DISTRIBUTED BY / DISTRIBUÉ PAR:
1-866-51-NSTAT(67828) www.nstatesd.com
ESD ADJUSTABLE ELASTIC WRIST STRAP
PART NUMBER: NS-106
SPECIFICATIONS:
Construction: Elastic Nylon with conductive plated threads Width: 19mm
Decay Time Resistivity:
Less than 0.05 sec <1.0x106 +/- 5%
Elasticity: Expansion ratio 1.5:1 Snap/Size: 7mm post snap for ground cord Color: Light Blue Meets or exceeds: DOD-HDBK-263, DOD-STD-1686, EOS/ESD Std. No. 1-1987, EN10015/1 CORD ASSEMBLYResistor: One meg ohm (±10%) resistor molded into snap connection Ground Connection: Standard banana plug
Warranty: Warranted for One Year against mechanical and electrical defects. Cord Extension: Full extension greater than 13 feet; Working Length greater than 10 feet.
1-866-51-NSTAT (67828) www.nstatesd.com
ESD ANTI ALLERGIC WRIST STRAP
PART NUMBER: NS-110
SPECIFICATIONS:
Construction: Elastic Nylon with conductive plated threads Width: 19mm
Decay Time Resistivity:
Less than 0.05 sec <1.0x106 +/- 5%
Elasticity: Expansion ratio 1.5:1 Snap/Size: 7mm post snap for ground cord Color: Light Blue Feature: Wrist band without metal part, can prevent rashes. CORD ASSEMBLYResistor: One meg ohm (±10%) resistor molded into snap connection Ground Connection: Standard banana plug
Warranty: Warranted for One Year against mechanical and electrical defects. Cord Extension: Full extension greater than 13 feet; Working Length greater than 10 feet.
1-866-51-NSTAT (67828) www.nstatesd.com
ESD ADJUSTABLE ELASTIC WRIST STRAP
PART NUMBER: NS-300
SPECIFICATIONS:
Construction: Elastic Nylon with conductive plated threads Width: 19mm
Decay Time Resistivity:
Less than 0.05 sec <1.0x106 +/- 5%
Elasticity: Expansion ratio 1.5:1 Snap/Size: 7mm post snap for ground cord Color: Green Meets or exceeds: DOD-HDBK-263, DOD-STD-1686, EOS/ESD Std. No. 1-1987, EN10015/1 CORD ASSEMBLYResistor: One meg ohm (±10%) resistor molded into snap connection Ground Connection: Standard banana plug
Warranty: Warranted for One Year against mechanical and electrical defects. Cord Extension: Full extension greater than 13 feet; Working Length greater than 10 feet.
1-866-51-NSTAT(67828) www.nstatesd.com
ESD METAL BAND WRIST STRAP
PART NUMBER: NS-200
SPECIFICATIONS:
Construction: Made from jewelry quality stainless steel, non-rusting, tested to MIL STD 202 Method 101 Thickness: 3.5mm, average weight 33 grams
Manufactured to 130mm circumference with 5 10mm nylon expansion l links Electrical Properties: Outer band: insulated at 500V per unit millimeter, coating is polyurethane based polymer
Inner band: Conductive - <1.0x104 Elasticity: Expansion ratio 1.5:1 Snap/Size: 7mm post snap for ground cord, non rusting, tested to MIL STD 202 Method 101 Color: Black Meets or exceeds: DOD-HDBK-263, DOD-STD-1686, EOS/ESD Std. No. 1-1987, EN10015/1 CORD ASSEMBLYResistor: One meg ohm (±10%) resistor molded into snap connection Ground Connection: Standard banana plug Warranty: Warranted for One Year against mechanical and electrical defects. Cord Extension: Full extension greater than 13 feet; Working Length greater than 10 feet.
