Standards published

New International Standards published between 01 September and 30 September 2016

* Available in English only

** French version of standard previously published in English only

Price group

IIW International Institute of Welding

ISO 14272:2016

Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds

B

TC 6 Paper, board and pulps

ISO 2470-1:2016

Paper, board and pulps — Measurement of diffuse blue reflectance factor — Part 1: Indoor daylight conditions (ISO brightness)

B

TC 8 Ships and marine technology

ISO 19356:2016 * Ships and marine technology — Marine cranes — Test specifications and procedures A

ISO 22472:2016 * Ships and marine technology — Guidelines for the operation and installation of voyage data recorder (VDR)

F

TC 10 Technical product documentation

ISO 9177-1:2016

Mechanical pencils for technical drawings — Part 1: Classification, dimensions, perfor-mance requirements and testing

B

TC 20 Aircraft and space vehicles

ISO 17851:2016 * Space systems — Space environment simulation for material tests — General principles and criteria

D

TC 21 Equipment for fire protection and fire fighting

ISO 14520-2:2016 * Gaseous fire-extinguishing systems — Physical properties and system design — Part 2: CF3I extinguishant

A

ISO 14520-5:2016 * Gaseous fire-extinguishing systems — Physical properties and system design — Part 5: FK-5-1-12 extinguishant

B

ISO 14520-6:2016 * Gaseous fire-extinguishing systems — Physical properties and system design — Part 6: HCFC Blend A extinguishant

B

ISO 14520-8:2016 * Gaseous fire-extinguishing systems — Physical properties and system design — Part 8: HFC 125 extinguishant

B

ISO 14520-9:2016 * Gaseous fire-extinguishing systems — Physical properties and system design — Part 9: HFC 227ea extinguishant

B

ISO 14520-10:2016 * Gaseous fire-extinguishing systems — Physical properties and system design — Part 10: HFC 23 extinguishant

B

ISO 14520-11:2016 * Gaseous fire-extinguishing systems — Physical properties and system design — Part 11: HFC 236fa extinguishant

B

TC 22 Road vehicles

ISO 19365:2016 * Passenger cars — Validation of vehicle dynamic simulation — Sine with dwell stability con-trol testing

B

TC 28 Petroleum products and related products of synthetic or biological origin

ISO 3924:2016

Petroleum products — Determination of boiling range distribution — Gas chromatography method

D

TC 29 Small tools

ISO 8051:2016

Long shank taps with nominal diameters from M3 to M10 — Full-diameter shank taps with recess

A

ISO 10898:2016

Spot drills A

TC 34 Food products

ISO 12824:2016

Royal jelly — Specifications E

TC 38 Textiles

ISO 1144:2016

Textiles — Universal system for designating linear density (Tex System) B

TC 44 Welding and allied processes

ISO 3677:2016

Filler metal for soldering and brazing — Designation A

ISO 17672:2016

Brazing — Filler metals D

ISO 20168:2016

Resistance welding — Locking tapers for electrode holders and electrode caps A

TC 45 Rubber and rubber products

ISO 1827:2016

Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods

B

ISO 6235:2016

Rubber, raw — Determination of block polystyrene content — Ozonolysis method

A

ISO 2286-1:2016

Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 1: Meth-ods for determination of length, width and net mass

A

ISO 2286-2:2016

Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Meth-ods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate

A

ISO 2286-3:2016

Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 3: Method for determination of thickness

A

TC 61 Plastics

ISO 11469:2016

Plastics — Generic identification and marking of plastics products A

ISO 11357-1:2016

Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles E

TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries

ISO 14224:2016 * Petroleum, petrochemical and natural gas industries — Collection and exchange of reliabil-ity and maintenance data for equipment

H

ISO 16961:2015

Petroleum, petrochemical and natural gas industries — Internal coating and lining of steel storage tanks

F

ISO 20088-1:2016 * Determination of the resistance to cryogenic spillage of insulation materials — Part 1: Liquid phase

