Wi-Copy - Electronic Retailer & Wholesaler in … · Download the Wi-Copy App from the Apple ... Please download MX Player or MoboPlayer to ... Note: For HTC/Samsung Phone, please

Personal Cloud Storage

iOS5200mAh

802.11 b/g/n 14 USB Flash Drive& SD card Free App

Android

DW21

Wi-Copy

Safety Instructions 1

Location of Controls 2

Charging the Wi-Copy 3

Charging an Apple or Android Device 3

Operation – Apple Devices 4

Operation – Android Devices 10

Operation – Wi-Fi Hotspot 16

Operation – Wi-Fi Repeater 18

Operation – Other Wi-Fi Setting 19

Operation – APP Setting 20

Resetting the Wi-Copy 21

Contacting Us 21

Table of Contents

Safety Instructions

This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital

device, against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this equipment

does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

1.Reorient the receiving antenna.

2.Increase the separation between the equipment and receiver.

3.Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

4.Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes or modifications not expressly approved by the party responsible for

compliance could void your authority to operate the equipment.

ADDITIONAL SAFETY INSTRUCTIONS

‧ Do not try and disassemble or remodel the Wi-Copy. Doing so may cause the unit to mal

function and may void the warranty.

‧ Do not place the Wi-Copy in places that are exposed to oil, water or dust.

‧ Keep your Wi-Copy away from heated sources such as heaters or prolonged direct sunlight.

‧ Do not drop the Wi-Copy as it may cause serious damage and may void the warranty.

‧ Do not dispose of the unit via conventional domestic waste as it contains a battery.

1

2

Location of Controls

1. Power Indicator

2. Wi-Fi Indicator

3. Charging Indicator

4. Card/Drive Indicator

5. SD Card Slot

6. USB Port

7. Function Switch

8. RJ-45 Jack

9. Micro USB Port

10. Reset Button

1234

5

8

9

10

67

3

Charging the Wi-Copy

When the Power Indicator is orange, it is time to charge the battery. To charge this unit, simplyconnect the small end of the supplied Micro USB cable to the Micro USB port on this unit and the otherend to a powered USB port on a computer or a USB power adapter (not included). While charging,the Charging Indicator will light red. When fully charged, the Charging Indicator will turn off.

Charging an Apple or Android Device

To charge an Apple or Android device, simply plug the cable from the external device charging portto the USB port on the Wi-Copy. Then slide the Function switch to the Charge position

4

Operation – Apple Devices

Using the Wi-Copy as a Card ReaderScreens may vary slightly depending on the Apple deviceyou are using.

Download the Wi-Copy App from the Apple App Store.

Insert an SD Card into the SD Card slot OR insert a

USB storage device into the USB port.

Slide the Function switch to the position;

the Power Indicator will light and after a short

while, the indicator will blink blue and the

Wi-Copy will be available. Tap the Settings App

on your i-device, then select Wi-Fi. From this

Wi-Fi list, select Wi-Copy_xxxxxx

(x represents random numbers/letters).

1

2

3

5


Tap the Wi-Copy App to open the App. You will see five items:

Select the SD Card or Flash Drive to view the contents or select

one of the categories and the valid files will appear. See below

for valid file formats.

Video: M4V, MP4, MOV

Photos: JPG, BMP, PNG

Music: MP3, WAV, AAC

Documents: PDF, DOC, PPT, TXT, HTM, XLS, .KEY, .PAGES, .NUMBER

Tap one of the files and it will play/appear right in the

Wi-Copy App!

If you try to play a non-valid file, “Unable to Open” will

appear on the screen.

Miscellaneous Editing Options: While a list (music, photo, SDCard, etc.) appears, tap Edit, tap on the desired file(s) and then click the icon. This will bring up buttons which perform the following functions:Save to Library (Photos only): Tap to save the photo to yourdevice photo library.Download: Tap to download the file into your Collections.Move: Tap to move the file into another folder.Export: Tap to export the file into other APP like Dropbox.Rename: Tap to rename the file.Delete: Tap to delete the file.Cancel: Tap to cancel.

4

5

6

6


Create a Folder: While a list (music, photo, SD Card, etc.) appears,

enter SD or USB device, tap Edit and then tap the icon.

This will allow you to create and name a new folder.

Sort: While a list (music, photo, SD Card, etc.) appears,

enter SD or USB device, tap the icon to bring up

the sorting options (Name, Type or Date).

7

8

7


Viewing or Uploading Files in Your Collections

Screens may vary slightly depending on the Apple deviceyou are using.

Turn on the unit and open the Wi-Copy App as previously described.

Tap the Collections icon at the bottom of the screen and the

Collections screen will appear.

If any files have been saved to your collection, simply tap on one to

play/view it in the Wi-Copy App.

To Upload a file from the photos on your device to an SD Card/Flash

Drive, tap Upload From Camera Roll . Select photo(s) then tap Done.

Select where to upload the files to, then tap Done and the unit will

upload the files.

