GEA commercial compressors
Product overview
engineering for a better world GEA Refrigeration Technologies
2 | www.gea.com
Die GEA Group Aktiengesellschaft ist einer der größ-ten Systemanbieter für die nahrungsmittelverarbei-tende Industrie sowie für ein breites Spektrum von Prozessindustrien.
GEA Refrigeration Technologies bietet als Teil der GEA Group, passende Verdichter für alle Bereiche der Gewerbe-, Industrie- und Transportkälte sowie für die Bahn- und Busklimatisierung.
Dass GEA an Verdichter höchste Ansprüche an En-ergieeffizienz stellt, belegt unser EFC (Elec tronic Fre-quency Control) System. Mit ihm bieten wir bereits seit Jahren eine Lösung zur Senkung des Energiever-brauchs um rund 25 %.
Lassen Sie sich begeistern. Von unseren neuen Pro-dukten, unseren bewährten Baureihen und der gan-zen Leidenschaft, die wir in jedes unserer Produkte stecken.
GEA HubkolbenverdichterGEA piston compressors
GEA compressors – best choice for sustainable security
GEA Group Aktiengesellschaft is one of the largest suppliers for the food processing industry and for a wide range of other process industries.
As part of the GEA Group, GEA Refrigeration Tech-nologies offers the right compressors for all fields of commercial-, industrial- and transport refrigeration as well as rail and bus air-conditioning.
GEA provides the highest standards of energy effici-ency for compressors, which is proven by our EFC (Electronic Frequency Control) system. With this system we have been offering a solution to reduce energy consumption by 25 % for many years.
Be inspired. By our new products, our established product series and the entire passion that goes into each of our products.
GEA Verdichter – die beste Wahl für nachhaltige Sicherheit
Produktionsprogramm GEA VerdichterProduction program GEA compressors
3www.gea.com | 3www.gea.com |
ab Seite 4from page 4
ab Seite 16from page 16
ab Seite 20from page 20
Halbhermetische Verdichter HG (HA)Mit den halbhermetischen Verdichtern der Modellreihe HG (Hermetic Gas-cooled) bietet GEA Bock eine klassische, sauggasgekühlte Verdichtertechnologie nach neue-stem Stand der Technik. Laufruhe, Servicefreundlichkeit, Effizienz und Zuverlässig-keit auf höchstem Qualitätsniveau zeichnen diese Verdichter aus. Selbstverständlich geeignet für konventionelle oder chlorfreie HFKW-Kältemittel.Für den Tiefkühlbereich, insbesondere mit den Kältemitteln R404A, R407F und R22 steht die Modellreihe HA (Hermetic Air-cooled), eine spezielle GEA Bock-Konstruk-tion, zur Verfügung.
Semi-hermetic compressors HG (HA)The GEA Bock HG (Hermetic Gas-cooled) range of semi-hermetic compressors offers traditional suction gas-cooled compressor state of the art technology. These compres-sors of the highest quality standard excel in their running comfort, easy mainte-nance, efficiency and reliability. Suitable as standard for conventional or chlorine-free HFC refrigerants.The HA (Hermetic Air-cooled) range, specially engineered by GEA Bock, is availab-le for deep-freezing applications, in particular for use with the refrigerants R404A, R407F and R22.
Offene Verdichter F Mit der Modellreihe F stehen Ihnen moderne offene GEA Bock 2-, 4-, 6- und 8-Zylin-der Verdichter für Fremdantrieb (über Keilriemen oder Kupplung) zur Verfügung. Es sind nahezu alle antriebsbedingten Anforderungen möglich.
Open type compressors F The F model series provides modern open type 2-, 4-, 6- and 8-cylinder compressors for separate drive systems (using V belts or direct couplings). Virtually all drive capa-city requirements can be met.
Fahrzeugverdichter FKGEA Bock Fahrzeugverdichter der Baureihe FK sind das Ergebnis jahrzehntelanger Erfahrung im Bereich mobiler Kühlung und Klimatisierung. Unübertroffen leicht, kompakt, robust und ein großes Drehzahlband sind nur eini-ge der herausragenden Merkmale dieser einzigartigen Produktpalette mit 2-, 4- und 6-Zylinder-Verdichtern. Zugeschnitten auf den individuellen Anwendungsfall sind die unterschiedlichsten Ausführungsvarianten möglich.
Vehicle compressors FKGEA Bock vehicle compressors of the FK range are the result of many years of expe-rience in the domain of mobile cooling systems and air-conditioning. The unsurpassed light, compact, robust design and wide r.p.m. range are only some of the outstanding features of this unique product range of 2-, 4- and 6-cylinder compressors. A wide variety of designs can be tailored to suit individual requirements.
4 | www.gea.com
5www.gea.com |
Halbhermetische VerdichterSemi-hermetic compressors
Auf einen Blick 6At a glance
Besondere Merkmale 7Special features
Verdichter für natürliche Kältemittel 10Compressors for natural refrigerants
ATEX Verdichter 14ATEX compressors
Verflüssigungssätze 16Condensing units
6 | www.gea.com
Halbhermetische VerdichterSemi-hermetic compressors
Halbhermetische Verdichter
Semi-hermetic compressors
ATEX Verdichter
ATEX compressors
Verdichter für natürliche Kältemittel
Compressors for natural refrigerants
HG Verdichter (sauggasgekühlt)
HG compressors (gas-cooled)
HA Verdichter (luftgekühlt)
HA compressors (air-cooled)
CO2 Verdichter transkritisch
CO2 compressors transcritical
CO2 Verdichter subkritisch
CO2 compressors subcritical
HC Verdichter für Kohlenwasserstoffe
HC compressors for hydrocarbons
SHG PlusboxSHG Plusbox
SHG Verflüssigungssätze
SHG condensing units
SHA Verflüssigungssätze
SHA condensing units
SHG Verdichtersätze mit Sammler
SHG compressor units with receiver
SHA Verdichtersätze mit Sammler
SHA compressor units with receiver
SHG Plusbox
SHG Plusbox
EislaufhallenIce rinks
Maritime AnwendungenMaritime applications
BusklimatisierungBus air-conditioning
BahnklimatisierungRail air-conditioning
Gebäudeklimatisierung
Building air-conditioningGewerbekälte
Commercial refrigerationSupermarktkühlung
Supermarket refrigerationObstkühlungFruit cooling
ATEX Verdichter für Zone 1
ATEX compressors for zone 1
ATEX Verdichter für Zone 2
ATEX compressors for zone 2
7www.gea.com |
The best arguments for semi-hermetic GEA compressors
The GEA HG (Hermetic Gas-cooled) range of semi-hermetic compressors offers traditional suction gas-cooled compres-sor state of the art technology. These compressors of the highest quality standard excel in their running comfort, easy maintenance, efficiency and reliability. Suitable as standard for conventional or chlorine-free HFC refrigerants.The HA (Hermetic Air-cooled) range, specially enginee-red by GEA, is available for deep-freezing applications, in particular for use with the refrigerants R404A, R407F and R22.
