Characteristics of Power Semiconductor Devices | Power Circuits
Power CircuitsPresenting the many facets of modern power electronics engineering.
Characteristics of Power Semiconductor Devices
March 24, 2015 admin Leave a comment
● Diode – Current ratings from under 1 A to more than 5000 A. Voltage ratings from 10 V to 10 kV or more. The fastest power devices switch in less
than 20 nanoseconds, while the slowest require 100 microseconds or more. The function applies in rectifiers and DC-DC circuits.
● BJT – (Bipolar Junction Transistor) Conducts collector current (in one direction) when sufficient base current is
applies. Power device current ratings from 0.5 A to 500 A or more; voltages from 30 V to 1200 V. Switching
times from 0.5 microseconds to 100 microseconds. The function applies to DC-DC circuits; combinations with
diodes are used in inverters.
● FET – (Field Effect Transistor) Conducts drain current when sufficient gate
http://powercircuits.net/characteristics-of-power-semiconductor-devices/ (1 of 4) [4/16/2015 7:00:58 PM]
Characteristics of Power Semiconductor Devices | Power Circuitsvoltage is applied. Power FETs have a parallel connected reverse diode by
virtue of their construction. Ratings from about 1 A to about 100 A and 30 V up
to 1000 V. Switching times are fast, from 50 nanoseconds or less up to 200
nanoseconds. The function applies to DC-DC conversion where the FET is in
wide use, and to inverters.
● SCR – (Silicon Controlled Rectifier) Conducts like a diode after a gate pulse is applied. Turns off only when current becomes zero. Prevents current flow until a
pulse appears. Ratings from 10 A up to more than 1000 A, and from 200 V up to 6 kV. Switching requires 1 microsecond to 100 microseconds. Widely used for
controlled rectifiers.
● GTO – (Gate Turn-Off SCR) An SCR which can be turned off by sending a negative pulse to its gate terminal. Can substitute for
BJTs in applications where power ratings must be very high. The ratings approach those of SCRs, and the speeds are similar as
well. Used in inverters rated beyond about 100 kW.
● TRIAC – A semiconductor constructed to resemble two SCRs connected in
reverse parallel. Ratings from 2 A to 10 A and 200 V to 800 V. Used in lamy
dimmers, home appliances, and hand tools. Not as rugged as other device types.
● IGBT – (Insulated Gate Biploar
Transistor) A special type of
power FET that has the function
of a BJT with its base driven by
a FET. Faster than a BJT of
similar ratings, and easy to use.
Ratings form 10 A to more than 600 A, with voltages of 600 V up to 1200 V. The IGBT is popular in inverters from about 1 kW to 100 kW.
● MCT – (MOSFET-Controlled Thyristor) A special type of SCR that has the function of a GTO with its gate driven from an FET. Much faster than conventional
GTOs, and easier to use. These devices are entering the market after several years of development.
http://powercircuits.net/characteristics-of-power-semiconductor-devices/ (2 of 4) [4/16/2015 7:00:58 PM]
Characteristics of Power Semiconductor Devices | Power Circuits
Share this:
●
BackgroundLeave a Reply
Categories
● Background● Goals and Methods● History● Switches● Waveforms
Recent Posts
● Overview of Switching Devices● Review of Fourier Series● Characteristics of Power Semiconductor Devices● Kirchhoff’s Voltage and Current Laws● Introduction to Switches
Archives
● April 2015● March 2015● February 2015
http://powercircuits.net/characteristics-of-power-semiconductor-devices/ (3 of 4) [4/16/2015 7:00:58 PM]
Characteristics of Power Semiconductor Devices | Power Circuits
● January 2015
Subscribe to Blog via Email
Enter your email address to subscribe to this blog and receive notifications of new posts by email.
Email Address
Pages
● Contact Us● Privacy Policy
Powered by WordPress and Dynamic News.
http://powercircuits.net/characteristics-of-power-semiconductor-devices/ (4 of 4) [4/16/2015 7:00:58 PM]