DSE7110/20AUTO START & AUTO MAINS FAILURECONTROL MODULES
DSEGenset
®
The DSE7110 is an Auto StartControl Module and the DSE7120 isan Auto Mains (Utility) Failure ControlModule suitable for a wide variety ofsingle, diesel or gas, gen-setapplications.
Monitoring speed, frequency,voltage, current, oil pressure, coolanttemperature and fuel level, themodules will display warnings,shutdown and engine statusinformation on the back-lit LCDscreen and illuminated LEDs.
Both modules offer electronic (CAN)and non-electronic (magnetic pick-up/alternator sensing) engineversions and offer an extensivenumber of flexible inputs, outputsand advanced engine protections sothe system can be easily adapted tosuit a wide range of applicationdemands.
Enhanced features include a 4-lineicon display.
The modules can be easilyconfigured using the DSEConfiguration Suite PC software.Front panel editing is also available.
FEATURES
ENVIRONMENTAL TESTING STANDARDS
ELECTRO-MAGNETIC COMPATIBILITYBS EN 61000-6-2EMC Generic Immunity Standard for the Industrial EnvironmentBS EN 61000-6-4EMC Generic Emission Standard for the Industrial Environment
ELECTRICAL SAFETYBS EN 60950Safety of Information Technology Equipment, including Electrical Business Equipment
TEMPERATUREBS EN 60068-2-1Ab/Ae Cold Test -30 oCBS EN 60068-2-2Bb/Be Dry Heat +70 oC
VIBRATIONBS EN 60068-2-6Ten sweeps in each of three major axes5 Hz to 8 Hz @ +/-7.5 mm, 8 Hz to 500 Hz @ 2 gn
HUMIDITYBS EN 60068-2-30Db Damp Heat Cyclic 20/55 oC@ 95% RH 48 HoursBS EN 60068-2-78Cab Damp Heat Static 40 oC@ 93% RH 48 Hours
SHOCKBS EN 60068-2-27Three shocks in each of three major axes15 gn in 11 mS
DEGREES OF PROTECTIONPROVIDED BY ENCLOSURESBS EN 60529IP65 - Front of module when installed into thecontrol panel with the supplied sealing gasket.
1ph2ph3phN
1ph2ph3ph
1ph2ph3phN
4 4
PC
VOLTS
3
+
DEUTZISUZUPERKINSCATERPILLARMTUVOLVOCUMMINSSCANIA
D +W/L
GENERATOR SENSING
VOLTSCURRENT
USBPORT
CONFIGURABLEINPUTS
DC OUTPUTS ANALOGUESENDERS
EMERGENCY STOP
DC POWER SUPPLY 8-35V
ELECTRONICENGINES ORMAGNETIC PICK-UP
FUEL & CRANKOUTPUTS(Flexible with CAN)
CHARGEALTERNATOR
MAINS (UTILITY) SENSINGDSE7120 ONLY
ISSUE 2
+
1 1
N/C VOLT FREEOUTPUT
N/O VOLT FREEOUTPUT
COMPREHENSIVE FEATURE LIST TO SUIT A WIDE VARIETYOF GEN-SET APPLICATIONS
7
OTHER
DSE7110/20
KEY FEATURES• Back-lit icon LCD display• Five key menu navigation• Front panel editing• LED and LCD alarm indication• Power Save mode• 4 Digital inputs• 3 Analogue inputs (2 fixed, 1flexible)
• 6 configurable outputs• Configurable timers and alarms• Alternative configuration• Event Log (5)• CAN and Magnetic Pick up / Alt.sensing
• 3 Phase generator monitoring• Current monitoring andprotection
• 3 Phase Mains (Utility) monitoring(DSE7120 only)
• Test button (DSE7120 only)
• Automatic load transfer(DSE7120 only)
• Battery voltage monitoring• Engine pre-heat• Hours counter• Comprehensive shutdown orwarning on fault condition
• Fully configurable via DSEConfiguration Suite PC software
• USB connectivity• Remote SCADA monitoring viaDSE Configuration Suite PCsoftware
KEY BENEFITS• Automatically transfers betweenmains (utility) and generatorpower (DSE7120 only)
• Hours counter provides accurateinformation for monitoring andmaintenance periods
• User-friendly set-up and buttonlayout
• Multiple engine parameters aremonitored simultaneously
• Module can be configured to suitindividual applications
• Compatible with a wide range ofCAN engines
• Uses DSE Configuration Suite PCsoftware for simplifiedconfiguration
• IP65 rating (with supplied gasket)offers increased resistance towater ingress
• Licence-free software
DSE7110/20AUTO START & AUTO MAINS FAILURECONTROL MODULES
®
DSEGenset
DSE7110
DSE7120
FEATURES
SPECIFICATION
DC SUPPLYCONTINUOUS VOLTAGE RATING8 V to 35 V Continuous
CRANKING DROPOUTSAble to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V. This is achieved without the need for internal batteries.LEDs and backlight will not be maintained during cranking.
MAXIMUM OPERATING CURRENT290 mA at 12 V, 140 mA at 24 V
MAXIMUM STANDBY CURRENT75 mA at 12 V, 40 mA at 24 V
CHARGE FAIL/EXCITATION RANGE0 V to 35 V
MAINS (UTILITY) DSE7120 ONLYVOLTAGE RANGE15 V to 333 V AC (L-N)
FREQUENCY RANGE3.5 Hz to 75 Hz
OUTPUTSOUTPUT A (FUEL)15 A DC at supply voltage
OUTPUT B (START)15 A DC at supply voltage
OUTPUTS C & D8 A AC at 250 V AC (Volt free)
AUXILIARY OUTPUTS E, F, G & H2 A DC at supply voltage
GENERATORVOLTAGE RANGE 15 V to 333 V AC (L-N)
FREQUENCY RANGE3.5 Hz to 75 Hz
MAGNETIC PICK UPVOLTAGE RANGE+/- 0.5 V to 70 V
FREQUENCY RANGE10,000 Hz (max)
DIMENSIONSOVERALL240 mm x 181 mm x 42 mm 9.4” x 7.1” x 1.6”
PANEL CUT-OUT220 mm x 160 mm8.7” x 6.3”
MAXIMUM PANEL THICKNESS8 mm0.3”
STORAGE TEMPERATURE RANGE-40 oC to +85 oC
OPERATING TEMPERATURE RANGE-30°C TO +70°C
DEEP SEA ELECTRONICS PLC UKHighfield House, Hunmanby Industrial Estate, Hunmanby YO14 0PHTELEPHONE +44 (0) 1723 890099 FACSIMILE +44 (0) 1723 893303EMAIL [email protected] WEBSITE www.deepseaplc.com
DEEP SEA ELECTRONICS INC USA3230 Williams Avenue, Rockford, IL 61101-2668 USATELEPHONE +1 (815) 316 8706 FACSIMILE +1 (815) 316 8708EMAIL [email protected] WEBSITE www.deepseausa.com
RELATED MATERIALSTITLE PART NO’SDSE7110 Installation Instructions 053-080DSE7120 Installation Instructions 053-081DSE7100 Operator Manual 057-113DSE7100 Configuration Suite PC Manual 057-117
055-081/10/11 (4) USRegistered in England & Wales No.01319649VAT No.316923457
Deep Sea Electronics Plc maintains a policy of continuous development and reserves the right to changethe details shown on this data sheet without prior notice. The contents are intended for guidance only.