- Suitable for all standard refrigerants- High refrigeration capacity combined with minimum power requirement- Outstanding running comfort- Wide range of applications without additional cooling- Stable valve plate design- Replaceable motors- Economic capacity control- Minumum space requirement- Quiet and low vibration- Oil pump lubrication independent of direction of rotation
Die besten Argumente für halb-hermetische GEA Verdichter
Mit den halbhermetischen Verdichtern der Modellreihe HG (Hermetic Gas-cooled) bietet GEA eine klassische, sauggasgekühlte Verdichtertechnologie nach neuestem Stand der Technik. Laufruhe, Servicefreundlichkeit, Effi-zienz und Zuverlässigkeit auf höchstem Qualitätsniveau zeichnen diese Verdichter aus. Selbstverständlich geeig-net für konventionelle oder chlorfreie HFKW-Kältemittel.Für den Tiefkühlbereich, insbesondere mit den Kältemit-teln R404A, R407A und R22 steht die Modellreihe HA (Hermetic Air-cooled), eine spezielle GEA-Konstruktion, zur Verfügung.
- Für alle gängigen Kältemittel geeignet- Hohe Kälteleistung bei minimalem Energiebedarf- Herrvorragender Laufkomfort- Großer Anwendungsbereich ohne jegliche Zusatzkühlung- Stabile Ventilplatten-Konstruktion- Auswechselbare Motoren- Wirtschaftliche Leistungsregulierung- Minimaler Platzbedarf- Leises und schwingungsarmes Betriebsverhalten- Drehrichtungsunabhängige Ölpumpe
Halbhermetische VerdichterSemi-hermetic compressors
The current program:8 model sizes with 27 capacity stages from 5.4 to 281.3 m³/h (50 Hz)
300
200
100
3D
isp
lace
men
t m
/h
HG88eHG76eHG6HG34eHG22eHG12P HG44e HG56e
5.4m³/h
6.7m³/h
8.0m³/h
9.4m³/h
11.1m³/h
13.7m³/h
16.5m³/h
22.1m³/h
33.1m³/h
183.6m³/h
18.8m³/h
217.2m³/h
27.3m³/h
41.3m³/h
49.2m³/h
57.7m³/h
73.8m³/h
100.4m³/h
67.0m³/h
86.6m³/h
93.7m³/h
107.6m³/h
122.4m³/h
161.4m³/h
281.3m³/h
140.6m³/h
237.9m³/h
Das aktuelle Sortiment:8 Modellgrößen mit 27 Hubraumstufen von 5,4 bis 281,3 m³/h (50 Hz)
NEU!
NEW!
NEU!
NEW!
8 | www.gea.com
Der neue HG44eThe new HG44e
Der neue HG88eThe new HG88e
Verbessertes VentilplattensystemOptimized valveplate system
Marktübliche Befestigungspositionen
Standard footprints
Hocheffiziente Elektromotoren der
neuesten GenerationHigh efficiency
motors of newestgeneration
Marktübliche Position des AbsperrventilsStandard positiondischarge valve
Neu designtes Gehäuse mit optimierter GasströmungNew design housing formaximum flow
Marktübliche Position des Absperrventils
Standard positionsuction valve
Austauschbare Motoren
Exchangeable motor
Bewährte und zuverlässige ÖlpumpenschmierungApproved and reliable oil pump lubrication
Marktübliche Position des SchauglasesStandard positionsight glass
HG56e: Abbildung ähnlichHG56e: Image similar
Neues Ventilplattensystem mit DoppelringlamellenNew valve plate system with double ring fins
Flexible AnschlussmöglichkeitenFlexible application range
Öldifferenzdrucksensor zur Öldifferenzdrucküber- wachung (optional)Oil pressure differential sensor for oil pressure differential monitoring (optional)
Überfüllungsschutz des ÖlstandsPrevention against oil overfilling
Ölsumpfheizung (optional)Oil sump heater (optional)
Ölserviceventil (optional)Oil service valve (optional)
Hochfester Sphäroguss für maximalste Betriebsdrücke
High-strength spheroidal cast iron housing for maximum operating pressures
Wärmeschutzthermostat zur Heißgasüberwachung (optional)Thermal protection thermostat for
hot gas monitoring (optional)
Flexible AnschlussmöglichkeitenFlexible application range
Motortemperatur Überwachung Auslösegerät Kriwan INT69 G (Lieferumfang) Fernabfrage über Kriwan Diagnose Gerät
Motor temperature monitoring Trigger unit Kriwan INT69 (scope of supply)
Remote access by Kriwan Diagnosis unit
Beruhigtes Ölniveau für genaues und sicheres Ablesen
Calmed oil level for precise and safe indication
HG76e: Abbildung ähnlichHG76e: Image similar
Halbhermetische VerdichterSemi-hermetic compressors
9www.gea.com |
mexxFlow valve plate for HG76e and HG88e
More refrigerating capacity and lower power consumption – this is the motto of the new mexxFlow valve plate, which forms the heart of the new GEA compressor generations.
Concerning the increase in energy efficiency of semi- hermetic reciprocating compressors, one focus of compres-sor manufacturers has always been the valve plate system. It is necessary to release the energy, which is applied by an electric motor, efficiently to the refrigerating circuit. GEA has also put its focus of continuous development on reciprocating compressors on the valve plate system – the mexxFlow valve plate is the result of our continious pro-gress.
GEA was successful in increasing the efficiency of its compressors by around 20 %. This success was achieved through a flow-optimized double ring fin construction of the valve plate in combination with a cylinder head, which is specially adapted to the valve plate. Thus, open as well as semi-hermetic GEA Bock compressors achieve records in terms of efficiency.
- Valve plate with highly efficient double ring fins- Fins made out of high-quality, impact-resistant spring steel- Flow optimized system of valve plate and cylinder head
mexxFlow Ventilplatte für HG76e und HG88e
Mehr Kälteleistung bei gleichzeitig geringerer Leistungs-aufnahme – so lautet die Formel der mexxFlow Ventilplat-te, die das Herzstück der neuen GEA Verdichtergeneratio-nen darstellt.
Wenn es darum geht, die Energieeffizienz von halbherme-tischen Hubkolbenverdichtern zu steigern, liegt seit jeher ein Fokus der Verdichterhersteller auf dem Ventilsystem. Gilt es doch hier die mittels Elektromotor aufgebrachte En-ergie möglichst effizient an den Kältekreislauf abzugeben. Auch GEA hat ihren Fokus der permanenten Weiterent-wicklung an Hubkolbenverdichtern auf das Ventilsystem gelegt – die mexxFlow Ventilplatte spiegelt das Ergebnis dieser Entwicklungsarbeit wider.
GEA ist es gelungen durch eine strömungstechnisch per-fektionierte Doppelringlamellen-Konstruktion der Ventil-platte in Kombination mit einem speziell auf die Ventil-platte zugeschnittenen Zylinderkopf die Effizienz seiner Verdichter um rund 20 % zu steigern. Damit erreichen offene sowie halbhermetische GEA Bock Verdichter Best-marken in Punkto Effizienz.
