F 47
www.torwegge-group.com
Roller tracks product overview
TORWEGGE roller tracks
Series Page
Special applications F 48
Roller U-rail F 50
Universal roller tracks F 52
Multi-directional wheel tracks F 56
Colli roller tracks F 58
Pallet roller tracks F 60
Groovy pallet roller tracks F 62
Ball transfer tracks F 64
Heavy-duty roller tracks F 65
Conveyor rollers F 66
Multi transfer system F 68
F 48
We put things in motion Product similar to illustrations!
Leav
ing
tech
nica
l cha
nges
!
Special applications
"We can do things differently!Pallet roller tracks with bends
Offset pallet roller tracks
Pallet roller tracks with side guide
US-NR 065/033US-NR 90/065
Pallet turning station
F 49
Product similar to illustrations! www.torwegge-group.com
Leav
ing
tech
nica
l cha
nges
!
Roller tracks
Heavy-duty roller tracks with ball bearings, offset
Pallet roller tracks with double-sided raised profiles
US-NR 04/075
US-NR 60/033
Solutions to your speci� cations!"
Double wheel flange
F 50
We put things in motion Product similar to illustrations!
Leav
ing
tech
nica
l cha
nges
!
Roller U-rail
Supplementary equipment for the rail: Axle and profile in stainless steel (/VA).
Only the axle in stainless steel (/AE).
Guide rails
End stops
Fastening clips
Return stop
Custom designs: High-conductivity rollers (HL black).
Cryogenic design from – 30°.
Heat-resistant steel rollers.
Roller type:Normal roller, yellow RU-33N Normal roller, black RU-33NDUNormal high-conductivity rollers RU-33NHLNormal flanged rollers, yellow RU-33SP miniNormal flanged rollers, high-conductivity RU-50SPHL
Rationalize, transport, automate
The main fields of application for U-profile and fixed roller tracks are found in:
Live storage shelving Guide rails for conveying systems. Wheel conveyors and wheel carpets
for interlinking two work stations. Packing tables and picking stations. Assembly aids, e.g., in the woodworking
and window fabrication industries. Supporting the rollers on steel axles guarantees a
high load-carrying capacity (6 daN kg) and a very low sliding friction resistance.
The torsion-resistant roller track profile is formed from bright galvanized steel sheet and has rounded edges. Section modulus 0.5 cm3. Rollers are interchangeable.
If a free dimension is to be located at the front and rear for the fixed roller track, then this measurement must be specified.
We must calculate a surcharge for this.
Roller U-rail
Roller: Made of thermoplastic synthetic material,
resistant to impact and fracture.
Resistant to acids and bases.
Does not absorb moisture. Normal rollers can be used in
temperature ranges from -30 °C to +100 °C.
NEW!NEW!
NEW!NEW!
F 51
Product similar to illustrations! www.torwegge-group.com
Leav
ing
tech
nica
l cha
nges
!
Roller U-rail
Roller U-rails – Mini / NormalThe rollers mounted on steel axles have a load-carrying capacity of 6 kg and are available as normal and flanged rollers. The roller track profile is bright galvanized steel sheet. Stainless steel design on request. Available in lengths up to max. 6000 mm.
Roller U-rail – SuperfixFor transporting heavy goods in rough daily operation. The rollers
mounted on steel axles have a load-carrying capacity of 12 kg and are available as normal and flanged rollers.
Stock lengths immediately available Length DesignIdent. No. Order No. mm0023598 RU-16N-MINIx2000 2000 yellow0026685 RU-16N-MINIx3000 3000 yellow
Roller U-rail – MiniOrder No. with normal rollersRU-16N-Mini x LenghtRU-33N-Mini x LenghtRU-50N-Mini x LenghtRU-33SP-Mini x LenghtRU-50SP-Mini x LenghtRU-66SP-Mini x Lenght
Stock lengths immediately available Length DesignIdent. No. Order No. mm0023611 RU-33Nx2000 2000 yellow0023613 RU-33Nx3000 3000 yellow
Roller U-rails – NormalOrder No. with normal rollersRU-33N x LenghtRU-50N x LenghtRU-66N x LenghtRU-100N x LenghtRU-50SP x LenghtRU-66SP x LenghtRU-100SP x Lenght
Mini – Normal accessoriesIdent. No. Order No.0026914 End stop RU-EG0026915 Connector RU-V0026916 Spring steel brake plate RU-BB0026917 Brake clip RU-BK0026918 Adjustable spring clip RU-VFKL0026919 Edge protection RU-KS0026920 Safety strut RU-SPS
Roller U-rail – SuperfixOrder No. with Superfix rollersSF-33N x LenghtSF-50N x LenghtSF-66N x LenghtSF-100N x LenghtSF-50SP x LenghtSF-66SP x LenghtSF-100SP x Lenght
Stock lengths immediately available Length DesignIdent. No. Order No. mm0010896 SF-33Nx2000 2000 yellow0010897 SF-33Nx3000 3000 yellow
Superfix accessoriesIdent. No. Order No.0026921 End stop SF-E0026922 Sliding end stop SF-SE0026923 Connector SF-V
F 52
20 mm
We put things in motion Product similar to illustrations!
Leav
ing
tech
nica
l cha
nges
!
Available as track carpet! (Reduced load-carrying capacity per roller)
Available with side guide!
Universal roller tracks
RU-13ST
RU-20ST
Roller dimensions Spacing Total width Installation height Max. length Load-carrying capacity
Ident. No. Order No. mm mm mm mm mm kg/roller
0036924 RU-13ST Ø 12 x 16 13 29 20 2000 30
0033318 RU-20ST Ø 19 x 24 20 46 31 2980 40
Roller U-rail(Mini heavy duty roller tracks)for high demands
Very narrow roller pitch Extremely low installation height Ball bearing-mounted rollers Light-running Heat-resistant up to 100°C
(without oil lubrication to 250°C) Rollers easily interchangeable! Mounting holes Ø 6.2 mm, spacing 100 mm
Application examples:
Welding shop Logistics center Hardening shop Metal Metal processing Press shop Production Robotics and much more.
