WHOLESALE CATALOGUE - Tesrol · ELEGANCE - 400 SERIES - DESIGNS & EDGES 418 419 SELECT EDGE FROM PAGE 9 SCALE 1:1 MINIMuM HEIGHT OR WIDTH 236mm (Leaves 20mm …

www.tesrol.com.au

PRODUCT DATA CATALOGUE

WHOLE

SALE

JULY 2016

2P: 1300 837 765 E: [email protected]

Finishes available with designs On this Page:

• RouteredDoors-ALLfinishes

• VacuumFormedDoors-ALLfinishes

• 2PackPainted-Standardfinishes

• HandPainted-ByCabinetmaker

THICKNESS’AVAILABLE:18,21,25and32mm

Allminimumsizesleaveapproximately20mmpanel

MODERNLINE - 100 SERIES - DESIGNS & EDGES

lMinimumSize-30mm

OrderCode:

DESIGN-EDGE 100-3S

approx. 2mm radius

EP 3S

100 - 3S

lMinimumSize-40mm

OrderCode:

DESIGN-EDGE 100-2

EP 2

100 - 2

lMinimumSize-30mm

OrderCode:

DESIGN-EDGE 100-3

approx. 5mm radius

EP 3

100 - 3

lMinimumSize-40mm

OrderCode:

DESIGN-EDGE 100-4

EP 4

100 - 4

lMinimumSize-50mm

OrderCode:

DESIGN-EDGE 100-5

EP 5

100 - 5

lMinimumSize-40mm

OrderCode:

DESIGN-EDGE 100-6

approx. 8mm radius

EP 6

100 - 6

lMinimumSize-70mm

OrderCode:

DESIGN-EDGE 100-14

EP 14

100 - 14

lMinimumSize-70mm

OrderCode:

DESIGN-EDGE 100-19

EP 19

100 - 19

lMinimumSize-80mm

OrderCode:

DESIGN-EDGE 100-17

EP 17

100 - 17

lMinimumSize-70mm

OrderCode:

DESIGN-EDGE 100-16

EP 16

100 - 16

lMinimumSize-60mm

OrderCode:

DESIGN-EDGE 100-15

EP 15

100 - 15

SCALE 1:1 SCALE 1:1

SCALE 1:1SCALE 1:1

SCALE 1:1

SCALE 1:1

SCALE 1:1

SCALE 1:1

SCALE 1:1SCALE 1:1 SCALE 1:1

SCALE1:1drawingsareapproximatesizesonlyNOTE:Somemodificationsarepossibleonrequest

3 P: 1300 837 765 E: [email protected]

TRADITIONAL - 200 SERIES - DESIGNS & EDGES

lMinimumSize-60mm

OrderCode:

DESIGN-EDGE 219-3S

approx. 2mm radius

EP 3S

219 - 3S

lMinimumSize-70mm

OrderCode:

DESIGN-EDGE 219-2

EP 2

219 - 2

lMinimumSize-60mm

OrderCode:

DESIGN-EDGE 219-3

approx. 5mm radius

EP 3

219 - 3

lMinimumSize-72mm

OrderCode:

DESIGN-EDGE 219-4

EP 4

219 - 4

lMinimumSize-76mm

OrderCode:

DESIGN-EDGE 219-5

EP 5

219 - 5

lMinimumSize-68mm

OrderCode:

DESIGN-EDGE 219-6

EP 6

219 - 6

lMinimumSize-100mm

OrderCode:

DESIGN-EDGE 219-14

EP 14

219 - 14

lMinimumSize-96mm

OrderCode:

DESIGN-EDGE 219-19

EP 19

219 - 19

lMinimumSize-106mm

OrderCode:

DESIGN-EDGE 219-17

EP 17

219 - 17

lMinimumSize-100mm

OrderCode:

DESIGN-EDGE 219-16

EP 16

219 - 16

lMinimumSize-90mm

OrderCode:

DESIGN-EDGE 219-15

EP 15

219 - 15

Finishes available with designs On this Page:

• RouteredDoors-ALLfinishes

• VacuumFormedDoors-ALLfinishes





SCALE 1:1 SCALE 1:1

SCALE 1:1SCALE 1:1

SCALE 1:1

SCALE 1:1

SCALE 1:1

SCALE 1:1

SCALE 1:1SCALE 1:1 SCALE 1:1




OrderExample-204:

DESIGN-EDGE 204-3Sor3ONLy

lMinimumHeight-140mmlMinimumWidth-30mm

204 205

OrderExample-205:



OrderExample:



208

EP3S0REP3ONLy-VIEWTHESEEDGESONPAGE 2

SCALE 1:1

EP3S0REP3ONLy-VIEWTHESEEDGESONPAGE 2SCALE 1:1

OrderExample:


lFirstGroove40mmfromcornerlGrooves15mmapartlAngle45o


209

EP3S0REP3ONLy-VIEWTHESEEDGESONPAGE 2SCALE 1:1

lMINIMuMHEIGHT-200mm,MINIMuMWIDTH-200mm(Leaves20mmpanel)



SELECTEDGEFROMPAGE 2200

OrderExample:

DESIGN-EDGE 200-SELECTEDGE



SCALE 1:1

201 216

MINIMuMHEIGHTORWIDTHCANBESMALLERIFRAILSAREREDuCEDINSIZE

Finishes available with designs On this Page:• RouteredDoors

-ALLfinishes• VacuumFormedDoors

-ALLfinishes-unlessotherwiseindicated





250MINIMuMHEIGHTORWIDTHCANBESMALLERIFRAILSAREREDuCEDINSIZE

lMINIMuMHEIGHT-200mmlMINIMuMWIDTH-220mm(Leaves20mmpanel)

OrderExample:



SCALE 1:1

Distancewillvarywithdoorsize



Front Back


OrderExample:



257*EP3S0REP3ONLy-VIEWTHESEEDGESONPAGE 2

*design 257 - nOt available in vaCUUM FORMed

OrderExample:



232*


Back Front

OrderExample:



233*


Back Front

OrderExample:



260


SCALE 1:1

*design 232 - nOt available in vaCUUM FORMed *design 233 - nOt available in vaCUUM FORMed

OrderExample:

DESIGN-EDGE 240-4ONLy


240

EP4-ONLy

SCALE 1:1

18MMMinimumThickness


21MMMINIMuMTHICKNESS

OrderExample:



234* EP3S0REP3ONLy-VIEWTHESEEDGESONPAGE 2

Front Back

*design 234 - nOt available in vaCUUM FORMed

21MMMINIMuMTHICKNESS



OrderExample:


lGroovesaverage60mmapartdependingonthewidthofthedoorlMinimumHeight-30mmlMinimumWidth-120mm

212


SCALE 1:1

OrderExample:



OrderExample:



223

275


SCALE 1:1


SCALE 1:1

OrderExample:



OrderExample:


lGroovesaverage60mmapartdependingonthewidthofthedoorlMinimumHeight-150mmlMinimumWidth-250mm

224

276


SCALE 1:1

Finishes available with designs On this Page:• RouteredDoors

-ALLfinishes• VacuumFormedDoors

-ALLfinishes-unlessotherwiseindicated





Note:Centregroovesaverage60mmapartdependingonthewidthofthedoor



SCALE 1:1


ELEGANCE - 400 SERIES - DESIGNS & EDGES

SQuAREINTERNALCORNERSThe400seriesdoorsarerouteredfromonepieceofmaterialtoachieveSQuAREinternalcorners.NOTE:MINIMuMHEIGHTORWIDTHCANBESMALLERIFRAILSARE

REDuCEDINSIZE.

NOTE:416,417,486AND487HAVE2MMINTERNALRADIuSCORNER.