- Ventilplatte mit hoch effizienten Doppelringlamellen- Lamellen aus hochwertigem, schlagzähem Federstahl- Strömungstechnisch optimiertes System aus Ventilplatte und Zylinderkopf
mexxFlow vs. vorheriges DesignmexxFlow vs. previous design
Halbhermetische VerdichterSemi-hermetic compressors
10 | www.gea.com
Natürliche Kältemittel
Seit 2006 regelt die F-Gase-Verordnung (EG) Nr. 842/2006 den Einsatz von Fluorkohlenwasserstoffen (FKW) in kühl-technischen Systemen. Die Emissionen in die Atmosphäre müssen begrenzt werden, da FKW durch ihre wärmeab-sorbierenden Eigenschaften eine Ursache des Treibhaus-effekts und der globalen Klimaerwärmung darstellen.Mit Beginn des Jahres 2015 gilt die neue F-Gase-Verord-nung EU 517/2014. Planer, Anlagenbauer, Installateure und Betreiber müssen sich dabei umstellen: Stärker denn je sind ihre Wahlmöglichkeiten beim Einsatz von Kälte-mitteln von der neuen Regelung betroffen. Die sieht ei-ne grundlegende Abkehr von Kältemitteln mit hohem Treibhauseffekt vor. Der Ausstoß an teilhalogenierten Fluorkohlenwasserstoffen (HFKW) soll bis 2030 auf ein Fünftel der von 2009 bis 2012 angefallenen Durch-schnittsmenge sinken. Geräte für Kältemittel mit hohem Treibhauspotenzial dürfen schon in absehbarer Zeit nicht mehr in Verkehr gebracht werden, das Nachfüllen bestehender Anlagen wird Restriktionen unterworfen.
Als Partner für Kälte-, Klima- und Wärmeanwendungen berät GEA Sie gerne umfassend bei der Um stellung auf die natürlichen Kältemittel Ammoniak (NH3), Kohlen-stoffdioxid (CO2) und Kohlenwasserstoffe (HC/R290). Ein umfassendes Verdichterprogramm steht dafür zur Verfügung.
Natural refrigerants
Since 2006 the F-gas Regulation (EC) No 842/2006 has be-en governing the use of fluorinated hydrocarbons (CFC) in technical refrigeration systems. The reason why emis-sions into the atmosphere must be kept within limits is that the heat-absorbing properties of CFC represent a cau-se of the greenhouse effect and global climate warming.From the beginning of 2015, the new F-gas Regulation EU 517/2014 is effective. Planners, manufacturers, implemen-ters and operators of refrigeration systems must undergo considerable reorientation. The new directive narrows their choice of applicable refrigerants more than ever, marking a fundamental turn away from refrigerants with a high greenhouse effect. The goal set for the year 2030 is to reduce emissions of partly fluorinated hydrocarbons (HCFC) to a fifth of the average output 2009–2012. Alrea-dy in the near future, equipment for refrigerants with high greenhouse potential will be banned from the mar-ket, and refilling of existing systems will be subjected to restrictions.
As a technology partner for refrigeration, air-conditio-ning and heating applications GEA offers comprehen-sive advice and support for your switch to the natural refrigerants ammonia (NH3), carbon dioxide (CO2), and hydrocarbons (HC/R290). An extensive portfolio of com-pressors is available for any task.
Verdichter für natürliche KältemittelCompressors for natural refrigerants
2015 20272021 20242018 2030
100 %93 %
2015: Haushaltskühl- und Gefriergeräte (GWP ≥ 150)
2015: Household refrigeration appliances (GWP ≥ 150)
2025: Single-Split AC < 3 kg Füllmenge(GWP ≥ 750)
2025: Single-Split AC < 3 kg filling volume (GWP ≥ 750)
2020: Mobile Klimageräte (GWP ≥ 150)Stationäre Kühlanlagen (GWP ≥ 2500)Verbot für z. B. R404A, R507 inkl. Multipacks
2020: Mobile air-conditioning equipment (GWP ≥ 150), Stationary refrigeration systems (GWP ≥ 2500) Prohibited: e.g. R404A, R507 incl. multipacks
2022: Multipack gewerbliche Kühlung > 40 kW (GWP 150) – außer Primärkreis in Kaskaden (GWP < 1500)
2022: Multipack commercial refrigeration > 40 kW (GWP 150) – except primary circuit of cascaded systems (GWP < 1500)
63 %
45 %
31 %
24 %21 %
F-Gase-Verordnung – HFKW Kältemittel auf dem Rückzug
F-gas Regulation – HCFC on the way out
11www.gea.com |
CO2 compressors transcritical
Since the beginning of the 90‘s, GEA is engaged in the development of compressors for the transcritical CO2 process.The series has been extended by one greater compressor in the range of the 4- and 6-cylinder reciprocating com-pressors. The new HG46 CO2T is currently the biggest se-mi-hermetic reciprocating compressor for CO2 transcri-tical applications available on the market and convinces with its size (displacement from 21.8 to 38.2 m3/h) and its outstanding COP (coefficient of performance).
CO2 Verdichter transkritisch
Seit Anfang der 90er Jahre beschäftigt sich GEA mit der Entwicklung von Verdichtern für den transkritischen CO2 Prozess.Die Baureihe wurde nun um jeweils einen größeren Ver-dichter im Bereich der 4- und 6-Zylinder Hubkolbenver-dichter erweitert. Der neue HG46 CO2T ist der derzeit der größte halbhermetische Hubkolbenverdichter für transkritische CO2 Anwendungen auf dem Markt und überzeugt neben seiner Größe (Hubvolumen von 21,8 bis 38,2 m3/h) auch durch einen herausragenden COP (coef-ficient of performance).
Verdichter für natürliche KältemittelCompressors for natural refrigerants
Motoren für stufenlose Drehzahl- und Leistungsregelung
Motors for variable speed control
Geringer Ölwurf
Low oil carry over
Optimiertes Triebwerk
Optimized drive gear
Ölpumpe - Optimale Schmierung- Öldrucküberwachnung (optional)Dadurch bis zu 20 Hz Betrieb möglich
Oil pump- Optimal oil circulation- Oil pressure control (optional)Therefore up to 20 Hz operating possible
Konstruiert für transkritische CO2 Drücke- LP 100 bar- HP 150 bar
Designed for transcritical CO2 pressures- LP 100 bar- HP 150 bar
Höchster COP / EERIm Vergleich zum Wettbewerb
Highest COP / EERCompared to competitors
Das aktuelle Programm:3 Baugrößen mit 15 Hubraumstufen von 6,2 bis 38,2 m³/h (50 Hz)
The current program:3 model sizes with 15 capacity stages from 6.2 to 38.2 m³/h (50 Hz)
20
25
30
35
15
10
3D
isp
lace
me
nt
m/h
HGX(HAX)2 CO T2 HGX34 CO T2 HGX46 CO T2
40
6.2m³/h
7.7m³/h
9.9m³/h
11.3m³/h
12.9m³/h
14.5m³/h
20.1m³/h
25.5m³/h
16.3m³/h
18.2m³/h
27.2m³/h
30.2m³/h
21.8m³/h
24.4m³/h
38.2m³/h
NEU!
NEW!
NEU!
NEW!
12 | www.gea.com
CO2 compressors subcritical
Based on our current semi-hermetic product range, with its outstanding advantages and features, as well as our established basic range of CO2 compressors, an optimi-zed, downward extended capacity stage is now available for subcritical CO2 applications. The compressors are es-pecially suited to supermarket refrigeration applications and industrial refrigeration.
CO2 Verdichter subkritisch
Basierend auf unserem aktuellen Halbhermetikpro-gramm mit seinen herausragenden Vorzügen und Merk-malen sowie einer daraus entwickelten und schon seit längerer Zeit im Feldeinsatz bewährten Grundpalette an CO2 Verdichtern, steht nun eine optimierte und nach unten erweiterte Hubraumstufe für subkritische CO2 Anwendungen zur Verfügung. Besonders geeignet für Supermarktanwendungen und industrielle Kühlanlagen.