Illustration corresponds to the original size RU-20ST
F 53
Product similar to illustrations! www.torwegge-group.com
Leav
ing
tech
nica
l cha
nges
!
Plain rollers, unless otherwise specified, are mounted in the lower row of holes.
Flanged rollers and rollers with thermoplastic rubber bindings are always mounted in the upper row. The first roller after 25 mm, running to the end of the rail.
Universal roller tracks
Universal roller tracksTORWEGGE universal roller tracks are used in all areas of conveying and storage technology:
Live storage shelving Guide rails Side deflectors Mounting rails for conveying systems Sliding rails in the glass industry
US-NR 05US-NR 08US-NR 10
US-NR 30 US-NR 07US-NR 20
US-NR 15 US-SR 10 US-SR 20
We can manufacture roller tracks for you at short notice with: Rollers with PU coating cylindrical running surface without
radial seam for delicate surface application: Glass and woodworking industry US-NR 05, load-carrying capacity 40 kg.
Plastic rollers with plain bearings US-NR 07, load-carrying capacity 10 kg.
Plastic rollers with ball bearings US-NR 10 / US-SR 10, load-carrying capacity 10 kg.
Rollers spray-coated with thermoplastic rubber, ball bearings US-NR 15, load-carrying capacity 10 kg.
Steel rollers with ball bearings US-NR 20 / US-SR 20, load-carrying capacity 20 kg.
Brush roller application: delicate surfaces, woodworking industry, automotive industry and wet areas.
If you cannot find the rollers to meet your requirements here, contact us. We will also find you the appropriate solution from our large roller assortment.
All rollers are interchangeable. Single rollers, see page F 66.
AccessoriesEnd stopUS-EUSliding end stopUS-SEUConnectorUS-VU
Universal roller tracksThe profile has a length of 6000 mm. We will deliver your requested length. This length should be divisible by 25.
The profile has 2 lateral rows of holes, with a hole pitch or 25 mm, and a row of holes in the base, with a pitch of 25 mm, Ø 8.2 mm.
Screwed connection: Special screws with end caps (VS26) or screws (M8).
US-EU
US-SEU
US-VU
* less saw cut
Available at
short notice!
F 54
We put things in motion Product similar to illustrations!
Leav
ing
tech
nica
l cha
nges
!
Universal roller tracks
Plastic rollers
Hard
Plain bearing-mounted
Load-carrying capacity per roller 40 kg
Plastic rollers with polyurethane coating
Ball bearing-mounted
Load-carrying capacity per roller 40 kg
Plastic rollers
Hard
Ball bearing-mounted
Load-carrying capacity per roller 15 kg
Roller type
Plastic rollers with polyurethane coating
Plain bearing-mounted
Load-carrying capacity per roller 40 kg
Construction height of upper/
lower row of holes x width
SpacingT U profile
Ident. No. Order No. mm mm mm
0026351 US-NR 05/050 61/53 x 33 50 44/28/44 x 20026353 US-NR 05/075 61/53 x 33 75 44/28/44 x 20026346 US-NR 05/100 61/53 x 33 100 44/28/44 x 20026347 US-NR 05/125 61/53 x 33 125 44/28/44 x 20026348 US-NR 05/150 61/53 x 33 150 44/28/44 x 20026349 US-NR 05/175 61/53 x 33 175 44/28/44 x 20026350 US-NR 05/200 61/53 x 33 200 44/28/44 x 2
Single rollers 2400/48/8-Gelb (see page F 66)
0029168 US-NR 08/050 61/53 x 33 50 44/28/44 x 20029169 US-NR 08/075 61/53 x 33 75 44/28/44 x 20029170 US-NR 08/100 61/53 x 33 100 44/28/44 x 20029171 US-NR 08/125 61/53 x 33 125 44/28/44 x 20029172 US-NR 08/150 61/53 x 33 150 44/28/44 x 20029173 US-NR 08/175 61/53 x 33 175 44/28/44 x 20029174 US-NR 08/200 61/53 x 33 200 44/28/44 x 2Single rollers 2400/48/8-K (see page F 66)
0019004 US-NR 07/050 62/54 x 41 50 44/28/44 x 20019003 US-NR 07/075 62/54 x 41 75 44/28/44 x 20026935 US-NR 07/100 62/54 x 41 100 44/28/44 x 20026936 US-NR 07/125 62/54 x 41 125 44/28/44 x 20026937 US-NR 07/150 62/54 x 41 150 44/28/44 x 20026938 US-NR 07/175 62/54 x 41 175 44/28/44 x 20026939 US-NR 07/200 62/54 x 41 200 44/28/44 x 2Single rollers GL/050/8/215 (see page F 66)
0026377 US-NR 10/050 61/53 x 33 50 44/28/44 x 20026379 US-NR 10/075 61/53 x 33 75 44/28/44 x 20026366 US-NR 10/100 61/53 x 33 100 44/28/44 x 20026368 US-NR 10/125 61/53 x 33 125 44/28/44 x 20026370 US-NR 10/150 61/53 x 33 150 44/28/44 x 20026372 US-NR 10/175 61/53 x 33 175 44/28/44 x 20026374 US-NR 10/200 61/53 x 33 200 44/28/44 x 2Single rollers 2300/48/8 (see page F 66)
Available at
short notice!
F 55
Product similar to illustrations! www.torwegge-group.com
Leav
ing
tech
nica
l cha
nges
!
