Wagner / Braun • 888.243.6914 • 414.214.0444 • FAX: 414.214.0450 • www.wagnercompanies.com
Kee Access® Galvanized Malleable Iron Slip-On Fittings www.shopwagner.com
210
BR
AC
KET
SW
ELD
FITT
ING
SEL
BO
WS
FLA
NG
ESSP
HER
ESC
APS
SLIP
-ON
FITT
ING
S
Revolutionary Connection System Under the terms of the Americans with Disabilities Act (ADA), private entities offering any public accommodations and services are required to comply with this law. The new Kee Access® ADA Handrail
System meets these requirements.Meets Codes and RegulationsThe ADA emphasizes handrail installation as individuals who are physically challenged use them to maintain balance, transfer weight, and prevent falls. ADA compliant handrail is the answer to a barrier free design. These safety railings are required in both new and existing buildings. To help builders, contractors and specifiers ensure that all commercial and public buildings satisfy this and other requirements of the ADA, Kee Industrial Products has introduced the Kee Access®
ADA Handrail System.
The system does not require any welding or threading so it is easily assembled without specialized workers or equipment. All of the components are galvanized for low, long-term maintenance and may be powder coated per your requirements.Ideal for creating new structures, this system can also be used as a retrofit solution. Existing railings can be updated to meet ADA requirements with the addition of the Add-On offset fittings KKA10-748 and KKA10-848. This makes the Kee Access® ADA Safety Railing readily achievable.Cost Effective AnswerThe Kee Access® ADA Safety Railing is a cost effective answer to ADA, ICC and Building Code requirements. Kee Industrial Products has a solution for every environment and situation. Especially well suited for accessible ramps and stairwells, the Kee Access® ADA Safety Railing is quality assured and can be used with absolute confidence. Refer to pages 265 to 266 for additional information regarding the ADA and accessibility.
KeeA
®
ccess
SINGLE HANDRAIL SOCKET – CAPPEDFor placement on top of a post for connection of one Post Mount Brackets KK518-7.
Pipe Size (A) B D E
GalvanizedMalleable Iron
11⁄2" stub 2.17" 3.35" KK10-840C
A
B E
D
90° SOLID ELBOWJoin to pipe using two Internal Couplings – KK514-7.
Pipe Size (A) D E
GalvanizedMalleable Iron
11⁄4" 3.15" 1.18" KK520-7
A
AE
D
ADD-ON SINGLE HANDRAIL SOCKETHinges around existing 11⁄4" or 11⁄2" pipe (1.66" and 1.90" OD respectively).
Pipe Size (A) B D E
GalvanizedMalleable Iron
11⁄4" stub 2.99" 2.09" KKA10-74811⁄2" stub 3.23" 2.17" KKA10-848
A
AB
D
E
A
B
A
B
F
D
E
TWIN HANDRAIL SOCKETFor placement mid post for connection of two Post Mount Brackets KK518-7.
Pipe Size (A) B D E F
GalvanizedMalleable Iron
11⁄2" stub 2.17" 3.35" 4.33" KK10-840
VARIABLE ANGLEJoin to pipe using two Internal Couplings – KK514-7.
Pipe Size (A) D
GalvanizedMalleable Iron
11⁄4" 4.27" KK554-7
AA
D
D
30 to200 degrees
A
AB
SINGLE HANDRAIL SOCKETFor placement mid post for connection of one Post Mount Brackets KK518-7.
Pipe Size (A) B D E
GalvanizedMalleable Iron
11⁄2" stub 2.17" 3.35" KK10-848
E
DB
A
B
F
D
E
TWIN HANDRAIL SOCKETFor placement on top of a post for con-nection of two Post Mount Brackets KK518-7.
Pipe Size (A) B D E F
GalvanizedMalleable Iron
11⁄2" stub 2.17" 3.35" 4.33" KK26-840C
A D
E
F
WALL MOUNTED END RETURNMount with 1⁄4" screws or bolts. Attach to pipe using KK514-7.
Pipe Size (A) D E E
GalvanizedMalleable Iron
11⁄4" 3.32" 3.39" 3.54" KK565-7
BA
E
F
D
END POST HANDRAIL RETURNJoin to pipe using one Internal Couplings – KK514-7. Return to post using Singleor Twin Handrail Socket. – KK10-848 or KK10-840.
Pipe Size (A) B D E F
GalvanizedMalleable Iron
11⁄2" socket 2.01" 3.39" 3.19" KK567-7
Wagner / Braun • 888.243.6914 • 414.214.0444 • FAX: 414.214.0450 • www.shopwagner.com 211
www.wagnercompanies.com Kee Access® Galvanized Malleable Iron Slip-On Fittings
BR
AC
KETS
WELD
FITTING
SELB
OW
SFLA
NG
ESSPH
ERES
CA
PSSLIP-O
NFITTIN
GS
Mike • Pipe
OPTIONAL GAP WASHERKK588-7
Jeff • Engineering
Brian • Tool & Die
A
E
D
A
WALL MOUNTED END RETURNFor attachment of end of handrail pipe into a wall. Attach using 1⁄4" screws or bolts.
Pipe Size (A) D E
GalvanizedMalleable Iron
11⁄4" 3.54 1.57 KK561-7
E
D
INTERNAL COUPLINGUse for splicing handrail pipe and elbows. The design and inset hex screw allows handrail to be smooth and continuous.
Pipe Size (A) D E
GalvanizedMalleable Iron
11⁄4" 2.93" 1.00" KK514-7
A
WALL MOUNT HANDRAIL BRACKETMount to wall using 1⁄4" screws or bolts.
Pipe Size (A) D E F G H
GalvanizedMalleable Iron
11⁄4" 3.46" 2.48" 3.23" 3.54" .98" KK570-7
E
D F
H
G
A
B
ATOP FIX RAIL ASSEMBLYSets on top of 11⁄2" pipe post (1.90" OD).
Pipe Size (A)
Pipe Size (B) D E
GalvanizedMalleable Iron
11⁄2" 11⁄4" .51" 3.50" KK555-8E
D
B
A
E
D
POST MOUNT HANDRAIL BRACKETAttach to Socket components on previous page.
Pipe Size (A) B D E
GalvanizedMalleable Iron
11⁄4" socket 2.01" 1.18" KK518-7
Wagner / Braun • 888.243.6914 • 414.214.0444 • FAX: 414.214.0450 • www.wagnercompanies.com
Kee Klamp® Galvanized Malleable Iron Slip-On Fittings www.shopwagner.com
212
BR
AC
KET
SW
ELD
FITT
ING
SEL
BO
WS
FLA
NG
ESSP
HER
ESC
APS
SLIP
-ON
FITT
ING
S
• Quick and easy way to assemble structural pipe systems
• Galvanized Malleable Iron• Reduce labor costs by 70%• 100% reusable• No welding or threading• No drilling or boltingKee Klamps® are strong, malleable iron, Slip-On Pipe Fittings with from one to five case-hardened set screws per fitting – depending on the number of pipes to be joined at one joint.For Slip-On Aluminum Fittings, turn to page 218.
