Transcript
Page 1: 436-0013-19 FLIR VUE PRO IDD rev PIN 1 A ACCY PIN 7 C uSD CARD SHOWN IN EJECTED STATE.592 15.04 1.181 30.00 CG-Z REFER TO CG TABLE 2X M2X0.4-6H 4.0 [.157] BLUETOOTH RADIO ANTENNA

1.75044.45

1.75044.45

.75019.05

.87522.23

CG-YREFER TO CG TABLE

CG-XREFER TO CG TABLE

B

.59215.04

.3007.62

.94524.00

2.46562.61

1.53739.04

.3368.53

.3158.00

.1483.75

.74518.91

.45311.50

2X M2X0.4-6H 4.0 [.157]NEAR AND FAR SIDE

USB PIN 2ACCY PIN 1

ACCY PIN 7A

C

uSD CARD SHOWN INEJECTED STATE

.59215.04

1.18130.00

CG-ZREFER TO CG TABLE

2X M2X0.4-6H 4.0 [.157]

BLUETOOTH RADIO ANTENNA.OBSTRUCTION OF REAR COVERWILL REDUCE BT PERFORMACEAND RANGE.

1.33934.00

.74518.92

1.72043.69

.86922.08

1/4-20 UNC -1B6.35 [0.25] MAX DEPTH

1.35634.44

1.52338.69

.2646.70

.82721.00

.40910.40

.0922.35

.1263.20

BLUETOOTH

RECORDSTART / STOP

NOTES: UNLESS OTHERWISE SPECIFIED

INDICATED DIMENSIONS ARE SUPPLEMENTS TO FLIR, IDD, TAU CAMERA1. DRAWING NUMBERS 46-336 AND 46-640 AVAILABLE ON FLIR WEB SITEMODEL SHOWN ILLUSTRATES FLIR VUE, 19MM CONFIGURATION.2. ENVELOPE OF 6.8-19MM MODELS IDENTICAL.CONNECTOR INTERFACE: USB MINI-AB RECEPTICLE, 10-PIN, GOPRO HERO 3/4 COMPATIBLE.3.INPUT POWER RANGE 4.8-6VDC, 500mA. EXCEEDING THIS SPECIFICATION WILL DAMAGE4.THE CAMERA AND VOID THE WARRANTY.PART CAD GENERATED. ALL DIMENSIONS NOT SHOWN ARE DERIVED FROM SOLID MODEL.5.

REVISIONSZONE REV DESCRIPTION DATE APPROVED

100 RELEASED PER ECN 127230 09/25/2015 MK101 ECN 193714 04/25/2015 MK102 ECN 194353 07/07/2016 MK

2 134567

DWG NO. SH REV436-0013-19 1 102

8

8 7 6 5 4 3 1

A A

B

C

D

C

D

102135.740 GRAMS

MKENT

MKENTFLIR VUE PRO

9Hz064Y2

D

SEE NOTE 1

SEE NOTE 2

2:1 1 2

INTERPRET DRAWING PER ASME Y14.5M-1994

----------------------------------------------UNLESS OTHERWISE SPECIFIED

SURFACE ROUGHNESS .8 µm.X = .25.XX = .13

ANGULAR = .5FILLET RADII = .13 MAX

DWG NO. REV

SHEET OF

PROJECT NO.

DATEAPPROVALS

DWN

CHK

DSGN

PRINTED:SCALE

CAGESIZE

TITLE

FLIR Systems, Inc.70 Castilian DriveGoleta, CA 93117

ENG

APPCALC WT:

UNLESS OTHERWISE SPECIFIED ALLMEASUREMENTS ARE IN MM.

ALL DIMENSIONS IN [ ] ARE INCHES.DO NOT SCALE DRAWING.

FINISH

MATERIAL

AMURCHISON 9/24/15

MKENT 05/05/2015

THIRD ANGLE PROJECTION

436-0013-19

4/25/16

9/24/15

7/7/2016SOLIDWORKS MODEL: 436-0013-00 FLIR VUE PRO ASSEMBLY

102436-0013-19

1REV

SHDW

G NO.

MODEL REVISION: 102

METRIC

FLIR SYSTEMS, INC.

EAR LEVEL 1. NOT CONTROLLED FOR EXPORT PURPOSES.

Page 2: 436-0013-19 FLIR VUE PRO IDD rev PIN 1 A ACCY PIN 7 C uSD CARD SHOWN IN EJECTED STATE.592 15.04 1.181 30.00 CG-Z REFER TO CG TABLE 2X M2X0.4-6H 4.0 [.157] BLUETOOTH RADIO ANTENNA

CAMERA MOUNT ASSEMBLY ORDER

DOWEL PINS FACE CAMERAINTERFACE WITH LENS HOLDER

TIGHTEN LENS NUT 'HAND TIGHT'APPROX 3.2Ncm [4.5 oz-in]

USE OF RETAINING COMPOUND SUCH AS VIBRA-TITE VC-3RECOMMENDED. DUE TO LARGE DIAMETER AND THREADAREA VERY LITTLE IS REQUIRED TO INHIBIT NUT BACK OFF.

.69417.63

.1162.95

.1303.30

.3629.20

B

.60915.47

.2005.08

.3097.85

.3007.62

.2025.12

.60015.24

C

A

NOTES: UNLESS OTHERWISE SPECIFIED

INDICATED DIMENSIONS ARE SUPPLEMENTS TO FLIR, IDD, TAU CAMERA1. DRAWING NUMBERS 46-336 AND 46-640 AVAILABLE ON FLIR WEB SITEMODEL SHOWN ILLUSTRATES FLIR VUE, 19MM CONFIGURATION.2. ENVELOPE OF 6.8-19MM MODELS IDENTICAL.CONNECTOR INTERFACE: USB MINI-AB RECEPTICLE, 10-PIN, GOPRO HERO 3/4 COMPATIBLE.3.INPUT POWER RANGE 4.8-6VDC, 500mA. EXCEEDING THIS SPECIFICATION WILL DAMAGE4.THE CAMERA AND VOID THE WARRANTY.PART CAD GENERATED. ALL DIMENSIONS NOT SHOWN ARE DERIVED FROM SOLID MODEL.5.

2 134567

DWG NO. SH REV436-0013-19 2 102

8

8 7 6 5 4 3 1

A A

B

C

D

C

D

102

IDD, FLIR VUE PRO,9Hz

064Y2D2:1 2 2

PIECE PART. REV

SHEET OFPRINTED:SCALE

CAGESIZE 436-0013-197/7/2016

SOLIDWORKS MODEL: 436-0013-00 FLIR VUE PRO ASSEMBLYMODEL REVISON: 102

DWG NO.

SHREV

2 436-0013-19

102

METRIC

FLIR Systems, Inc.70 Castilian DriveGoleta, CA 93117

EAR LEVEL 1 - FLIR SYSTEMS, INC.


Recommended