Effiziente Elektromotoren
High efficient electrical motor
Optimierte Zylinderdeckel & Strömung im Verdichter
Optimized cylinder heads & flow in the whole compressor
Langlebiges Triebwerk
High durable drive gear
Ölpumpe - Optimale Schmierung- Öldrucküberwachnung (optional)
Oil pump- Optimal oil circulation- Oil pressure control (optional)
Optimiertes Hub- / Bohrungsverhältnis für hocheffiziente Ventilplatten
Optimized bore & stroke ratio forhigh efficiency valve plates
series
With technical optimizations we continuously improve the energy consumption of our compressors. The com-pressors of the e-series set a new standard when it comes to motor-efficiency, gas flow and efficiency of the valve sy-stem. All this results in a higher refrigerating capacity of the compressor at a lower drive power. In addition, the limits of applications were extended to a condensing tem-perature of 15 °C and an evaporation temperature of -15 °C.
Serie
Durch technische Optimierungen verbessern wir per-manent den Energieverbrauch all unserer Verdichter. Die Verdichter der e-Serie setzen hinsichtlich Motoren- Wirkungsgrad, Gasströmung und Effizienz des Ventilsy-stems einen neuen Maßstab. Dies sorgt für eine höhere Kälteleistung des Verdichters bei verringerter Antriebs-leistung. Darüber hinaus wurden die Einsatzgrenzen auf eine Verflüssigungstemperatur von 15 °C, und die Ver-dampfungstemperatur auf -15 °C erweitert.
Erweitere Einsatzgrenzen
Extended limit of application
Konstruiert für subkritische CO2 Drücke- LP 40 bar (27 bar)- HP 55 bar
Designed for subscritical CO2 pressures- LP 40 bar (27 bar)- HP 55 bar
Verdichter für natürliche KältemittelCompressors for natural refrigerants
Das aktuelle Programm:4 Modellgrößen mit 17 Hubraumstufen von 1,6 to 48,2 m³/h (50 Hz)
50
25
3D
ispl
acem
ent
m/h
HGX12e CO2 HGX22e CO2 HGX4 CO2HGX4 CO2HGX4 CO2HGX34e CO2
1.6m³/h
3.6m³/h
4.5m³/h
11.2m³/h9.2
m³/h7.5m³/h
12.7m³/h
14.9m³/h
27.1m³/h
22.3m³/h
40.5m³/h
48.2m³/h
18.4m³/h
33.5m³/h
2.6m³/h
5.4m³/h
6.4m³/h
The current program:4 model sizes with 17 capacity stages from 1.6 to 48.2 m³/h (50 Hz)
NEU!
NEW!
13www.gea.com |
300
200
100
3D
ispla
cem
ent
m/h
HG8 HCHG7 HCHg6 HCHG5 HCHG34P HCHG22P HCHG12P HC Hg44e HC
5.4m³/h
6.7m³/h
8.0m³/h
9.4m³/h
11.1m³/h
13.7m³/h
16.5m³/h
62.9m³/h
82.2m³/h
93.7m³/h
33.1m³/h
72.2m³/h
18.8m³/h
22.1m³/h
27.3m³/h
107.6m³/h
140.6m³/h
161.4m³/h
122.4m³/h
183.6m³/h
245.9m³/h
279.8m³/h
214.3m³/h
41.3m³/h
57.7m³/h49.2
m³/h
67.0m³/h
HC compressors for hydrocarbons
For various applications, such as the field of supermarket refrigeration, hydrocarbons have established themselves as another natural alternative besides CO2. Due to the flammability of hydrocarbons the compressor has some safety related modifications.
HC Verdichter für Kohlenwasserstoffe
Für zahlreiche Anwendungen, wie beispielsweise im Su-permarktbereich haben sich in den vergangenen Jahren Kohlenwasserstoffe als weitere natürliche Alternative ne-ben CO2 etabliert. Auf Grund der Brennbarkeit der Koh-lenwasserstoffe bedarf es jedoch sicherheitsrelevanter Modifikationen des Verdichters.
Ölsumpfheizung(erforderlich)
Oil sump heater(neccessary)
Wärmeschutzthermostat
Thermal protection thermostat
Spezielle Ölfüllung Synth 68
Special oil charge Synth 68
Die Unterschiede zum SerienverdichterDifferences to a standard compressor
Elektronischer Motorschutz MP10 als Beipack zum Einbau im Schaltschrank
Electronic motor protection MP10enclosed for installation in the switch cabinet
Das aktuelle Programm:8 Baugrößen mit 27 Hubraumstufen von 5,4 bis 279,8 m³/h (50 Hz)
The current program:8 model sizes with 27 capacity stages from 5.4 to 279.8 m³/h (50 Hz)
Über diese Modelle hinaus, stehen Ihnen unsere ATEX-Verdichter zur Verfügung, die ebenfalls mit Kohlenwasserstoffen betrieben werden können. Nähere Informationen zu diesen Verdichtern finden Sie in unserem ATEX-Prospekt und auf Seite 12.
Additionally, ATEX compressors are available that can be operated with hydrocarbons as well. You can find more information about these compressors in our ATEX brochure and on page 12.
HG6 HCHG44e HC
Verdichter für natürliche KältemittelCompressors for natural refrigerants
NEU!
NEW!
14 | www.gea.com
Elektronischer Motorschutz MP10 als Beipack zum Einbau im Schalt-schrank (außerhalb der EX-Zone)
Electronic motor protection MP10supplied separately for installation in the switchboard (outside the EX zone)
Sicherheitsbarriere als Beipack zum Einbau im Schaltschrank (außerhalb der EX-Zone)
Safety barrier supplied separa-tely for installation in the switch-board (outside the EX zone)
Anschluss Potentialausgleich
Connection potential balance
Einstufung des Verdichters in Temperaturklasse T3
Compressor rated fortemperature class T3
Spezielle ATEX-Ausführung der elektrischen Bauteile
Special ATEX design of theelectrical components
Serienmäßige Überwachung aller Zylinderdeckel mit speziellen Wärmeschutzthermostaten
Standard hot gas monitoring ofall cylinder covers with specialthermal protection thermostat
Spezieller ATEX- Klemmkasten
Special ATEX terminal box
Das aktuelle Programm:6 Baugrößen mit 20 Hubraumstufen von 5,4 bis 279,8 m³/h (50 Hz)
The current program:6 model sizes with 20 capacity stages from 5.4 to 279.8 m³/h (50 Hz)
150
100
50
3D
isp
lace
men
t m
/h
EX-HG12P (HC) EX-HG6 (HC)EX-HG5 (HC)EX-HG4 (HC)EX-HG34e (HC)EX-HG22e (HC)
5.4m³/h
8.0m³/h
9.4m³/h
11.1m³/h
13.7m³/h
16.5m³/h
22.1m³/h
18.8m³/h
27.3m³/h
6.7m³/h
33.1m³/h
40.5m³/h
48.2m³/h
56.6m³/h
62.9m³/h
72.2m³/h
82.2m³/h
93.7m³/h
107.6m³/h
122.4m³/h
EX-HG8 (HC)EX-HG7 (HC)
140.6m³/h
161.4m³/h
183.6m³/h
214.3m³/h
245.9m³/h
279.8m³/h
200
250
300
Die Unterschiede zum SerienverdichterDifferences to a standard compressor
ATEX VerdichterATEX compressors
Das gesamte Programm ist nun auch als Kohlenwasserstoff (HC) Ausführung verfügbar.Now the entire program is also available as hydrocarbon (HC) version.