D

TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use

ISO 8536-13:2016

Infusion equipment for medical use — Part 13: Graduated flow regulators for single use with fluid contact

A

TC 83 Sports and other recreational facilities and equipment

ISO 23537-1:2016

Requirements for sleeping bags — Part 1: Thermal and dimensional requirements D

ISO 23537-2:2016

Requirements for sleeping bags — Part 2: Fabric and material properties A

TC 85 Nuclear energy, nuclear technologies, and radiological protection

ISO 16645:2016 * Radiological protection — Medical electron accelerators — Requirements and recommen-dations for shielding design and evaluation

G

TC 87 Cork

ISO 2190:2016

Granulated cork — Determination of moisture content A

TC 92 Fire safety

ISO/TS 19700:2016 * Controlled equivalence ratio method for the determination of hazardous components of fire effluents — Steady-state tube furnace

F

TC 94 Personal safety -- Protective clothing and equipment

ISO/TS 16975-2:2016

Respiratory protective devices — Selection, use and maintenance — Part 2: Condensed guidance to establishing and implementing a respiratory protective device programme

C

TC 96 Cranes

ISO 4302:2016

Cranes — Wind load assessment D

TC 106 Dentistry

ISO 17509:2016

Dentistry — Torque transmitter for handpieces A

TC 107 Metallic and other inorganic coatings

ISO 19207:2016

Thermal spraying — Classification method of adhesive strength by indentation C

ISO 19477:2016

Metallic and other inorganic coatings — Measurement of Young's modulus of thermal barri-er coatings by beam bending

C

TC 108 Mechanical vibration, shock and condition monitoring

ISO 10815:2016

Mechanical vibration — Measurement of vibration generated internally in railway tunnels by the passage of trains

D

ISO/TS 14837-32:2015

Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 32: Measurement of dynamic properties of the ground

G

TC 110 Industrial trucks

ISO 10896-7:2016 * Rough-terrain trucks — Safety requirements and verification — Part 7: Longitudinal load moment systems

B

TC 113 Hydrometry

ISO 6420:2016 * Hydrometry — Position fixing equipment for hydrometric boats B

TC 121 Anaesthetic and respiratory equipment

ISO 5366:2016

Anaesthetic and respiratory equipment — Tracheostomy tubes and connectors D

TC 123 Plain bearings

ISO 12131-2:2016 * Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 2: Functions for the calculation of thrust pad bearings

B

ISO 12167-1:2016 * Plain bearings — Hydrostatic plain journal bearings with drainage grooves under steady-state conditions — Part 1: Calculation of oil-lubricated plain journal bearings with drainage grooves

E

ISO 20054:2016 * Plain bearings — Bearings containing dispersed solid lubricants

B

TC 127 Earth-moving machinery

ISO 9244:2008/Amd 1:2016

Earth-moving machinery — Machine safety labels — General principles — Amendment 1

XZ

TC 131 Fluid power systems

ISO 1219-3:2016 * Fluid power systems and components — Graphical symbols and circuit diagrams — Part 3: Symbol modules and connected symbols in circuit diagrams

D

ISO/TS 11672:2016 * Connectors for fluid power and general use — Designation and nomenclature C

TC 150 Implants for surgery

ISO 13779-6:2015

Implants for surgery — Hydroxyapatite — Part 6: Powders B

ISO 7206-2:2011/Amd 1:2016

Implants for surgery — Partial and total hip joint prostheses — Part 2: Articulating surfaces made of metallic, ceramic and plastics materials — Amendment 1

XZ

ISO 7206-12:2016

Implants for surgery — Partial and total hip joint prostheses — Part 12: Deformation test method for acetabular shells

B

ISO 14242-2:2016

Implants for surgery — Wear of total hip-joint prostheses — Part 2: Methods of measure-ment

A

ISO 14243-2:2016

Implants for surgery — Wear of total knee-joint prostheses — Part 2: Methods of measure-ment

