Pick and Pack

WHS CartonMaterial

Bin

Inner Pack RequiredPicked Inner PackQty per Inner Pack

Pick and Pack screen

Input Field Field reference Field Type Mandatory Paramenter ID1 Ware House LTAP-LGNUM Single Yes LGN2 Carton No VEKP-EXIDV Single Yes3 Material MARA-MATNR Single Yes4 Material Description MAKT-MAKTX Single5 Bin LTAP-NLPLA Single6 Inner Pack Reqd LTAP-VSOLM7 Picked Inner Pack LTAP-VSOLM yes8 Qty/Inner Pack LTAP-VSOLM yes

Validations

1 Ware House Number : Entered WHS Should be exist check in the T300 by passing Ware House Number2 Carton No: carton number has to be in VEKP , so validate VEKP-exidv with Carton number and Ware house number vekp-lgnum

If doesnot exist give error message " Carton does not exist "3 Material : Material has to exixting in MARA-MATNR and shoud be in Carton

if doesnot exist give error message " Scanned UPC not in the Carton "

Logic 1. when scaaning the carton it will check the field VEKP-SEALN4If it is initial , create the Transfer orderFor create the T.O pass the values of carton details of Which is fetched from VEPO

and update the VEKP-SEALN4 By the creates T.O numberand dest. Strorage bin as " LBL" And Storage bin "LEBELING" TO BY "L_TO_CREATE_DN"

If it VEKP-SEALN4 is not initial.2. Fetch the values from LTAP by passing VEKP-SEALN4 and get the values by sending the T.O number and Warehouse number of Carton

3. Send the Material and MEINH = "INP" to MARM and fetch the values umrez and umrendisplay the display the umrez/umren as Qty/Innner Pack4. Calculate the Inner Pack Reqd as LTAP-VSOLM / qty per inner packand send the material to MAKT get the MAKTX AS Material Des5. When scan the material , if the material is in Cartonit will calculate one scan as One Picked inner Packif Picked inner pack is equal to Inner Pack Reqd , it will confirm the T.O Line item by 'L_TO_CONFIRM' by sendind particular T.O and Line Item6. If Picked Inner Pack is more than inner Pack Reqd display the error message "Picked Qty should not more than required qty "if it is equal it will confirm the T.O Line Item7. After Confirm it will propose the next un confirmed T.O line Item

and display the values VLPLA as Bin , and VLTYP as Strorage type

F4 Help

Ware House Number : Entered WHS Should be exist check in the T300 by passing Ware House NumberCarton No: carton number has to be in VEKP , so validate VEKP-exidv with Carton number and Ware house number vekp-lgnum

2. Fetch the values from LTAP by passing VEKP-SEALN4 and get the values by sending the T.O number and Warehouse number of Carton

3. Send the Material and MEINH = "INP" to MARM and fetch the values umrez and umren

if Picked inner pack is equal to Inner Pack Reqd , it will confirm the T.O Line item by 'L_TO_CONFIRM' by sendind particular T.O and Line Item6. If Picked Inner Pack is more than inner Pack Reqd display the error message "Picked Qty should not more than required qty "

Pick and Pack screen

Input Field Field refer Field Type MandatoryParamenterF4 Help1 Ware House LTAP-LGN Single Yes LGN2 Carton No VEKP-EXIDSingle Yes3 Material MARA-MASingle Yes4 Material Description MAKT-MAKSingle5 Bin LTAP-NLPLSingle6 Inner Pack Reqd LTAP-VSOLM7 Picked Inner Pack LTAP-VSOLM yes8 Qty/Inner Pack LTAP-VSOLM yes