Neo ProNeo Pro Time Trial Time Trial Crank Cranksetset Service Instructions Service InstructionsService Instructions

Congratulations on your Full Speed Ahead product. Please read these

instructions and follow them for correct use. Since specific tools and

experience are necessary for proper installation, it is recommended that the

crankset be installed by a qualified bicycle technician. These instructions and

instructions for other FSA products are available for download at

http://www.fullspeedahead.com/techdoc

Specification

Item Number / Model Name CK-8855-TT / Neo Pro MegaExo Crankset

Components

Follow the assembly order in the illustration:

ⓞ Bottom Bracket Shell

① Right BB Cup x1

② Alloy Center Sleeve x1

③ Left BB Cup x1

④ Wave Spring Washer x1

⑤ Self-extracting Crank Bolt Assembly

M17 Crank Bolt x1

Black Washer x1

M27 Retaining Nut x1

Silver washer x1

Contact

If you have questions, please visit our web site contact page at :

http://www.fullspeedahead.com/contact

Revision Date 13-Jan-09 www.fullspeedahead.com ZS056-v0 Page 1 of 2

Warranty

Full Speed Ahead (FSA) warrants all FSA, Gravity, Vision and RPM products

to be free from defects in materials or workmanship for a period of two years

after original purchase unless otherwise stated in the full warranty policy. The

warranty is non-transferable and valid to the original purchaser of the product

only. Full warranty policy is available at www.fullspeedahead.com

Crankset installation

1. Ensure that Bottom Bracket (BB) shell ⓞ is clean and free of metal chips, dirt and excess paint.

2. Follow assembly order pictured above. Install the R. BB cup ① and alloy center sleeve ② Tighten the R. BB cup to 400-500 kgf.cm / 40-50 Nm / 354-443 in.lbs.

3. Install the L. BB cup ③. Tighten to 400-500 kgf.cm / 40-50 Nm / 354-443 in.lbs.

4. Insert the Right crank arm and spindle from the right side of BB shell. Take great care not to damage the plastic sleeve of L. BB Cup. It is recommended to lightly grease the sleeve of

bearing cup.

5. Insert the Wave Spring Washer ④ to the left side of BB spindle and install left crank arm by precisely engaging the spindle hole of crank to BB spindle.

6. The self-extracting crank bolt assembly ⑤ is pre-installed. Tighten M17 crank bolt ⑤ to a torque of 450-550 kgf.cm / 45-55 Nm / 390-485 in.lbs.

Full Speed Ahead, USA

12810 NE 178th St. Suite 102

Woodinville, WA 98072

Tel: 1_425_488_8653

Fax: 1_425_489_1082

Full Speed Ahead, Europe

Via Del Lavoro, 56

20040 Busnago, Milan, ltaly

Tel: +39_039_688_5265

Fax: +39_039_682_3336

TH INDUSTRIES / FSA Asia

487 Ko-Chung Rd. Ta-Li City 412

Taichung County, Taiwan

Tel: +886_4_2406_8641

Fax: +886_4_2406_8076

Revision Date 13-Jan-09 www.fullspeedahead.com ZS056-v0 Page 2 of 2