You will need to figure

out where all of these

parts go, measure up,

tek screw and bolt them

all on and still hope

Haunch Brackets

Double Garage 6

American Barn 8

Small Industrial Shed 14

Large Industrial Shed 16

Double Garage 3

American Barn 4

Small Industrial Shed 5

Large Industrial Shed 16

End Girt Brackets

Double Garage 8

American Barn 42

Small Industrial Shed 20

Large Industrial Shed 20

Mullion Fixing AnglesDouble Garage 2

American Barn 2

Small Industrial Shed 2

Large Industrial Shed 2

Eave Purlin

Brackets

Double Garage 6

American Barn 16

Small Industrial Shed 14

Large Industrial Shed 18

Double Garage 3

American Barn 4

Small Industrial Shed 5

Large Industrial Shed 16

Apex Brackets

Top Hat Brackets

Roller Door Brackets

Steel Building System utilises emerging 'Laser CuttingTube Technology'PATENTED

The laser cut joints ensure unparalleled accuracy over traditional fabrication processes.

WITH IT S EASY ASKWIKSURE ’ A- -B CA- -B C

Kwiktite bolts - thread rolled connections withsimple use of a rattle gun into pre-lasered holes

Through a national network of business units we are able to offer a broad range ofintegrated solutions all stailored to the suit project .

Time Saving DesignsPre-designed Buildings, Covered Learning Areas and Walkways flat packed•with all components ready for assembly on site.

Design & Technical SupportVast experience in material and product design utilising steel and related•materials available to support specific projects.

Value AddPatented framing system using RHS tube t costs of supplyo reduce•and assembly time.Reduced waste through access to customised lengths direct from the Mill.•

Stock On-HandStock holding of pre-designed elements of the system ensure that•products are available when required on site.

System available in Orrcon Steel’s innovative MAXI-TUBE ® ZM275 zinc alloy coating for great durability in corrosive environments.

Paul CooperKWIKSURE BUILDING SYSTEM

https://youtu.be/CCkSJLLkMzc

Mob +61 423 050 845Ph +61 7 3459 1224PO Box 7531Redland Bay Queensland 4165Australia

“Traditional purlin shed: Cold-formed C-channel sections have been used in portal frame sheds for a wide range of domestic, agricultural and light industrial applications for many years in Australia and New Zealand.Professor JE Mills, University of South AustraliaTesting has demonstrated that many of the joint designs widely used in practice do not achieve the moment capacity of the sections and fail prematurely.”

The brackets are the weakest link in the frame and together with the quantities required in a shed build makes it time consuming and expensive to assemble.The Kwiksure System eliminates the following:

KWIKSURE PATENTED FRAME

COLUMNSRAFTERS

END WALL MULLIONSBASE BRACKETS

C SECTION SHED

COLUMNSRAFTERS

END WALL MULLIONSL/H HAUNCH BRACKETSR/H HAUNCH BRACKETS

APEX BRACKETSEND GIRT BRACKETS

KNEE BRACE BRACKETS EACH ENDAPEX BRACE BRACKETS EACH END

BASE BRACKETS

0

1

2

3

4

5

6

QUANTITY

GENERAL PART QUANTITIES

C SECTION FRAME KWIKSURE

C section frames generally have 5 times more partsand 5 times more fasteners than a RHS Kwiksureframe shed.

Columns and Rafters are already profiled to accommodate attachment to each other by patentedmeans of connection with use of specified fasteners only as the Kwiksure frame uses no brackets andrequire no welding BUT provides superior connection than either of the current C frame or welded frame.

Once you have figured out what all the parts are for & where theyare to be attached, it will take you several hours to bolt all yourbrackets and cleats to the shed frame members and then bolt theframe together.

There are no Apex brackets, Haunch brackets and cleats to be bolted or welded to columns, rafter members.Purlins are self locating, stable and easily affixed with our specialised fasteners with a minimum of fuss.Pre-laser cut holes ensure the quality of alignment and reduces the skill level required to assemble the frame.

If building a barn or large shed, it can take a day or two just to sortout the brackets and to bolt to adjoining members before the framecan be erected. Very large sheds require bolting up back to backpurlins, haunch plates, apex plates and braces that will severelyimpact the erection cost

Small or large sheds require no difference in general methodology. Simply fasten and erect!

MEASURE AND PLACEMENT OF SHED

To start erecting the shed, the base brackets need to be bolted tothe slab. To do this the distance in from the slab edge allowing forthe offset distance of the side girts. The centres between the bayshave then to be marked allowing for the offset allowances of thegirts.CONFUSED?Standing of the C section frame requires extensive manual handlingwith temporary bracing to stabilise each portal thus requiring labourand bracing materials in the process

Simply measure end to end your bay sizes. If 12m long you simply mark out 4m centres for each 4m bayon each side.Base plates are simply bolted down at the edge of the slab OR the base plates can be pre assembled tothe base of the columns and the entire portal stood into place.

The Kwiksure frame is rigid and naturally stable requiring little or no bracing

STANDING FRAME

C section frames are inherently unstable due to flexing, twisting &rotation of the members. Connecting of parts during the erectionprocess relies heavily on extensive bracing during this erectingprocess

The Kwiksure frame being RHS or SHS is significantly much easier to erect, is stable and safer as thesections are structural in design