Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
*Photo may include optional equipment.
We build a better future
Material Handler
Pride at Work
R210W-9 MH, purpose-built NEW excavator for the waste and recycling environment
The hydraulic elevating cab provides the comfort of operating from a raised position ensuring an improved vision and safety.
Larger working range and exceptional stability offer high productivity in a challenging environment.
*Photo may include optional equipment.
Material Handler
Indicated for max. operation stabillity when lifting.
Can be mounted on the front and rear.
Specifications
MODEL
Type
Rated
flywheel
horsepower
Max. torque
Bore X stroke
Piston displacement
Batteries
Starting motor
Alternator
81.4 kgf.m(589 lbf.ft) at 1,400 rpm
107 x 124 mm (4.2” x 4.9”)
6,700 cc (409 in3)
2 x 12 V x 100 AH
24V-4.5kW
24V-70Amp
DIN
SAEJ1995 (gross)
J1349 (net)
6271/1 (gross)
6271/1 (net)
Water-cooled, 4-cycle diesel,
6-cylinder in-line, Direct injection,
Turbocharged, Charge air cooled,
Low emission
176 HP (131kW) at 1,900 rpm
165 HP (123kW) at 1,900 rpm
178 PS (131kW) at 1,900 rpm
167 PS (123kW) at 1,900 rpm
Cummins QSB 6.7
ENGINE
SWING SYSTEMSwing motor
Swing reduction
Swing bearing lubrication
Swing brake(option)
Swing speed
Axial piston motor
2-Stage planetary
Grease-bathed
Multi wet disc(pin lock type)
10.3 rpm
CONTROLPilot pressure operated joysticks and pedals with detachable lever provide almost
effortless and fatigueless operation.
Pilot control
Engine throttle
Two joysticks with one safety lever
(LH): Swing and arm, (RH): Boom and grapple (ISO)
Electric, Dial type
MAIN PUMP
Type
Rated flow
Sub-pump for pilot circuit
Cross-sensing and fuel saving pump system
Two variable displacement piston pumps
2 X 228 L /min (60.2 US gpm/50.2 UK gpm)
Gear pump
HYDRAULIC SYSTEM
HYDRAULIC MOTORS
Travel
Swing
Two-speed axial pistons motor
with brake valve
Axial piston motor with automatic brake
RELIEF VALVE SETTING
Implement circuits
Travel
Power boost (boom, arm, bucket)
Swing circuit
Pilot circuit
Service valve
350 kgf/cm2 (4,980 psi)
380 kgf/cm2 (5,400 psi)
380 kgf/cm2 (5,400 psi)
265 kgf/cm2 (3,770 psi)
40 kgf/cm2 (570 psi)
Installed
HYDRAULIC CYLINDERS
No. of cylinder
bore X stroke
Boom : 2-120 x 1,290 mm (4.7” x 50.8”)
Arm : 1-140 x 1,478 mm (5.5” x 58.2”)
Cabin elevating : 2-80 X 660 mm (3.1” X 26.0”)
DRIVES & BRAKESFully hydrostatic type
Axial piston motor, bent axis design
10,800 kgf (23,800 lbf)
33 km/hr (20.5 mph) / 8.5 km/hr (5.3 mph)
31.5O (61 %)
Multi wet disc
Drive method
Drive motor
Max. drawbar pull
Max. travel speed(high) / (low)
Gradeability
Parking brake
AXLE & WHEELFull floating front axle is supported by center pin for oscillation. It can be locked by
oscillation lock cylinders. Rear axle is fixed on the lower chassis.
Tires
(optional)
10.00-20-14PR, Dual(tube type)
10.00-20, Dual(solid type)
Outrigger
UNDERCARRIAGEReinforced box-section frame is all-welded, low-stress.
Outriggers are available. A pin-on design.
STEERING SYSTEMHydraulically actuated, orbitrol type steering system actuates on front wheels
through the steering cylinders.
Min. turning radius 7,200 mm (23’ 7”)
liter
310
35
24
5
14.6
18.5
340
165
2.5
US gal
81.9
9.2
6.3
1.3
3.9
4.9
89.8
43.6
0.66
UK gal
68.2
7.7
5.28
1.1
3.2
4.1
74.8
36.3
0.55
COOLANT & LUBRICANT CAPACITYRe-filling
Fuel tank
Engine coolant
Engine oil
Swing device - gear oil
Front
Rear
Hydraulic system (including tank)
Hydraulic tank
Transmission
Axle
MAJOR COMPONENT WEIGHT
Upperstructure (cabin elevating)
Two-piece front
4-Outrigger(front and rear outrigger)
Orange grapple
9,470kg (20,880lb)
2,990kg (6,590lb)
24,680kg (54,410lb)
1,200kg (2,650lb)
OPERATING WEIGHT (APPROXIMATE)Operating weight, including 6,500mm (21’ 4”) boom, 4,500mm (14’ 9”) arm,
lubricant, coolant, full fuel tank, hydraulic tank and the standard equipment.