A

TC 159 Ergonomics

ISO 6385:2016

Ergonomics principles in the design of work systems C

TC 164 Mechanical testing of metals

ISO 27306:2016 * Metallic materials — Method of constraint loss correction of CTOD fracture toughness for fracture assessment of steel components

F

TC 165 Timber structures

ISO 18402:2016 * Timber structures — Structural insulated panel roof construction — Test methods D

TC 172 Optics and photonics

ISO 10938:2016

Ophthalmic optics — Chart displays for visual acuity measurement — Printed, projected and electronic

A

ISO 11381:2016

Ophthalmic optics — Spectacle frames — Screw threads A

TC 180 Solar energy

ISO 22975-1:2016

Solar energy — Collector components and materials — Part 1: Evacuated tubes — Durabil-ity and performance

E

ISO 22975-2:2016

Solar energy — Collector components and materials — Part 2: Heat-pipes for solar thermal application — Durability and performance

D

TC 182 Geotechnics

ISO 22477-10:2016 * Geotechnical investigation and testing — Testing of geotechnical structures — Part 10: Testing of piles: rapid load testing

D

TC 184 Automation systems and integration

ISO 8000-100:2016 * Data quality — Part 100: Master data: Exchange of characteristic data: Overview C

ISO 8000-120:2016 * Data quality — Part 120: Master data: Exchange of characteristic data: Provenance D

ISO 8000-130:2016 * Data quality — Part 130: Master data: Exchange of characteristic data: Accuracy B

ISO 8000-140:2016 * Data quality — Part 140: Master data: Exchange of characteristic data: Completeness B

TC 199 Safety of machinery

ISO/TR 22100-3:2016 * Safety of machinery — Relationship with ISO 12100 — Part 3: Implementation of ergonom-ic principles in safety standards

F

TC 201 Surface chemical analysis

ISO 15471:2016 * Surface chemical analysis — Auger electron spectroscopy — Description of selected in-strumental performance parameters

A

ISO 17973:2016 * Surface chemical analysis — Medium-resolution Auger electron spectrometers — Calibra-tion of energy scales for elemental analysis

B

TC 204 Intelligent transport systems

ISO 18495-1:2016 * Intelligent transport systems — Commercial freight — Automotive visibility in the distribution supply chain — Part 1: Architecture and data definitions

D

ISO 19079:2016 * Intelligent transport systems — Communications access for land mobiles (CALM) — 6LoWPAN networking

D

TC 206 Fine ceramics

ISO 18610:2016 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determina-tion of elastic properties by ultrasonic technique

D

TC 209 Cleanrooms and associated controlled environments

ISO 14644-14:2016

Cleanrooms and associated controlled environments — Part 14: Assessment of suitability for use of equipment by airborne particle concentration

D

TC 211 Geographic information/Geomatics

ISO 19104:2016 * Geographic information — Terminology H

ISO 19160-1:2015

Addressing — Part 1: Conceptual model G

TC 213 Dimensional and geometrical product specifications and verification

ISO 10360-12:2016

Geometrical product specifications (GPS) — Acceptance and reverification tests for coordi-nate measuring systems (CMS) — Part 12: Articulated arm coordinate measurement ma-chines (CMM)

F

ISO 18391:2016

Geometrical product specifications (GPS) — Population specification C

TC 215 Health informatics

ISO/IEEE 11073-10418:2014/Cor 1:2016

* Health informatics — Personal health device communication — Part 10418: Device special-ization — International Normalized Ratio (INR) monitor — Technical Corrigendum 1

free

TC 220 Cryogenic vessels

ISO 21028-1:2016

Cryogenic vessels — Toughness requirements for materials at cryogenic temperature — Part 1: Temperatures below -80 degrees C

B

TC 228 Tourism and related services

ISO 17679:2016 * Tourism and related services — Wellness spa — Service requirements C

TC 229 Nanotechnologies

ISO/TR 16196:2016 * Nanotechnologies — Compilation and description of sample preparation and dosing meth-ods for engineered and manufactured nanomaterials