15www.gea.com |
ATEX compressors for zone 1
Within the European Union, electrical and mechanical machinery operated in explosive atmospheres must comp-ly with the ATEX (ATmospheres EXplosibles) conditions.The system designer must use correspondingly marked and certified components for these applications.GEA is the first European manufacturer who offers com-pressors which are conform to ATEX machine category 2.
Information on the compressors:The 2-, 4-, 6- and 8-cylinder models of the HG Series are the basic compressors for ATEX versions.
ATEX Verdichter für Zone 1
Elektrische sowie mechanische Geräte, die in explosiven Atmosphären betrieben werden, müssen innerhalb der Europäischen Union so genannte ATEX (ATmospheres EXplosibles) Bedingungen erfüllen.Für einen solchen Einsatz sind durch den Anlagenbauer entsprechend gekennzeichnete, konforme Komponenten zu verwenden.GEA bietet als erster europäischer Hersteller Verdichter an, die konform mit der ATEX-Gerätekategorie 2 sind.
Informationen zu den Verdichtern:Als Basisverdichter für die ATEX-Ausführungen kom-men die halbhermetischen 2-, 4-, 6- und 8-Zylinder GEA Verdichter der Modellreihe HG zur Anwendung.
Einstufung des Verdichters in Temperaturklasse T3 (max. 200 °C) Compressor rated for temperature class T3 (max. 200 °C)
Explosionsuntergruppe IIC (IIB bei Offshore Ausführung) Explosion sub-group IIC (IIB at Offshore design)
für den Einsatz in explosionsfähiger Atmosphäre, die durch Gase entsteht for use in explosive atmosphere caused by gas
Gerätegruppe II Machine group II
Geräteschutzniveau Equipment protective level
Kategorie 2 (Zone 1+2) bzw. Kategorie 3 (Zone 2) Category 2 (zone 1+2) resp. Category 3 (zone 2)
Explosionsschutzkennzeichnung gem. Richtlinie 94/9/EG Explosion protection marking as per directive 94/9/EC
ATEX Klassifizierung:
ATEX classification:
II 2G IIB/IIC T3 Gc
ATEX compressors for zone 2
Beside to the well-known zone 1 compressors, GEA also offers compressors which are compliant with the ATEX category 3 (zone 2). Upon request, these compressors are available with an offshore coating, e.g. for the use on oil rigs.Start-up for the new zone 2 compressors are the 6- and 8-cylinder compressors. Further types will follow.
Characteristics:- Confirmation of conformity by a notified body- Permissible ambient temperature range -20 °C to 60 °C- Wide range of accessories available- Explosion sub-group IIC- Optional available offshore package with: - Corrosion resistant multilayered coating, polyurethan free (Explosion sub-group IIB) - Corrosion resistant terminal box
ATEX Verdichter für Zone 2
Neben den bereits bekannten Zone 1 Verdichtern bietet GEA auch Verdichter an, die konform mit der ATEX-Ge-rätekategorie 3 sind (Zone 2). Diese Verdichter sind auf Wunsch mit einer Offshore Lackierung für den Einsatz zum Beispiel auf Bohrinseln erhältlich.Auftakt für die neuen Zone 2 Verdichter sind die 6- und 8-Zylinder Verdichter. Weitere Modelle folgen.
Besonderheiten:- Konformitätsbestätigung durch eine benannte Stelle- Zulässiger Umgebungstemperaturbereich -20 °C bis 60 °C- Umfangreiches Zubehör erhältlich- Explosionsuntergruppe IIC- Optional erhältliche Offshore Ausführung mit: - Korrosionsbeständiger mehrschichtiger Lackierung, polyurethanfrei (Explosionsuntergruppe IIB) - Korrosionsbeständiger Klemmkasten
ATEX VerdichterATEX compressors
Das gesamte Programm ist nun auch als Kohlenwasserstoff (HC) Ausführung verfügbar.Now the entire program is also available as hydrocarbon (HC) version.
16 | www.gea.com
VerflüssigungssätzeCondensing units
Verflüssigungssätze luftgekühltMit der aktuellen Aggregate-Baureihe bietet Ihnen GEA ein umfangreiches Programm von 5,4 bis 122,4 m³/h Hubvolumen. Im unteren und mittleren Leistungsbe-reich kommen dabei die Verdichter der Pluscom-Gene-ration zur Anwendung. Alle Aggregate sind nach einem durchgängigen Baukastenprinzip aufgebaut.
Besondere Merkmale der GEA Bock Verflüssigungssätze:
Universell Umfassender Anwendungsbereich (R134a, R407C, R404A, R507, R22) für Klima-, Normal- und Tiefkühlung
Zwei Verdichter-Varianten - HG-Ausführung mit Sauggaskühlung - HA-Ausführung mit Luftkühlung - mit den besonderen Vorteilen in der Tiefkühlung (R407F, R404A, R22)
Zuverlässige und sichere Ölversorgung Alle Verdichter sind mit klassischem Schmierölkreislauf und drehrichtungsunab hängiger Ölpumpe ausgerüstet
Hohe Kälteleistung bei reduzierter Leistungsaufnahme Großzügig dimensionierte Verflüssiger mit optimierten Rohrkreisläufen und Wärmeübergängen in Verbindung mit Hochleistungslüftern
Wirtschaftliche LüfterLüfter mit hocheffizienter Schaufelprofilierung, Motor in kompakter Außenläuferbauform einphasig (230V -1- 50/60Hz) mit Wicklungsschutz. Motor geeignet zur elektronischen Drehzahlregelung für optimale Verflüssi-gungsdruckeinstellung
Condensing units air-cooledWith the current series of units, GEA offers you a com-prehensive range from 5.4 to 122.4 m³/h displacement. In the lower and medium capacity range, the com-pressors of the Pluscom generation come into use. All GEA Bock units are constructed following a conti-nuous “module“ principle.
Special features:
Universal Wide range of uses (R134a, R407C, R 404A, R507, R22) for air-conditioning, medium and low temperature refri-geration applications
Two compressor variants - HG design with suction gas-cooling - HA design with air-cooling, particularly advantageous for low temperature applications (R407F, R404A, R22)
Reliable and safe oil supply All compressors are fitted with classic lubrication oil circulation and an oil pump which is independent of the direction of rotation
High refrigeration capacity with reduced energy con-sumption Generously proportioned condensers with optimized tube circulations and heat transmissi-on linked to high-performance fans
Efficient fansFans with highly efficient shovel fluting, motor in compact external rotor design, single-phase (230V -1- 50/60Hz) with winding protection. Motor suitable for electronic speed regulation for optimal condensation pressure setting
17www.gea.com |
Das aktuelle Programm:6 Baugrößen mit 20 Hubraumstufen von 5,4 bis 122,4 m³/h (50 Hz)
The current program:6 model sizes with 20 capacity stages from 5.4 to 122.4 m³/h (50 Hz)
200
100
3H
ubvo
lum
en m
/h
SHGZ7..LSHG6..LSHG5..LSHG44e..LSHG(SHA)34P..LSHG(SHA)22P..LSHG(SHA)12P..L
150
2501-stufig
Single-stage2-stufig
Two-stage
NEU!
NEW!
