Transcript
Page 1: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

DYNAMIC AIR INC.

Pneumatic Conveying Concepts16

Page 2: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

Dynamic Air Inc. Corporate Headquarters, St. Paul, Minnesota, USA

Dynamic Air Ltda., Sao Paulo, BrazilDynamic Air Ltd., Milton Keynes, United Kingdom

Page 3: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

1

Let’s Dispel Some Myths, Right Away

Fact: Dynamic Airis world renowned for itspneumatic conveying systems.

1. Each Dynamic Air system is custom-designed, with over 15,000 systems worldwide.

2. Our systems utilize the best available technology to achieve the optimum performance characteristics at the highest effi ciencies.

3. Our systems provide the ultimate in reliability with capacities as low as a few hundred pounds (100 kg) per hour to over 400 tons per hour and distances exceeding 5000 feet (1500 m) in length.

4. Dynamic Air has developed 16 different pneumatic conveying concepts, utilizing both pressure and vacuum for handling a wide variety of dry bulk solids and process applications.

5. Our systems and services are comprehensive. (Complete systems can include weighing, batching, blending, mixing, lump breaking, storage, complete electronic control equipment and more.) And we offer complete layout and design, a state-of-the-art full scale test facility and the highest caliber of technical expertise in the business.

This brochure explains how our systems can improve effi ciency, reliability and overall quality of your material-conveying process. But keep in mind that manufacturing the highest quality systems in the world is only part of our success story. Dynamic Air has built its reputation on listening to our customers, designing custom systems to fi t specifi c and unique needs, and providing outstanding fi eld support services on a worldwide basis.

Everybody Claims That His System Is The Best For Every Application

Page 4: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

2

We are the world’sdense phase pneumaticconveying specialistsWe are a manufacturer.Our systems are recognized as second to none for their reliability and performance. And they go beyond pneumatic conveying to include a full range of components for a complete material handling system: air-activated gravity conveyors, switches, bag breakers, batch weighing systems, diverter valves, mixers and blenders, dust control equipment, automatic bag openers, lump breakers, aerators, bin discharge systems, silo blenders, feeders, rotary spouts, powder pumps, storage bins and hoppers, and much more, any of which can be designed into a Dynamic Air system.

We provide complete systems.Any truly high performance system is more than hardware. Dynamic Air is a world leader in dense phase pneumatic conveying because of our people and the expertise they can bring to your material handling design problem.

We are listeners fi rst and foremost. We never walk into a client’s plant with standardized plans in our back pockets and off-the-shelf “compromise” solutions. Instead, we merge our bulk handling expertise with your unique process knowledge to design a custom system for your application.

We have a fully equipped testing laboratory.If you have a new material that must be tested or if our knowledge of your material is limited, we will test your special material in our full scale test facility.

In our testing lab, we determine conveyability, material-to-air ratios, material velocities, hygroscopic effects, build-up tendencies, dust collector requirements, degradation, segregation, fi lling times, conveying times, optimum conveying pressures, air volumes, aerated bulk densities and any other test data that might be required. Little is left in doubt.

Complete systems for storage, conveying, weighing, batching and blending - including steel structures.

Full scale testing facilities.

Page 5: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

3

A comprehensive installation for conveying carbon black.

Weighing/batching and conveying system including storage silos and steel structures.

Multiple conveying lines fi t easily into tight spaces.

Page 6: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

4

Our capabilities include weighing, batching, feeding, mixing and drying

Full Line Concept® pneumatic conveying system conveying corn.

Mobile Truck LanceTM fi lling a truck.

Mixing & conveying systems.

High density vacuum system conveying carbon black.

Dense phase pneumatic conveying systems. Multiple 20 cu. ft. (0.6 cu. m) surge bins with Modu-Kleen® 669 bin vent fi lters.

Bulk bag and small bag unloaders discharge carbon black into multiple dense phase Full Line Concept® conveying systems.

Page 7: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

5

Dense phase transporter with a Vibra-Jet® bin discharger conveying detergent.

Bin discharging & conveying systems.

Storage silos are fi lled by a Full Line Concept® conveying system.

Batching & conveying systems.

Dyna-SlideTM high precision feeders convey material from 200 cu. ft. (6 cu. m) surge bins to weigh hoppers.

Storage & feeding systems.

HDV TM high density vacuum Full Line Concept® conveying system located inside a truck unloading building.

Page 8: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

When it comes to pneumatic conveying of bulk granular materials, our 16 conveying concepts are state of the art!With over 40 years of building highly effi cient dense phase and dilute phase pneumatic conveying systems, you can be assured that Dynamic Air technology is the latest and the best in the industry. We have developed many fi rsts in the industry, such as our dense phase Full Line Concept® system, which signifi cantly reduces material degradation and/or abrasion, lowers maintenance and has tremendous energy savings over conventional pneumatic conveying systems.

Dynamic Air offers 16 different pneumatic conveying concepts:

• Four different vacuum conveying systems

• Twelve different pressure conveying systems.

Each system has it own unique set of operating characteristics for pressure, conveying line velocity, effi ciency and performance. Because each and every material to be conveyed reacts differently under a

given set of operating conditions, it is extremely critical to match the system operating characteristics to the material to be conveyed in order to achieve the most desired conveying performance and to provide the best value to you, the customer.

Our 16 different pneumatic conveying concepts have the ability to convey at almost any conveying velocity desired to suit a given material to be conveyed.

6

Page 9: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

Typical materials conveyed are:alumina, aluminum oxide, baby formula, ball clay, barite, bauxite, bentonite, borax, calcium carbonate, calcium chloride, carbon black, cement, roasted coffee beans, green coffee beans, cullet, detergent, feldspar, fi ne coal, fl our, fl uorspar, fl y ash, foundry molding sand, glass batch, glass beads, ground meal, gypsum, iron oxide, kaolin clay, kyanite, lime, litharge, magnesium, milk powder, peanuts, PVC resin, quartz, roofi ng granules, salt, silica sand, soda ash, sodium sulfate, steel chips, sulfur, sugar, talc, titanium dioxide and more.