Universal roller tracks
Roller type
Plastic fl anged rollers
Ball bearing-mounted
Load-carrying capacity per roller 10 kg
Plastic rollers with thermoplastic rubber coating
Ball bearing-mounted
Load-carrying capacity per roller 15 kg
Steel rollers
Ball bearing-mounted
Also available unlubricated
Load-carrying capacity per roller 20 kg
Steel fl anged rollers
Ball bearing-mounted
Load-carrying capacity per roller 15 kg
Brush rollers
Plain bearing-mounted
Load-carrying capacity per roller 2 kg
Construction height of upper/
lower row of holes x width
SpacingT U profile
Ident. No. Order No. mm mm mm
0026433 US-SR 10/075 61 x 33 75 44/28/44 x 20026423 US-SR 10/100 61 x 33 100 44/28/44 x 20026425 US-SR 10/125 61 x 33 125 44/28/44 x 20026427 US-SR 10/150 61 x 33 150 44/28/44 x 20026429 US-SR 10/175 61 x 33 175 44/28/44 x 20026431 US-SR 10/200 61 x 33 200 44/28/44 x 2Single rollers 2350/8KU (see page F 67)
0026387 US-NR 15/075 64 x 33 75 44/28/44 x 20026381 US-NR 15/100 64 x 33 100 44/28/44 x 20026382 US-NR 15/125 64 x 33 125 44/28/44 x 20026383 US-NR 15/150 64 x 33 150 44/28/44 x 20026384 US-NR 15/175 64 x 33 175 44/28/44 x 20026385 US-NR 15/200 64 x 33 200 44/28/44 x 2
Single rollers 2300/54/8-GU (see page F 66)
0026400 US-NR 20/050 61/53 x 41 50 44/28/44 x 20026402 US-NR 20/075 61/53 x 41 75 44/28/44 x 20026389 US-NR 20/100 61/53 x 41 100 44/28/44 x 20026392 US-NR 20/125 61/53 x 41 125 44/28/44 x 20026394 US-NR 20/150 61/53 x 41 150 44/28/44 x 20026396 US-NR 20/175 61/53 x 41 175 44/28/44 x 20026398 US-NR 20/200 61/53 x 41 200 44/28/44 x 2Single rollers 2200/48/8 (see page F 66)
0026457 US-SR 20/075 62 x 41 75 44/28/44 x 20026435 US-SR 20/100 62 x 41 100 44/28/44 x 20026437 US-SR 20/125 62 x 41 125 44/28/44 x 20026439 US-SR 20/150 62 x 41 150 44/28/44 x 20026441 US-SR 20/175 62 x 41 175 44/28/44 x 20026443 US-SR 20/200 62 x 41 200 44/28/44 x 2
Single rollers 2450/8 (see page F 67)
0026409 US-NR 30/075 61 x 41 75 44/28/44 x 20026403 US-NR 30/100 61 x 41 100 44/28/44 x 20026404 US-NR 30/125 61 x 41 125 44/28/44 x 20026405 US-NR 30/150 61 x 41 150 44/28/44 x 20026406 US-NR 30/175 61 x 41 175 44/28/44 x 20026407 US-NR 30/200 61 x 41 200 44/28/44 x 2Single rollers 2300/50/8-BÜRSTE HART (see page F 66)
AccessoriesIdent. No. Order No.
0026932 US-EU End stop
0026933 US-SEU Sliding end stop
0026934 US-VU Connector
When ordering please specify: The roller pitch. The exact length. The length should always be divisible by 25.
Example: US-NR 05/50x2250 mm long. Available in lengths up to max. 6000 mm.
Plain rollers, unless otherwise specified, are mounted in the lower row of holes.
Flanged rollers and rollers with thermoplastic rubber bindings are always mounted in the upper row.
F 56
We put things in motion Product similar to illustrations!
Leav
ing
tech
nica
l cha
nges
!
Multi-directional wheel tracks
Multi-directional wheel tracks AR/ASRS
Torwegge multi-directional wheel tracks can be used wherever there are large-surface units, goods containers, packages, boxes, or workpieces to be rotated, sorted, diverted, fed, or picked.
The dimensions and weight of the material to be conveyed determine the spacing of the rollers or the bars. Forces must be determined, if necessary, through trial runs.
Sendzimir-galvanized profile; each roller can be replaced individually.
Tracks with soft rollers are available on request. Single roller, see page F 66.
Roller mountedupper row of holes
Roller mountedlower row of holes
Single roller ASR 50 Multi-directional wheel tracks ASRS 50
Single roller ASR 60 Multi-directional wheel tracks ASRS 60
Single roller ASR 80 Multi-directional wheel tracks ASRS 80
Single roller AR 10 Multi-directional wheel tracks AR 10 For light loads Spacing U profile
Installation heightlower/upper row
of holes
Ident. No. Order No. mm mm mm0014882 AR 10/050 50 43/28/43 x 2 54/620014883 AR 10/075 75 43/28/43 x 2 54/620014880 AR 10/100 100 43/28/43 x 2 54/620014881 AR 10/125 125 43/28/43 x 2 54/620014873 Replacement roller: AR 10
The section modulus of the track is 2.2 cm3
Identical in construction to universal roller tracksAR 10 Order No.: .../U upper row of holes
Order No.: .../L lower row of holes
For light loads Spacing U profileInstallation
height
Ident. No. Order No. mm mm mm0014964 ASRS 50/066 66 45/44/45 x 2 600014961 ASRS 50/100 100 45/44/45 x 2 600014962 ASRS 50/133 133 45/44/45 x 2 600014963 ASRS 50/166 166 45/44/45 x 2 600014957 Replacement roller: ASR 500028806 End stop: EA 50
The section modulus of the track is 2.2 cm3
End stop EA 50
For medium loads Spacing U profileInstallation
height
Ident. No. Order No. mm mm mm0014966 ASRS 60/066 66 50/58/50 x 2 700014967 ASRS 60/100 100 50/58/50 x 2 700014968 ASRS 60/133 133 50/58/50 x 2 700014969 ASRS 60/166 166 50/58/50 x 2 700014958 Replacement roller: ASR 600028806 End stop: EA 60
The section modulus of the track is 3 cm3
End stop EA 60
For heavy loads Spacing U profileInstallation
height
Ident. No. Order No. mm mm mm0014975 ASRS 80/100 100 60/67/60 x 3 900014976 ASRS 80/133 133 60/67/60 x 3 900014977 ASRS 80/166 166 60/67/60 x 3 900014978 ASRS 80/200 200 60/67/60 x 3 900014960 Replacement roller: ASR 800028806 End stop: EA 80
The section modulus of the track is 5.2 cm3
End stop EA 80
Available at
short notice!
