• Home

  • Documents

  • Welcome to Petroleum and Natural Gas Regulatory Board, India€¦ · 11. The line pressure shall...
8

Welcome to Petroleum and Natural Gas Regulatory Board, India€¦ · 11. The line pressure shall not exceed 1 10 mbar. The diameter of pipe shall not exceed 63mm. Pipe shall be laid

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Welcome to Petroleum and Natural Gas Regulatory Board, India€¦ · 11. The line pressure shall not exceed 1 10 mbar. The diameter of pipe shall not exceed 63mm. Pipe shall be laid
Page 2: Welcome to Petroleum and Natural Gas Regulatory Board, India€¦ · 11. The line pressure shall not exceed 1 10 mbar. The diameter of pipe shall not exceed 63mm. Pipe shall be laid
Page 3: Welcome to Petroleum and Natural Gas Regulatory Board, India€¦ · 11. The line pressure shall not exceed 1 10 mbar. The diameter of pipe shall not exceed 63mm. Pipe shall be laid
Page 4: Welcome to Petroleum and Natural Gas Regulatory Board, India€¦ · 11. The line pressure shall not exceed 1 10 mbar. The diameter of pipe shall not exceed 63mm. Pipe shall be laid
Page 5: Welcome to Petroleum and Natural Gas Regulatory Board, India€¦ · 11. The line pressure shall not exceed 1 10 mbar. The diameter of pipe shall not exceed 63mm. Pipe shall be laid
Page 6: Welcome to Petroleum and Natural Gas Regulatory Board, India€¦ · 11. The line pressure shall not exceed 1 10 mbar. The diameter of pipe shall not exceed 63mm. Pipe shall be laid
Page 7: Welcome to Petroleum and Natural Gas Regulatory Board, India€¦ · 11. The line pressure shall not exceed 1 10 mbar. The diameter of pipe shall not exceed 63mm. Pipe shall be laid
Page 8: Welcome to Petroleum and Natural Gas Regulatory Board, India€¦ · 11. The line pressure shall not exceed 1 10 mbar. The diameter of pipe shall not exceed 63mm. Pipe shall be laid

  · Web viewBarrel: Minimum 4-1/2 inches (114.3 mm) O.D. and 0.120 inch (3.1 m) wall thickness structural steel pipe. Deflection of pipe under full load shall not exceed 0.03 inch

  · Web viewBarrel: Minimum 4-1/2 inches (114.3 mm) O.D. and 0.120 inch (3.1 m) wall thickness structural steel pipe. Deflection of pipe under full load shall not exceed 0.03 inch

Documents
MODELS INSTALLATION, OPERATION & 1603HSID … Series IOM.pdf · Steam riser(s) and header shall be 2½” pipe size. 9. Equalizer line shall be minimum 1½” pipe size. 10. The near

MODELS INSTALLATION, OPERATION & 1603HSID … Series IOM.pdf · Steam riser(s) and header shall be 2½” pipe size. 9. Equalizer line shall be minimum 1½” pipe size. 10. The near

Documents
FIRE PROTECTION & LIFE SAFETY DESIGN MANUAL  · Web viewThe calculated pipe velocity shall not exceed 20 ft/sec (6.1 m/sec). ... Each exit sign shall have the word, "EXIT" in plain,

FIRE PROTECTION & LIFE SAFETY DESIGN MANUAL  · Web viewThe calculated pipe velocity shall not exceed 20 ft/sec (6.1 m/sec). ... Each exit sign shall have the word, "EXIT" in plain,

Documents
· Web viewSolvent weld PVC pipe, if and when used in construction of this system, shall be rigid PVC pipe and shall be assembled using appropriate PVC pipe cleaner / primer and solvent

· Web viewSolvent weld PVC pipe, if and when used in construction of this system, shall be rigid PVC pipe and shall be assembled using appropriate PVC pipe cleaner / primer and solvent

Documents
NFPA Updates - FAMA · • This is not an official NFPA presentation ... –Exhaust temperature shall not exceed 851° F when measured at the exit of the exhaust pipe during normal

NFPA Updates - FAMA · • This is not an official NFPA presentation ... –Exhaust temperature shall not exceed 851° F when measured at the exit of the exhaust pipe during normal

Documents
Philadelphia University50-minute lecture/tutorial. Attendance policy: Absence from lectures and/or tutorials shall not exceed 15%. Students who exceed the 15% limit without a medical

Philadelphia University50-minute lecture/tutorial. Attendance policy: Absence from lectures and/or tutorials shall not exceed 15%. Students who exceed the 15% limit without a medical

Documents
401 PIPE AND FITTINGS FOR SANITARY SEWERS …...401.01.02B CONCRETE PIPE NON-REINFORCED CONCRETE PIPE Non-reinforced concrete pipe shall conform to ASTM C 14 and the following additional