1-866-51-NSTAT (67828) www.nstatesd.com
“D” RING HEEL GROUNDER
PART NUMBER: NS-917RC
SPECIFICATIONS:
Construction: 0.16mm thick, two-layer laminated rubber sole. Inner layer antistatic neoprene, outer black layer is conductive
Neoprene. 1 cm wide, 45cm long nylon ribbon contains 8 electrically conductive yarn
Resistor:
20mm wide black loop material with return hook tip for quick and easy adjustment and operator comfort. ¼ watt, 1meg ohm interior resistor. Sole: black conductive side: 10e3 – 10e5 ohm
Antistatic side: 10e8 – 10e9 ohm Nylon fabric grounding tab: 10e3 – 10e5 ohm
Grounding
1 meg resistor 1 x 10e6 – 10e7 ohm
Resistance: Color: White interior / black Warranty: Warranted for One Year against mechanical and electrical defects.
1-866-51-NSTAT (67828) www.nstatesd.com
TOE GROUNDER
PART NUMBER: NS-911R
SPECIFICATIONS:
Construction: Stretch adjustable elastic band for comfort.
1mm Conductive Rubber 1.6mm two layers anti-slip conductive rubber
Resistivity: Color:
Sole: 10e4 – 10e6 ohm / sq Grounding: 10e6 ohm +/- 5% Black
Warranty: Warranted for One Year against mechanical and electrical defects.
1-866-51-NSTAT (67828) www.nstatesd.com
ESD WHITE LAB COAT
PART NUMBER: NS-4600 SERIES
SPECIFICATIONS:
Material: 98% Polyester, 2% Carbon Suffused Nylon Type: Surface Resistivity:
4oz. Soil-Release resin finish woven fabric 3.3 x 10e6 Ohm Sq.
Decay Rate:
5000 volts to effective 0 volts in less than .01 seconds
Stitching: Conductive Inner Thread Weight: Wash/wear durability: Color:
152 +/- 5gsm 52 washes with very mild soap White
Sizes: Part number:
X-Small to 2X(other sizes are available on special orders) NS-4600-0010-XSW(x-small), NS-4600-0011-SMW(small), NS-4600-0012-MDW(medium), NS-4600-0013-LGW(large) NS-4600-0014-XLW(x-large) , NS-4600-0015-XXL(2X-large)
1-866-51-NSTAT (67828) www.nstatesd.com
ESD BLUE LAB COAT
PART NUMBER: NS-4700 SERIES
SPECIFICATIONS:
Material: 98% Polyester, 2% Carbon Suffused Nylon Type: Surface Resistivity:
4oz. Soil-Release resin finish woven fabric 3.3 x 10e6 Ohm Sq.
Decay Rate:
5000 volts to effective 0 volts in less than .01 seconds
Stitching: Conductive Inner Thread Weight: Wash/wear durability: Color:
152 +/- 5gsm 52 washes with very mild soap Electric Blue
Sizes: Part number:
X-Small to 2X(other sizes are available on special orders) NS-4700-0000-XSE(x-small), NS-4700-0001-SML(small), NS-4700-0002-MDE(medium), NS-4700-0003-LGE(large) NS-4700-0004-XLE(x-large) , NS-4700-0050-XXL(2X-large)
1-866-51-NSTAT (67828) www.nstatesd.com
ESD GREEN LAB COAT
PART NUMBER: NS-4800 SERIES
SPECIFICATIONS:
Material: 98% Polyester, 2% Carbon Suffused Nylon Type: Surface Resistivity:
4oz. Soil-Release resin finish woven fabric 3.3 x 10e6 Ohm Sq.