F 57
Product similar to illustrations! www.torwegge-group.com
Leav
ing
tech
nica
l cha
nges
!
Multi-directional wheel tracks
We also manufacture complete tables on request. Single roller, see page F 67.
Multi-directional roller tracks AWRSwith sturdy, smooth-running barrel rollers
Torwegge multi-directional roller tracks can be used to rotate, distribute, and move conveyed material.They are used in, e.g.:
Stone-working machines.
Woodworking and furniture industry.
In the packaging industry.
Automotive industry.
Machine construction.
Anywhere large-surface containers need to be rotated, sorted and transported.
Also available with polyurethane rollers in green.
Available with AWRS80 and AWRS120 on request.
Ident. No. Order No. Type
0015041 AWRS60/100 A
0028005 AWRS60/100 B
0027869 AWRS60/100-A-PUR A
0027870 AWRS60/100-B-PUR B
Available in lengths up to max. 2950 mm.
Rail A
Rail B
Rail A
Rail B
Rail A
Rail B
Ident. No. Order No. Type
0015036 AWRS48/100 A
0028004 AWRS48/100 B
Available in lengths up to max. 2950 mm.
Ident. No. Order No. Type
0015035 AWRS40/050 A
0026767 AWRS40/100 A
0028003 AWRS40/050 B
0026766 AWRS40/100 B
0027798 AWRS40/050-A-PUR A
0027889 AWRS40/100-A-PUR A
Available in lengths up to max. 2975 mm.
F 58
Available at
short notice!
We put things in motion Product similar to illustrations!
Leav
ing
tech
nica
l cha
nges
!
Colli roller tracks
The TORWEGGE Colli roller tracks can be equipped with various rollers.
Colli roller tracks
Roller type
2 x steel rollers, plastic-coated
Ball bearing-mounted
Load-carrying capacity per roller 40 kg
2 x steel rollers, plastic-coated
With fl ange
Ball bearing-mounted
1 polyamide roller
Deep groove ball bearing
Load-carrying capacity per roller 150 kg
Installa-tion height Spacing
Caster ØRoller width U profile
Ident. No. Order No. mm mm mm mm
0026419 US-NR 40/066 67 66 54 x 48 50/58/50 x 2.5
0026410 US-NR 40/100 67 100 54 x 48 50/58/50 x 2.5
0026413 US-NR 40/133 67 133 54 x 48 50/58/50 x 2.5
0026415 US-NR 40/166 67 166 54 x 48 50/58/50 x 2.5
0026417 US-NR 40/200 67 200 54 x 48 50/58/50 x 2.5
0022369 Single rollers NR 40 (see page F 66)
0026445 US-SR 40/100 67/75 100 54/70 x 48 50/58/50 x 2.5
0026446 US-SR 40/133 67/75 133 54/70 x 48 50/58/50 x 2.5
0026447 US-SR 40/166 67/75 166 54/70 x 48 50/58/50 x 2.5
0026448 US-SR 40/200 67/75 200 54/70 x 48 50/58/50 x 2.5
0023991 Single rollers SR 40 (see page F 67)
0026420 US-NR 50/066 67 66 54 x 48 50/58/50 x 2.5
0026411 US-NR 50/100 67 100 54 x 48 50/58/50 x 2.5
0026414 US-NR 50/133 67 133 54 x 48 50/58/50 x 2.5
0026416 US-NR 50/166 67 166 54 x 48 50/58/50 x 2.5
0026418 US-NR 50/200 67 200 54 x 48 50/58/50 x 2.5
0017225 Single rollers NR 50 (see page F 66)
F 59
Product similar to illustrations! www.torwegge-group.com
Leav
ing
tech
nica
l cha
nges
!
Colli roller tracks
Roller type
Polyamide roller
Plain bearing-mounted
Load-carrying capacity per roller 60 kg
Steel roller
Ball bearing-mounted
Load-carrying capacity per roller 120 kg
Steel roller with fl ange
Ball bearing-mounted
Load-carrying capacity per roller 120 kg
Installa-tion height Spacing
Caster ØRoller width U profile
Ident. No. Order No. mm mm mm mm
0027333 US-NR 70/066 67 66 54 x 48 50/58/50 x 2.5
0027334 US-NR 70/100 67 100 54 x 48 50/58/50 x 2.5
0027335 US-NR 70/133 67 133 54 x 48 50/58/50 x 2.5
0027336 US-NR 70/166 67 166 54 x 48 50/58/50 x 2.5
0027337 US-NR 70/200 67 200 54 x 48 50/58/50 x 2.5
0016651 Single rollers NR 70 (see page F 66)
0027324 US-NR 80/066 65 66 50 x 48 50/58/50 x 2.5
0027325 US-NR 80/100 65 100 50 x 48 50/58/50 x 2.5
0027326 US-NR 80/133 65 133 50 x 48 50/58/50 x 2.5
0027327 US-NR 80/166 65 166 50 x 48 50/58/50 x 2.5
0027328 US-NR 80/200 65 200 50 x 48 50/58/50 x 2.5
0026926 Single rollers NR 80 (see page F 66)
0027329 US-SR 80/100 65/75 100 50/70 x 48 50/58/50 x 2.5
0027330 US-SR 80/133 65/75 133 50/70 x 48 50/58/50 x 2.5
0027331 US-SR 80/166 65/75 166 50/70 x 48 50/58/50 x 2.5
0027332 US-SR 80/200 65/75 200 50/70 x 48 50/58/50 x 2.5
0026927 Single rollers SR 80 (see page F 67)
The stock length of the Colli roller track profile is 6000 mm. In general, we can supply you with any requested fixed length.