C

TC 244 Industrial furnaces and associated processing equipment

ISO 13577-1:2016 * Industrial furnaces and associated processing equipment — Safety — Part 1: General re-quirements

F

ISO 13577-3:2016 * Industrial furnaces and associated processing equipment — Safety — Part 3: Generation and use of protective and reactive atmosphere gases

G

TC 257 Evaluation of energy savings

ISO 17743:2016

Energy savings — Definition of a methodological framework applicable to calculation and reporting on energy savings

C

TC 266 Biomimetics

ISO 18457:2016 * Biomimetics — Biomimetic materials, structures and components F

TC 274 Light and lighting

ISO/CIE 11664-5:2016

Colorimetry — Part 5: CIE 1976 L*u*v* colour space and u', v' uniform chromaticity scale diagram

B

TC 299 Robotics

ISO 18646-1:2016

Robotics — Performance criteria and related test methods for service robots — Part 1: Locomotion for wheeled robots

C

JTC 1 Information technology

ISO/IEC TS 33072:2016 * Information technology — Process assessment — Process capability assessment model for information security management

H

ISO/IEC 27036-4:2016 * Information technology — Security techniques — Information security for supplier relation-ships — Part 4: Guidelines for security of cloud services

D

ISO/IEC 23003-3:2012/Cor 3:2015

* Information technology — MPEG audio technologies — Part 3: Unified speech and audio coding — Technical Corrigendum 3

free

ISO/IEC 15459-1:2014 * Information technology — Automatic identification and data capture techniques — Unique identification — Part 1: Individual transport units

B

ISO/IEC 15459-4:2014 * Information technology — Automatic identification and data capture techniques — Unique identification — Part 4: Individual products and product packages

B

ISO/IEC 15459-5:2014 * Information technology — Automatic identification and data capture techniques — Unique identification — Part 5: Individual returnable transport items (RTIs)

B

ISO/IEC 15459-6:2014 * Information technology — Automatic identification and data capture techniques — Unique identification — Part 6: Groupings

B

ISO/IEC 9995-9:2016

Information technology — Keyboard layouts for text and office systems — Part 9: Multi-lingual, multiscript keyboard layouts

H

ISO/IEC 19794-5:2005 * Information technology — Biometric data interchange formats — Part 5: Face image data H

ISO/IEC 29794-1:2016 * Information technology — Biometric sample quality — Part 1: Framework D

ISO/IEC 19086-1:2016 * Information technology — Cloud computing — Service level agreement (SLA) framework — Part 1: Overview and concepts

E

ISO/IEC TR 30132-1:2016 * Information technology — Information technology sustainability — Energy efficient compu-ting models — Part 1: Guidelines for energy effectiveness evaluation

D

ISO/IEC TR 38504:2016 * Governance of information technology — Guidance for principles-based standards in the governance of information technology

B

Standards confirmed

The following International Standards are confimred for a five year period:

TC 4 Rolling bearings

ISO/TS 16281:2008 (reconfirmed)

ISO 20516:2007 (reconfirmed)

TC 6 Paper, board and pulps

ISO 5350-3:2007 (reconfirmed)

ISO 10376:2011

ISO 17812:2007 (reconfirmed)

TC 20 Aircraft and space vehicles

ISO 2315:1980 (reconfirmed)

ISO 8056-1:1985 (reconfirmed)

ISO 11893:2011

ISO 17566:2011

TC 23 Tractors and machinery for agriculture and forestry

ISO 11783-11:2011

ISO 11783-13:2011

TC 24 Particle characterization including sieving

ISO 13318-2:2007 (reconfirmed)

ISO 13319:2007 (reconfirmed)

ISO 13322-2:2006 (reconfirmed)

ISO 14488:2007 (reconfirmed)

ISO 14887:2000 (reconfirmed)

ISO 15901-2:2006 (reconfirmed)

TC 29 Small tools

ISO 3002-5:1989 (reconfirmed)

ISO 13399-1:2006 (reconfirmed)

ISO 297:1988 (reconfirmed)