Decay Rate:
5000 volts to effective 0 volts in less than .01 seconds
Stitching: Conductive Inner Thread Weight: Wash/wear durability: Color:
152 +/- 5gsm 52 washes with very mild soap Green
Sizes: Part number:
X-Small to 2X(other sizes are available on special orders) NS-4800-0000-XSE(x-small), NS-4800-0001-SME(small), NS-4800-0002-MDE(medium), NS-4800-0003-LGE(large) NS-4800-0004-XLE(x-large) , NS-4800-0050-XXL(2X-large)
1-866-51-NSTAT (67828) www.nstatesd.com
ESD BLUE LAB COAT
PART NUMBER: NS-5000 SERIES
SPECIFICATIONS:
Material: 98% Polyester, 2% Carbon Suffused Nylon Type: Surface Resistivity:
Soil & Oil release finish 10e5 – 10e6
Decay Rate:
5000 volts to effective 0 volts in less than .01 seconds
Stitching: Conductive Inner Thread Weight: Wash/wear durability: Color:
115 +/- 5gsm 100 washes with very mild soap Blue
Sizes: Part number:
X-Small to 2X(other sizes are available on special orders) NS-5000-0000-XSE(x-small), NS-5000-0001-SME(small), NS-5000-0002-MDE(medium), NS-5000-0003-LGE(large) NS-5000-0004-XLE(x-large) , NS-5000-0050-XXL(2X-large)
1-866-51-NSTAT (67828) www.nstatesd.com
CONDUCTIVE BLUE TABLE MATTING
PART NUMBER: NS-500 SERIES
SPECIFICATIONS:
Construction: Dual Layer Rubber Material Thickness: Hardness:
2mm , +/- 0.1mm Top Layer 65 , Bottom Layer 66
Tensile Strength: Top Layer 114 kg/. Bottom Layer 112 kg/. Elongation: Top Layer 370% , Bottom Layer 380% Surface Resistivity
Top Layer 10e7 – 10e8 , Bottom Layer 10e4 – 10e5
Static Decay: Resistance to Ground:
5KV – 0KV - less than 0.1 seconds Less than 10e8
Roll Length: 10 meters Roll Width: 24” , 30”, 36” , 48”
Part numbers: NS-50024 ( 24”x 10meters) ,NS-50030 ( 30” x 10meters ),NS-50036 ( 36” x 10meters ),NS-50048 ( 48” x 10meters)
***We can also cut to size***
1-866-51-NSTAT (67828) www.nstatesd.com
CONDUCTIVE GREEN TABLE MATTING
PART NUMBER: NS-502 SERIES
SPECIFICATIONS:
Construction: Dual Layer Rubber Material Thickness: Hardness:
2mm , +/- 0.1mm Top Layer 65 , Bottom Layer 66
Tensile Strength: Top Layer 114 kg/. Bottom Layer 112 kg/. Elongation: Top Layer 370% , Bottom Layer 380% Surface Resistivity
Top Layer 10e7 – 10e8 , Bottom Layer 10e4 – 10e5
Static Decay: Resistance to Ground:
5KV – 0KV - less than 0.1 seconds Less than 10e8
Roll Length: 10 meters Roll Width: 24” , 48”
Part numbers: NS-50224 ( 24”x 10meters),NS-50048 ( 48” x 10meters)
***We can also cut to size***
1-866-51-NSTAT (67828) www.nstatesd.com
CONDUCTIVE GREY TABLE MATTING
PART NUMBER: NS-503 SERIES
SPECIFICATIONS:
Construction: Dual Layer Rubber Material Thickness: Hardness:
2mm , +/- 0.1mm Top Layer 65 , Bottom Layer 66
Tensile Strength: Top Layer 114 kg/. Bottom Layer 112 kg/. Elongation: Top Layer 370% , Bottom Layer 380% Surface Resistivity
Top Layer 10e7 – 10e8 , Bottom Layer 10e4 – 10e5
Static Decay: Resistance to Ground:
5KV – 0KV - less than 0.1 seconds Less than 10e8
Roll Length: 10 meters Roll Width: 24”
Part numbers: NS-50324 ( 24”x 10meters)
***We can also cut to size***
1-866-51-NSTAT (67828) www.nstatesd.com
THREE LAYER BLUE TABLE MATTING
PART NUMBER: NS-601 SERIES
SPECIFICATIONS:
Material: 3 layer advanced fusion vinyl / foam Electrical Properties:
