg 900565 9.50 Ã Ã Ã Ã Ã Ã 33/3527A Rod Roll Pin Pkg/10 090054 10.50 Ã Ã Ã Ã Ã Ã 33/3527A Rod Connector-Latch Pkg/2 090067 14.00 Ã Ã Ã Ã Ã Ã 33/3527A Rod Connector-C/Case Pkg/2 090068 14.00 Ã Ã Ã Ã Ã Ã

33/3547A Ratchet Release Pkg 106222 Ã 105.00 Ã 105.00 105.00 105.00 Ã 33/3547A Ratchet Release Spacer 1/8" 970978 Ã 15.00 Ã 15.00 15.00 15.00 Ã 33/3547A Ratchet Lever Spring Pkg/2 090069 8.50 Ã Ã Ã Ã Ã Ã 33/3547A Ratchet Release Screw Pkg/2 090070 11.50 Ã Ã Ã Ã Ã Ã 33/3547A Rod Connecting Screw Pkg/2 090071 11.50 Ã Ã Ã Ã Ã Ã 33/3548A Rod Connecting Screw Pkg/2 090072 11.50 Ã Ã Ã Ã Ã Ã 33/3547A Rod Adjusting Pkg 900620 15.00 Ã Ã Ã Ã Ã Ã��US15 and US32D finish available with Series 35A, only


(continued) Series 33A/35A

94



Description Non-FinishedList

Price

Vertical Latches49 Top Latch Assembly 24090110 205.0049 Bottom Latch Assembly 24090128 222.00

Centerslide Kits33/3549 Centerslide Kit 24090136 315.00

49 Cable AssembliesTop Cable Assembly Door Opening Heights 6'8" to 8'4" - specify height 179.00

Door Opening Heights 8'5" to 10'0" - specify height 197.00Door Opening Heights 6'8" to 8'4" - specify height 184.00

Bottom Cable Assembly Door Opening Heights 8'5" to 10'0" - specify height 205.00Note: Door Opening Height must be specified when ordering cable assemblies. For door opening heights over 10', consult factory for pricing and lead time.* For Complete 49 Cable System kits, see Page 29.

Mounting Packages49 Bottom Mounting Package 23946437 87.0049 Top Mounting Package 23946429 78.0033/3549A HM/AL Centerside Mounting Package 23946460 87.00

Misc.Cable Removal Tool - qty 1 24052979 11.50Cable Removal Tool - Pkg/10 24090706 94.00338 Filler Plate 24230914 70.00Spacer Block Kit 3/4" undercut 24231516 70.00

33A/3549A Series

95


Price Book 1Effective March 3, 2014 • Rev. 3/14 95

List Price US3,


Finished US28 US26D 313 US10 US4US26,

315

End Cap 330/350 End Cap Kit for Lock Stile 050014 Ã 62.00 68.00 62.00 77.00 69.00 69.00 RX330/350 End Cap Mtg Bracket for Lock Stile 050524 8.50 Ã Ã Ã Ã Ã Ã

Push Bar * 33A/35A Push Bar Retrofit Kit - 3' Dr See Note Ã 161.00 188.00 174.00 258.00 251.00 295.00 * 33A/35A Push Bar Retrofit Kit - 4' Dr See Note Ã 172.00 207.00 186.00 271.00 258.00 306.00 33A/35A Push Bar Guide Pkg/10 090049 10.50 Ã Ã Ã Ã Ã Ã* Note: To order, specify device type, size, finish. Example: PBKIT 33A 3' US28

Push Bar Assemblies are for the SS & RX 330/350 only. Push bars can not be replaced on the standard 330/350 Dummy Push Bar.

33A Fire or Less Dogging Cover Plate Kit 050133 Ã 35.00 Ã 35.00 35.00 35.00 35.00 35A Fire or Less Dogging Cover Plate Kit 050109 Ã 35.00 Ã 35.00 35.00 35.00 35.00 RX/SS 330/350 Spacer Pkg/2 090047 20.00 Ã Ã Ã Ã Ã Ã RX/SS 330/350 Baseplate Bearing Strip Pkg/2 090048 9.50 Ã Ã Ã Ã Ã Ã

Screw Packs 330/350 Push Bar 1 3/4" Door 900835 9.50 Ã Ã Ã Ã Ã Ã 330/350 Push Bar 2 1/4" Door 900836 9.50 Ã Ã Ã Ã Ã Ã 230/990DT x 330/350 1 3/4" Dr 050140 Ã Ã 11.50 11.50 11.50 11.50 11.50 230/990DT x 330/350 2 1/4" Dr 050141 Ã Ã 11.50 11.50 11.50 11.50 11.50 696/697DT x 330/350 1 3/4" Dr 050142 Ã Ã 11.50 11.50 11.50 11.50 11.50 696/697DT x 330/350 2 1/4" Dr 050143 Ã Ã 11.50 11.50 11.50 11.50 11.50

Series 330/350

96



55n Series

List Price


FinishedUS10B, US26D US10 US4

US3, US26, SPBLK

Center Case Kits (includes mounting screws) 55EO Center Case Kit 050183 Ã 646.00 698.00 646.00 821.00 55NL Center Case Kit 050184 Ã 692.00 782.00 692.00 866.00 5575 Center Case RHR Kit 050185 Ã 412.00 460.00 412.00 525.00 5575 Center Case LHR Kit 050186 Ã 412.00 460.00 412.00 525.00 5575-F Center Case RHR Kit 050187 Ã 458.00 508.00 458.00 573.00 5575-F Center Case LHR Kit 050188 Ã 458.00 508.00 458.00 573.00 5547 RHR Center Case Kit 050189 Ã 412.00 460.00 412.00 525.00 5547 LHR Center Case Kit 050191 Ã 412.00 460.00 412.00 525.00 5547-F RHR Center Case Kit 050192 Ã 458.00 508.00 458.00 573.00 5547-F LHR Center Case Kit 050193 Ã 458.00 508.00 458.00 573.00 5547WDC RHR Center Case Kit 050194 Ã 458.00 508.00 458.00 573.00 5547WDC LHR Center Case Kit 050195 Ã 458.00 508.00 458.00 573.00

Center Case Parts - Rim 55CK-NL Conversion Kit (Order Trim Separate) 050105 42.00 Ã Ã Ã Ã 55 Rim Backplate w/Screws 050332 Ã 56.00 60.00 56.00 60.00 55 Case Bushing 050333 11.50 Ã Ã Ã Ã 55 Rim Spring Clip w/Screws 050334 17.00 Ã Ã Ã Ã 55 Rim Latch Bolt w/Axle and Spring 050352 121.00 Ã Ã Ã Ã 55 Rim Latch Bolt Axle 050353 9.50 Ã Ã Ã Ã 55 Rim Latch Bolt Spring 050354 9.50 Ã Ã Ã Ã 55NL CAM RH 050355 28.00 Ã Ã Ã Ã 55NL CAM LH 050356 28.00 Ã Ã Ã Ã 55 Axle Retainer Pkg/2 090023 21.00 Ã Ã Ã Ã 55 Spring Anchor Screw Pkg/10 090024 7.50 Ã Ã Ã Ã 55 Backplate Screw Pkg/10 090025 7.50 Ã Ã Ã Ã 55 Rim Center Case Retaining Screw Pkg/2 090022 35.00 Ã Ã Ã Ã 55 Rim Center Case Retaining Screw Pkg/10 090050 156.00 Ã Ã Ã Ã 55 Rim Center Case Mounting Pkg 900507 Ã 9.50 9.50 9.50 9.50 55 Rim 2" Dr SNB Mounting Pkg 900512 Ã 9.50 9.50 9.50 9.50

Center Case Parts - 5547 5547 Control Lever 050357 38.00 Ã Ã Ã Ã 55 Retaining Screw Pkg/10 090051 156.00 Ã Ã Ã Ã 55 Retaining Screw Pkg/2 090026 35.00 Ã Ã Ã Ã 55 Case Bushing 050333 11.50 Ã Ã Ã Ã 5547 Center Case Mounting Pkg 900508 Ã 9.50 9.50 9.50 9.50 5547 2" Dr SNB Mounting Pkg 900514 Ã 9.50 9.50 9.50 9.50 5547 Blind Fastener Package 900539 36.00 Ã Ã Ã Ã

97



(continued) Series 55

List Price



US3, US26, SPBLK

Center Case Kits - 5547-F/5547WDC/5575/5575-F 5547-F/47WDC/75/75F Lift Member 050360 84.00 Ã Ã Ã Ã 5547-F/47WDC Lift Member Channel 050359 32.00 Ã Ã Ã Ã 5547/47-F Latch Release Spring 050362 9.50 Ã Ã Ã Ã 5547-F/47WDC Spring Anchor 050363 11.50 Ã Ã Ã Ã 5547-F/47WDC Lift Member Lever 050358 40.00 Ã Ã Ã Ã 55 Case Bushing 050333 11.50 Ã Ã Ã Ã 55 Retaining Screw Pkg/10 090051 156.00 Ã Ã Ã Ã 55 Retaining Screw Pkg/2 090026 35.00 Ã Ã Ã Ã 55 Spring Anchor Screw Pkg/10 090024 7.50 Ã Ã Ã Ã Lift Member Guide Screw Pkg/10 090027 7.50 Ã Ã Ã Ã 5547-F/5575/75-F Center Case Mounting Pkg 900509 Ã 9.50 9.50 9.50 9.50 5547WDC Center Case Mounting Pkg 900507 Ã 9.50 9.50 9.50 9.50 5547WDC 2" Dr SNB Mounting Pkg 900512 Ã 9.50 9.50 9.50 9.50 5547/75 2" Dr SNB Mounting Pkg 900514 Ã 9.50 9.50 9.50 9.50

Crossbars 42" Standard Crossbar Kit 050004 Ã 174.00 178.00 174.00 184.00 42" Knurled Crossbar Kit 050005 Ã 279.00 285.00 279.00 302.00 37" Crossbar Reinforcement Kit 050459 94.00 Ã Ã Ã Ã

End Case 55R/5575/5547 RHR End Case Kit 050196 Ã 277.00 302.00 277.00 394.00 55R/5575/5547 LHR End Case Kit 050197 Ã 277.00 302.00 277.00 394.00 5547/75-F RHR End Case Kit 050198 Ã 277.00 302.00 277.00 394.00 5547/75-F LHR End Case Kit 050199 Ã 277.00 302.00 277.00 394.00

55 Series End Case Backplate 050364 11.50 Ã Ã Ã Ã 55 Retaining Screw Pkg/10 090051 156.00 Ã Ã Ã Ã 55 Retaining Screw Pkg/2 090026 35.00 Ã Ã Ã Ã 55 End Case Spring Pkg/20 090052 61.00 Ã Ã Ã Ã 55 End Case Spring Pkg/4 090028 30.00 Ã Ã Ã Ã 55 End Case Spring Lever 050366 35.00 Ã Ã Ã Ã 55 Series End Case Mounting Pkg 900507 Ã 9.50 9.50 9.50 9.50

Lever Arms 55 R/M/CV LH Lever Arm Kit 050112 Ã 297.00 317.00 258.00 340.00 55 R/M/CV RH Lever Arm Kit 050136 Ã 297.00 317.00 258.00 340.00 5547-F/75-F LH Lever Arm Kit 050137 Ã 297.00 317.00 258.00 340.00 5547-F/75-F RH Lever Arm Kit 050139 Ã 297.00 317.00 258.00 340.00

55 Wedgetite Screw Pkg/2 090008 7.50 Ã Ã Ã Ã 55 Wedgetite Screw Pkg/30 090081 40.00 Ã Ã Ã Ã Crossbar Tube Attaching Wedge Pkg/2 090020 9.50 Ã Ã Ã Ã Crossbar Tube Attaching Ring Pkg/2 090021 11.50 Ã Ã Ã Ã 55 Dog Screw Pkg/2 090029 17.00 Ã Ã Ã Ã 55 Dog Screw Pkg/10 090053 56.00 Ã Ã Ã Ã 227 Dog Key 5/32" Pkg/2 090005 14.00 Ã Ã Ã Ã 227 Dog Key 5/32" Hex Pkg/10 090085 55.00 Ã Ã Ã Ã 55 Series Special Hex Key (Reversing Pkg) 103866 9.50 Ã Ã Ã Ã

98



Series 55n (continued)

List Price



US3, US26, SPBLK

Vertical Latches5547-F Soffit Latch Kit 114141 157.00 Ã Ã Ã Ã5547-F Release Guide Cover w/Screws 050278 Ã 156.00 156.00 156.00 211.005547/47WDC Bottom Bracket Guide 050370 64.00 Ã Ã Ã Ã5547 Rod Connector Rivet Pkg/10 090011 7.50 Ã Ã Ã Ã5547WDC Top Plate Screw Pkg Pkg/10 090033 10.50 Ã Ã Ã Ã5547-F Plunger Release Brkt Screws Pkg/10 090034 Ã 15.00 28.00 15.00 15.005547-F Flush Tran. Release Screws Pkg/10 090035 Ã 11.50 11.50 11.50 11.505547/47WDC Top Plate 100316 95.00 Ã Ã Ã Ã5547 Soffit Latch Mounting Pkg 900502 7.50 Ã Ã Ã Ã5547-F Plunger Release Bracket 900576 Ã 63.00 63.00 63.00 63.005547-F Flush Transom Release Brkt w/Screws 900614 Ã 93.00 93.00 93.00 93.005547-F Top Latch Release Screws Pkg/20 PKGSRV.1018 9.50 Ã Ã Ã Ã

Vertical Rods5547 Top Rod Kit 6'8"-8' Door 050053 303.00 Ã Ã Ã Ã5547-F Top Rod Kit 6'8"-8' Door 050457 Ã 303.00 303.00 303.00 303.005547WDC Top Rod Kit 6'8"-8' Door 050110 303.00 Ã Ã Ã ÃES5547 Top Latch/Rod Serv Kit 050656 342.00 Ã Ã Ã Ã

5547 Top Rod Kit 8'-10' Door 050372 322.00 Ã Ã Ã Ã5547-F Top Rod Kit 8'-10' Door 050373 - 322.00 322.00 322.00 322.005547WDC Top Rod Kit 8'-10' Door 050374 322.00 Ã Ã Ã Ã

5547 Bottom Rod Kit 050036 303.00 Ã Ã Ã Ã5547-F Bottom Rod Kit 050458 303.00 Ã Ã Ã Ã5547WDC Bottom Rod Kit 050096 303.00 Ã Ã Ã Ã

5547 Extension Rod Kit 8'-10' Door 051704 22.00 Ã Ã Ã Ã5547-F Extension Rod Kit 8'-10' Door 051705 22.00 Ã Ã Ã Ã5547WDC Extension Rod Kit 8'-10' Door 051707 22.00 Ã Ã Ã Ã5547 Extension Rod Kit 10'-12' Door 050631 73.00 Ã Ã Ã Ã5547-F Extension Rod Kit 10'-12' Door 050634 155.00 Ã Ã Ã Ã5547WDC Extension Rod Kit 10'-12' Door 050639 162.00 Ã Ã Ã Ã5547 Extension Rod Kit 12'-14' Door 050632 73.00 Ã Ã Ã Ã5547-F Extension Rod Kit 12'-14' Door 050635 155.00 Ã Ã Ã Ã5547WDC Extension Rod Kit 12'-14' Door 050640 162.00 Ã Ã Ã Ã5547 Extension Rod Kit 14'-16' Door 050633 73.00 Ã Ã Ã Ã5547-F Extension Rod Kit 14'-16' Door 050636 155.00 Ã Ã Ã Ã5547WDC Extension Rod Kit 14'-16' Door 050641 162.00 Ã Ã Ã Ã

5547 Rod Control Housing 050367 275.00 Ã Ã Ã Ã5547 Top Rod Connector w/Pin 050368 37.00 Ã Ã Ã Ã5547 Bottom Rod Connector w/Pin 050369 35.00 Ã Ã Ã Ã5547-F Rod Guide Mounting Screws Pkg/10 090018 7.50 Ã Ã Ã Ã5547 Rod Connector Pin Pkg/2 090030 10.50 Ã Ã Ã Ã5547 Top Rod 1/8 x 5/8 Roll Pin Pkg/10 090032 7.50 Ã Ã Ã Ã5547WDC Latch Control 100315 293.00 Ã Ã Ã Ã5547-F Bottom Guide Package 100741 64.00 Ã Ã Ã Ã5547-F Rod Guide Package 105144 11.50 Ã Ã Ã Ã5547-F Rod Set Mounting Package 900541 7.50 Ã Ã Ã Ã

99



Series 88

List Price



US3, US26, SPBLK

Backplate Conversion Kits88CK-NL Converts TP,K to NL - Panic 050101 Ã 43.00 44.00 39.00 45.0088CK-TP Converts EO,DT,NL,K to TP - Panic 050102 Ã 54.00 57.00 50.00 61.0088CK-K/L Converts EO,DT,NL,TP to K or L - Panic 050103 Ã 92.00 96.00 88.00 102.0088CK-NL-F Converts TP,K to NL - Fire 050106 Ã 48.00 49.00 46.00 50.0088CK-TP-F Converts EO,DT,NL,K to TP - Fire 050107 Ã 61.00 63.00 54.00 69.0088CK-K/L-F Converts EO,DT,NL,TP to K or L - Fire 050108 Ã 92.00 96.00 90.00 102.008827CK-TP Converts EO,DT,K to TP - Panic or Fire 050104 164.00 Ã Ã Ã Ã8827CK-K/L-K/L-F Converts EO,DT,TP to K or L - Panic or Fire 050200 163.00 Ã Ã Ã Ã8827CK-K-NL/K-NL-F 050201 184.00 Ã Ã Ã Ã8827CK-TP-NL/TP-NL-F 050202 166.00 Ã Ã Ã Ã8827CK-EO/DT/TL 050447 28.00 Ã Ã Ã Ã