ASERCOM ZertifizierungBasierend auf den Anforderungen der EU Ökodesign-Richtlinie und der entsprechenden Verordnung
ASERCOM, der Verband der europäischen Hersteller von Komponenten für die Kälte- und Klimatechnik, beschäf-tigt sich mit wissenschaftlichen und technischen Her-ausforderungen, mit der Förderung von Leistungs- und Sicherheitsstandards, mit der Unterstützung eines besse-ren Umweltschutzes und mit der Versorgung der Kälte- und Klimaindustrie und deren Kunden.
Das neue ASERCOM Zertifizierungsprogramm für Verflüssigungssätze ermöglicht einen objektiven Lei-stungsvergleich des großen Produktangebots auf dem Markt.
Folgende GEA Bock Verflüssigungssätze sind „Certified Performance“ Produkte:
Plusbox• SHGX34e/255-4 PB• SHGX34e/315-4 PB• SHGX34e/380-4 PB
Luftgekühlte Verflüssigungssätze• SHGX34e/255-4 L• SHGX34e/380-4 L
ASERCOM certificationBased on the EU Ecodesign Directive and its related regulation
ASERCOM, the Association of European Component Manufacturers, is the platform for addressing scientific and technical challenges, promoting standards for perfor-mance and safety, encouraging better environment pro-tection and serving the refrigeration and airconditioning industry and its customers.
The new ASERCOM certification programme for con-densing units makes it possible to objectively compare the performance of the wide variety of products avai-lable on the market.
Following GEA Bock Condensing Units are „Certified Per-formance“ products:
Plusbox• SHGX34e/255-4 PB• SHGX34e/315-4 PB• SHGX34e/380-4 PB
Air-cooled Condensing Units• SHGX34e/255-4 L• SHGX34e/380-4 L
Dis
plac
emen
t m
3 /h
18 | www.gea.com
19www.gea.com |
Offene VerdichterOpen type compressors
Auf einen Blick 20At a glance
Besondere Merkmale 21Special features
F NH3 Verdichter 23F NH3 compressors
Verdichtersätze für Direktantrieb 23Compressor units for directive drive
20 | www.gea.com
Offene Verdichter
Open type compressors
F Verdichter
F compressor
F NH3 Verdichter
F NH3 compressor
FDK Verdichtersätze für Direktantrieb
FDK compressor units for direct drive
FDK NH3 Verdichtersätze
FDK NH3 compressor units
SFD Verdichtersätze für Direktantrieb mit Kupplungsglocke
SFD compressor units for direct drive with coupling bell
Offene VerdichterOpen type compressors
KühlhäuserCold stores
Prozesskälte (NH3)Process refrigeration (NH3)
Fischfang IndustrieFishing industry
EismaschinenIce machines
ObstkühlungFruit cooling
Maritime AnwendungenMaritime applications
SFD NH3 Verdichtersätze für Direktantrieb mit Kupplungsglocke
SFD NH3 compressor units for direct drive with coupling bell
21www.gea.com |
Offene VerdichterOpen type compressors
F28
600
500
400
F2 F3 F4 F5 F14 F16 F18
300
200
100
10.5m³/h
20.3m³/h
40.5m³/h
73.7m³/h
101.4m³/h
119.0m³/h
152.2m³/h
238.0m³/h
355.0m³/h
394.0m³/h
178.4m³/h
553.0m³/h
466.0m³/h
281.0m³/h
NEU!
NEW!
Dis
plac
emen
t m
3 /h
Das aktuelle Programm:8 Baugrößen mit 14 Hubraumstufen von 10,5 bis 553,0 m³/h (1.450 1/min)
The current program:8 model sizes with 14 capacity stages from 10.5 to 553.0 m³/h (1450 rpm)
Mit der Modellreihe F stehen Ihnen moderne offene GEA Verdichter für Fremdantrieb (über Keilriemen oder Kupp-lung) zur Verfügung. Es sind nahezu alle antriebsbedingten Anforderungen möglich.
Kompakte Bauweise- Robust und problemlos in der Handhabung- Geeignet für Riemen- oder Kupplungsantrieb- Großes Anwendungsgebiet mit breitem Drehzahlband- Selbstverständlich mit Ölpumpenschmierung
Leise und schwingungsarm- Großzügig dimensionierter Kurbelbetrieb- Optimierter Massenausgleich- Großvolumiger Druckraum zur Pulsationsdämpfung
Universell- z.B. R134a, R404A, R507, R407C, R22- Eine Verdichterausführung für alle gängigen Kältemittel-, für Klimaanwendungen, Normal- oder Tiefkühlung. Maximal zulässiger Betriebsdruck: 28 bar - Verdichterausführungen für NH3
The F model series provides modern open type compres-sors for separate drive systems (using V belts or direct couplings). Virtually all drive capacity requirements can be met.
Compact construction- Robust and easy to handle- Suitable for v-belt or coupling drive- Large number of applications with a wide r.p.m. range- Naturally with oil pump lubrication
Quiet with low vibrations- Large-dimensioned crankshaft area- Dynamic mass balance- High volume pressure area to dampen pulsations
Universal- e.g. R134a, R404A, R507, R407C, R22- One compressor design for all conventional refrigerants, for air conditioning applications, normal or deep-freezing. Maximum permissible operating pressure: 28 bar- Compressor designs for NH3
22 | www.gea.com
mexxFlow valve plate
More refrigerating capacity and lower power consumption – this is the motto of the new mexxFlow valve plate, which forms the heart of the new GEA compressor generations.
Concerning the increase in energy efficiency of reciproca-ting compressors, one focus of compressor manufacturers has always been on the valve plate system. It is necessary to release the energy, which is applied by an electric mo-tor, efficiently to the refrigerating circuit. GEA has also put its focus of continuous development of reciprocating com-pressors on the valve plate system – the mexxFlow valve plate reflects the result of this development work.
GEA was successful in increasing the efficiency of its compressors by around 20 %. This success was achieved through a flow-optimized double ring fin construction of the valve plate in combination with a cylinder head, which is specially adapted to the valve plate. Thus, open as well as semi-hermetic GEA Bock compressors achieve records in terms of efficiency.
- Valve plate with highly efficient double ring fins- Fins made out of high-quality, impact-resistant spring steel- Flow optimized system of valve plate and cylinder head
mexxFlow Ventilplatte
Mehr Kälteleistung bei gleichzeitig geringerer Leistungs-aufnahme – so lautet die Formel der mexxFlow Ventilplat-te, die das Herzstück der neuen GEA Verdichtergeneratio-nen darstellt.
Wenn es darum geht, die Energieeffizienz von Hubkolben-verdichtern zu steigern, liegt seit jeher ein Fokus der Ver-dichterhersteller auf dem Ventilsystem. Gilt es doch hier die mittels Elektromotor aufgebrachte Energie möglichst effizient an den Kältekreislauf abzugeben. Auch GEA hat ihren Fokus der permanenten Weiterentwicklung an Hubkolbenverdichtern auf das Ventilsystem gelegt – die mexxFlow Ventilplatte spiegelt das Ergebnis dieser Ent-wicklungsarbeit wider.
GEA ist es gelungen durch eine strömungstechnisch per-fektionierte Doppelringlamellen-Konstruktion der Ventil-platte in Kombination mit einem speziell auf die Ventil-platte zugeschnittenen Zylinderkopf die Effizienz seiner Verdichter um rund 20 % zu steigern. Damit erreichen offene sowie halbhermetische GEA Bock Verdichter Best-marken in Punkto Effizienz.