Please make sure that you provide us with a linear measurement in which the last two digits are 00, 33, or 66 (e.g., 4333 or 4300 or 4366 or 4400 mm).
Renewable rollers with ball bearings are mounted in a sendzimir-galvanized U-profile 50 x 58 x 50 x 2.5 mm.
Section modulus = Wy 3.0 cm3
Ordering example: Order No./Pitch/Profile/Length US-NR40/066/1/3000
US-NR 40 US-SR 40 US-NR 50 US-NR 70 US-NR 80 US-SR 80
AccessoriesIdent. No. Order No.
0027514 NR-EC End stop
0027515 NR-SEC Sliding end stop
0027516 NR-RSC Roller guard
0027517 NR-VC Connectors and screws
0032511 NR-RUC Return stop
F 60
We put things in motion Product similar to illustrations!
Leav
ing
tech
nica
l cha
nges
!
Pallet roller tracks
For live storage shelving, transport, and conveying
Pallet roller tracks
TORWEGGE pallet roller tracks can be equipped with various rollers.
Profile 2
Single rollers, see page F 66.
2-row profile ProfileInstallation
height Spacing Design
Ident. No. Order No. mm mm mm mm
0021544 NR 100/052/2 55/80/55 x 3 67 52
Steel roller
NR 100/078/2 55/80/55 x 3 67 78
0021582 NR 100/104/2 55/80/55 x 3 67 104
0021603 NR 100/130/2 55/80/55 x 3 67 130
0021605 NR 100/156/2 55/80/55 x 3 67 156
0021607 NR 100/182/2 55/80/55 x 3 67 182
0021609 NR 100/208/2 55/80/55 x 3 67 208
0027304 NR 110/078/2 55/80/55 x 3 69 78
Steel roller with cover tubing
PVC 2 mm
0027306 NR 110/104/2 55/80/55 x 3 69 104
0027308 NR 110/130/2 55/80/55 x 3 69 130
0027310 NR 110/156/2 55/80/55 x 3 69 156
0027312 NR 110/182/2 55/80/55 x 3 69 182
0027314 NR 110/208/2 55/80/55 x 3 69 208
0021611 SR 100/078/2 55/80/55 x 3 67/78 78
Steel roller with fl ange
0021613 SR 100/104/2 55/80/55 x 3 67/78 104
0021615 SR 100/130/2 55/80/55 x 3 67/78 130
0021617 SR 100/156/2 55/80/55 x 3 67/78 156
0021619 SR 100/182/2 55/80/55 x 3 67/78 182
0021621 SR 100/208/2 55/80/55 x 3 67/78 208
Roller type
Steel roller Ball bearing-
mounted Single roller:
(0022349) NR 100/50/8
Load-carrying capacity 160 kg
Steel roller with cover tubing PVC 2 mm
Ball bearing-mounted
Single roller: (0022792) NR 110/50/8
Steel roller with fl ange
Ball bearing-mounted
Single roller: (0023985) SR 100/50/8
Load-carrying capacity 160 kg
Available at
short notice!
F 61
Product similar to illustrations! www.torwegge-group.com
Leav
ing
tech
nica
l cha
nges
!
Pallet roller tracks
Single rollers see page F 66 / 67.
3-row profile ProfileInstallation
height Spacing Design
Ident. No. Order No. mm mm mm mm
0027315 NR 100/052/3 55/80/120 x 3 67 52
Steel roller
0027316 NR 100/078/3 55/80/120 x 3 67 78
0027317 NR 100/104/3 55/80/120 x 3 67 104
0027318 NR 100/130/3 55/80/120 x 3 67 130
0027319 NR 100/156/3 55/80/120 x 3 67 156
0027320 NR 100/182/3 55/80/120 x 3 67 182
0027321 NR 100/208/3 55/80/120 x 3 67 208
0027289 NR 110/078/3 55/80/120 x 3 69 78
Steel roller with cover tubing
PVC 2 mm
0027290 NR 110/104/3 55/80/120 x 3 69 104
0027291 NR 110/130/3 55/80/120 x 3 69 130
0027292 NR 110/156/3 55/80/120 x 3 69 156
0027293 NR 110/182/3 55/80/120 x 3 69 182
0027294 NR 110/208/3 55/80/120 x 3 69 208
TORWEGGE pallet roller tracks can be used to convey pallets longitudinally or transversely to their runners. A roller pitch of 52 mm is required for transverse transport of the pallet.
Profile 3
Depending on the weight of the pallet, two or three roller tracks with a roller pitch of 104–208 mm are used for pallet conveying.
Wy: 4,6 cm³ly: 17.0 cmStock length: 6000 mm (Profile 3 to 2990 mm)
Roller type
Steel roller with 160 kg load-carrying capacity
Available with PVC tube on request.
Single roller: NR 100/50/8
Steel roller with 150 kg load-carrying capacity
Available with fl anged roller or PVC tube on request.
Single roller: NR 110/50/8Accessories
Ident. No. Order No.