Center Case Kits (includes mounting screws)88EO/DT/NL Rim Center Case Kit 050409 Ã 537.00 562.00 450.00 587.0088TP Rim Center Case Kit 050410 Ã 537.00 562.00 450.00 587.0088K/L RHR Center Case Kit 050411 Ã 537.00 562.00 450.00 587.0088K/L LHR Center Case Kit 050412 Ã 537.00 562.00 450.00 587.008875 RHR Center Case Kit 050413 Ã 431.00 442.00 359.00 469.008875 LHR Center Case Kit 050414 Ã 431.00 442.00 359.00 469.008827EO/DT/TL Center Case Kit 050415 Ã 284.00 291.00 265.00 311.008827TP Center Case Kit 050416 Ã 378.00 385.00 329.00 394.008827K/L Center Case Kit 050417 Ã 473.00 495.00 404.00 514.008827TP-NL Center Case Kit 050418 Ã 378.00 385.00 329.00 394.008827K-NL Center Case Kit 050419 Ã 473.00 495.00 404.00 514.008875-F RHR Center Case Kit 050420 Ã 495.00 520.00 407.00 539.008875-F LHR Center Case Kit 050421 Ã 495.00 520.00 407.00 539.008847-F RHR Center Case Kit 050422 Ã 495.00 520.00 407.00 539.008847-F LHR Center Case Kit 050423 Ã 495.00 520.00 407.00 539.0088EO-F/NL-F RHR Center Case Kit 050424 Ã 674.00 798.00 798.00 842.0088EO-F/NL-F LHR Center Case Kit 050425 Ã 674.00 798.00 798.00 842.00

Center Case Kits (includes mounting screws)88TP-F RHR Center Case Kit 050426 Ã 700.00 829.00 829.00 877.0088TP-F LHR Center Case Kit 050427 Ã 700.00 829.00 829.00 877.0088K/L-F RHR Center Case Kit 050428 Ã 700.00 829.00 829.00 877.0088K/L-F LHR Center Case Kit 050429 Ã 700.00 829.00 829.00 877.008827EO-F/TL-F Center Case Kit 050430 Ã 366.00 380.00 303.00 397.008827TP-F Center Case Kit 050431 Ã 532.00 556.00 443.00 581.008827K/L-F Center Case Kit 050432 Ã 558.00 584.00 469.00 610.008827TP-NL-F Center Case Kit 050433 Ã 514.00 540.00 422.00 561.008827K-NL-F Center Case Kit 050434 Ã 568.00 584.00 475.00 620.00

100



Series 88 (continued)

List Price



US3, US26, SPBLK

Center Case Parts - Rim * 88 Thumbpiece Lift Replacement Kit 050019 61.00 Ã Ã Ã Ã

88 Rim Auxiliary Backplate 050260 Ã 38.00 40.00 38.00 40.0088-F Master Cam RH 050273 54.00 Ã Ã Ã Ã88-F Master Cam LH 050274 54.00 Ã Ã Ã Ã88-F Auxiliary Bolt RH 050275 43.00 Ã Ã Ã Ã88-F Auxiliary Bolt LH 050276 43.00 Ã Ã Ã Ã88 Cylinder Anchor Plate 050331 8.50 Ã Ã Ã Ã88 Latchbolt w/Axle Kit 050497 62.00 Ã Ã Ã Ã88-F Latchbolt w/Axle Kit 050498 64.00 Ã Ã Ã Ã88 Rim Latch Retainer Plate 050499 9.50 Ã Ã Ã Ã88 Rim Latch Tail, Spring, Rivet Kit 050500 40.00 Ã Ã Ã Ã88 Rim Latch Tail Spring Pkg/10 050393 8.50 Ã Ã Ã Ã88 Rim Master Cam 050501 22.00 Ã Ã Ã Ã88NL Cylinder Cam 050502 25.00 Ã Ã Ã Ã88NL-F Cylinder Cam 050503 22.00 Ã Ã Ã Ã88K/L-F Knob Cam Lift 050504 37.00 Ã Ã Ã Ã88K/L-F Cylinder Cam 050505 22.00 Ã Ã Ã Ã88K/L-F Knob Cam Bracket 050506 75.00 Ã Ã Ã Ã88TP/-F Cylinder Cam 050508 11.50 Ã Ã Ã Ã88 Rim Latch Bolt Axle Pkg/4 090001 9.50 Ã Ã Ã Ã88 Rim Center Case Rivet Pkg/10 090002 9.50 Ã Ã Ã Ã88-F Rim Gravity Dog Spring Pkg/5 090009 9.50 Ã Ã Ã Ã88K/L-F Retaining Ring Pkg/10 090015 9.50 Ã Ã Ã Ã88-F Auxiliary Bolt Return Spring Pkg/5 090017 9.50 Ã Ã Ã ÃHex Socket Wrench 5/32" 113853 6.50 Ã Ã Ã Ã88 C/C or E/C Mtg Pkg (CS and MS) 900503 Ã 10.50 10.50 10.50 10.5088 C/C or E/C Mtg Pkg (CS Screws) 900504 Ã 9.50 9.50 9.50 9.5088 C/C or E/C Mtg Pkg (MS Scr 1-3/4" Dr) 900505 Ã 8.50 8.50 8.50 8.5088 C/C or E/C Mtg Pkg (MS Scr 2-1/4" Dr) 900506 Ã 8.50 8.50 8.50 8.5088 Rim Latch Retainer Plate Screw Pkg/10 900610 9.50 Ã Ã Ã Ã88 Backplate Screw Pkg/4 900613 9.50 Ã Ã Ã Ã

* For 88TP/TP-F devices shipped after June 2000. For devices shipped before June 2000, replace 050102 for 88TP or 050107 for 88TP-F.

101




List Price



US3, US26, SPBLK

Center Case Parts - Surface Vertical88 Cylinder Anchor Plate 050331 8.50 Ã Ã Ã Ã8827/27-F Rod Control 050446 75.00 Ã Ã Ã Ã8827K/K-NL/TP/TP-NL/-F Cylinder Cam 050448 22.00 Ã Ã Ã Ã8827K/K-NL/-F Knob Hub 050449 84.00 Ã Ã Ã Ã8827K-NL/TP-NL Backplate Pin Pkg/2 090012 17.00 Ã Ã Ã Ã8827/27-F Rod Control Pin Pkg/2 090016 9.50 Ã Ã Ã Ã88 C/C or E/C Mtg Pkg (CS and MS) 900503 Ã 10.50 10.50 10.50 10.5088 C/C or E/C Mtg Pkg (CS Screws) 900504 Ã 9.50 9.50 9.50 9.5088 C/C or E/C Mtg Pkg (MS Scr 1-3/4" Dr) 900505 Ã 8.50 8.50 8.50 8.5088 C/C or E/C Mtg Pkg (MS Scr 2-1/4" Dr) 900506 Ã 8.50 8.50 8.50 8.508827 Backplate Screw Pkg 900615 9.50 Ã Ã Ã Ã

Center Case Parts - Concealed Vertical/Mortise8847-F/75/75-F Latch Control LH 050209 149.00 Ã Ã Ã Ã8847-F/75/75-F Latch Control RH 050210 149.00 Ã Ã Ã Ã8847-F/75/75-F Backplate w/Screws 050211 11.50 Ã Ã Ã Ã88 Cylinder Anchor Plate 050331 8.50 Ã Ã Ã Ã8847/75-F Flat Point Set Screw Pkg/5 090013 11.50 Ã Ã Ã Ã8847-F/75/75-F C/Case Spring Pkg/2 090014 9.50 Ã Ã Ã Ã88 C/C or E/C Mtg Pkg (CS and MS) 900503 Ã 10.50 10.50 10.50 10.5088 C/C or E/C Mtg Pkg (CS Screws) 900504 Ã 9.50 9.50 9.50 9.5088 C/C or E/C Mtg Pkg (MS Scr 1-3/4" Dr) 900505 Ã 8.50 8.50 8.50 8.5088 C/C or E/C Mtg Pkg (MS Scr 2-1/4" Dr) 900506 Ã 8.50 8.50 8.50 8.508827 Backplate Screw Pkg 900615 9.50 Ã Ã Ã Ã

Crossbars42" Standard Crossbar Kit 050004 Ã 174.00 178.00 174.00 184.0042" Knurled Crossbar Kit 050005 Ã 279.00 285.00 279.00 302.0037" Crossbar Reinforcement Kit 050459 94.00 Ã Ã Ã Ã

102




List Price



US3, US26, SPBLK

End Case88 R/M/V End Case Kit 050435 Ã 184.00 199.00 156.00 211.008827-F/8875-F/8847-F End Case Kit 050436 Ã 249.00 257.00 209.00 276.0088-F Rim End Case Kit 050437 Ã 217.00 234.00 184.00 253.00

88 End Case Spring Pkg/10 090080 40.00 Ã Ã Ã Ã88 End Case Spring Pkg/2 090003 10.50 Ã Ã Ã Ã88 End Case Spring Stop Kit 050451 11.50 Ã Ã Ã Ã88-F End Case Spring Stop Kit 050452 11.50 Ã Ã Ã Ã88/88-F End Case Spring Tube 050476 9.50 Ã Ã Ã Ã88/88-F Spring Tube Bracket w/Screws Kit 050477 9.50 Ã Ã Ã Ã88 C/C or E/C Mtg Pkg (CS and MS) 900503 Ã 10.50 10.50 10.50 10.5088 C/C or E/C Mtg Pkg (CS Screws) 900504 Ã 9.50 9.50 9.50 9.5088 C/C or E/C Mtg Pkg (MS Scr 1-3/4" Dr) 900505 Ã 8.50 8.50 8.50 8.5088 C/C or E/C Mtg Pkg (MS Scr 2-1/4" Dr) 900506 Ã 8.50 8.50 8.50 8.50

Lever Arms88 R/M/V RH Lever Arm Kit 050438 Ã 145.00 152.00 122.00 156.0088 R/M/V LH Lever Arm Kit 050439 Ã 145.00 152.00 122.00 156.0088-F Rim RH Lever Arm Kit 050440 Ã 198.00 203.00 174.00 209.0088-F Rim LH Lever Arm Kit 050441 Ã 198.00 203.00 174.00 209.008827-F/47-F RH Lever Arm Kit 050442 Ã 198.00 203.00 174.00 209.008827-F/47-F LH Lever Arm Kit 050443 Ã 198.00 203.00 174.00 209.008875-F RH Lever Arm Kit 050444 Ã 198.00 203.00 174.00 209.008875-F LH Lever Arm Kit 050445 Ã 198.00 203.00 174.00 209.00Axle Security Pin Pkg/50 033022 42.00 Ã Ã Ã ÃAxle Security Pin Pkg/10 090007 11.50 Ã Ã Ã ÃDog Screw Pkg/2 090004 15.00 Ã Ã Ã ÃDog Screw Pkg/10 090083 57.00 Ã Ã Ã Ã227 Dog Key 5/32" Pkg/2 090005 14.00 Ã Ã Ã Ã227 Dog Key 5/32" Pkg/10 090085 55.00 Ã Ã Ã ÃLever Arm Axles Pkg/2 090006 25.00 Ã Ã Ã ÃLever Arm Axles Pkg/10 090082 112.00 Ã Ã Ã ÃWedgetite Screw Pkg/2 090008 7.50 Ã Ã Ã ÃWedgetite Screws Pkg/30 090081 40.00 Ã Ã Ã ÃCrossbar Tube Attaching Wedge Pkg/2 090020 9.50 Ã Ã Ã ÃCrossbar Tube Attaching Ring Pkg/2 090021 11.50 Ã Ã Ã Ã88 Lever Arm Axle/Wedgetite Package 103865 54.00 Ã Ã Ã Ã

103




List Price



US3, US26, SPBLK

Vertical Latches8827 LR Top Latch Kit Less Cover 050460 158.00 Ã Ã Ã Ã8827 LR Bottom Latch Kit Less Cover 050461 158.00 Ã Ã Ã Ã8827-F Top Latch Kit Less Cover 050462 181.00 Ã Ã Ã Ã8827-F Bottom Latch Kit Less Cover 050463 181.00 Ã Ã Ã Ã8827 PL Top Latch Kit Less Cover 050471 105.00 Ã Ã Ã Ã8827 PL Bottom Latch Kit Less Cover 050472 105.00 Ã Ã Ã Ã8827-F/47-F Soffit Latch Kit 114141 157.00 Ã Ã Ã Ã

8827 LR Top Latch Kit w/Cover 050466 Ã 233.00 240.00 233.00 250.008827 LR Bottom Latch Kit w/Cover 050467 Ã 233.00 240.00 233.00 250.008827-F Top Latch Kit w/Cover 050468 Ã 286.00 296.00 281.00 322.008827-F Bottom Latch Kit w/Cover 050469 Ã 286.00 296.00 281.00 322.008827 PL Top Latch Kit w/Cover 050473 Ã 181.00 186.00 175.00 215.008827 PL Bottom Latch Kit w/Cover 050479 Ã 181.00 186.00 175.00 215.008827-F Flush Transom Latch Kit w/Cover 050480 Ã 296.00 319.00 296.00 331.00

8827 Latch Cover Kit 050464 Ã 64.00 71.00 64.00 84.008827-F Top Latch Cover Kit 050465 Ã 100.00 105.00 95.00 134.008827-F Flush Transom Latch Cover Kit 050481 Ã 140.00 146.00 140.00 157.00

8827 Latch Special Chassis Nut 050277 9.50 Ã Ã Ã Ã8847-F Release Guide Cover w/Screws 050278 - 156.00 156.00 156.00 211.008827 LR Top Rod Connector 050279 11.50 Ã Ã Ã Ã8827 LR Bottom Rod Connector 050327 11.50 Ã Ã Ã Ã8827 Chassis Tie Rod 050328 9.50 Ã Ã Ã Ã8827-F Special Chassis Hex Stud 050478 9.50 Ã Ã Ã Ã8827-F Plunger Release Bracket 107765 - 56.00 56.00 48.00 56.008827 Latch Case Mounting Package 900501 7.50 Ã Ã Ã Ã8827/47-F Soffit Latch Mounting Package 900502 7.50 Ã Ã Ã Ã8847-F Plunger Release Bracket Package 900576 Ã 63.00 63.00 63.00 63.008847-F Flush Transom Release Brkt Pkg 900614 Ã 93.00 93.00 93.00 93.008827 Latch Case Cover Screw Package 900850 Ã 9.50 9.50 9.50 9.508827-F Flush Transom Latch Screw Pkg 900852 Ã 25.00 25.00 25.00 25.00

104




List Price


Finished US26D US10B US10 US4US3, US26,

SPBLK

Vertical Rods8827 Top Rod Kit 050453 Ã 84.00 84.00 97.00 84.00 107.008827-F Top Rod Kit 050454 Ã 84.00 84.00 97.00 84.00 107.008827 Bottom Rod Kit 050455 Ã 84.00 84.00 97.00 84.00 107.008827-F Bottom Rod Kit 050456 Ã 84.00 84.00 97.00 84.00 107.008847-F Top Rod Kit - 6'8"-8' Door 050457 Ã 303.00 303.00 303.00 303.00 303.008847-F Bottom Rod Kit 050458 303.00 Ã Ã Ã Ã Ã8827 One Piece Top Rod - 8' 050662 Ã 103.00 147.00 160.00 129.00 319.008827-F One Piece Top Rod - 8' 050663 Ã 103.00 147.00 160.00 129.00 319.00

8827 12" Extension Rod Kit 051701 Ã 22.00 22.00 22.00 22.00 22.008827 24" Extension Rod Kit 051703 Ã 22.00 22.00 22.00 22.00 22.008827 36" Extension Rod Kit 050660 Ã 68.00 105.00 77.00 65.00 235.008827 48" Extension Rod Kit 050661 Ã 80.00 116.00 93.00 77.00 247.008847-F Extension Rod Kit - 8'-10' Door 051705 22.00 Ã Ã Ã Ã Ã8847-F Extension Rod Kit - 10'-12' Door 050634 155.00 Ã Ã Ã Ã Ã8847-F Extension Rod Kit - 12'-14' Door 050635 155.00 Ã Ã Ã Ã Ã8847-F Extension Rod Kit - 14'-16' Door 050636 155.00 Ã Ã Ã Ã Ã8827 Extension Rod Coupling 050093 11.50 Ã Ã Ã Ã Ã

8827 Rod Guide Kit 050482 Ã 61.00 61.00 62.00 60.00 62.008827/27-F Bottom Rod Roll Pin Pkg/10 090010 10.50 Ã Ã Ã Ã Ã8847/47-F Rod Connector Rivet Pkg/10 090011 7.50 Ã Ã Ã Ã Ã8847-F Rod Guide Mtg. Screws Pkg/10 090018 7.50 Ã Ã Ã Ã Ã8847-F Bottom Guide Package 100741 64.00 Ã Ã Ã Ã Ã8847-F Rod Guide Kit 105140 17.00 Ã Ã Ã Ã Ã8827 Rod Guide Mounting Package 900534 Ã 10.00 10.00 14.00 10.00 14.008847-F Rod Set Mounting Package 900541 7.50 Ã Ã Ã Ã Ã