SINGLE SOCKET TEEPipe
Size (a)Pipe
Size (b) d eMalleable
Iron1" 1" 1.81" 1.84" KK10-61" 3⁄4" 1.75" 1.42" KK10-65*1" 11⁄4" 2.20" 2.06" KK10-67*
11⁄4" 11⁄4" 2.38" 2.16" KK10-711⁄4" 3⁄4" 2.25" 1.44" KK10-75*11⁄4" 1" 2.25" 1.80" KK10-76*11⁄4" 11⁄2" 2.88" 2.38" KK10-78*11⁄2" 11⁄2" 2.69" 2.38" KK10-811⁄2" 11⁄4" 2.47" 2.03" KK10-87*2" 2" 3.31" 2.88" KK10-92" 11⁄2" 2.94" 2.50" KK10-98*
* Through connection and terminal connection are different pipe size.
b
d
e
d
90º ELBOWPipe Size d Malleable Iron
1" 1.81" KK15-611⁄4" 2.36" KK15-711⁄2" 2.67" KK15-82" 3.34" KK15-9
d
e
SPLIT SINGLE SOCKET TEEPipe Size d e
MalleableIron
11⁄4" 2.36" 1.10" KKA10-711⁄2" 3.46" 1.30" KKA10-8
Unique hinge and pin system enables existing structures to be easily extended without the need for dismantling.
d
f
e
45º SINGLE SOCKET TEEPipe Size d e f
MalleableIron
1" 1.73" 3.35" 1.38" KK12-611⁄4" 2.17" 3.70" 1.58" KK12-711⁄2" 2.36" 4.25" 1.58" KK12-8
d
CLAMP-ON TEEPipe Size d Malleable Iron
11⁄4" 2.68" KK16-711⁄2" 2.87" KK16-82" 3.54" KK16-9
A
B
e
d
CLAMP-ON CROSSOVERPipe
Size aPipe
Size b d eMalleable
Iron1" 1" 1.34" 1.89" KK17-6
11⁄4" 11⁄4" 1.69" 2.28" KK17-711⁄2" 11⁄2" 1.93" 2.56" KK17-82" 2" 2.40" 3.07" KK17-9
d
STRAIGHT COUPLINGPipe Size d Malleable Iron
1" 3.50" KK14-611⁄4" 4.01" KK14-711⁄2" 4.09" KK14-82" 4.88" KK14-9
d
INTERNAL COUPLINGPipe Size d e Malleable Iron
1" 2.99" .79" KK18-611⁄4" 2.99" .79" KK18-711⁄2" 3.74" .79" KK18-8
This coupling is not to be used as a load bearing joint.
d
e
ADJUSTABLE SIDE OUTLET TEEPipe Size d e
MalleableIron
1" 2.28" 1.30" KK19-611⁄4" 2.87" 1.57" KK19-711⁄2" 3.54" 2.17" KK19-811⁄2" 2.87" 1.77" KK19-85*2" 4.33" 1.93" KK19-9
* Connects 11⁄2" to 3⁄4" pipe
Mike • Bending
a
90º SIDE OUTLET TEEPipe Size d e
MalleableIron
11⁄2" 3.46" 2.36" KKA26-8For adding to or modifying existing struc-tures.
Wagner / Braun • 888.243.6914 • 414.214.0444 • FAX: 414.214.0450 • www.shopwagner.com 213
www.wagnercompanies.com Kee Klamp® Galvanized Malleable Iron Slip-On Fittings
BR
AC
KETS
WELD
FITTING
SELB
OW
SFLA
NG
ESSPH
ERES
CA
PSSLIP-O
NFITTIN
GS
3⁄4" Pipe = 1.050" Diameter1" Pipe = 1.315" Diameter11⁄4" Pipe = 1.660" Diameter11⁄2" Pipe = 1.900" Diameter2" Pipe = 2.375" Diameter
These fittings can support an axial load of 2000 lbs per set screw with the set screw tightened to a torque of 29 lbs/ft. This is normally obtained when the screw is fully tightened using a ratchet wrench.
d
e
d
SIDE OUTLET ELBOWPipe Size d Malleable Iron
1" 1.81" KK20-611⁄4" 2.36" KK20-711⁄2" 2.68" KK20-82" 3.35" KK20-9
d
90º SIDE OUTLET TEEPipe Size d Malleable Iron
1" 1.81" KK21-611⁄4" 2.36" KK21-711⁄2" 2.68" KK21-82" 3.35" KK21-9
e
d
90º THREE SOCKET TEEPipe Size d e Malleable Iron
1" 1.81" 3.62" KK25-611⁄4" 2.36" 4.72" KK25-711⁄2" 2.68" 5.35" KK25-82" 3.35" 6.61" KK25-9
For use when splicing pipe within the tee.
d
TWO SOCKET CROSSPipe Size d Malleable Iron
1" 3.62" KK26-611⁄4" 4.72" KK26-711⁄2" 5.35" KK26-82" 6.61" KK26-9 Don • Sales
e
d
30º TO 60º SINGLE SOCKET TEEPipe Size d e Malleable Iron
1" 3.23" 2.52" KK29-611⁄4" 3.66" 2.91" KK29-711⁄2" 4.02" 2.68" KK29-8
d
ADJUSTABLE CROSSPipe Size d
MalleableIron
1" 5.75" KK30-611⁄4" 7.01" KK30-711⁄2" 8.50" KK30-8
KK30 is adjustable between 30º and 45º from the horizontal.
d
e
SIDE OUTLET TEEPipe Size d e Malleable Iron
3⁄4" 1.61" 3.23" KK35-51" 1.81" 3.62" KK35-6
11⁄4" 2.36" 4.72" KK35-711⁄2" 2.68" 5.35" KK35-82" 3.35" 6.61" KK35-9
All metals have a recycled content and high reclamation rate. Contact Wagner for data relating to your specific product selections.
Wagner / Braun • 888.243.6914 • 414.214.0444 • FAX: 414.214.0450 • www.wagnercompanies.com
Kee Klamp® Galvanized Malleable Iron Slip-On Fittings www.shopwagner.com
214
BR
AC
KET
SW
ELD
FITT
ING
SEL
BO
WS
FLA
NG
ESSP
HER
ESC
APS
SLIP
-ON
FITT
ING
S
CLIP WITH SLOTPipe Size
MalleableIron
11⁄2" KKP57-8For attachment of panels and flooring to pipe structures.
FEMALE SINGLE SWIVELSOCKET MEMBER
Pipe Size d e bolt hole
MalleableIron
3⁄4" 2.36" .98" .39" KKF50-51" 2.36" .98" .39" KKF50-6
11⁄4" 2.68" .98" .39" KKF50-711⁄2" 2.99" .98" .39" KKF50-82" 3.35" 1.02" .39" KKF50-9
3⁄4" Pipe = 1.050" Diameter1" Pipe = 1.315" Diameter11⁄4" Pipe = 1.660" Diameter11⁄2" Pipe = 1.900" Diameter2" Pipe = 2.375" Diameter
d
e
a
b
d
e
CROSSOVERPipe
Size (a)Pipe
Size (b) d eMalleable
Iron3⁄4" 3⁄4" 1.34" 1.22" KK45-51" 1" 1.57" 1.50" KK45-61" 1" 1.42" 1.69" KK45-65*
11⁄4" 11⁄4" 2.13" 1.81" KK45-711⁄4" 11⁄4" 1.77" 1.81" KK45-76*11⁄2" 11⁄2" 2.17" 2.01" KK45-811⁄2" 11⁄2" 1.89" 2.00" KK45-86*11⁄2" 11⁄2" 2.01" 2.00" KK45-87*2" 2" 2.64" 2.40" KK45-92" 2" 2.36" 2.99" KK45-98*
* Through connection and terminal connection are different pipe size.
e
d
SPLIT CROSSOVERPipe Size d e Malleable Iron
11⁄4" 1.93" 1.81" KKA45-711⁄2" 2.17" 1.96" KKA45-8
Unique hinge and pin system enables existing structures to be easily extended without the need for dismantling.