Note: Tap the Status icon at the bottom of the screen to show the

status of any transferring files.

1

2

3

8


x Miscellaneous Editing Options: While in the Collection list, tap

Edit , tap on the desired file(s) and then click the icon. This will

bring up buttons which perform the following functions:

Upload: Tap to upload the file into another location.

Move: Tap to move the file into another folder.

Export: Tap to export the file into a program like Dropbox.

Rename: Tap to rename the file.

Delete: Tap to delete the file.

Mail: Tap to email the file.

Cancel: Tap to cancel.

Create a Folder: While in the Collection list, tap Edit and then tap

the icon. This will allow you to create and name a new folder.

Sort: While in the Collection’s list, tap the icon to bring

up the sorting options (Name,Type or Date).

4

5

6

Safety Instructions 1

Location of Controls 2

Charging the Wi-Copy 3

Charging an Apple or Android Device 3

Operation – Apple Devices 4

Operation – Android Devices 10

Operation – Wi-Fi Hotspot 16

Operation – Wi-Fi Repeater 18

Operation – Other Wi-Fi Setting 19

Operation – APP Setting 20

Resetting the Wi-Copy 21

Contacting Us 21

9


Copying Files From One Device to AnotherScreens may vary slightly depending on theApple device you are using.

Insert an SD Card into the SD Card slot AND

a Flash Drive into the USB port. Turn on the

unit and open the Wi-Copy App as previously

described.

Click on the device you want to copy a file from, USB or SD.

To Copy: Tap Edit,tap the icon, then tap on the desired file(s).

Tap Copy and then tap the other drive. After choosing the folder,

click Done to finish copying the file.

Note:Tap the Status icon at the bottom of the screen to show the

status of any transferring files.

1

2

3

10

Operation – Android Devices

Using the Wi-Copy as a Card ReaderScreens may vary slightly depending on the Android deviceyou are using.

Insert an SD Card into the SD Card slot OR insert a USB storage device into the USB port.

Slide the Function switch to the position ; the Power

Indicator will light and after a short while, will blink blue

and the Wi-Copy will be available. Enter the Settings App on

your device, then select Wi-Fi. From this Wi-Fi list, select

Wi-Copy_xxxxxx (x represents random numbers/letters).

Download the Wi-Copy App from the Google Play Store. 1

2

3

11


Tap the Wi-Copy App to open the App. You will see five items:

Videos, Photos, Music, Documents and the SD Card/USB storage

device you inserted.

Select the SD Card or USB storage device to view the contents or

select one of the categories and the valid files will appear.

See below for valid file formats.

Video: Please download MX Player or MoboPlayer to watch

videos on this App.

Photos: JPG, BMP, PNG

Music: MP3, WAV, AAC

Documents: PDF, DOC, PPT, TXT, HTM, XLS

Note: For HTC/Samsung Phone, please use the built-in Polaris

Office App. For other Android phones, please download

OliveOffice.

Tap one of the files and it will play/appear right in the

Wi-Reader App! See step 4 for valid file types. If you try to

play a non-valid file, an error will appear on the screen.

Miscellaneous Editing Options: While a list (music, photo, etc.)

appears, tap the icon in list (top right), tap on the desired file

and then click the icon (top left). This will bring up buttons

which perform the following functions:

Download: Tap to download the file into your Collections (see

page 14).

Export: Tap to export the file into a program like Dropbox.


Move: Tap to move the file.



4

5

6

12

7


Create a Folder: While a list (music, photo, SD Card, etc.)

appears, tap the icon at the top left. This will allow

you to create and name a new folder.

13


Viewing or Uploading Files in Your CollectionsScreens may vary slightly depending on the Android deviceyou are using.

Turn on the unit and open the Wi-Copy App as previously

described. Tap the Collections icon at the bottom of the

screen and the Collections screen will appear.

If any valid files have been saved to your collection, simply tap

on one to play/view it in the Wi-Copy App.

To Upload a file from your device to an SD Card/Flash Drive,

tap Upload From Smartphone. Select file(s), tap Choose

target folder then tap Upload and the unit will upload the files.

Note: Tap the Status icon at the bottom of the screen to

show the status of any transferring files.

1

2

3

14


Miscellaneous Editing Options: While in the Collection list,

tap the icon (top right), tap on the desired file and then click

the icon (top left). This will bring up buttons which perform

the following functions:

Upload: Tap to upload the file into another location.

Export: Tap to email the file.


Move: Tap to move the file into another folder.



While in the Collection list, tap the icon to

create a new folder.

4

5

15


Copying Files From One Device to Another

Screens may vary slightly depending on the ANDROID device you are using.

IInsert an SD Card into the SD Card slot AND a

Flash Drive into the USB port. Turn on the unit

and open the Wi-Copy App as previously described.

To Copy: Tap the icon (top right), tap on the desired file and

then click the icon (top left). Tap Copy and then tap the

other drive. After choosing the folder, click Copy to finish copying

the file.

Note: Tap the Status icon at the bottom of the screen to show

the status of any transferring files.