400 401

Vinyl Painted

SELECTEDGEFROMPAGE 9SCALE 1:1

MINIMuMHEIGHTORWIDTH244mm(Leaves20mmpanel)

Add30mmtoHEIGHTforARCHDOORS

THICKNESSAVAILABLE:18,21,25and32mm

OrderExample:



Finishes available with this design:• Routered-ALLfinishes• VacuumFormed-ALLfinishes• 2PackPainted-Standardfinishes• HandPainted-ByCabinetmaker

404 405

Vinyl Painted





OrderExample:




412 413 SELECTEDGEFROMPAGE 9SCALE 1:1




OrderExample:








OrderExample:





Approx. 2mm internal radius corners




MINIMuMHEIGHTORWIDTH236mm(Leaves20mmpanel)Add



OrderExample:




MINIMuMHEIGHTORWIDTH208mm(Leaves20mmpanel)Add



OrderExample:



430 431

Vinyl Painted





OrderExample:



426 427

Vinyl Painted





OrderExample:



438 439

Vinyl Painted




NOTE:ThisdesignisusedforGlassFramesandGlazingBars(See

PageX)


OrderExample:









9 P: 1300 837 765 E: [email protected] SCALE1:1drawingsareapproximatesizesonlyNOTE:Somemodificationsarepossibleonrequest

484 485 SELECTEDGEFROMbelOwSCALE 1:1




OrderExample:








OrderExample:



486 487 SELECTEDGEFROMbelOw

SCALE 1:1




OrderExample:







OrderExample:



SCALE 1:1 SCALE 1:1 SCALE 1:1 SCALE 1:1 SCALE 1:1

EDGES ALLELEGANCEDESIGNSMINIMuMTHICKNESS18mm

EP 2 EP 3S EP 3 EP 4 EP 5

approx. 2mm radius approx. 5mm radius





Approx. 2mm internal radius corners


CONTEMPORARY - 500 SERIES - DESIGNS & EDGES

502 503SELECTEDGEFROMPAGE 12

SCALE 1:1

MINIMuMHEIGHT-156mm502-MINIMuMWIDTH156mm(Leaves30mmpanel)

503-MINIMuMWIDTH246mm(Leaves120mmpanel)


GFfordesign502/503willbemadeasdesign576(unlessspecified)

OrderExample:



ALLCONTEMPORARyDESIGNSMINIMuMTHICKNESS18mm NOTAVAILABLEINGLOSSVACuuMFORMED

• Contemporarydesigndoorsareavailableinvariousfinishesandthicknessasshown• Asthedesignentailsrouteringupto7mmoutofthethicknessofthedoors,thereisareductioninthestrengthofthedoorwhichcanresultinbowingand/orcuppingoflargersizes

• Itisstronglyrecommendedthatsizesabove1500mmheightand/or500mmwidthinthesedesignsareproducedwithaverticalmidrailasshownonleft• Doublemidrailsandlargerrailsizesarealsostronglyrecommendedtoalleviatethisproblem• P1pantrydoors-notavailableintheseflatpaneldesigns• Checkminimumheightsandwidthsfordrawerfronts• AlldrawersinContemporaryDesignsaremadeasindividual

Average60mm

Distancewillvarywithdoorwidth

504 505 EP3SorEP3ONLySCALE 1:1




OrderExample:



506 507 EP3SorEP3ONLySCALE 1:1




OrderExample:



‘V’grooveon503only

Average60mm



Average60mm



Finishes available with this design:• Routered-SingleorDoublesidedwhitemelamineonly• VacuumFormed-ALLfinishesexceptGloss• 2PackPainted-Standardfinishes• HandPainted-ByCabinetmaker





Finishes available with this design:• Routered-SingleorDoublesidedwhite

melamineonly

• VacuumFormed-ALLfinishesexceptGloss• 2PackPainted-StandardfinishesorHand

Painted-ByCabinetmaker

Average60mm

Distancewillvarywithdoorwidth520* 521* SELECTEDGEFROMPAGE 12SCALE 1:1

OrderExample:

DESIGN-EDGE

520-SELECTEDGE


4mmradiusroundcorner

*DESIGNS 520 & 521 - NOT AVAILABLE IN VACUUM FORMED





OrderExample:



Average60mm



Average60mm

Distancewillvarywithdoorwidth560* 561* SELECTEDGEFROMPAGE 12SCALE 1:1

OrderExample:




*DESIGNS 560 & 561 - NOT AVAILABLE IN VACUUM FORMED



Average60mm

Distancewillvarywithdoorwidth593 594 SELECTEDGEFROMPAGE 12SCALE 1:1

OrderExample:














melamineonly

• 2PackPainted-StandardfinishesorHandPainted-ByCabinetmaker


melamineonly

• 2PackPainted-StandardfinishesorHandPainted-ByCabinetmaker


melamineonly

• VacuumFormed-ALLfinishesexceptGloss• 2PackPainted-StandardfinishesorHand

Painted-ByCabinetmaker



Add - ‘DVG’ to Selected Design

double ‘v’ groove exampleSCALE 1:1

OrderExample:

DESIGN-EDGE SELECTEDGE

DESIGN-EDGE SELECTDESIGN+DVG

SCALE 1:1 SCALE 1:1 SCALE 1:1 SCALE 1:1 SCALE 1:1

EP 2 EP 3S EP 3 EP 4 EP 5

approx. 2mm radius approx. 5mm radius

5mm

10mm

SCALE 1:1

DOUBLE ‘V’ GROOVE - also available on application





OrderExample:



Average60mm



575 576

Vinyl

Painted

SELECTEDGEFROMbelOwSCALE 1:1



PAINTEDEDGEONDESIGN575ONLy.576WILLuSEVINyLEDGE.


OrderExample:



Average60mm



EDGES ALLCONTEMPORARyDESIGNSMINIMuMTHICKNESS18mm

dvg is suitable for any design in 500 series






HERITAGE - 600 SERIES - DESIGNS & EDGES

NOTAVAILABLEINGLOSSVACuuMFORMED

ALLHERITAGEDESIGNSMINIMuMTHICKNESSBOARDIS21mm

• Heritagedesigndoorsareonlyavailablein21mm minimum thickness

• Plainpanelsareavailablein16,18,21,25&32-pleasespecify

• as the 601, 602, 604, 605, 606, 609, 631 and 634 designs entail routering up to 12mm out of the thickness of the doors there is a reduction in the strength of the door which can result in bowing and/or cupping of larger sizes

• Itisstronglyrecommendedthatsizesabove1500mmheightand/or500mmwidthinthesedesignsareproducedwithaverticalmidrailasshownonleft

• Doublemidrailsandlargerrailsizesarealsostronglyrecommendedtoalleviatethisproblem

• P1pantrydoors-NOTAVAILABLEintheseflatpaneldesigns

• P2pantrydoors-NOTAVAILABLEindesigns600,601,602and631

• Bar(STD)NOTAVAILABLEindesigns600,601,602and631

• Checkminimumheightsandwidthsfordrawerfronts

600



lNOTE:PantrydoorsonlyavailableinDoubleMidRails

lNOTavailableinbar(STD)

lThisdesignmaybesubjecttobowing

THICKNESSAVAILABLE:21,25and32mm

OrderExample:


NOTE:Designs600,601,602,631willhaveoutsiderailsrecessedtoapproximately16mmthicknessataminimum

601







OrderExample:


Finishes available with this design:• Routered-Singlesidedwhitemelamineonly• VacuumFormed-ALLfinishesexceptGloss• 2PackPainted-Standardfinishes• HandPainted-ByCabinetmaker