SINGLE SWIVEL SOCKETPipe Size Pin Size Malleable Iron
1" 3⁄8" KKC50-6611⁄4" 3⁄8" KKC50-7711⁄2" 3⁄8" KKC50-882" 3⁄8" KKC50-99
DOUBLE SWIVEL SOCKETPipe Size Malleable Iron
1" KKC51-66611⁄4" KKC51-77711⁄2" KKC51-8882" KKC51-999
ed
f
ACUTE ANGLE ELBOWPipe Size d e f
MalleableIron
11⁄2" 5.28" 4.41" 4.41 KK56-840 to 70º
e
OBTUSE ANGLE ELBOWPipe Size e Malleable Iron
1" 4.57" KK55-611⁄4" 6.06" KK55-711⁄2" 6.02" KK55-8
125º to 178º
MALE SINGLE HORIZONTAL SWIVEL SOCKET MEMBER
Pipe Size hole dia. Malleable Iron1" 0.39" KKMH50-6
MALE SINGLE HORIZONTAL SWIVEL DOUBLE SOCKET MEMBER
Pipe Size hole dia. Malleable Iron1" 0.39" KKMH51-6
All metals have a recycled content and high reclamation rate. Contact Wagner for data relating to your specific product selections.
Wagner / Braun • 888.243.6914 • 414.214.0444 • FAX: 414.214.0450 • www.shopwagner.com 215
www.wagnercompanies.com Kee Klamp® Galvanized Malleable Iron Slip-On Fittings
BR
AC
KETS
WELD
FITTING
SELB
OW
SFLA
NG
ESSPH
ERES
CA
PSSLIP-O
NFITTIN
GS
dh
f
g
eSTANDARD RAILING FLANGE
Pipe Size d e f g h hole dia. Malleable Iron1" 2.99" 5.04" 3.50" 3.50" 0.31" 0.55" KK62-6
11⁄4" 2.99" 5.51" 3.54" 4.02" 0.43" 0.55" KK62-711⁄2" 3.34" 6.10" 3.50" 4.53" 0.39" 0.55" KK62-82" 4.02" 6.50" 5.00" 5.00" 0.39" 0.71" KK62-9
EXTRA HEAVY FLANGEPipe Size Base Diam. Height
MalleableIron
1" 5.51" 2.52" KK60-611⁄4" 5.87" 2.52" KK60-711⁄2" 6.18" 2.52" KK60-8
For use on structures where the fixing required is positional only – not structural.
FLANGEPipe Size Base Diam. Height
MalleableIron
1" 3.54" 1.93" KK61-611⁄4" 4.02" 2.01" KK61-711⁄2" 4.53" 2.32" KK61-82" 5.00" 2.48" KK61-9
For use on structures where the fixing required is positional only – not structural.
SWIVEL FLANGEPipe Size Malleable Iron
3⁄4" KKC58-51" KKC58-6
11⁄4" KKC58-711⁄2" KKC58-82" KKC58-9
GROUND SOCKETPipe Size d e f g
MalleableIron
1" 5.00" 4.84" 0.43" 4.53" KK66-611⁄4" 5.51" 5.35" 0.43" 5.00" KK66-711⁄2" 5.51" 5.35" 0.43" 5.00" KK66-8
For use when uprights are required to be removable.
j h
g
d
e
VERTICAL RAILING BASEPipe Size d e g h j Hole Diameter Malleable Iron
1" 4.26" 3.74" 2.64" 2.24" 1.77" 0.55" KK64-611⁄4" 4.49" 4.25" 2.83" 2.56" 2.01" 0.55" KK64-711⁄2" 4.77" 4.76" 3.50" 2.76" 2.20" 0.55" KK64-8
For fascia mounting posts.
HORIZONTAL BASEPipe Size Hole Diameter Malleable Iron
1" 0.55" KK65-6
ANGLE FLANGEPipe Size Hole diameter. Malleable Iron
11⁄2" 0.55" KK67-8For ramps where angle from vertical is between 3 and 11º.
e g
f
d
k
f
e
h
j
FASCIA FLANGEPipe Size e f h j k Hole Diameter Malleable Iron
1" 1.77" 3.03" 0.94" 3.75" 4.06" 0.43" KK68-611⁄4" 2.09" 3.27" 1.10" 4.19" 4.25" 0.43" KK68-711⁄2" 2.36" 3.50" 1.22" 4.44" 4.56" 0.43" KK68-8
For fascia mounting posts.
Wagner / Braun • 888.243.6914 • 414.214.0444 • FAX: 414.214.0450 • www.wagnercompanies.com
Kee Klamp® Galvanized Malleable Iron Slip-On Fittings www.shopwagner.com
216
BR
AC
KET
SW
ELD
FITT
ING
SEL
BO
WS
FLA
NG
ESSP
HER
ESC
APS
SLIP
-ON
FITT
ING
S
SINGLE SIDED CLIPPipe Size
MalleableIron
1" KK81-611⁄4" KK81-711⁄2" KK81-82" KK81-9
For attaching wire mesh infill. Hex head fixing bolts are supplied.
PGR THREE SOCKET TEEPipe Size
MalleableIron
11⁄2" KKP90-8
PGR TWO SOCKET CROSSPipe Size
MalleableIron
11⁄2" KKP91-8
PGR ELBOWPipe Size
MalleableIron
11⁄2" KKP92-8
PEDESTRIAN GUARDRAIL TEEPipe Size
MalleableIron
11⁄2" KKP99-8
DOUBLE SIDED CLIPPipe Size
MalleableIron
1" KK82-611⁄4" KK82-711⁄2" KK82-82" KK82-9
For attaching wire mesh infill. Hex head fixing bolts are supplied.
3⁄4" Pipe = 1.050" Diameter1" Pipe = 1.315" Diameter11⁄4" Pipe = 1.660" Diameter11⁄2" Pipe = 1.900" Diameter2" Pipe = 2.375" Diameter
ANGLE TEEPipe Size
MalleableIron
11⁄2" KK88-8For use when splicing pipe within the tee on a slope of up to 11º.
ANGLE TEEPipe Size
MalleableIron
11⁄2" KK86-8Used to join the middle rail to an end upright on a slope of up to 11º.
TWO SOCKET ANGLE CROSSPipe Size
MalleableIron
11⁄2" KK89-8Use to join the middle rail to an intermediate post on a slope of up to 11º.
FLANGE WITH TOEBOARD ADAPTER
Pipe Size
MalleableIron
11⁄4" KK69-711⁄2" KK69-8
Allows attachment of a kick plate to the base.
RAIL SUPPORTPipe Size
MalleableIron
1" KK70-611⁄4" KK70-711⁄2" KK70-8
Wagner / Braun • 888.243.6914 • 414.214.0444 • FAX: 414.214.0450 • www.shopwagner.com 217
www.wagnercompanies.com Kee Klamp® Galvanized Malleable Iron Slip-On Fittings
BR
AC
KETS
WELD
FITTING
SELB
OW
SFLA
NG
ESSPH
ERES
CA
PSSLIP-O
NFITTIN
GS
Kee Klamp® fittings can support an axial load of 2000 lbs per set screw with the set screw tightened to a torque of 29 lbs/ft. This is normally obtained when the screw is fully tightened using a ratchet wrench. Complete technical data may be viewed at www.wagnercompanies.com.