PTP: <5.5 X 10 @ 10 Volts per EOS / ESD 4.17 10e5 – 10e6 RTG: <5.5 X 107 @ 10 Volts per EOS / ESD 4.1 Surface Resistivity: < 109 per EOS / ESD S11.11
Charge Decay
Conditioning: 50% RH +/- 2% @ 230C +/- 10C for 24 Hours Test conducted @: 50% RH +/- 2% @ 230C +/- 10C. Test results = Time, seconds to decay to 10% of initial charge Results: <2.0 seconds 5000 volts to effective 0 volts in less than .01 seconds
Physical Properties: Part number:
Thickness: 3/8"Colors: Blue NS-601-24 (24” x 50ft) , NS-601-30(30” x 50ft) , NS-601-36(36” x 50ft)
1-866-51-NSTAT (67828) www.nstatesd.com
COMMON GROUND POINT
PART NUMBER: NS-53-CPG
SPECIFICATIONS:
Feature: Designed for use at workstations, it provides a common grounding point for one or two wrist straps, as well as table mats and runners. A 3/8” (10mm) stud securely snaps to the mat, and at the other end of the 15 foot cord is a #10 ring terminal
1-866-51-NSTAT (67828) www.nstatesd.com
FLOOR MAT “UFO” GROUND
PART NUMBER: NS-2320-008-FMG
SPECIFICATIONS:
Feature: 15’ cord length
# 10 ring terminal Low profile prevents easy disconnect Easily snaps to mat for flush connection
1-866-51-NSTAT (67828) www.nstatesd.com
STATIC DISSIPATIVE SEAMLESS GLOVES
NS-NGA220 SERIES NS-NGA221 SERIES
PALM COATED TIP COATED
SPECIFICATIONS:
Construction: Seamless knitted with continuous nylon yarn Features:
Provides non slip and eliminates finger print contamination Pu foam coating provides a super grip and abrasion resistance
Protects from possible damage of product from chloride of sweat Helps protect the product from harmful static electricity Superior grip and offers excellent ventilation Part numbers:
Surface Resistivity: 10e6 – 10e7 NS-NGA220-SML (small ), NS-NGA220-MED(medium), NS-NGA220-LG(large), NS-NGA220-XL(x-large) NS-NGA220-2XL(2x-large) NS-NGA221-SML (small), NS-NGA221-MED(medium), NS-NGA221-LG(large), NS-NGA221-XL(x-large) NS-NGA221-2XL(2x-large)
1-866-51-NSTAT (67828) www.nstatesd.com
ESD HIGH TEMPERATURE KAPTON TAPE
PART NUMBER: T-805-AS SERIES
SPECIFICATIONS:
Construction: Low static polyimide ( Kapton ) film Thickness: 2.5mil Substrate: Adhesive to steel:
1mil polyimide film 22 oz/in
Die electric strength
7000 volts
Operating Temp: Up to 600F Elongation at break Tensile strength
60% 32 lbs/in
Length Static charge
36yards Removal from roll less than 150V
Removal from PCB less than 50V Order Part # :
T-805-AS-1/4 (¼” x 36 yards) T-805-AS-1/-2 (½” x 36 yards) T-805-AS-3/4 (¾” x 36 yards) . Call office for more sizes.
1-866-51-NSTAT (67828) www.nstatesd.com
ESD HIGH TEMPERATURE MASKING TAPE
PART NUMBER: NS-0938-2
SPECIFICATIONS:
Construction: Crepe paper , natural rubber Thickness:
8 mil
Adhesive Backing:
Natural Rubber Crepe paper
Adhesive to steel: 31 oz/in Tensile strength
32 lbs/in
Temperature:
160 / 180 Celcius, 1 hour
Elongation: 10% Color:
Light yellow
Length: 36 yards Order part # NS-0938-2-1/2 (½” x 36 yards) NS-0938-2-3/4 (3/4” x yards)
1-866-51-NSTAT (67828) www.nstatesd.com
ESD FLOOR TAPE
PART NUMBER: NS-2435FL
SPECIFICATIONS:
Construction: Scuff resistant vinyl plastic combined with quick-stick adhesive Width:
3 inch
Length: Appearance:
54 feet Bright yellow vinyl, large black letters
1-866-51-NSTAT (67828) www.nstatesd.com
ESD GRID TAPE
