7/27/2019 2011_SiloFluidizer_ProductSheet.pdf
1/2
Silo Fluidizer
The Original & Best Disk FluidizerAeration loosens up the product allowing it to floweasier. Minimum back pressure puts air energy whereit is need the most in the silo.
Directional Air Flow. The Fluidizer disk forces airto move along the bin wall freeing up product andassuring good cleanout.
Gentle Vibration keeps the product flowing withoutallowing it to compact or plug.
No Airline Plugging. Disk seals tightly against the silowall and prevents airline plugging.
Robust Design. will not tear, pick up moisture & isunaffected by temperatures up to 450 F (230 C).
Install From Outside. Available EZ-In (Easy-In) kits forinstallation without getting inside the bin or replacing out
dated screen pads.
Keep Dry Bulk Materials MovingSolimar Pneumatics offer a family of Silo Fluidizers that promote the
discharge of dry products from storage silos, dust collectors, weigh
bins and IBCs. Solimar Fluidizers enable a uniform flow of most dry
bulk materials through aeration and hopper wall vibration that helps
prevent bridging, rat holing and compacting.
Material Aeration
Wall Vibration
Compressed
Air
Hopper cutaway shows Fluidizer in use.
Material Compatible.Multiple disk options,
including silicone rubber food grade/FDA
approved (blue or white), high temperature(orange), Metal Detectable (gray) & EPDM
(black or white).
Since 1985
Insist on genuine Solimar disks withthe trademarked Radial Ridge Design.
Patented Fluidizer used with over 120 different materialtypes in 70 countries around the world.
Solimar Pneumatics | Minneapolis, MN 55432 USA | 1.800.233.7109 | P: 763.574.1820
F: 763.574.1822 | email: [email protected] | www.solimarpneumatics.comSolimar, Solimar-USA and the Radial Ridge Design are trademarks of Solimar Pneumatics
7/27/2019 2011_SiloFluidizer_ProductSheet.pdf
2/2
4 Standard Fluidizer 2 Mini Fluidizer
Silo FluidizerTechnical Data
Engineering Assistance.Fax or e-mail a sketch ordrawing of your chamber,along with a description oyour bulk material and wewill provide a recommendnumber and placement ofFluidizers for your applicatthe next day.
Since 1985
Series
4300
4400
4500
MINI
A B C D E AirlineOptions
1/4NPT
1/2NPT
7/8(22 mm)
1-3/16(30 mm)
3(76 mm)
3/8-1/2(10-12 mm)
Tubing
1/2
NPT
3/4
NPT
1-1/16
(27 mm)
1-1/4
(32 mm)
3 -1/16
(78 mm)
1/2-3/4(13-19 mm)
TubingorHose
3/4NPT
1NPT
1-3/8(35 mm)
1-1/4(32 mm)
3-1/4(83 mm)
3/4-1(19-25 mm)
Hose
1/8NPT
NA1/2
(13 mm)
9/16(14 mm)
1-1/2(38 mm)
1/4(6 mm)
Tubing
DiskMaterial
Silicone
Silicone
Silicone
Silicone
StemMaterial
Steel
Aluminum
Stainless
Steel
Steel
Aluminum
Stainless
Steel
Steel
Aluminum
Stainless
Steel
Stainless
Steel
Part #
4300
4301
4302
4303
4304
4305
4400
4401
4402
4403
4404
4405
4500
4501
4502
4503
4504
4505
4804
4805
Disk Color
Blue
White
Blue
White
Blue
White
Blue
White
Blue
WhiteBlue
White
Blue
White
Blue
White
Blue
White
Blue
White
Series AIRFLOW REQUIREMENTS
4300 Capacity 10 20 CFM @ 20 30 PSI (15 30m/h @ 1-2 bar)
4400 Capacity 25 40 CFM @ 10 20 PSI (40 70m/h @ 0.7-1.5 bar)
4500 Capacity 30 50 CFM @ 5 10 PSI (50 85m/h @ 0.3-0.7 bar)
MINI Capacity 2 3 CFM @ 20 30 PSI (3.5 5m/h @ 1-2 bar)
Mini
Fluidizer
Standard
Fluidizer
Solimar Pneumatics | Minneapolis, MN 55432 USA | 1.800.233.7109 | P: 763.574.1820
F: 763.574.1822 | email: [email protected] | www.solimarpneumatics.com Solimar Pneumatics
Recommended