Dynamic Air pneumatic conveying systems are:• Energy and labor effi cient

• More reliable, because of our DC-5 Air Saver technology

• Flexible to design in tight plant environments

• Easy to install with minimum disruption to existing plant production

• Clean - because the system totally contains the material conveyed

• Friendly to the environment

• Equipped with fewer moving parts

• Lower in initial investment costs

• Lower in maintenance

7

We can convey many materials with conveying velocities as low as 50 feet per minute (0.25 m/sec) using our HDV 8000 dense phase pneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per minute (35 m/sec). Plus our conveying capacities range from just a few hundred pounds (100 kg) of material per hour up to 400 tons per hour and conveying distances exceeding 5000 feet (1500 m) in length.

In addition, our pneumatic conveying systems become highly effi cient when they employ our unique patented DC-5® Air Saver technology and are unmatched for performance and reliability. These systems can handle even the most diffi cult of materials, plus they signifi cantly reduce the energy requirements and convey material at much lower conveying line velocity with higher conveying line densities and reduced dynamic loading.

When our DC-5 Air Saver technology is employed on lower pressure systems using less than 15 PSIG (1 barg), in many applications we can lower the conveying line velocity well

below the normal saltation velocity. Depending on the material being conveyed, we also can reduce energy requirements and drastically improve system performance and reliability.

The Result: Gentle handling of heavy abrasive and non-abrasive materials that cannot tolerate degradation. For many fragile crystalline and granular materials there is no fi ner material handling process. Dynamic Air’s 16 different pneumatic conveying concepts can offer a more gentle treatment of system components as well. Because of lower velocities, system wear and related breakdowns are minimized.

Page 10: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

Dynamic Air’s exclusiveDC-5® Air Saver technology is the key to complete control of your material through the entire conveying line

One of the secrets of a successful and highly effi cient pneumatic conveying system, whether it is a high pressure dense phase system or a low pressure dilute phase system, is trying to achieve an optimum pressure balance. Many systems operate in what we call an unstable and/or unbalanced pressure condition. This means the conveying system can be using either too much compressed air or not enough compressed air, both of which are undesirable.

When excessive compressed air is used to convey a given material, the conveying velocity will be too high and the result can be material breakdown or excessive wear on the system. Also, the system will use excessive energy, and therefore maintenance becomes higher and reliability is reduced. When not enough compressed air is used, the convey rate may be too low and it’s even possible that conveying line plugging can occur. It is also important to understand

that every system must constantly fi ght friction, and that this friction is usually not evenly distributed throughout the conveying line. For instance, tubing bends are a major cause of friction in a pneumatic conveying system and they can easily be responsible for more than 50% of the total resistance of the pneumatic conveying system. The straight tubing in a system, however, has a much lower level of friction than a tubing bend.

Other friction factors which must be considered are components such as conveying line couplings, diverter valves, elevation changes, etc. Also, the shape, density and cohesiveness of each material to be conveyed create another variable which adds to the total friction factor, thus impeding the conveying process even further.

8

Page 11: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

The DC-5 Air Saver technology is adaptable to almost any type of Dynamic Air pneumatic conveying system regardless of the conveying pressure or vacuum. The DC-5 Air Saver technology is one of the most

unique products ever developed by Dynamic Air and is another fi rst in the fi eld, making Dynamic Air an innovator in the fi eld of high performance pneumatic conveying systems.

Benefi ts of the DC-5 Air Saver technology• Decreased energy consumption

• Improved system reliability

• Ability to convey very fragile materials

• Ability to convey highly abrasive materials

• Ability to convey diffi cult or cohesive materials

• Ability to convey heavy materials

• Ability to start and stop the conveying process with a conveying line full of material

• Reduced “dynamic loading” at pipe bends by controlling the conveying velocity

• Reduced dust handling requirements

• Reduced material degradation

Therefore, the frictional resistance seen in the conveying line will vary considerably from system to system and throughout a given system, depending upon the components used plus the length of the conveying line and the conveying velocity. These varying and unbalanced frictional forces in a pneumatic conveying system, if not pressure balanced properly, can cause unstable and undesirable pressure and velocity conditions, resulting in poor performance and an unreliable and ineffi cient conveying system.

In order to create the optimum pressure balance in a pneumatic conveying system and to counteract the varying forces of friction, the compressed air must be properly and timely distributed for a smooth fl ow of material through the conveying line.

The pressure balance control must also be precise and instantaneous. If the pressure balance control reacts too slowly or overcompensates, the fl ow of material through the conveying line will be disrupted and the performance compromised.

To effectively counterbalance all the friction factors normally inherent in a pneumatic conveying system, Dynamic Air has developed the DC-5 Air Saver technology which accurately controls and pressure balances the pneumatic conveying system.

The DC-5 Air Saver technology achieves the proper pressure balance because it automatically senses the conveying system conditions and reacts instantaneously and accurately without overcompensation. Thus material is conveyed through the conveying line in a smooth controlled manner and at the desired conveying velocity, to optimize the conveying process for higher performance and reliability.

9

Page 12: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

HDP 1000 Brute Force ConceptTM Dense Phase Pressure System

HDP 2000 Fluidizing ConceptTM Dense Phase Pressure System

The HDP 1000 Brute Force Concept Pressure Conveying System is a dense phase, high pressure, low to medium velocity, batch conveying system. It is generally used for conveying medium to high density, heat sensitive, semi-abrasive and/or abrasive materials over shorter distances. Examples include silica sand, plastic pellets, salt, quartz, whole grain, corn, oats and barley.

Typical conveying velocities are generally about 1000 feet per minute (5 m/sec) and the conveying pressure up to 60 PSIG (4 barg). A pressure vessel is used to feed material into the conveying line and the air supply, up to 100 PSIG (7 barg), is supplied from a high pressure air compressor.

The HDP 2000 Fluidizing Concept Pressure Conveying System is a dense phase, medium to high pressure, low to medium velocity, batch conveying system. It is generally used for conveying medium to high density, heat sensitive, semi-abrasive and/or abrasive materials under 100 mesh particle sizes. Examples include bentonite, cement, starch, silica fl our, ball clay, kaolin clay, and alumina.