PART NUMBER: NS-221 SERIES
SPECIFICATIONS:
Construction: Conductive shielding tape Thickness:
Anti Static adhesive copolymer layer 1 x 10e9 Conductive grid layer 10e4 – 10e5 Anti Static copolymer layer 8x10e12 49 microns
Charge Decay: Peel Adhesion:
0.001 sec. 0.45kg / 15mm minimum
Temp. resistance 60C / 140F maximum Core Size: 3 inch Length
36meters
Order Part # : NS-221-1/4 ( ¼”x 36meters) NS-221-1/2 (1/2 x 36meters ) NS-221-3/4 ( ¾” x 36meters ) NS-221-1 (1”x 36meters)
1-866-51-NSTAT (67828) www.nstatesd.com
ESD STATIC AWARENESS LABELS
PART NUMBER: NS-06722
SPECIFICATIONS:
Construction: Yellow tint paper label Adhesive: Dimension:
Low tack adhesive 2.00” x 2.00”
Qty per roll: 1000
1-866-51-NSTAT (67828) www.nstatesd.com
ESD STATIC CAUTION LABELS
PART NUMBER: NS-7722
SPECIFICATIONS:
Construction: Yellow tint destructible tamper evident paper label Adhesive: Dimension:
Low tack adhesive 2.00” x 2.00”
Qty per roll: 1000
1-866-51-NSTAT (67828) www.nstatesd.com
METAL-IN STATIC SHIELDING BAG
SPECIFICATIONS:
Electrical Properties:
Surface Resistivity Interior: <10e12 ohms/sq using ASTM D257 Exterior:<10e12 ohms/sq using ASTM D257
Metal: 100 ohms Static Shielding < 30volts MIL-PRF-81705,EIA 541 Static Shielding < 10nj EOS/ESD S11.31 Static Decay < 0.05 sec MIL-PRF-81705, FTMS 101 MTH 4046
Physical Properties:
Tensile strength >25lbs ASTM D 882 Seam Strength Pass MIL-PRF-81705
Light Transmission 40% TOBIAS Part numbers:
Temperature range: 250F – 375F , 0.5-3.5 seconds Pressure 30 – 70 PSI Thickness 3.1mil Please call office of a full range of sizes
1-866-51-NSTAT (67828) www.nstatesd.com
METAL-OUT STATIC SHIELDING BAG
SPECIFICATIONS:
Electrical Properties:
Surface Resistivity Interior: >10e5 < 10e12 ohms/sq using ASTM D257 Exterior:<10e5 ohms/sq using ASTM D257
Metal: 100ohms Static Shielding < 30volts MIL-PRF-81705,EIA 541 Static Shielding < 10nj EOS/ESD S11.31 Static Decay < 0.05 sec MIL-PRF-81705, FTMS 101 MTH 4046 Charge Retention <100 volts
Physical Properties:
Tensile strength >20lbs ASTM D 882 Seam Strength Pass MIL-PRF-81705
Light Transmission 40% TOBIAS Part numbers:
Temperature range: 250F – 375F , 0.5-3.5 seconds Pressure 30 – 70 PSI Thickness 3.1mil Please call office of a full range of sizes
1-866-51-NSTAT (67828) www.nstatesd.com
PINK BAG
SPECIFICATIONS:
Features: Pink Color identifies as pink poly Low charging ( antistatic ) and dissipative Excellent for applications requiring a tougher bag Surface Resistance: < 10e11 ohms Thickness: 2mil and 4 mil Open and Zip lock
Part numbers:
Please call office of a full range of sizes
1-866-51-NSTAT (67828) www.nstatesd.com
ESD PAPER
SPECIFICATIONS:
Typical Test Data
Physical:
Base Weight (3000 sq. ft) 20# 40# Caliper (mils) 3.7 – 3.9 6.7 – 6.9
Tear MD/CD 30 / 32 30 / 32 Tensile MD/CD 22 / 14 22 / 14 Sheffield smoothness FS / WS 50 / 50 50 / 50 Brightness (%) 91 91 Opacity (%) 92 92
Resistivity (@ 50% RH) 5 x 10e7 5 x 10e7 Resistivity (@ 20% RH) 6 x 10e9 6 x 10e9 Typical Test Data
Chemical: Standard Sizes:
PH (acid level) 7.02 (neutral) Chloride (CI) < 100ppm Nitrate (NO3) < 10ppm Amine(NH2 – R) < 55ppm Sodium(Na) < 85ppm Sulfate(SO4) < 100ppm 8 ½ x 11 11 x 17 A4 metric Can be supplied blank or pre-printed