ISO 1080:1975 (reconfirmed)

ISO 5415:2007 (reconfirmed)

ISO 7388-1:2007 (reconfirmed)

ISO 7388-2:2007 (reconfirmed)

ISO 8486-1:1996 (reconfirmed)

ISO 15635:2001 (reconfirmed)

ISO 16057:2002 (reconfirmed)

ISO 21948:2001 (reconfirmed)

ISO 21949:2001 (reconfirmed)

ISO 21950:2001 (reconfirmed)

ISO 21951:2001 (reconfirmed)

TC 33 Refractories

ISO 20182:2008 (reconfirmed)

ISO 21078-1:2008 (reconfirmed)

ISO 26845:2008 (reconfirmed)

TC 34 Food products

ISO 3720:2011

ISO 11287:2011

ISO 5510:1984 (reconfirmed)

ISO 6490-1:1985 (reconfirmed)

ISO 6493:2000 (reconfirmed)

ISO 6866:1985 (reconfirmed)

ISO 6867:2000 (reconfirmed)

ISO 7088:1981 (reconfirmed)

ISO 14181:2000 (reconfirmed)

ISO 14565:2000 (reconfirmed)

TC 38 Textiles

ISO 9073-9:2008 (reconfirmed)

ISO 9073-16:2007 (reconfirmed)

ISO 2:1973 (reconfirmed)

TC 41 Pulleys and belts (including veebelts)

ISO 22721:2007 (reconfirmed)

TC 43 Acoustics

ISO/TS 13473-4:2008

TC 44 Welding and allied processes

ISO 865:1981 (reconfirmed)

ISO 1089:1980 (reconfirmed)

ISO 5184:1979 (reconfirmed)

ISO 5828:2001 (reconfirmed)

ISO 5829:1984 (reconfirmed)

ISO 5830:1984 (reconfirmed)

ISO 6210-1:1991 (reconfirmed)

ISO 7286:1986 (reconfirmed)

ISO 7931:1985 (reconfirmed)

ISO 15609-5:2011

ISO 17654:2011

TC 45 Rubber and rubber products

ISO 188:2011

TC 60 Gears

ISO 54:1996 (reconfirmed)

ISO 678:1976 (reconfirmed)

ISO 21771:2007 (reconfirmed)

TC 61 Plastics

ISO 62:2008 (reconfirmed)

ISO 291:2008 (reconfirmed)

ISO 2578:1993 (reconfirmed)

ISO 10640:2011

ISO 16869:2008 (reconfirmed)

ISO 22196:2011

ISO 294-3:2002 (reconfirmed)

ISO 1209-1:2007 (reconfirmed)

ISO 8873-1:2006

ISO 8873-2:2007

ISO 20393:2007 (reconfirmed)

TC 83 Sports and other recreational facilities and equipment

ISO 7794:2011

ISO 10228:2011

TC 85 Nuclear energy, nuclear technologies, and radiological protection

ISO 11933-3:1998 (reconfirmed)

ISO 20785-2:2011

TC 89 Wood-based panels

ISO 12466-2:2007 (reconfirmed)

TC 91 Surface active agents

ISO 456:1973 (reconfirmed)

ISO 457:1983 (reconfirmed)

ISO 607:1980 (reconfirmed)

ISO 672:1978 (reconfirmed)

ISO 673:1981 (reconfirmed)

ISO 684:1974 (reconfirmed)

ISO 685:1975 (reconfirmed)

ISO 697:1981 (reconfirmed)

ISO 862:1984 (reconfirmed)

ISO 893:1989 (reconfirmed)

ISO 894:1977 (reconfirmed)

ISO 895:1977 (reconfirmed)

TC 94 Personal safety -- Protective clothing and equipment

ISO/TS 16976-7:2013

ISO/TS 16976-8:2013

TC 106 Dentistry

ISO 9917-1:2007 (reconfirmed)

ISO 10451:2010

TC 107 Metallic and other inorganic coatings

ISO 9588:2007 (reconfirmed)