12 m
(39.4 ft)
9 m
(29.5 ft)
6 m
(19.7 ft)
3 m
(9.8 ft)
1.5 m
(4.9 ft)
Ground
Line
-1.5 m
(-4.9 ft)
-3 m
(-9.8 ft)
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
kg
lb
*3150
*6945
*4753
*10480
*6437
*14190
*3150
*6945
*4753
*10480
*6437
*14190
*8225
*18132
*9193
*20268
*9362
*20641
*8737
*19263
*7453
*16430
*8225
*18132
*9193
*20268
*9362
*20641
*8737
*19263
*7453
*16430
*4839
*10669
*5121
*11289
*6224
*13722
*6705
*14781
*6855
*15113
*6563
*14468
*5773
*12726
*4839
*10669
*5121
*11289
*6224
*13722
6520
14375
6280
13844
6157
13574
*5773
*12726
*4499
*9919
*4541
*10011
*5080
*11200
*5306
*11698
*5351
*11796
*5110
*11266
*4477
*9871
*4499
*9919
*4541
*10011
4930
10870
4749
10471
4608
10159
4528
9983
*4477
*9871
*4102
*9043
*4312
*9507
*4380
*9656
*4314
*9511
*4014
*8848
*3310
*7297
3935
8674
3762
8293
3662
8073
3583
7900
3544
7813
*3310
*7297
*3689
*8132
*3617
*7975
*3387
*7467
2975
6560
2931
6461
2902
6397
*7345
*16194
*4394
*9686
*3827
*8437
*3528
*7778
*3390
*7473
*3226
*7111
*3001
*6617
*2660
*5863
*7345
*16194
*4394
*9686
3231
7124
2830
6239
2785
6140
2830
6240
2979
6568
*2660
*5863
4.03
(13.23)
8.29
(27.19)
10.12
(33.19)
10.84
(35.57)
10.88
(35.69)
10.7
(35.11)
10.3
(33.8)
9.65
(31.67)
Lifting CapacityR210W-9 MH Rating over-front Rating over-side or 360 degree
Load point
height
m (ft)
Load radius
3 m (9.8 ft) 4.5 m (14.8 ft) 6 m (19.7 ft) 7.5 m (24.6 ft) 9 m (29.5 ft) 10.5 m (34.4 ft) Capacity Reach
m (ft )
At max. reach
Boom : 6.5 m (21’ 4”) / Arm : 4.5 m (14’ 9”) / 4-Outrigger Down / 2 m (6’ 7”) Cabin Elevating
Lifting capacity is based on SAE J1097, ISO 10567.
2. Lifting capacity of the Robex Series does not exceed 75% of the tipping load with
the machine on firm, level ground or 87% of full hydraulic capacity.
3. The load point is a hook located on the back of the bucket.
4. (*) indicates the load limited by hydraulic capacity.
Dimensions & Working Range
WORKING RANGE
Boom Length
Arm Length
A. Max Working Reach
B. Max Working Height
C. Max Working Depth
6,500 (21' 4")
4,500 (14' 9")
11,000 (36' 1")
12,650 (41' 6")
4,710 (15' 5")
(Unit : mm,ft.in)
DIMENSIONS (Unit : mm,ft.in)
3720(1
2’ 2”)
1920(6
’ 4”)
3180(1
0’ 5”)
5100(1
6’ 9”)
1305(4
’ 3”)
2765(9’ 1”)
2800(9’ 2”)
9600(31’ 6”)3770(12’ 4”)
2490(8’ 2”)
1874(9’ 2”)
3350(1
0’ 12”)
B
C
A
B
H
H1
A
CB
A
HH
1
B
H
C
A
B
A
H
H1
C
Attachment Selection
ORANGE GRAPPLE
CLAMSHELL BUCKET
WOOD GRAPPLE
BEAM GRAPPLE
* Pendulum Type
* Rotating Options : Hydraulic Rotating Type, Free Rotating Type, Fixed Type available
* Number of Tines : 4 / 5 / 6
* Tines Options : Close Type, Semi-close Type, Open Type
* Pendulum Type
* Rotating Options : Hydraulic Rotating Type, Free Rotating Type, Fixed Type available
* Teeth can be installde as Option. Standard Clamshell has no teeth.