NOTE:Drawersindesigns601,602,604,605,606,609,631&634areonlymadeasindividuals.(SeeINFORMATIONSECTION,Page18)




602


MINIMuMHEIGHTORWIDTH

198mm(Leaves38mmpanel)with‘V’Groove-forHeight

286mm(Leaves120mmpanel)with‘V’Groove-forWidth





OrderExample:


603


SCALE 1:1



THICKNESSAVAILABLE:21,25and32mmOrderExample:


604


SCALE 1:1





Average60mm







605


SCALE 1:1

MINIMuMHEIGHTORWIDTH

198mm(Leaves38mmpanel)with‘V’Groove-forHeight

286mm(Leaves120mmpanel)with‘V’Groove-forWidth



OrderExample:


Average60mm



606


SCALE 1:1

OrderExample:


609

EP3SorEP3ONLy

SCALE 1:1

OrderExample:

DESIGN-EDGE 609-EP3SorEP3ONLy


lAlsoavailablewith‘V’Groove.In‘SpecialDesign’sectiononorderform,specify‘VG’forsingleor‘DVG’fordoublegrooves




lAlsoavailablewith‘V’Groove.In‘SpecialDesign’sectiononorderform,specify‘VG’forsingleor‘DVG’fordoublegrooves








SCALE 1:1

EP 2

SCALE 1:1

EP 5

SCALE 1:1

EP 3S

approx. 2mm radius

SCALE 1:1

EP 3

approx. 5mm radius


623

EP3SOREP3ONLyVIEWTHESEEDGES belOw

SCALE 1:1





631

SELECTEDGEFROMbelOw

SCALE 1:1

MINIMuMHEIGHTORWIDTH200mm(Leaves38mmpanel)lAlsoavailablewith‘V’Groove.In‘SpecialDesign’sectiononorderform,specify‘VG’forsingleor‘DVG’fordoublegrooveslNOTE:PantrydoorsonlyavailableinDoubleMidRailslNOTavailableinbar(STD)lThisdesignmaybesubjecttobowing


OrderExample:


634

SELECTEDGEFROMbelOw

SCALE 1:1

OrderExample:


MINIMuMHEIGHTORWIDTH222mm(Leaves38mmpanel)lAlsoavailablewith‘V’Groove.In‘SpecialDesign’sectiononorderform,specify‘VG’forsingleor‘DVG’fordoublegrooves



DESIGN 634 - NOT AVAILABLE IN VACUUM FORMED


EDGES ALLHERITAGEDESIGNSMINIMuMTHICKNESS21mm


Finishes available with this design:• Routered-Singlesidedwhitemelamineonly• VacuumFormed-NOTavailable• 2PackPainted-Standardfinishes• HandPainted-ByCabinetmaker


2mmradius


MDF Accessoriesand

Other Products


DRAWER FRONTS

as dOOR (dRw)

•Bluelineindicateswheredrawerfrontswillbeedgedunlessotherwisespecified

individUal (ind)eQUal dRaweRs

individUal eQ CentRe Panels (ind eCP)

individUal diFFeRent siZed dRaweRs

dRaweR dOOR individUal with aRCh tOP

individUal with all aRCh

individUal POt dRaweRswith FUll Rails

as dOOR with aRCh tOP

BAR PANELS

baR (std) baR (dMR) - double Mid Rail baR (dMR) sPd

720870

720870

9701120

• ASDOORwillbeusedunlessspecifiedNote:ContemporaryandHeritage(Series500or600)withrecessedpanelswillbeINDIVIDuAL.

• EqualordifferentsizeDrawerfrontsavailable.• Approx3mmgapbetweenDrawers.• Centrehalf-railsonIndividualDrawersmayvarydependingonsizeanddesign.

• Numberofpanelsandpanelwidthcalculatedtoapprox500mmwideunlessnumberofpanelsspecified.• AllRailscanbemodifiedtosuitcorbelsetc,pleasespecify.• PleaseensureHeightandWidthareoveralldimensions.

Orderexample:

QTy Height Width Description

1 710 450 DRW4

lNOTE:FIGuRESSHOWNAREEXAMPLESONLy

Orderexample:


1 710 450 DRWIND4


Orderexample:


1 710 450 DRWINDECP4


Orderexampleof710Hx450W:

QTy Description

1 DRWIND180T/262M/262B



QTy Description

1 DRWIND180T/527B



QTy Description

1 DRW4



QTy Description

1 DRWIND4



QTy Description

1 DRW4ALLARCH



QTy Description

1 DRWIND2FuLLRAIL


S=SQ

QTy Height Width T B L R Description

1 720 1100 BAR2

S=SQ


1 870 1100 S BAR2150K


Orderexample:(withoutkick)

Example:(with150kick)

S=SQ


1 970 1100 SEEDRAWING

S=SQ


1 1120 1100 S SEEDRAWING

lNOTE:FIGuRESSHOWNAREEXAMPLESONLylNOTE:For(SPD)Pleasesupplydrawingshowingalldimensions



S=SQ


1 720 1100 BAR2DMR

S=SQ


1 870 1100 S BAR2DMR150K




NOTERefertominimumsizesforspecific

designsastheyvary


PANTRY DOORS

B BB

K

K K

K K K

• PantryDoorsorRouteredEndPanelsmaybemanufacturedinanydesigns,andanyprofilescanbeused.

• P2: Pantry with code P2 will always be used unless specified otherwise. Please nOte: if no bottom height measurement is specified for pantry, height of floor cupboard doors will automatically be used.

• AnyPantryDoorsorRouteredEndPanelsmayhaverailsmodified.example: +20 Rhs,willgiveyou20mmextraontheRightHandSideRail.Pleaseensureheight&widthareOveRall diMensiOns.

• Pleasenotethatlargersizedoorswillshowmoreevidenceofbowingandcuppingandcabinetmakersarerecommendedtoavoid,wherepossible,sizesmuchgreaterthan2400mmhighand/or500mmwidth-additionalhingesarenecessaryonlargerdoorse.g.3hingesabove800mmheight,5hingesabove1500mmheightetc.


Description

P1


Description

P1150K



Description

P5720B600T


Description

P5720B600T150K



Description

P2720B


Description

P2720B150K



Description

P3720B


Description

P3720B150K



Description

P4720B1180T


Description

P4720B1180T150K


Order descriptions

P1 = SingleFaceDesign

P2 = BaseDoorHeightmatched withaSinglemidrail

P3 = BaseDoorHeightmatched withaDoublemidrail

P4 = BaseDoorHeightmatched withaDoublemidrail plusBenchthickness

P5 = BaseandOverheadDoor Heightmatchedwith Singlerails

B = HeightrequiredforBaseDoor

T = HeightrequiredforTopDoor

K = Kickerheightifrequired

VMR = VerticalMidRailrequired

P1 is nOt available in all designs

TP4P3

B

T

P5

P1 P2

vertical Mid RailAlldoorsareavailablewithaverticalmidrail.

Additionalchargesmayapply.


GLASS FRAMES & GLAZING BARS

glass FRaMes

Shadedareawillmatchyourselecteddesign

glass FRaMesCOde: gF

*glaZing baRsCOde: gb ?

(Where?=NumberofGlassPanels)

BI-FOLD DOORS

design 100PlainDoorsordesignsusingPINGroovewillusedesign 438-unlessotherwisespecified.

ViewthisdesignonpagevFd - 8

sPeCial nOte:

Bi-Foldasdoorisnotrecommendedtoputedgeprofileontheinsideedges.

• Bi-folddoorsabove800mminheightor500mmwidtharenotrecommendedduetothebowingandcuppingthatcanoccur.

• Bi-foldasadoornotavailableinrecessedflatpaneldesigns.Example:Country&HeritageDesigns.

vaCUUM FORMed• CanbeVacuumFormedsingleordoublesided.