105



98/99 SeriesList Price


Finished

US28, 313, 315 US26D �US32D US10 US4

US3, �US15,

US26

Center Case 98/99 Rim Center Case Kit Less Cover 050020 348.00 Ã Ã Ã Ã Ã Ã98/99-F Rim Center Case Kit Less Cover 050026 364.00 Ã Ã Ã Ã Ã Ã98/9927/-F Center Case Kit Less Cover 050021 188.00 Ã Ã Ã Ã Ã Ã98/9947/48/-F Center Case Kit Less Cover 050022 483.00 Ã Ã Ã Ã Ã Ã98/9975/-F Center Case Kit Less Cover 050023 135.00 Ã Ã Ã Ã Ã Ã98/99-2 RHR Center Case Kit Less Cover 050024 598.00 Ã Ã Ã Ã Ã Ã98/99-2 LHR Center Case Kit Less Cover 050025 598.00 Ã Ã Ã Ã Ã Ã98/99-F-2 RHR Center Case Kit Less Cover 050027 607.00 Ã Ã Ã Ã Ã Ã98/99-F-2 LHR Center Case Kit Less Cover 050028 607.00 Ã Ã Ã Ã Ã Ã98/9975-2 RHR Center Case Kit Less Cover 050029 233.00 Ã Ã Ã Ã Ã Ã98/9975-2 LHR Center Case Kit Less Cover 050030 233.00 Ã Ã Ã Ã Ã ÃSD98/99/9957 RHR Rim Center Case Kit Less Cover 050548 583.00 Ã Ã Ã Ã Ã ÃSD98/99/9957 LHR Rim Center Case Kit Less Cover 050549 583.00 Ã Ã Ã Ã Ã ÃSD98/9927 RHR Center Case Kit Less Cover 050550 428.00 Ã Ã Ã Ã Ã ÃSD98/9927 LHR Center Case Kit Less Cover 050551 428.00 Ã Ã Ã Ã Ã ÃSD98/9947/48/49 RHR Center Case Kit Less Cover 050552 598.00 Ã Ã Ã Ã Ã ÃSD98/9947/48/49 LHR Center Case Kit Less Cover 050553 598.00 Ã Ã Ã Ã Ã Ã

SD98/99 Rim Conversion Kit RHR 050386 Ã 841.00 886.00 919.00 919.00 886.00 929.00SD98/99 Rim Conversion Kit LHR 050387 Ã 841.00 886.00 919.00 919.00 886.00 929.0098/99-2 Conversion Kit RHR 050388 Ã 841.00 886.00 919.00 919.00 886.00 929.0098/99-2 Conversion Kit LHR 050389 Ã 841.00 886.00 919.00 919.00 886.00 929.0098/99-2S1 Conversion Kit RHR 051883 Ã 1034.00 1078.00 1112.00 1112.00 1078.00 1121.0098/99-2S1 Conversion Kit LHR 051884 Ã 1034.00 1078.00 1112.00 1112.00 1078.00 1121.00

98/99/-F Center Case Cover Kit 050071 Ã 110.00 158.00 165.00 158.00 158.00 181.0098/9927/27-F Center Case Cover Kit 050072 Ã 110.00 158.00 165.00 158.00 158.00 181.0098/9947/47/49/75/75-F Center Case Cover Kit 050073 Ã 110.00 158.00 165.00 158.00 158.00 181.0098/9957/-F Center Case Cover Kit 050554 Ã 110.00 158.00 165.00 158.00 158.00 181.0098/99-2/SD RHR Center Case Cover Kit 050555 Ã 142.00 165.00 186.00 165.00 165.00 198.0098/99-2/SD LHR Center Case Cover Kit 050556 Ã 142.00 165.00 186.00 165.00 165.00 198.0098/9975-2 RHR Center Case Cover Kit 050557 Ã 142.00 165.00 186.00 165.00 165.00 198.0098/9975-2 LHR Center Case Cover Kit 050558 Ã 142.00 165.00 186.00 165.00 165.00 198.00CX-CD/SD98/9927 RHR Center Case Cover Kit 050559 Ã 142.00 165.00 186.00 165.00 165.00 198.00CX-CD/SD98/9927 LHR Center Case Cover Kit 050560 Ã 142.00 165.00 186.00 165.00 165.00 198.00CX-CD/SD98/9947 RHR Center Case Cover Kit 050562 Ã 142.00 165.00 186.00 165.00 165.00 198.00CX-CD/SD98/9947 LHR Center Case Cover Kit 050563 Ã 142.00 165.00 186.00 165.00 165.00 198.00

Control Link Pin Kit (w/Retaining Ring) 050529 9.50 Ã Ã Ã Ã Ã ÃControl Link Pin Retaining Ring Pkg/10 090107 9.50 Ã Ã Ã Ã Ã ÃControl Link Pin Pkg/10 090031 11.50 Ã Ã Ã Ã Ã ÃNL Drive Screw Pkg/10 090074 14.00 Ã Ã Ã Ã Ã ÃLatchbolt Pin Pkg/10 090079 9.50 Ã Ã Ã Ã Ã ÃCenter Case Cover Bracket 050564 11.50 Ã Ã Ã Ã Ã ÃCenter Case Reinforcing Bracket 050565 11.50 Ã Ã Ã Ã Ã ÃCD-CX/SD Cylinder Dog Housing 112409 Ã 112.00 112.00 - 112.00 - 112.00CX-CD/SD Cylinder Dog Bracket Kit LHR 112456 61.00 Ã Ã Ã Ã Ã ÃCX-CD/SD Cylinder Dog Bracket Kit RHR 112455 61.00 Ã Ã Ã Ã Ã Ã98/99-2 Rim LHR Cylinder Adaptor 113098 Ã 105.00 105.00 105.00 105.00 105.00 105.0098/99-2 Rim RHR Cylinder Adaptor 113099 Ã 105.00 105.00 105.00 105.00 105.00 105.0098/9975-2 LHR Cylinder Adaptor 113100 Ã 165.00 165.00 165.00 165.00 165.00 165.00

For Antimicrobial Finishes add $6.00 to list. ��US32D AND US15 finishes available with Series 98 only.

106



Series 98/99 (continued)

List Price


Finished

US28, 313, 315 US26D �US32D US10 US4

US3, �US15,

US26

Center Case (continued) 98/99-2 Rim RHR Cylinder Adaptor 113099 Ã 165.00 165.00 165.00 165.00 165.00 165.00Center Case Cover Screws 900892 Ã 9.50 Ã 9.50 9.50 9.50 Ã

Cover Plate / Conversion Kits99 Hex Dog Conversion Kit fits 3' to 4' 050114 Ã 57.00 Ã Ã 57.00 57.00 57.0098 Hex Dog Conversion Kit fits 3' to 4' 050117 Ã 57.00 Ã 57.00 57.00 57.00 57.0099 CD Conversion Kit fits 3' to 4' 050115 Ã 75.00 Ã Ã 75.00 75.00 75.0098 CD Conversion Kit fits 3' to 4' 050132 Ã 75.00 Ã 75.00 75.00 75.00 75.0099 Fire or Less Dogging Cover Plate Kit fits 3' to 4' 050589 Ã 43.00 Ã Ã 35.00 35.00 35.0098 Fire or Less Dogging Cover Plate Kit fits 3' to 4' 050588 Ã 43.00 Ã 35.00 35.00 35.00 35.0099 ALK Cover Plate Kit fits 3' to 4' 050569 Ã 84.00 Ã Ã 83.00 83.00 83.0098 ALK Cover Plate Kit fits 3' to 4' 050570 Ã 84.00 Ã Ã 83.00 83.00 83.00CX99 Cover Plate Kit fits 3' to 4' 050572 Ã 84.00 Ã Ã 83.00 83.00 83.00CX98 Cover Plate Kit fits 3' to 4' 050573 Ã 84.00 Ã 83.00 83.00 83.00 83.0099 CI Kit 3' 050770 Ã 209.00 Ã Ã 209.00 209.00 209.0098 CI Kit 3' 050771 Ã 209.00 Ã 209.00 209.00 209.00 209.0099 CI Kit 4' 050772 Ã 209.00 Ã Ã 209.00 209.00 209.0098 CI Kit 4' 050773 Ã 209.00 Ã 209.00 209.00 209.00 209.0099 DI Kit 3' 050766 Ã 192.00 Ã Ã 192.00 192.00 192.0098 DI Kit 3' 050767 Ã 192.00 Ã 192.00 192.00 192.00 192.0099 DI Kit 4' 050768 Ã 192.00 Ã Ã 192.00 192.00 192.0098 DI Kit 4' 050769 Ã 192.00 Ã 192.00 192.00 192.00 192.0098/9947WDC Conversion Kit - Panic Only 050134 Ã 267.00 Ã 215.00 220.00 244.00 293.00

��US32D AND US15 finishes available with Series 98 only.

For Antimicrobial Finishes add $6.00 list

107



(continued) Series 98/99

List Price


Finished

US28, 313, 315 US26D �US32D US10 US4

US3, �US15,

US26

End Cap98/99 Impact Resistant End Cap Kit 050014 Ã 62.00 68.00 72.00 77.00 69.00 69.0098/99 Impact Resistant End Cap Scr Pkg 900597 Ã Ã 9.50 9.50 11.50 9.50 9.5098/99 Impact Resistant End Cap Bracket 050524 8.50 Ã Ã Ã Ã Ã Ã

Push Bar * 98/99 Push Bar Retrofit Kit - 3' Dr See Note Ã 161.00 188.00 288.00 258.00 251.00 295.00 * 98/99 Push Bar Retrofit Kit - 4' Dr See Note Ã 172.00 207.00 300.00 271.00 258.00 306.00

98/99 Push Bar Guide Pkg/10 090049 10.50 Ã Ã Ã Ã Ã Ã

* To order, specify device type, size, finish. Example: PBKIT 99 3' US28

Mechanism Case Part. No.Non-

Finished

313, 315,

US28 US26D �US32D US10 US4

US3, �US15,

US2699 Series Mechanism Case - 3' Door 968144 Ã 112.00 Ã Ã 139.00 139.00 159.0099 Series Mechanism Case - 4' Door 968146 Ã 159.00 Ã Ã 183.00 183.00 206.0098 Series Mechanism Case - 3' Door 970191 Ã 112.00 Ã 145.00 139.00 139.00 159.0098 Series Mechanism Case - 4' Door 970192 Ã 159.00 Ã 194.00 183.00 183.00 206.00CD/SS Cylinder Mtg Kit 107813 Ã Ã 45.00 Ã 48.00 48.00 54.00CD/SS Cylinder Locating Washer Pkg 050490 11.50 Ã Ã Ã Ã Ã ÃCD/SS Mortise Cylinder Collar Pkg 050525 Ã Ã 35.00 Ã 38.00 35.00 41.00CD/SS Cylinder Lock Nut Pkg 050526 10.50 Ã Ã Ã Ã Ã ÃCD Actuator Pkg/2 090045 9.50 Ã Ã Ã Ã Ã ÃCD Dogging Plug Pkg/2 090046 8.50 Ã Ã Ã Ã Ã Ã227 Dog Key 5/32" Pkg/10 090085 55.00 Ã Ã Ã Ã Ã ÃMechanism Case Brkt Screw Pkg/10 090073 7.50 Ã Ã Ã Ã Ã Ã98/99 Rim/75 Mtg. Pkg. 1-3/4"-2 1/4" Dr 900561 9.50 Ã Ã Ã Ã Ã Ã98/9927/27-F Mtg. Pkg 1-3/4" Door 900563 9.50 Ã Ã Ã Ã Ã Ã98/9927/27-F Mtg. Pkg 2-1/4" Door 900568 9.50 Ã Ã Ã Ã Ã Ã


For Antimicrobial Finishes add $6.00 list

108




Description Part. No.

List Price Non-

Finished

BaseplateShock Absorber Pkg 050491 24.00Baseplate Screw Pkg/10 090037 8.50Baseplate Bumper Pkg/4 090038 8.50Baseplate Return Spring Pkg/10 090039 9.50Hex Dogging Shaft Pkg/2 090040 9.50Dogging Spring Pkg/2 090041 8.50Dogging Adaptor Spring Pkg/2 090042 11.50Dogging Adaptor Pkg/2 090043 9.50Dogging Hook Pkg/2 090044 9.50Baseplate Bearing Strip Pkg/2 090048 9.50227 Dog Key 5/32" Pkg/2 090005 14.00227 Dog Key 5/32" Pkg/10 090085 55.0098/9927-F LBR Latch Spring Pkg/10 090088 15.00

EL Dogging Rod Kit - 3' 050531 45.00EL Dogging Rod Kit - 4' 050532 45.00EL 6' Cable and Connector 110388 36.00EL Potted Circuit Breaker 050534 235.00EL Solenoid/Plunger 050535 259.00HD-EL Solenoid 050536 259.00HD-EL Solenoid Plunger 050537 96.00EL Dogging Rod Retainer 050538 10.50EL Receptacle Connector 050539 9.50EL Female Terminal 050540 9.50HD-EL Dog Screw 050541 11.50HD-EL Solenoid Bracket 050542 20.00HD-EL Dogging Spring 050543 11.50

SS Cable 050544 105.00SS Housing 050545 349.00

Chexit PCB Kit - 15 second release 050228 823.00

CX99-RCM Kit Less Module 050375 213.00CX98-RCM Kit Less Module 050376 213.00

CX Solenoid & Plunger 050533 242.00Chexit Wiring Assembly 112018 157.00Sign 15 Second - Chexit/DE5101 113781 46.00Sign 30 Second - Chexit/DE5101 113782 49.00LED Cover Mask - Chexit 970513 9.50LED Cover - Chexit 970519 20.00

109



(continued) Series 98/99

List Price


Finished US28 US26D �US32D313 315

US4, US10

US3, �US15,

US26

Vertical Latches* 98/9927/98/9957 Top Latch Retrofit Kit W/SNB 050091 Ã 112.00 112.00 112.00 112.00 112.00 112.00* 98/9927/98/9957 Bottom Latch Retrofit Kit W/SNB 050090 Ã 112.00 112.00 112.00 112.00 112.00 112.00

98/9927/98/9957 Top Latch Kit Less Cover 050400 112.00 Ã Ã Ã Ã Ã Ã98/9927/98/9957 Bottom Latch Kit Less Cover 050401 112.00 Ã Ã Ã Ã Ã Ã98/9927/98/9957 Pullman Latch Kit Less Cover 050402 112.00 Ã Ã Ã Ã Ã Ã

98/9947 Top Latch Kit 050492 217.00 Ã Ã Ã Ã Ã Ã98/9947 Bottom Latch Kit 050493 176.00 Ã Ã Ã Ã Ã ÃES98/9947 Top Latch Kit 050128 159.00 Ã Ã Ã Ã Ã Ã

** 98/9948 Top Latch Kit - (non EL) 050494 317.00 Ã Ã Ã Ã Ã Ã** EL98/9948 Top Latch Kit 050516 300.00 Ã Ã Ã Ã Ã Ã** 98/9948 Bottom Latch Kit 050495 341.00 Ã Ã Ã Ã Ã Ã

98/9948 Latch Retrofit Kit - (non EL) 050047 532.00 Ã Ã Ã Ã Ã Ã98/9948-F Latch Retrofit Kit - (non EL) 050048 532.00 Ã Ã Ã Ã Ã ÃEL98/9948 Latch Retrofit Kit 050522 532.00 Ã Ã Ã Ã Ã ÃEL98/9948-F Latch Retrofit Kit 050523 532.00 Ã Ã Ã Ã Ã Ã

98/9927/98/9957/27-F Latch Case Cover Kit 050566 Ã 41.00 54.00 Ã 41.00 48.00 57.0098/9927/98/9957/27-F Latch Cover Screw Pkg. 900850 Ã Ã 9.50 9.50 9.50 9.50 9.50

98/9927/98/9957 Top Latch Compression Spring Pkg/10 090056 9.50 Ã Ã Ã Ã Ã Ã98/9927/98/9957 Top Latch Spring Pkg/10 090057 9.50 Ã Ã Ã Ã Ã Ã98/9927/98/9957 Bolt Return Spring Pkg/10 090065 9.50 Ã Ã Ã Ã Ã Ã98/9927/98/9957 Top Latch Aux. Bolt Spring Pkg/10 090076 9.50 Ã Ã Ã Ã Ã ÃLBR Fire Latch/Strike Kit 050171 354.00 Ã Ã Ã Ã Ã Ã98/9927/98/9957-F AFL Strike Hole Plug 050509 8.50 Ã Ã Ã Ã Ã Ã98/9927/98/9957 Latch Mtg Bracket Kit 050546 22.00 Ã Ã Ã Ã Ã Ã98/9927/98/9957 Latch Screw Pkg 900589 9.50 Ã Ã Ã Ã Ã Ã98/9927/98/9957-F LBR Latch Mounting Package 900980 8.50 Ã Ã Ã Ã Ã Ã

98/9947 Latch Mounting Bracket Kit 109324 43.00 Ã Ã Ã Ã Ã Ã** 98/9948 Latch Mounting Bracket Kit 112868 48.00 Ã Ã Ã Ã Ã Ã

98/9947 Latch Brkt Mtg. Screw (Latch) Pkg/6 090059 9.50 Ã Ã Ã Ã Ã Ã98/9947 Latch Brkt Mtg. Screw (Door) Pkg/6 090061 9.50 Ã Ã Ã Ã Ã Ã98/9947/48 Latch Linkage Pin Retaining Ring Pkg/10 090063 9.50 Ã Ã Ã Ã Ã Ã98/9947 Latch Link Pin Pkg/10 090064 9.50 Ã Ã Ã Ã Ã Ã98/9947 Bolt Return Spring Pkg/10 090065 9.50 Ã Ã Ã Ã Ã Ã98/9947 Top Latch Compression Spring Pkg/10 090066 8.50 Ã Ã Ã Ã Ã Ã98/9947WDC/WDC-F Auxiliary Mtg. Package 900856 9.50 Ã Ã Ã Ã Ã Ã

* For Devices shipped before October, 1998 ** For service replacement only. Refer to Retrofit Kits 050047, 050048, 050522 and 050523 to convert 98/9947 Device to 98/9948.


