REFERENCES
_____
311
Background to buckling
Steel columns under partial fire exposure – An introductory study
Numerical and analytical studies of joint component behaviour in fire, Proceedings of Third International Workshop "Structures in Fire"
The development of a component-based connection element for end-plate connections in fire
Structural design for fire safety
A tool to design steel elements submitted to compartment fires – OZone V2. Part 1: pre- and post-flashover compartment fire model
A tool to design steel elements submitted to compartment fires – Ozone V2. Part 2: Methodology and application
Calcul Simplifié de la Temperature Critique Selon la Norme XP ENV 1993-1-2
An Introduction to Fire Dynamics
European Recommendations for the Fire Safety of Steel Structures. European Convention for Constructional Steelwork.
Fire Resistance of Steel Structures Fire Safety of Steel Structures European Convention for Constructional Steelwork.
Fire Design of Steel Structures Jean-Marc Franssen and Paulo Vila Real© 2012 ECCS – European Convention for Constructional Steelwork. Published 2012 by ECCS – European Convention for Constructional Steelwork
REFERENCES
_____
312
Model Code on Fire Engineering
Rules for Member Stability in EN 1993-1-1: Background documentation and Design Guidelines. European Convention for Constructional Steelwork.
). Eurocode: Basis of Structural
Design, Eurocode 1: Actions on
structures - Part 1-1: General actions - Densities, self-weight, imposed loads for buildings
Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures exposed to fire
Eurocode 1 - Actions on structures – Part 1–3: General actions – Snow loads.
. Eurocode 1: Actions on structures – Part 1–4: General actions – Wind actions.
. Eurocode 3: Design of steel Structures. Part 1.1: General Rules and Rules for Buildings
. Eurocode 3: Design of steel Structures. Part 1.2: Structural fire design
Eurocode 3: Design of steel Structures. Part 1.4: Supplementary Rules for Stainless Steels
Eurocode 3: Design of steel Structures. Part 1.5: Eurocode 3 - Design of steel structures - Part 1-5: Plated structural elements
Eurocode 3: Design of steel structures – Part 1–8: Design of Joints.
REFERENCES
_____
313
Eurocode 4: Design of composite steel and concrete structures – Part 1–1: General rules and rules for buildings.
Eurocode 4: Design of composite steel and concrete structures- Part 1-2: General rules - Structural fire design
. Fire resistance tests. Part 2 – Alternative and additional procedures.
. Hot rolled products of structural steels – Part 2: Technical delivery conditions for non–alloy structural steels.
Hot finished structural hollow sections of non-alloy and fine grain steels. Part 1: Technical delivery requirements.
Hot finished structural hollow sections of non-alloy and fine grain steels. Part 2: Tolerances, dimensions and sectional properties.
Cold formed welded structural hollow sections of non-alloy and fine grain steels. Part 1: Technical delivery requirements.
Cold formed welded structural hollow sections of non-alloy and fine grain steels. Part 2: Tolerances, dimensions and sectional properties.
Fire classification of construction products and building elements. Part 2: Classification using data from fire resistance tests, excluding ventilation services.
Test methods for determining the contribution to the fire resistance of structural members. Part 1. Horizontal protective membranes.
REFERENCES
_____
314
Test methods for determining the contribution to the fire resistance of structural members. Part 2. Vertical protective membranes.
Eurocode 3: Design of steel Structures – Part 1–1: General Rules and Rules for Buildings
Eurocode 3, Design of Steel Structures – Part 1–2: General rules – Structural fire design
Guidance paper L (concerning the Construction Products Directive - 89/106/EEC) - Application and use of Eurocodes
Design Manual for Structural Stainless Steel,
A simple model for fire resistance of axially-loaded members according to Eurocode 3
Numerical determination of 3D temperature fields in steel joints
SAFIR: A Thermal/Structural Program Modeling Structures under Fire,
. Calculation of temperature in fire-exposed bare steel structures: Comparision between ENV 1993-1-2 and EN 1993-1-2.
Designing steel structures for fire safety,
Déversement Élastique d’une poutre à Section Bi-symétrique soumise à des Moments d’extrémité et une charge répartie ou concentrée
Construction métallique, notions fondamentales et methods de dimensionnement
REFERENCES
_____
315
Modelling Membrane Action of Concrete Slabs in Composite Buildings in Fire. Part I: Theoretical Development
ISO 834. Fire-Resistance Tests - Elements of Building Construction
Demonstration of real fire tests in car parks and high buildings
Steel beam-columns
subjected to fireNew
Proposals for the Design of Steel Beam-Columns under Fire Conditions, Including a New Approach for the Lateral-Torsional Buckling of Beams
Duplex stainless steel columns and beam-columns in case of fire
Behaviour of stainless steel structures in case of fire
Buckling of stainless steel columns and beams in fire
StructuresThe Plastic Methods of Structural Analysis
An Updated International Survey of Computer Models for Fire and Smoke
Test method for determining the contribution to the fire resistance of structural members Part 4: Applied protection to steel members
REFERENCES
_____
316
Fire safety Engineering - Design of structures
Structural steelwork – Analysis and design
Experimental investigation of the behaviour of a steel sub-frame under a natural fire
Effect of Joint Typologies on the 3D Behaviour of a Steel Frame under a Natural Fire
Recommendations for the design of end-plate beam-to-column steel joints subjected to a natural fire
Numerical study of a steel sub-frame in fire
Finite element modelling on fin plate steel connections in fire
Steel Designer’s Manual
A component model for the behaviour of steel joint at high temperatures
Behaviour of steel joints and fire loading
An integrated adaptive environment for fire and explosion analysis of steel frames – Part I: Analytical models
Experimental and analytical studies of steel joint components at high temperature
Experimental and analytical investigation of the ‘compression zone’ components within a steel
REFERENCES
_____
317
joint at high temperature
Experimental and analytical investigation of the ‘tension zone’ components within a steel joint at high temperature
Structural Steelwork Eurocodes, a trans-national approach
Stability of steel columns in case of fire: Numerical modelling,
Flexural–torsional tuckling of structures
The behaviour and design of steel structures to AS 4100
The behaviour and design of steel structures to BS5950
Characteristics of the heat transfer for calculating the temperature development in structural steel work exposed to standard fire condition under plate thermocouple control
A design model for stainless steel box columns in fire
Numerical Modeling of Lateral Buckling of Steel I Beams Under Fire Conditions – Comparison with Eurocode 3
Fire design of steel structures according Eurocode 3
Lateral-Torsional Buckling of Unrestrained Steel Beams Under Fire Conditions: Improvement of EC3 Proposal
REFERENCES
_____
318
Towards a consistent safety format of steel beam-columns: application of the new interaction formulae at ambient temperature to elevated temperature
Parametric analysis of the Lateral-torsional buckling resistance of Steel beams in case of fire
Lateral–torsional buckling of Stainless steel I–beams in case of fire
Tables for section factors of unprotected and protected steel profiles
Tables for cross-sectional classification under normal and fire temperature
Experimental Behaviour of Steel Joints under Natural Fire
Steel and Composite Structures - Behaviour and design for fire safety
Heat Transfer Analysis of Insulated Steel Members Exposed to Fire
Plastic Analysis and Design of Steel Structures