Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
Summary
The Lego storage bricks (e.g. 5001388) are awesome to store, ... well, ...lego. Unfortunately, in the bottom of the box there are some holes/slotsand eventually small lego pieces will get stuck into them.
This model covers those holes and can be installed with a press-fit. If yourprinter's tolerances are off, a few drops of glue might be a solution.
Toys & Games > Other Toys & Games
storagebrick storagebox lego cover
Print it upside-down so you don't need any supports. I guess the settingsdon't matter too much but I printed it in 0.2mm layerhight.
K Kenneth Henderick
Lego storage brickhole cover
VIEW IN BROWSER
updated 21. 5. 2020 | published 21. 5. 2020
3D M
ODEL
ONLY
168.8 KBupdated 21. 5. 2020
75.7 KBupdated 21. 5. 2020
44.0 KBupdated 21. 5. 2020
The Author has not uploaded any print files.Try to search in User print files section or generate and upload yourown.
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution-ShareAlike
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition
lego_hole_cover.stl
lego_hole_cover.3mf
lego_hole_cover.amf