www.toolconnection.co.uk
BODYMATTERSJULY - SEPTEMBER 2015
Infra-red Paint Drying Lamp• Infra-red paint drying lamp,
230v 13A 2000w• Mechanical timer 1-30minutes,
independently switchable• Working distance 500-700mm,
height adjustment 200-2100mm• Temperature Range 40 - 80°C• Wide stable base with 4 castors
two with brakes • CE approved
NEW
€299.00Part No. 92442
EXCL
UDE
VAT
Paintless Dent Removal Kit - 30pc• Essential PDR tools to massage out minor panel damage where the paint surface has not been broken• 30 pieces include: Panel punch, large wedge, S-hook (10), door jammer,
mini air bag and colour coded PDR tools • Professional quality and supplied with a zip up bag
€269.00Part No. 92450
EXCL
UDE
VAT
Part No. 92447
EXCL
UDE
VAT
€2,299.00
Part No. 92452
EXCL
UDE
VAT
€3,499.00
With Nitrogen Generator
Gas Bottle Not Included
NEW
With Nitrogen Gas BottleNEW
Nitrogen Plastic Welder• The most innovative system for the repair of plastic parts• Compatible with almost every plastic type used in the
automotive industry• Allows the welding of filler material by heating with nitrogen• The welder comes complete with a set of plastic material
and a scraper and roller to finalise the repair• Heats plastic without combustion and therefore
without emitting fumes• 230v, 50Hz, 1600w, 20-650°C• Part No. 92452 has it's own nitrogen generator
which eliminates the need for a gas bottle
NEW
panel repair
2 3
panels and welding
€299.00Part No. 92314
EXCL
UDE
VAT
€169.00Part No. 92430
EXCL
UDE
VAT
Tec Spot Welder• For welding panel pulling pins, pull
washers, squiggly wire• Supplied with a slide hammer
and multi-hook head• Electrodes for pull washers,
pulling bits, squiggly wire• CE approvalIncludes • Pullrite type panel puller• Slide hammer• Multi hook head• Welder electrodes x 4
Pull washers Nails Squiggly wire 10pc
Boron Spot Weld Drill Kit• Applies correct, consistent pressure ensuring accurate spot
weld from first to last• Pneumatic• 1000rpm ensures drills last• Tungsten Carbide 3 point spot buster with multi-layer
coating for super strength and Boron Steel• G frame is ideal for spot removal along an edge.
Remove G frame to gain access away from the edge• Operating pressure 6.3 bar | Bit size 8 | 10mm
Aluminium Hammer & Dolly Set• 3 x Profile Hammers: Bumping, Cross Pein and Finishing, Pick and finishing• 4 x Profile Dollies: Angled, Heel, Thin Toe, Double ended• Specifically designed for panel beating aluminium panels• To avoid cross contamination do not use on steel panels• Hammer handles made from Hickory
Micro Welding Clamp Set - 4pc• Ideal tool set for welding around boot and window
edges, door columns etc• 4 x midget clamps• Micro clamps ideal for tight areas• Size range from
Midget Panel Clamp Set - 5pc• Small clamp set ideal for door panels and pillars• Allows the door to be shut to check alignment• 5 x midget clamps• Midget clamp set• Selected steel
Butt Welding Clamp Set - 4pc• Quick fastening 4 piece clamp set,
suitable for clamping different thicknesses of material
• Aluminium body for lightness• Fully adjustable
Anti-zap Protect - 12/24 Volt• Protect air bag, computer codes etc. when welding• Fit across battery to absorb voltage surge• Complete with HD battery clips and LED• Increase protection to vehicle
electronics when welding• Alarm is fitted to alert the
user if protection fails
Seam Splitter Angled• Separate hard to reach spot welded or
bonded panels• Sharpened on three edges• Side edges allow for side impact to drive
panels apart without damage• 90° end for hard to reach inchweld areas• Quarter panels, sills and any other pinchwelds
Seam Splitter• Separate spot welded and bonded
panels easily with this tool• Sharpened on two edge for
penetration between panels• Allows for impact to drive
panels apart• Super tough alloy steel• Minimises damage• Contoured profile
Panel Gap Controller Set - 3pc• Panel gap controller set with suction pads and flexible arms• Alternating colours for easy selection (5 x 2 colours)• Made from plastic to prevent paint damage• For use on panels and windscreens• Range 1mm - 10mm
Air Suction Dent Puller• The suction cup holds the panel and the
3lb slide hammer pulls out the dents without damage to the paint work
• After connecting the dent puller to the air supply the puller creates and sucks firmly to the body, the sliding hammer is then used to pull out the dent
• Working pressure 70-170psi (5-12 Bar)• Recommended pressure 150psi (10.5 Bar)• 330mm inlet hose set with 1/4"
pneumatic connection• 3 x pad attachments: 60, 120, 150mm diameter
Door Align Head• Ditch that block of wood with this simple tool.
