Embed Size (px)
Citation preview
7/27/2019 xt17mc1
http://slidepdf.com/reader/full/xt17mc1 1/3
Time / function Function diagramsFunction 12 functions
- 4 controlled via supply voltage See page 16- 8 controlled via control input (Y1)
Time range 0.1s…192hTime setting potentiometer + rotary switch (front)Precision +/- 2%Repeat accuracy +/- 1%Temperature coefficient
Supply specificationsSupply voltage 24…240VAC/DCToleranceConsumptionSupply terminals A1 – A2
Ouput specifications Time ranges
Contact 1 changeover contactRated current 10A / AC1 0.1…1s 6…60minBreaking capacity 2500VA / AC1, 240W / DC 0.3…3s 18…180minInrush current 1.5…15s 0.6…6hSwitching voltage 250VAC / 24VDC 3…30s 1.2…12hMin. breaking capacity DC 6…60s 2.4…24hOutput indication red LED 18…180s 4.8…48hMechanical life > 30x10
61.5…15min 9.6…96h
Max. switching rate, mechanical 72.000 cycles/h 3…30min 19.2…192hMax. switching rate, full load 360 cycles/h
Control Connection diagramControl voltage 24…240VAC/DC
Consumption of inputImpulse lengthControl terminals A1 – Y1
General dataReset time 60msMax. cable connections 2.5mm
2
Mounting on DIN-rail ( EN 50022 )Mounting position any ( no restrictions )Electrical strenght 2.5kVOvervoltage category IIIPollution degree 3Protection degree IP 20
Operating temperature -20…50°CStorage temperauture -50…85°CDimensions 91.5 x 17.5 x 98mmWeightStandards EN 50081-1, EN 50082-1
EN 60204-1, EN 61010-11
XT-17I-CMulti function 12 functionsMulti voltage 24…240Vac/dc
Multi time range 0.1s…192hOutput 1CO 10A
XT-17I-C Multifunction, electronic timer relay (1 CO)
13
7/27/2019 xt17mc1
http://slidepdf.com/reader/full/xt17mc1 2/3
A Delay ONConnection of power supply activates the time set. When timehas elapsed the relay is switched ON.
B Delay OFFConnection of power supply, the relay is switched ON andactivates the time set. When time has elapsed the relay isswitched OFF.
I Symmetrical Recycler, start OFFConnection of power supply activates the relay, starting OFF.Contact is switched OFF / ON as long as power supply isapplied. ( time OFF = time ON ).
J Symmetrical Recycler, start ONConnection of power supply activates the relay, starting ON.Contact is switched ON / OFF as long as power supply isapplied. ( time ON = time OFF ).
A Delay ON + time storageConnection of power supply activates the time lap. Make of control Y1 stops the time lap. Break of control Y1, the time lapis continued. When time lap has elapsed, the relay is switchedON. Reset by disconnection of power supply.
+ Control Y1 + Control Y1
B Interval ON + time storageConnection of power supply, the relay is switched ON andactivates the time lap. Make of control Y1 stops the time lap.Break of control Y1, the time lap is continued. When time laphas elapsed, the relay is switched OF. Reset by disconnectionof power supply.
C Delay ON + time storageContinuous power supply. Make of control Y1 activates thetime lap. When time has elapsed the relay is switched ON.Break of control Y1, the relay is switched OFF. ( make of Y1
for minimum the length of the time set )
D Interval ONContinuous power supply. Make of control Y1 activates therelay and time lap. When time has elapsed the relay isswitched OFF. ( make of Y1 for minimum the length of the time
set ).
E Delay ON, by break of controlContinuous power supply. Break of control Y1 activates thetime lap. When time has elapsed the relay is switched ON.Make of control Y1, the relay is switched OFF. ( make of control Y1 for minimum time lap set, to activate the relay ).
F Delay OFF, by break of controlContinuous power supply. Make of control Y1 activates therelay. Break of control Y1 activates the time lap. When timehas elapsed the relay is switched OFF. (Break of control Y1,for minimum time lap set, to switch the relay OFF).
G Delay ON, by make & Break of controlContinuous power supply. Make or break of control Y1activates the time lap. When time has elapsed the relay isswitched ON. (Make / Break of control Y1, for minimum timelap set, to switch the relay ON).
H Delay OFF, by make & Break of controlContinuous power supply. Make or break of control Y1activates the relay and the time lap. When time has elapsedthe relay is switched OFF. (Make / Break of control Y1, for minimum time lap set, to switch the relay OFF).
XT-17I -.. / XT-35I0.. Series Functions
16
7/27/2019 xt17mc1
http://slidepdf.com/reader/full/xt17mc1 3/3
Aust ral ian Dist ri bu to r
Relay Monitoring Systems Pty Ltd6 Anzed CourtMulgrave, Victoria, 3170, Australia
Phone: +61 3 8544 1200Fax: +61 3 8544 1201Email: [email protected]: www.rmspl.com.au