401 PIPE AND FITTINGS FOR SANITARY SEWERS …...401.01.02B CONCRETE PIPE NON-REINFORCED CONCRETE PIPE Non-reinforced concrete pipe shall conform to ASTM C 14 and the following additional

Documents
GENERAL NOTES: INTAKE PIPE SIZE TABLE (SEE NOTE 8) PIPE ... · general notes: 1. all interconnecting pipe and fittings shall be installed by the contractor. 2. all piping shall be

GENERAL NOTES: INTAKE PIPE SIZE TABLE (SEE NOTE 8) PIPE ... · general notes: 1. all interconnecting pipe and fittings shall be installed by the contractor. 2. all piping shall be

Documents
FUSIBLE PVC PIPE INSTALLATIONS EXCEED 1.3 MILLION FEET …

FUSIBLE PVC PIPE INSTALLATIONS EXCEED 1.3 MILLION FEET …

Documents
Part 1 General 1.1 DESCRIPTION OF WORK - Manitoba · PDF file · 2017-09-06.1 PVC PIPE - The pipe shall be ... resin chunks or other imperfections. The pipe shall be uniform in colour,

Part 1 General 1.1 DESCRIPTION OF WORK - Manitoba · PDF file · 2017-09-06.1 PVC PIPE - The pipe shall be ... resin chunks or other imperfections. The pipe shall be uniform in colour,

Documents
Conformity of TGS5042 to EN50545-1 Requirements · 2018. 12. 1. · 4 6.3 Linearity Requirement The deviation shall not exceed the values specified in Table 4 and shall not exceed

Conformity of TGS5042 to EN50545-1 Requirements · 2018. 12. 1. · 4 6.3 Linearity Requirement The deviation shall not exceed the values specified in Table 4 and shall not exceed

Documents
Development Construction Specification C213 - Earthworks2. The maximum height of stockpiles shall not exceed 2.5 m and the maximum batter slope shall not exceed 2:1. Height and Batter

Development Construction Specification C213 - Earthworks2. The maximum height of stockpiles shall not exceed 2.5 m and the maximum batter slope shall not exceed 2:1. Height and Batter

Documents
advancemechanicaldesign.comadvancemechanicaldesign.com/syllabus-pdf/piping-design-syllabus.pdf · 2. Shall apply ... Pipe Stress Analysis - Caeser Il : Introduction to Pipe Stress

advancemechanicaldesign.comadvancemechanicaldesign.com/syllabus-pdf/piping-design-syllabus.pdf · 2. Shall apply ... Pipe Stress Analysis - Caeser Il : Introduction to Pipe Stress

Documents
CANYON LAKE WATER SERVICE COMPANY...accordance with NACE Standard RP0188. Non-destructive holiday detector shall not exceed 67.5 volts, nor shall destructive holiday detector exceed

CANYON LAKE WATER SERVICE COMPANY...accordance with NACE Standard RP0188. Non-destructive holiday detector shall not exceed 67.5 volts, nor shall destructive holiday detector exceed

Documents
PPR fitting,PPR pipe,CPVC Pipe - Plastics piping systems for hot … · 2020. 5. 26. · 4.1 Pipe material The pipe material from which the pipe is made shall comply with ISO 15874-1:2013,

PPR fitting,PPR pipe,CPVC Pipe - Plastics piping systems for hot … · 2020. 5. 26. · 4.1 Pipe material The pipe material from which the pipe is made shall comply with ISO 15874-1:2013,

Documents
Submerged-Are-Welded Steel Pipe · SUBMERGED-ARe-WELDED STEEL PIPE ENGINEERING EQUIPMENT SPECIFICATION EES102 -2010 4.2 Joinability 4.2.1 Weldability: Additional ~ ENBRIDG Pipe shall

Submerged-Are-Welded Steel Pipe · SUBMERGED-ARe-WELDED STEEL PIPE ENGINEERING EQUIPMENT SPECIFICATION EES102 -2010 4.2 Joinability 4.2.1 Weldability: Additional ~ ENBRIDG Pipe shall

Documents
SECTION 15062 DUCTILE IRON PIPE AND FITTINGS · all pipe and fittings. All ductile iron pipe and fittings shall be delivered to ... American Public Works Association's "Utility Locating

SECTION 15062 DUCTILE IRON PIPE AND FITTINGS · all pipe and fittings. All ductile iron pipe and fittings shall be delivered to ... American Public Works Association's "Utility Locating

Documents
raynor.com · Web viewDeflection of pipe under full load shall not exceed 0.03 inch (0.8 mm) per foot of span. Counterbalance: Provide counterbalance mechanism with helical torsion

raynor.com · Web viewDeflection of pipe under full load shall not exceed 0.03 inch (0.8 mm) per foot of span. Counterbalance: Provide counterbalance mechanism with helical torsion

Documents
CITY OF LINCOLN, NEBRASKA, STANDARD SPECIFICATIONS … · 1. Polyvinyl Chloride (PVC) Pressure Pipe . PVC pressure pipe shall be cast iron pipe size O.D., meeting the requirements