Allowable Pipe Loads This table is based on calculations using a working-bending stress of 27,000 psi which is approximately the ultimate in pipe load capacity for schedule 40, standard steel pipe.For your own industrial safety and the satisfactory performance of your pipe structure over the years, we suggest you load your pipe structure with 75 - 80% of the loads shown in the chart. The loaded pipe structure will then more closely conform to The American Institute of Steel Construction Building Code. This will allow for variations in the working/bending stresses of standard iron pipe supplied by various sources. Standard pipe simple beams with fixed ends carry substantial, uniformly distributed loads. This also applies to loads concentrated at the center of the pipe span and are approximately half of the uniformly distributed loads shown here.
The figures are for pairs of pipe spans per single opening between fittings on which a pallet load would rest.
View Kee-Klamp® installation instructions atwww.wagnercompanies.com
Angle Elbow
Angle Tee
Angle Tee
Angle CrossAngle Flange
RAMP RAIL FITTINGS
HEX HEAD RATCHETPipe Size
Fits All Sizes KK983⁄4", 1", 11⁄4",11⁄2" and 2"
ZINC PLATED SET SCREWS
Pipe Size
3⁄4" and 1" KK97-611⁄4", 11⁄2" and 2" KK97-7
British Threads
PLASTIC SET SCREW CAPS
Pipe Size3⁄4" KK100-51" KK100-6
11⁄4" KK100-711⁄2" KK100-82" KK100-9
Insert into set screws.
HEX HEAD KEYPipe Size
3⁄4" and 1" KK99-611⁄4", 11⁄2" and 2" KK99-7
Uniformly Distributed Loads in Pounds
Span1⁄2" Pipe.84" OD
3⁄4" Pipe1.05" OD
1" Pipe1.32" OD
11⁄4" Pipe1.66" OD
11⁄2" Pipe1.90" OD
2" Pipe2.38" OD
12" 2,190 3,800 7,170 12,660 19,440 30,24018" 1,460 2,560 4,780 8,440 12,960 20,00024" 1,100 1,900 3,580 6,320 9,720 15,12030" 880 1,520 2,860 5,060 7,760 12,10036" 730 1,260 2,390 4,220 6,480 10,08048" 550 950 1,790 3,160 4,860 7,56060" 440 760 1,430 2,520 3,880 6,05066" 400 680 1,300 2,300 3,520 5,50072" 360 620 1,190 2,100 3,240 5,00084" 310 540 1,020 1,810 2,760 4,32090" 290 500 940 1,640 2,580 4,00096" 270 460 890 1,580 2,420 3,780
108" 240 420 790 1,400 2,160 3,360120" 220 380 710 1,260 1,940 3,020
Wagner / Braun • 888.243.6914 • 414.214.0444 • FAX: 414.214.0450 • www.wagnercompanies.com
Speed Rail® Aluminum Slip-On Fittings www.shopwagner.com
218
BR
AC
KET
SW
ELD
FITT
ING
SEL
BO
WS
FLA
NG
ESSP
HER
ESC
APS
SLIP
-ON
FITT
ING
S
• Aluminum Alloy 535: Most Corrosive Resistant Aluminum Alloy Available
• High Strength, As Cast• Bright Attractive Finish• Conforms to ASTM B26 and B179• Set Screw Features Proprietary Internal/External Knurl
Cup Point• Tremendous Resistance To Loosening Due to Vibration• Full Contact of Point Greatly Resists Pull-Out and
Rotational SlipAll fittings are available in an optional anodized finish and with stainless steel (304) set screws. Contact Wagner for pricing.For additional Slip-On Aluminum fittings, refer to page 224.
TEEPipe Size a b c d e
Alloy 535Aluminum
3⁄4" 11⁄16" 11⁄2" 211⁄32" 11⁄4" 2" SR5-51" 111⁄32" 125⁄32" 227⁄32" 1" 23⁄8" SR5-6
11⁄4" 111⁄16" 2" 31⁄4" 7⁄8" 23⁄4" SR5-711⁄2" 115⁄16" 25⁄16" 323⁄32" 1" 33⁄8" SR5-82" 213⁄32" 3" 421⁄32" 11⁄4" 37⁄8" 0SR5-9
e
c a
d
a
b
#3 Elbow
PIPE SIZE2"
112"114"
A B C D E F2.40
1.93
1.68 2.00
2.32
3.00
3.22
3.72
4.64
0.88
1.00
1.25
ENGLISH UNITS (Inches)G G
METRIC UNITS (mm)
32
25
22
118
94
82
76
59
5143
49
61
FEDCBA
114"112"2"
PIPE SIZE
SCALE: HALF
1" 34 45 72 180.722.821.781.321"3 4" 1.07 1.50 2.34 0.60 155938273 4"
cb
d
a
dc
#3 Elbow
PIPE SIZE2"
112"114"
A B C D E F2.40
1.93
1.68 2.00
2.32
3.00
3.22
3.72
4.64
0.88
1.00
1.25
ENGLISH UNITS (Inches)G G
METRIC UNITS (mm)
32
25
22
118
94
82
76
59
5143
49
61
FEDCBA
114"112"2"
PIPE SIZE
SCALE: HALF
1" 34 45 72 180.722.821.781.321"3 4" 1.07 1.50 2.34 0.60 155938273 4"
b
a
ELBOWPipe Size a b c d
Alloy 535Aluminum
3⁄4" 11⁄16" 11⁄2" 211⁄32" 5⁄8" SR3-51" 111⁄32" 125⁄32" 213⁄16" 23⁄32" SR3-6
11⁄4" 111⁄16" 2" 31⁄4" 7⁄8" SR3-711⁄2" 115⁄16" 211⁄32" 323⁄32" 1" SR3-82" 213⁄32" 3" 421⁄32" 11⁄4" SR3-9
b
e
a
c
a
df
EXTENDED BARREL TEEPipe Size a b c d e f
Alloy 535Aluminum
11⁄2" 115⁄16" 315⁄16" 47⁄16" 13⁄32" 213⁄32" 111⁄32" SR5EXT-8
SIDE RIB TEEPipe Size a b c d e
Alloy 535Aluminum
2" 213⁄32" 3" 47⁄16" 11⁄4" 37⁄8" SR5SR-9
a
b
e
dca
135°
aa
cb b
ADJUSTABLE ELBOWPipe Size a b c
Alloy 535Aluminum
11⁄4" 111⁄16" 313⁄16" 75⁄8" SR3AE-711⁄2" 115⁄16" 41⁄2" 9" SR3AE-8
All metals have a recycled content and high reclamation rate. Contact Wagner for data relating to your specific product selections.