Typical conveying velocities are generally in the range of 1000 to 5000 feet per minute (5 m to 25 m/sec) and the conveying pressure up to 60 PSIG (4 barg). A fl uidizing type pressure vessel is used to feed material into the conveying line and the air supply, up to 100 PSIG (7 barg), is supplied from a high pressure air compressor.

Transporter

LevelControl

Bin VentFilter

Air CompressorAir Receiver

Air OperatedInlet Valve

StorageSilo

VentValve

Receiving Bin

Conveying Line

Transporter

Fluidizing Air Supply

LevelControl

Bin Vent Filter

Air CompressorAir Receiver

Air OperatedInlet Valve

StorageSilo

VentValve

Receiving Bin

Switch Receiver

Conveying Line

10

16 Pneumatic Conveying Concepts

Page 13: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

StorageSilo

Transporter

LevelControl

Bin VentFilter

Air CompressorAir Receiver

AirOperatedInlet Valve

VentValve

SwitchReceiver

ReceivingBin

ConveyingLine

DC-5 Air Saver Control

HDP 3000 Conventional ConceptTM Dense Phase Pressure System

HDP 4000 Full Line Concept® Dense Phase Pressure System

The HDP 3000 Conventional Concept Pressure Conveying System is a dense phase, medium to high pressure, low to medium velocity batch type conveying system. It is generally used for conveying high to medium density, heat sensitive, semi-abrasive and/or very abrasive, cohesive and/or very fragile materials in almost any particle size range. Examples include silica sand, glass batch, granulated sugar, powdered sugar, plastic pellets, bentonite, cement, starch, silica fl our, ball clay, kaolin clay, zinc oxide and alumina.

Typical conveying velocities are generally in the range of 100 to 1000 feet per minute (0.5 m to 5 m/sec) and the conveying pressure up to 100 PSIG (7 barg) pressure.

This concept uses a non-fl uidizing type pressure vessel to feed material into the conveying line at maximum density and utilizes DC-5 Air Saver technology to minimize and optimize the high pressure air which is supplied by a high pressure - up to 100 PSIG (7 barg) air compressor.

The HDP 4000 Full Line Concept Pressure Conveying System is a dense phase, medium to high pressure, low to medium velocity, batch type conveying system. It is generally used for conveying medium to high density, heat sensitive, semi-abrasive and/or very abrasive, cohesive, and/or very fragile materials in almost any particle size range over long distances. Examples include silica sand, glass batch, granulated sugar, powdered sugar, fi nished breakfast cereal, coffee beans, plastic pellets, bentonite, cement, starch, silica fl our, ball clay, kaolin clay, zinc oxide and alumina.

Typical conveying velocities are generally in the range of 100 to 1000 feet per minute (0.5 m to 5 m/sec) and the conveying pressure up to 100 PSIG (7 barg).

This concept uses a single, non-fl uidizing type pressure vessel to feed material into the conveying line at maximum density. DC-5 Air Saver technology is used to minimize and optimize the high pressure air which is supplied by a high pressure - up to 100 PSIG (7 barg) -air compressor. This concept does not need diverter valves but uses valve receivers which provide a distinct maintenance advantage as they are located on the silo tops for easy access.

Transporter

Level Control

Bin Vent Filter

Air CompressorAir Receiver

Air OperatedInlet Valve

StorageSilo

VentValve

Receiving Bin

Conveying Line

Valve Receiver

DC-5 Air

Saver Control

Pressure BalancedDC-5 Air Saver

Pressure BalancedDC-5 Air Saver

11

Page 14: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

The HDP 5000 Full Line Concept Continuous Pressure Conveying System is a dense phase, medium to high pressure, very low to medium velocity, continuous conveying system. It is generally used for conveying medium to high density, heat sensitive, semi-abrasive and/or very abrasive, cohesive, and/or very fragile materials in almost any particle size range over long distances. Examples include fi nished laundry detergent, silica sand, glass batch granulated sugar, powdered sugar, fi nished breakfast cereal, coffee beans, plastic pellets, bentonite, cement, starch, silica fl our, ball clay, kaolin clay, zinc oxide, pelletized carbon black and alumina.

Typical conveying velocities are generally in the range of 100 to 1000 feet per minute (0.5 m to 5 m/sec) and the conveying pressure up to 100 PSIG (7 barg).

This concept uses two non-fl uidizing type pressure vessels which operate alternately to feed material into the conveying line at maximum density. DC-5 Air Saver technology is used to minimize and optimize the high pressure air which is supplied by a high pressure - up to 100 PSIG (7 barg ) - air compressor.

HDP 5000 Full Line Continuous Concept®

Continuous Dense Phase Pressure System

MDP 2000 Pressure ConceptTM

Continuous Dense Phase Pressure System

The MDP 2000 Pressure Concept Conveying System is a dense phase, low pressure, medium velocity, continuous conveying system. It is used for conveying low density, heat sensitive, and non-abrasive materials over shorter distances where high pressure compressed air is available. Examples of materials that can be conveyed include plastic pellets, detergent powder, wheat, barley, corn, oats, limestone, coffee beans, granulated sugar, ball clay and boric acid.

Typical conveying line velocities are 2000 to 3000 feet per minute (10 m to 15 m/sec) and the conveying pressure is up to 15 PSIG (1 barg).

This concept utilizes a high density feeder to control the feed rate into the conveying line. The air is supplied by a high pressure - up to 100 PSIG (7 barg) - air compressor.