110



List Price


Finished US28 US26D �US32D 313 315 US10 US4

US3, �US15,

US26

Vertical Rods9927/9957 Top Rod Kit 050512 Ã 61.00 Ã Ã 71.00 84.00 84.00 84.00 84.009827/9857 Top Rod Kit 050513 Ã 61.00 Ã 71.00 71.00 84.00 84.00 84.00 84.009927/9957 Bottom Rod Kit 050514 Ã 61.00 Ã Ã 71.00 84.00 84.00 84.00 84.009827/9857 Bottom Rod Kit 050515 Ã 61.00 Ã 71.00 71.00 84.00 84.00 84.00 84.0098/9947/48 Adj. Top Rod Kit - 6'8"-8'4" Dr 050574 71.00 Ã Ã Ã Ã Ã Ã Ã Ã98/9947/48 Bottom Rod Kit 050575 71.00 Ã Ã Ã Ã Ã Ã Ã Ã98/9947WDC Top Rod - 6'8"-8'4" Dr 050582 122.00 Ã Ã Ã Ã Ã Ã Ã Ã98/9947WDC Bottom Rod 050583 122.00 Ã Ã Ã Ã Ã Ã Ã Ã9927/9957 One Piece Top Rod Kit - 8' 050650 Ã Ã 179.00 Ã 179.00 179.00 114.00 90.00 179.009927/9957 One Piece Top Rod Kit - 10' 050651 Ã Ã 198.00 Ã 198.00 193.00 124.00 110.00 193.009927/9957 One Piece Top Rod Kit - 12' 050652 Ã Ã 209.00 Ã 209.00 217.00 138.00 129.00 217.009827/9857 One Piece Top Rod Kit - 8' 050653 Ã Ã 179.00 179.00 179.00 179.00 114.00 90.00 179.009827/9857 One Piece Top Rod Kit - 10' 050654 Ã Ã 198.00 198.00 198.00 193.00 124.00 110.00 193.009827/9857 One Piece Top Rod Kit - 12' 050655 Ã Ã 209.00 209.00 209.00 217.00 138.00 129.00 217.00

9927/9957 Extension Rod 12" Kit 051801 Ã 22.00 Ã Ã 22.00 22.00 22.00 22.00 22.009827/9857 Extension Rod 12" Kit 051809 Ã 22.00 Ã 22.00 22.00 22.00 22.00 22.00 22.009927/9957 Extension Rod 36" Kit 051802 Ã 26.00 26.00 Ã 26.00 26.00 26.00 26.00 26.009827/9857 Extension Rod 36" Kit 051810 Ã 26.00 26.00 26.00 26.00 26.00 26.00 26.00 26.009927/9957 Extension Rod 60" Kit 050642 Ã 108.00 108.00 Ã 108.00 209.00 199.00 132.00 209.009827/9857 Extension Rod 60" Kit 050644 Ã 108.00 108.00 108.00 108.00 209.00 199.00 132.00 209.00

98/9947/48 Extension Rod Kit - Adj 8'4"-10' 051808 22.00 Ã Ã Ã Ã Ã Ã Ã Ã98/9947/48 Extension Rod Kit - Adj 10'-11'8 050622 74.00 Ã Ã Ã Ã Ã Ã Ã Ã98/9947/48 Extension Rod Kit - Adj 11'8-13'4 050623 74.00 Ã Ã Ã Ã Ã Ã Ã Ã98/9947/48 Extension Rod Kit - Adj 13'4-15' 050624 84.00 Ã Ã Ã Ã Ã Ã Ã Ã

98/9927/98/9957-F Rod Guide Assembly 112063 Ã 40.00 48.00 48.00 40.00 40.00 63.00 63.00 97.0098/9927/98/9957-F Rod Guide Mtg. Package 900919 Ã Ã 9.50 9.50 9.50 9.50 9.50 9.50 9.5098/9927/98/9957 Rod Roll Pin Pkg/10 090054 10.50 Ã Ã Ã Ã Ã Ã Ã Ã98/9927/98/9957 Rod Connector-Latch Pkg/2 090067 14.00 Ã Ã Ã Ã Ã Ã Ã Ã98/9927/98/9957 Rod Connector-C/Case Pkg/2 090068 14.00 Ã Ã Ã Ã Ã Ã Ã Ã98/9927/98/9957 Top or Bottom Rod Connector 050547 7.50 Ã Ã Ã Ã Ã Ã Ã Ã

* 98/9947 Rod Connecting Screw Pkg/2 090071 11.50 Ã Ã Ã Ã Ã Ã Ã Ã98/9948 Rod Connecting Screw Pkg/2 090072 11.50 Ã Ã Ã Ã Ã Ã Ã Ã98/9927/98/9957 Rod Extension Connector Pkg/4 090075 10.50 Ã Ã Ã Ã Ã Ã Ã Ã

98/9947 Ratchet Release Kit 106222 Ã 105.00 Ã 105.00 105.00 105.00 105.00 105.00 Ã98/9947 Ratchet Release Spacer 1/8" 970978 Ã 15.00 Ã 15.00 15.00 Ã 15.00 15.00 Ã98/9947 Ratchet Lever Spring Pkg/2 090069 8.50 Ã Ã Ã Ã Ã Ã Ã Ã98/9947 Ratchet Release Screw Pkg/2 090070 11.50 Ã Ã Ã Ã Ã Ã Ã Ã98/9947 Rod Adjusting Package 900620 15.00 Ã Ã Ã Ã Ã Ã Ã Ã98/9947 Adjusting Screw LBR Package 900898 9.50 Ã Ã Ã Ã Ã Ã Ã Ã98/9947WDC Scalp Plate 050088 Ã Ã Ã 32.00 49.00 49.00 49.00 49.00 96.00

* For Devices shipped after July, 1997



111



Description Part No.List

Price

Vertical Latches49 Top Latch Assembly 24090110 205.0049 Bottom Latch Assembly 24090128 222.00

Centerslide Kits98/9949 Centerslide Kit 24090144 315.0098/9949 WDC Centerslide Kit 24090151 417.00

49 Cable AssembliesTop Cable Assembly Door Openings from 6'8" up to 8'4" - specify height

Door Openings from 8'5" up to 10'0" - specify height179.00197.00

Bottom Cable Assembly Door Openings from 6'8" up to 8'4" - specify heightDoor Openings from 8'5" up to 10'0" - specify height

184.00205.00

WDC Top Cable Assembly Door Openings from 6'8" up to 8'4" - specify heightDoor Openings from 8'5" up to 10'0" - specify height

208.00216.00

WDC Bottom Cable Assembly (Includes 2 Cables)

Door Openings from 6'8" up to 8'4" - specify heightDoor Openings from 8'5" up to 10'0" - specify height

237.00260.00

Note: Door Opening Heights must be specified when ordering cable assemblies.For door opening heights over 10', consult factory for pricing and lead time.* For Complete 49 Cable System kits, see Page 55.

Mounting Packages49 Bottom Mounting Package 23946437 87.0049 Top Mounting Package 23946429 78.0098/9949 HM/AL Centerslide Mounting Package

23946445 87.00

98/9949WDC Centerslide Mounting Package

24010902 134.00

Misc.Cable Removal Tool - qty 1 24052979 11.50Cable Removal Tool - Pkg/10 24090706 94.00338 Filler Plate 24230914 70.00

Series 98/9949

112



List Price


Finished

US28, SP313, US19 US26D US32D US10 US4

US3, US15, US26

Center CaseXP98/99R Center Case Kit Less Cover 050689 386.00 Ã Ã Ã Ã Ã ÃXP98/99R/-F Center Case Kit Less Cover 050690 401.00 Ã Ã Ã Ã Ã ÃXP98/99/-F Center Case Cover Kit 050691 Ã Ã 158.00 165.00 158.00 158.00 181.00

Retrofit KitsXP99-909 050676 - 723.00 750.00 777.00 744.00 744.00 825.00XP99-954 050675 - 805.00 830.00 858.00 825.00 825.00 889.00

US32D AND US15 finishes available with XP98 only.

Series XP98/99

113




Finished

Center Case94/9547/48/75 Center Case CASE.107 182.00Control Link Pin Kit (w/Retaining Ring) 050585 8.50Control Link Pin Retaining Ring Pkg/10 090107 9.50Main Control Link 971712 11.50

List Price


Finished US19 US28 US26D 313AN US10 US4US3,

US26

Mechanism Case94/9547/48/75 End Cap Package ECAP.115 Ã 75.00 Ã Ã Ã Ã Ã ÃINPACT Device Mounting Package PKGMTG.1001 25.00 Ã Ã Ã Ã Ã Ã Ã9547/48/75-F Pushpad 971655 Ã Ã Ã Ã Ã Ã Ã 249.009447/48/75-F Pushpad 971656 Ã Ã Ã Ã Ã Ã Ã 249.00Dogging Clip 971659 30.00 Ã Ã Ã Ã Ã Ã ÃDogging Clip Spring 971664 9.50 Ã Ã Ã Ã Ã Ã Ã9547/48/75 Pushpad 971763 Ã Ã 186.00 210.00 201.00 230.00 222.00 Ã9447/48/75 Pushpad 971764 Ã Ã 186.00 210.00 201.00 230.00 222.00 Ã9547/48-F/75-F Pushpad 971765 Ã Ã 186.00 210.00 201.00 230.00 222.00 Ã9447/48-F/75-F Pushpad 971766 Ã Ã 186.00 210.00 201.00 230.00 222.00 ÃBaseplate Link Pin 971706 11.50 Ã Ã Ã Ã Ã Ã Ã9547/48/75 Pushpad 971709 Ã Ã Ã Ã Ã Ã Ã 249.009447/48/75 Pushpad 971710 Ã Ã Ã Ã Ã Ã Ã 249.00

List Price


Finished US28 313AN US10 US4

Vertical Rod and Latches94/9547/-F Rod Adjustment Kit KIT.1001 23.00 Ã Ã Ã Ã94/9547/-F Rod Adj. Kit - LBR KIT.1002 14.00 Ã Ã Ã Ã94/9547/-F Top Rod Kit RODASY.121 71.00 Ã Ã Ã Ã94/9547/-F Bottom Rod Kit RODASY.122 71.00 Ã Ã Ã Ã94/9547/-F Extension Rod Kit 051808 22.00 Ã Ã Ã Ã94/9547/-F Top Latch Kit 050492 217.00 Ã Ã Ã Ã94/9547/-F Bottom Latch Kit 050493 176.00 Ã Ã Ã Ã94/9547/-F Ratchet Release Kit 106222 Ã 105.00 105.00 105.00 105.0094/9547/-F Latch Mtg. Bracket Kit 109324 43.00 Ã Ã Ã Ã

INPACT Device Series 94/95n

114



7500 Mortise LockList Price


Finished US32D

US4, US10B,

US19 US10 US3 US32 * E7500 Solenoid Replacement Kit 12VDC FSE 050212 187.00 Ã Ã Ã Ã Ã * E7500 Solenoid Replacement Kit 12VDC FS 050213 187.00 Ã Ã Ã Ã Ã * E7500 Solenoid Replacement Kit 24VDC FSE 050214 187.00 Ã Ã Ã Ã Ã * E7500 Solenoid Replacement Kit 24VDC FS 050215 187.00 Ã Ã Ã Ã Ã

E/SS7500 Female Terminal 050540 9.50 Ã Ã Ã Ã Ã7500 Auxiliary Bolt Link Sub-Assembly 109347 31.00 Ã Ã Ã Ã ÃSS7500 Wire Harness Switch Sub-Assembly 114294 80.00 Ã Ã Ã Ã Ã7500 Latchbolt and Faceplate Sub-Assembly 109773 55.00 Ã Ã Ã Ã ÃE7500 Switch Connector Assembly 110744 99.00 Ã Ã Ã Ã Ã7500-2 Cylinder Plug Assembly 111943 145.00 Ã Ã Ã Ã Ã7500 Lock Mounting Pkg 900532 Ã 9.50 9.50 9.50 9.50 Ã7500 Scalp Plate - 8-32 x 3/8" FPHMS 963080 Ã 9.50 9.50 9.50 9.50 Ã7500 Hsg. Cover - 8-32 x 3/8" UFPHMS 964330 9.50 Ã Ã Ã Ã Ã7500 Housing 8-32 x 3/8" PPH TF 964390 5.50 Ã Ã Ã Ã Ã7500 Cyl. Set - 8-32 x 2" Fill SHMS 963954 9.50 Ã Ã Ã Ã Ã#8 SAE Flat Washer 963984 9.50 Ã Ã Ã Ã ÃE7500 FSE Roll Pin - 3/32 x 9/16" 964035 9.50 Ã Ã Ã Ã Ã7500 Auxiliary Bolt 968668 40.00 Ã Ã Ã Ã Ã7500 Deadlocking Spring 968748 9.50 Ã Ã Ã Ã Ã7500 Trim Bolt Retractor 968761 9.50 Ã Ã Ã Ã Ã

7500 Thumb Latch Lift 968763 9.50 Ã Ã Ã Ã Ã7500 Knob Cam 968765 32.00 Ã Ã Ã Ã Ã7500 Scalp Plate 968766 Ã 98.00 Ã Ã Ã 149.00E/SS7500 Switch Insulator 968770 9.50 Ã Ã Ã Ã Ã7500 Deadlock Release Arm 968773 22.00 Ã Ã Ã Ã Ã7500 Auxiliary Bolt Spring 968935 9.50 Ã Ã Ã Ã Ã7500 Latchbolt Collar 968939 21.00 Ã Ã Ã Ã Ã7500 Latch Return Spring 969089 9.50 Ã Ã Ã Ã ÃE7500 FSE Torsion Spring 969107 9.50 Ã Ã Ã Ã Ã7500 Trim Lock Slide Spring 969364 9.50 Ã Ã Ã Ã Ã7500 Latch Return Spring Guide 969610 9.50 Ã Ã Ã Ã Ã7500 Trim Lock Spring Guide 970188 9.50 Ã Ã Ã Ã Ã7500 Crossbar Input Arm 970318 21.00 Ã Ã Ã Ã ÃE7500 FS Trim Lock Slide Spring 970546 9.50 Ã Ã Ã Ã Ã7500 Stem Support 970735 9.50 Ã Ã Ã Ã ÃE7500 Lever Screw 970861 11.50 Ã Ã Ã Ã ÃE7500 Lever Spacer 970862 9.50 Ã Ã Ã Ã ÃE7500 FS Trim Lock Lever 972549 10.50 Ã Ã Ã Ã Ã7500 Scalp Plate 970872 Ã Ã 102.00 102.00 149.00 Ã

E7500 Solenoid Spring 971320 8.50 Ã Ã Ã Ã Ã7500 Housing Cover 971822 38.00 Ã Ã Ã Ã Ã

*For Mortise Lock shipped after 1992. For Mortise Locks shipped before 1992, entire Lock must be replaced

115



Controls Series 360/370 List Price

Description Model Part. No.Non-


US3, �US15,US26,SPBLK

US32US32D

Rod Member Kit 1 3/4" Door 371 109126 93.00 Ã Ã Ã ÃRod Member Kit 2 1/4" Door 371 109127 93.00 Ã Ã Ã ÃRod Member Kit 1 3/4" Door 377 109132 Ã 112.00 112.00 131.00 149.00Rod Member Kit 2 1/4" Door 377 109133 Ã 112.00 112.00 131.00 149.00Rod Member Kit 1 3/4" Door 374 109366 Ã 156.00 156.00 156.00 199.00Rod Member Kit 2 1/4" Door 374 109367 Ã 156.00 156.00 156.00 199.00Rod Member Kit 1 3/4" Door 376 109112 60.00 - - - -Rod Member Kit 2" Door 376 900582 - 110.00 110.00 110.00 110.00Rod Member Kit 2 1/4" Door 376 109115 110.00 Ã Ã Ã ÃRod Member Kit 1 3/4" - 2" Door 376WDC 900558 102.00 Ã Ã Ã ÃRod Member Kit 2 1/4" Door 376WDC 900559 149.00 Ã Ã Ã ÃRod Member Kit 1 3/4" Door 237 112843 84.00 Ã Ã Ã Ã

#01 Lever Kit 360 050001 - 165.00 165.00 186.00 226.00#02 Lever Kit 360 050002 Ã 165.00 165.00 186.00 226.00#03 Lever Kit 360 050003 Ã 165.00 165.00 186.00 226.00#05 Lever Kit 360 050008 Ã 165.00 165.00 186.00 226.00#06 Lever Kit 360 050006 Ã 165.00 165.00 186.00 226.00#07 Lever Kit 360 050007 Ã 165.00 165.00 186.00 226.00#12 Lever RHR Kit 360 050012 Ã 165.00 165.00 186.00 226.00#12 Lever LHR Kit 360 050013 Ã 165.00 165.00 186.00 226.00#16 Lever Kit 360 050009 Ã 165.00 165.00 186.00 226.00#17 Lever Kit 360 050017 Ã 165.00 165.00 186.00 226.00#18 Lever Kit 360 050010 Ã 165.00 165.00 186.00 226.00#01 Lever Kit 371/373/375/378 050750 Ã 165.00 165.00 186.00 226.00#01 DT Lever Kit 373/375 050751 Ã 165.00 165.00 186.00 226.00#02 Lever Kit 371/373/375/378 050752 Ã 165.00 165.00 186.00 226.00#02 DT Lever Kit 373/375 050753 Ã 165.00 165.00 186.00 226.00#03 Lever Kit 371/373/375/378 050754 Ã 165.00 165.00 186.00 226.00#03 DT Lever Kit 373/375 050755 Ã 165.00 165.00 186.00 226.00#06 Lever Kit 371/373/375/378 050756 Ã 165.00 165.00 186.00 226.00#06 DT Lever Kit 373/375 050757 Ã 165.00 165.00 186.00 226.00#07 Lever Kit 371/373/375/378 050758 Ã 165.00 165.00 186.00 226.00#07 DT Lever Kit 373/375 050759 Ã 165.00 165.00 186.00 226.00#17 Lever Kit 371/373/375/378 050760 Ã 165.00 165.00 186.00 226.00#17 DT Lever Kit 373/375 050761 Ã 165.00 165.00 186.00 226.00#12 Lever RHR Kit 371/373/375/378 050762 Ã 165.00 165.00 186.00 226.00#12 DT Lever RHR Kit 373/375 050763 Ã 165.00 165.00 186.00 226.00#12 Lever LHR Kit 371/373/375/378 050764 Ã 165.00 165.00 186.00 226.00#12 DT Lever LHR Kit 373/375 050765 Ã 165.00 165.00 186.00 226.00M51 Lever Kit 360 114810 Ã 232.00 232.00 232.00 232.00 ÃM51 Lever Kit 360 114812 Ã Ã Ã Ã Ã 232.00M52 Lever Kit 360 051920 Ã 232.00 232.00 232.00 232.00 ÃM52 Lever Kit 360 051922 Ã Ã Ã Ã Ã 232.00M53 Lever Kit 360 051928 Ã 232.00 232.00 232.00 232.00 ÃM53 Lever Kit 360 051930 Ã Ã Ã Ã Ã 232.00M54 Lever Kit 360 114826 Ã 232.00 232.00 232.00 232.00 ÃM54 Lever Kit 360 114828 Ã Ã Ã Ã Ã 232.00M55 Lever Kit 360 051936 Ã 232.00 232.00 232.00 232.00 ÃM55 Lever Kit 360 051938 Ã Ã Ã Ã Ã 232.00M56 Lever Kit 360 114822 Ã 232.00 232.00 232.00 232.00 ÃM56 Lever Kit 360 114824 Ã Ã Ã Ã Ã 232.00M57 Lever Kit 360 051914 Ã Ã Ã Ã Ã 232.00M61LH Lever Kit 360 114814 - 232.00 232.00 232.00 232.00 -M61LH Lever Kit 360 114816 - - - - - 232.00M61RH Lever Kit 360 114818 - 232.00 232.00 232.00 232.00 -M61RH Lever Kit 360 114820 - - - - - 232.00M62LH Lever Kit 360 051916 - - - - - 232.00M62RH Lever Kit 360 051918 - - - - - 232.00M63LH Lever Kit 360 114842 - 232.00 232.00 232.00 232.00 -M63LH Lever Kit 360 114844 - - - - - 232.00M63RH Lever Kit 360 114846 - 232.00 232.00 232.00 232.00 -M63RH Lever Kit 360 114848 - - - - - 232.00