• OpenShelvesaremade10mm biggerinheightandwidthsothattheycanbecutoffonthesawandassembledimmediately,eliminatingdamagetosharpedges.

• OtherCustomshapesavailableuponrequest.

Pleasespecifydimensionsandedges.Includedrawingwithallsizesrequired.

Orderexample:


1 720 400 GF


Profilewillmatchselecteddesign

Orderexample:


1 720 400 GB6


design 520anddesign 560willhaveCentrerails20mmnot10mmonGlazingbars.

glaZing baRs

CORNER SHELVES

•Bluelineindicateswheredrawerfrontswillbeedgedunlessotherwisespecified

bi-FOld bi-FOld (ind)Orderexample:


1 710 450 BI-FOLD


Orderexample:


1 710 450 BI-FOLDIND


OverallWidth OverallWidth

*Orderexample:


1 300 300 ASDRAWING


Orderexample:


1 300 300 ASDRAWING


Approx.10mm

*NOTE:glazing barsareavailablemachinedforindividualglasspiecesonrequest


dental base DentalBasecanbeaddedbelowcappingfor:

• Federation• Sculptured• Colonial• Country• Bevel• Bullnose

Orderexampleof2400longx60mm:


1 2400 DENTALBASE

lLENGTHSAVAILABLEFORVACuuMFORMED:1200,1700,2400,3400mmlLENGTHSAVAILABLEFORROuTERED&PAINTED:1200,1800,2400,3600mmlOVERALLTHICKNESS:18or25mm(for25mmthemaxlengthis2400mm)lOVERALLDEPTH:90mmstandard,maximum100mm

*Internalcornershaveasmallradius

CAPPING

dental ROUnd Orderexampleof2400long-DENTALROuND:lNOTE:FIGuRESSHOWNAREEXAMPLESONLy


1 2400 CAPPINGDENTALROuND

lLENGTHSAVAILABLEFORVACuuMFORMED:1200,1700,2400,3400mmlLENGTHSAVAILABLEFORROuTERED&PAINTED:1200,1800,2400,3600mmlOVERALLHEIGHT:80mmlOVERALLDEPTH:100mmBASEDEPTH:47mm

Orderexampleof2400long-DENTALSQuARE:lNOTE:FIGuRESSHOWNAREEXAMPLESONLy


1 2400 CAPPINGDENTALSQuARE

lNOTAVAILABLEINVACuuMFORMEDlLENGTHSAVAILABLEFORROuTERED&Painted:1200,1800,2400,3600mmlOVERALLHEIGHT:80mmlOVERALLDEPTH:100mmBASEDEPTH:47mm

dental sQUaRe

FedeRatiOn Orderexampleof2400long:


1 2400 CAPPINGFEDERATION


*

sCUlPtURed Orderexampleof2400long:


1 2400 CAPPINGSCuLPTuRED


*

bevel Orderexampleof2400long:


1 2400 CAPPINGBEVEL


*

COUntRY Orderexampleof2400long:


1 2400 CAPPINGCOuNTRy


*

bUllnOse Orderexampleof2400long:


1 2400 CAPPINGBuLLNOSE

lNOTAVAILABLEINVACuuMFORMEDlLENGTHSAVAILABLEFORROuTERED&PAINTED:1200,1800,2400,3600mmlOVERALLHEIGHT:32mmlOVERALLDEPTH:95mmBASEDEPTH:80mm

*

Orderexampleof2400long:


1 2400 CAPPINGCOLONIAL


COlOnial *

NOTE:MEASuREMENTSSHOWNAREONLyAPPROXIMATESANDMAyVARySLIGHTLy


WALL OVEN & MICROWAVE FRAMES

Either flat or angled bar(s) are to be used as heatdeflectorsbetweenunderbench/wallovensanddoors.Availableinsizes730and2200.Availablefinish-White,BlackorChrome.

• Refer to the Care & Maintenance on the inside back cover.

Oven FRaMe

ROlleR shUtteR FRaMe

wall Oven + MiCROwave FRaMe

ROLLER SHUTTER DETAILS

• EP3WILLBEuSEDONINSIDEEDGESIFNOTHINGISSPECIFIED.

Orderexample:




WALLOVENANDMICROWAVEFRAMES:Pleasesupplydrawingshowingalldimensionsrequired.

NOTE:Minimumrailsizes30mmforVacuumformed.

Orderexample:


1 600 400 ROLLERSHuTTER


• AvailableinALLVacuumFormedcolours• HorizontalGrainisusedunlessotherwisespecified(15%extraforverticalgrain)• Toorderroller-specifyinternalcarcassheightandinternalcarcasswidth• Rollerframe-Outsideframedimensionstosuitcarcassheightandwidthwithverticalrailstobeminimum45mm

andtoprailaminimumof56mm(basedon16mmcarcass)

Orderexample:




ROlleR shUtteR FRaMes:Pleasesupplydrawingshowingalldimensionsrequired.

Minimumrailsizes:verticalrailstobeminimum45mmandtoprailaminimumof56mm.

• EP3SWILLBEuSEDONINSIDEEDGESIFNOTH-INGISSPECIFIED.

OVEN STRIPS

Orderexample:




WALLOVEN+MICRO:Pleasesupplydrawingshowingalldimensionsrequired.

NOTE:Minimumrailsizes30mmforVacuumformed.

10mmRadius10mmRadius

10mmRadius

MICROWAVEOPENING

inteRnal edgesEP3orEP3SONLy

WALLOVENOPENING


WALLOVENOPENING

FLAT BAR

ANGLE

10mmRadius




WINE RACKS

FUll Kit inteRnal OnlY

ConsistingofinternalpiecesonlyConsistingof2xSides,1xTop,1xBottomplusBackwithinternalpieces.

Orderexample:


1 400 2000 WR-INTERLOCK-INTERNAL


inteRlOCK wine RaCKs• Allcomponentssuppliedwithgroovestointerlock(notassembled).

• Approx.90mmholes,willvarydependingonoverallsize.

• Suppliedunpaintedorpainted.

• Standarddepthapprox.350mmoverall-unlessspecified.

Orderexample:


1 400 2000 WR-INTERLOCK-FuLLKIT


FaCe Panel OnlY

CiRCle alt. CiRCle diaMOnd sQUaRe

Orderexample:


1 720 450 WR-CIRCLE-FACEONLy


Finishes available:• Routered-ALLfinishes• VacuumFormed-ALLfinishes

• 2PackPainted-Standardfinishes• HandPainted-ByCabinetmaker

PLEASENOTE:GAPBETWEENEDGESANDEACHHOLEMuSTBE30MMMINIMuM


BOARD, FOIL & EDGING - VACUUM FORMED

bOaRdReadyforcuttingandedging-Sizeavailable:2400x1200EdgeswillbeSquareandRawThickness:16mmor18mmMRMDFFinish: S/S-SingleSidePVC&othersidewhitemelamine D/S-DoubleSidedPVC

edgingMatchingPVCedgetapeavailableMinimum25L/MungluedWidth:21mmThickness:0.4-0.7dependingoncolour

PvC FOil

Length:LinealMeters

Width:1300-1400dependingoncolour

Thickness:0.4-0.7dependingoncolour

RECESS RAIL• ROuTEREDONLy-Availableinlengthsof

1200,1800,2400and3600mm• VACuuMFORMED-Availableinlengthsof

1200,1700,2400and3400mm• Thickness:25mm• OverallHeight:60mm

Orderexample:


1 2400 RECESSRAIL(Loru)


10

1312

50

60

60

FRETWORK

FisheYe RelieF FisheYe OPen* - Not available in Vacuum Formed

Orderexample:


