Just KissesDesigned by Darlene Zimmermanwww.feedsacklady.com
Featuring
PENNY’S DOLLHOUSE
For questions about this pattern, please email [email protected].
Finished quilt measures: 52” x 58
page 2
Fabric and Supplies Needed
Color Fabric Name/SKU Yardage
ADZ-17962-73 LAKE
ADZ-17962-140 SCREAMIN’ YELLOW
ADZ-17964-36 ALOE
ADZ-17964-73 LAKE
ADZ-17964-122 CAMELLIA
ADZ-17964-140 SCREAMIN’ YELLOW
ADZ-17965-36 ALOE
ADZ-17965-73 LAKE
ADZ-17965-121 LIPSTICK
ADZ-17959-287 SWEET
ADZ-17963-36 ALOE
ADZ-17963-121 LIPSTICK
ADZ-17963-82 BLUE JAY
ADZ-17966-73 LAKE
ADZ-17961-27 HIBISCUS
ADZ-17961-122 CAMELLIA
ADZ-17961-140 SCREAMIN’ YELLOW
ADZ-17962-36 ALOE
Color Fabric Name/SKU Yardage
Fabric amounts based on yardage that is 42” wide.
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
2/3 yard (one full panel)
1/4 yard
1/4 yard
3/8 yard
5/8 yard
1/8 yard
1/8 yard
1/8 yard
1/8 yard
1/8 yard
1/8 yard
1/8 yard
1/8 yard
1/8 yard
1/8 yard
1/8 yard
1/8 yard
1/8 yard
page 3
Copyright 2018, Robert KaufmanFor individual use only - Not for resale
You will also need:3-2/3 yards for backing
EZ Quilting Companion Angle RulerEZ Quilting Easy Angle Ruler
Color Fabric Name/SKU Yardage
ADZ-17966-122 CAMELLIA
ADZ-17966-146 MANGO
Color Fabric Name/SKU Yardage
Fabric amounts based on yardage that is 42” wide.
S
T
1/8 yard
1/8 yard
1/2 yardADZ-17962-82BLUE JAY
Binding
- Read through all of the instructions before beginning.- All of the seam allowances are 1/4” unless otherwise noted.- Press seam allowances open unless otherwise noted. - Width of fabric (WOF) is equal to at least 42” wide.- Right sides together has been abbreviated to RST.- Remember to measure twice and cut once!
[Fabric A will be cut to size during the quilt construction]
From each of Fabrics B and C, cut:two 3-1/2” x WOF strips. Subcut: fifteenCompanionAngletriangles
From Fabric D, cut:two 3-1/2” x WOF strips. Subcut: fifteenCompanionAngletrianglestwo 2” x WOF strips for the sashing
From Fabric E, cut:one 3-1/2” x WOF strip. Subcut: twelve Easy Angle triangles three Companion Angle trianglessix 2-1/2” x WOF strips for the outer border
Notes Before You Begin
Cutting Instructions
page 4
From each of Fabrics F-T, cut:one 3-1/2” x WOF strip. Subcut: twelve Easy Angle triangles three Companion Angle triangles From the Binding Fabric, cut:six 2-1/2” x WOF strips
Step 1 Each block has two large triangles, one light, one dark, and four contrasting small triangles. Choose the six units you need for each block and place on a paper plate. Repeat for 44 blocks. You will have some units left over to make a few additional blocks if you choose.
Block Assembly
(1) (1) (4)
Step 2 Sew a contrasting small triangle to the right edge of a large triangle. Repeat for the second half of the block. Finger-press toward the small triangle.
Step 3 Sew the remaining contrasting small triangles to the left edge of the units from Step 2. Finger-press toward the large triangle.Youshouldnowhavetwoflyinggeese units measuring 3-1/2” x 6-1/2”. Trim off points.
Step 4 SewthetwoflyinggeeseunitsfromStep3togethertomakea block. Press the center seam open. At this point the block should measure 6-1/2” square. Repeat for all forty-four blocks.
page 5
Step 1 Sew four blocks together in a row, alternating the direction of the light triangles as shown. Make two row units for the top and bottom of the quilt. Press the seams open.
Assembling the Quilt
Step 2 Sew seven blocks together in a vertical row for the left side of the quilt, alternating the direction of the light triangles as shown. Press the seams open.
Step 3 Sew a second vertical row of blocks for the outside edge of the left side of the quilt, alternating the direction of the blocks as shown. Press the seams open.
Step 4 Join the two vertical rows for the left side of the quilt. Press the seam open.
Step 5 Repeat Steps 2-4 to make the right side vertical rows.
page 6
This pattern may be used for personal purposes only and may not be reproduced in any form without the express permission from Robert Kaufman Fabrics. This pattern is not for resale. All patterns, unless otherwise attributed, are © Robert Kaufman Co., Inc. 2005-2018. All rights reserved.
Step 6 Measure the length of the vertical rows, and trim the panel and sashing strips to this length.
Step 7 Sew the two sashing strips to the sides of the panel. Press. Measure the width of the four block units made in Step 1. Trim the panel evenlytofitthetop and bottom borders.
Step 8 Sew the side block borders to the sides of the panel. Press toward the panel.
Step 9 Sew two blocks to the right and left side of the top and bottom borders, making sure the light triangles alternate. Press the seams open. Sew to the top and bottom of the quilt. Press toward the panel.
Step 10 Piece the blue print border strips as needed. Measure and trim two borders the width of the quilt. Sew to the top and bottom of the quilt. Press toward the borders.
Step 11 Repeat Step 10 for the side borders of the quilt.
Your quilt top is complete. Baste, quilt, bind and enjoy!