US3, US26,SPBLK

NL Cylinder Plate 371/3/4/5/6/7/8 050599 11.50 Ã Ã Ã ÃTL Cylinder Plate 371/3/4/5/6/7/8 050600 11.50 Ã Ã Ã ÃCylinder Lock Nut & Washer 371/3/4/5/6/7/8 109111 15.00 Ã Ã Ã ÃCylinder Locknut 360 050526 10.50 Ã Ã Ã ÃCylinder Lock Pkg/2 371/3/4/5/6/7/8 090090 9.50 Ã Ã Ã ÃLever Adjustment Block 371/3/4/5/6/7/8 050576 9.50 Ã Ã Ã ÃLever Bushing 360L 050579 9.50 Ã Ã Ã ÃLever Bushing 371/373/375/378 050601 9.50 Ã Ã Ã ÃLever Control Spring LHR Pkg/4 371/373/375/378 090091 11.50 Ã Ã Ã ÃLever Control Spring RHR Pkg/4 371/373/375/378 090092 11.50 Ã Ã Ã ÃLever Return Spring Pkg/2 360L/L-BE 090093 11.50 Ã Ã Ã ÃLever Shaft Lock 371/373/375/378 050602 9.50 Ã Ã Ã ÃLever Stop Block 373/375 050603 9.50 Ã Ã Ã ÃMounting Stud Pkg/2 360 090094 9.50 Ã Ã Ã ÃMounting Stud Pkg/2 371/373/378 090095 9.50 Ã Ã Ã ÃMounting Stud Pkg/2 374/376/377 090096 9.50 Ã Ã Ã ÃCam - Input 360L/L-BE 050604 8.50 Ã Ã Ã ÃCam - Output 360 050605 25.00 Ã Ã Ã ÃCam - Vertical Rod 371/374/376/377 050606 22.00 Ã Ã Ã ÃCam Retaining Screw (Pkg/4) 371/373/375/378 090097 9.50 Ã Ã Ã ÃDogging Spring and Guide Kit 371/3/4/5/6/7/8 050607 9.50 Ã Ã Ã ÃLocking Member 360 050608 30.00 Ã Ã Ã ÃMortise Adaptor 373/375 050609 37.00 Ã Ã Ã ÃPin - Spirol 3/32 x 19/32 Pkg/4 373/375 090098 9.50 Ã Ã Ã ÃShear Pin Kit 360 050611 9.50 Ã Ã Ã ÃPine Tree Clip Pkg/10 360 090099 8.50 Ã Ã Ã ÃRub Plate 374/377 050612 Ã 60.00 63.00 63.00 63.00Short Arm Hex Wrench 1/8" 374/377 050613 10.50 Ã Ã Ã ÃShort Hex Key 3/32" 371/376 050614 9.50 Ã Ã Ã ÃSocket Set Screw 1/4-20 x 1/4 374/377 090100 9.50 Ã Ã Ã ÃSocket Set Screw 10-32 x 1/4 Pkg/10 360 090101 9.50 Ã Ã Ã ÃSpring - Locking Torsion 360 050615 6.50 Ã Ã Ã ÃTailpiece 360 050587 7.50 Ã Ã Ã ÃTailpiece Guide Pkg/10 360 050156 14.00 Ã Ã Ã ÃThumbturn Control Spring & Washer Kit 374/376/377 050616 11.50 Ã Ã Ã ÃThumbturn Sleeve 374/376/377 050619 32.00 Ã Ã Ã ÃWasher - Bearing 371/3/4/5/6/7/8 050621 22.00 Ã Ã Ã ÃWasher - Locking Pkg/10 371/373/375 090102 9.50 Ã Ã Ã ÃWasher - Wave Spring Pkg/10 360/371/373/375/378 090103 8.50 Ã Ã Ã ÃScrew Package 1 3/4" Dr 371/373/378 900807 Ã 15.00 15.00 15.00 15.00Screw Package 2 1/4" Dr 371/373/378 900808 Ã 22.00 22.00 22.00 22.00Screw Package 1 3/4" Dr 374/376/377 900809 Ã 15.00 15.00 15.00 15.00Screw Package 2 1/4" Dr 374/376/377 900810 Ã 22.00 22.00 22.00 22.00Screw Package 1 3/4" Dr 375 900883 Ã 15.00 15.00 15.00 15.00Screw Package 2 1/4" Dr 375 900884 Ã 22.00 22.00 22.00 22.00

M81 Lever Kit 360 051924 Ã 232.00 232.00 232.00 232.00 ÃM81 Lever Kit 360 051926 Ã Ã Ã Ã Ã 232.00M82 Lever Kit 360 051932 Ã 232.00 232.00 232.00 232.00 ÃM82 Lever Kit 360 051934 Ã Ã Ã Ã Ã 232.00M83 Lever Kit 360 114830 Ã 232.00 232.00 232.00 232.00 ÃM83 Lever Kit 360 114832 Ã Ã Ã Ã Ã 232.00M84 Lever Kit 360 114850 Ã 232.00 232.00 232.00 232.00 ÃM84 Lever Kit 360 114852 Ã Ã Ã Ã Ã 232.00M85LH Lever Kit 360 114834 Ã 232.00 232.00 232.00 232.00 ÃM85LH Lever Kit 360 114836 Ã Ã Ã Ã Ã 232.00M85RH Lever Kit 360 114838 Ã 232.00 232.00 232.00 232.00 ÃM85RH Lever Kit 360 114840 Ã Ã Ã Ã Ã 232.00

Thumbturn Kit 374/376/377 050592 - 153.00 153.00 153.00 235.00Thumbturn Kit 360 050593 - 153.00 153.00 153.00 235.00

Backplate 360 050595 14.00 Ã Ã Ã ÃBackplate LHR 371/3/4/5/6/7/8 050596 14.00 Ã Ã Ã ÃBackplate RHR 371/3/4/5/6/7/8 050597 14.00 Ã Ã Ã ÃBackplate - L-DT 373/375 050598 14.00 Ã Ã Ã Ã

� US15 finish available with Series 35 and 98 controls, only.



US3, �US15,US26,SPBLK

US32US32D

List Price

Controls Series 360/370 (continued)

117



Trims List Price


FinishedSP28, SP313

210/230 Series Trims230DT x 330/350 Screw Package 1 3/4" Dr 050140 Ã 11.50230DT x 330/350 Screw Package 2 1/4" Dr 050141 Ã 11.50

**230L Shearpin Replacement Kit Pkg/10 050148 28.00 Ã230L Cylinder Locknut 050526 10.50 Ã210K Bracket & Booster Assembly 109871 50.00 Ã210K Spiral Cam Sub-Assembly 109872 37.00 Ã210K Cylinder Knob Sub-Assembly 109873 Ã 93.00210K Trim Sub-Assembly 109879 Ã 95.00230L Tailpiece Auxiliary 900894 14.00 Ã210K Wave Spring Washer Pkg/10 090103 8.50 Ã

**230L Retaining Ring 964334 9.50 Ã210/230 Cylinder Retaining Cup 968201 14.00 Ã210K Knob Spacer 969140 11.50 Ã210K Knob 969157 Ã 25.00210K-BE Knob 969352 Ã 15.00230TP Cam 969903 9.50 Ã230TP Slider 969904 9.50 Ã230TP Locking Cam 969906 9.50 Ã230TP Locking Cam Latch 969908 14.00 Ã230TP Compression Spring 969909 9.50 Ã230TP Thumbpiece 969910 Ã 56.00

210K/L Spindle Shaft 970979 9.50 Ã230L Stud 971245 10.50 Ã230L Cylinder Collar 971249 Ã 19.00

**230L Lever Cam 971257 14.00 Ã230L Locking Plunger 971497 9.50 Ã230L Locking Slider 971259 6.50 Ã

*230L Lever Cam 050813 9.50*230L Shear Pin Kit w/ Retaining Pin 050611 9.50

* For 230L trim shipped after 3/3/14** For 230L trim shipped before 3/3/14

List Price


Finished

386/388 Series Trims386 Housing Retainer Pkg/2 090104 8.50386/388 Cylinder Retainer Pkg 900624 14.00386 Mounting Stud Kit 050584 10.50386 Mounting Stud Set Screw Pkg/2 090105 6.50388 Mounting Stud Pkg/2 090106 10.50

118



Trims (continued)

List Price


Finished US26D US10B US10 US4

US3, US26,SPBLK

550/110 Series Trims555/556 Cylinder Disc & Cam Assembly 101212 145.00 Ã Ã Ã Ã Ã550/555/556 Pull Bar Assembly 108705 Ã 176.00 183.00 233.00 176.00 233.00550DT Screw Package 900760 Ã 41.00 41.00 41.00 41.00 41.00555NL Screw Package 900761 41.00 Ã Ã Ã Ã Ã556NL Screw Package 900784 Ã 10.50 10.50 10.50 10.50 10.50556 Rod Member 952820 97.00 Ã Ã Ã Ã Ã550/555/556 Special Cylinder Screw - 1 3/4" Door 959055 9.50 Ã Ã Ã Ã Ã550/555/556 Special Cylinder Screw - 2 1/4" Door 959056 9.50 Ã Ã Ã Ã Ã550/555/556 Hex Stud 959560 9.50 Ã Ã Ã Ã Ã555 Cylinder Latch Release RH 959563 37.00 Ã Ã Ã Ã Ã555NL-MD Cylinder Spacer Collar - 1 3/4" Door 960003 22.00 Ã Ã Ã Ã Ã110NL Cylinder Spacer Collar 960060 37.00 Ã Ã Ã Ã Ã555 Cylinder Latch Release LH 960109 37.00 Ã Ã Ã Ã Ã110NL-WD Cylinder Spacer Collar 960316 37.00 Ã Ã Ã Ã Ã555NL Cylinder Spacer Collar - 2 1/4" Door 960317 22.00 Ã Ã Ã Ã Ã556NL Cylinder Spacer Collar - 1 3/4" Door 960676 22.00 Ã Ã Ã Ã Ã556NL Cylinder Spacer Collar - 2 1/4" Door 960689 22.00 Ã Ã Ã Ã Ã550/555/556 Sex Bolt Extension 960902 10.50 Ã Ã Ã Ã Ã110NL Cylinder Assembly Countersink Washer 961180 10.50 Ã Ã Ã Ã Ã555NL Cylinder Assembly Cylinder Base 961280 Ã 43.00 42.00 42.00 38.00 42.001/8" Short Arm Hex Wrench 050613 10.50 Ã Ã Ã Ã Ã556 3/32 Short Hex Key 050614 9.50 Ã Ã Ã Ã Ã550/555/556 Socket Set Screw 963581 9.50 Ã Ã Ã Ã Ã550/555/556 Pull Base 965310 Ã 60.00 60.00 64.00 60.00 64.00555/556 Cylinder Pull Base 965312 Ã 45.00 45.00 55.00 42.00 55.00550/555/556 Cylinder Hole Cover 965317 Ã 43.00 43.00 66.00 43.00 66.00556NL Cylinder Assembly Cylinder Base 966985 Ã 97.00 97.00 112.00 97.00 112.00110NL-MD Cylinder Collar 967291 Ã 40.00 40.00 45.00 40.00 45.00110NL Cylinder Assembly Cylinder Disc 971593 55.00 Ã Ã Ã Ã Ã

880/606/608 Series Trims *216D Cylinder Anchor Plate 880 Trim 032114 12.50 Ã Ã Ã Ã Ã606K/880K Orbit Knob Assembly 110544 Ã 140.00 140.00 140.00 140.00 211.00606K/880K Orbit Knob Assembly (DT) 110547 Ã 140.00 140.00 140.00 140.00 211.00880 Screw Package 2 1/4" Dr 900531 Ã 15.00 23.00 15.00 15.00 15.00880 Screw Package 1 3/4" Dr 900533 Ã 9.50 22.00 10.50 10.50 10.50880-V Screw Package Trim 900542 9.50 Ã Ã Ã Ã Ã880 Screw Package (Bottom Stud) 900771 Ã 9.50 9.50 9.50 9.50 9.50880DT-V SA Screw Package 900783 Ã 11.50 11.50 11.50 11.50 11.50606DT/NL/TP Screw Package 900772 Ã 9.50 9.50 9.50 9.50 9.50606K/606K-DT Screw Package 900782 Ã 11.50 11.50 11.50 11.50 11.50608 Screw Package 900776 Ã 10.50 10.50 10.50 10.50 10.50880 Series Hex Stud 956760 9.50 Ã Ã Ã Ã Ã880 Pull Grip 972467 Ã Ã 100.00 Ã 84.00 134.00880 Pull Grip 972466 Ã 100.00 Ã Ã Ã Ã880-M/V Thumbpiece 959575 Ã 54.00 54.00 48.00 48.00 75.00880 Thumbpiece Axle 959603 9.50 Ã Ã Ã Ã Ã

* For Trims shipped after October 1989. Otherwise, see service replacement page 132.

119



(continued) Trims

List Price



US3, �US15, US26,SPBLK

US32US32D

880/606/608 Series Trims*880-M Cylinder Collar 961267 Ã 35.00 35.00 41.00 35.00 41.00 Ã880DT-V-SA 12-24 x 1/2" UFPHMS 963011 9.00 Ã Ã Ã Ã Ã Ã606K/880K Roll Pin (3-32 x 7/8) 963196 9.00 Ã Ã Ã Ã Ã Ã880NL/DT 12-24 x 3/8" UFPHMS 963579 9.50 Ã Ã Ã Ã Ã Ã606K/880K 3/8" Lockwasher 963703 9.00 Ã Ã Ã Ã Ã Ã606K/880K-DT/K-NL Hex Nut 963704 9.00 Ã Ã Ã Ã Ã Ã880-R Cylinder Collar 965226 Ã 35.00 35.00 41.00 35.00 41.00 Ã880 TP Bracket Screw 965237 9.00 Ã Ã Ã Ã Ã Ã606/880 DT Spindle Lock 965568 9.00 Ã Ã Ã Ã Ã ÃExtended Spindle - 880K 968883 153.00 Ã Ã Ã Ã Ã Ã880TP Thumbpiece Bracket 969353 9.50 Ã Ã Ã Ã Ã Ã880K Booster Body 970137 25.00 Ã Ã Ã Ã Ã Ã880K Booster Torsion Spring 970138 9.00 Ã Ã Ã Ã Ã Ã880K Booster Spacer 970139 9.00 Ã Ã Ã Ã Ã Ã880K Flange Bearing - 880K 970159 10.50 Ã Ã Ã Ã Ã Ã608/880TP-R Thumbpiece 970488 Ã 54.00 54.00 75.00 48.00 75.00 Ã

* For Trims shipped after October 1989. Otherwise, see service replacement page 60.