CROSSPipe Size a b c d e
Alloy 535Aluminum
3⁄4" 11⁄16" 11⁄2" 2" 5⁄8" 3" SR7-51" 111⁄32" 125⁄32" 23⁄8" 23⁄32" 39⁄16" SR7-6
11⁄4" 111⁄16" 13⁄8" 23⁄4" 7⁄8" 4" SR7-711⁄2" 115⁄16" 111⁄16" 33⁄8" 1" 45⁄8" SR7-82" 213⁄32" 115⁄16" 37⁄8" 11⁄4" 6" SR7-9
b
a
e
c
a
d d
Wagner / Braun • 888.243.6914 • 414.214.0444 • FAX: 414.214.0450 • www.shopwagner.com 219
www.wagnercompanies.com Speed Rail® Aluminum Slip-On Fittings
BR
AC
KETS
WELD
FITTING
SELB
OW
SFLA
NG
ESSPH
ERES
CA
PSSLIP-O
NFITTIN
GS
SIDE OUTLET TEEPipe Size a d
Alloy 535Aluminum
11⁄4" 111⁄16" 7⁄8" SR11-711⁄2" 115⁄16" 1" SR11-82" 213⁄32" 11⁄4" SR11-9
a
a
d
d
e d
a
SIDE OUTLET TEEPipe Size a d e
Alloy 535Aluminum
1" 111⁄32" 3⁄4" 213⁄16" SR11E-611⁄4" 111⁄16" 7⁄8" 31⁄4" SR11E-711⁄2" 115⁄16" 1" 35⁄8" SR11E-8
OFFSET CROSSPipe Size a b c
Alloy 535Aluminum
3⁄4" 11⁄16" 13⁄16" 21⁄2" SR10-51" 111⁄32" 17⁄16" 31⁄2" SR10-6
11⁄4" 111⁄16" 125⁄32" 31⁄2" SR10-711⁄2" 115⁄16" 21⁄32" 31⁄2" SR10-82" 213⁄32" 21⁄2" 4" SR10-9
a
c
a
c
b
SIDE OUTLET CROSSPipe Size a b c d e
Alloy 535Aluminum
11⁄4" 111⁄16" 23⁄4" 4" 7⁄8" 31⁄4" SR13-711⁄2" 115⁄16" 33⁄8" 45⁄8" 1" 311⁄16" SR13-8
ed
b a
c
a
d d
CROSSPipe Size a c d e
Alloy 535Aluminum
11⁄4" 111⁄16" 21⁄16" 7⁄8" 4" SR7E-711⁄2" 115⁄16" 25⁄16" 1" 47⁄16" SR7E-8
e
a
dd
ca
bd
dc
a
a
a
ed
SIDE OUTLET ELBOWPipe Size a b c d e
Alloy 535Aluminum
1" 111⁄32" 221⁄32" 227⁄32" 23⁄32" 227⁄32" SR9-611⁄4" 111⁄16" 31⁄16" 31⁄4" 7⁄8" 31⁄4" SR9-711⁄2" 115⁄16" 31⁄2" 323⁄32" 1" 323⁄32" SR9-82" 213⁄32" 47⁄16" 421⁄32" 11⁄4" 421⁄32" SR9-9
ADJUSTABLE ELBOW OR TEE ASSEMBLYPipe Size a b c d
Alloy 535Aluminum
1" 111⁄32" 2" 15⁄8" 7⁄8" SR17-611⁄4" 111⁄16" 23⁄8" 21⁄16" 11⁄8" SR17-711⁄2" 115⁄16" 23⁄4" 21⁄4" 11⁄8" SR17-8
c
b
d
a
a
INTERNAL SPLICEPipe Size a b c d
Alloy 535Aluminum
11⁄2" 4" 19⁄16" 23⁄4" 5⁄8" SR7ES-82" 4" 2" 23⁄42" 5⁄8" SR7ES-9
a
d
b
c c
Wagner / Braun • 888.243.6914 • 414.214.0444 • FAX: 414.214.0450 • www.wagnercompanies.com
Speed Rail® Aluminum Slip-On Fittings www.shopwagner.com
220
BR
AC
KET
SW
ELD
FITT
ING
SEL
BO
WS
FLA
NG
ESSP
HER
ESC
APS
SLIP
-ON
FITT
ING
S
Pipe Size a b c d e f
Alloy 535Aluminum
11⁄2" 115⁄16" 211⁄32" 323⁄32" 1" 43⁄4" 11⁄16" SR17MA-8
d
ab
e cf
a a
d
c cb
ADJUSTABLE ELBOW 180ºPipe Size a b c d
Alloy 535Aluminum
3⁄4" 11⁄16" 21⁄2" 227⁄32" 63⁄8" SR17A-51" 111⁄32" 21⁄2" 221⁄32" 61⁄2" SR17A-6
11⁄4" 111⁄16" 21⁄2" 2" 713⁄16" SR17A-711⁄2" 115⁄16" 21⁄2" 227⁄32" 83⁄16" SR17A-8
d
c
ADJUSTABLE ELBOW OR TEE-E MALE BODYPipe Size a b c d e
Alloy 535Aluminum
11⁄4" 111⁄16" 11⁄2" 21⁄16" 15⁄32" 329⁄32" SR17EM-711⁄2" 115⁄16" 11⁄2" 21⁄4" 15⁄32" 43⁄16" SR17EM-8
b
a
e
b
ed
a
ADJUSTABLE ELBOW OR TEE FEMALE BODYPipe Size a b d e
Alloy 535Aluminum
3⁄4" 11⁄16" 113⁄32" 13⁄32" 13⁄32" SR17F-51" 111⁄32" 125⁄32" 13⁄16" 17⁄32" SR17F-6
11⁄4" 111⁄16" 21⁄8" 11⁄8" 17⁄16" SR17F-711⁄2" 115⁄16" 213⁄32" 11⁄8" 13⁄4" SR17F-82" 213⁄32" 27⁄8" 11⁄8" 21⁄8" SR17F-9
b
d
c
a
ADJUSTABLE ELBOW OR TEE MALE BODYPipe Size a b c d
Alloy 535Aluminum
3⁄4" 11⁄16" 2" 13⁄8" 15⁄32" SR17M-51" 111⁄32" 2" 15⁄8" 15⁄32" SR17M-6
11⁄4" 111⁄16" 23⁄8" 21⁄16" 15⁄32" SR17M-711⁄2" 115⁄16" 23⁄4" 21⁄4" 15⁄32" SR17M-82" 213⁄32" 37⁄8" 25⁄8" 17⁄32" SR17M-9
a
b
e
d
c
ADJUSTABLE ELBOW OR TEE MALE/OVAL SLOTPipe Size a b c d e
Alloy 535Aluminum
11⁄2" 115⁄16" 11⁄2" 21⁄4" 15⁄32" 43⁄16" SR17EMO-8
NU-RAIL SWIVELPipe Size a b c d e
Alloy 535Aluminum
3⁄4" 11⁄16" 11⁄32" 31⁄2" 27⁄8" 23⁄16" SR30B-51" 111⁄32" 111⁄32" 31⁄2" 317⁄32" 211⁄16" SR30B-6
11⁄4" 111⁄16" 121⁄32" 31⁄2" 311⁄16" 211⁄16" SR30B-711⁄2" 115⁄16" 129⁄32" 31⁄2" 43⁄16" 31⁄16" SR30B-82" 213⁄32" 23⁄8" 4" 45⁄8" 31⁄4" SR30B-9
ced
b a
NU-RAIL ADJUSTABLE SWIVELPipe Size a b c d e
Alloy 535Aluminum
11⁄4" 111⁄16" 21⁄8" 37⁄8" 111⁄32" 17⁄16" SR30C-711⁄2" 115⁄16" 27⁄16" 43⁄8" 11⁄2" 15⁄8" SR30C-82" 213⁄32" 215⁄16" 431⁄32" 13⁄4" 13⁄4" SR30C-9
b a
e dc
Wagner / Braun • 888.243.6914 • 414.214.0444 • FAX: 414.214.0450 • www.shopwagner.com 221
www.wagnercompanies.com Speed Rail® Aluminum Slip-On Fittings
BR
AC
KETS
WELD
FITTING
SELB
OW
SFLA
NG
ESSPH
ERES
CA
PSSLIP-O
NFITTIN
GS
Sue • Sales Mel • Tool & Die Jackie • Production Control
ADJUSTABLE FLANGEPipe Size
Alloy 535Aluminum