Finally a convenient door aligning tool• Saves space• Fits easily into your tool drawer• No long, heavy bar to store• Uses your breaker bar for leverage
Bodywork Slide Hammer Set | 5.4kgs• The kit contains 8 adaptors for
controlled pulling• Includes a 5.4kgs (12lbs) slide hammer• Made from selected steel• Packed in a blow case
€99.00Part No. 4991
EXCL
UDE
VAT
€24.95Part No. 91254
EXCL
UDE
VAT
€89.95Part No. 92297
EXCL
UDE
VAT
Technical Parameters
Input voltage 1ph 220V 50/60Hz
Input power 800VA
Output voltage 4V
Input current 3.6A
Welding time <1s
Weight 4.5kg
NEW
Consumable Drills Available91172 Boron Spot Weld Drill | 8mm
Tungsten Carbide 3 point 46mm, 800rpm only91937 Boron Spot Weld Drill | 8mm
Tungsten Carbide 3 point 44mm91289 Spot Weld Removal DrillCobolt drill
NEW
€349.00Part No. 91150
EXCL
UDE
VAT
€19.95Part No. 92300
EXCL
UDE
VAT
€8.95Part No. 92299
EXCL
UDE
VAT
€16.95Part No. 92298
EXCL
UDE
VAT
€9.99Part No. 91168
EXCL
UDE
VAT
€29.99Part No. 91144
EXCL
UDE
VAT
€29.99Part No. 92408
EXCL
UDE
VAT
€11.99Part No. 91169
EXCL
UDE
VAT
Welding Blanket - Large• Avoid costly accidental damage during welding,
cutting and grinding jobs• Manufactured from high quality glass fibre fabric• Chemically treated for high temperature resistance• Size: 2m x 1.5m• Also available in small size 1.5m x 1.0m
€129.00Part No. 91148
EXCL
UDE
VAT
• 3 x body hammers made from 1055 medium carbon steel with hickory handles - curved pein and finishing, shrinking, pick and finishing
• 4 x polished dollies made from 1055 medium carbon steel - utility, heel, toe, curved
• Professional quality• Packed in a blow
mold case with eva foam tray
€149.00Part No. 92437
EXCL
UDE
VAT
NEW
Body Hammer & Dolly Set - 7pc
body preparation
4 5
Pulling and storage
Sanding Block Kit - 6pc• Comprehensive sanding block kit for the professional bodyshop• Six shapes for many applications• Suitable for use with 150mm sanding disc• Hook and loop surface for attachment• For concave, convex and flat sanding applications
www.power-tec.co.uk
Masking Paper Dispenser• Essential bodyshop dispensing unit• Easy loading• Wall mounted• Complete with sharp
cutting blade• Tubular steel construction• Takes 1 roll of 450mm
masking paper
Double Density Block• Size: 63mm x 140mm• Fits comfortably in the hand• Adapts to many sanding needs• Grey side is soft and pliable for
sanding irregular surfaces• Black side is stiff for faster
sanding on curved surfaces• Also available in kit:
91991 | 92027
Sanding File - 14 hole• Sanding file with 14 holes for dust free sanding• 70mm x 440mm• Concave, convex or flat sanding• Flexible• Can be used with stiffener
NEW
€34.95Part No. 92415
EXCL
UDE
VAT
Nib File | Coarse• Removes sags and runs
on primer or top coat• Use in one direction only• Clean with a wire brush• Use on dry paint only
€4.49Part No. 91450
EXCL
UDE
VAT
Nib File | Fine• Fixes paint imperfections without re-spraying• Fine pattern removes tiny imperfections• Easily removes dirt and paint
runs from finished paint surfaces• Precision ground file gives uniform results
€4.49Part No. 91449
EXCL
UDE
VAT
Shim Mask - 3pc• Used by professional painters and varnishers,
smart and spot repairers, vehicle refinishers• Patented product• Ideal for paint and lacquer runs, imperfections• Minimising area when sanding paint filled
chips or scratches• Chemical etching of shapes means no burring
of edges giving a perfectly flat finish• Choice of four stencil shapes allows you to
tackle different jobs with the same tool• Manufactured from Stainless Steel 304
which enables it to be reused
NEW€13.95Part No. 92439
EXCL
UDE
VAT
€37.95Part No. 92328
EXCL
UDE
VAT
Light and Straight
Dark and Metallic
€16.49Part No. 91454
EXCL
UDE
VAT
€16.49Part No. 91455
EXCL
UDE
VAT
€79.95Part No. 91402
EXCL
UDE
VAT
Overspray and Fallout | Clay• Works on any painted surfaces, glass, chrome and plastic
• Will not damage or mark the paintwork• For best results use with a little soap and water from a spray bottle
€5.49Part No. 91379
EXCL
UDE
VAT
Alloy Wheel RepairRepainting Stand• Alloy wheel repair/repainting stand • Adjustable height • Angled cone for ease of use • Four rubber wheels/2 locking castor wheels • Box section steel frame • 25kgs maximum weight