990/996 Series Trim#01 Lever - 992 RMV/994/996 L-DT/L-NL 050001 Ã 165.00 165.00 186.00 165.00 226.00 Ã#02 Lever - 992 RMV/994/996 L-DT/L-NL 050002 Ã 165.00 165.00 186.00 165.00 226.00 Ã#03 Lever - 992 RMV/994/996 L-DT/L-NL 050003 Ã 165.00 165.00 186.00 165.00 226.00 Ã#05 Lever - 992 RMV/994/996 L-DT/L-NL 050008 Ã 165.00 165.00 186.00 165.00 226.00 Ã#06 Lever - 992 RMV/994/996 L-DT/L-NL 050006 Ã 165.00 165.00 186.00 165.00 226.00 Ã#07 Lever - 992 RMV/994/996 L-DT/L-NL 050007 Ã 165.00 165.00 186.00 165.00 226.00 Ã#12 Lever - 992 RMV/994/996 L-DT/L-NL (RHR) 050012 Ã 165.00 165.00 186.00 165.00 226.00 Ã#12 Lever - 992 RMV/994/996 L-DT/L-NL (LHR) 050013 Ã 165.00 165.00 186.00 165.00 226.00 Ã#16 Lever - 992 RMV/994/996 L-DT/L-NL 050009 Ã 165.00 165.00 186.00 165.00 226.00 Ã#17 Lever - 992 RMV/994/996 L-DT/L-NL 050017 Ã 165.00 165.00 186.00 165.00 226.00 Ã#18 Lever - 992 RMV/994/996 L-DT/L-NL 050010 Ã 165.00 165.00 186.00 165.00 226.00 Ã#01 Lever - 994/996 RMV L/L-BE 050732 Ã 165.00 165.00 186.00 165.00 226.00 Ã#02 Lever - 994/996 RMV L/L-BE 050733 Ã 165.00 165.00 186.00 165.00 226.00 Ã#03 Lever - 994/996 RMV L/L-BE 050734 Ã 165.00 165.00 186.00 165.00 226.00 Ã#05 Lever - 994/996 RMV L/L-BE 050735 Ã 165.00 165.00 186.00 165.00 226.00 Ã#06 Lever - 994/996 RMV L/L-BE 050736 Ã 165.00 165.00 186.00 165.00 226.00 Ã#07 Lever - 994/996 RMV L/L-BE 050737 Ã 165.00 165.00 186.00 165.00 226.00 Ã#12 Lever - 994/996 RMV L/L-BE RHR 050738 Ã 165.00 165.00 186.00 165.00 226.00 Ã#12 Lever - 994/996 RMV L/L-BE LHR 050739 Ã 165.00 165.00 186.00 165.00 226.00 Ã#16 Lever - 994/996 RMV L/L-BE 050740 Ã 165.00 165.00 186.00 165.00 226.00 Ã#17 Lever - 994/996 RMV L/L-BE 050741 Ã 165.00 165.00 186.00 165.00 226.00 Ã#18 Lever - 994/996 RMV L/L-BE 050742 Ã 165.00 165.00 186.00 165.00 226.00 ÃM51 Lever Kit - 996 RMV 114811 Ã 232.00 232.00 232.00 232.00 232.00 ÃM51 Lever Kit - 996 RMV 114813 Ã Ã Ã Ã Ã Ã 232.00M52 Lever Kit - 996 RMV 051921 Ã 232.00 232.00 232.00 232.00 232.00 ÃM52 Lever Kit - 996 RMV 051923 Ã Ã Ã Ã Ã Ã 232.00M53 Lever Kit - 996 RMV 051929 Ã 232.00 232.00 232.00 232.00 232.00 ÃM53 Lever Kit - 996 RMV 051931 Ã Ã Ã Ã Ã Ã 232.00M54 Lever Kit - 996 RMV 114827 Ã 232.00 232.00 232.00 232.00 232.00 ÃM54 Lever Kit - 996 RMV 114829 Ã Ã Ã Ã Ã Ã 232.00M55 Lever Kit - 996 RMV 051937 Ã 232.00 232.00 232.00 232.00 232.00 ÃM55 Lever Kit - 996 RMV 051939 Ã Ã Ã Ã Ã Ã 232.00M56 Lever Kit - 996 RMV 114823 Ã 232.00 232.00 232.00 232.00 232.00 ÃM56 Lever Kit - 996 RMV 114825 Ã Ã Ã Ã Ã Ã 232.00M57 Lever Kit - 996 RMV 51915 Ã Ã Ã Ã Ã Ã 232.00M61LH Lever Kit - 996 RMV 114815 Ã 232.00 232.00 232.00 232.00 232.00 ÃM61LH Lever Kit - 996 RMV 114817 Ã Ã Ã Ã Ã Ã 232.00M61RH Lever Kit - 996 RMV 114819 Ã 232.00 232.00 232.00 232.00 232.00 Ã

120



Trims (continued)




US32US32D

990/996 Series Trim (continued)

List Price

M61RH Lever Kit - 996 RMV 114821 Ã Ã Ã Ã Ã Ã 232.00M62LH Lever Kit - 996 RMV 051917 Ã Ã Ã Ã Ã Ã 232.00M62RH Lever Kit - 996 RMV 051919 Ã Ã Ã Ã Ã Ã 232.00M63LH Lever Kit - 996 RMV 114843 Ã 232.00 232.00 232.00 232.00 232.00 ÃM63LH Lever Kit - 996 RMV 114845 Ã Ã Ã Ã Ã Ã 232.00M63RH Lever Kit - 996 RMV 114847 Ã 232.00 232.00 232.00 232.00 232.00 ÃM63RH Lever Kit - 996 RMV 114849 Ã Ã Ã Ã Ã Ã 232.00M81 Lever Kit - 996 RMV 051925 Ã 232.00 232.00 232.00 232.00 232.00 ÃM81 Lever Kit - 996 RMV 051927 Ã Ã Ã Ã Ã Ã 232.00M82 Lever Kit - 996 RMV 051933 Ã 232.00 232.00 232.00 232.00 232.00 ÃM82 Lever Kit - 996 RMV 051935 Ã Ã Ã Ã Ã Ã 232.00M83 Lever Kit - 996 RMV 114831 Ã 232.00 232.00 232.00 232.00 232.00 ÃM83 Lever Kit - 996 RMV 114833 Ã Ã Ã Ã Ã Ã 232.00M84 Lever Kit - 996 RMV 114851 Ã 232.00 232.00 232.00 232.00 232.00 ÃM84 Lever Kit - 996 RMV 114853 Ã Ã Ã Ã Ã Ã 232.00M85LH Lever Kit - 996 RMV 114835 Ã 232.00 232.00 232.00 232.00 232.00 ÃM85LH Lever Kit - 996 RMV 114837 Ã Ã Ã Ã Ã Ã 232.00M85RH Lever Kit - 996 RMV 114839 Ã 232.00 232.00 232.00 232.00 232.00 ÃM85RH Lever Kit - 996 RMV 114841 Ã Ã Ã Ã Ã Ã 232.00

994 Retrofit Plate 050099 - 73.00 73.00 58.00 58.00 94.00 Ã990 x 330/350 Screw Package 1 3/4" Door 050140 Ã 11.50 11.50 11.50 11.50 11.50 Ã990 x 330/350 Screw Package 2 1/4" Door 050141 Ã 11.50 11.50 11.50 11.50 11.50 ÃTailpiece Guide Lead Kit 050156 14.00 Ã Ã Ã Ã Ã ÃWave Spring Washer - 992L Pkg/10 090103 8.50 Ã Ã Ã Ã Ã Ã

Orbit Knob Assembly - 991K 110537 Ã 95.00 112.00 152.00 126.00 162.00 ÃSlider Sub-Assembly - 991K-R/V 110768 98.00 Ã Ã Ã Ã Ã ÃSlider Sub-Assembly - 992L-R/V 110769 110.00 Ã Ã Ã Ã Ã ÃSlider Sub-Assembly - 994/996L-C/V 111869 126.00 Ã Ã Ã Ã Ã ÃSlider Sub-Assembly - 994/996L-M 112462 126.00 Ã Ã Ã Ã Ã Ã990 Screw Package 1 3/4" - 2 1/4" Door 900853 Ã 22.00 22.00 22.00 22.00 22.00 Ã991/992/994/996 Screw Package 900920 9.50 Ã Ã Ã Ã Ã Ã392-7 Mounting Pack 900954 Ã 10.50 Ã Ã Ã Ã ÃHex Stud - 990 Trim 956760 9.50 Ã Ã Ã Ã Ã ÃPull Grip - 990 972467 Ã Ã 100.00 Ã 84.00 134.00 ÃPull Grip - 990 972466 Ã 100.00 Ã Ã Ã Ã ÃThumbpiece - 696/990-M 959575 Ã 54.00 54.00 48.00 48.00 75.00 ÃThumbpiece Axle - 696/990 959603 9.50 Ã Ã Ã Ã Ã -Cylinder Collar - 696/990-M 961267 Ã 34.00 34.00 39.00 34.00 39.00Flat Washer - 992K-DT/NL/BE/992L 963105 10.50 Ã Ã Ã Ã Ã12-24 x 3/8" UFPHMS - 990NL/DT 963579 9.50 Ã Ã Ã Ã ÃRetaining Ring - 991K 963767 9.50 Ã Ã Ã Ã ÃRetaining Ring - 992L 964097 9.50 Ã Ã Ã Ã Ã10-24 x 1/2" Socket Set Cap Screw 964183 9.50 Ã Ã Ã Ã ÃRetaining Ring - 991K-DT/NL/BE/992L 964285 9.50 Ã Ã Ã Ã Ã1/4-20 x 5/8" Socket Set Screw 964353 9.50 Ã Ã Ã Ã ÃCylinder Collar - 990-R 965226 Ã 35.00 35.00 41.00 35.00 41.00TP Bracket Screw - 990TP 965237 9.00 Ã Ã Ã Ã ÃCylinder Retaining Cup - 990/996 Trim 968201 14.00 Ã Ã Ã Ã ÃSpring - 991K 969012 9.50 Ã Ã Ã Ã ÃThumbpiece Bracket - 990TP 969353 9.50 Ã Ã Ã Ã ÃR&V Finger - 991K/992L 969545 11.50 Ã Ã Ã Ã ÃDT Yoke - 991K/992L ( DT and NL) 970117 63.00 Ã Ã Ã Ã Ã

�� US15 finish available with device series 98 trims, only.

121



(continued) Trims


Finished US26DSP313, US10B US10 US4

US3, US26,SPBLK

Optional Trim696/697DT x 330/350 Screw Package 1 3/4" Dr 050142 Ã 11.50 11.50 11.50 11.50 11.50696/697DT x 330/350 Screw Package 2 1/4" Dr 050143 Ã 11.50 11.50 11.50 11.50 11.50696/697 Cylinder Hardware Assembly 109369 Ã 75.00 75.00 112.00 97.00 127.00696/697 Screw Package 1 3/4" Door 900839 Ã 9.50 9.50 9.50 9.50 9.50696/697 Screw Package 2 1/4" Door 900840 Ã 9.50 9.50 9.50 9.50 9.50Hex Stud - 608 Trim 953671 11.50 Ã Ã Ã Ã ÃPull Grip - 608/696 Trim 972467 Ã Ã 100.00 Ã 84.00 134.00Pull Grip - 608/696 Trim 972466 Ã 100.00 Ã Ã Ã ÃThumbpiece - 608 Trim 959575 Ã 54.00 54.00 48.00 48.00 75.00Thumbpiece Axle - 608 Trim 959603 9.50 Ã Ã Ã Ã ÃSex Bolt Extension - 606/608 Trim 960902 10.50 Ã Ã Ã Ã ÃThumbpiece Bracket - 608TP-R/V 960921 17.00 Ã Ã Ã Ã Ã3/8" Lockwasher - 606K 963703 9.00 Ã 9.50 Ã Ã ÃHex Nut - 606K-DT/K-NL 963704 9.00 Ã Ã Ã Ã Ã1/4-20 3/4" Socket Set Screw 964355 9.50 Ã Ã Ã Ã ÃThumbpiece Bracket - 608TP-M 965130 38.00 Ã Ã Ã Ã ÃSex Bolt Head - 606/608 Trim 967329 Ã 11.50 11.50 11.50 11.50 11.50Pull Grip - 697 Trim 968694 Ã 170.00 170.00 170.00 170.00 199.00Sex Bolt Head - 696/697 Trim 968918 Ã 11.50 11.50 11.50 11.50 11.50Hex Stud - 696/697 Trim 969091 9.50 Ã Ã Ã Ã ÃSex Bolt Extension - 696/697 Trim 969092 11.50 Ã Ã Ã Ã ÃThumbpiece - 608TP-R 970488 Ã 54.00 54.00 75.00 48.00 75.00Thumbpiece - 696/697-R/V 970491 Ã 54.00 54.00 75.00 48.00 75.00Pull Grip - 608 Trim 972469 Ã Ã Ã 129.00 Ã Ã334 Cylinder Collar 961267 Ã 35.00 35.00 41.00 35.00 41.00

List Price

List Price


Finished US26DSP313, US10B US10 US4


990/996 Series Trims (continued)Flange Bearing - 991K 970159 10.50 Ã Ã Ã Ã ÃThumbpiece - 990TP-R 970488 Ã 54.00 54.00 75.00 48.00 75.00Pull Grip - 696/990 972469 Ã Ã Ã 129.00 Ã ÃSlider Sub-Assembly - 992L-M 971012 110.00 Ã Ã Ã Ã ÃDT Cam Pin - 992/994/996 971015 10.50 Ã Ã Ã Ã ÃHex Stud - 991K/992L 971440 9.50 Ã Ã Ã Ã ÃLift Spring - 992/994 971573 5.50 Ã Ã Ã Ã ÃShear Pin Kit - 992/994/996 w/retaining ring 050611 9.50 Ã Ã Ã Ã ÃMounting Stud - 994/996 971585 9.50 Ã Ã Ã Ã ÃE996 Mort Conv to E Kit 050673 550.00 Ã Ã Ã Ã ÃE996 R/VC Conv to E Kit 050672 529.00 Ã Ã Ã Ã ÃE996 Locking Mech Kit (includes solenoid) 050671 331.00 Ã Ã Ã Ã ÃE996 Wire Harness (Cable) CABLE.10038 34.00 Ã Ã Ã Ã ÃE996 Solenoid Kit 050814 88.00

�� US15 finish available with device series 98 trims, only.

122



Mullions

List Price


FinishedSP28, SP313

US4, US10, US28,

3135654/5754 Fitting Set 050130 Ã Ã 149.005654/5754 Top Fitting & Cover 050135 Ã Ã 90.00KR54 Retrofit Kit 050168 Ã 384.00 ÃKR54-F Retrofit Kit 050169 Ã 422.00 Ã5654/5754 Bottom Fitting 050190 Ã Ã 90.009954 Fitting Set 050241 Ã 280.00 Ã1654/4954 Fitting Set 050330 Ã 109.00 Ã1654/4954 Top Fitting & Cover 050335 Ã 55.00 Ã4754/4854 Fitting Set 050371 Ã 220.00 Ã4754/4854 Top Electrical Fitting & Cover 050381 Ã 167.00 Ã9854 Top Mullion Fitting Kit 050383 Ã 167.00 Ã1654/4754/4854/4954 Bottom Fitting 050390 Ã 54.00 Ã9854/9954 Top Fitting & Cover 050391 Ã 140.00 Ã98/9954 Bottom Fitting & Cover 050392 Ã 140.00 ÃKR Mullion Cylinder Lock Nut 050526 10.50 Ã ÃWeatherstripping (10') Use 2 Per Mullion 050580 23.00 Ã ÃMullion (Top) Screw Package 900400 12.50 Ã ÃMullion (Bottom) Screw Package 900402 19.00 Ã ÃKR1654/4954 Mullion Mounting Package 900409 Ã 58.00 ÃKR9854/9954 Mullion Mounting Package 900410 Ã 47.00 Ã9954 (Bottom) Screw Package 900411 19.00 Ã Ã9954 (Top) Screw Package 900413 19.00 Ã Ã4754/4854/4954 Top Fitting Cover 961047 Ã 15.00 Ã5654 Mullion Edging - 7' 965712 Ã Ã 50.005654 Mullion Edging - 8' 965713 Ã Ã 56.005654 Mullion Edging - 10' 965714 Ã Ã 62.009954 Top Fitting Cover 968645 Ã 15.00 ÃKR Inner Mullion Back Cover Plate 971187 Ã 19.00 ÃKR Shim Plate 971212 9.50 Ã ÃKR-F Shim Plate 971313 Ã 34.00 ÃKR9954 Top Fitting 971312 Ã 95.00 ÃKR9854/9954 Fusible Spacer 971316 Ã 48.00 ÃKR Mullion Cylinder Locking Washer 971328 12.50 Ã ÃKR1654/4954 Top Fitting 971340 Ã 83.00 ÃMT54 Wall Mounted Storage Kit 050581 Ã 122.00 ÃFemale Receptacle Wire Assy 105988 60.00 Ã ÃMale Receptacle Wire Assy 105987 68.00 Ã Ã

123



Screw Packs/ Shims/ Miscellaneous

List Price


Finished US32D US10

US3, US4,

US10B, US32

ShimsShim 1409 Strike 959953 11.50 Ã Ã ÃShim 1606 Strike 961084 15.00 Ã Ã ÃShim 248L-4 Strike 969280 9.50 Ã Ã ÃShim 264/299F/499F Strike 945521 9.50 Ã Ã ÃShim 266 Strike 967333 Ã 37.00 Ã 37.00Shim 299 Strike 970321 9.50 Ã Ã ÃShim 268 Strike Auxilliary Bolt 967269 9.50 Ã Ã Ã909 Strike Shim Pkg/4 090108 50.00 Ã Ã954 Strike Shim Pkg/4 090109 52.00 Ã ÃMullion Stabilizer Shim 961530 8.50 Ã Ã

Screw PacksScrew Package 268/472/473 900252 9.50 Ã Ã ÃScrew Package 1408 900253 9.50 Ã Ã ÃScrew Package 1409/1410/1439 900254 11.50 Ã Ã ÃScrew Package 248L-4/264/266/1606 900263 9.50 9.50 Ã 9.50Screw Package 4263/4582 900281 Ã 10.50 Ã 10.50Screw Package 4268 900284 Ã 10.00 14.00 10.00Screw Package 338 900285 9.50 Ã Ã ÃScrew Package 499-F 900289 11.50 Ã Ã ÃScrew Package 575/575-2/576/4690 900532 Ã 9.50 9.50 9.50Screw Package 889 Cover Plate 900820 Ã 11.50 11.50 11.50Screw Package 99GBK-R x 499F 1 3/4" Dr 900847 Ã 15.00 15.00 15.00Screw Package 99GBK-R x 499F 2 1/4" Dr 900848 Ã 15.00 15.00 15.00Screw Package 99GBK-R/M/V 900849 14.00 Ã Ã ÃScrew Package RG27 900888 10.50 Ã Ã Ã

MiscellaneousDL Lubricant 4 oz. 091091 32.00 Ã Ã ÃMonitor Strike Spacer Plate - 4263/4268 966671 11.50 Ã Ã ÃStrike Hook 499-F 661481 Ã 96.00 96.00 96.00Strike Plate 299 970323 9.50 Ã Ã ÃStrike Pop Rivet 1409/1439 963074 8.50 Ã Ã Ã