0010914 NR-EP End stop
0010915 NR-SEP Sliding end stop
0010916 NR-RSP Roller guard
0028819 NR-RU Return stop incl. roller
0027523 NR-VP Connector
Profile 3 available with max. length of 2990 mm.
Available with reinforced carrier rollers on request (TRM).
Profile raised on one side guides the transported material and prevents tilting !
F 62
We put things in motion Product similar to illustrations!
Leav
ing
tech
nica
l cha
nges
!
Groovy pallet roller tracks
For live storage shelving, transport, and conveying
Groovy pallet roller tracks
Single rollers, see page F 66.
Steel rollers with 160 kg load-carrying capacity
Ball bearing-mounted Order No.:
NR 200/60/10
Steel rollers with PVC coating
160 kg load-carrying capacity
Ball bearing-mounted Order No.:
NR 210/60/10
The Groovy pallet roller tracks can be used wherever TORWEGGE pallet roller tracks are considered to be too narrow as a result of their 74-mm roller length and a wider running surface is required.
Pallets measuring 1000 mm and 800 mm in width can be conveyed on 2 or 3 Groovy pallet roller tracks.
The advantage of Groovy pallet roller tracks is their durable construction. The carrier profile consists of 3-mm-thick galvanized steel with good deflection and torsional strength. The roller is manufactured from galvanized steel (Ø 60 x 2 mm) and has a load-carrying capacity of 160 kg. The ball bearings are maintenance-free and have a long service life.
The TORWEGGE Groovy pallet roller tracks can be equipped with the following rollers:
Profile 1 Profile Spacing Installation height Roller
Ident. No. Order No. mm mm mm Order No.
0022361 NR 200/066/1 65/130/65 x 3 66 80 NR 200/60/10
0022356 NR 200/100/1 65/130/65 x 3 100 80 NR 200/60/10
0022357 NR 200/133/1 65/130/65 x 3 133 80 NR 200/60/10
0022358 NR 200/166/1 65/130/65 x 3 166 80 NR 200/60/10
0022359 NR 200/200/1 65/130/65 x 3 200 80 NR 200/60/10
0022360 NR 200/60/10 Single roller
0027275 NR 210/100/1 65/130/65 x 3 100 82 NR 210/60/10PVC2mm
0027276 NR 210/133/1 65/130/65 x 3 133 82 NR 210/60/10PVC2mm
0027277 NR 210/166/1 65/130/65 x 3 166 82 NR 210/60/10PVC2mm
0027278 NR 210/200/1 65/130/65 x 3 200 82 NR 210/60/10PVC2mm
0024322 NR 210/60/10 Single roller
F 63
Product similar to illustrations! www.torwegge-group.com
Leav
ing
tech
nica
l cha
nges
!
Groovy pallet roller tracks
Profile 3 Profile Installation height Spacing Roller
Ident. No. Order No. mm mm mm Order No.
0027284 NR 200/066/3 65/130/125 x 3 80/125 66 NR 200/60/10
0027285 NR 200/100/3 65/130/125 x 3 80/125 100 NR 200/60/10
0027286 NR 200/133/3 65/130/125 x 3 80/125 133 NR 200/60/10
0027287 NR 200/166/3 65/130/125 x 3 80/125 166 NR 200/60/10
0027288 NR 200/200/3 65/130/125 x 3 80/125 200 NR 200/60/10
0027279 NR 210/066/3 65/130/125 x 3 82/125 66 NR 210/60/10PVC2mm
0027280 NR 210/100/3 65/130/125 x 3 82/125 100 NR 210/60/10PVC2mm
0027281 NR 210/133/3 65/130/125 x 3 82/125 133 NR 210/60/10PVC2mm
0027282 NR 210/166/3 65/130/125 x 3 82/125 166 NR 210/60/10PVC2mm
0027283 NR 210/200/3 65/130/125 x 3 82/125 200 NR 210/60/10PVC2mm
Please make sure that you provide us with a linear measurement in which the last two digits are 00, 33, or 66 (e.g., 4333 or 4300 or 4400 mm). Other lengths require a custom cut.
Ordering example:Order No./Pitch/Profile/Length
NR 200/066/1/Length
NR 210/100/3/Length
Wy: 6,6 cm³
ly: 31.0 cm
Stock length: 6000 mm (Profile 3 to 2966 mm)
Profile track: U-65/130/65, U-65/130/125
Profile 3Profile 1
Single rollers, see page F 66.
Profile 3 available with max. length of 2966 mm.Profile 1 available with max. length of 6000 mm.
AccessoriesIdent. No. Order No.
0027250 NR-EG End stop
0027251 NR-SEG Sliding end stop
0022360 NR 200/60/10 Steel roller
0024322 NR 210/60/10PVC2mm Steel roller with cover tubing (soft PVC tube approx. 2 mm thick)
Profile raised on one side guides the transported goods and prevents tilting !
F 64
We put things in motion Product similar to illustrations!
Leav
ing
tech
nica
l cha
nges
!
Ball transfer tracks
Ball transfer tracks for flat and surface-hardened goods
Using ball transfer units and ball transfer tracks, surface-hardened, large-surface goods can be moved or turned in all horizontal directions with little expenditure of energy.
The load-carrying capacity information refers to smooth, hardened undersides of the goods to be conveyed. In practice, however, considerably more ball transfer units than indicated by the theoretical load-carrying capacity must often be utilized, depending on the surface quality of the conveyed goods.
Color: RAL 5017 traffic blue
On request: Bright steel, galvanized, or other RAL colors.
Ball transfer track
Ball transfer tracks are used for the effortless transport of all types of large-surface and stable loads in all directions, with rolling friction.
Ball transfer units with steel sheet housing
Order No. KRS15 B and KRS 22 B
Ø 15 mm and Ø 22 mm
Also available with nylon balls.