Corner Clamp• Manufactured from Chrome Molybdenum• Eliminates the need to use two clamps• For use in confined areas• Professional
Rotamate Panel Stand• An all round panel stand
for the paint shop• Handles doors, bonnets,
grilles and mirrors• Rotates 360° for the
repair and refinish on both sides
• Handles all parts including large panels like bonnets and door
• Suspends all spoilers, grilles and mirrors
• Adapts to any size of panel• Capacity 200lbs
Spray Gun and Hose Hanger• Essential tool hanger for
spray booth• Tapered hose hanger avoids
hose distortion• Soft edge hanger guard• Takes two guns• Tape hook• Magnetic
Economy Trestle• A foldaway trestle for portable storage
of car panels and doors etc• 500lb weight capacity• Folds away when not in use• 10mm thick foam protects panels from damage• Adjustable height facility: 500mm - 1105mm• Tube diameter 28mm x 1090mm wide• Size: 1100 x 880 x 590mm• Material Q235 zinc plated
Hy-Jacks 1 Pair• Suitable for maximum tyre width 305mm• Load rating 680kg single, 1360kg pair• Hydraulic, lifts car in seconds• Great in tight areas or for immobilised vehicles• Move in any direction with a pair• TUV/GS approved• 4" nylon castors• No need for trolley jack
Load Spread Multi Clamp• This clamp has two 120mm jaws and a total grip length of 450mm• Complete with two ‘D’ shackles the jaws can be
positioned anyway along the length of the bar• Heavy duty construction - 8 ton pulling capacity• Ideal for heavy pulls or anywhere a spread pull is required• For use on back panels, sills, flitch, floors etc
NEW
€89.00Part No. 92440
EXCL
UDE
VAT
€59.95Part No. 91890
EXCL
UDE
VAT
€99.00Part No. 92443
EXCL
UDE
VAT
€59.00Part No. 92002
EXCL
UDE
VAT
€33.00Part No.91457
EXCL
UDE
VAT
€229.00Part No. 92438
EXCL
UDE
VAT
€159.95Part No. 92441
EXCL
UDE
VAT
NEW
NEW
NEW
NEW
6 7
special tools consumables
Rain & Light Sensor Removal - 3pc• Removal tools for rain and light sensors for 90% of vehicles• Remove the adhesive with the selected tool using sideways pressure• Three assorted sizes
€16.95m,.Part No. 92366
EXCL
UDE
VAT
Double Sided Tape• Double-sided foam tape• Colour: olive green• Pack 1 roll
HSS Jobber Drill - Imperial• 3/16"• High speed steel• Roll forged• Black | blue fi nish DIN 338• Pack of 25 pieces
Abracs Quick Lock Accessory Pack• 25 pieces quick lock abrasive disc kit• Supplied in a handy assorted storage box• Box contains flap, poly, sanding
and surface conditioning discs• With disc adaptors
Abracs Felt Polishing Disc• Designed to achieve mirror finish on metal
when used with correct compound• Bevelled 115mm Disc
with M14 Thread Size• Must be used with
polishing compounds Part No. 32221 or 32222
• For use on portable electric and pneumatic angle grinders
• Manufactured from high grade special polishing felt
• Pack of 5 pieces
25mm width x 50 metres• Box 36 rolls
50mm width x 50 metres• Box 20 rolls
€3.49Part No. 35309
EXCL
UDE
VAT
€5.49Part No. 35310
EXCL
UDE
VAT
€12.95Part No. 32962
EXCL
UDE
VAT
€29.95Part No. 32109
EXCL
UDE
VAT
€24.95Part No. 32220
EXCL
UDE
VAT
€69.00Part No. 35215
EXCL
UDE
VAT
€69.00Part No. 35216
EXCL
UDE
VAT
25mm Width x 10 metres
50mm Width x 10 metres
from
www.connect-consumables.co.ukwww.lasertools.co.uk
Masking Tape• Masking Tape• Manufacturered by 3M -
Grade 2120• Hi-tack adhesion
€12.95Part No. 32786
EXCL
UDE
VAT
€12.95Part No. 32787
EXCL
UDE
VAT
Size: 4.8 x 19mmPack of 250 pieces
Size: 4.8 x 25.4mmPack of 200 pieces
Aluminium Rivets - Large Flange• Aluminium alloy• DIN 7337
Cobalt Spotweld Drill• 8mm Diameter x 80mm Length• High speed steel and cobalt alloy• DIN 338 €9.95
Part No. 33012
EXCL
UDE
VAT
Mirror Removal Pliers - BMW• Required when renewing the control switch or when removing
the door trim pad on BMW wing mirrors• Spring loaded, soft grip handles• For removing the mirror control
switch from door pad/armrest• Applications:
BMW E12, E21, E23, E24, E28, E30, E31, E32, E34, E36, E38, E39
• OEM 61 1 300
Wiper Arm Puller Set• Supplied with two sets of
legs giving greater versatility across numerous makes and models
• Maximum reach 50mm, width 60mm
• Puller arms are manufactured from Chrome Molybdenum