Air OperatedOutlet Valve

Transporter

LevelControl

Bin Vent Filter

Air Compressor

Air Receiver

Air OperatedInlet Valve

StorageSilo

VentValve

Receiving Bin

Conveying Line

DC-5 Air

Saver Control

HighDensityFeeder

Bin VentFilter

Air CompressorAir Receiver

StorageSilo

Receiving Bin

Conveying Line

LevelControl

Pressure BalancedDC-5 Air Saver

12

16 Pneumatic Conveying Concepts

Page 15: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

The MDP 4000 Pressure Concept Conveying System is a dense phase, low pressure, low to medium velocity, continuous conveying system where compressed air is readily available. It is used for conveying low or medium density, heat sensitive, non-abrasive and/or friable materials over shorter distances. Examples of materials that can be conveyed include plastic pellets, fi nished detergent powder, limestone, coffee beans, granulated sugar, ball clay, boric acid, fi nished breakfast cereals and pelletized carbon black.

Typical conveying line velocities are 1000 to 2000 feet per minute (5 m to 10 m/sec) and conveying pressure is up to 15 PSIG (1 barg).

This concept utilizes a high density feeder to feed the material into the conveying line and DC-5 Air Saver technology to minimize and optimize the high pressure air which is supplied by a high pressure - up to 100 PSIG (7 barg) - air compressor.

MDP 4000 Pressure ConceptTM

Continuous Dense Phase Pressure System

The LDP 2000 Pressure Concept Conveying System is a dilute phase, low pressure, high velocity, continuous conveying system. It is generally used for conveying low to medium density, and non-abrasive bulk solids where degradation of the conveyed material is not a concern. Examples of materials include fl our, sugar, salt, grain, malt and plastic pellets.

Typical conveying velocities are generally in excess of 4000 feet per minute (20 m/sec) and conveying pressure is up to 15 PSIG (1 barg).

This concept utilizes a rotary airlock feeder to control the feed rate into the conveying line. A low pressure positive displacement blower is used for the air supply.

LDP 2000 Pressure ConceptTM

Continuous Dilute Phase Pressure System

High DensityFeeder

Bin VentFilter

StorageSilo

Receiving Bin

Conveying Line

Air CompressorAir ReceiverDC-5 Air

Saver Control

LevelControl

RotaryAirlockFeeder

Bin VentFilter

StorageSilo

Receiving Bin

Conveying Line

Positive Displacement Pressure Blower

LevelControl

Pressure BalancedDC-5 Air Saver

13

Page 16: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

LDP 4000 Pressure ConceptTM

Continuous Dilute Phase Pressure System

RotaryAirlockFeeder

Bin VentFilter

StorageSilo

Receiving Bin

Conveying Line

Positive Displacement PressureBlower

DC-5 Air Saver Control

LevelControl

The LDP 4000 Pressure Concept Conveying System is a dilute phase, low pressure, medium velocity, continuous conveying system. It is generally used for conveying low to high density and/or non-abrasive materials where degradation of the conveyed material is somewhat of a concern. Examples include iron oxide, coffee beans, pinto beans, fl our, fi ne chemicals, grain, malt, plastic pellets, sugar and salt.

Typical conveying velocities are generally about 2000 feet per minute (10 m/sec) and conveying pressure is up to 15 PSIG (1 barg).

This concept utilizes a rotary airlock feeder to control the feed rate to the conveying line. DC-5 Air Saver technology is used to minimize and optimize the low pressure supply air which is supplied by a low pressure positive displacement blower.

Transporter

Bin VentFilter

Air OperatedInlet Valve

StorageSilo

VentValve

Receiving Bin

Conveying Line

Positive Displacement Pressure Blower

Air OperatedOutlet Valve

LevelControl

The LDP 6000 Pressure Concept Conveying System is a dilute phase, low pressure, medium velocity batch conveying system. It is generally used for conveying low to high density, fl uidizable, mildly abrasive materials that are not heat sensitive. Examples include sea coal, silica fl our, bentonite, soda ash, cement, fl y ash, alumina, and hydrated lime.

Typical conveying line velocities are generally about 2500 feet per minute (12.5 m/sec) and the conveying pressure is up to 15 PSIG (1 barg). This concept uses a pressure vessel to feed the material into the conveying line while air is supplied by a low pressure positive displacement blower.

LDP 6000 Pressure ConceptTM

Batch Dilute Phase Pressure System

Pressure BalancedDC-5 Air Saver

14

16 Pneumatic Conveying Concepts

Page 17: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

LDP 8000 Pressure ConceptTM

Batch Medium Phase Pressure System

LevelControl

Transporter

Bin VentFilter

Air OperatedInlet Valve

StorageSilo

VentValve

Receiving Bin

Conveying Line

Positive Displacement Pressure Blower

DC-5 Air

Saver Control

Air OperatedOutlet Valve

The LDP 8000 Pressure Concept Conveying System is a medium phase, low pressure, low to medium velocity, batch conveying system. It is generally used for conveying medium to high density, semi-abrasive, fl uidizable materials which can be somewhat diffi cult to convey. Examples include coffee beans, powdered chocolate, ground limestone, calcium carbonate, alumina, iron oxide, cement and silica fl our.

Typical conveying velocities are generally about 1500 feet per minute (7.5 m/sec) and the conveying pressure is up to 15 PSIG (1 barg).

This concept utilizes a pressure vessel to feed the material into the conveying line and DC-5 Air Saver technology to minimize and optimize the low pressure supply air which is supplied by a low pressure positive displacement blower.

Air OperatedOutlet Valve

Transporter

LevelControl

Bin Vent Filter

Air OperatedInlet Valve

StorageSilo

VentValve

ManualGate

Positive DisplacementPressure Blower

Receiving Bin

Conveying Line

DC-5 Air

Saver Control

The LDP 10,000 Pressure Concept Conveying System is a medium phase, low pressure, low to medium velocity, continuous conveying system for longer distances. It is generally used to convey medium to high density, semi-abrasive, fl uidizable materials which can be somewhat diffi cult to convey. Examples include coffee beans, powdered chocolate, ground limestone, calcium carbonate, alumina, iron oxide, cement and silica fl our.

Typical conveying velocities are generally about 1500 feet per minute (7.5 m/sec) and the conveying pressure is up to 15 PSIG (1 barg).

This concept uses a pressure vessel to feed the material into the conveying line and DC-5 Air Saver technology to minimize and optimize the low pressure supply air which is supplied by a low pressure positive displacement blower.

