How to launch MPLAB_X• First thing is to run „cad“
• Then go to your „P“ folder
• Download and store the start script to „P“ folder
• Link is shown below
• Change the file permissionswith chmod
• And then run the start script
april 2016 Hardi Selg 2
http://blue.pri.ee/ttu/files/Prog2/Files/start
• After running the script this window should open
• After that from the „File“ menu create a „New Project“
april 2016 Hardi Selg 3
Creating a project
Select XC8 compiler Change the project location to you „P“ folder
april 2016 Hardi Selg 6
• After pushing „Finish“ a project should appear to the left side of the main window
• Now the next step is to download default files for the project
• They can be found on this link:
http://ati.ttu.ee/~hartz/mplabx/
april 2016 Hardi Selg 7
Downloading default files (http://ati.ttu.ee/~hartz/mplabx/ )
• Save them to your previously defined project location
april 2016 Hardi Selg 8
Adding files to project• To add files make a right click on
the Header/Source Files name and select „Add Existing Item“
• From there you should see your downloaded files and add them accordingly
april 2016 Hardi Selg 9