For more information, please download the BL LIGHTING catalogue
BL LIGHTING. ILLUMINATE EVERYTHING111 - 8838 Heather St. Vancouver, BC. Canada. V6P 3S8 P: 1-604-874-4405 F: 1-604-321-0445 E: [email protected] Copyright © 2017 BL INNOVATIVE LIGHTING. All Rights Reserved.
PROJECT CLIENT TYPE
Solid State Lighting is sensitive to power fluctuationsSurge protection is highly recommended for all LED lighting products and should be on a designated circuit to protect against premature failureLack of surge protection may void your warranty
bllighting.com
INSTALLATION - D01 -
Printed
Local building and electrical codes should beconsulted before installation.
Please note that these instructions are guidelines only and in no way supersede any construction or installation standards.
ATTENTION• There is potential danger of electrical shock when operating electrical components.• Make sure power is turned off before installation.• Allow for heat dissipation and adequate ventilation.
2
1
SET-UPHow To Position + Configure
How-To Use LV3 Series Interface (located on the back of light source):
MODE - Switches through LV3 Series pre-setsLIGHTMIX - A USB port that plugs direct into your PCDMX - A Cat5 Cable that syncs your DMX signal12VDC - Direct plug-in barrel connector.
1.
A. Insert BL fiberOPTIC into fiber port and tighten.B. Slide fiber port into shaft on the LV3 Series and fasten screw.
LED Light Engine Designed for BL fiberOPTIC36W, Mono or Polychromatic, DMX512
BL fiberSOURCE LV3 Series
Daisy-ChainMax. 50FT
Single LoopMax. 50FT
Dead-EndedMax. 25FT
Diameter
5/32”1/4”3/8”1/2”
Max. No. of Strands per Fiber Port
24622
Fiber + Light Source Capacity
BL fiberOPTIC SL SERIESOptional Layouts with LV3 Series
For more information, please download the BL LIGHTING catalogue
BL LIGHTING. ILLUMINATE EVERYTHING111 - 8838 Heather St. Vancouver, BC. Canada. V6P 3S8 P: 1-604-874-4405 F: 1-604-321-0445 E: [email protected] Copyright © 2017 BL INNOVATIVE LIGHTING. All Rights Reserved.
PROJECT CLIENT TYPE
Solid State Lighting is sensitive to power fluctuationsSurge protection is highly recommended for all LED lighting products and should be on a designated circuit to protect against premature failureLack of surge protection may void your warranty
bllighting.com
INSTALLATION - D02 -
Printed
Local building and electrical codes should beconsulted before installation.
Please note that these instructions are guidelines only and in no way supersede any construction or installation standards.
ATTENTION• There is potential danger of electrical shock when operating electrical components.• Make sure power is turned off before installation.• Allow for heat dissipation and adequate ventilation.
LED Light Engine Designed for BL fiberOPTIC36W, Mono or Polychromatic, DMX512
BL fiberSOURCE LV3 Series
BL fiberOPTIC EL SERIESEnd Light Arrangement with LV3 Series
NOTE: End Light Fixture Optional
For more information, please download the BL LIGHTING catalogue
BL LIGHTING. ILLUMINATE EVERYTHING111 - 8838 Heather St. Vancouver, BC. Canada. V6P 3S8 P: 1-604-874-4405 F: 1-604-321-0445 E: [email protected] Copyright © 2017 BL INNOVATIVE LIGHTING. All Rights Reserved.
PROJECT CLIENT TYPE
Solid State Lighting is sensitive to power fluctuationsSurge protection is highly recommended for all LED lighting products and should be on a designated circuit to protect against premature failureLack of surge protection may void your warranty
bllighting.com
INSTALLATION - D03 -
Printed
Local building and electrical codes should beconsulted before installation.
Please note that these instructions are guidelines only and in no way supersede any construction or installation standards.
ATTENTION• There is potential danger of electrical shock when operating electrical components.• Make sure power is turned off before installation.• Allow for heat dissipation and adequate ventilation.
LED Light Engine Designed for BL fiberOPTIC36W, Mono or Polychromatic, DMX512
BL fiberSOURCE LV3 Series
Ceiling Height
8FT10FT15FT20FT
Density (No. Points per SQ.FT)
Light Average Full Dense
“Starfield” Coverage
3211
4322
6543
10865
BL fiberOPTIC MC SERIESMicro-Fiber Bundle Layout with LV3 Series
For more information, please download the BL LIGHTING catalogue
BL LIGHTING. ILLUMINATE EVERYTHING111 - 8838 Heather St. Vancouver, BC. Canada. V6P 3S8 P: 1-604-874-4405 F: 1-604-321-0445 E: [email protected] Copyright © 2017 BL INNOVATIVE LIGHTING. All Rights Reserved.
PROJECT CLIENT TYPE
Solid State Lighting is sensitive to power fluctuationsSurge protection is highly recommended for all LED lighting products and should be on a designated circuit to protect against premature failureLack of surge protection may void your warranty
bllighting.com
INSTALLATION - D04 -
Printed
Local building and electrical codes should beconsulted before installation.
Please note that these instructions are guidelines only and in no way supersede any construction or installation standards.
ATTENTION• There is potential danger of electrical shock when operating electrical components.• Make sure power is turned off before installation.• Allow for heat dissipation and adequate ventilation.
LED Light Engine Designed for BL fiberOPTIC36W, Mono or Polychromatic, DMX512
BL fiberSOURCE LV3 Series