LDP 10,000 Full Line Pressure ConceptTM

Continuous Medium Phase Pressure System

Pressure BalancedDC-5 Air Saver

Pressure BalancedDC-5 Air Saver

15

Page 18: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

LDV 2000 Vacuum ConceptTM Continuous Dilute Phase Vacuum System

LDV 4000 Vacuum ConceptTM Continuous Dilute Phase Vacuum System

Positive DisplacementBlower

Hopper BottomRail Car

Storage Silo

Vacuum Return Line

Vacuum Filter/Receiver

ConveyingLine

Level Control

PickupNozzle

Flexible Hose

RotaryAirlock

Filter

The LDV 2000 Vacuum Concept Conveying System is a dilute phase, high velocity, low pressure, continuous vacuum conveying system for shorter distances. It is generally used to convey low to medium density and non-abrasive materials. Examples include fl our, kaolin clay, plastic pellets, grain, malt, corn, starch and plastic resin.

Typical conveying velocities are generally in excess of 4000 feet per minute (20 m/sec) and vacuum conveying pressures of up to 15 inches (381 mm) of mercury (hg).

The material is fed into the conveying line on a continuous basis by vacuum which is supplied by a low pressure positive displacement blower. The system includes a vacuum pickup nozzle, vacuum conveying line, a vacuum fi lter receiver, a rotary airlock feeder and a positive displacement blower.

Vacuum Filter/Receiver

Hopper BottomRail Car

ConveyingLine

PickupNozzle

Flexible Hose

Storage Silo

Positive DisplacementBlower

Vacuum Return Line

RotaryAirlock

Filter

DC-5 Air

Saver Control

The LDV 4000 Vacuum Concept Conveying System is a dilute phase, medium to high velocity, low pressure, continuous vacuum conveying system for shorter distances. It is generally used to convey low to high density, non-abrasive and semi-abrasive materials. Examples include iron oxide, titanium dioxide, silica fl our, cement, and limestone.

Typical conveying velocities are 1000 to 3000 feet per minute (5 m to 15 m/sec) and vacuum conveying pressures of up to 15 inches (381 mm) of mercury (hg).

The material is fed into the conveying line on a continuous basis by vacuum. DC-5 Air Saver technology is used to minimize and optimize the low pressure supply air which is supplied by a low pressure positive displacement blower. The system includes a vacuum pickup nozzle, a vacuum fi lter receiver, a rotary airlock feeder and a positive displacement blower.

Pressure BalancedDC-5 Air Saver

16

16 Pneumatic Conveying Concepts

Page 19: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

HDV 6000 Vacuum ConceptTM

Continuous Dense Phase Vacuum System

HDV 8000 Vacuum ConceptTM

Continuous Dense Phase Vacuum System

The HDV 6000 Vacuum Concept Conveying System is a dense phase, medium velocity, high pressure, continuous vacuum conveying system. It is generally used to convey low to high density, granular or pelletized, and semi abrasive materials. Examples include plastic pellets, granulated sugar, salt, coffee beans, pinto beans, and peanuts.

Typical conveying velocities are 300 to 1000 feet per minute (1.5 m to 5 m/sec) and vacuum conveying pressures of up to 29 inches (737 mm) of mercury (hg).

The material is fed into the conveying line on a continuous basis by vacuum which is supplied by a high pressure vacuum pump. The system includes a vacuum pickup nozzle, a vacuum conveying line, a vacuum/fi lter receiver, a secondary fi lter and a vacuum pump. For continuous conveying applications, a gatelock hopper with an inlet and outlet valve is installed at the discharge of the vacuum receiver.

ConveyingLine

Hopper BottomRail Car

Storage Silo

SecondaryFilter

Vacuum Return Line

Vacuum Filter/Receiver

Filter

VacuumPump

Level Control

GatelockHopper

PickupNozzle

Flexible Hose

Air Operated Valve

The HDV 8000 Vacuum Concept Conveying System is a dense phase, low to medium velocity, high pressure, continuous vacuum conveying system. It is generally used to convey low to high density, friable, and abrasive materials and/or other materials where degradation or abrasion is a concern. Examples include plastic pellets, breakfast cereal, granulated sugar, salt, coffee beans, pinto beans, fi nished detergent, pelletized carbon black and silica sand.

Typical conveying velocities are 50 to 800 feet per minute (0.25 m to 4 m/sec) and vacuum conveying pressures of up to 29 inches (737 mm) of mercury (hg).

The material is fed into the conveying line on a continuous basis by vacuum. DC-5 Air Saver technology is used to minimize and optimize the pressure supply air which is supplied by a high pressure vacuum pump. The system includes a vacuum pickup nozzle, a vacuum conveying line, DC-5 Air Saver controls, a vacuum fi lter receiver, a secondary fi lter and a vacuum pump. For continuous conveying applications, a gatelock hopper with an inlet and outlet valve is installed at the discharge of the vacuum receiver.

Hopper BottomRail Car

Storage Silo

SecondaryFilter

Vacuum Return Line

Vacuum Filter/Receiver

FilterConveyingLine

PickupNozzle

VacuumPump

Level Control

GatelockHopper

Flexible Hose

Air Operated Valve

DC-5 Air

Saver Control

Pressure BalancedDC-5 Air Saver

17

Page 20: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

System Applications

HOPPER BOTTOM RAIL CAR

WEIGHHOPPER

BANBURYMIXER

ACCU-FLOVARIABLE RATESCREW FEEDER

SURGE BIN

TRANSPORTER

AIR CONTROLMODULE

LIFT-MATERAIL CAR UNLOADER

HIGH DENSITYVACUUM FILTER RECEIVER

CONVEYING LINE

MODU-KLEENBIN VENTFILTER

CARBON BLACKSTORAGE

SILO

HDV 8000 SYSTEM

HDP 4000 SYSTEM

SHAKEOUT SANDVIBRATORY SCREENFEEDER

BATCH HOPPER

CONVEYINGLINE

PREPAREDMOLDING SANDMULLER

SHAKEOUT SANDSTORAGE SILO

MULLERDISCHARGEDOOR

PREPAREDMOLDING SANDSURGE HOPPER

INLETCHUTE

MODU-KLEENBIN VENT FILTER

BOND PREMIXSURGE BIN

ACCU-FLOVARIABLE RATESCREW FEEDER

WEIGHHOPPER

AIR CONTROL MODULE

VIBRA-JETBIN AERATOR

TRANSPORTER

BELTFEEDER

AUTOMATICMOLDING MACHINE

HDP 4000 SYSTEM

HDP 3000 SYSTEM

HDP 3000 SYSTEM

18

Carbon black rail car unloading, vacuum conveying and dense phase pneumatic conveying