- Ventilplatte mit hoch effizienten Doppelringlamellen- Lamellen aus hochwertigem, schlagzähem Federstahl- Strömungstechnisch optimiertes System aus Ventilplatte und Zylinderkopf
mexxFlow vs. vorheriges DesignmexxFlow vs. previous design
Offene VerdichterOpen type compressors
23www.gea.com |
F NH3 compressors
Based on the F compressor series, a specially modified selection of compressors is available for use with the re-frigerant R717.2-, 4- and 6-cylinder models with displacements of 10 to 180 m³/h (1450 rpm).FDK18 NH3 and SFD18 NH3 being prepared.
F NH3 Verdichter
Auf Basis der F-Verdichter Baureihe steht für den Einsatz mit dem Kältemittel R717 eine speziell dafür modifizierte Auswahl an Verdichtern zur Verfügung.2-, 4- und 6-Zylinder-Modelle mit Hubvolumen von 10 bis 180 m³/h (1.450 1/min).FDK18 NH3 und SFD18 NH3 in Vorbereitung.
Compressor units for directive drive
FDK compressor unitsBased on the F compressor series with its many designs and application options, a selection of compressor units with compact construction is available for use with direct drive.Compressor with flexible shaft coupling for direct drive mounted on a profile base frame. The power transmissi-on from motor to compressor occurs via an elastic flexib-le shaft coupling. ICE standard motors of type IM B3 are used as drive motors (option).
SFD compressor unitsCompressor with flexible shaft coupling for direct drive mounted on a profile base frame. Power transmission from motor to compressor occurs via an elastic flexible shaft coupling. The automatic self-aligning of motor and compressor is achieved using coupling bell. ICE standard motors of type IM B5 are used as drive motors (option).Currently only available for SFD18.
Verdichtersätze für Direktantrieb
FDK VerdichtersätzeAuf Basis der F-Verdichter mit ihrer Vielzahl an Ausfüh-rungsvarianten und Anwendungsmöglichkeiten, steht für den Einsatz mit Direktantrieb eine Auswahl kompakt auf-gebauter Verdichtersätze zur Verfügung.Verdichter mit Wellenkupplung für Direktantrieb aufge-baut auf einem Profilgrundrahmen. Die Kraftübertragung vom Motor zum Verdichter erfolgt über eine elastische Wellenkupplung. Als Antriebsmotoren werden ICE-Norm-motoren der Bauform IM B3 eingesetzt (Option).
SFD VerdichtersätzeVerdichter mit Wellenkupplung für Direktantrieb aufge-baut auf einem Profilgrundrahmen. Die Kraftübertragung vom Motor zum Verdichter erfolgt über eine elastische Wellenkupplung. Die automatische Selbstausrichtung von Motor und Verdichter wird mittels Kupplungsglocke erzielt. Als Antriebsmotoren werden ICE-Normmotoren der Bauform IM B5 eingesetzt (Option).Derzeit nur für SFD18 verfügbar.
FDK18 SFD18
Offene VerdichterOpen type compressors
24 | www.gea.com
25www.gea.com |
Verdichter für mobile AnwendungenCompressors for mobile applications
Auf einen Blick 26At a glance
Besondere Merkmale 27Special features
HG 2-polige Verdichter 29HG 2-pole compressors
HG Aluminium Verdichter 29HG aluminium compressors
26 | www.gea.com
Verdichter für mobile Anwendungen
Compressors for mobile applications
BusklimatisierungBus air-conditioning
BahnklimatisierungRail air-conditioning
TransportkälteTransport refrigeration
FK Fahrzeugverdichter
FK vehicle compressors
HG halbhermetische Verdichter
HG semi-hermetic compressors
K-Ventilplatte (Klimatisierung)
K-valve plate (air-conditioning)
N-Ventilplatte (Klimatisierung oder Normalkühlung)
N-valve plate (air-conditioning or medium temperature)
TK-Ausführung (Tiefkühlung)
TK-version (low temperature)
Verdichter für mobile AnwendungenCompressors for mobile applications
Grauguss Ausführung
Cast iron version
Alu Ausführung
Aluminium version
2- und 4-polige Motorausführung
2- and 4-pole motor version
R407C Ausführung (HP 35 bar)
R407C version (HP 35 bar)
27www.gea.com |
Vehicle compressors FK
GEA Bock vehicle compressors of the FK range are the result of many years of experience in the area of mobi-le refrigeration systems. The unsurpassed light, compact, robust design and wide r.p.m. range are only some of the outstanding features of this unique product range of 2-, 4- and 6-cylinder compressors. A wide variety of designs can be tailored to suit individual requirements.The so-called K version is a special innovation with a uni-que valve plate system for maximum requirements in bus and coach air-conditioning systems.
- Compressors for bus and train air-conditioning- Compressors for transport refrigeration and other applications
Whether in bus- or railway air-conditioning, transport re-frigeration or other applications of mobile cooling – GEA Bock FK compressors are specialists around the world.
- Unsurpassed light and compact design- Highly robust design- Wide speed range- Efficient operating performance- Universal application- Easy to service
Fahrzeugverdichter FK
GEA Bock Fahrzeugverdichter der Baureihe FK sind das Ergebnis jahrzehntelanger Erfahrung im Bereich mobiler Kühlung. Unübertroffen leicht, kompakt, robust und ein großes Drehzahlband sind nur einige der herausragen-den Merkmale dieser einzigartigen Produktpalette mit 2-, 4- und 6-Zylinder-Verdichtern. Zugeschnitten auf den in-dividuellen Anwendungsfall sind die unterschiedlichsten Ausführungsvarianten möglich.Eine besondere Innovation stellt die sogenannte K-Version dar. Ein einmaliges Ventilplattensystem für höchste An-sprüche in der Busklimatisierung.
- Verdichter für Bus- und Bahnklimatisierung- Verdichter für Transportkühlung und andere Anwendungen
Ob in der Bus- oder Bahnklimatisierung, der Transport-kühlung oder in anderen Anwendungen der mobilen Kälte – GEA Bock FK Verdichter sind weltweit die Spezialisten.
- Unübertroffen leicht und kompakt- Äußerst robustes Design- Breites Drehzahlband- Effizientes Betriebsverhalten- Universelle Einsatzmöglichkeiten- Servicefreundlich
Verdichter für mobile AnwendungenCompressors for mobile applications
28 | www.gea.com
Three design variations are available for different areas of application:
- For air-conditioning – the K design- For air-conditioning or medium temperature – the N design- For low temperature – the TK design
The differences are essentially associated with the valve plate, which is adapted to each application range in terms of operational safety and efficiency. Additionally we have different solutions for the flexible adaptation of the com-pressors for your individual requirements.
Es stehen drei Ausführungsvarianten für unterschiedliche Einsatzbereiche zur Auswahl:
- Für die Klimatisierung die K-Ausführung- Für die Klima- oder Normalkühlung die N-Ausführung- Für die Tiefkühlung die TK-Ausführung
Die Unterschiede liegen im Wesentlichen in der Ventil-plattenbestückung, die in punkto Betriebssicherheit und Effizienz dem jeweiligen Anwendungsbereich angepasst ist. Darüber hinaus verfügen wir über vielfältige Möglich-keiten zur flexiblen Anpassung der Verdichter an Ihre in-dividuellen Wünsche.
