Redox in Magmatic Systems
Activities in Non-Ideal Solutions
Lecture 10
Line 5 has a slope of -1 and an intercept of log K.
We can also use pe-pH diagrams to illustrate stability of solid phases in presence of solution. In this case, we must choose concentration.
More about pe-pH diagrams
• pe-pH diagrams are a kind of stability or predominance diagram.
• They differ from phase diagrams because lines indicate not phase boundaries, but equal concentrations.o There is only 1 phase in this this
diagram – an aqueous solution.
• Regions are regions of predominance.o The aqueous species continue to
exist beyond their fields, but their concentrations drop off exponentially.
Environmental Interpretation of pe-
pH
Redox in Magmas
Oxygen Fugacity• Igneous geochemists use oxygen fugacity ƒO2
to
represent the redox state of the system. Hence, the oxidation of ferrous to ferric iron would be written as:
2FeO + O2(g) = Fe2O3
• For example, oxidation of magnetite to hematite:2Fe3O4+ ½O2(g) = 3Fe2O3
• (Actually, there isn’t much O2 gas in magmas. Reaction more likely mediated by water and hydrogen).
Redox in Magmatic Systems
• For magnetite-hematite• 2Fe3O4+ ½O2(g) = 3Fe2O3
• assuming the two are pure solids
• At a temperature such as 1000K
Oxygen Fugacity Buffers
• The log ƒO2 – T diagram is a
phase diagram illustrating boundaries of phase stability. The two phases coexist only at the line.
• Reactions such as magnetite-hematite (or iron-wüstite or fayalite-magnetite-quartz) are buffers.
• For example, if we bleed O2 into a magma containing magnetite, the ƒO2
cannot rise
above the line until all magnetite is converted to hematite (assuming equilibrium!)
Real Solutions:Minerals and Magmas
Chapter 4
We will cover Chapter 4 only through section 4.6
(page 144).You will not be responsible for the remaining material in
the chapter.
Power of Solutions• Our thermodynamics would be so much simpler if
all solutions behaved ideally! Even simpler if there were no solutions at all!
• But, once we learn how to handle them, we’ll see that we can use solution behavior to do some real geochemistry and learn things about the Earth.o Because the distribution of Mg and Fe between olivine and a magma
depends on temperature, we can use the observed distribution to determine magma temperatures.
o We can predict the temperature at which K- and Na-feldspar will exsolve and use this to determine metamorphic temperatures.
o We can actually predict the plagioclase-spinel peridotite phase transition
o We can determine equilibration temperatures of garnet peridotites.
In This Chapter• We’ll learn how to handle non-ideal solutions• Learn how to construct phase diagrams from
thermodynamic data• Learn how thermodynamics is used for
geothermometry and geobarometry• See how thermodynamics can be used to predict
the sequence of minerals precipitating from magma.
Non-Ideality• We found a useful approach to non-ideality in
electrolyte solutions (Debye-Hückel), but there are many other kinds of non-ideal solutions, including solids, liquid silicates, etc.
• Some substances undergo spontaneous exsolution (oil and water; K- and Na-feldspar; clino- and ortho-pyroxene; silicate and sulfide magmas). When that happens, we know the solution is quite non-ideal (ideal solutions should always be more stable than corresponding physical mixtures).
Margules Equations• When you need to fit an empirical function to an
observation and don’t fully understand the underlying phenomena, a power series is a good approach because it of its versatility.
• So, for example, we can express the excess volume of a solution (e.g., alcohol and water) as:
• where X2 is the mole fraction of component 2 and A, B, C, … are constants, Margules parameters, to be determined empirically (e.g., by curve fitting).
Symmetric Solutions• Let’s first look at some simple cases. One such case would
be where we need only the first and second order terms.• The excess volume (and other excesses) should be
entirely functions of mole fraction, so for a binary solution where X1 = 1 - X2, A= 0 and our equation should reduce to:
• The simplest such case would be symmetric about the midpoint X1 = X2.
• In that case,
• Substituting X1 = 1 – X2, we find that
B = -C
Interaction Parameters
• Let WV = B
• W is known as an interaction parameter (volume interaction parameter in this case) because non-ideal behavior results from interactions between dissimilar species.
• The interaction parameter is a function of T, P, and the nature of the solution, but not of X.
• We can define similar interaction parameters for free energy, enthalpy, and entropy.
or
Regular Solutions• Since ∆G = ∆H-T∆S• The free energy interaction parameter is:
WG = WH – TWS
• Regular solutions are the special case where WS = 0 and therefore WG
= WH and WG is independent of T.o what does this imply about ∆Sexcess?
Interaction Parameters and
Activity Coefficients• For a binary symmetric solution, λ1 must equal λ2 at
X1 = X2.
• From this we can derive:
• For X2 ≈ 1 (very dilute solution of X1), then
• and WG = RT ln h
• What happens when X1 ≈ 1?
Asymmetric Solutions• More complex
situation where expansion carried out to third order.
• Excess free energy given by:
• Activity coefficient:
Calculated Free Energy at 600˚C in the Orthoclase-Albite System as a function of Albite mole fraction.
Albite-OrthoclaseFree Energy at various T A 3-D version
G-bar–X and Exsolution
• We can use G-bar–X diagrams to predict when exsolution will occur.
• Our rule is the stable configuration is the one with the lowest free energy.
• A solution is stable so long as its free energy is lower than that of a physical mixture.
• Gets tricky because the phases in the mixture can be solutions themselves.
Inflection Points• At 800˚C, ∆Greal defines a
continuously concave upward path, while at lower temperatures, such as 600˚C (Figure 4.1), inflections occur and there is a region where ∆Greal is concave downward. All this suggests we can use calculus to predict exsolution.
• Inflection points occur when curves go from convex to concave (and visa versa).
• What property does a function have at these points?
• Second derivative is 0.Albite-Orthoclase
Inflection Points• Second derivative is:
• First term on r.h.s. is always positive (concave up).
• Inflection will occur when
Spinodal
Actual solubility gap can be less than predicted because an increase is free energy is required to begin the exsolution process.