Foundry shakeout sand, bond premix and molding sand delivery system

Page 21: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

WEIGHHOPPER

BULKBAG

BULKBUSTERBULK BAGUNLOADER

AIR CONTROLMODULE

TRANSPORTER

BANBURYMIXER

ACCU-FLOVARIABLE RATESCREW FEEDER

SURGE BIN

MODU-KLEENBIN VENTFILTERCONVEYING

LINE

BAGBUSTERBAG BREAKER WITH CRUNCHER BAG COMPACTOR

HDP 3000 SYSTEM HDP 2000 SYSTEM

BULKBUSTERBULK BAGUNLOADER

MANUAL HOSE SWITCH

AIR CONTROLMODULE

VIBRA-JETBIN AERATOR

WEIGHHOPPER

BELLA

TWIN SHAFT FLUIDIZED ZONE MIXER

TRANSPORTER

CONVEYING LINE

SWITCHRECEIVER

MODU-KLEENBIN VENT FILTERSERIES 669

BAGBUSTERBAG BREAKER

BLENDCONSILO BLENDER

BLENDCON AIR BLENDING HEAD

DYNA-SLIDEHIGH PRECISIONAIR-ACTIVATEDFEEDER

BULKBAG

STORAGESILO

STORAGESILO

HDP 3000 SYSTEM HDP 3000 SYSTEMHDP 3000 SYSTEM

19

Carbon black bulk bag and small bag unloading and weighing system to a Banbury mixer

Small bag and bulk bag unloading to a weighing, mixing and silo homogenizing system to a bagging machine

Page 22: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

HDP 4000 SYSTEM HDP 4000 SYSTEMS

RECEIVING BIN

LEVEL CONTROL

TRANSPORTER

LOCOMOTIVE

MAINELECTRICALCONTROL PANEL

VALVE RECEIVER

LOCALELECTRICALCONTROL PANEL

VENT LINE

CONVEY LINE

TRUCK UNLOAD CONVEY LINE

STORAGE SILO

TRUCKUNLOADLINE FIRE CLAY

STORAGESILO

SHAKEOUTSANDSILO

SURGEBIN

SANDMULLER

ACCU-FLOVARIABLE RATESCREW FEEDER

SEA COALSTORAGE

SILO

SOUTHERNBENTONITESTORAGE

SILO

WESTERNBENTONITESTORAGE

SILO

MODU-KLEEN

BIN VENT FILTERSERIES 669

BOND PREMIX

STORAGE SILO

CONVEYINGLINE

WEIGHHOPPER

BLENDCONAIR BLENDER/TRANSPORTER

DYNA-SLIDEHIGH PRECISIONAIR-ACTIVATEDFEEDER

BULKPNEUMATICTRUCK

TRANSPORTERAIR CONTROLMODULE

MANUAL HOSE SWITCH HDP 4000 SYSTEM HDP 2000 SYSTEMHDP 2000 SYSTEM

20

Direct sanding system for railroad industry

Foundry bond unloading, storage, premixing and weighing system to a muller

System Applications

Page 23: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

MODU-KLEENDOWNDRAFTDUST COLLECTOR

ACCU-FLO SCREW FEEDER

SURGEHOPPER

CONVEYING LINE

TRANSPORTER

VIBRA-JETBIN AERATOR

VACUUM LIFTSTATION

AUTOMATED BAG BREAKER

TUFFER AERATOR/LUMP BREAKER

15 DEGREE 2-WAY SWITCH

WEIGH HOPPER

REACTOR VESSEL

HDP 3000 SYSTEM

AIR CONTROLMODULE

BULKBUSTER

HOIST STYLEBULK BAG UNLOADER

TRANSPORTER

ACCU-FLO

VARIABLE RATE SCREW FEEDER

WEIGHINGPLATFORM

PROTECTIVE CONTAINMENT BOX

BELLA FLUIDIZED ZONE MIXER

MODU-KLEENDOWNDRAFTDUST COLLECTOR

TRANSPORTER

LOADOUT SPOUT

MODU-KLEENDUST FILTER

TRUCK

VIBRA-JET BIN DISCHARGE SYSTEM

REACTORROTARY AIRLOCKFEEDER

DRUM DUMPER

RECEIVER BIN

WEIGH HOPPER

STORAGE SILO

CONVEYING LINE

AIR CONTROLMODULE

HDP 4000 SYSTEM

21

Automatic bag breaking, weighing and delivery system of chemical ingredients to reactor vessels

Bulk bag unloading of hazardous chemicals with precision mixing, storage and loadout to trucks

Page 24: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

AIR CONTROL MODULE

TRANSPORTER

INTERVENT

STORAGESILO

STORAGESILO

CONVEYINGLINE

DYNA-SLIDEHIGH PRECISIONAIR-ACTIVATEDFEEDER

WEIGHHOPPER

BLENDCONAIR BLENDERTRANSPORTER

MODU-KLEENBIN VENT FILTER

LEVEL CONTROL

SWITCH RECEIVER

ENDRECEIVER

HOPPER BOTTOMBULK RAIL CAR

MANUAL HOSE SWITCH

HDP 3000 SYSTEM

HDP 3000 SYSTEM

MINI-TRANSPORTER

AIR CONTROLMODULE

TRANSPORTER

EXHAUSTER

BAGBUSTERBAG BREAKER

BELLAFLUIDIZEDZONE MIXER

MODU-KLEENBIN VENT FILTER

SWITCH RECEIVER

LEVELCONTROL

SURGE BIN

ENDRECEIVER

CONVEYINGLINE

MIXER SURGE BIN

HDP 3000 SYSTEM

Bag breaking and mixing of dry chemicals to three surge bins

22

Rail unloading with gain-in-weight weighing and in-plant delivery system

System Applications

Page 25: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

BULKBUSTER FORKLIFT STYLEBULK BAG UNLOADER WITH INTERNALDUST COLLECTION AND BAG CLOSERS

MIXER

BULK BAG

MDP FEEDER

MDP 4000 SYSTEM

LOAD CELLS(LOSS-IN-WEIGHT)