Das aktuelle Programm:4 Baugrößen mit 14 Hubraumstufen von 10,3 bis 84,9 m³/h (1.450 1/min)
The current program:4 model sizes with 14 capacity stages from 10.3 to 84.9 m³/h (1450 rpm)
Verdichter für mobile AnwendungenCompressors for mobile applications
500
250
1000
750
Swep
t vo
lum
e cm
³
FK20 FK30 FK40 FK50
118.0cm³
143.0cm³
170.0cm³
233.0cm³
277.0cm³
325.0cm³
466.0cm³
650.0cm³
385.0cm³
554.0cm³
662.0cm³
776.0cm³
831.0cm³
976.0cm³
29www.gea.com |
HG 2-pole compressors
Especially power-intensive applications, such as mobi-le air-conditioning, GEA also offers the Pluscom model HG34P in 2-pole design.
HG aluminium compressors
With the two models HG22 and HG34 in full-aluminium, lightweight construction, GEA offers the perfect solution for all application areas in which the weight of the com-pressor is important.
HG 2-polige Verdichter
Für besonders leistungsintensive Anwendungen, wie die mobile Klimatisierung, bietet GEA darüber hinaus das Pluscom Modell HG34P in 2-poliger Ausführung an.
HG Aluminium Verdichter
Mit den beiden Modellen HG22 sowie HG34 in Vollalumi-nium-Leichtbauweise bietet GEA die perfekte Lösung für alle Anwendungsgebiete, bei denen es auf das Gewicht des Verdichters ankommt.
Das aktuelle Programm:3 Baugrößen mit 14 Hubraumstufen von 5,4 bis 33,1 m³/h (1.450 1/min) sowie von 44,3 bis 66,1 m³/h (2.900 1/min)
The current program:3 model sizes with 14 capacity stages from 5.4 to 33.1 m³/h (1450 rpm) and from 44.3 to 66.1 m³/h (2900 rpm)
Dis
pla
cem
ent
m³/
h
30
20
50
40
60
70
10 6.7m³/h5.4
m³/h
8.0m³/h
9.4m³/h
11.1m³/h
13.7m³/h
16.5m³/h
22.1m³/h
33.1m³/h
18.8m³/h
27.3m³/h
44.3m³/h
54.7m³/h
66.1m³/h
HG12 HG22 HG34 HG34
4-polig4-pole
2-polig2-pole
Graugusscast iron
Aluminium und Graugussaluminium and cast iron
Aluminium und Graugussaluminium and cast iron
Aluminium und Graugussaluminium and cast iron
Verdichter für mobile AnwendungenCompressors for mobile applications
30 | www.gea.com
Weil man nie auslernt –GEA Schulungen & Workshops rund um den Verdichter
Bereits seit vielen Jahren hat GEA sein Engagement im Bereich der Kundenschulung intensiviert.So bieten wir von zweitägigen Praktiker Workshops in Frickenhausen bis hin zu Afterwork Workshops quer durch Deutschland ein umfangreiches Angebot an attrak-tiven Schulungsveranstaltungen – ganz gleich für welche Art von Schulungsmaßnahme sie sich interessieren.
Drei Sachverhalte zeichnen alle Maßnahmen von GEA aus:- Zum einen die mitreißende Art und Weise, in der unser Schulungsleiter die Veranstaltungen durchführt- Der ausgeprägte Praxisbezug der Schulungen
Für weitere Fragen oder Beratung wenden Sie sich bitte an unseren Schulungsleiter:
Peter SpiesTelefon +49 7022 945 4-157Fax +49 7022 945 4-137Email: [email protected]
Because you're never done learning –GEA training and workshops on compressors
Many years ago, GEA intensified its commitment in the area of customer training.Therefore, we offer an extensive range of attractive trai-ning events, from two-day practitioners' workshops in Frickenhausen to afterwork workshops throughout Ger-many – regardless of the type of training you are inte-rested in.
Three things are characteristic of all GEA training:- The captivating way that the training director carries out the events- The strong practice orientation of the training events
For additional questions or advice, please contact our training director:
Peter SpiesTelephone +49 7022 945 4-157Fax +49 7022 945 4-137Email: [email protected]
GEA Verdichter SchulungenGEA compressor trainings
31www.gea.com |
GEA Verdichter onlineGEA compressors online
International austauschen und verlinken bei Linkedin.
International exchange and land get con- nected on Linkedin.
www.linkedin.com/groups/GEA-Food-4225307
YouTube
Produktvideos und Animationen zu GEA finden Sie auf YouTube.
You can find product videos and animations of GEA on YouTube.
www.youtube.com/user/theGEAgroup
Treten Sie mit uns in einen Dialog und in-formieren Sie sich über alle Neuigkeiten der Transport-Industrie.
Please contact us and stay updated with all the latest news in the transportation industry.
www.facebook.com/GEAtransportation
Folgen Sie uns auf Twitter und bleiben Sie immer up-to-date.
Follow us on Twitter and be always up-to-date.
www.twitter.com/GEA_Events www.twitter.com/GEA_Food
VAP Compressor selection program
The GEA Bock compressor selection software supports you in searching the suitable compressor or rather condensing unit for your application. On the basis of the searched re-frigerating capacity and operating condition (refrigerant, evaporation and condensing temperature) suitable com-pressors will be found. Furthermore the software provi-des additional information on the chosen compressor (e. g. technical data, scope of supply & accessoires, measures etc.).
The compressor selection program is available as webbased online-version as well as offline-version for installation on the computer.
- Find suitable compressors quickly- Software-date on a daily basis- For stationary and mobile applications- All compressors in one version
Here‘s the direct way to the online-version:
Social Media
GEA is represented in the following social media networks:
VAP Verdichterauswahlprogramm
Das GEA Bock Verdichterauswahlprogramm unterstützt Sie bei der Suche nach dem passenden Verdichter bzw. Verflüssigungsaggregat für Ihre Anwendung. Anhand der gesuchten Kälteleistung und Betriebsbedingung (Käl-temittel, Verdampfungs- und Verflüssigungstemparatur) werden geeignete Verdichter gefunden. Darüber hinaus stellt Ihnen die Software weitere Informationen zum ge-wählten Verdichter bereit (z. B. Technische Daten, Liefer-umfang & Zubehör, Maße etc.).
Das Auswahlprogramm steht Ihnen so- wohl als webbasierte Online-Version, als auch als Offline-Version zur Installation auf den PC zur Verfügung.
- Schnelles Finden des passenden Verdichters- Tagesaktualität des Datenmaterials der Software- Für stationäre und mobile Anwendungen- Alle Verdichter in einer Version
Hier gehts direkt zur Online-Version:
Soziale Netzwerke
GEA ist zudem auf folgenden sozialen Netzwerken ver-treten:
VAPStationaryApplications
VAPMobile
Applications
© G
EA G
roup
AG
. All
right
s re
serv
ed.
GEA Refrigeration Technologies
GEA Bock GmbH
Benzstrasse 7, 72636 Frickenhausen, GermanyPhone: +49 7022 9454-0, Fax: +49 7022 [email protected], www.gea.com
We live our values.Excellence • Passion • Integrity • Responsibility • GEA-versity
GEA Group is a global engineering company with multi-billion euro sales and operations in more than 50 countries. Founded in 1881, the company is one of the largest providers of innovative equipment and process technology. GEA Group is listed in the STOXX® Europe 600 Index.