3⁄4" SR41-51" SR41-6
11⁄4" SR41-711⁄2" SR41-8
TRIANGULAR FLANGEPipe Size Height Base Size
MountingHole
Alloy 535Aluminum
3⁄4" 11⁄2" 21⁄2" × 11⁄2" 5⁄16" SR40-51" 13⁄4" 33⁄16" × 13⁄4" 5⁄16" SR40-6
11⁄4" 13⁄4" 37⁄8" × 31⁄2" 7⁄16" SR40-711⁄2" 21⁄2" 43⁄16" × 313⁄16" 7⁄16" SR40-8
SQUARE FLOOR FLANGEPipe Size Height Base Size
MountingHole
Alloy 535Aluminum
3⁄4" 11⁄2" 25⁄8" × 25⁄8" 5⁄16" SR45-51" 113⁄16" 3" × 3" 5⁄16" SR45-6
11⁄4" 23⁄16" 33⁄8" × 33⁄8" 7⁄16" SR45-711⁄2" 21⁄2" 35⁄8" × 35⁄8" 7⁄16" SR45-8
ROUND FLANGE BASEPipe Size Height
Base Diameter
MountingHole
Alloy 535Aluminum
11⁄4" 21⁄4" 41⁄2" 7⁄16" SR42-711⁄2" 25⁄16" 41⁄2" 7⁄16" SR42-8
ROUND WALL FLANGEPipe Size Height
Base Diameter
MountingHole
Alloy 535Aluminum
3⁄4" 13⁄4" 3" 1⁄2" × 1" SR43-51" 21⁄8" 21⁄2" 1⁄2" × 1" SR43-6
11⁄4" 27⁄16" 31⁄2" 7⁄16" × 7⁄8" SR43-711⁄2" 29⁄16" 33⁄4" 7⁄16" SR43-8
FLANGE BASEPipe Size
Base Diameter
MountingHole Size
Alloy 535Aluminum
3⁄4" 27⁄8" 7⁄16" SR41M-51" 27⁄8" 7⁄16" SR41M-6
11⁄4" 33⁄8" 9⁄16" SR41M-711⁄2" 33⁄8" 9⁄16" SR41M-8
(Wall Only)
Wagner / Braun • 888.243.6914 • 414.214.0444 • FAX: 414.214.0450 • www.wagnercompanies.com
Speed Rail® Aluminum Slip-On Fittings www.shopwagner.com
222
BR
AC
KET
SW
ELD
FITT
ING
SEL
BO
WS
FLA
NG
ESSP
HER
ESC
APS
SLIP
-ON
FITT
ING
S
All metals have a recycled content and high reclamation rate. Contact Wagner for data relating to your specific product selections.
Roosevelt • Bending David • ShippingAl • Product Development
WALL MOUNT FLANGEPipe Size
Wall to Center Base Size
MountingHole
Alloy 535Aluminum
3⁄4" 1" 33⁄16" × 31⁄4" 5⁄16" SR50-51" 11⁄16" 33⁄4" × 37⁄8" 5⁄16" SR50-6
11⁄4" 11⁄4" 41⁄4" × 37⁄8" 7⁄16" SR50-711⁄2" 13⁄8" 47⁄16" × 41⁄2" 7⁄16" SR50-8
EXTRUDED WALL FLANGEPipe Size
Wall to Center Base Size
MountingHole
Alloy 535Aluminum
11⁄4" 13⁄8" 5" × 5" 7⁄16" SR52E-711⁄2" 13⁄8" 5" × 5" 7⁄16" SR52E-82" 15⁄8" 6" × 5" 9⁄16" SR52E-9
EXTRA HEAVY-DUTY WALL FLANGEPipe Size
Wall to Center Base Size
MountingHole
Alloy 535Aluminum
11⁄2" 15⁄8" 6" × 8" 5⁄8" × 13⁄8" SR52HD-8
SQUARE FLOOR FLANGEPipe Size Height Base Size
MountingHole
Alloy 535Aluminum
11⁄2" 3" 5" × 5" 7⁄16" SR45SBC-8
HEAVY-DUTYRECTANGULAR BASE FLANGEPipe Size Height Base Size
MountingHole
Alloy 535Aluminum
11⁄2" 31⁄2" 71⁄2" × 5" 9⁄16" SR48BC-8
Wagner / Braun • 888.243.6914 • 414.214.0444 • FAX: 414.214.0450 • www.shopwagner.com 223
www.wagnercompanies.com Speed Rail® Aluminum Slip-On Fittings
BR
AC
KETS
WELD
FITTING
SELB
OW
SFLA
NG
ESSPH
ERES
CA
PSSLIP-O
NFITTIN
GS
Wilfredo • Polishing
EXTERNAL COUPLINGPipe Size a b
Alloy 535Aluminum
1" 111⁄32" 31⁄2" SR70-611⁄4" 13⁄8" 31⁄2" SR70-711⁄2" 115⁄16" 31⁄2" SR70-82" 213⁄32" 41⁄16" SR70-9
a
b
END CAPPipe Size a b c
Alloy 535Aluminum
1" 19⁄16" 11⁄16" 11⁄32" SR60-611⁄4" 121⁄32" 113⁄32" 13⁄8" SR60-711⁄2" 23⁄16" 15⁄8" 15⁄8" SR60-82" 221⁄32" 23⁄32" 21⁄16" SR60-9
a
SIDE OUTLET CROSSPipe Size a b c d e
Alloy 535Aluminum
3⁄4" 11⁄16" 613⁄16" 231⁄32" 21⁄16" 17⁄16" SR104-51" 111⁄32" 55⁄8" 219⁄32" 113⁄16" 23⁄8" SR104-6
11⁄4" 111⁄16" 45⁄8" 21⁄8" 17⁄16" 23⁄8" SR104-711⁄2" 115⁄16" 37⁄16" 125⁄32" 13⁄16" 23⁄4" SR104-8
e
a
a
c db
PLATFORM BRACKETPipe Size a b c
Alloy 535Aluminum
11⁄2" 115⁄16" 3" 21⁄2" SR96-8
ba
c
OFFSET SUPPORT BRACKET
Pipe SizeAlloy 535Aluminum
11⁄4" SR55-711⁄2" SR55-8
Chad • Engineering
b c
Cha • Press
Wagner / Braun • 888.243.6914 • 414.214.0444 • FAX: 414.214.0450 • www.wagnercompanies.com
Aluminum Slip-On Pipe and OD Tube Fittings www.shopwagner.com
224
BR
AC
KET
SW
ELD
FITT
ING
SEL
BO
WS
FLA
NG
ESSP
HER
ESC
APS
SLIP
-ON
FITT
ING
S
a e
d
c
b
NoThreading
•No
Welding
Refer to pages 162 to 163 for Splice Locks and pages 142 to 151 for Brackets.• Denotes part shown in photograph.
Aluminum Slip-On Pipe and OD Tube FittingsSlip-On Pipe and Tubular Fittings for Railings, Racks and Other Assemblies.Build storage racks in half the time. Built in bracing assures you of the safest construction with smooth, rounded connections.
Slip fittings over pipe or OD tube to assemble railings, racks or other products. Fittings are easily secured with a set screw and do not require welding or threading.