• Adjustable width
Headlight Adjustment Kit• Includes three tools for adjusting the headlamps• Suitable for many models• The Star T25 is primarily introduced for many
Volkswagen models from 2000 onwards• The 6 and 7mm Hex are popular on many models• The handle can be used as standard screwdriver or
fixed in the T position for extra leverage and access• Manufactured from Silcon Steel• Length: 300mm
Plastic Riveter & 40 Rivets• Head accepts all supplied sizes -
no need to change nose piece• 10 of each rivets: 5 x 15.8, 5 x 17.2,
6.6 x 17.2, 6.3 x 25.2mm• Long reach head for hard to
reach spots 215 x 92 x 30mm• One handed operation• Cushion grips• Locking button
Specialist Bit Set - Air Bags 4pc• 1/4"D x 85mm long• Sizes: 3 x Star Tamperproof
T25, T27, T30, 1 x Hex bit 5mm• Sockets manufactured
from Chrome Vanadium, Bits from S2 steel
• Supplied on a socket rail for storage
Head Light Unit Removal Set• Ideal for removing head light and tail light units without damage• Two piece kit for straight (198mm long) and angled (205mm long) use• For the removal of front and rear tail light units fixed with clips• Not suitable for those fitted with screws or bolts• Prevents scratching and cracking• Non slip handles for ease of use
€12.49Part No. 4805
EXCL
UDE
VAT
€34.95Part No. 5494
EXCL
UDE
VAT
€5.99Part No. 6069
EXCL
UDE
VAT
€19.95Part No. 6246
EXCL
UDE
VAT
€17.95Part No. 5695
EXCL
UDE
VAT
Assorted Plastic Rivets - 235pc• 12 popular application clips• Includes rivets for Chrysler |
Ford and General Motor• For use with many vehicle marques• Supplied in sturdy
presentation box• Box of 235 pieces
€39.90Part No. 4750
EXCL
UDE
VAT
€34.95m,.Part No. 36038
EXCL
UDE
VAT
Induction Heating I 3kw
Heat Inductor kit
Offers valid from 1st July to 30th September. 2015 while stocks last. All prices correct at the time of going to press and exclude VAT. The Tool Connection Ltd reserve the right to change prices or take products off of promotion without prior notice.
The Tool Connection Ltd.Kineton Road | Southam | Warwickshire | CV47 0DRTel: 01926 815000
www.toolconnection.co.uk
The Power-TEC Heat Inductor is an induction heating system that speeds up and simplifies the removal of bonded components (windscreens, plastic trim pieces, bonded badges, stickers, etc), or stuck and seized metal parts such as nuts, bolts, track rod ends, bearings and gears.Quick and easy to use, the Heat Inductor uses the principle of electromagnetic induction. When used with care and following these instructions, it transfers a intense quantity of heat locally with no damage to the surrounding area, whether rubber, plastic or painted surfaces.The flameless technology and zero set up times assures a speedy job and excellent results. The Heat Inductor only heats ferrous metal objects; it will not burn or melt plastic or paint, unless the metal substrate is brought up to a sufficient temperature to damage these materials. The unit is very safe to use when following the safety precautions (see section Safety Precautions).
with three accessories
€1,749.00Part No. 92405
EXCL
UDE
VAT
✔ Includes: heating glove,
glass remover and nut bolt heater
✔ Flameless heat for removing
coroded nuts and bolt
✔ Also removes trim, stickers,
and windows etc
✔ Suitable for mechanics
and bodyshops
€699.00Part No. 5835
EXCL
UDE
VAT
• For bodyshop use to remove trim, decals and graphics etc
Trim Heat Pads
Ideal for track rod ends,
exhausts and for any
seized nuts and bolts
Flameless heat technology
Supplied with one of each
Supplied in a blow mould case
22mm coil, 19mm coil,
universal rope coilEuro plug
The Laser Tools Heat Inductor is manufactured in the UK and was designed from the ground up to work on 230V European mains power. Heat Inductor uses induction technology to create flameless heat. This accurately concentrates the heat into the area you are working on, only heating the metal. Therefore minimises the risk of damage and reduces ‘cool off’ periods saving time and money. It is an invaluable tool for working with easily damaged components. The magnetic field passes through non-metals such as glass and trim and heats the metal underneath.
€89.95Part No.5840
EXCL
UDE
VAT