FRONT I/O
FANS & R ADIATORS CLEAR ANCES
PRODUCT OVERVIEW
ECLIPSE series
REAR
FRONT
TOP
120FAN
140FAN
140FAN
120FAN
120FAN
140RAD
120RAD
120RAD
120RAD
CLEARANCE
CPU Cooler Height 160mmPSU Clearance 250mmGPU Clearance 400mmE-ATX Motherboard 280mm
140280
120
240
120
240
120
Max 122x315mm
*max motherboard compo-nent height is 38mm
Max 142x315mm
Installation guide for:
Eclipse P360 modelsEclipse P418 models
22x Motherboard+ SSD Screw
1x Motherboard- Standoff
FRONT FILTER
TOP FILTER
PSU FILTER
2x Thumb Screw
4x PSU Screw
12x Fan Screw
1x This Manual
6x Zip Tie
2x 120 mm D-RGB Case fan
2x 2.5” SSD Bracket(Pre-Installed)
INTRODUCTION INCLUDED ACCESSORIES
INSTALLATION GUIDE V1.0
Thank you for choosing Phanteks. Please take a moment to carefully go through the manual. Phanteks will not take responsibility for any damages incurred due to incorrect installation or usage of this product.
1. Power Button
4. USB 3.0
2. Headphone
6. D-RGB Mode
5. D-RGB Color
3. Microphone
English
1. Power Button2. Headphone3. Microphone4. USB 3.05. D-RGB Color6. D-RGB Mode
Francais
1. Bouton d’alimentation2. Casque3. Microphone4. USB 3.05. D-RGB Couleur6. D-RGB Mode
Deutch
1. Ein-/Austaste2. Kopfhörer3. Mikrofon4. USB 3.05. D-RGB Farbe6. D-RGB Modus
Espanol
1. Botón de encendido2. Auricular3. Micrófono4. USB 3.05. D-RGB Color6. D-RGB mode
For PH-EC360A_DBK model, other models may vary
PANEL REMOVAL
1. 1.
1.
2.
2.
1. 1.
1.
2.
2.
LO O S E N T H U M B S C R E W S A N D
S L I D E PA N E L T O T H E R E A R
R E M O V E F R O N T PA N E L B Y P U L L I N G O N
T H E PA N E L F R O M B E LO W
LO O S E N T H U M B S C R E W S
S L I D E S I D E PA N E L O F F
R E M O V E T E M P E R E D G L A S S PA N E L
There are three panels which can be removed from the P360A Chassis; the left side tempered glass panel, the right side panel and the front panel. Follow these steps below.
2 xLOOSEN:
LEFT SIDE PANEL
FRONT PANEL
RIGHT SIDE PANEL
2 xLOOSEN:
ECLIPSE series
9 x
4 x
4 x
The HDD Tray can
also hold a 2.5” SSD.
HARDWARE INSTALLATION
MOTHERBOARD
POWER SUPPLY
2.5” SSD
3.5” HDD
123
1.
1.
1.
2.
I N S TA L L T H E M O T H E R B O A R D U S I N G T H E M O T H E R B O A R D S C R E W S .
I N S TA L L T H E P O W E R S U P P LY W I T H 4 X P S U S C R E W S .
I N S TA L L T H E S S D W I T H 4 X S S D S C R E W S A N D P L A C E I T O N T H E 4 X R U B B E R G R O M M E T S .
I N S TA L L T H E H D D I N T H E B R A C K E T A N D P L A C E I T I N T H E C H A S S I S .
21
ECLIPSE series
ECLIPSE seriesCABLE CONNECTION
With the Integrated Digital-RGB controller, you can choose from a variety of modes and color options.
The P360 / P418 Chassis supports the Phanteks Vertical GPU bracket. It can be easily installed in the PCI slot area. Follow the instructions that are included with the Vertical GPU bracket.
Power SW
HD AUDIO
USB 3.0
SATA
DIGITAL-RGB CONTROL
OPTIONAL UPGRADES
CONNEC T TO DIGITAL-RGB PRODUC TS
VERTIC AL UPGR ADE (PH-VGPUK T_02)
CONNEC T TO MOTHERBOARD
CONNEC T TO POWER SUPPLY
TO DIGITAL-RGB PRODUC TS
TO DIGITAL-RGB MOTHERBOARD
COMPATIBLE WITH:
Connect to compatible motherboard for
software control. See the below section:
Digital-RGB Control.
COLORS
2 SEC
MODES
SOLID
BREATHING
R ADAR
SPARKLE
R AINBOW
PRESS AND HOLD THE MODE BUT TON TO TURN OFF FRONT LEDSPRESS AND HOLD THE MODE BUT TON AGAIN TO TURN OFF ALL LEDS
SOFTWARE CONTROL: Turning off all LED’s will allow
for software control with a compatible motherboard.
The Mode & Color buttons do not function when
using Software Control.
MAXIMUM POWER: The Digital-RGB controller can
provide a maximum of 7A of power for expansion.
D-RGB Mode
D-RGB Color
Recommended