Fittings are cast from aluminum alloy 535.2, ASTM B 26 with a tumbled finish. Set screws are plated steel. Type 304 stainless steel set screws – Part numbers 9538-2 and 9537– are available upon request. Bolts are zinc plated steel.
d
b
c
d
a
ECONOMY TEEPipe Size Tube OD a b c d Aluminum
3⁄4" 1.050" 11⁄2" 15⁄8" 25⁄16" 11⁄16" DA100-11" 1.315" 113⁄16" 23⁄8" 31⁄16" 15⁄16" DA100-2
11⁄4" 1.660" 21⁄4" 25⁄8" 35⁄8" 111⁄16" DA100-3•11⁄2" 1.900" 23⁄16" 213⁄16" 4" 115⁄16" DA100-4
d
bc
a
For use when splicing pipe within the tee.
JOINING TEEPipe Size Tube OD a b c d Aluminum
3⁄4" 1.050" 21⁄4" 25⁄16" 15⁄8" 11⁄16" DA102-11" 1.315" 23⁄4" 31⁄16" 23⁄8" 15⁄16" DA102-2
11⁄4" 1.660" 23⁄4" 35⁄8" 25⁄8" 111⁄16" DA102-3•11⁄2" 1.900" 3" 4" 213⁄16" 115⁄16" DA102-42" 2.375" 41⁄16" 5" 39⁄16" 27⁄16" DA102-5
db
a
a
c
ELBOWPipe Size Tube OD a b c d Aluminum
3⁄4" 1.050" 25⁄16" 25⁄32" 15⁄8" 11⁄16" DA105-11" 1.315" 3" 227⁄32" 23⁄16" 15⁄16" DA105-2
11⁄4" 1.660" 21⁄2" 311⁄32" 21⁄2" 111⁄16" DA105-3•11⁄2" 1.900" 315⁄16" 311⁄32" 213⁄16" 115⁄16" DA105-42" 2.375" 5" 427⁄32" 35⁄8" 27⁄16" DA105-5
SWIVEL TEEPipe Size Tube OD a b c d e Aluminum
11⁄4" 1.660" 27⁄8" 2" 45⁄8" 111⁄16" 15⁄8" DA101-3•11⁄2" 1.900" 27⁄8" 25⁄16" 53⁄16" 115⁄16" 17⁄8" DA101-4
ADJUSTABLE TEE OR BRACE FITTING(One DA125, One DA130)Pipe Size Tube OD Aluminum
3⁄4" 1.050" DA103-11" 1.315" DA103-2
11⁄4" 1.660" DA103-3•11⁄2" 1.900" DA103-4
ADJUSTABLE ELBOW(Two DA125)Pipe Size Tube OD Aluminum
3⁄4" 1.050" DA106-11" 1.315" DA106-2
11⁄4" 1.660" DA106-3•11⁄2" 1.900" DA106-4
d a
d
b
CROSSPipe Size Tube OD a b d Aluminum
3⁄4" 1.050" 11⁄2" 33⁄8" 11⁄16" DA110-11" 1.315" 17⁄8" 41⁄2" 15⁄16" DA110-2
11⁄4" 1.660" 21⁄4" 51⁄4" 111⁄16" DA110-3•11⁄2" 1.900" 29⁄16" 59⁄16" 115⁄16" DA110-42" 2.375" 39⁄16" 59⁄16" 27⁄16" DA110-5
Wagner / Braun • 888.243.6914 • 414.214.0444 • FAX: 414.214.0450 • www.shopwagner.com 225
www.wagnercompanies.com Aluminum Slip-On Pipe and OD Tube Fittings
BR
AC
KETS
WELD
FITTING
SELB
OW
SFLA
NG
ESSPH
ERES
CA
PSSLIP-O
NFITTIN
GS
d
d
c
d
a b
• Denotes part shown in photograph.
MODIFIED CROSSOVERPipe Size Tube OD a c d e Aluminum
11⁄4" 1.660" 4" 31⁄4" 111⁄16" 17⁄8" DA201-3•11⁄2" 1.900" 41⁄4" 39⁄16" 115⁄16" 2" DA201-4
ADJUSTABLE CROSS Patent # D188,526Pipe Size Tube OD a b c d Aluminum
3⁄4" 1.050" 11⁄2" 115⁄16" 111⁄16" 11⁄16" DA111-11" 1.315" 111⁄16" 21⁄4" 33⁄16" 15⁄16" DA111-2
11⁄4" 1.660" 21⁄8" 29⁄16" 311⁄16" 111⁄16" DA111-3•11⁄2" 1.900" 27⁄8" 213⁄16" 41⁄16" 115⁄16" DA111-4
cb
a
d Two piece assembly
c
d
a
ab
SIDE OUTLET TEEPipe Size Tube OD a b c d Aluminum
3⁄4" 1.050" 27⁄16" 13⁄8" 15⁄8" 11⁄16" DA115-11" 1.315" 33⁄16" 113⁄16" 21⁄4" 15⁄16" DA115-2
11⁄4" 1.660" 313⁄16" 23⁄16" 25⁄8" 111⁄16" DA115-3•11⁄2" 1.900" 11⁄16" 29⁄16" 23⁄4" 115⁄16" DA115-4
c
d
a b
CROSSOVERPipe Size Tube OD a b c d Aluminum
3⁄4" 1.050" 27⁄8" 21⁄4" 21⁄4" 11⁄16" DA200-11" 1.315" 23⁄4" 31⁄2" 23⁄4" 15⁄16" DA200-2
11⁄4" 1.660" 31⁄4" 43⁄16" 31⁄4" 111⁄16" DA200-3•11⁄2" 1.900" 31⁄2" 47⁄8" 31⁄2" 115⁄16" DA200-4
b c
da
CROSSOVERPipe Size Tube OD a b c d Aluminum
3⁄4" 1.050" 27⁄8" 21⁄4" 21⁄4" 11⁄16" DA200X-11" 1.315" 23⁄4" 31⁄2" 23⁄4" 15⁄16" DA200X-2
11⁄4" 1.660" 25⁄16" 43⁄16" 25⁄16" 111⁄16" DA200X-3•11⁄2" 1.900" 31⁄2" 47⁄8" 31⁄2" 115⁄16" DA200X-4
RACK KINGPipe Size Tube OD a b c d Aluminum
3⁄4" 1.050" 27⁄8" 27⁄8" 27⁄8" 11⁄16" DA300-11" 1.315" 35⁄8" 35⁄8" 35⁄8" 15⁄16" DA300-2
11⁄4" 1.660" 37⁄8" 37⁄8" 37⁄8" 111⁄16" DA300-3•11⁄2" 1.900" 43⁄4" 43⁄4" 43⁄4" 115⁄16" DA300-4
d c
ba
SIDE OUTLET CROSSPipe Size Tube OD a b c d Aluminum
3⁄4" 1.050" 37⁄16" 21⁄2" 23⁄8" 11⁄16" DA120-11" 1.315" 41⁄2" 3" 25⁄8" 15⁄16" DA120-2
11⁄4" 1.660" 55⁄16" 33⁄4" 23⁄4" 111⁄16" DA120-3•11⁄2" 1.900" 55⁄16" 33⁄4" 55⁄16" 115⁄16" DA120-4
SIDE OUTLET ELBOW WITH PLUGPipe Size Tube OD Aluminum
3⁄4" 1.050" DA115P-11" 1.315" DA115P-2
11⁄4" 1.660" DA115P-3•11⁄2" 1.900" DA115P-4
SWIVEL CROSS(One DA101, one DA201)Pipe Size Tube OD Aluminum
11⁄4" 1.660" DA250-3•11⁄2" 1.900" DA250-4
e
c
da
Wagner / Braun • 888.243.6914 • 414.214.0444 • FAX: 414.214.0450 • www.wagnercompanies.com