TC 108 Mechanical vibration, shock and condition monitoring

ISO 5349-1:2001 (reconfirmed)

ISO 5349-2:2001 (reconfirmed)

ISO 9996:1996 (reconfirmed)

ISO 10227:1996 (reconfirmed)

ISO 13091-1:2001 (reconfirmed)

ISO 15230:2007 (reconfirmed)

ISO 18436-1:2012

TC 113 Hydrometry

ISO 3846:2008 (reconfirmed)

TC 118 Compressors and pneumatic tools, machines and equipment

ISO 28927-10:2011

TC 126 Tobacco and tobacco products

ISO/TS 7821:2005 (reconfirmed)

TC 127 Earth-moving machinery

ISO 3411:2007 (reconfirmed)

ISO 5353:1995 (reconfirmed)

ISO 11112:1995 (reconfirmed)

ISO 4510-1:1987 (reconfirmed)

ISO 6012:1997 (reconfirmed)

ISO 6302:1993 (reconfirmed)

ISO 7129:1997 (reconfirmed)

ISO 7852:1983 (reconfirmed)

ISO 8152:1984 (reconfirmed)

ISO 8925:1989 (reconfirmed)

ISO 9247:1990 (reconfirmed)

ISO 15143-1:2010

ISO/TS 15998-2:2012

ISO 22448:2010

TC 130 Graphic technology

ISO 12640-4:2011

TC 134 Fertilizers and soil conditioners

ISO 7837:1992 (reconfirmed)

TC 138 Plastics pipes, fittings and valves for the transport of fluids

ISO 18373-2:2008 (reconfirmed)

TC 145 Graphical symbols

ISO 3864-1:2011

TC 147 Water quality

ISO 5667-13:2011

ISO 5667-23:2011

TC 150 Implants for surgery

ISO 7206-1:2008 (reconfirmed)

ISO 7207-2:2011

ISO 5835:1991 (reconfirmed)

TC 156 Corrosion of metals and alloys

ISO 8565:2011

ISO 11846:1995 (reconfirmed)

TC 163 Thermal performance and energy use in the built environment

ISO 18292:2011

TC 164 Mechanical testing of metals

ISO 13314:2011

TC 172 Optics and photonics

ISO 9211-3:2008 (reconfirmed)

TC 184 Automation systems and integration

ISO/TS 10303-436:2006 (reconfirmed)

TC 190 Soil quality

ISO 11464:2006 (reconfirmed)

ISO 18287:2006 (reconfirmed)

ISO 22892:2006 (reconfirmed)

TC 201 Surface chemical analysis

ISO 28600:2011

TC 206 Fine ceramics

ISO 10677:2011

ISO 13124:2011

ISO 15490:2008 (reconfirmed)

TC 207 Environmental management

ISO 14040:2006 (reconfirmed)

ISO 14044:2006 (reconfirmed)

TC 209 Cleanrooms and associated controlled environments

ISO 14644-4:2001 (reconfirmed)

TC 211 Geographic information/Geomatics

ISO 19132:2007 (reconfirmed)

TC 213 Dimensional and geometrical product specifications and verification

ISO 8015:2011

ISO/TS 8062-2:2013

ISO 10360-7:2011

ISO 14253-2:2011

ISO 14253-3:2011

ISO 16610-21:2011

ISO/TS 17863:2013

ISO/TS 23165:2006 (reconfirmed)

TC 219 Floor coverings

ISO 10965:2011

TC 220 Cryogenic vessels

ISO 21011:2008 (reconfirmed)

ISO 21013-2:2007 (reconfirmed)

TC 221 Geosynthetics

ISO 10769:2011

ISO 10773:2011

TC 226 Materials for the production of primary aluminium

ISO 2828:1973 (reconfirmed)

ISO 2829:1973 (reconfirmed)

ISO 2830:1973 (reconfirmed)

ISO 2865:1973 (reconfirmed)

ISO 2927:1973 (reconfirmed)