* Pendulum Type
* Rotating Type
* Pendulum Type
* Rotating Options : Hydraulic Rotating Type, Fixed Type available
Operating Weight
Capacity
A
B
C
H
H1
Available Excavator
Standard Tines NO.
Operating Pressure
Oil Flow Rate
kg
m3
mm
mm
mm
mm
mm
ton
-
kg / psi
LPM / GPM
kg / psi
LPM / GPM
RPM
1,200
0.7
1,820
1,290
-
1,630
1,905
18 ~ 25
5
280 / 3,983
200 ~250 / 52.8 ~ 66.1
160 / 2,276
~ 40 / ~ 10.5
16 ~ 18
1,000
0.6
1,520
304
521
1,724
-
18 ~ 25
-
280 / 3,983
200 ~ 250 / 52.8 ~ 66.1
120 / 1,707
~ 30 / ~ 7.9
16 ~18
980
0.7
2,000
1,715
800
1,400
2,094
18 ~ 25
-
280 / 3,983
200 ~ 250 / 52.8 ~ 66.1
120 / 1,707
~ 30 / ~ 7.9
16 ~ 18
960
-
1,830
530
670
1,840
2,120
18 ~ 25
-
280 / 3,983
200 ~ 250 / 52.8 ~ 66.1
120 / 1,707
~ 30 / ~ 7.9
16 ~18
Rotating Hydraulic MotorMotor Setting Pressure
Motor Oil Flow Rate
Revolving Speed
SPECIFICATION
Description Unit Orange Grapple(HDSG800)
Wood Grapple(HDWP800)
Clamshell Bucket(HDCB800)
Beam Grapple(HDBG800)
PLEASE CONTACT
OPTIONAL EQUIPMENT
Fuel filler pump (50 L/min)
Beacon lamp
Cabin FOPS/FOG (ISO/DIS 10262 Level II)
FOPS (Falling Object Protective Structure)
FOG (Falling Object Guard)
Climate control
Air conditioner only
Heater only
Cabin roof-steel cover
Cabin front guard-wire net
Cabin lights
Cabin front window rain guard
Lower frame under cover (Additional)
Tool kit
Operator suit
Rearview camera
Seat
Mechanical suspension seat with heater
Tires - dual (10.00 - 20 solid)
Fenders (Mudguards)
Hi-mate (Remote Management System)
* Standard and optional equipment may vary. Contact your Hyundai dealer for
more information. The machine may vary according to international standards.
* The photos may include attachments and optional equipment that are not
available in your area.
* Materials and specifications are subject to change without advance notice.
* All imperial measurements rounded off to the nearest pound or inch.
STANDARD EQUIPMENT
ISO Standard cabin
All-weather steel cab with 360O visibility
Safety glass windows
Rise-up type windshield wiper
Sliding fold-in front window
Sliding side window(LH)
Sun visor
Lockable door
Hot & cool box
Storage compartment & Ashtray
Cabin roof-cover transparent
Radio & USB Player
12 volt power outlet (24V DC to 12V DC converter)
Computer aided power optimization (New CAPO) system
3-power mode, 2-work mode, user mode
Auto deceleration & one-touch deceleration system
Auto warm-up system
Auto overheat prevention system
Automatic climate control
Air conditioner & heater
Defroster
Self-diagnostics system
Starting Aid (air grid heater) for cold weather
Centralized monitoring
LCD display
Engine speed or Trip meter/Accel.
Clock
Gauges
Fuel level gauge
Engine coolant temperature gauge
Hyd. oil temperature gauge
Warnings
Check Engine
Communication error
Low battery
Air cleaner clogging
Indicators
Max power
Low speed/High speed
Fuel warmer
Auto idle
Door and cab locks, one key
Four outside rearview mirrors
Fully adjustable suspension seat with seat belt
Pilot-operated slidable joystick
Two front working lights
Electric horn
Batteries (2 x 12V x 100 AH)
Battery master switch
Removable clean-out dust net for cooler
Automatic swing brake
Removable reservoir tank
Fuel pre-filter with fuel warmer
Boom holding system
Arm holding system
Accumulator for lowering work equipment
Electric Transducer
Lower frame under cover (Normal)
Tires-dual (10.00-20-14PR)
Travel alarm
Boom
6.5m, 21’ 4”
Arm
4.5m, 14’ 9”
Undercarriage
Front and rear outrigger
6100 Atlantic Blvd Norcross, GA 30071
TEL: (678) 823 7777 FAX: (678) 823 7778
www.hceamericas.com 2012.13 Rev. 2