Aluminum Slip-On Pipe and OD Tube Fittings www.shopwagner.com
226
BR
AC
KET
SW
ELD
FITT
ING
SEL
BO
WS
FLA
NG
ESSP
HER
ESC
APS
SLIP
-ON
FITT
ING
S
• Denotes part shown in photograph. a
d
b
c
DOUBLE SWIVELPipe Size Tube OD a b c d Aluminum
11⁄4" 1.660" 21⁄4" 2" 57⁄8" 111⁄16" DA135-3•11⁄2" 1.900" 21⁄4" 21⁄8" 6" 115⁄16" DA135-4
ADJUSTABLE FLANGE(One DA125, One DA155)Pipe Size Tube OD Aluminum
3⁄4" 1.050" DA156-11" 1.315" DA156-2
11⁄4" 1.660" DA156-3•11⁄2" 1.900" DA156-4
LEAN-TO FLANGE(One DA155, One DA130)Pipe Size Tube OD Aluminum
11⁄4" 1.660" DA157-3•11⁄2" 1.900" DA157-4
COUPLING51⁄4" LongPipe Size Tube OD Aluminum
11⁄4" 1.660" DA510-3•11⁄2" 1.900" DA510-4
d c
a be
ADJUSTABLE FLANGE BASEPipe Size Tube OD a b c d e Aluminum
3⁄4" 1.050" 19⁄16" 11⁄2" 21⁄2" 111⁄16" 15⁄16" DA155-11" 1.315" 19⁄16" 11⁄2" 21⁄2" 111⁄16" 15⁄16" DA155-2
11⁄4" 1.660" 21⁄4" 21⁄2" 31⁄2" 25⁄8" 11⁄2" DA155-3•11⁄2" 1.900" 21⁄4" 21⁄2" 31⁄2" 25⁄8" 11⁄2" DA155-4
RAILING STEP ANDLANDING COMBINATION(Two DA125, One DA135)Pipe Size Tube OD Aluminum
3⁄4" 1.050" DA136-11" 1.315" DA136-2
11⁄4" 1.660" DA136-3•11⁄2" 1.900" DA136-4
RAILING DOWNTURN OR BRACE FITTING(Two DA125, One DA140)Pipe Size Tube OD Aluminum
3⁄4" 1.050" DA141-11" 1.315" DA141-2
11⁄4" 1.660" DA141-3•11⁄2" 1.900" DA141-4
d
e
b c
a
SOCKET SWIVELPipe Size Tube OD a b c d e Aluminum
3⁄4" 1.050" 15⁄16" 113⁄16" 21⁄2" 11⁄16" 1" DA125-11" 1.315" 15⁄8" 21⁄8" 25⁄8" 15⁄16" 11⁄4" DA125-2
11⁄4" 1.660" 2" 23⁄4" 33⁄4" 111⁄16" 15⁄8" DA125-3•11⁄2" 1.900" 21⁄4" 213⁄16" 33⁄4" 115⁄16" 15⁄8" DA125-4
a
d
b c
SWIVELPipe Size Tube OD a b c d Aluminum
3⁄4" 1.050" 13⁄8" 15⁄16" 29⁄16" 11⁄16" DA130-11" 1.315" 11⁄2" 11⁄2" 27⁄8" 15⁄16" DA130-2
11⁄4" 1.660" 21⁄4" 21⁄4" 4" 111⁄16" DA130-3•11⁄2" 1.900" 21⁄4" 21⁄4" 41⁄2" 115⁄16" DA130-4
d
b
c
ba
RIGHT ANGLE SWIVELPipe Size Tube OD a b c d Aluminum
3⁄4" 1.050" 13⁄8" 11⁄4" 29⁄16" 11⁄16" DA140-11" 1.315" 11⁄2" 11⁄2" 31⁄16" 15⁄16" DA140-2
11⁄4" 1.660" 23⁄16" 2" 315⁄16" 111⁄16" DA140-3•11⁄2" 1.900" 21⁄4" 21⁄4" 41⁄4" 115⁄16" DA140-4
Wagner / Braun • 888.243.6914 • 414.214.0444 • FAX: 414.214.0450 • www.shopwagner.com 227
www.wagnercompanies.com Aluminum Slip-On Pipe and OD Tube Fittings
BR
AC
KETS
WELD
FITTING
SELB
OW
SFLA
NG
ESSPH
ERES
CA
PSSLIP-O
NFITTIN
GS
d ae
g
fb
c
a
cb
• Denotes part shown in photograph.
RECTANGULAR BASE FLANGEPipe Size Tube OD a b c d e f g Aluminum
3⁄4" 1.050" 27⁄8" 15⁄8" 111⁄16" 11⁄16" 21⁄8" 11⁄16" 3⁄16" DA150S-11" 1.315" 21⁄8" 23⁄4" 21⁄16" 15⁄16" 17⁄16" 2" 1⁄4" DA150S-2
11⁄4" 1.660" 29⁄16" 31⁄4" 27⁄16" 111⁄16" 15⁄8" 25⁄16" 1⁄4" DA150S-3•11⁄2" 1.900" 31⁄16" 311⁄16" 211⁄16" 115⁄16" 2" 25⁄8" 5⁄16" DA150S-4
PLUGPipe Size Tube OD a b c Aluminum
3⁄4" 1.050" 13⁄16" 13⁄16" 1⁄2" DA500-11" 1.315" 11⁄2" 11⁄2" 1⁄2" DA500-2
11⁄4" 1.660" 17⁄8" 17⁄8" 3⁄4" DA500-3•11⁄2" 1.900" 21⁄16" 21⁄16" 3⁄4" DA500-4
Snap-In Plug for Tubing Also Available
d
f
c
gba
e
c d fe
a
ROUND BASE FLANGEPipe Size Tube OD a c d e f Aluminum
3⁄4" 1.050" 15⁄8" 11⁄16" 21⁄2" 3⁄16" 2" DA150R-11" 1.315" 21⁄16" 15⁄16" 31⁄8" 1⁄4" 23⁄8" DA150R-2
11⁄4" 1.660" 27⁄16" 111⁄16" 31⁄2" 1⁄46" 213⁄16" DA150R-3•11⁄2" 1.900" 211⁄16" 115⁄16" 4" 5⁄16" 31⁄4" DA150R-4
WALL FLANGEPipe Size Tube OD a b c d e f g Aluminum
1" 1.315" 31⁄2" 25⁄8" 33⁄8" 25⁄16" 5⁄16" 21⁄2" 11⁄16" DA160-211⁄4" 1.660" 311⁄16" 27⁄8" 35⁄8" 29⁄16" 3⁄8" 211⁄16" 13⁄16" DA160-3•11⁄2" 1.900" 43⁄8" 33⁄8" 37⁄8" 25⁄8" 3⁄8" 27⁄8" 15⁄16" DA160-4
HEX HEAD RATCHETPipe Size
Fits All Sizes KK983⁄4", 1", 11⁄4", 11⁄2" and 2"
IN-GROUND SOCKETFor Pools and Removable RailsThis heavy-duty cast socket for 11⁄2" pipe mounts flush with ground surface. A stainless steel locking bolt secures the post and resists corrosion. The railing is easily removed by loosening the lock bolt. Use heavy duty stainless cover flange for a neat looking installation. An electrical ground cover screw is furnished.
COVER FLANGEMill Finish
Pipe Size Tube OD Stainless11⁄2" 1.900" 2614
PERMA-SOCKETPipe Size Tube OD Depth Aluminum Brass
11⁄2" 1.900" 3" PS-3019•11⁄2" 1.900" 4" PS-4019 PS-4019B Mark • Sales