Ball transfer units with solid housing
Order No. KRS15 M and KRS 22 M
Ø 15 mm and Ø 22 mm
Prices on request.
Order recommendation
KRS 22B/Pitch/Length
Individual rollers
KU 15B, KU22B, KU 15M, KU22M
For other ball transfer units see pages F 38 to F 43.Ball transfer tables on request.
Rolle Teilung T Bauhöhe V-Kantrohr
Ident-Nr. Bestell-Nr. Bestell-Nr. mm mm mm
0017457 KRS 15B/50 KU 15B 50 39.5 30 x 30 x 2
0017458 KRS 15B/75 KU 15B 75 39.5 30 x 30 x 2
0017454 KRS 15B/100 KU 15B 100 39.5 30 x 30 x 2
0017455 KRS 15B/125 KU 15B 125 39.5 30 x 30 x 2
0017456 KRS 15B/150 KU 15B 150 39.5 30 x 30 x 2
0017460 KRS 22B/100 KU 22B 100 60 50 x 50 x 3
0017461 KRS 22B/150 KU 22B 150 60 50 x 50 x 3
0017462 KRS 22B/200 KU 22B 200 60 50 x 50 x 3
F 65
Product similar to illustrations! www.torwegge-group.com
Leav
ing
tech
nica
l cha
nges
!
Heavy-duty roller tracks
Roller type
With deep groove ball bearing 6204/2RS
Polyamide roller
Load-carrying capacity per roller 1000 kg
With bearing 6204 ZV
Polyamide roller
Load-carrying capacity per roller 1000 kg
With bearing 6204 ZV
Polyurethane roller
Load-carrying capacity per roller 700 kg
With bearing 6204 ZV
Polyurethane roller
Load-carrying capacity per roller 700 kg
With bearing 6204 ZV
Installation height Spacing U profile
Ident. No. Order No. mm mm mm
0027860 US-NR09/050 60 50 44/28/44 x 3
0029175 US-NR09/075 60 75 44/28/44 x 3
0029176 US-NR09/100 60 100 44/28/44 x 3
0029177 US-NR09/125 60 125 44/28/44 x 3
0029178 US-NR09/150 60 150 44/28/44 x 3
0029179 US-NR09/175 60 175 44/28/44 x 3
0029180 US-NR09/200 60 200 44/28/44 x 3
0029192 998-SRS100/85 KN82 101 85 80/113/80
0029193 998-SRS100/170 KN82 101 170 80/113/80
0029194 998-SRS100/85 VN82 101 85 80/113/80
0029195 998-SRS100/170 VN82 101 170 80/113/80
With raised section on one side 0014772 999-SRS100/85 KN82/3 101/120 85 80/113/120
0014771 999-SRS100/170 KN82/3 101/120 170 80/113/120
With raised section on one side0010878 999-SRS100/85 VN82 101/120 85 80/113/120
0029196 999-SRS100/170 VN82/3 101/120 170 80/113/120
Heavy-duty roller tracksFor pallet transport
Load-carrying capacity up to approx. 7000 kg p/m Equipped with polyamide or polyurethane rollers
With isosceles profile 80/113/80Order No. 998/SRS
With scalene profile 80/113/120 mm Order No. 999/SRS
Available in lengths up to max. 2975 mm
Profile raised on one side guides the transported goods and prevents tilting !
US-NR-tracks 09For sturdy transport
Consists of a reinforced profile (in contrast to the usual US-NR tracks). Sturdy ball bearings are used instead of rollers. Available in lengths up to max. 2975 mm.
F 66
We put things in motion Product similar to illustrations!
Leav
ing
tech
nica
l cha
nges
!
Conveyor rollers
Conveyor rollers Torwegge conveyor rollers are available in steel, plastic,
and steel with rubber tire versions. They are primarily used in wheel conveyors, and
roller tracks for flow storage systems. The new deep groove ball bearings ensure that the
Torwegge conveyor rollers run smoothly and evenly. The steel sheet parts and hubs are galvanized for
corrosion protection. The cones, balls, and ball race are hardened and lightly
oiled (rollers with POM balls are not oiled). The use of POM balls in the rollers ensures low running noise.