1 150 500 FISHEyERELIEF


Orderexample:


1 150 500 FISHEyEOPEN


• Availablein18,21,25&32mm

• Custommadesizesanddesigns,senddiagramsofFretworkrequired

• Paternwillvaryaccordingtoheight&width

• Availablein18,21,25&32mm

• Custommadesizesanddesigns,senddiagramsofFretworkrequired

• Paternwillvaryaccordingtoheight&width

‘l’ Rail

‘U’ Rail

Finishes available:• Routered-ALLfinishes• VacuumFormed-ALLfinishesexceptGloss• 2PackPainted-Standardfinishes• HandPainted-ByCabinetmaker

Finishes available:• Routered-ALLfinishes• VacuumFormed-NOTavailable• 2PackPainted-Standardfinishes• HandPainted-ByCabinetmaker




FROnt view - CRh FROnt view - CRhv

FROnt view - CRhvF

side view

CANOPY RANGE HOODS - ROUTERED ONLY

Orderexample:


1 800 CRH-800

1 1100 CRH-1100

700

800

107

205

545

siZes availableCanopywidthsareavailablein800mm&1100only

nOte: CanopyRangeHoodsaresuppliedassembled.Ends/TopandBackarenotsupplied.

BackingPanelcanbeenlargedonapplication.

Orderexample:


1 800 CRHV-800

1 1100 CRHV-1100

‘v’ gROOve available (CRhv)‘V’Groovedesignisavailableonfrontpanelasabove

• Refer also to item 15 of Care & Maintenance instructions inside back cover.

*nOte: Canopy Range hoods are not available in vacuum Formed finish but can be painted by tesrol to match plain colours.

FROnt view - CRhF side view

Orderexample:


1 800 CRHF-800

1 1100 CRHF-1100

siZes availableCanopywidthsareavailablein800mm&1100only

nOte: CanopyRangeHoodsaresuppliedassembled.Ends/TopandBackarenotsupplied.

Orderexample:


1 800 CRHVF-800

1 1100 CRHVF-1100

‘v’ gROOve available (CRhvF)‘V’Groovedesignisavailableonfrontpanelasabove

• also available with fretwork on the 2 x side panels on application only.• Refer also to item 15 of Care & Maintenance instructions on inside back cover.

CanOPY with FRetwORK

Finishes available:• Routered-Rawonly• VacuumFormed-NOTavailable• 2PackPainted-Standardfinishes• HandPainted-ByCabinetmaker

Finishes available:• Routered-Rawonly• VacuumFormed-NOTavailable• 2PackPainted-Standardfinishes• HandPainted-ByCabinetmaker

700

800

107

205

545


DECORATIVE COLUMNS

blOCK 1 blOCK 4

blOCK 7*

blOCK 2 blOCK 5blOCK 3

blOCK 6

DECORATIVE BLOCKS

Orderexample:


1 BLOCK2

Orderexample:


1 720 COLuMN2


100

100

siZe: 100 x 100mm OnlY• Blocks1,2,3,4,5&6availablein18,21,25and

32mmthickness

• *Block7availablein32mmonly

100

100

80

80 100 100

100

100

COlUMn 1MinimumHeight

250mmAvailablein18,21,25mmand32mm

thickness


400mmAvailableinboth100mm&80mm

widthsAvailablein18,21,25mmand32mm

thickness



thickness



thickness

COlUMn 5Width100mmonlyMinimumHeight

100mmMaximumHeight

1500mmOnlyavailablein25mmand32mm

thickness

COlUMn 6Width100mmonlyMinimumHeight

460mmMaximumHeight

1500mmOnlyavailablein25mmand32mm

thickness

nOte: Somemodificationsarepossibleonrequest.

Finishes available:• Routered-ALLfinishes• VacuumFormed-ALLFINISHES

Availableforblocks1,2,3,4&5NOTavailableforblocks6&7

• 2PackPainted-ALLfinishes• HandPainted-ByCabinetmaker

Finishes available:• Routered-ALLfinishes• VacuumFormed-ALLfinishesavailablefor

columns1,2,3&4NOTavailableforcolumns5&6



SKIRTINGS

Orderexampleof150highx1200long


1 150 1200 SK1




1 150 1200 SK2




1 150 1200 SK3


• Availablein18,21,25&32mmthickness• LengthsavailableVacuumFormed:1200,1700,2400&3400mm• LengthsavailableRoutered/Paint:1200,1800,2400&3600mm• 21mmthicknessupto3100mmlongONLyforallfinishes• Standardheight150mm-unlessotherwisespecified

50mmApprox.

68mmApprox.

sKiRting - sK3sKiRting - sK2sKiRting - sK1 sKiRting - sK4



1 150 1200 SK4


43mmApprox.



SCALE1:1drawingsareapproximatesizesonly

23mmApprox.


Heigh

t

Heigh

t

Heigh

t

Width Width

R1 R1

E1 E1

Width

R1

E1

E2R2

E1

R1

E1

R1

E1 E2

R1 R2

F1L F1R

F1LR

FOLDED PANELS - Vacuum Formed Only - Supplied Folded & Glued

standard Used Options

MaterialThickness 18mm MaterialThickness-16,18,21,25mm

E1orE2 SingleThickness 16=16mm,18=18mm,21=21mm,25=25mm

R1orR2 100mmONLy 100mmONLy

Designs FaceN/A-EdgeNEPonly

Columns FaceN/A-EdgeNEPonly

total width (tw) = width + e1 + e2 + R1 + R2

Minimum sizesPlainPanel:150x150mm

PanelwithDesign:SeeDesigndetailsforMinimumSizes

Maximum sizesSolidColours-3400hx1050(tw)OR1050hx3400(tw)

Woodgrains-3400hx1050(tw)ORhorizontalgrain-1050hx1050(tw)

single thickness Folded Panels - Only available in Plain Face with nO edge profile.

double thickness Folded Panels - available as Plain Face or with Face designs. nO edge profile only

Heigh

t

Heigh

t

Heigh

t

Width Width

R1 R1

E1 E1

Width

R1

E1

E2R2

E1

R1

E1

R1

E1 E2

R1 R2

F1L F1R

F1LR

Face of Panel - Width

MaterialThickness

Material Thickness

100mm defaultWider available

on request


on request



100mm only

DoubleMaterial

Thickness

Material Thickness

Material Thickness

VariableThickness

Front Edge

Material Thickness

Material Thickness

Hei

ght

Hei

ght

Hei

ght

R1

R1

R1

E1 E1Width Width

E1

R1

E1

R2R1

E1 E2

R1

E1

E2

Width

R2

F2L F2R

F2LR

414 186

Extra panel

600

36

Hei

ght

Hei

ght

R1

R1

R1

E1 E1Width Width

E1

R1

E1

F2LDS

F2RDS

F2RDS



E1orE2 DoubleThickness 16=32mm,18=36mm,21=42mm,25=50mm

R1orR2 100mm Over100mm

DesignsPlainORDesignsexcept600,601,602,631EdgeNEPonly

Columns FaceN/A-EdgeNEPonly







MaterialThickness

Material Thickness


on request


on request



100mm only

DoubleMaterial

Thickness

Material Thickness

Material Thickness

VariableThickness

Front Edge

Material Thickness

Material Thickness

414 186

Extra panel

600

36

Hei

ght

Hei

ght

R1

R1

R1

E1 E1Width Width

E1

R1

E1

F2LDS

F2RDS

F2RDS

414 186

Extra panel

600

36

Hei

ght

Hei

ght

R1

R1

R1

E1 E1Width Width

E1

R1

E1

F2LDS

F2RDS

F2RDS

NOTE: IfFace+Edge+Returngreaterthanmaxwidth,youmustorderanextraplainpaneltofinishthedoublesidedpanel.Onlyifrequired.