124



Maintenance Kit and Replacement Packages

Description Part. No.List

Price98/99 Maintenance Kit 050046 907.00Control Link Pin Pkg/10 090031 11.5033/35/98/99 Touch Bar Guide Pkg/10 090049 10.50NL Drive Screw Pkg/10 090074 14.0098/9927/27-F Auxiliary Bolt Spring Pkg/ 10 090076 9.50Bolt Return Spring Pkg/10 090065 9.50#10 External Tooth Lock Washer Pkg/10 PKGSRV.1007 10.50Top Latch Compression Spring Pkg/10 090056 9.50Truarc Retaining Ring T5304-18 Pkg/10 090107 9.50Shear Pin - 360/992/994/996 Pkg/50 PKGSRV.1010 48.00992L Lift Spring Pkg/20 PKGSRV.1011 17.001/4-20 Hex Stud - 991/992 Pkg/10 PKGSRV.1012 23.00Truarc Retaining Ring 5160-42 Pkg/10 PKGSRV.1013 14.0010-32 X 1/4" UFPHMS w/Nylock Pkg/6 090059 9.5010-24 x 3/4" PPHMS Pkg/10 PKGSRV.1015 10.5010-24 x 1" PPHMS Pkg/20 PKGSRV.1016 11.508-32 X 1/4" UFPHMS Pkg/20 PKGSRV.1018 9.50LBR Latch Mtg Screw Pkg/10 PKGSRV.1019 11.001/4-20 X 3/4" UFPHMS Pkg/10 PKGSRV.1020 15.0010-24 X 1 3/8" PPHMS Pkg/20 PKGSRV.1022 15.0010-24 X 3/4" FPHMS Pkg/10 PKGSRV.1023 10.5099 Cover Retaining Clip Pkg/10 PKGSRV.1024 10.5012-24 1/2" Hex Wshr Hd Tapping Screw Pkg/10 090073 7.50

125



Electric Strikes

List Price


Finished

622, 689. 395

US32D BLACK

5000 Series Screw Package US32D PKGSCR.1003 Ã Ã 11.005000 Series Screw Package Black PKGSCR.1004 Ã Ã 11.005000 Mounting Package US32D PKGMTG.1004 Ã Ã 11.005000 Mounting Package Black PKGMTG.1005 Ã Ã 11.006000 DS Replacement Kit Type A 050011 180.00 Ã Ã6000 DS Replacement Kit Type B 050015 180.00 Ã Ã6000 DS-LC Replacement Kit Type A 050016 180.00 Ã Ã6000 DS-LC Replacement Kit Type B 050018 180.00 Ã Ã5100 Faceplate Package - Standard 4 7/8" 050031 Ã 20.00 Ã5100 Faceplate Package - Round Corner 4 7/8" 050032 Ã 20.00 Ã5100 Faceplate Package - Long 7 15/16" 050033 Ã 20.00 Ã5100 Solenoid Kit 12/24VDC 050034 59.00 Ã Ã6000 Series Solenoid Kit 12VDC (FS & FSE) 050237 88.00 Ã Ã6000 Series Solenoid Kit 16 VDC (FS & FSE) 050239 88.00 Ã Ã6000 Series Solenoid Kit 24VDC (FS & FSE) 050240 88.00 Ã Ã6000 Series Solenoid Kit 28VDC 050699 86.00 Ã Ã6210 12VDC FS Box Assembly 111244 492.00 Ã Ã6210 12VDC FSE Box Assembly 111246 302.00 Ã Ã6210 24VDC FS Box Assembly 111247 342.00 Ã Ã6210 24VDC FSE Box Assembly 111250 249.00 Ã Ã6210 12VDC FS DS Box Assembly 111251 628.00 Ã Ã6210 12VDC FSE DS Box Assembly 111264 438.00 Ã Ã6211, 6211AL, 6212 12VDC FS Box Assembly 111711 285.00 Ã Ã6211, 6211AL, 6212 12VDC FSE Box Assembly 111712 285.00 Ã Ã6211, 6211AL, 6212 24VDC FS Box Assembly 111713 285.00 Ã Ã6211, 6211AL, 6212 24VDC FSE Box Assembly 111714 285.00 Ã Ã6211, 6211AL, 6212 12VDC FS DS Box Assembly 111715 423.00 Ã Ã6211, 6211AL, 6212 12VDC FSE DS Box Assembly 111716 423.00 Ã Ã6211, 6211AL, 6212 24VDC FS DS Box Assembly 111717 423.00 Ã Ã6211, 6211AL, 6212 24VDC FSE DS Box Assembly 111718 423.00 Ã Ã6114, 6214/5, 6222/4/4AL/5/6 12VDC FS Box Assembly 111719 333.00 Ã Ã6114, 6214/5, 6222/4/4AL/5/6 12VDC FSE Box Assembly 111720 333.00 Ã Ã6114, 6214/5, 6222/4/4AL/5/6 24VDC FS Box Assembly 111721 333.00 Ã Ã6114, 6214/5, 6222/4/4AL/5/6 24VDC FSE Box Assembly

111722 333.00 Ã Ã

6114, 6214/5, 6224/4AL/6 12VDC FS DS Box Assembly 111723 470.00 Ã Ã6114, 6214/5, 6224/4AL/6 12VDC FSE DS Box Assembly 111724 470.00 Ã Ã6114, 6214/5, 6224/4AL/6 24VDC FS DS Box Assembly 111725 470.00 Ã Ã6114, 6214/5, 6224/4AL/6 24VDC FSE DS Box Assembly 111726 470.00 Ã Ã6211WF, 6212WF 12VDC FS Box Assembly 111727 302.00 Ã Ã6211WF, 6212WF 12VDC FSE Box Assembly 111728 302.00 Ã Ã6211WF, 6212WF 24VDC FS Box Assembly 111729 302.00 Ã Ã6211WF, 6212WF 24VDC FSE Box Assembly 111730 302.00 Ã Ã6211WF, 6212WF 12VDC FS DS Box Assembly 111731 438.00 Ã Ã6211WF, 6212WF 12VDC FSE DS Box Assembly 111732 438.00 Ã Ã6211WF, 6212WF 24VDC FS DS Box Assembly 111733 438.00 Ã Ã6211WF, 6212WF 24VDC FSE DS Box Assembly 111734 438.00 Ã Ã6221, 6223 12VDC FS Box Assembly 111735 311.00 Ã Ã6221, 6223 12VDC FSE Box Assembly 111736 311.00 Ã Ã6221, 6223 24VDC FS Box Assembly 111737 311.00 Ã Ã6221, 6223 24VDC FSE Box Assembly 111738 311.00 Ã Ã

126



Electric Strikes (continued)


List Price

Non-Finished6223 12VDC FS DS Box Assembly 111739 449.006223 12VDC FSE DS Box Assembly 111740 449.006223 24VDC FS DS Box Assembly 111741 449.006223 24VDC FSE DS Box Assembly 111742 449.006111, 6113, 6213 12VDC FS Box Assembly 111743 303.006111, 6113, 6213 12VDC FSE Box Assembly 111744 303.006111, 6113, 6213 24VDC FS Box Assembly 111745 303.006111, 6113, 6213 24VDC FSE Box Assembly 111746 303.006111, 6113, 6213 12VDC FS DS Box Assembly 111747 439.006111, 6113, 6213 12VDC FSE DS Box Assembly 111748 439.006111, 6113, 6213 24VDC FS DS Box Assembly 111749 439.006111, 6113, 6213 24VDC FSE DS Box Assembly 111750 439.006112, 6121 12VDC FS Box Assembly 111751 295.006112, 6121 12VDC FSE Box Assembly 111752 295.006112, 6121 24VDC FS Box Assembly 111753 295.006112, 6121 24VDC FSE Box Assembly 111754 295.006112, 6121 12VDC FS DS Box Assembly 111755 431.006112, 6121 12VDC FSE DS Box Assembly 111756 431.006112, 6121 24VDC FS DS Box Assembly 111757 431.006112, 6121 24VDC FSE DS Box Assembly 111758 431.006216 12VDC FS Box Assembly 111759 303.006216 12VDC FSE Box Assembly 111760 303.006216 24VDC FS Box Assembly 111761 303.006216 24VDC FSE Box Assembly 111762 303.006216 12VDC FS DS Box Assembly 111763 439.006216 12VDC FSE DS Box Assembly 111764 439.006216 24VDC FS DS Box Assembly 111765 439.006216 24VDC FSE DS Box Assembly 111766 439.006210 24VDC FS DS Box Assembly 111813 483.006210 24VDC FSE DS Box Assembly 111814 483.006210 12VDC FS DS-LC Box Assembly 112754 445.006210 12VDC FSE DS-LC Box Assembly 112755 445.006211/6211AL/6212 12VDC FS DS-LC Box Assembly 112756 423.006211/6211AL/6212 12VDC FSE DS-LC Box Assembly 112757 423.006211/6211AL/6212 24VDC FS DS-LC Box Assembly 112758 423.006211/6211AL/6212 24VDC FSE DS-LC Box Assembly 112759 423.006114/6214/15/24/24AL/26 12VDC FS DS-LC Box Assembly 112760 470.006114/6214/15/24/24AL/26 12VDC FSE DS-LC Box Assembly 112761 470.006114/6214/15/24/24AL/26 24VDC FS DS-LC Box Assembly 112762 470.006114/6214/15/24/24AL/26 24VDC FSE DS-LC Box Assembly 112763 470.006211WF/6212WF 12VDC FS DS-LC Box Assembly 112764 438.006211WF/6212WF 12VDC FSE DS-LC Box Assembly 112765 438.006211WF/6212WF 24VDC FS DS-LC Box Assembly 112766 438.006211WF/6212WF 24VDC FSE DS-LC Box Assembly 112767 438.006223 12VDC FS DS-LC Box Assembly 112768 449.006223 12VDC FSE DS-LC Box Assembly 112769 449.006223 24VDC FS DS-LC Box Assembly 112770 449.006223 24VDC FSE DS-LC Box Assembly 112771 449.00

127



(continued) Electric Strikes

List Price

Description Part. No. Non-Finished US32DUS10,

US10B US4 US3 US326111/6113/6213 12VDC FS DS-LC Box Assembly 112772 439.00 Ã Ã Ã Ã Ã6111/6113/6213 12VDC FSE DS-LC Box Assembly 112773 439.00 Ã Ã Ã Ã Ã6111/6113/6213 24VDC FS DS-LC Box Assembly 112774 439.00 Ã Ã Ã Ã Ã6111/6113/6213 24VDC FSE DS-LC Box Assembly 112775 439.00 Ã Ã Ã Ã Ã6112/6121 12VDC FS DS-LC Box Assembly 112776 431.00 Ã Ã Ã Ã Ã6112/6121 12VDC FSE DS-LC Box Assembly 112777 431.00 Ã Ã Ã Ã Ã6112/6121 24VDC FS DS-LC Box Assembly 112778 431.00 Ã Ã Ã Ã Ã6112/6121 24VDC FSE DS-LC Box Assembly 112779 431.00 Ã Ã Ã Ã Ã6216 12VDC FS DS-LC Box Assembly 112780 439.00 Ã Ã Ã Ã Ã6216 12VDC FSE DS-LC Box Assembly 112781 439.00 Ã Ã Ã Ã Ã6216 24VDC FS DS-LC Box Assembly 112782 439.00 Ã Ã Ã Ã Ã6216 24VDC FSE DS-LC Box Assembly 112783 439.00 Ã Ã Ã Ã Ã6210 24VDC FS DS-LC Box Assembly 112784 445.00 Ã Ã Ã Ã Ã6210 24VDC FSE DS-LC Box Assembly 112785 445.00 Ã Ã Ã Ã Ã6000 Series DS-LC Switch & Clip Assembly 113232 136.00 Ã Ã Ã Ã Ã6210/11/13/14/16/6222/24/25/26 Screw Package 900288 Ã 10.50 10.50 10.50 10.50 10.506212 Screw Package 900290 Ã 10.00 10.00 10.00 10.00 10.006211/6212WF Strike Pocket Insert 900291 13.00 Ã Ã Ã Ã Ã6212 Strike Pocket Insert/Mounting Tab 900292 22.00 Ã Ã Ã Ã ÃDS Tripper Extension & Connector 900344 22.00 Ã Ã Ã Ã Ã6216 Inserts and Screw Package 900345 184.00 Ã Ã Ã Ã Ã6113 Frame Insert Package 900347 8.00 Ã Ã Ã Ã Ã6210 Auxiliary Bolt Plate Package 900584 31.00 Ã Ã Ã Ã Ã6111/6113 Screw Package 900870 Ã 9.00 9.00 9.00 9.00 9.006112/6121 Screw Package 900881 Ã 10.00 11.00 11.00 11.00 11.006114 Screw Package 900882 Ã 10.00 11.00 11.00 11.00 11.006211WF/6212WF/6221/6223 Screw Package 900885 Ã 9.00 9.00 9.00 9.00 9.006210 Strike Pocket Insert Mounting Package 900966 8.00 Ã Ã Ã Ã Ã#8 Ext. Tooth Lock Washer 964019 8.00 Ã Ã Ã Ã ÃSolenoid Washer 964037 8.00 Ã Ã Ã Ã Ã8-32 x 3/8" PPHMS 964070 8.00 Ã Ã Ã Ã Ã6-32 x 3/8" PPHMS Type 2A 964190 8.00 Ã Ã Ã Ã ÃSolenoid Spring 968713 10.00 Ã Ã Ã Ã Ã6211/6211WF Faceplate 968716 Ã 225.00 254.00 225.00 320.00 228.006212/6212WF Faceplate 969584 Ã 320.00 359.00 320.00 395.00 363.006111 Faceplate 970271 Ã 311.00 343.00 311.00 424.00 358.006211AL Faceplate 970272 Ã 271.00 317.00 271.00 382.00 276.006223 Faceplate 970274 Ã 271.00 312.00 271.00 389.00 312.006221 Faceplate 970276 Ã 376.00 413.00 376.00 450.00 428.006213 Faceplate 970278 Ã 296.00 323.00 296.00 398.00 323.006113 Faceplate 970280 Ã 308.00 319.00 308.00 418.00 319.006114 Faceplate 970300 Ã 256.00 317.00 289.00 358.00 267.006226 Faceplate 970301 Ã 252.00 286.00 252.00 369.00 258.006224 Faceplate 970302 Ã 362.00 379.00 350.00 487.00 373.006112/6121 Faceplate 970303 Ã 283.00 365.00 283.00 432.00 252.006222 Faceplate 970305 Ã 542.00 577.00 542.00 736.00 542.006225 Faceplate 970306 Ã 491.00 521.00 491.00 593.00 542.006224AL Faceplate 970310 Ã 372.00 412.00 372.00 515.00 379.00

128



Electric Strikes (continued)

List Price

Description Part. No. Non-Finished US32DUS10,

US10B US4 US3 US32DS Tripper Extension 970384 9.00 Ã Ã Ã Ã ÃFS Slider (6211WF/6212WF/6221/6223 Only) 970387 27.00 Ã Ã Ã Ã ÃFSE Slider (Except 6211WF/6212WF/6221/6223) 970387 27.00 Ã Ã Ã Ã ÃFSE Slider (6211WF/6212WF/6221/6223 Only) 970388 27.00 Ã Ã Ã Ã ÃFS Slider (Except 6211WF/6212WF/6221/6223) 970388 27.00 Ã Ã Ã Ã Ã6216 Large Faceplate Insert 970407 Ã 84.00 97.00 84.00 115.00 100.006121 Housing Cover 970412 Ã 279.00 279.00 279.00 369.00 376.006216 Small Faceplate Insert 970415 Ã 84.00 97.00 84.00 115.00 100.006210 Faceplate 971198 Ã 213.00 300.00 213.00 340.00 289.006216 Faceplate Less Inserts 971385 Ã 386.00 405.00 386.00 544.00 375.006215 Faceplate 971415 Ã 282.00 317.00 282.00 372.00 289.006214 Faceplate 971417 Ã 350.00 372.00 341.00 475.00 365.00Connector 990132 9.00 Ã Ã Ã Ã Ã9100 Filler Bracket Kit 050749 41.00 Ã Ã Ã Ã Ã6211/12 Spring Kit 050939 27.00 Ã Ã Ã Ã Ã6210 Spring Kit 050940 33.00 Ã Ã Ã Ã Ã6216 Spring Kit 050941 33.00 Ã Ã Ã Ã Ã6000 Spring Kit for Models 6111/6113/6213/6221/6223 050942 27.00 Ã Ã Ã Ã Ã6000 Spring Kit for Models 6112/6114/6121/6214/ 6215/6222/6224/6224AL/6225/6226 050943 27.00 Ã Ã Ã Ã Ã6300 Cable Kit 050803 38.00 Ã Ã Ã Ã Ã6300 Strike Shim Kit 050804 48.00

129



Electric Accessories

Description Part. No.List

Price

Electric Latch RetractionEL Dogging Rod - 3' 050531 45.00EL Dogging Rod - 4' 050532 45.00EL Dogging Rod Retainer 050538 10.50

EL Solenoid & Plunger 050535 259.00HD-EL Solenoid 050536 259.00HD-EL Solenoid Plunger 050537 96.00

Pulse Width Module 050534 235.00EL 6' Cable and Connector 110388 36.00EL Receptacle Connector 050539 9.50EL Female Terminal 050540 9.50HD-EL Dog Screw 050541 11.50HD-EL Dogging Spring 050543 11.50HD-EL Solenoid Bracket 050542 20.00

ChexitChexit PCB Kit - 15 second release 050228 823.00Chexit PCB Kit - 30 second release 050809 931.00Chexit PCB KIT - 0 Second Delay release 050701 931.00Chexit PCB Kit - 15 Second Boca release 050702 931.00