CONVEY LINE

CENTRAL DUST COLLECTOR

MODU-KLEENBIN VENTFILTER

MODU-KLEENBIN VENTFILTER

VIBRA-JETBIN DISCHARGESYSTEM

VIBRA-JETBIN DISCHARGESYSTEM

MINI-PUSHER

HDP 2000 SYSTEM

CONVEYINGLINE

DUMPTRUCK

DUSTCOLLECTOR

FINESSTORAGE

SILO

BELLAFLUIDIZEDZONE MIXER

TRUCK LOADINGSPOUT

23

Central dust collector unloading, dense phase pneumatic conveying and agglomeration to truck disposal

Bulk bag unloading with loss-in-weight weighing and batching system

Page 26: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

ENDRECEIVER

SWITCHRECEIVER

HOPPER BOTTOMBULK RAIL CAR

LEVELCONTROL

MODU-KLEEN BIN VENT FILTER

90 DEGREE DIVERTER INTERVENT

TRANSPORTER

HDP 4000 SYSTEM HDP 3000 SYSTEM

DYNA-SLIDE

AIR-ACTIVATEDCONVEYOR

AIR CONTROL MODULE

CENTRAL DUST COLLECTOR

MODU-KLEENDUST COLLECTOR

TRANSPORTER

HDP 2000 SYSTEM COMMON CONVEYING LINE

MODU-KLEENBIN VENT FILTER

STORAGESILO

ENDRECEIVER

AIR CONTROL MODULE

ELECTRICALCONTROLPANEL

Rail unloading and in-plant delivery system

24

Dust removal system without a screw conveyor

System Applications

Page 27: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

ENDRECEIVERLEVEL

CONTROL

MODU-KLEEN

BIN VENT FILTER

TRANSPORTER

AIR CONTROLMODULE

CONVEYINGLINE

LOW PROFILE TRANSPORTER

HDP 3000 SYSTEM HDP 4000 SYSTEM

PORTABLE CAR UNLOADER

DYNA-SLIDE

AIR-ACTIVATED CONVEYOR

MANUALHOSE SWITCH

HOPPER BOTTOMBULK RAIL CAR

BATCHHOPPER

LEVELCONTROL

MODU-KLEEN

BIN VENT FILTER

SILORECEIVER

ENDRECEIVER

SWITCHRECEIVER

TRANSPORTER

MANUAL HOSE SWITCH

VACUUMBLOWER

CONVEYINGLINE

DYNA-SLIDE

AIR-ACTIVATEDCONVEYOR

HOPPER BOTTOMBULK RAIL CAR

AIR CONTROLMODULE

LIFT-MATERAIL CAR CONNECTOR

LDV 2000 SYSTEM

HDP 3000 SYSTEM

HDP 3000 SYSTEM

25

Rail unloading and in-plant delivery system

Vacuum-pressure rail unloading utilizing both dilute and dense phase systems

Page 28: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

AIR CONTROL MODULE

STORAGESILO

STORAGESILO

STORAGESILO

CONVEYINGLINEDYNA-SLIDE

HIGH PRECISIONAIR-ACTIVATED FEEDER

WEIGHHOPPER

BLENDCONAIR BLENDERTRANSPORTER

MODU-KLEENBIN VENT FILTER

LEVEL CONTROL

SURGEBIN

SWITCH RECEIVER

ENDRECEIVER

ELECTRICALCONTROLPANEL

HDP 4000 SYSTEM

AIR CONTROL MODULE

TRANSPORTERON LOAD CELLS

ELECTRICALCONTROLPANEL

ACCU-FLOVARIABLE RATESCREW FEEDER

SLIDE GATE

HDP 3000 SYSTEM

CONVEYINGLINE

MODU-KLEENBIN VENT FILTER

STORAGE SILO STORAGE SILO

SURGE BIN

LEVELCONTROL

BELLATWIN SHAFTFLUIDIZED ZONEMIXER

Weighing and batching

26

Gain-in-weight weighing and batching and conveying system

System Applications

Page 29: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

AIR CONTROL MODULE

BLENDCONSILO BLENDINGHEAD

BLENDCONSILO BLENDER

TRUCK

TRUCK LOADING SPOUT

MODU-KLEENBIN VENT FILTER

ELECTRICALCONTROLPANELBAGGING

MACHINE

45 DEGREEDIVERTER

LEVEL CONTROL

ENDRECEIVER

EXHAUSTER

MODU-KLEENBIN VENT FILTER

HDP 4000 SYSTEM

ENDRECEIVER

LEVELCONTROL

SLIDE GATE

STORAGESILO

MODU-KLEEN BIN VENT FILTER

MODU-KLEEN BIN VENT FILTER

AIR CONTROL MODULE

TRANSPORTER

ELECTRICALCONTROLPANEL

HDP 5000 SYSTEM

Silo blending and in-plant delivery system

Continuous in-plant delivery system

27

Page 30: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

Process System Components

28

Bella® XN Fluidized Zone Batch Mixer

Bella XN Dryer/CoolerBella XN Continuous Mixer

Blendcon Silo Blending Head, 16-port, Series 816

Blendcon® Silo Blending Head, 16-port, Series 685

Modu-Kleen® Bag Type Bin Vent Filter

Modu-Kleen Downdraft Cartridge Type Dust Collector

Bella Portable Mixer/Dryer/Agglomerator

Bella XN Mixer/Dryer

Quik-Vent® Vacuum Pressure Relief Valve

Modu-Kleen Cartridge Type Vacuum Filter/Receiver

Modu-Kleen Cartridge Type Bin Vent Filter

Modu-Kleen Modular Type Bin Vent Filter, Series 669

Modu-Kleen Modular Type Bin Vent Filter, Series 725

Blendcon Air Blender/Transporter

Modu-Kleen Two Stage Bin Vent Filter/Dust Collector

Page 31: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

29

Big SandyTM Direct Sanding Module

Little SandyTM Portable Locomotive Sanding System

HeftyTM Load-Out Spout SpoutMasterTM Adjustable Fill Spout

Lift-MateTM Truck & Rail Car Connector