CITY OF LINCOLN, NEBRASKA, STANDARD SPECIFICATIONS … · 1. Polyvinyl Chloride (PVC) Pressure Pipe . PVC pressure pipe shall be cast iron pipe size O.D., meeting the requirements

Documents
Boreline Flexible Drop Pipe - Technosub€¦ · Boreline Flexible Drop Pipe Installation Procedure ... Material The Flexible Drop Pipe shall be constructed from high-tenacity polyester

Boreline Flexible Drop Pipe - Technosub€¦ · Boreline Flexible Drop Pipe Installation Procedure ... Material The Flexible Drop Pipe shall be constructed from high-tenacity polyester

Documents
Small Diameter N-12 Pipe and Fittings Brochure 6 page 04-19 Diameter N-12 Pipe and Fittings...N-12 WT pipe and fittings meet or exceed watertight requirements of ASTM D3212 – the

Small Diameter N-12 Pipe and Fittings Brochure 6 page 04-19 Diameter N-12 Pipe and Fittings...N-12 WT pipe and fittings meet or exceed watertight requirements of ASTM D3212 – the

Documents
HOBAS PIPE · PDF fileHOBAS PIPE USA 800-856-7473 ... The structural fiberglass lamination is very strong and will typically equal or exceed the tensile strength of the pipe itself

HOBAS PIPE · PDF fileHOBAS PIPE USA 800-856-7473 ... The structural fiberglass lamination is very strong and will typically equal or exceed the tensile strength of the pipe itself

Documents
رتسگ کین یتعنص تلاآریش هعسوت هورگ · exceed 100 ppm of chloride content and not to exceed 50ºC. ‐ The seat sealing surface / closure shall be free from

رتسگ کین یتعنص تلاآریش هعسوت هورگ · exceed 100 ppm of chloride content and not to exceed 50ºC. ‐ The seat sealing surface / closure shall be free from

Documents
S3 Technologiess3tasia.com/datasheet/SmartPaveHP.pdf · 2019. 6. 27. · Shall not exceed 1.5 g weight loss per 1000 cycles Peneration depth shall not exceed 5 mm No cracking, softening

S3 Technologiess3tasia.com/datasheet/SmartPaveHP.pdf · 2019. 6. 27. · Shall not exceed 1.5 g weight loss per 1000 cycles Peneration depth shall not exceed 5 mm No cracking, softening

Documents
Standard Specifications for Subdivision Waterline Construction …tpcw.org/.../Subdivision-Waterline-Construction-Specs.pdf · 2004-10-01 · DUCTILE IRON PIPE: 2.4.1 Pipe shall be

Standard Specifications for Subdivision Waterline Construction …tpcw.org/.../Subdivision-Waterline-Construction-Specs.pdf · 2004-10-01 · DUCTILE IRON PIPE: 2.4.1 Pipe shall be

Documents
  · Web viewTotal amount payable to the Consultant shall not exceed [$xxx] and with a performance period of the contract not to exceed 5 years including any amendments

  · Web viewTotal amount payable to the Consultant shall not exceed [$xxx] and with a performance period of the contract not to exceed 5 years including any amendments

Documents
ARKANSAS - International Code Council Codes/Arkansas/AR_Plu… · this code shall apply. 303.3 Plastic pipe, fittings and components. All plastic pipe, fittings and components shall

ARKANSAS - International Code Council Codes/Arkansas/AR_Plu… · this code shall apply. 303.3 Plastic pipe, fittings and components. All plastic pipe, fittings and components shall

Documents
Specification for Seamless Line Pipe - Engineering Experts · Pipe shall be manufactured in accordance with API Spec 5L for seamless quenched and tempered line pipe. Exceptions and/or

Specification for Seamless Line Pipe - Engineering Experts · Pipe shall be manufactured in accordance with API Spec 5L for seamless quenched and tempered line pipe. Exceptions and/or

Documents
GRAVITY SEWER - URBACA...All pipe and fittings shall meet the requirements of ASTM D3034 for 4" through 15" SDR 35/26 and F679 for 18" through 36" 46PS/115PS sewer pipe. The pipe shall

GRAVITY SEWER - URBACA...All pipe and fittings shall meet the requirements of ASTM D3034 for 4" through 15" SDR 35/26 and F679 for 18" through 36" 46PS/115PS sewer pipe. The pipe shall

Documents
Tender for Supply of Pipes & Fittings on Annual Rate … · 12 Sch 80 CPVC Pipe 200 NB; Pipes shall meet or exceed the requirements of ASTM F441 Make: Astral Chempro/ Any approved

Tender for Supply of Pipes & Fittings on Annual Rate … · 12 Sch 80 CPVC Pipe 200 NB; Pipes shall meet or exceed the requirements of ASTM F441 Make: Astral Chempro/ Any approved

Documents