CX99-RCM Kit Less Module 050375 213.00CX98-RCM Kit Less Module 050376 213.00

CX Solenoid & Plunger 050533 242.00Chexit Wiring Assembly 112018 157.00Sign 15 Second - Chexit/DE5101 113781 46.00Sign 30 Second - Chexit/DE5101 113782 49.00LED Cover Mask - Chexit 970513 9.50LED Cover - Chexit 970519 20.00Chexit 10' Cable Assy Kit 050796 82.00

130



Electrical Accessories (continued)


List Price Non-

Finished

Switch AccessoriesLX-RX 94/95 Switch Wire Assembly (R/Y/B) 110360 87.00SS Cable 050544 105.00SS Housing 050545 349.00

E360 ControlsE360 FSE SOLENOID KIT 050743 487.00E360 FS SOLENOID KIT 050744 487.00

E996 TrimsE996 Mort Conv to E Kit 050673 550.00E996 R/VC Conv to E Kit 050672 529.00E996 Locking Mech Kit 050671 331.00E996 Wire Harness CABLE.10038 34.00

131



(continued) Electrical Accessories

26 SERIES Exit Alarm Lock - GUARD-X

List Price


FinishedSP28, SP313

Alarm KitALK PCB Assembly 101030 363.00 ÃALK Cylinder Collar - 22 967704 Ã 17.00ALK Cylinder Collar - 33A/35A/98/99 050525 Ã 35.00ALK Sign 969122 18.00 ÃALK Arming Label 969349 9.50 ÃALK Disarming Label 969350 9.50 ÃALK Retainer Nut 969354 18.00 ÃALK Cylinder Spacer 970594 11.50 ÃALK Switch Actuator 971556 15.00 ÃALK Cylinder Bracket 971557 10.50 ÃALK Battery 990637 17.00 ÃCover Plate Anti-Rattle Spring Pkg/10 090036 9.50 Ã

MiscellaneousSwitch Cover Assy - 4000 Monitor Strikes 105100 102.00 ÃEPT Filler Kit 900978 Ã 21.00

List Price


FinishedBLACK,

US19SP28, SP313

2670 Lockside Cover Kit SP28 COVER.109 Ã Ã 145.002670 Lockside Cover Kit US19 COVER.122 Ã 145.00 Ã2670 Lockside Cover Kit SP313 COVER.121 Ã Ã 145.002670 Hingeside Cover Kit - Silver COVER.114 Ã Ã 37.002670 Hingeside Cover Kit - Black COVER.115 Ã 37.00 Ã2670 Hingeside Cover Kit - Brown COVER.116 Ã Ã 37.002670 Endcap Kit ECAP.105 Ã 21.00 Ã2670 PCB Kit Field - English PCB.10018 196.00 Ã Ã2670 PCB Kit Field - Spanish PCB.10019 196.00 Ã Ã2670 PCB Kit Field - French PCB.10020 196.00 Ã ÃAlarm Sign - French SIGN.1001 50.00 Ã ÃAlarm Sign - Spanish SIGN.1002 50.00 Ã ÃAlarm Sign - English SIGN.1003 50.00 Ã ÃCylinder Retaining Bracket Kit BRKT.121 29.00 Ã ÃLightpipe Kit PIPE.101 22.00 Ã Ã2670 Cylinder Tailpiece Extension 050379 7.50 Ã Ã2670 Device Mounting Package US28 PKGMTG.1002 Ã Ã 25.002670 Device Mounting Package Black PKGMTG.1003 Ã 25.00 Ã2670 Cover Screw Kit SP28 PKGSCR.1001 Ã Ã 7.50

132



Service Replacement Itemsn

List Price


Finished US28US10B, US26D US32D US10 US4

US3, US26

7500-880TP Retrofit Kit 050122 Ã Ã 56.00 Ã 56.00 56.00 56.00End Cap Mtg. Brkt. Screw (Pkg of 30) 090060 40.00 Ã Ã Ã Ã Ã ÃOld Style 227 Dog Key 5/32" (Pkg of 10) 090084 55.00 Ã Ã Ã Ã Ã Ã34/58 Thumb Latch Lift Spring (Pkg of 5) 091030 54.00 Ã Ã Ã Ã Ã Ã34/58 Dog Lock Spring (Pkg of 10) 091031 96.00 Ã Ã Ã Ã Ã Ã34/58 Auxiliary Bolt Spring (Pkg of 10) 091032 158.00 Ã Ã Ã Ã Ã Ã66 Dog Screw (Pkg of 10) 091061 112.00 Ã Ã Ã Ã Ã Ã222 Dog Key 7/32" (Pkg of 10) 091080 75.00 Ã Ã Ã Ã Ã ÃWedgetite Screw - Fine Thread (Pkg of 10) 091082 50.00 Ã Ã Ã Ã Ã Ã370 Series 6-32 x 1/4 UFPHMS 963150 9.50 Ã Ã Ã Ã Ã Ã370 Series 1/4-20 x 1 Set Screw 963584 9.50 Ã Ã Ã Ã Ã Ã33/3527 Bottom Rod Roll Pin 963585 9.50 Ã Ã Ã Ã Ã ÃSS333NL Backplate Screw 8-32 x 3/8" PPHMS 963712 9.50 Ã Ã Ã Ã Ã Ã10-24 x 1/2" UFPHMS Epoxy Lock 963873 9.50 Ã Ã Ã Ã Ã Ã370 Series 6-32 x 7/16" PPHMS 963902 9.50 Ã Ã Ã Ã Ã Ã333/337 1/4-20 x 2 Socket Set Screw 963905 9.50 Ã Ã Ã Ã Ã Ã370 Series #10 Flat Washer 964375 9.50 Ã Ã Ã Ã Ã ÃCover Bearing Insert - Old Style 969889 9.50 Ã Ã Ã Ã Ã Ã334/333/337/3308 Sex Bolt Extension 971614 10.50 Ã Ã Ã Ã Ã Ã

Note Original ship date on Parts listed belowEL Solenoid Replacement Kit 050218 527.00 Ã Ã Ã Ã Ã ÃFor EL Devices shipped before January 1987

Orbit Knob Assy - 606K/880K Trim 108490 Ã Ã 162.00 Ã 162.00 162.00 162.00Orbit Knob Assy - 606K-DT/880K-DT Trim 108493 Ã Ã 162.00 Ã 162.00 162.00 162.00880 Knob Booster Spring Assembly 033024 38.00 Ã Ã Ã Ã Ã ÃFor Trims shipped before October 1989

#22 Hitch Pin - Hex/CD Dogging old style 963909 9.50 Ã Ã Ã Ã Ã ÃDogging Shaft - Hex Dogging Old Style 968112 11.50 Ã Ã Ã Ã Ã ÃCD Actuator Arm - Cylinder Dogg Old Style 968116 10.50 Ã Ã Ã Ã Ã ÃFor Devices shipped before July 1997

7500-373L Retrofit Kit 050124 15.00 Ã Ã Ã Ã Ã ÃFor Devices shipped before August 1997

22/98/9927/-F Btm Latch/Brkt Repl. Kit 050090 Ã Ã 112.00 112.00 112.00 112.00 112.0022/98/9927/-F Top Latch/Brkt Repl. Kit 050091 Ã Ã 112.00 112.00 112.00 112.00 112.0022/98/9927/27-F Latch Mtg. Screws 1 3/4" Dr 900564 9.50 Ã Ã Ã Ã Ã Ã22/98/9927/27-F Latch Mtg. Screws 2 1/4" Dr 900569 9.50 Ã Ã Ã Ã Ã ÃFor Devices shipped before October 1998

Mechanism End Cap Screw Package 900901 Ã Ã 9.50 9.50 11.50 9.50 9.50RX 330/350 Old Style End Cap Mtg. Bracket for Lock Stile 050397 9.50 Ã Ã Ã Ã Ã ÃFor Devices shipped before January 2002

47 Btm Latch Spirol Pin (Pkg of 10) 090062 11.50 Ã Ã Ã Ã Ã ÃFor Devices shipped before April 2003



US3,US15 US26

SPBLK376WDC Rod member Kit 1 3/4" 109113 102.00 Ã Ã Ã Ã Ã376WDC Rod Member Kit 2" Door 900583 Ã 110.00 110.00 110.00 110.00 Ã376WDC Rod Member Kit 2 1/4" Door 109118 149.00 Ã Ã Ã Ã Ã

For Controls shipped before January 2008

List Price

133



Service Replacement Items

List Price


US19,SP4, SP313,SP28, SP10

US10B, US26D US32D US10 US4

US3, US26

99 GBK-CV-WD 050038 Ã 50.00 Ã Ã Ã Ã Ã99 GBK-CV-HM 050039 Ã 50.00 Ã Ã Ã Ã Ã99 GBK-R/M-499F 050040 Ã 72.00 Ã Ã Ã Ã Ã99 GBK-SV 050041 Ã 72.00 Ã Ã Ã Ã Ã99 GBK-R/M-499F 050042 Ã 50.00 Ã Ã Ã Ã ÃXP99 GBK-R 050083 Ã 81.00 Ã Ã Ã Ã ÃXP99 GBK-R-954 050084 Ã 81.00 Ã Ã Ã Ã Ã33A GBK-R 050394 Ã 50.00 Ã Ã Ã Ã Ã33A GBK-SV 050395 Ã 72.00 Ã Ã Ã Ã Ã33A GBK-CV 050396 Ã 50.00 Ã Ã Ã Ã Ã99 HINGE STILE SHIM 971010 Ã 37.00 Ã Ã Ã Ã Ã

134



Part Number Cross Reference

011213011214011223011224011233011234011243011244011253011254011263011264011273011274011283011284050361061420062370090058

100511100693100729100744100751

100999101000101011101134101137101149101190101444101445101590101593101594101598101599101648101662101665101686101689101695101695101698101698101701101704101707101710101713101716101750101751101752101753101777

050342050338050343050339050340050336050341050337050350050346050351050347050348050344050349050345050360050005050459090065050200050209050439050438050497050442050443050201050112050136050368050367050444050445050498050424050425050426050427050482050409050410050413050414050420050422050421050423050417050419050415050416050435050436050460050461050471050472050455

101801101907102274102277102551102676102681102685102691102694102701102703102930103234104154104164104165104367104759105020105163105641105666106118106122106144106145106147106174106180106708106708106708106708106708106708106708106708106725106725106725106725106725106725106725106725106847106763106763106763106763106765106765106765106765106767106767106767106767

050456050418050139050137

050036050462050463050432050430050431050446050202

114141050455050411

050428050429050210050053050457050110

050096050458050440050441050372050374050373050437050452050295050296050297050298050303050304050305050306050299050300050301050302050307050308050309050310050412050311050313050319050321050312050314050320050322050315050317050323050325

106769106769106769106769106780107021107023107682107798108327108360108361108994108994108995108995109041109160109759109760109811

109826109861110007110008110051110052110058110163110165110375110416110472110525110573110574110658110740110741110767110783110845111645111651111657111669111675111795111928111930111931111932111933111934111935111936111937111938111939

050316050318050324050326050493050750050592050451050456050402050513050515

PBKIT.1001PBKIT.1002PBKIT.1003PBKIT.1004

050537050128050492050754900620050366050357050531050532050401050400050402050756050757050574050582050544110769050512050514050545050536050534971012971012113098050752050758050760050762050764101030050572050573050197050196050189050191050184050183050198050199050194

111940111941111942111948111949111950112342112461112727112906112907112910112915112924112925113004113005113006113007113078113079113080113081113125113126113129113130113133113134114169

945501950522951081951780951960951970952400952530956011

956520957750958643959098959122959707959850959853959957959958959969959986959990959991959995960049960303960345960548960577

050195050192050193113100

050506050504050575111869

050491050494050495050583050535050401050400050732050733050734050736050737050738050739050741

050548050549050550050551050552050553050516090001090012050476090013050501050502050448050447

PKGSRV.1018090020050278090014113853

972466971593050352050353050355050332050364050333090023050356050334090030970488050503050464050279

OLD P/N NEW P/N OLD P/N NEW P/N OLD P/N NEW P/N OLD P/N NEW P/N

135



OLD P/N NEW P/N OLD P/N NEW P/N OLD P/N NEW P/N OLD P/N NEW P/N960578 050327 966165 050370 969520 050529 971056 050563960581 050453 966384 050607 969582 090076 971267 050525960652 050277 966450 971614 969816 050601 971308 090038960675 050499 966897 050541 969836 050555 971326 050538960756 050211 967032 050490 969837 050555 971348 090088960856 050260 967116 090069 969838 050556 971351 090039961152 050369 967151 051705 969839 050556 971367 090047961206 050465 967154 051707 969855 050566 971424 050275961218 050478 967224 090011 969864 050564 971425 050276961628 050453 967448 090064 969925 972466 971483 050566961814 050272 967481 090097 969987 050530 971492 090040961988 900614 967482 050607 969994 050474 971495 090043963011 900502 967484 050599 969995 050475 971496 090045963019 090035 967489 050606 970079 090048 971507 090031963094 090024 967490 050609 970086 050555 971507 050585963096 090025 967492 050600 970087 050555 971537 090072963098 900610 967493 050602 970088 050556 971560 050406963099 090002 967495 090096 970089 050556 971561 050407963100 050613 967496 090090 970126 970387 971562 050570963103 090015 967502 050354 970148 970388 971564 050569963128 090059 967616 050328 970173 968694 971567 050546963130 090032 967622 050454 970180 971556 971568 050481963155 090061 967623 050454 970181 971557 971583 050611963193 090016 967644 050598 970184 050621 971583 PKGSRV.1010963512 090100 967648 050612 970193 050488 971584 090070963531 050614 967673 090095 970194 050489 971625 050554963585 090010 967736 050004 970206 050554 971627 050559963712 900613 967738 050004 970207 050554 971628 050560963750 090018 967826 090065 970208 050554 971629 050562963757 090103 967968 090062 970368 050547 971630 050562963760 090098 968503 050508 970441 090074 971631 050563963789 090027 968638 050486 970527 050557 971632 050563963935 090054 968639 050487 970528 050558 971635 050397964041 090077 968762 968793 970547 971822 971638 050565964066 090107 968833 050449 970549 900588 971781 050559964085 090063 968834 090056 970567 050616 971782 050560964154 090102 968862 050597 970597 050557 971796 050507964358 900541 968863 050596 970598 050557 971837 090046964360 090034 968868 050619 970599 050557 971838 090044964363 050509 968957 090057 970601 050558 971910 050524964390 090037 968964 090058 970602 050558 971974 050526964395 090055 968969 090067 970603 050558 971993 090049964557 090073 969199 050361 970719 090036 971493 090041965278 050360 969219 050603 970771 090068 971494 090042965279 050359 969235 050542 970815 050576 990592 050540965294 090033 969244 050543 970817 050358 990598 050539965300 050362 969252 090071 970863 972549 990598 050539965301 050363 969295 971010 970873 970872965322 090009 969297 090075 970909 050500965325 050273 969300 661481 970911 050559965326 050274 969400 969889 970912 050559965335 090017 969369 050477 970914 050560965506 050505 969400 969889 970915 050560965676 090021 969467 090079 971050 090066965916 090092 969855 050566 971052 050562965917 090091 969864 050564 971053 050562

965996 050331 969506 050566 971055 050563

136



137



138



WarrantyWarranty: The Company warrants that the product manufactured by it and delivered hereunder will be free of defects in material and workmanship for a period as follows: (1) exit devices and trim for 36 months from the date of placing the product in operation or for 42 months from the date of shipment; and (2) , and electrified exit devices and other electrified products for 12 months from the date of placing the product in operation or 18 months from the date of shipment, whichever shall first occur. The Purchaser shall be obligated to promptly report any failure to conform to this limited warranty, in writing, to the Company within said limited warranty period, whereupon the Company shall, at its option, correct such nonconformity, by suitable repair to such product or, furnish a replacement part F.O.B. point of shipment; provided the Purchaser has stored, installed,maintained and operated such product in accordance with good industry practices and has complied with specific recommendations of the Company. Accessories or product furnished by the Company, but manufactured by others, shall carry whatever warranty the manufacturers have conveyed to the Company and which can be passed on to the Purchaser. The Company shall not be liable for any repairs, replacements, or adjustments to the product or any costs of labor performed by the Purchaser or others without the Company’s prior written approval.

The effects of corrosion, erosion and normal wear and tear are specifically excluded from this limited warranty. Performance warranties are limited to those specifically stated within the Company’s proposal. Unless responsibility for meeting such performance warranties are limited to specified shop or field tests, the Company’s obligation shall be to correct in the manner and for the period of time provided above.

The Company makes no other warranty or representation of any kind whatsoever, expressed or implied, except that of title, and all implied warranties of merchantability and fitness for a particular purpose, are hereby disclaimed. No agent, representative, dealer, or employee of Company has the authority to increase or alter the obligations of this limited warranty.

Correction by the Company of nonconformities whether patent or latent, in the manner and for the period of time provided above, shall constitute fulfillment of all liabilities of the Company for such nonconformities, whether based on contract, warranty, negligence, indemnity, strict liability or otherwise with respect to or arising out of such Equipment.

The Purchaser shall not operate product which is considered to be defective, without first notifying the Company in writing of its intention to do so. Any such use of product will be at the Purchaser’s sole risk and liability and will not be covered by this limited warranty.

Customer Care: 877-671-7011

RMA requests (Return Material Authorization) are to be directed to Von Duprin, 2720 Tobey Drive, Indianapolis, IN 46219. Attn: Customer Service.

About Allegion

Allegion (NYSE: ALLE) creates peace of mind by pioneering safety and security.

As a $2 billion provider of security solutions for homes and businesses, Allegion

employs more than 7,800 people and sells products in more than 120 countries

across the world. Allegion comprises 23 global brands, including strategic

brands CISA®! �>ciZgÒZm®, LCN®, Schlage® and Von Duprin®.

For more, visit www.allegion.com

© 2014 Allegion 010058, Rev. 03/14allegion.com/us

Documents

Von Duprin Price Book 2014- 4/14 Update