Rail-Kart® Vacuum Unloading Device

Transporter, Model J

Mini-Pusher Portable Mini-Pusher Super-MaxTM Vacuum/Pressure Unloader

Transporter, Model L Transporter, Model JT

Pipe Couplings

Rail-Kart Portable Vacuum Rail Car Unloader, with Lump Crusher

Mini-Transporter

Mobile Truck LanceTM

Truck Filling System

Page 32: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

Process System Components

30

Dyna-Slide High Precision Air-Activated Feeder

Accu-FloTM Variable Rate Screw Feeder

Dyna-SlideTM Air-Activated Gravity Conveyor

Accu-Flo Pivoting Screw Feeder

Iso-LiftTM Flexible Screw Conveyor

Switch Receiver Valve ReceiverEnd Receiver Silo Receiver

Tuffer ® Aerator/Lump Breaker

Tuffer Aerator/Lump Breaker, Pin Mill Style

Oil Weigh System for Rubber Mixers

Posi-fl ate® Infl atable Seated Butterfl y Valve

Infl atable Seated Knife Gate Valve

Quiet-Pac® Positive Displacement Blower

Quiet-Pac Positive Displacement Blower, Sound Attentuating

Page 33: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

31

Crossover Switch

2-Way Sliding Switch

90 Degree Diverter

15 Degree 2-Way Switch 15 Degree 3-Way Switch3-Way Sliding Switch

Multi-Port Switch, Horizontal

Explosion Proof Rotary Spout

Superslik®Abrasion Resistant Tubing Bends

Long Radius Ceramic Lined Tubing Bend

Expansion Joint

X-SizeTMAutomatic SamplerView-X ®Sight Tubes Multi-Port Switch, Vertical

Rotary Switch

Plain, Hard Iron and Ceramic Tubing Bends

Page 34: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

Process System Components

32

BagBuster® Bag Breaker with Cruncher® Bag Compactor

Bulk Bag Slitter

ScruncherTM Screw Type Bag Compactor

BagBuster Bag Breaker with Vibrating Screener

BulkBusterTM Bulk Bag Unloader, Model F1900

BulkBuster Bulk Bag Unloader, Model F100

BulkBuster Bulk Bag Unloader with Scissor Lift

PLC Control Panel

GYRO EX TM Bin Activating Feeder and Discharger

GYRO TM Loss in Weight Feeder

Circular Vibratory ScreenVibratory Bin Discharger

DC-5® Air Saver Control DC-5® Stainless Steel Air Saver Control

Vibra-Jet® Bin Aerator, Model D and Model K

Vibra-Jet® Bin Discharger

Page 35: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

33

K-TYPE Screen Feeder, Suspension Mounted

L-TYPE Vibratory Pan Feeder, Base Mounted

L-TYPE Two-way Vibratory Feeder, Suspension Mounted

STEDI-COILTM Vibratory Conveyor

STEDI-FLEX TM Vibratory Conveyor, Base Mounted

L-TYPE Vibratory Pan Feeder, Suspension Mounted

STEDI-FLO Vibratory Pan Feeder, Suspension Mounted

STEDI-FLO Rotating Vibratory Feeder, Base Mounted

STEDI-FLO Furnace Charging Feeder

TRENCH-TITE TM Vibratory Conveyor

STEDI-FLO Vibratory Feeder, Suspension Mounted

STEDI-FLO TM Vibratory Pan Feeder, Base Mounted

EZ-WERKTM Foundry Shakeout

EZ-WERK Foundry Shakeout

Two-Way Foundry Shakeout

STEDI-FLO Vibratory Screen Feeder, Base Mounted

Page 36: Sixteen Pneumatic Conveying Conceptspneumatic conveying system and, using our LDP 2000 dilute phase pneumatic conveying system, we can convey at velocities well over 7000 feet per

www.dynamicair.com

Corporate HeadquartersDynamic Air Inc.1125 Willow Lake Blvd.St. Paul, MN 55110 USA

Phone +1 651 484 2900 Fax +1 651 484 7015Email [email protected]

Printed in USA • © 2018 Dynamic Air Inc.

Bulletin 9906-9

Dynamic Air Conveying Systems®, BagBuster ®, Bella®, Blendcon®, Cruncher ®, DC-5®, HDP4000 Full Line Concept ®, HDP5000 Full Line Continuous Concept ®, Modu-Kleen®, Quiet-Pac®, Quik-Vent ®, Rail-Kart®, Superslik®, Tuffer ®, Vibra-Jet ® and View-X® are registered trademarks of Dynamic Air Inc., St. Paul, MN USA. Posi-fl ate® is a registered trademark of Posi-fl ate, St. Paul, MN USA.

United KingdomDynamic Air Ltd.26 Peverel Drive, GranbyMilton Keynes, MK1 1QZUnited KingdomPhone +44 (0)1908 622344 Fax +44 (0)1908 646633Email [email protected]

BrazilDynamic Air Ltda.Av. Mathias Lopes, 582112960-000 Nazaré Paulista SPBrazilPhone +55 11 4597 8000Fax +55 11 4597 8001Email [email protected]

ChinaNo. 21, Lane 2Suide Road, Putuo DistrictShanghai 200331P. R. ChinaPhone: +86-21-6432-5188 +86-21-6432-5141 +86-21-6432-5619Fax: +86-21-6432-6101E-mail: [email protected]


Recommended