* With cast-on rubber tire** With polyurethane coating and POM-GL bushing
D d A L B Material Bearing Color
Load-carrying capacity
daN
Ident. No. Order No. mm mm mm mm mm (kp)0011525 2200/28 28 6 11 24 12 Steel, galvanized Ball bearing galvanized 100011527 2200/48 48 6 12 24 16 Steel, galvanized Ball bearing galvanized 200011528 2200/48/8 48 8 12 24 16 Steel, galvanized Ball bearing galvanized 200027508 2200/48POM 48 6 12 24 16 Steel, galvanized POM balls galvanized 150027509 2200/48/8POM 48 8 12 24 16 Steel, galvanized POM balls galvanized 150011529 2200/50/8 50 8 13 68 63 Steel, galvanized Ball bearing galvanized 400011523 2200/100/6 100 6 11 24 16/1.8 Steel, galvanized Ball bearing galvanized 200011524 2200/100/8 100 8 13 24 16/1.8 Steel, galvanized Ball bearing galvanized 20
0011531 2300/48 48 6 12 24 16 Plastic Ball bearing blue 100011532 2300/48/8 48 8 12 24 16 Plastic Ball bearing blue 100011533 2300/48/Niro 48 6 12 24 16 Plastic Stainless steel balls blue 100016659 GL/050/8/21.5 50 8 16 22 18 Polyamide Plain bearing black 400011536 2300/54/8-GU 54 8 12 24 19 Rubber Ball bearing Blue-gray 150011543 2400/48/8-Gelb 48 8 17.4 23.5 17 Plastic/PU Plain bearing yellow 400028452 2400/48/8K-Gelb 48 8 14.4 23.5 17 Plastic/PU Ball bearing yellow 400011534 2300/50/8-BÜRSTE HART 50 8 - 23 20 Plastic/PA Plain bearing Black-gray 2
0022369 NR40 54 8 12 51 48 Steel plastic coated Ball bearing blue 400017225 NR50 54 8 18 52 48 Polyamide Ball bearing white 1500016651 NR70 54 8 15 50.5 48 Plastic Plain bearing black 600026926 NR80 50 8 16 52 48 Steel, galvanized Ball bearing galvanized 1600022349 NR100/50/8 50 8.2 16 74 68 Steel, galvanized Ball bearing galvanized 1600022792 NR110/50/8PVC2mm 54 8.2 16 74 68 Steel galv./soft PVC Ball bearing silver 1200022360 NR200/60/10 60 10 18 124 118 Steel, galvanized Ball bearing galvanized 1600024322 NR210/60/10 64 10 18 124 118 Steel galv./soft PVC Ball bearing silver 160
D d A L B Material Bearing Color
Load-carrying capacity
daN
Ident. No. Order No. mm mm mm mm mm (kp)0014873 AR 10 50 8.2 14 19 - Plastic Plain bearing white/black 50014957 ASR 50 50 8.2 14 40 28 Plastic Plain bearing white/black 100014958 ASR 60 60 8.2 20 53 31 Plastic Plain bearing white/black 200014959 ASR 60-Soft 60 8.2 20 53 31 Plastic Plain bearing white/black 200014960 ASR 80 80 8.2 35 60 45 Plastic Plain bearing white/black 40
Torwegge multi-directional wheel tracks can be used to create large table surfaces of any size.
These wheels, however, should only be used for light loads.
Please conduct trial runs in advance!
Multi-directional wheels
TORWEGGE- multi-directional wheels can be used wherever there are large-surface units, goods containers, packages, boxes, or workpieces to be rotated, sorted, diverted, fed, or picked.
F 67
Product similar to illustrations! www.torwegge-group.com
Leav
ing
tech
nica
l cha
nges
!
Conveyor rollers
Multi-directional wheels, sturdy construction
The center of the wheel rotates around a principal axle. The roller wheel is equipped with ribs. Six barrel rollers are located between the ribs. These barrel rollers operate transversely to the main direction
of travel, which means that an item can be transported in all directions.
All wheel parts are manufactured from plastic polyamide PA6.6; the axles are made of V2A.
Flanged rollers
Polypropylene rollersOrder No. 2410 and 2412/stainless steel with flangeOrder No. 2411 and 2413/stainless steel without flange
D S B L Material Bearing
Load-carrying capacity
daN
Ident. No. Order No. mm mm mm mm (kp)0011544 2410M8x15 38 60 28 25 Plastic 2 ball bearings 100011545 2411M8x15 38 - 28 28 Plastic 2 ball bearings 100011546 2412/NiroM8x18 38 60 28 25 Plastic 2 ball bearings 80011547 2413/NiroM8x18 38 - 28 28 Plastic 2 ball bearings 8
D S d B L Material Bearing
Load-carrying capacity
daN
Ident. No. Order No. mm mm mm mm mm (kp)0011549 2450/8 50 66 8 21 18 Steel, galvanized Ball bearing 150011550 2460/6 50 76 6 31 24 Steel, galvanized Ball bearing 100011551 2460/8 50 76 8 31 24 Steel, galvanized Ball bearing 150011552 2470/M8x18 50 76 - 46 40 Steel, galvanized Ball bearing 40
0023985 SR100/50/8 50 72 8 74 68 Steel, galvanized Ball bearing 1600011539 2350/6Ku 48 66 6 16.5 19.5 Plastic Ball bearing 100011541 2350/8Ku 48 66 8 16.5 19.5 Plastic Ball bearing 100011540 2350/6Ku/Niro 48 66 6 16.5 19.5 Plastic Stainless steel bearing 100011542 2350/8Ku/Niro 48 66 8 16.5 19.5 Plastic Stainless steel bearing 100023991 SR40 54 70 8 48 44 Steel plastic coated Ball bearing 400026927 SR80 50 72 8.2 48 44 Steel, galvanized Ball bearing 160
Multi-directional
wheels Ø
Instal-lation width
Axle/Thread
Axle length Material Bearing
Load-carrying capacity
daN
Ident. No. Order No. mm mm mm/M mm (kp)0015025 AWR40 40 31 8 - Polyamide red Plain bearing 100015027 AWR40 PUR 40 31 8 - Polyurethane green Plain bearing 100015026 AWR40 Achse 40 31 8/M6 50 Steel, galvanized Plain bearing 10
0015028 AWR48 48 41 8 - Polyamide gray Plain bearing 150015029 AWR48 Achse 48 41 8/M6 58 Steel, galvanized Plain bearing 15
0015030 AWR60 60 50 8 - Polyamide gray Plain bearing 200015032 AWR60 PUR 60 50 8 - Polyurethane green Plain bearing 200015031 AWR60 Achse 60 50 8/M6 71 Steel, galvanized Plain bearing 20
0034751 AWR80 80 66 8 - Polyamide black Plain bearing 400034752 AWR80 PUR 80 66 8 - Polyurethane aubergine Plain bearing 400034753 AWR80 ALU 80 66 8 - Aluminum Plain bearing 400015034 AWR80 Achse 80 66 8/M6 88 Steel, galvanized Plain bearing 40
0015023 AWR120 120 93 12 - Polyamide gray Plain bearing 600026925 AWR120 PUR 120 93 12 - Polyurethane green Plain bearing 600015024 AWR120 Achse 120 93 12/M10 129 Steel, galvanized Plain bearing 60