Hei

ght

Hei

ght

Width WidthE1 E1

R1 R1

E1

R1

E1

R1

F3L F3R

FOLDED PANELS - Vacuum Formed Only - Supplied Folded & Glued

variable thickness Folded Panels with Columns - available as Plain Face or with Face designs and / or Columns. nO edge Profile only.

Hei

ght

E1 E2

R1 R2

Width

E1

R1

R2 E2

F3LR

E1E1

R1R1

Hei

ght

WidthWidth

E1E1

R1R1

Hei

ght

350 250

Extra panel

600

100

F3RDS

F3LDS

F3RDS



E1orE2 100mm Over100mmalsoavailable

R1orR2 100mm Over100mmalsoavailable

DesignsPlainORDesignsexcept600,601,602,631EdgeNEPonly

Columns PlainORColumnNo:1,2and3ONLy-EdgeNEPonly







MaterialThickness

Material Thickness


on request


on request



100mm only

DoubleMaterial

Thickness

Material Thickness

Material Thickness

VariableThickness

Front Edge

Material Thickness

Material Thickness

E1E1

R1R1

Hei

ght

WidthWidth

E1E1

R1R1H

eigh

t

350 250

Extra panel

600

100

F3RDS

F3LDS

F3RDS

NOTE: IfFace+Edge+Returngreaterthanmaxwidth,youmustorderanextraplainpaneltofinishthedoublesidedpanel.Onlyifrequired.


CORBEL SIZESCorbels are hand carved and will vary in size

ORDERCODE Height Width Depth

#3 340 90 90

#33 225 70 65

#4 340 90 65

#5 230 90 90

#66 290 70 70

#7 335 90 90

C1 115 42 19

C13 300 90 85

C22 225 70 65

C8 205 70 65

C88 285 90 85

CL4 265 65 65

CL5 285 70 70

S1 70 70 19

T2 (X2) 115 115 19

TB2 125 90 35

TB3 145 120 35

TB4 145 120 35

C1 C8 C22 #33 #5

CL4 CL5 C88 #66

C13 #7 #3 #4

CORBELS

OrderCodeforCorbel#3


2 CORBEL#3


S1

T2 (Pair)

TB2 TB3 TB4

Example of Corbel #3 with top block TB3

CORBELS ARE HAND CARVED AND SUPPLIED AS RAW PINE OR PAINTED


CUSTOM MADE PRODUCTS

Tesrol are able to create an amazingly wide range of custom shapes. Suitable for commercial, industrial, medical, hospitality, retail, office and domestic furniture applications. All created from customers drawings and specifications.

CUSTOM SHAPES

Custom Made Products are manufactured based on the customer providing sketches, or if possible, CAD files (preferably in dxf format). With these drawings/sketches Tesrol can prepare an accurate quotation for the project.

All custom products can be either painted or where possible vacuum formed in one of Tesrol’s wide range of vinyl foils, which includes various horizontal grade foils. See our brochure for more details.

Maximum sizes available:TESROL can router various custom shapes from 18, 21, 25 and 32mm thickness MDF board.

• Maximum size for painted panels is 3600 x 1200mm• Maximum size for vacuum formed panels without formed edges is 3400 x 1200mm• Maximum size for vacuum formed panels with formed edges is 3400 x 1050mm• Macimum size for 21mm thickness in all finishes is 3100mm x 1200mm

NOTE: All Vacuum Formed products are for INDOOR USE ONLY. Certain limitations on minimum radii and sizes will apply.



SLATBOARD

LETTERING - SOLID CUTOUT, CUT THROUGH, RAISED OR RECESSED

Material thickness and colours are specific to product and market availability. Sheet size 2400 x 1200mm. Available as single or in pack.

Tesrol can produce letters in ‘script’ format - and where required a small radius can be applied to the edges to ‘soften’ the look. Letters can be cut as solid with square edges and painted. Letters can be cut out as a recess or relief. Depending on the size and intricacy some letters can be vacuum formed. Letters can be cut straight through the MDF allowing the use of a light source or backing colour to provide emphasis. Examples of such design are noted below.



OFFICE AND RESTAURANT FURNITURE

LATTICE

TOPS FOR WORKSTATIONS, BOARDROOM TABLES, DESKS, RESTAURANT TABLES, DINING TABLES, COFFEE & OCCASIONAL TABLES etc

Numerous designs for customised workstation and desktops can be produced - with the further advantage of vacuum forming to achieve a seamless look. Waterfall edges also give a more streamlined appearance (routered Waterfall edge only available in 25mm). Horizontal grade foils are available - providing extra durability. boardroom table tops are available in customised sizes and shapes. Many customised shapes and sizes enable Home owners as well as Restaurant and Cafe owners to obtain components that suit their individual requirements.

Custom Design Lattice work - can be cut out of MDF or Timber veneer. The example shown below is Timber Veneer glued to a coloured panel. The example on the right is Polyurethane painted MDF as a wall divider.



GRAPHIC PANELS

WALL & STAIR PANELS GLASS DOOR & WINDOW FRAMES

Custom Design Graphic Wall Panels with text or illustrations are easily achieved as shown here. This wall is in the conference room of Beiersdorf Cosmetics in Sydney. This example has a vacuum formed vinyl finish.

Suitable for painting or vacuum forming - max lengths are 3600mm for painting and 3400mm for vacuum formed, depending on required thickness. Suitable for raked walling at stairwells. For retail, corporate boardrooms and reception areas as well as for domestic use for walls and stairs.

Custom routered frames give a new dimension to doors and windows. Routered from MDF board ready for painting.

82P: 1300 837 765 E: [email protected] GST will be added to all prices

For other sizes, thicknesses, designs, finishes or anything that

may be of a special design.

Feel free tocontact us to assist you with your

inquiry.

P: 1300 837 765E: [email protected]

83 P: 1300 837 765 E: [email protected] GST will be added to all prices

deFinitiOns/inteRPRetatiOn

“Customer”meansthepurchaserandincludesbutisnotlimitedtocabinetmakers,professionalinstallers,endusersandotherswhopurchaseanyTesrolproductsandwhetherasprincipal,agentorcontractor.

“Products”meanskitchen,vanity,cabinetdoors,panel,orboardproductsmanufacturedbyTesrol,andincludesallotherancillaryproductssoldbyTesrol.

“Tesrol”includesTesrolJoineryPtyLtdasTrusteeforTesrolJoineryunitTrust(ACN003111224)TesrolDoors,TesrolDesignsandTesrolssuccessorsandassigns.ThelawsoftheStateofNewSouthWales,Australia,willapply.