ISO 6999:1983 (reconfirmed)

ISO 15906:2007 (reconfirmed)

ISO 21687:2007 (reconfirmed)

TC 256 Pigments, dyestuffs and extenders

ISO 3262-12:2001 (reconfirmed)

ISO 3262-22:2001 (reconfirmed)

TC 292 Security and resilience

ISO 28003:2007 (reconfirmed)

JTC 1 Information technology

ISO/IEC 16262:2011

ISO/IEC 10995:2011

ISO/IEC 12862:2011

ISO/IEC 7942-3:1999 (reconfirmed)

ISO/IEC 7942-4:1998 (reconfirmed)

ISO/IEC 8632-1:1999 (reconfirmed)

ISO/IEC 8632-3:1999 (reconfirmed)

ISO/IEC 8632-4:1999 (reconfirmed)

ISO 8651-1:1988 (reconfirmed)

ISO 8651-2:1988 (reconfirmed)

ISO 8651-3:1988 (reconfirmed)

ISO/IEC 8651-4:1995 (reconfirmed)

ISO 8805:1988 (reconfirmed)

ISO/IEC 9593-1:1990 (reconfirmed)

ISO/IEC 9593-3:1990 (reconfirmed)

ISO/IEC 9593-4:1991 (reconfirmed)

ISO/IEC 9636-1:1991 (reconfirmed)

ISO/IEC 9636-2:1991 (reconfirmed)

ISO/IEC 9636-3:1991 (reconfirmed)

ISO/IEC 9636-4:1991 (reconfirmed)

ISO/IEC 9636-5:1991 (reconfirmed)

ISO/IEC 9636-6:1991 (reconfirmed)

ISO/IEC 10641:1993 (reconfirmed)

ISO/IEC 12087-1:1995 (reconfirmed)

ISO/IEC 12087-3:1995 (reconfirmed)

ISO/IEC 12087-5:1998 (reconfirmed)

ISO/IEC 12088-4:1995 (reconfirmed)

ISO/IEC 14478-1:1998 (reconfirmed)

ISO/IEC 14478-2:1998 (reconfirmed)

ISO/IEC 14478-3:1998 (reconfirmed)

ISO/IEC 14478-4:1998 (reconfirmed)

ISO/IEC 14165-115:2006 (reconfirmed)

ISO/IEC 14165-131:2000 (reconfirmed)

ISO/IEC 14165-211:1999 (reconfirmed)

ISO/IEC 24702:2006 (reconfirmed)

ISO/IEC 18050:2006 (reconfirmed)

ISO/IEC 29103:2011

ISO/IEC TS 13249-7:2013

ISO/IEC 14957:2010

ISO/IEC 19502:2005 (reconfirmed)

ISO/IEC 19503:2005 (reconfirmed)

ISO/IEC 19756:2011

ISO/IEC 13066-1:2011

ISO/IEC 19788-2:2011

ISO/IEC 19784-4:2011

ISO/IEC 19795-1:2006 (reconfirmed)

ISO/IEC 19795-5:2011

ISO/IEC 19795-7:2011

ISO/IEC 24709-3:2011

ISO/IEC 29109-10:2010

Standards withdrawn

Period from 01 September to 30 September 2016

TC 22 Road vehicles

ISO 8820-7:2007 (replaced by )

TC 106 Dentistry

ISO/TR 11175:1993 (replaced by )

TC 184 Automation systems and integration

ISO/TS 8000-100:2009 (replaced by ISO 8000-100:2016)

ISO/TS 8000-120:2009 (replaced by ISO 8000-120:2016)

ISO/TS 8000-130:2009 (replaced by ISO 8000-130:2016)

ISO/TS 8000-140:2009 (replaced by ISO 8000-140:2016)

TC 208 Thermal turbines for industrial application (steam turbines, gas expansion turbines)

ISO 14661:2000/Amd 1:2002 (replaced by )

TC 211 Geographic information/Geomatics

ISO/TS 19104:2008 (replaced by ISO 19104:2016)