Click on the device you want to copy a file from, USB or SD.

1

2

3

16

Operation - Wi-Fi Hotspot

Creating a Wi-Fi HotspotScreens may vary slightly depending on the

device youare using.

Plug internet cable into the RJ-45 jack.

It is recommended to keep the Wi-Copy

connected to the computer or power adapter;

extending the usage time as Wi-Fi hotspot.

Slide the Function switch to the position; the Power Indicator

will light and after a short while, the indicator will blink blue

and the Wi-Copy will be available. Tap the Settings App on

your iOS device, then select Wi-Fi (on Android, go to Wi-Fi setting).

From this Wi-Fi list, select Wi-Copy_xxxxxx (x represents random digits).

Open the device browser then enter “10.10.1.1” in the

space provided for the url. The File Server screen will appear.

You can access your shared partitions here (devices plugged

into the Wi-Copy unit).

Select Settings at the top right of the screen.

1

2

3

4

17

Operation - Wi-Fi Hotspot

Tap Gateway (WAN).

The WAN Interface will appear.

If connecting through a hotel room internet connection or

through a home network, select DHCP from the WAN Access

Type pull down menu.

If connecting through an ASDL modem, select PPPoE from

the WAN Access Type pull down menu and enter your

username/password.

Click Apply and the Wi-Copy will reboot. You may have to

change the Wi-Fi to the Wi-Copy_xxxxxx again. Enjoy the

wireless network!

5

6

7

18

Operation - Wi-Fi Repeater

Wi-Fi RepeaterThis unit can also be used as a Wi-Fi Repeater. This feature will allow you to extend the signal by receiving the signal and then sending it out again, thus extending the range.

Connect the Wi-Copy to a powered USB port on a computer or a USB power adapter.

Slide the Function switch to the position; the Power Indicator will light and after a short while, the indicator will blink blue and the Wi-Copy will be available. Tap the Settings App on your iOS device, then select Wi-Fi (on Android, go to Wi-Fi setting). From this Wi-Fi list, select Wi-Copy_xxxxxx (x represents random digits).

Open the device’s browser, then enter “10.10.1.1” in the space provided for the url. The File Server screen will appear. You can access your shared partitions here (devices plugged into theWi-Copy unit).


Tap Wi-Fi Repeater; the Repeater screen will appear. Select the desired network to extend.

1

2

3

4

5

19

Operation - Other Wi-Fi Setting

Other Wi-Fi Setting Screen OptionsSee below for instructions on how to change the language, Reset to Default, WiFi Setting, and much more:

Plug internet cable into the RJ-45 jack.

Slide the Function switch to the position; the Power Indicator will light and after a short while, the indicator will blink blue and the Wi-Copy will be available. Tap the Settings App on your iOS device, then select Wi-Fi (on Android, go to Wi-Fi setting). From this Wi-Fi list, select Wi-Copy_xxxxxx (x represents random digits).

Open the device’s browser, then enter “10.10.1.1” in the space provided for the url. The File Server screen will appear. You can access your shared partitions here (devices plugged into the Wi-Copy unit) or tap the Wi-Copy icon at the top left.


Tap an icon to perform the following:Multiple Language: Tap to change the language.Reset to Default: Tap to reset the Settings to Default.WiFi Setting: Tap to change the specific WiFi Settings, such as the WiFi password or WiFi SSID.Admin. Password: Tap to setup or change a username and password.Advanced Settings: Tap to change the Advanced Settings. It is not recommended to change these unless requested by Apotop.Home: Tap to return to the File Server screen.

1

2

3

4

5

20

Operation - APP Setting

Tap the Settings icon at the bottom right of the main Wi-Copy screen to bring up the Settings screen.

The items listed on this screen perform the following:

App Version: This is the App version.

About Wi-Copy: If connected to the internet, tap this to see more information about the Wi-Copy.

Send Feedback: Tap to send feedback about Wi-Copy or the Wi-Copy app.

Device Setting: Tap to enter the Settings.

Connect Setting (iOS only): Used by iOS, you will not need this unless instructed.

Clean Thumbnail Cache: Tap to clean the Thumbnail Cache which takes space on your device.

Check Storage Space: Tap to view the Free Space and the Collection Files Used Space.

Check Backup Message (iOS only): Tap to view the Tempo/Results of the Copying.

Logout (Android only): Tap to log out.

iOS Android

21

Resetting the Wi-Copy

If you are having trouble or experiencing erratic

operation with the Wi-Copy, perform the following

while the unit is on and the blue Wi-Fi indicator is lit:

Insert a pin or similar pointed object, such as a paper

clip, into the Reset button for three to four seconds

until the blue Wi-Fi indicator turns off, then release.

This will reset the Wi-Copy to its default settings.

You can also set the settings to their default position

by selecting Reset To Default.

Contacting Us

If you have any trouble, please try resetting the unit as described in the previous section.

If that does not work, you can contact us by using the Send Feedback option in the Settings

or by visiting www.apotop.com/tw.