OFFeR and aCCePtanCe

Anytermsorconditionsofacustomer’sorderorotherinstrument,whichpurporttobeinadditionto,orwhichareinconsistentwiththeseterms,shallnotbebindingonTesrolunlessagreedtoinwritingbyanauthorizedofficerofTesrol.AnyquotationmadebyTesrolisnotanoffertosellandnoordergiveninpursuanceofanyquotationwillbindTesrolunlessanduntilTesrolacceptssuchorderinitsabsolutediscretion.deliveRY

AnydatequotedfordeliveryisanestimateonlyandTesrolshallnotbeliabletotheCustomerforanylossordamagewhetherdirect,indirectorconsequentialandhowsoeverarisingforfailuretodeliveronorbeforethequoteddate.TheCustomerwillacceptandpayforthegoodsifandwhentenderednotwithstandinganyfailuretodeliverthegoodsbythequoteddate.Tesrolisnotliableforanypenaltiesarisingfromlatedeliveries.Tesrolreservestherighttodeliverbyinstalments,whichdoesnotentitlethecustomertoterminateorcancelanyinstalmentsstilltobedeliveredortoanylossordamagehowsoeverarisingforfailurebyTesroltodeliveranyinstalmentbythequoteddate.uponsigneddeliveryofgoods,noClaimsorCreditswillberecognisedafter2daysfromreceiptofgoodunlessauthorisedbyanofficerofTesrol.

desCRiPtiOn, sPeCiFiCatiOns and tOleRanCes

TTesroldoesnotwarrantorguaranteethatanygoodsmanufactured,constructedorTesroldoesnotwarrantorguaranteethatanygoodsmanufactured,constructedorsuppliedbyTesrolwhicharebasedinwholeorinpartuponanydesigns,drawings,measurementsorspecificationssuppliedtoTesrolbyoronbehalfofthecustomer,willachieveanystandardorperformanceoranycapacitywhatsoever.

Tesrolwillnotbeliableforanydefectinthegoodsarisingfromanydesigns,drawingsorspecificationssuppliedtoTesrolbythecustomer.

TheproductsshallbesuppliedandacceptedwithintheappropriateAustralianStandards.Notethatcustomersorderingslidingdoorsthatrequireminimalornegligible“bowing”shouldlookatinstallingdoorstraighteningdevicewhichcanbesuppliedbyTesrol.

Anysamplesoftheproductsexhibitedtoorinspectedbythecustomerisacknowledgedtobesolelyforthepurposeofenablingajudgementandguideastothequalityofthebulkbeforebuyingandnotsoastoconstituteasalebysample.

Tesrolacceptsnoliabilityforfailureoftheproductsifanycareinstructionshavenotbeenstrictlyadheredto.NOTE:Claimsformissingitemsor“non-latent”defectswillonlybeconsideredbyTesrolifmadewithin48hoursofreceiptofthegoods.

Tesrolshallnotbeliableforanycostsincurredforanyproductorderedincorrectlybythepurchaserresultinginremakingtheproduct.Theremakeoftheproductwillbeatthe

costofthecustomer.SomedesignsentailheavyrouteringoftheMDFupto7mmoutofthecentresofthedoors,thiscouldcauseareductioninthestrengthofthedoorwhichcanresultinbowingand/orcuppingoflargersizes.Tesrolisnotliableforanycostduetobowingdoors.Refertoourdatabookformoreinformation.

Allcoloursdepictedinmarketingmaterialareindicativeonlygivenprintinglimitations.Tesrolacceptnoliabilitytocolourvariation.Paintproductsareunabletobematchedexactlytootherpaintcompanycoloursduetomaterialsubstratesandcomponents.Bestendeavourswillbeusedtomatch.However,Tesrolisnotliableforcolourvariance.

PRiCe

ThepricesarenettandaresubjecttoadjustmenttoconformtothelatestTesrolProductCataloguePriceList,andaresubjecttochangewithoutnotice.

unlessotherwisespecifiedanypricesquoteddonotincludetransportationcosts.InadditiontothepricethecustomershallpayGSTandanyothergovernmenttaxesapplicable.

PaYMent

unlessstatedoragreedtothecontrary,thewholeofthepurchasepriceisdueimmediatelyupondeliveryofthegoodstothecustomerorthecustomer’scarrieroragent,andispayableondemandor,ifnodemandismade,withinthirty(30)daysaftertheendofthemonthinwhichthegoodsaredelivered.Tesrolreservestherighttochargeinterestattherateoffifteenpercent(15%)perannumcalculateddailyonoverdueamounts.

TitletothegoodsshallnotpasstothecustomeruntilTesrolreceivesaclearedpaymentinfullforallthegoodssupplied.

Allgoodsshallbeatthecustomer’sriskupondeliverytothecustomer,hiscarrieroragent.

design and COPYRight

DesignrightsandcopyrightrelatingtoproductsofferedorsuppliedbyTesrolshallremainitsabsoluteproperty,andTesrol’sdesignsandcopyrightshallnotbereproducedordisclosedwithoutitswrittenconsent.ThecustomerwillnotcopyorallowotherstocopytheproprietarydesignsandanydrawingsorprintedmattersuppliedbyTesrol.

Media COPYRight

Allphotographs,graphicsandinformationfoundinTesrolprintandelectronicmediaarethesolepropertyofTesrol(oritscustomerswhensuppliedbypermissionforuseinsaidpublication)andcannotbereproducedorcopiedforanyotheradvertisingpurposeinanyformwithoutwrittenpermissionfromTesrol.Coloursindicatedonimagesandgraphicsarerepresentativeonlyandcustomersneedtoselectcoloursfromactualproductsamples.

waRRanties

IntheeventthatanysupplyagreementconstitutesasupplyofproductsorservicestoapurchaserasdefinedintheTradePracticesAct1974,asamended,(“theAct”)nothinghereinexcludes,restrictsormodifiesanycondition,warranty,rightorremedywhichpursuanttotheactisapplicableorisconferredonapurchaseoranythirdpartyprovidedthatTesrolsliabilityforsuchbreachincludinganyconsequentiallosswhichthecustomersustainsorincursshallbelimited(excepttotheextentspecificallysetforthherein)to:

• Thereplacementorrepairoftheproduct(s)orthesupplyofequivalentproduct(s);or• Thepaymentofthecostofhavingtheproduct(s)repaired,basedonTesrolagreeing

thatthecostssubmittedarefairandreasonable

Subjecttothisclause,allconditionsandwarranties,whichwouldormightotherwisebeimpliedinasupplyagreement,areherebyexcludedandnegatedtotheextentpermittedbylawandthisissoacknowledgedbythecustomer.Inparticularbutwithoutlimitation

TESROL TERMS & CONDITIONSTESROL JOINERY PTY LTD AS TRUSTEE FOR TESROL JOINERY UNIT TRUST (ABN 32 181 159 886)

ORDERS AND SALES BY TESROL FOR CABINET DOORS AND OTHER PRODUCTS ARE ACCEPTED BASED ON: -

84P: 1300 837 765 E: [email protected] GST will be added to all prices

anyconditionsorwarranties(whetherexpressorimplied)relatingtofitnessforpurposeorrelatingtoconformityoftheproductswithadescriptionshallandareherebyexcludedandnegatedtotheextentpermittedbylawandthisissoacknowledgedbythecustomer.

InnoeventshallTesrolorthecustomerbeliable,onetotheotherforspecial,incidentalorconsequentialdamagesorforanyindirectdamagesincludingwithoutanylimitationfortheforegoingexemplaryorpunitivedamages,damagetopropertyorlossofprofits.Tesrolwillnotwarrantanyproductinstallationsabovethelatitudeof-26.383degrees,beingthelatitudeofNoosaHeadsinQueensland.

Tesrolwillnotwarrantanyproductthathasbeenmovedfromitsoriginalplaceofinstallation.

Tesrolwillnotwarrantproductswheremodificationshavebeenmadeafterpurchaseorduetofaultyworkmanshipduringtheinstallationprocess.CustomerscannotfixorrepairanyproductssuppliedbyTesrolandthensendTesrolaninvoiceorclaimcreditwithoutourwrittenauthority.

Tesrolproductswillonlybewarrantedwhenstoredlyingflat,notstandingup,inadryanddustfreeenvironmentuntilfitted.

Foranywarrantyclaimthatrequiresonsitework,Tesrolwillorganisetheoriginalcabinetmakertoquotefirstbeforeproceeding.Tesrolwillalsocompareanycustomerquotationtoourcontractorsquotationandreservetherighttochoosethemostsuitablerepairer.

waRRantYtesROl vaCUUM FORMed dOORs — Residential indOOR Use OnlY

Subjecttotheconditionsabove,Tesrolwillrepair,orreplaceproducts,atitsoption,thataredefectiveduetofaultyworkmanshipormaterials,freeofcharge,foraperiodof7yearsfromthedatedproofofinitialpurchaseofthedefectiveproducts.

NootherTesrolproductsarecoveredbythiswarranty.

Ifthecustomeristorelyonthewarranty,theproductsmustnotbediscardedordestroyedandTesrolmustbegiventheopportunityofinspectingthedefectiveproducts,otherwisenoclaimunderthewarrantywillbeaccepted.Tesrol’sliabilityinrelationtorepairorreplacementwillnotextendtocolourvariationthatisaresultofwearandtearorfadingofcolourduetoexposuretouVradiation.,norwillitextendtodifferentialcolourvariationovertimewhencomparedtodissimilaradjacentmaterials.Iftheproductsarerepairedorreplacedduringthe7yearperiod,thewarrantywillcontinuebutfornolongerthantheunexpiredbalanceoftheinitial7yearperiod.

waRRantYtesROl bOaRd & Panel PROdUCts — Residential indOOR Use OnlY

Subjecttotheconditionsabove,Tesrolwillrepair,orreplaceproducts,atitsoption,thataredefectiveduetofaultyworkmanshipormaterials,freeofcharge,foraperiodof10yearsfromthedatedproofofinitialpurchaseofthedefectiveproducts.NootherTesrolproductsarecoveredbythiswarranty.

Ifthecustomeristorelyonthewarranty,theproductsmustnotbediscardedordestroyedandTesrolmustbegiventheopportunityofinspectingthedefectiveproducts,otherwisenoclaimunderthewarrantywillbeaccepted.Tesrol’sliabilityinrelationtorepairorreplacementwillnotextendtocolourvariationthatisaresultofwearandtearorfadingofcolourduetoexposuretouVradiation,norwillitextendtodifferentialcolourvariationovertimewhencomparedtodissimilaradjacentmaterials.

Iftheproductsarerepairedorreplacedduringthe10yearperiod,thewarrantywillcontinuebutfornolongerthantheunexpiredbalanceoftheinitial10yearperiod.

COMMeRCial installatiOn

AllTesrolproductswheninstalledinanon-residentialsituationwillbelimited&subjecttoa3yearwarrantyonly.Thiswarrantyonlyextendstoproductsinstalledinaverticalmanner.Tesrolextendsnowarrantywhatsoevertoanyproductswheninstalledinahorizontalapplication.

the tesROl gUaRantee

Ourcommitmenttoexcellenceisabsolute.Tesrolhasbeencraftingthehighestqualitycabinetdoorsformorethan35yearsandhasbecomeabrandleaderandthenaturalchoiceofcabinetmakersandinteriordesigners.

AllTesrolproductsaresubjecttoarigorousQualityinspectionprocess,ensuringthateveryitemsuppliedmeetsourstandard.

nOte

ThisdocumentwascorrectattimeofprintingandcustomersmustrefertoTesrolscurrentTerms&Conditions,CareandMaintenanceProcedures,aswellasWarrantyinformationonourwebsitewww.tesrol.com.au

tesrol doors is a division of tesrol Joinery Pty ltd as trustee for tesrol Joinery Unit trust

aCn 003 111 224 abn 32 181 159 886

TESROL TERMS & CONDITIONSTESROL JOINERY PTY LTD AS TRUSTEE FOR TESROL JOINERY UNIT TRUST (ABN 32 181 159 886)

ORDERS AND SALES BY TESROL FOR CABINET DOORS AND OTHER PRODUCTS ARE ACCEPTED BASED ON: -

CARE AND MAINTENANCE GUIDELINES FOR CABINETMAKERS

1. Check delivery on same day for: - - Damaged items - Manufacturing faults/imperfections IF ANY, PLEASE ADVISE TESROL IMMEDIATELY - Missing items (count doors off truck whenever possible)

2. Store or stack flat to prevent the bowing of the medium to tall items3. Store or stack items face to face4. Do not store doors outside or in direct sunlight5. Check depth of drilling head before drilling hinge or draw holes6. Do not slide doors when drilling for hinge holes7. Avoid solvent based cleaners and abrasive cleaners (PARTICULARLY AGGRESSIVE SOLVENTS) when cleaning the face or the back of doors8. All Routered MDF doors that are recessed, i.e. 500, 600 series doors must be sealed as quickly as possible or covered with plastic as to keep

humidity away from the core of the MDF. This will help protect against warping and twisting due to moisture loss or gain from the atmospheric conditions. It is still recommended to seal as soon as possible

9. When designing a kitchen, ensure that items are not positioned very close to appliances that give off steam(water jugs),heat(particularly flush mounted wall ovens), and naked flames i.e. Cupboards close to gas cooker plates. We firmly recommend the use of oven strips adjacent to all ovens

10. Check position of mounting screws in relation to routering i.e. integrated panels11. Do not remove protective coating where supplied e.g. gloss and matt colours, until installation is complete12. Wipe off any spills immediately13. Avoid contact with sharp objects14. Refer to HIA “ Guide to Kitchen & Bathroom Construction” Section 8.0 Appliances and Section 8.2.4 Oven/Cook top clearances.

A minimum vertical clearance between a cook top element or burner components is:• 600mm to a combustible surface – where the clearance is less than 600mm to a combustible surface, it must be protected with a fire

resistant material in accordance with AG/601(AS5601,Clause 5.12.1) or,• 600mm to a range hood• 750mm to an exhaust fan, or• To the manufacturers recommendations, whichever is the greater dimensionThe use of 900mm range hoods for 600mm cook tops will allow more flexibility on vertical clearance - but 900mm cook tops will need to follow the above guidelines

CARE AND MAINTENANCE GUIDELINES FOR END USERS

1. Avoid solvent-based cleaners and abrasive cleaners (particularly aggressive solvents) when cleaning the back or face of the door or item. Normal cleaning maintenance can be done with mild soap and water.

2. Do not use an abrasive cleaner or pad, always use a soft cloth.3. Wipe off any spills immediately4. Always clean regularly5. Avoid contact with sharp implements6. Do not place heaters in close proximity, as this can cause damage.7. Pull – out range hoods must be used to their fullest extension, to avoid steam and cooking oil vapours from adversely effecting surfaces.8. Avoid having a hot water jug/toaster etc. in a constant position directly underneath overhead cabinet doors/end panels.

www.tesrol.com.au

TESROL HEAD OFFICE405 Victoria StreetWetherill Park, NSW 2164 Australia

T: 1300 83 77 65F: 1300 83 77 75E: [email protected]: www.tesrol.com.au

VICTORIAN SHOWROOM13 / 114 Merrindale Drive Kilsyth VIC 3137T: 1300 837 765

OUR GUARANTEETesrol’s commitment to quality guarantees all our Vacuum Formed products for a period of 7 years against manufacturing or material faults.

Copyright Tesrol Joinery Pty Ltd. All photographs and information in this publication are the sole property of Tesrol Joinery Pty Ltd and cannot be reproduced or copied for any other advertising purpose in any form without written permission from Tesrol Joinery Pty Ltd.

Tesrol is a division of Tesrol Joinery Pty Ltd. ACN 003 111 224 ABN 32 181 159 886

Documents

WHOLESALE CATALOGUE - Tesrol · ELEGANCE - 400 SERIES - DESIGNS & EDGES 418 419 SELECT EDGE FROM PAGE 9 SCALE 1:1 MINIMuM HEIGHT OR WIDTH 236mm (Leaves 20mm …